If we don't have a connection at startup or we transition from
having a connection to not having a connection, we need to make
sure we hide the correct indicators.
There's only two uses of the parameter left, which can easily be added as a
separate line below. Since it's really a private interface meant for the
indicators, make it private as well so external users are less likely to
use it.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
We can't silently replace the old behavior of separate status
icons into a new system. Replace SystemStatusButton with a new
SystemIndicator class which will allow for the flexibility we
need. For now, make it a subclass of Button so that it mostly
feels the same, but we'll soon be swapping it out with a dummy
implementation that the aggregate menu will use.
I think the code cleanup here is worth it.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
Remove the Wi-Fi chooser from the menu and put it in a dialog instead.
This frees up the submenu to simply have three items: an rfkill toggle,
a button to show the dialog, and a button to show network settings.
Ideally, we'd autodetect the "needs network" case by user initiation
and automatically show the dialog if needed, but lower-level plumbing
is neccessary, so the menu item to show the dialog is an acceptable
compromise instead.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Since the network section of the aggregate menu will be shown in the lock
screen, we need to ensure that users can't tweak with network settings or
anything like that.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Replace NMNetworkMenuItem with NMConnectionItem, based on
NMVPNConnectionItem, and replace NMDevice with NMConnectionSection
and NMConnectionDevice.
Since this rips apart NMDevice, and since wi-fi should not be
connection-based, we'll temporarily remove NMDeviceWireless. We'll
add it back in a later commit, along with the new Wi-Fi dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Instead, just add them after they're constructed. This allows us to
not have to pass the connections to each device, and prevents issues
with having to enumerate the connections in the middle of construction.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
Note that this does have an interesting side effect of not showing
network connectivity status on wired. This is intentional, and error
states will still be shown in the top bar when they happen.
This also means that if you're connected to both wired and wireless,
even though wired is the default route, we'll first notice the wireless
active connection, and we'll show that in the top bar. New NM API that
will help figuring out the active connection of the default device is
being implemented to stop this from happening.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
The code is complicated by requiring overflow, and in order to incrementally
improve the code to match the designs, remove overflow.
In the new design, we'll have a fixed number of menu items, and Wi-Fi
will be done by a separate design, so we can't be too concerned with
the menu not fitting on the screen.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
According to Dan Williams, if firmware is installed the device
will disappear and reappear, and this is unlikely to change any
time soon. Just make our lives easier by removing the tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
I intended to make a few code cleanups, but I apparently forgot
to hook up _updateAccessPoint. Merge it with _activeApChanged,
which is where the notify::active-access-point signal is actually
hooked up to.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
_updateIcon should not attempt to sync any active connections, as the
icon-changed signal can be emitted in response to something done during
_syncActiveConnection. In the case of VPN, removeActiveConnection would
cause an icon-changed signal to be emitted immediately, but the state
would not be updated, causing us to call removeActiveConnection over and
over.
Explicitly sync all active connections when we know it needs to be done,
and simply make _updateIcon synchronize with the current device's icon.
https://bugzilla.gnome.org/show_bug.cgi?id=703565
The status item will go away soon, so make sure the one-time
fire is given its own function. At the same time, only connect
to the signal when the situation actually matters.
https://bugzilla.gnome.org/show_bug.cgi?id=701954
No class in here has this.carrier as a property. Presumably, this was
meant to be this.device.carrier, but since this code is going to be
rewritten soon anyway, might as well just junk the never-working
code for now.
https://bugzilla.gnome.org/show_bug.cgi?id=701954
This can be more easily achieved by listening for changes to the
device's active-connection property. VPN will still need support to
track active connections, as it does not have an associated
device. But as VPN can track multiple active connections, the names
"set" and "clear" don't quite fit. Rename them to the more-standard
"add" and "remove".
https://bugzilla.gnome.org/show_bug.cgi?id=701954
As multiple-connections for a Wi-Fi AP won't fit in the new design,
remove submenus right now. Simply make a simple item that connects
to the first known connection for the AP, which should be the common
case.
https://bugzilla.gnome.org/show_bug.cgi?id=698918
This is technically a smidge slower due to the constant bisect insert,
but since this should only happen when we make a Wi-Fi dialog, it's
insignificant.
https://bugzilla.gnome.org/show_bug.cgi?id=700322
Only ACTIVE or ACTIVATING connections are important when deciding
what icon to show, don't fallback on any, possibly invalid or deactivating,
active connection object.
https://bugzilla.gnome.org/show_bug.cgi?id=676285
We put these "access point objects" in "this._networks" and
"this._activeNetwork", so let's rename it. This also makes
the fact that each "access point object" can contain multiple
access points a tiny bit less confusing.
https://bugzilla.gnome.org/show_bug.cgi?id=698918
NM is now a lot smarter about dealing with automatic connections, so just
create an empty connection and pass it to it. The only places where NM
requires connection settings is where we require explicit setup: Bluetooth
DUN, WPA-Enterprise and WWAN/VPN. These cases are already handled by
gnome-control-center, where complex configuration is handled, so remove
the automatic connection management for now and just let NM handle it.
https://bugzilla.gnome.org/show_bug.cgi?id=698918
NMClient recently got more heavyweight, with a property holding supported
connections. As fully initializing a NMObject is a recursive operation
and requires multiple DBus calls, switch to async initalization for NMClient
and NMRemoteSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=683288
LTE-only modems need to be treated as GSM/HSPA modems, as they all are 3GPP
modems and they all need the same kind of configuration (APN, user, password,
PIN...).
https://bugzilla.gnome.org/show_bug.cgi?id=688144
ModemManager >= 0.7 comes with a new DBus interface. This patch makes the shell
work with the new interface if the modem is detected as being exposed by the new
ModemManager (based on the device.udi string reported by NM).
https://bugzilla.gnome.org/show_bug.cgi?id=687359.
Some notifications, despite being emitted by shell code, should appear
to be from application or "separable" system components. Do that by
associating them with a notification-daemon policy.
Note that for this to look really good, empathy should rename itself
to Chat.
https://bugzilla.gnome.org/show_bug.cgi?id=685926
syncSectionTitle looks at device list for the section, to understand if
the section should be visible or not, so obviously it needs to see the
new device.
I wonder when this broke.
https://bugzilla.gnome.org/show_bug.cgi?id=692749
NM 0.9.7 is still not released even as a tarball, so fix this to work
with 0.9.6 again for now (although it doesn't do any device name
disambiguation in this case now).
https://bugzilla.gnome.org/show_bug.cgi?id=691720
If present, InfiniBand devices show up with the ethernet devices (and
the presence of an InfiniBand connection will cause "Wired" to be
renamed to "Ethernet").
https://bugzilla.gnome.org/show_bug.cgi?id=677150
Remove section titles for ethernet and mobile broadband, and replace
them with device status items that recognize if multiple devices are
installed in the same section, and if so automatically disambiguate.
https://bugzilla.gnome.org/show_bug.cgi?id=677142
Stop pretending that VPN is a NMDevice, and split the useful bits into
a NMConnectionBased interface.
Make each connection have its own switch menu item and handle its own
status, and remove the VPN section title, which is no longer needed.
https://bugzilla.gnome.org/show_bug.cgi?id=682929
The selector for insensitive popup menu items was wrong (a PopupMenuItem is
a ShellGenericContainer, not a StButton). Fixing it showed that previous
:insensitive tracking was manual for a reason: we have many items that are
not reactive, but don't want the insensitive styling (for example those in
the battery menu).
Fix it by adding a new style-class, popup-inactive-menu-item, that is added
to all new PopupMenuItems that are not activatable.
https://bugzilla.gnome.org/show_bug.cgi?id=683988
Since we eventually want to add a system for changing the top panel
contents depending on the current state of the shell, let's use the
"session mode" feature for this, and add a mechanism for updating the
session mode at runtime. Add support for every key besides the two
functional keys, and make all the components update automatically when the
session mode is changed. Add a new lock-screen mode, and make the lock
screen change to this when locked.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
Previously, when toggling a switch on we tried to replicate NM policy and
find a good connection to activate. This is broken in many situations.
Instead, only activate something when we can be sure it's what the user
wants (i.e. when there is only one connection, or when there is none,
and thus connecting will trigger the config dialog)
https://bugzilla.gnome.org/show_bug.cgi?id=683136
The design has a combined volume-network-power indicator in the lock
screen, which when opened shows a volume slider. Implement it by abstracting
the volume menu into a PopupMenuSection, and by creating three StIcons
bound to the real ones.
https://bugzilla.gnome.org/show_bug.cgi?id=682540
Don't log a warning if an unrecognized device type is seen.
Don't show slave connections in the menu. (Eg, don't show the
individual wired connections making up a bond, since they can't be
used individually.)
Make the icon only reflect the status of connections that are visible
in the menu. (ie, don't show the "connecting" icon when an
unrecognized connection type is connecting, and don't show a
"connected" status if the only active connections are of unrecognized
types.)
https://bugzilla.gnome.org/show_bug.cgi?id=682364
Track locked status and use it to provide a reduced version of
the panel in the locked screen. Accessibility, input sources and
volume menus are preserved, without the link to the control center.
Network, battery and user menu are reduced to pure indicators,
with no menu.
This is similar to the design but not exactly, because designers
in IRC said that network needs more analysis before exposing, and
because the design didn't account for a11y and IM (so the one menu
metaphor is not really appropriate).
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Wifi and mobile broadband have signal indicators and are thus
more useful than vpn icons in the panel. Therefore, in the case
we have both wifi/3g and VPN we prefer the former as the "primary
icon" and add a lock next to it.
Behavior when VPN is added to wired or other connections is still
preserved: the wired icon is replaced by vpn.
https://bugzilla.gnome.org/show_bug.cgi?id=672591
Sorting by strength is what the other OSes do by default, and it
provides a better UX (by offering your hotspot and router before
the one from your neighbor).
https://bugzilla.gnome.org/show_bug.cgi?id=658946
Refactor NMDeviceVPN to be more like the other NMDevices, including
having a valid getSectionTitle() and emitting signals when the
underlying connection changes state.
Use the existing notification infrastructure to hook these signals
to actual notifications (including some code consolidation).
https://bugzilla.gnome.org/show_bug.cgi?id=676330
Ensure that the UI is updated when a connection changes name or id,
even if it was already known by a device.
Also, use less private properties on NMConnection objects, as they
can become stale and cause problems.
https://bugzilla.gnome.org/show_bug.cgi?id=677097
For most subclasses, this is a direct swap -- a lot of the time, the
constructor was a blank class that override createNotificationIcon,
and called _setSummaryIcon in _init.
https://bugzilla.gnome.org/show_bug.cgi?id=661236
