We're storing in the texture cache images and scaled images appending
the scaling factor to the key. When a file changes the cache key
corresponding to that file is removed, but not the keys for the scaled
ones so that images in the cache are never reloaded.
This patch removes all keys from the cache related to the file that
changes, including those with the scaling factor.
A new set (hash table) was added to keep track of scale used to be able
to remove all possible images in the cache.
When the KEY is removed from the cache, we can look now in the scale set
for and each scale we also remove the key "KEY1.000000", "KEY2.000000",
etc.
Assuming that the number of used scales is small (I would typically
expect one or two), the overhead should be negligible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/567
If the GNOME shell crashes, we run a service that may disable
extensions. This is important so that users will not be locked out of
their own session in case an extension is causing crashes.
As this is a very agressive action, we tried to only do this in the
first two minutes of the session. Unfortunately, the logic was broken
and would result in an unclean session shutdown.
Fix this by using the newly introduced gnome-shell-disable-extensions
file. This is created by the extension subsystem for a period of time to
indicate the extensions may be the cause of a gnome-shell failure.
See
https://gitlab.gnome.org/GNOME/gnome-session/issues/43
for a log of the bug happening and the gnome-session part to fix this.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/858
When the extension system is loaded, create the
gnome-shell-disable-extensions file in the users runtime directory. This
file is automatically removed 60s later. The sole purpose of this file
is to be consumed by the systemd units. If the file exists, the systemd
units will disable extensions when the gnome-shell fails.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/858
The whitelist is a list of well-known D-Bus names, which we then search
for the unique name we get from the method invocation - unsuccesfully.
Fix this by watching the bus for any name in the whitelist in order
to maintain a map from wel-known to unique name that we can use for
matching.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1916
Since the notification message close button had no border, or mouse
over effect, there was no way to determine whether the mouse cursor
were over the button.
Improve this by adding a message-close-button class for the close
button, and a styling for its hovered state, based on media control
button styling.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/855
Increases contrast between normal and hovered states in
message-media-control buttons. Previously there was very little
difference between the two states, making it hard to distinguish
whether the mouse cursor was over the button.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/855
When removing a string from a settings list, we iterate over all
existing entries and copy all strings except the one that's being
removed to a new list, which is then written to GSettings.
However we currently always increment the index, so we end up with
a NULL entry in place of the removed entry, which is then interpreted
as the end of the list. In other words, we also remove all entries
that follow the removed string.
Fix this by looping over the list entries instead of the index, and
only increment the index for entries we copy.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1946
Currently when dragging an icon to the space above or below the appGrid
to switch pages, we do so very quickly without checking when the last
page-switch happened. This makes it hard to move icons to pages which
are not the first or the last one, since the other pages are skipped
very quickly.
To fix this, add a timeout of 1 second that blocks switching pages after
a page-switch using drag overshoot occured.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1693
We currently always switch app pages when a dragged app icon
moves outside the grid boundaries, regardless of any previous
page switches. This makes it too easy to switch multiple pages
accidentally, so add a small threshold that the icon has to
move back towards the grid before allowing another page switch.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1693
There's no need for a `inhibitEventBlocker` interface. Since we connect
to "open-state-changed" of our folders in the AllView anyway, we can
just make the event blocker visible while a folder is opened, and hide
the event blocker during DnD.
This allows keeping the eventBlocker reactive at all times and fixes an
issue where DnD to create a new folder is impossible if no folders are
present because the eventBlocker would not get inhibited.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1652
Emitting ::drag-end after changing the slider value via arrow keys
was a cheap way to make the sound feedback work for keyboard input.
But now that the volume indicator plays the sound on ::value-changed
as well, we can stop doing that - after all, key presses aren't drags.
Besides that, this will make the limiting of feedback to actual volume
changes from the previous commit work for key events as well.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
gnome-settings-daemon doesn't play the volume change sound when
the volume stayed the same (that is, it is already at its maximum
or minimum). This looks like the right thing to do, so copy its
behavior.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
Commit 8d4855f100 accidentally removed the volume change feedback
for scroll events. Add it back to be consistent again with moving
the slider via arrow keys, slider drags/clicks and gsd's media keys
handling.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
While those should be concise enough to fit, they may not where
temperatures drop into double-digit negatives. It seems better
to accept some awkward horizontal scrolling in that case than
shorten relevant information.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1926
Commit b779f6f728 added a check to filter out invalid weather forecasts.
However the check is currently done when creating UI for the forecasts,
which means we end up with fewer forecasts than we could display if any
forecasts are invalid.
We can avoid that issue by checking the validity while collecting the
forecasts, so do that instead.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
We currently always start with the current weather info, then append
forecasts. This is slightly confusing, as the only hint that the
first item is special is the past (and potentially "odd") time.
Stop doing that and base all items on forecasts.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
As we get closer to midnight, we show fewer forecasts than we could
fit, or none at all. It makes more sense to continue the forecasts
into the wee hours in that case, so only exclude past forecasts,
but not ones from following days.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
Weather stations can have unwieldy long names, which don't fit the
limited space we have available. City names are usually more suitable,
so use the name of the nearest city instead if possible.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
In case of a very long location name, the label may take up all
available space. Make sure there is at least some spacing between
header and location in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
The two labels use different font sizes, so they don't align properly.
Unfortunately we don't have BASELINE alignment in Clutter, but at least
END comes closer than the default FILL.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
Commit c899453800 lifted the requirement of switcher keybindings
to contain a modifier, however it is currently only possible to
finish it by letting it time out.
Improve that by also accepting space/enter key presses to confirm the
selection immediately.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1883
The noModsTimeout obviously finishes inside a timeout callback, which
means `global.get_current_time()` might return Clutter.CURRENT_TIME (ie.
0) when called inside it, because it's not called while handling an
event. This means when switching apps or activating a window, the
timestamp passed to `activate_window` may be 0, which is the reason why
the altTab switcher is currently broken when using modifier-less
keybindings.
Fix that by using `meta_display_get_current_time_roundtrip`, which
always return a valid timestamp, instead of
`shell_global_get_current_time`.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/847
Remove setCurrentPage() function, introduce setCurrentPosition() instead,
which allows to have fractional positions.
Make inactive dots smaller, filled and partially transparent, as opposed to
larger and fully opaque active dot. Make dots smaller overall, remove
borders. Interpolate each dot between active and inactive state based on
scroll position.
Make it impossible to "uncheck" the active dot.
Thanks Florian Müllner for parts of the code.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1932https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/843
We slightly delay showing the switcher popup to avoid flashing it
briefly in the common case of quickly switching back-and-forth
between two windows.
However some users perceive this delay as slowness. Address this by
showing the popup immediately when another key press is consumed
(that is, a key like Tab is pressed).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1928
Since the mpris implementation of the notification tray supports showing
multiple notification (one for each player), it doesn't make sense to
have only one global property to store the message, since that only
allows referencing one message at a time.
Instead, handle the MediaMessages completely inside the scope of
`_addPlayer()`, this should allow showing more than one message again,
which broke with commit 4dc44304df [1].
[1] https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/791https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/833
Because the message actor could also be undefined or a already
deallocated ClutterActor, we sometimes fail to show the error message
and get an error from Gjs instead.
So make sure we always log the proper error message and just leave out
the actor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/833
It may happen that the app icon is destroyed with a drag
monitor still around, in which case, a load of warnings
will be shown.
Make sure to remove any pending drag monitor on destroy.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
When removing the last icon of a folder, FolderView first removes
the folder from org.gnome.desktop.app-folders.folder-children, then
proceeds to reset all its keys, which removes the relocatable schema.
That order of operations turns out to be problematic. Removing the
folder from 'folder-children' destroys the folder icon, which in turn
destroys the folder view, which throws a load of warnings in the
journal.
Fix that by removing the folder after resetting the schema keys. In
fact, what we're doing here is not using 'this' anymore.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
The variable that holds the list of application icons is
called 'newApps', but that technically was never true,
since we only create new app icons when necessary.
Rename it to 'appIcons'.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
The views (AllView and FrequentView) build a list of all applications
they contain. BaseView then diffs between what's currently added, and
what needs to be added, and removed.
This approach has a problem though: creating an AppIcon or a FolderIcon
connects to various signals, and we confuse the garbage collector.
When building the list of applications, instead of always creating new
icons, try to use already existing icons first.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1610
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1694
GWeather.Info.get_value_update() may indicate that the forecast is not
valid, or it may return a timestamp of 0 to indicate the information has
never been updated. In both of these cases, skip creating a widget for
it, as the information will not be accurate.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/835
If the clock is set to 12h, the AM/PM in the weather forecast times
should be clear from the context, because they are the immediately
following hours. This makes it less likely that the times will be
ellipsized (in which case the AM/PM wouldn't be shown anyway.)
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/835
While we support a reasonable list of layouts nowadays, we don't
include many variants like `fr+oss`. Instead of directly falling
back to the `us` layout, try stripping the variant first, as the
base layout is likely closer to the expectation than `us`.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1907
