Commit Graph

8173 Commits

Author SHA1 Message Date
Sebastian Keller
629b7394f7 dnd: Set dnd actor size instead of scaling it when reparenting
Previously the actor could end up using its natural size and then get
scaled down to its allocation before reparenting. This however could
affect the layout of the widget due to the larger size. To ensure the
widget looks the same after reparenting set the size to its original
size.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3717

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1680>
2021-02-16 01:07:23 +01:00
Marco Trevisan (Treviño)
7a2e629bd0 gdm: Fail and restart verification on conversation stopped for all services
Currently when the foreground service conversation stops we increase the
verification failed count and try to start it again, while if a
background service has been stopped we just ignore it.

This is causing a various number of issues, for example in the case of
the fingerprint authentication service, it is normally configured to die
after a timeout, and we end up never restarting it (while the UI still
keeps showing to the user the message about swipe/touch the device).

So, in such case let's just consider it a "soft" verification failure
that doesn't increase the failures count but will cause us to reset the
UI and try to restart the authentication (and so the affected service).

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
2021-02-15 16:58:50 +00:00
Marco Trevisan (Treviño)
ed1ace1d99 authPrompt: Bump the user verifier timeout when wiggling the message
Wiggle may make the error message to be visible for less time so provide
the auth prompt an API to increase the timeout to be used for showing a
message in some cases.

This could be reworked when we'll have a proper asyn wiggle function so
that we could just make the user verifier to "freeze", then await for
the wiggle transition to complete and eventually release the verifier.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
2021-02-15 16:58:50 +00:00
Marco Trevisan (Treviño)
75a1798e75 authPrompt: Wiggle error messages coming from the Fingerprint service
When error messages are coming from the fingerprint service they are actual
failures due to an user input in some device, in so in such case we
can highlight this by using a wiggle effect.

This mimics what has been done in gnome-control-center fingerprint panel
and part of [1].

[1] https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/56

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
2021-02-15 16:58:50 +00:00
Marco Trevisan (Treviño)
19c4dce322 authPrompt: Only wiggle the entry on failures coming from the querying service
Currently whenever an authentication failure happens we wiggle the
entry, however this may not be related to the service which failed.

For example if the fingerprint authentication failed for whatever reason,
there's no point to wiggle the text input as it's something unrelated to it.

So, only apply the wiggle effect to the entry in case the failure is
coming from the querying service.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
2021-02-15 16:58:50 +00:00
Marco Trevisan (Treviño)
526f0711f1 gdm: Expose the source serviceName for messages and verification failures
By giving to the AuthPrompt information regarding the source service
name (and so the ability to know whether it's a foreground service) can
give it the ability to behave differently.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
2021-02-15 16:58:50 +00:00
Marco Trevisan (Treviño)
6ccd289691 gdm: Count fingerprint authentication failures in fail counter
Fingerprint PAM module can have multiple failures during a runtime
and we rely on the pam module configuration for the maximum allowed
retries.

However, while that setting should be always followed, we should never
ignore the login-screen's allowed-failures setting that can provide
a lower value.

So, once we have a fingerprint failure let's count it to increase our
internal fail counter, and when we've reached the limit we can emit a
verification-failed signal to our clients.

As per this we need also to ignore any further 'info' messages that we
could receive from the fingerprint service, as it may be configured to
handle more retries than us and they might arrive before we have
cancelled the verification session.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
2021-02-15 16:58:50 +00:00
Marco Trevisan (Treviño)
1158e98913 gdm: Increase the verification failed counter once we've a failure
Decouple the verification failure count increase from
_verificationFailed as there are some cases in which we may want to
increase it without emitting a verification-failed signal.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
2021-02-15 16:58:50 +00:00
Marco Trevisan (Treviño)
53db4b99b8 gdm: Always show fingerprint error messages
When the login/lock screen is shown the error messages for background
services are always ignored.

However, in case the service is the fingerprint authentication method
we still want to be able to show error messages to inform the user
about what failed, and eventually that the max retries (that may be
different from the login screen configuration) has been reached.

This handles partially the design issue [1] related to the login/lock
screen fingerprint authentication.

Eventually we want to use pam extensions to use clearer and parse-able
messages, however in the case of the fingerprint service we can be sure
that the fprint PAM module will only send errors on auth failures.

[1] https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/56

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
2021-02-15 16:58:50 +00:00
Marco Trevisan (Treviño)
f7685dc224 ShellUserVerifier: Add method to check if the service name is fingerprint
We have multiple places where we check if we're handling a fingerprint
event, so let's add a common public function so that it can be used also
by the authPrompt.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
2021-02-15 16:58:50 +00:00
Carlos Garnacho
863ba76675 messageTray: Drop hack to keep track of X11
This is here to cater for lost events while the pointer wanders
into untracked shell UI (thus not part of the input region under
X11). Let mutter handle this situation instead.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1556>
2021-02-14 13:57:56 +00:00
Carlos Garnacho
2799760244 windowManager: Drop sync_pointer() after relayouts
We should trust the Clutter machinery here, as it has code to trigger
focus changes triggered by relayouts.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1556>
2021-02-14 13:57:56 +00:00
Carlos Garnacho
2445212e35 messageList: Drop sync_pointer() after relayouts
We should trust the Clutter machinery here, as it has code to trigger
focus changes triggered by relayouts.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1556>
2021-02-14 13:57:56 +00:00
Carlos Garnacho
cbde13fc65 overview: Avoid sync_pointer after pop_modal()
This is only necessary for the X11 backend (as grabs triggered by other
clients leave GNOME Shell oblivious of the actual pointer position), but
is now handled inside Mutter.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1556>
2021-02-14 13:57:56 +00:00
Carlos Garnacho
0141b66d23 grabHelper: Avoid sync_pointer after pop_modal()
This is only necessary for the X11 backend (as grabs triggered by other
clients leave GNOME Shell oblivious of the actual pointer position), but
is now handled inside Mutter.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1556>
2021-02-14 13:57:56 +00:00
Carlos Garnacho
f1437506ea dnd: Avoid sync_pointer after pop_modal()
This is only necessary for the X11 backend (as grabs triggered by other
clients leave GNOME Shell oblivious of the actual pointer position), but
is now handled inside Mutter.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1556>
2021-02-14 13:57:56 +00:00
Carlos Garnacho
28f73a175c windowManager: Do not set Wacom LED state through g-s-d
This piece of machinery is going away, in favor of the own kernel's
support.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1075>
2021-02-13 15:52:55 +01:00
Lucas Werkmeister
bbf1fc28ca lookingGlass: Let history trim input
Checking whether the item is empty is now the history’s job, per the
previous two commits. The history also trims the input for us.

The effect of this is that we call _history.addItem(), and thereby move
to the end of the history, even if the input is empty (or consists only
of whitespace); clearing the input field and pressing Enter becomes a
quick way to jump back to the end of the history. (The current history
item is not overwritten if the input is empty.)

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1653>
2021-02-13 08:58:20 +00:00
Lucas Werkmeister
df94055c58 runDialog: Let history trim input
Checking whether the item is empty is now the history’s job, per the
previous commit. The history also returns the trimmed input for us, so
we can avoid doing that work twice.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1653>
2021-02-13 08:58:20 +00:00
Lucas Werkmeister
d31f805817 history: Trim input and ignore if empty
This ports the runDialog changes of [1] to the underlying history
component, where they can benefit looking glass as well: the history is
now responsible for trimming the input and deciding that it shouldn’t be
stored if empty. (Note that _setPrevItem and _setNextItem already
skipped updating the history if the entry was empty.)

Since both users, runDialog and lookingGlass, also need the trimmed
input for other reasons – runDialog to avoid issues when interpreting
the command as a file path (if it can’t be executed as a command),
lookingGlass to decide whether a command should be run at all – have
addItem return the trimmed input. (runDialog and lookingGlass are not
yet changed to take advantage of this – that will be done in separate
commits.)

[1]: https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1442

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1653>
2021-02-13 08:58:20 +00:00
Lucas Werkmeister
30203f2694 history: Use strict equality checks
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1653>
2021-02-13 08:58:20 +00:00
Marco Trevisan (Treviño)
829a096ba1 gdm: Restart only the service that failed at verification-failure
When verification failed using a specific authentication service we're
currently restarting the whole user authentication system, which leads
to lots of unneeded operations (reinitializing a new user verifier proxy,
restarting all the gdm workers with the relative PAM modules and so on).
And this makes also debugging of login problems more complicated, given
we're cluttering the journal with repeated data.

However, at reauthentication failure GDM has already set up for us an
user verifier that we can use reuse to start only the service that had a
failure. So when possible, just start a new service instead of rebooting
the whole authorization process.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
2021-02-12 20:26:00 +00:00
Marco Trevisan (Treviño)
85ad1157df gdm: Pass source serviceName to verification failures
Depending on the service name we got the failure from we could react
differently, so let's pass the value to the verification failure
handler.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
2021-02-12 20:26:00 +00:00
Marco Trevisan (Treviño)
80a7a8ddb9 gdm: Ensure we cancel all the previously running services on auth retry
When retrying the authentication we should make sure that all the
previously initiated services are stopped in order to begin a new
authentication session with all the configured services.

Unfortunately at the current state we only dispose the currently used
user verifier, but we don't make it to stop all the relative gdm workers
and then they'll stay around potentially blocking any further usage of
them (as it happens with the fingerprint one, that has unique access to
the device).

So, cancel the currently running authentication before starting a new
one if we're explicitly retrying.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
2021-02-12 20:26:00 +00:00
Marco Trevisan (Treviño)
ca912f55cc gdm: Include the failed service name when in reporting errors
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
2021-02-12 20:26:00 +00:00
Marco Trevisan (Treviño)
36fba1a184 gdm: Do not fail the whole authentication if a background service failed
In case a background service such as the fingerprint authentication
fails to start we'd just mark the whole authentication process as
failed.

Currently this may happen by just putting a wrong password when an user
has some fingerprints enrolled, the fingerprint gdm authentication
worker may take some time to restart leading to a failure and this is
currently also making the password authentication to fail:

    JS ERROR: Failed to start gdm-fingerprint for u: Gio.DBusError:
        GDBus.Error:org.freedesktop.DBus.Error.Spawn.Failed:
            Could not create authentication helper process
        _promisify/proto[asyncFunc]/</<@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:435:45
        ### Promise created here: ###
        _startService@resource:///org/gnome/shell/gdm/util.js:470:42
        _beginVerification@resource:///org/gnome/shell/gdm/util.js:495:18
        _getUserVerifier@resource:///org/gnome/shell/gdm/util.js:405:14
        async*_openReauthenticationChannel@resource:///org/gnome/shell/gdm/util.js:378:22
        async*begin@resource:///org/gnome/shell/gdm/util.js:194:18
        _retry@resource:///org/gnome/shell/gdm/util.js:561:14
        _verificationFailed/signalId<@resource:///org/gnome/shell/gdm/util.js:584:30
        _emit@resource:///org/gnome/gjs/modules/core/_signals.js:133:47
        finishMessageQueue@resource:///org/gnome/shell/gdm/util.js:268:14
        _queueMessageTimeout@resource:///org/gnome/shell/gdm/util.js:273:18
        _queueMessageTimeout/this._messageQueueTimeoutId<@resource:///org/gnome/shell/gdm/util.js:288:65

Given that background services are ignored even for queries or any kind
of message, we should not fail the authentication request unless the
default service fails.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
2021-02-12 20:26:00 +00:00
Marco Trevisan (Treviño)
0ccb8e27d4 gdm: Disconnect user verifier signals on destruction and verification failed
When a verification session has failed we may want to wait for the user
to have completed all the waiting queries and to have read all the
incoming messages, however during such time an user verifier should
not be allowed to queue further messages to the UI, as we're about to
completely stop the identification or start a new one.

Unfortunately this is not true because we're still connected to the
identifier signals, and so we may still show messages.
This is particularly true when using the fingerprint PAM module as it
may restart the authentication while we're in the process of stopping
it.

So, keep track of all the signals we've connected to, and disconnect on
verification failed and during cancel/clear operations.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
2021-02-12 20:26:00 +00:00
Marco Trevisan (Treviño)
c936ca3ea0 gdm: Don't try answering query if the user verifier has been deleted
Answering a query may be delayed to the moment in which we've not any
more messages in the queue, however this case can also happen just after
we've cleared the UserVerifier and in such case we'd have nothing to
answer, but we currently throw an error:

    JS ERROR: Exception in callback for signal: no-more-messages:
      TypeError: this._userVerifier is null
    answerQuery/signalId<@resource:///org/gnome/shell/gdm/util.js:249:17
    _emit@resource:///org/gnome/gjs/modules/core/_signals.js:133:47
    finishMessageQueue@resource:///org/gnome/shell/gdm/util.js:266:14
    _clearMessageQueue@resource:///org/gnome/shell/gdm/util.js:301:14
    clear@resource:///org/gnome/shell/gdm/util.js:223:14
    cancel@resource:///org/gnome/shell/gdm/util.js:205:18
    reset@resource:///org/gnome/shell/gdm/authPrompt.js:482:32
    cancel@resource:///org/gnome/shell/gdm/authPrompt.js:569:14
    vfunc_key_press_event@resource:///org/gnome/shell/gdm/authPrompt.js:128

So handle this case more gracefully keeping track of the current
cancellable and checking whether it is still valid before trying to answer
a query or do a delayed action.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
2021-02-12 20:26:00 +00:00
Marco Trevisan (Treviño)
c8bb45b41c gdm: Limit verification cancellations to be conform to allowed-failures
As per previous commit the user can cancel an ongoing authentication via
Escape key and that will always send the user back to the clock view in
lockscreen or user-selection view in login prompt.

However, we can be a little more permissive and don't switch view to be
able to restart the authentication without further action.

To avoid this to be abused though, we consider the user verification
cancellation via escape key to be a "soft-failure", so once the
configured "allowed-failures" gsettings value has been reached, we'd
just act as before, ignoring any further request (until we don't get
back to the user auth view).

In this way we still make brute-force attacks harder to do, while still
giving the well-behaving user some ability to fix mistakes.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
2021-02-12 20:26:00 +00:00
Marco Trevisan (Treviño)
7e77881717 authPrompt: Handle Escape key to cancel ongoing verification
Escape key is supposed to cancel a verification, however if the user
already hit Enter to begin the authentication the Escape key won't work
until the verification completed.

This may be quite inconvenient when an user did a typo while writing and
wants to cancel the already started auth.

So, while authenticating (or in general while the entry is unsensitive)
give the key focus to the authpromt itself so that we can still get the
input events and cancel an user action.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
2021-02-12 20:26:00 +00:00
Marco Trevisan (Treviño)
3e96952fde authPrompt: Don't begin a new authentication session on lockscreen cancel event
When a cancel event in the user lockscreen happens we first emit a reset
signal and immediately a cancelled one.

This lead to start a new gdm worker for each enabled authentication
method and then immediately to stop it.
As per the previous commit, we don't have anymore dangling gdm workers
around, but still we should not even start a new one in such case.

So, when the user explicitly cancelled the authentication session, first
emit a cancelled event and only emit a reset event with a begin request
if we are outside the lockscreen.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
2021-02-12 20:26:00 +00:00
Marco Trevisan (Treviño)
b916df1110 gdm: Cancel user verification on UserVerifier destruction
When we cancel an user authentication via Escape key or cancel button on
AuthPrompt we reset the view and we emit a 'cancelled' signal that leads
to destroying the auth prompt and the user verifier.

However, the verifier may still have an operation in progress and its
completion may take some time (as in the case of gdm-fingerprint), but
we just leave the gdm worker running until its pam module completes
(potentially never) clearing and disposing its handle.

So, instead of just clearing the verify, actually cancel and clear it.
In case the user verifier is set, clearing the relevant data will happen
anyway as part of the cancel() call.

Ideally this would have been handled by gdm itself, but unfortunately we
can't fix it there because the verifier itself is a class generated by
gdbus-codegen, so we can't handle this automatically on disposal nor we
can automatically monitor when the caller proxy is stopped on our side.

Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3654
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
2021-02-12 20:26:00 +00:00
Florian Müllner
2beca14b8d windowPreview: Tie icon scale to overview state
Scaling the icons all the way from/to 0 is a relatively big transition,
which is fairly distracting when playing simultaneously for multiple
previews after reaching the WINDOW_PICKER state.

Instead, tie the scale to the overview state itself, so that the animations
runs in parallel.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1654>
2021-02-12 19:48:43 +00:00
Georges Basile Stavracas Neto
c0a4d90847 overviewControls: Limit Dash height to 15% of the overview's
Back when the Dash was vertical, the size of each item was calculated
solely based on the available height. After making the Dash horizontal,
this was swapped by the available width. However, when the height of the
Dash decreases, the current code results in never scaling them up ever
again.

Fix that by making ControlsManagerLayout explicitly pass the maximum Dash
sizes. Remove the 'notify::width' handler that served the same purpose.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3651

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1638>
2021-02-11 22:31:50 +00:00
Georges Basile Stavracas Neto
1b51ae150d searchController: General cleanup
Fix style issues, such as indentation and == → ===. Simplify
getTermsForSearchString() by removing one variable.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1667>
2021-02-11 21:14:36 +00:00
Georges Basile Stavracas Neto
c8f1dca3c7 Rename ViewSelector to SearchController
Rename ViewSelector to SearchController, since ViewSelector now effectively
only handles search. Rename the file correspondingly as well.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1667>
2021-02-11 21:14:36 +00:00
Georges Basile Stavracas Neto
27627bd40a viewSelector: Cleanup pages
Remove the dummy applications page that was introduced as a temporary
step. Replace the 'page-changed' and 'page-empty' signals with a 'search-active'
boolean property.

Remove ViewSelector.ViewsPage since it's now unused, and all the page handling
mechanism. At last, since we don't use any ShellStack features anymore, simply
make it a St.Widget with a ClutterBinLayout as the layout manager.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1667>
2021-02-11 21:14:36 +00:00
Jonas Dreßler
3510b88bdc screenshot: Remove shooter from sender in finally block
We do this in both the try{} and the catch{} block, so we might as well
put it into a finally{} block.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1658>
2021-02-11 18:51:40 +00:00
Jonas Dreßler
c1bfdd74d8 screenshot: Fix slow audiovisual feedback on when taking screenshot
Add a "screenshot-taken" signal from the screenshot service's internal C
implementation, and use that to trigger the camera flash visual effect
and the click sound, allowing them to run in parallel with the PNG
compression instead of waiting until the file is complete to start.

This significantly improves perceived latency on high res setups such as
4K, 5K, or dual 4K screens.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/512

Co-authored-by: Brion Vibber <bvibber@wikimedia.org>
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1658>
2021-02-11 18:51:40 +00:00
Jonas Dreßler
461c65c93b screenshot: Replace template strings with .format()
CI will complain when we add screenshot.js to the POTFILES in the next
commit because gettext doesn't like template strings, so make CI happy
and switch to .format() instead.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1658>
2021-02-11 18:51:40 +00:00
Brion Vibber
f9652aab82 Fix for screenshots when pictures path is unavailable
On my local jhbuild setup some local stuff is not set up and
there's no pictures folder. This fixes a regression where it
blew up instead of saving to the home dir in this situation.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1658>
2021-02-11 18:51:40 +00:00
Georges Basile Stavracas Neto
86cefd906b workspace: Disable overlay for inactive workspaces too
In addition to disabling the overlay when the state is not 1,
disable it also when not in the active workspace.

Make the Workspace class track the workspace's active state,
and resync the overlays when it changes.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1645>
2021-02-11 17:21:48 +00:00
Georges Basile Stavracas Neto
2e817d3fa8 workspace: Always leave overview when in app grid state
The behavior of workspaces is different depending on whether
the overview is in window picker state, or app grid state.

When in window picker state, clicking on adjacent workspaces
should only activate them, without hiding the overview; and
clicking on the active workspace hides the overview. When in
app grid state, clicking on a workspace must always hide the
overview.

Pass the overview adjustment to Workspace, and leave overview
if the overview state is bigger than WINDOW_PICKER.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1645>
2021-02-11 17:21:48 +00:00
Georges Basile Stavracas Neto
bf1fa3879f workspacesView: Interpolate against relative workspace boxes
The overview transition consists of getting the initial and final
states of the overview adjustment, derivating various other internal
states from them (such as the fit mode, opacities, translations, etc),
and finally interpolating the allocation boxes.

When interpolating between the fit mode, WorkspacesView uses the current
allocation box to derivate the SINGLE and ALL fit mode boxes. However,
that creates a curved path during overview transitions. What we really
want to do here is calculate the fit mode box relative to the corresponding
overview state. For example:

 +----------------+----------+------------------------+
 | Overview State | Fit Mode | Workspaces geometry    |
 +----------------+----------+------------------------+
 | HIDDEN         | SINGLE   | Cover entire screen    |
 | WINDOW PICKER  | SINGLE   | Between minimap & Dash |
 | APP GRID       | ALL      | 15% screen height      |
 +----------------+----------+------------------------+

Using the table above as the reference, when the overview transitions
between WINDOW PICKER and APP GRID, we must interpolate between
(SINGLE fit mode @ between minimap & Dash) and (ALL fit mode @ 15% screen
height). That way, we always interpolate the final boxes, which corrects
the odd path that workspaces follow during this transition.

Make the WorkspacesView of the primary monitor use these cached boxes
when the overview is in the middle of a transition, and the fit modes of
the initial and final state differ, to calculate the workspaces positions.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
9c6d8e2aad overviewControls: Cache workspaces boxes
Next commit will need to access the allocated workspaces boxes, so
cache them at allocation time.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
ca066a4ba6 workspacesView: Use calculated workspace state for progress
It works just like before, except that this has the nice side effect
of not changing the workspace mode when leaving the overview from
the app grid state.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
87645652e5 overviewControls: Make AppDisplay rise from the bottom
It makes more sense in a spatial overview that the app grid
comes and goes to somewhere in the screen, instead of fading
in and out into the void.

Make the app grid rise from the bottom of the screen.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
a9f11b1f5a workspacesView/workspacesDisplay: Remove parent opacity hack
Now, we set WorkspacesDisplay's opacity directly, so there's no
need to have this parent → child glue code anymore. Remove it.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
c09c070b15 overviewControls: Incorporate ActivitiesContainer
Move AppDisplay, WorkspacesDisplay, and ThumbnailsBox from ViewSelector to
ControlsManager. This allows to always allocate the correct size for AppDisplay,
and will enable for a plethora of further improvements. The end goal is to
completely remove ViewSelector, and let ControlsManager handle the layout of
everything that's visible in the overview.

For now, replace the apps page with a dummy actor in ViewSelector.

Adjust various callers around the codebase to not access the ViewSelector
directly from the overview anymore.

Bind the opacity of the primary workspace to WorkspaceDisplay's opacity. This
allows removing the parent opacity hack in place, which will be done by the
next commit.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
83127bf805 overviewControls: Use specialized class for Overview adjustment
It'll be useful for the next commits to have a handy 'getState' method
that calculates the progress of any particular transition.

Move the St.Adjustment to a specialized subclass.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
4cf5898d85 viewSelector: Remove pinch gestures
It'll be replaced by a 3 finger gesture that sticks to fingers
and progressively transitions between states.

Remove both pinch and touchpad pinch gestures from ViewSelector.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
cbe0180f47 viewSelector: Drop edge drag gesture
It doesn't use any ViewSelector's API anymore, and its functionality will be taken
over by the 3 finger gesture.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
80d258b20f viewSelector: Move 'toggle-applications-view' to ControlsManager
Move the shortcut handling into ControlsManager, and reimplement
the callback in such a way that it behaves correctly with the
current overview machinery.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
b32f414919 viewSelector: Remove showApps()
Now that Overview is able to ease into any state, be it window
picker or app grid, we can move this ViewSelector method to
Overview itself, which is its rightful place to live.

Remove ViewSelector.showApps(), and make all callers call
Main.overview.show(ControlsState.APP_GRID). Also make sure the
show apps button is correctly toggled.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
8089d7cbf7 overivew: Propagate target state when animating to overview
Next commits will requires ControlsManager to animate to different
states, depending on how Overview is called. Add a new 'state'
parameter to ControlsManager's, and OverviewActor's animateToOverview,
and Overview.show().

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
bce67a27cc viewSelector: Move 'toggle-overview' shortcut to overview
It is handled there already, there's no reason for it to continue
to be in ViewSelector.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
22f4a6b7f6 workspace, workspacesView: Cleanup animation methods
Remove Workspace.zoomTo/FromOverview(), they're unused now. Rename
everything up to ControlsManager to prepareToEnter/LeaveOverview(),
since these classes don't run the animation anymore.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
d221215ab6 workspacesView: Derive workspace mode from overview state
WorkspacesView uses the floating layout when the overview is in window
picker mode, and the session layout when the overview is in app grid
mode. Up until now, the fit mode adjustment was used to derive the
workspace mode, but it is incomplete as it doesn't have the full range
of workspace states.

Make ViewSelector cascade the overview adjustment to WorkspacesDisplay,
and use the overview adjustment itself to derive the workspace mode.

Extra workspaces don't have to account for the fit mode, and thus are
basically a clamp(state, 0, 1) of the overview state. However, don't
call animateTo/FromOverview() anymore, since they ease the workspace
mode adjustment.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Florian Müllner
741d6abb97 workspacesView: Add primary view to workspaces display
Boy, does this commit feel good.

While the workspaces view on the primary monitor *appears* as part of
the overall overview hierarchy, this hasn't actually been the case
until now. We synchronized its size and (stage) position to match
the workspaces display, but actually kept in a separate layer for
the transitions to and from the overview.

But now that the new layout manager slides out completely during the
overview transitions, the workspaces display starts out covering the
entire work area, which is exactly what we need for the transition.

So finally stop faking it, and actually make the primary workspaces
view a child of the workspaces display.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
1ad1db406e overview: Don't fade OverviewActor
Now that the workspace display is properly allocated for each frame,
we don't want to fade the entire overview anymore.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
b6337a7bf1 overviewControls: Ease main adjustment when animating to/from overview
Instead of delegating it to ViewSelector, make the transition to and from
overview ease the main state adjustment.

This commit temporarily breaks these animations, but on the other hand
introduces an important feature: ViewSelector is always allocated to the
actual size. This will finally allow for adding WorkspacesView as a child
of WorkspacesDisplay, and finally remove the actual geometry hack, which
is what next commit is about.

This commit also effectively reverts b64103efc.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
0a8aeebd30 overview: Reorganize animateTo/FromOverview()
Instead of directly accessing ViewSelector and calling these methods
there, cascade the calls to OverviewActor, ControlsManager, and finally
ViewSelector. Also move the opacity transition to OverviewActor.

This commit has no functional change.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
e6e5a93dec viewSelector: Use state adjustment for apps page
Currently, ActivitiesContainer reacts to showAppsButton and
transitions between app grid and window picking states on
its own. In the future, we want full control over this.

ControlsManager already has a state adjustment that represents
all possible overview states. Propagate this adjustment up to
ActivitiesContainer, and use it to drive the transition.

This requires moving the callback to the showAppsButton to
ControlsManager, since now it control the state adjustment
itself, not ActivitiesContainer's adjustment.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
3887253823 overviewControls: Use adjustment to control layout
Right now, the adjustment is fixed at ControlsState.WINDOW_PICKER,
but soon it will be propagated to ViewSelector to control the
transitions.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
55510e9cdf overviewControls/controlsManager: Use a custom layout manager
In the future, we want to tightly control the state of the
layout throught gestures, which requires hooking everything
together with adjustments. This is the first step in this
direction.

Add a new custom layout manager for ControlsManager that
allocates the search entry, the view selector, and the Dash,
vertically.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Georges Basile Stavracas Neto
301686ee5f overview: Move search entry to ControlsManager
Next commit will tie all these widgets up with a single
layout manager, and we need to control the search entry
position.

Move it to OverviewControls.ControlsManager.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
2021-02-11 15:50:31 +00:00
Pascal Nowack
d02612e790 ui/windowManager: Fix horizontal scrolling when smooth events are used
Currently, gnome-shell uses the wrong scrolling direction for
horizontal scrolling events.
When dx < 0 for a smooth scroll event, then the scrolling direction is
supposed to be Clutter.ScrollDirection.LEFT, instead of
Clutter.ScrollDirection.RIGHT, as dx is smaller than 0.

Fix this issue by swapping the values LEFT and RIGHT.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1665>
2021-02-11 15:43:19 +01:00
Florian Müllner
21faae480e polkitAgent: Ensure cleanup if dialog wasn't shown
It is possible for an initiated session to complete without
a request if polkit can authenticate the action without user
input. We fail to clean up after ourselves in that case, as
the cleanup is done after the dialog is closed.

The dialog can still be shown when the code that hides existing
dialogs while the screen is locked shows it on unlock. But as
the session was closed, the dialog is now defunct and cannot
be dismissed by the user.

Fix this by running the cleanup on close() when the dialog
wasn't shown.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3701

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1662>
2021-02-11 13:48:54 +01:00
Florian Müllner
3a9acb9602 dash: Re-fittsify
Now that the dash is no longer attached to a screen edge, it lost
its "infinite width" (Fitts' law). Restore it by moving the visible
bar into a separate layer underneath the actual icons, extend the
icons to the bottom edge, and replace the margin around the dash
with padding inside the icons.

https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/89

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1660>
2021-02-10 15:46:00 +00:00
Florian Müllner
5c31ef6ae2 dash: Reindent some more code
Again we're about to touch it.

https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/89

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1660>
2021-02-10 15:46:00 +00:00
Florian Müllner
73b94c3901 overviewControls: Remove DashFader
By now there is so little left of the old sliding controls that the
split from the actual dash makes little sense.

https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/89

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1660>
2021-02-10 15:46:00 +00:00
Florian Müllner
9aa25eaa0b dash: Consider additions for separator visibility
The children variable holds the icons that were originally in
the dash. For the separator visibility, we should consider the
icons that are in the dash after the update, so we must consider
additions as well as removals.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1659>
2021-02-10 09:09:34 +00:00
Abderrahim Kitouni
9aae1df7a6 workspacesView: Fix off-by-one error
This is basically 9f0e7632a6 ported over ed1170906b which was dropped this
fix when copying things around.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1655>
2021-02-09 09:40:29 +00:00
Marco Trevisan (Treviño)
a19e6573e1 loginDialog: Fill UserListItem layout to show the timed login indicator
When the timed indicator is shown the UserListItem layout should fill
so that the timed indicator can expand to use the whole item space.

So, always use the default value for x-align that will make it to fill
the available space without causing any regression when the timed
indicator is hidden.

Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3675
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1644>
2021-02-09 06:08:55 +00:00
Alexander Mikhaylenko
2b9cf73309 workspacesView: Enable long swipes
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1647>
2021-02-08 22:20:26 +00:00
Alexander Mikhaylenko
16f74ebc57 swipeTracker: Add allowLongSwipes property
Since we now have the ability to support swiping through multiple pages,
expose it as a property.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1647>
2021-02-08 22:20:26 +00:00
Alexander Mikhaylenko
10cafc55c1 swipeTracker: Rework end point calculation
Previously we used a bunch of heuristics for this. We checked if velocity
was directed towards the nearest snap point and its value was larger than
a threshold. If it is, we completed the swipe, otherwise we cancelled it.

This was good enough at the time, because this code was originally written
for back/forward swipe. Since then, the swipe tracker was extended to
handle arbitrary snap points and not just 0 and 1, or -1 and 0, depending
on text direction. After that it was iterated on, but never significantly
redone.

This worked well enough, but had two problems:

1. In some cases, notably overview, it may be wanted to be able to swipe
   through multiple pages at once. This wasn't really possible because we
   always picked the adjacent snap point.

2. Since we can't do that well, we want to restrict swipes to one page at a
   time. It was done in a rather hacky way by clamping the position into
   [-1, 1] range from the place where we started the swipe. This works
   if we start the swipe from idle position, but if an animation was
   already going, the range would be clamped to arbitrary values, and very
   likely containing only one snap point, which we already swiped past at
   this point. In this case, finishing the swipe would cancel it regardless
   of velocity. This means that if one tries to quickly move through
   carousel pages via swiping, half of the swipes will be inexplicably
   cancelled.

We'll use the deceleration formula from
https://medium.com/@esskeetit/how-uiscrollview-works-e418adc47060#10ce
to calculate then projection point, then pick the nearest snap point and
calculate the duration as we did before. It works well enough for short
distances, but has two problems:

1. It caps the maximum distance at a pretty low value - about 5 pages in my
testing.

2. With how we pick the nearest snap point, it's too easy to accidentally
cancel the swipe,

To combat the first problem, we can modify the curve: only use linear
function at small distances, and smoothly transition it to a parabola
further.

For the second problem we can add two special cases: first, if the swipe
ended up between the initial snap point and the next one, we always prefer
the latter. Second, a good old velocity threshold for cancelling.

We'll also use a slightly smaller deceleration value for touchpad: 0.997
instead of 0.998.

Now that we can pick any snap point, the [-1, 1] clamping doesn't make
sense anymore, so instead let's replace it with a more flexible
mechanism: if we're near a snap point, pick its adjacent snap points.
Otherwise, take the two nearest snap points, and take their adjacent
snap points. This way we have 3 snap points to choose from when
starting a swipe from an idle position, and 4 if we start during an
ongoing transition.

This way, if we've just swiped from snap point n to n+1, the transition
will pick snap points n-1, n, n+1, n+2 and if we swipe again, we will
likely land on n+2. During that transition, if we swipe again, it will
likely have already passed the snap point n+1, so this time the available
snap points will be n, n+1, n+2, n+3, so we can swipe again and it will
still complete, and so on.

This will make it easy to allow multi-page swipes as well, by just
removing the clamping.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1647>
2021-02-08 22:20:26 +00:00
Alexander Mikhaylenko
cf87ab04aa swipeTracker: Calculate velocity using scroll history
In some cases we may get anevent with very low delta at the end of the
swipe. While we can't completely ignore them, we can smooth them using a
scroll history, similarly to what GTK kinetic scrolling does: keep track
of the last 150ms of events, and sum their deltas when calculating the
velocity.

The logic is based on what GTK does in GtkGestureSwipe and
GtkEventControllerScroll.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1647>
2021-02-08 22:20:26 +00:00
Razze
aa392d45c9 fingerprint: Show different strings depending on type
Fprintd knows if the fingerprint reader is of the swipe or press type. We now show different labels depending on that.

Closes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2011

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1572>
2021-02-08 19:19:14 +00:00
Razze
824cdc9177 fingerprint: Use makeProxyWrapper for fprintManager
The reason this wasn't using the Gio.DBus.makeProxyWrapper() convenience API is that it passes custom flags to the proxy, and that wasn't supported by the wrapper at the time.

As this is now possible, this commit migrates us to the new API.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1572>
2021-02-08 19:19:14 +00:00
Lucas Werkmeister
6ac32f1fc0 runDialog: Trim input before processing
This way, whitespace-only (nonempty) input gets the same treatment of
not being added to the history (see previous commit), which seems nice.

Part of https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3183.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1442>
2021-02-08 08:14:46 +00:00
Lucas Werkmeister
cb26a636e8 runDialog: Don’t add empty input to history
If the input is empty, there’s no point in adding it to the history –
it’ll just be mildly annoying when the user has to skip past it next
time they consult the history.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3183.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1442>
2021-02-08 08:14:46 +00:00
Lucas Werkmeister
7bea63ae4b runDialog: Don’t treat empty input specially
Let empty input result in an error, just like other invalid commands
(bad syntax, nonempty whitespace, etc.). GLib already has an error
message “Text was empty (or contained only whitespace)” which it shows
for whitespace-only input, so letting that message apply also to empty
input makes sense.

This requires some tweaks further down the file to avoid interpreting
empty input as an empty path (relative to the home directory) and then
opening the home directory.

Part of https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3183.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1442>
2021-02-08 08:14:46 +00:00
Bastien Nocera
512016dcb5 main: Show welcome dialogue on first start
This hooks the recently added welcome dialogue to be shown the first
time a new session is started, and disabled after that.

Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3632
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1619>
2021-02-05 13:41:26 +00:00
Bastien Nocera
b0a48fad57 util: Add a GNOME version comparison function
Add a function that can compare GNOME versions, including the new naming
scheme for GNOME 40 and later.

Used in https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3632

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1619>
2021-02-05 13:41:26 +00:00
Bastien Nocera
af4e54bfc9 welcomeDialog: Add “welcome” dialog
As designed at:
https://gitlab.gnome.org/Teams/Design/os-mockups/-/blob/master/greeter/welcome-dialog.png

Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3632
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1619>
2021-02-05 13:41:26 +00:00
Florian Müllner
29e2b15236 data: Rename custom close icon
Resource icons are added to the fallback icon theme, so they won't
get used if a matching icon is found in the configured theme.

That includes fallback names, so Adwaita's "window-close-symbolic"
takes precedence over "window-close-24-symbolic" in hicolor.

Fix this by using a custom name for a custom icon.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1640>
2021-02-05 01:01:09 +01:00
Sebastian Keller
c61e1e5c2c mpris: Hide unused elements to leave more space for the title
The Message class this is derived from unconditionally adds a close
button with 0 opacity that only gets shown on hover for messages that
can actually be closed. The MPRIS MediaMessage however can never be
closed and having a close button can cause the title to be cut short
unexpectedly.

Similarly the secondary text which other notifications use to display
the notification time is always left empty here as well.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3664

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1632>
2021-02-04 22:42:08 +00:00
Marco Trevisan (Treviño)
e641547ddf appDisplay: Do not bind popdown call to grabHelper onUngrab
grabHelper is passing a boolean argument to onUngrab() callback function
and since commit 1acbdcc9b3 we'd end up adding it to to the callback list or
we'd try to invoke it:

 (gnome-shell:3490851): Gjs-CRITICAL **: 17:19:20.460: JS ERROR:
  TypeError: func is not a function
  onComplete/<@/media/M2/GNOME/gnome-shell/js/ui/appDisplay.js:2407:56
  onComplete@/media/M2/GNOME/gnome-shell/js/ui/appDisplay.js:2407:40
  _makeEaseCallback/<@/media/M2/GNOME/gnome-shell/js/ui/environment.js:85:13
  _easeActor/<@/media/M2/GNOME/gnome-shell/js/ui/environment.js:170:64

Use an arrow function so that we can control the parameters we pass
to popdown.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1635>
2021-02-04 21:55:34 +01:00
Razze
ed628b90d7 accessibility/keyboard: Align the panelMenu button style
This get's rid of the single-indicator introduced in one of the latest
commits. This was causing the accessibility pill in the top panel
 to have different padding from the keyboard layout pill.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1615>
2021-02-04 20:08:29 +00:00
Florian Müllner
7aa36ad239 windowManager: Allow switching workspaces with super-scroll
So far, we couldn't allow workspace scrolling outside the overview
because scroll events were always sent to clients. However mutter
was changed recently to pass on scroll events when the mouse button
modifier (usually super) is pressed, which allows us to enable the
same workspace scrolling as in the overview now.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1612>
2021-02-04 20:04:15 +00:00
Florian Müllner
ac8246050d swipeTracker: Optionally require modifiers for scrolling
The design now calls for super-scroll for workspace switching
in the session, however it is currently only possible for
SwipeTracker to either handle scroll events or not.

In order to support the new use case, add a new :scroll-modifiers
property that allows specifying modifiers for which scroll events
are handled.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1612>
2021-02-04 20:04:15 +00:00
Florian Müllner
26a39bdf78 workspacesView: Move workspace scroll code to windowManager
This will allow sharing the code for the new super-scroll functionality.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1612>
2021-02-04 20:04:15 +00:00
Sebastian Keller
96d66def8c dnd: Update actor position after scaling even when animations are off
The code to update the actor position based on the cursor and current
scale was run in a 'new-frame' handler. This is working fine when
animations are enabled, but when they are turned off this does not work.
This is because the 'new-frame' signal is emitted before the changes for
that frame are applied. So with animations off the position was only
ever updated with the starting values. As a result the shrunk actor was
not being dragged by the position where it was clicked, but by where it
was clicked in the original size, which is likely not even on the shrunk
actor.

This change now also updates the position in the onComplete handler
which gets run with the final scale, even if the duration is 0.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/1699

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1627>
2021-02-04 16:39:55 +00:00
Georges Basile Stavracas Neto
1adcbaab46 workspacesView: Derive workspace state from fit mode
Derive the workspace state WorkspacesView's workspaces from the fit mode.
Extra workspaces still run the zoom animations as before.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
2021-02-03 20:30:30 +00:00
Georges Basile Stavracas Neto
176ea3b1ef workspace: Split preparation steps from zoomFromOverview
Next commit will bind the workspace state adjustment to the snap
adjustment in WorkspacesView, and we'll need the preparation
steps but not the easing of the state adjustment.

Split preparation steps from zoomFromOverview() into a new method
prepareToLeaveOverview().

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
2021-02-03 20:30:30 +00:00
Georges Basile Stavracas Neto
4cf5b4a6d8 workspacesView: Scale inactive workspaces
As per the latest mockups, then horizontally snapping, the active
workspace should be highlighted. Because WorkspacesView clips to
allocation, we cannot simply scale up the active one. Instead,
scale down the inactive ones.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
2021-02-03 20:30:30 +00:00
Georges Basile Stavracas Neto
b64103efca workspacesView/workspacesDisplay: Don't sync geometry when animating
Synchronizing the actual geometry while animating from / to the overview can
break the animation. Let's prevent that. This code will go away soon anyway,
but to not lose bisectability, it's better not to leave it misbehaving until
then.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
2021-02-03 20:30:30 +00:00
Georges Basile Stavracas Neto
ed1170906b workspacesView: Center active workspace in allocation
When vertically snapping, WorkspacesView currently allocates workspaces
side-by-side, then applies an extra step of translation to center to
the active workspace. This extra step, however, gets in our way because
now we need tighter control of the workspaces positions in allocation,
in order to properly interpolate them.

Move the translation of workspaces to the allocation code itself, and
remove the extra translation step.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
2021-02-03 20:30:30 +00:00
Georges Basile Stavracas Neto
1359b272a4 viewSelector: Tie workspace fit mode to adjustment
Tie the fit mode adjustment of WorkspacesDisplay to the
state adjustment of AppPagesContainer, and transition to
the ALL fit mode when the app grid is visible.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
2021-02-03 20:30:30 +00:00
Georges Basile Stavracas Neto
26c5434222 workspacesView: Use side-by-side layout
Currently, WorkspacesView positions each workspace on a
per-page layout, each page with the allocated width and
height of WorkspaceView. This layout doesn't work well
with horizontal workspaces.

Layout workspaces side by side, instead of per page. The
layout is influenced by a "fit mode", which reflects the
different behaviors exposed in the mockup. This fit mode
represents whether a single or all workspaces will fit
available geometry.

The single fit mode is always used for now. Next commits
will make it switch to the all fit mode when in the app
grid state.

The translation_{x,y} also needed to reflect the switch to
a side-by-side layout, and use the geometry of the workspaces
to determine the offset. Notice that, when the fit mode is ALL,
there's no translation applied.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
2021-02-03 20:30:30 +00:00
Florian Müllner
3abfc25858 workspacesView: Always use ZOOM transition
Workspaces are now always shown, so the code path to fade windows
instead of zooming out is dead now; remove it.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
2021-02-03 20:30:30 +00:00
Florian Müllner
252f2f5144 cleanup: Define GObject accessors in camelCase
gjs is smart enough to match a propertyName getter/setter to the
corresponding property-name GObject property, so use that and get
rid of the eslint camelcase rule exceptions.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1611>
2021-02-03 20:19:29 +01:00
Florian Müllner
0f1b566918 js: Use gjs-defined GObject accessors where possible
Nowadays gjs allows to omit get/set accessors for read-write properties,
and will define reasonable defaults in that case. In many cases we don't
need anything more than the default handling, let gjs handle those props.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1611>
2021-02-03 20:19:29 +01:00
Florian Müllner
a41e294e21 workspaceThumbnails: Remove obsolete property
Since commit f55ff01239, the property has been replaced by
an adjustment.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1611>
2021-02-03 20:19:29 +01:00
Florian Müllner
0064412359 appDisplay: Remove obsolete property
Since commit f09fbb19c, all app grids use pagination and the old
property is meaningless.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1611>
2021-02-03 20:19:29 +01:00
Florian Müllner
3ff71ac40e iconGrid: Use correct default values in pspecs
The defaults are set in the code right now, but this is about to change.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1611>
2021-02-03 20:19:29 +01:00
Florian Müllner
a9cbbd8017 pageIndicators: Remove animated indicators
Nothing uses them anymore, so clean out the code.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1629>
2021-02-03 09:55:29 +01:00
Georges Basile Stavracas Neto
5c7436be3e appDisplay: Never use animated indicators
The app grid itself now is horizontal, and is displayed beneath
workspaces, above the dash. This makes the indicator animations
out of place, as they're not coming from the edge anymore.

Use PageIndicators for both FolderView and AppDisplay.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1629>
2021-02-03 09:55:14 +01:00
Sebastian Keller
454394a267 workspace: Handle window-added and removed signal after window tracker
The new window preview overlay requires getting the app icon for a
window from the window tracker when it gets initialized. The window
tracker listens for the same 'window-added' signal on the MetaWorkspace
that the gnome-shell Workspace listens for to add the window preview.

The window tracker however reconnects all its signal handlers whenever
the number of workspaces changes, which means that its signal handlers
get called after the ones in Workspace ones. So by the time the
'window-added' handler in Workspace is called, the window tracker does
not have an app associated with the window.

To fix this ensure that all window related signal handlers in Workspace
are run after the ones in the window tracker.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3656

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1625>
2021-02-02 23:11:06 +01:00
Alexander Mikhaylenko
9ce666ac13 workspaceAnimation: Move background to WorkspaceGroup
Make each wallpaper have a wallpaper and clip it. Add a separate background
to MonitorGroup and add spacing between each workspace

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3635,
      https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/945,
      https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/948

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Alexander Mikhaylenko
ae4dab761e workspaceAnimation: Disable unredirection during the gesture
Make sure fullscreen apps can't block the animation.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Alexander Mikhaylenko
bca654851c workspaceAnimation: Support multiple screens
Currently, there's one animation for the whole canvas. While it looks fine
with just one screen, it causes windows to move between screens when
switching workspaces. Instead, have a separate animation on each screen,
and sync their progress so that at any given time the progress "fraction"
is the same between all screens. Clip all animations to their screens so
that the windows don't leak to other screens.

If a window is placed between every screen, can end up in multiple
animations, in that case each part is still animated separately.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1213

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Alexander Mikhaylenko
8eba759932 workspaceAnimation: Group sticky windows and moving window
Since the transitions consists of window clones now, all the clones appear
above sticky windows. Clone sticky windows as well, and treat them same as
moving window instead.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Alexander Mikhaylenko
ee5564015a workspaceAnimation: Use a workspace strip
Currently, the workspace swipe transition only has one workspace in each
direction. This works until you try to do multiple swipes in quick
succession. The second swipe would continue the existing transition, which
only has 2 or 3 workspaces in it, and will hit a wall.

To prevent this, take all workspaces and arrange them into a column or row,
depending on the layout, and use that as a transition.

For the transition that happens when focusing a window on another workspace
(for example, via Alt+Tab), still use only two workspaces instead of all of
them.

Since we don't support layouts other than single rows/columns anymore,
diagonal transitions aren't supported anymore, and will be shown as
horizontal or vertical instead.

Since nw alt-tab and gesture transitions are different, don't allow to do
both at once, that is, disable swipe tracker when a programmatic transition
is going. This will also conveniently cancel a gesture transition if a
programmatic one is initiated while a gesture is in progress.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2612

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Alexander Mikhaylenko
9cf300c972 workspaceAnimation: Use window clones
Instead of reparenting windows, clone them. This will allow to properly
support multi-monitor setups in subsequent commits.

Block window mapping animation while the animation is running to prevent
new windows appearing during the animation from being visible at the same
time as their clones.

Fixes https://gitlab.gnome.org/GNOME/mutter/issues/929

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Alexander Mikhaylenko
0f99d46f87 workspaceAnimation: Add a background
In future we will need to use window clones to better support multiple
monitors. To avoid having to hide every window, show wallpapers behind
the workspace transition: one per monitor.

Put the wallpaper into a separate class right away, later it will be
useful to make the animation per-monitor.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Alexander Mikhaylenko
2f78d32921 workspaceAnimation: Add to uiGroup insead of window_group
This will allow to hide window group completely in the following commits.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Alexander Mikhaylenko
e32ec73315 workspaceAnimation: Extract WorkspaceGroup
Simplify the code a bit. The workspace group is relatively self-contained,
so split it from the general animation. Reimplement _syncStacking().

This will help a lot later, with workspace strip and multi-monitor support.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Alexander Mikhaylenko
269c5ca957 workspaceAnimation: Stop depending on shellwm
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Alexander Mikhaylenko
bebd612a8f workspaceAnimation: Split from WindowManager
It's already too complex, and will get more complex in future, split it
out. Update the code style.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Florian Müllner
42c2bf709e windowPreview: Overhaul chrome style
- increase close button size
 - use custom close icon that's better suited
   for the non-default 24pxp size
 - use translucent light gray for both close button
   and window caption

https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/81

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1605>
2021-02-02 10:06:23 +01:00
Florian Müllner
30f27412c2 windowPreviews: Replace border with scale effect
We currently use a thick border to indicate the hovered/focused preview. It
works well for that purpose, but is a bit in the face. Slightly scaling up
the preview still provides a clear indication, but in a more subtle and
elegant way.

https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/81

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1605>
2021-02-01 21:06:13 +01:00
Florian Müllner
27a427421e workspace: Add some padding around window previews
Commit 059ea64 removed the workspace padding after moving the
background into the workspace. However some whitespace around
window previews is still a good idea, and will be necessary
soon as we are about to indicate focus by slightly scaling up
the active preview, and don't want previews to be clipped by
the workspace in that case.

https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/81

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1605>
2021-02-01 21:06:13 +01:00
Florian Müllner
2bd91e738e workspace: Adjust spacing
Icons are always visible, so in order to not have overlays overlap
with other previews, we need to consider the sum of top- and border
oversizes rather than the maximum.

https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/81

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1605>
2021-02-01 21:06:13 +01:00
Florian Müllner
56c118de87 windowPreview: Keep borderCenter always visible
We need it to position the icon now, which isn't hidden with the
border.

https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/81

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1605>
2021-02-01 21:06:13 +01:00
Florian Müllner
efa3585bcc windowPreview: Add (back) application icons
The overview is less visually-busy nowadays, so add back application
icons to make identifying window previews easier.

Fun fact: Removing the icons was part of my very first gnome-shell
contribution!

https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/81

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1605>
2021-02-01 21:06:13 +01:00
Florian Müllner
5e10bed458 windowPreview: Allow titles to overlap other previews
We are about to add additional chrome, but still want to use
as much space as possible for the previews. Allowing titles
to overlap other previews should help keeping the additional
whitespace requirement low.

https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/81

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1605>
2021-02-01 21:06:13 +01:00
Florian Müllner
bc6849c7a2 windowPreview: Track overlay state separately
We currently express the state as a combination of border visibility
and the eventual transition state. That's tedious, in particular if
we want to use the state outside the show()/hide() methods.

Just track the requested visibility in a separate property.

https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/81

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1605>
2021-02-01 21:06:13 +01:00
Florian Müllner
de299f0a90 workspaceThumbnails: Center thumbnails in workspace navigator
We always request a natural width based on the maximum thumbnail scale,
but may very well use a smaller scale when allocating. This currently
results in thumbnails being off center, fix this by distributing any
extra space evenly before allocating thumbnails.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1620>
2021-02-01 16:34:37 +01:00
Guilherme Silva
779e66ae88 notificationDaemon: Fix icon-choosing logic
'image-data' (or 'image-path') should take precedence over 'app-icon',
even when both are sent by the application (e.g. Google Chrome).

Fixes #3616.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1616>
2021-02-01 13:58:20 +00:00
Jonas Dreßler
6ae49092c1 workspace: Use Util.lerp() instead of own _interpolate()
Use the utility function we newly introduced instead of having our own
private _interpolate() in workspace.js.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
2021-02-01 13:12:43 +00:00
Jonas Dreßler
959639bdc9 windowPreview: Cache the boundingBox of the layout manager
Accessing GObject properties from JS has proven to be quite slow because
of the JS->C->JS roundtrip involved. With the WindowPreview this
actually has an impact since we're accessing those properties very often
while creating new layouts.

So cache the boundingBox and the windowCenter properties of the
WindowPreview using a this._cachedBoundingBox JS object. This might
speed up opening the overview with lots of open windows significantly.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
2021-02-01 13:12:43 +00:00
Jonas Dreßler
a4bf44734d workspace: Don't store strategy on layout object
We're making the layout object fully owned by the layout strategy, so
store the current strategy somewhere else, that is as a private property
of the class.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
2021-02-01 13:12:43 +00:00
Jonas Dreßler
39e844ac0c workspace: Refactor layout scale and space calculation
Make computeScaleAndSpace() return an array including scale and space so
we no longer have to access the layout object from outside.

With this we also no longer need to set layout.space, since only the
scale property is needed in computeWindowSlots().

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
2021-02-01 13:12:43 +00:00
Jonas Dreßler
8d9a92fe98 workspace: Make computeLayout() return a layout object
Start cleaning up the whole mess around the layout object a bit and
return a new object in the LayoutStrategies computeLayout()
implementation. This object is supposed to be opaque to the API user and
will only be passed to the layout strategy.

For now, keep setting a few things on that object from outside, we'll
clean that up later.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
2021-02-01 13:12:43 +00:00
Jonas Dreßler
ac7dc62da6 workspace: Move more things to LayoutStrategy subclass
Only keep computeLayout, computeWindowSlots, computeScaleAndSpace and
the contructor in the superclass, the rest is actually layout specific
and won't apply anymore when we introduce the new vertical layout
strategy.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
2021-02-01 13:12:43 +00:00
Jonas Dreßler
c635ff490a workspace: Pass params object to LayoutStrategy
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
2021-02-01 13:12:43 +00:00
Florian Müllner
add6dfe2e4 status/dwellClick: Remove menu arrow
This was missed in commit db9a008.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1618>
2021-02-01 11:40:03 +00:00
Abderrahim Kitouni
698e67c486 workspacesView: Fix scroll direction in RTL locales
Scrolling up or down (using the mouse wheel) should scroll to right
or left respectively (rather than the other way around).

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1608>
2021-01-30 11:45:22 +00:00
Florian Müllner
151a104f9a dash: Only show separator when there are running apps
The separator is only really needed to distinguish favorite apps
from running apps, the show-apps button is distinct enough already.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1610>
2021-01-30 09:44:11 +00:00
Florian Müllner
9062d5dc78 workspace: Clip background
So that windows don't overflow the workspace background.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1599>
2021-01-29 21:56:05 +00:00
Georges Basile Stavracas Neto
8eb81ae649 overview: Move background to Workspace
Move the background to the Workspace class by introducing a new container
called WorkspaceBackground, which handles clipping the background to the
workarea.

Move the click action from WorkspaceDisplay into each workspace.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1599>
2021-01-29 21:56:05 +00:00
Georges Basile Stavracas Neto
cfc1f1fd9c background: Add option to not use background content size
Will be used by next commit to draw workspaces at a different size of the
background itself.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1599>
2021-01-29 21:56:05 +00:00
Georges Basile Stavracas Neto
862b5be7a2 background: Trivial style cleanup
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1599>
2021-01-29 21:56:05 +00:00
Florian Müllner
b84eb2437d workspaceThumbnails: Expand workspaces before scale-in animation
When the original animation was implemented, workspaces would only
ever be added at the end. We therefore got away with not having a
separate EXPANDING stage corresponding to the existing COLLAPSING
one when animating out.

Since support for creating in-between workspaces via DND was added,
this is no longer the case. And now that the thumbnails are centered,
the jump is quite noticeable.

Address this by adding new transitional states, so that we can
expand new thumbnails before scaling them in.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1609>
2021-01-29 17:55:44 +01:00
Florian Müllner
ac3faac38c overviewControls: Remove intermediate box
Now that the workspace switcher moved into the view selector, the
box only holds a single child. Cut out the middle man and add that
directly to the parent.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1609>
2021-01-29 17:49:52 +01:00
Georges Basile Stavracas Neto
9db9445b0f workspaceThumbnail: Scale workspaces in and out
Make the slide property control the workspace scale, so that new workspaces
scale up, and destroyed workspaces scale down. The scale is done horizontally,
and only slightly vertically, as per design direction.

Rework the state tracking mechanism to remove the COLLAPSING state, since there's
no split between sliding out and collapsing anymore. Also remove the corresponding
'collapse-fraction' property from WorkspaceThumbnail.

Make ThumbnailsBox.vfunc_get_preferred_width() consider the slide-position property.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
2021-01-29 15:01:03 +00:00
Georges Basile Stavracas Neto
df2181c913 workspaceThumbnail: Use current number of workspaces for sizes
There are situations where MetaWorkspaceManager and ThumbnailsBox disagree
on the number of workspaces, for example when animating them out. It's more
important to follow the visible number of workspaces while they're updated.

Make vfunc_get_preferred_width() and vfunc_get_preferred_height() use the
current number of workspace thumbnails to calculate their sizes, instead of
MetaWorkspaceManager's n-thumbnails property.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
2021-01-29 15:01:03 +00:00
Georges Basile Stavracas Neto
d368bae503 workspaceThumbnail/thumbnailsBox: Set pivot point
Set the pivot point at the center of the ThumbnailsBox so that scaling
in and out looks better.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
2021-01-29 15:01:03 +00:00