Before, separators naively checked whether their siblings were visible
using actor visibility. However, if section actors are visible but have
no visible children, this will fail. Special-case separators when doing
visiblity checks.
https://bugzilla.gnome.org/show_bug.cgi?id=707801
Triangles should be flipped in RTL. This is the easiest way to do it that
doesn't rely on modifying the rotating logic, though it is a bit hacky since
the ClutterActor "scale-x" property technically considers the lower bound
to be 0. It works, though.
When the triangle rotates (when sub-menu is expanded), it seems as if
the triangle pivots from one corner even though rotation center is set
to Clutter.Gravity.CENTER. Hence the rotation center is set nearer to
the edge than to the corner ([0.3, 0.5] instead of [0.5, 0.5]) so that
it doesn't appear odd.
Also pivot_point is used instead of rotation_center_z_gravity as it is
deprecated.
http://bugzilla.gnome.org/show_bug.cgi?id=703109
This code is too complicated to keep, and the last straw came after the
fixed width menu in the aggregate menu design.
This will break some existing popup menus that rely on the fixed width,
but this will soon be replaced with the aggregate menu. We'll also soon
clean this up further by replacing PopupBaseMenuItem's custom layout code
with an StBoxLayout.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
We need to make sure that we reset the opened submenu when we close the
submenu, not trick the toplevel into thinking a closed submenu is the
currently opened menu.
https://bugzilla.gnome.org/show_bug.cgi?id=704336
This way, if a parent is insensitive, all children will be, too.
Though PopupSubMenus will be forced closed, PopupMenuSection needs
the propagation.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
Doing it at the end has confusing semantics, especially as there is
this point where isOpen is true, but the corresponding open-state-changed
has not been emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
Use ClutterActor.allocate_align_fill() so we don't have to do
this math ourselves. At the same time, clean up the RTL handling
so that it's easier to follow.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
It seems this behavior at one time was intentional, but I (along with
the designers) think it looks ugly having the menu having its insides
shrinking and shifting around while fading out of existence.
There's two cases where we currently explicitly try to animate the
submenu closed -- when an item is clicked inside the submenu, and
when the toplevel closes. This removes both of those.
The user expectation is that submenus will be closed the next time the
toplevel is open even if they were open before, so force submenus closed
when the toplevel finishes fading out, without any animation.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
As the aggregate menu will be built out of sections from each
of the menus, we need to ensure that activating an item in one
of these sections can close the main menu, even when it is not
a menu item. The new API also needs to be flexible enough to
ensure that animations can be controlled, like the buttons that
lock the screen or launch a new session.
Port the user menu to use this new API as well.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
While the default style works well will a solid handle, using both
border and fill color would be desirable in classic mode. Add the
necessary (optional) style properties to allow this.
https://bugzilla.gnome.org/show_bug.cgi?id=697917
Since commit c84dc6254d, popup menus are closed automatically
when another menu opens (to catch the case where a menu is opened
by keyboard shortcut, which wasn't handled before). However in the
case of child menus, both child and parent are expected to be visible,
so handle this case explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=699678
We already do this when navigating between menus via mouse or
keynav, but miss cases where a menu is opened by other means,
for instance via a keyboard shortcut.
https://bugzilla.gnome.org/show_bug.cgi?id=686756
Currently all keybindings are disabled while some popup menu is open.
However some keybindings may still be useful in some cases, so expose
GrabHelper's modal params parameter to allow specifying a keybinding
mode for particular menus.
https://bugzilla.gnome.org/show_bug.cgi?id=698938
This simplifies the code required to build remote menus and
put all the items in the right place, and makes us share our
implementation with GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=698427
This makes it easy to replace the dot with another label in the future.
Change the allocation logic, as text layout is more complicated than
simple icon logic.
https://bugzilla.gnome.org/show_bug.cgi?id=698427
gnome-control-center is planning on removing its own tree in the
future. Since it already installs these applications into
/usr/share/applications, just use this for now.
https://bugzilla.gnome.org/show_bug.cgi?id=692483
Due to limitations and bugs in SpiderMonkey's GC, wrapper objects
for cairo contexts and similar may not get cleaned up immediately
after repainting, leading to leaking memory. Explicitly disposing
of such objects after they're not needed can clean up large portions
of memory for cairo surfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=685513
Allow users to smoothly scroll on the volume indicator icon
to adjust the volume. Do this by simply passing the scroll
event to the slider inside the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=687573
BoxPointer's API changed to take a BoxPointer.PopupAnimation
enumeration value, but the code was accidentally replaced with
older code when porting the PopupMenuManager code to GrabHelper.
https://bugzilla.gnome.org/show_bug.cgi?id=689954
"toggle" is used when clicking on the source actor. As we don't
actually have a menu, we don't want to actually take any grabs
through the menu system, so make it a no-op rather than have it
toggle the menu state.
https://bugzilla.gnome.org/show_bug.cgi?id=689954
Currently close() is a no-op when the menu has already been closed.
However, repeated calls could pass different animation parameters.
For instance in the user menu, we try to hide the menu immediately
before locking the screen, to avoid the popup jumping across the
screen while fading out - as we do this from the corresponding
item's activate handler, the closing is still animated if the menu's
own handler (which requests a full animation) is run first.
Fix this by changing close() to overwrite ongoing animations before
bailing out early.
https://bugzilla.gnome.org/show_bug.cgi?id=686484
With the recent session mode changes, the visibility of settings
items is now only set on sessionMode::updated - while the signal
is emitted when the session mode is initialized, settings items
that are added after that are visible regardless of the allowSettings
setting until the next sessionMode::updated signal is received.
Fix this by explicitly setting the initial visibility of settings
items.
https://bugzilla.gnome.org/show_bug.cgi?id=684473
The selector for insensitive popup menu items was wrong (a PopupMenuItem is
a ShellGenericContainer, not a StButton). Fixing it showed that previous
:insensitive tracking was manual for a reason: we have many items that are
not reactive, but don't want the insensitive styling (for example those in
the battery menu).
Fix it by adding a new style-class, popup-inactive-menu-item, that is added
to all new PopupMenuItems that are not activatable.
https://bugzilla.gnome.org/show_bug.cgi?id=683988
Hidden children are currently ignored in width requests; in the
case of submenu items, this results in abrupt width changes of
open menus when the corresponding SubMenuMenuItem is toggled.
To fix, only ignore SubMenu children when the corresponding
SubMenuMenuItem is hidden as well.
https://bugzilla.gnome.org/show_bug.cgi?id=683485
The special padding rules for submenu items currently ensure that
content aligns properly when the scrollbar is shown. While they
work nicely for the network menu, it looks odd for non-scrolled
submenus, so make this case explicit by introducing a :scrolled
pseudo class and adjust the style rules to use it.
https://bugzilla.gnome.org/show_bug.cgi?id=683009
Since we eventually want to add a system for changing the top panel
contents depending on the current state of the shell, let's use the
"session mode" feature for this, and add a mechanism for updating the
session mode at runtime. Add support for every key besides the two
functional keys, and make all the components update automatically when the
session mode is changed. Add a new lock-screen mode, and make the lock
screen change to this when locked.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
PopupMenuBase relies on open-state-changed to update the separator
visibility, but PopupMenuSection were only emitting when the parent
closed, so the first time the menu was opened, separator visiblity was
wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=682998
StScrollBar was intercepting motion events by using captured-event on
the stage, which required additional dirty tricks, which required
additional hacks. Simplify it by just using clutter_grab_pointer()
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=671001
In some cases can_focus value is taken directly as
!reactive. But this is not the case anymore, as
we are interested on navigate on non reactive items
https://bugzilla.gnome.org/show_bug.cgi?id=667439
Track locked status and use it to provide a reduced version of
the panel in the locked screen. Accessibility, input sources and
volume menus are preserved, without the link to the control center.
Network, battery and user menu are reduced to pure indicators,
with no menu.
This is similar to the design but not exactly, because designers
in IRC said that network needs more analysis before exposing, and
because the design didn't account for a11y and IM (so the one menu
metaphor is not really appropriate).
https://bugzilla.gnome.org/show_bug.cgi?id=619955
clutter_actor_get_children requires making a temporary GSList from
a linked list structure, and then creating a JS Array from that GSList.
For simple cases like the number of children, use clutter_actor_get_n_children.
https://bugzilla.gnome.org/show_bug.cgi?id=677426
Do not overflow currentItems array. If the Menu section is filled
via model items-changed callback the position in the model passed to
the RemoteMenu _modelChanged can be a to be added asynchronously
action-added. Thus the item does not yet exists in the currentItems.
https://bugzilla.gnome.org/show_bug.cgi?id=676447
Rather than accessing global.session_type / global.session_mode
all over the place, delegate mode information to a dedicated
sessionMode object. While not very useful for now, we will replace
checks for a particular mode with checks for particular properties
that sessionMode defines based on global.session_mode.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
