Recent mutter changes made MetaShapedTexture not a ClutterTexture,
but instead a special ClutterActor subclass that implemented the texture-y
bits itself. Use recently introduced API in MetaShapedTexture so that we can
get the raw texture data and spit it out as a PNG.
Use the new meta_shaped_texture_get_image() to get a window's texture data.
meta_shaped_texture_get_image() flattens the image against any mask it may
have, so a screenshot of it should look exactly as it does on the display.
https://bugzilla.gnome.org/show_bug.cgi?id=662486
Instead of adding every rendered frame into the recording, drop frames
and only buffer and record enough frames to match the target framerate.
Increase the default frame rate from 15 to 30, since now that we're
actually enforcing framerate, it's noticeable that 15fps is not smooth.
https://bugzilla.gnome.org/show_bug.cgi?id=669066
The default pipeline was fairly aggressive about quality, and could
be too expensive for some computers. Decrease the quality setting for
the vp8 codec from 10 to 8, and increase the speed setting from 2 to 6.
(Basically, quality affects the visual fidelity of the end result, while
speed affects how much CPU the encoder uses to get a high compression
ratio at that quality level.)
Remove videorate from the pipeline, since the GStreamer VP8 encoder can
handle variable-framerate streams. This means that we won't spend CPU
encoding duplicate frames added by videorate.
https://bugzilla.gnome.org/show_bug.cgi?id=669066
We need to indicate that our GStreamer source produces timestamped
frames, instead of the default, which is to produce a stream of bytes.
This is needed for correctness, and to avoid warnings for some
pipelines.
https://bugzilla.gnome.org/show_bug.cgi?id=669066
For the Intel drivers, using glReadPixels() to read into client-memory
directly from the frame buffer is much slower than creating a pixel
buffer, copying into that, and then mapping that for reading. On other
drivers, the two approaches are likely to be similar in speed. Create
a ShellScreenGrabber abstraction that uses pixel buffers if available.
Use that for screenshots and screen recording.
https://bugzilla.gnome.org/show_bug.cgi?id=669065
Use the correct clip offsets when taking the screenshot of a window, to
exclude possible invisible borders and to include the case where the
window doesn't have any frame itself.
.desktop files have been designed for browsing, so the existing
fields often produce insufficient results when used for search.
gnome-control-center used X-GNOME-Keywords for that purpose, which
has now been standardized as Keywords. It makes sense for us to
support it in gnome-shell as well (and encourage its use outside
of settings panels).
https://bugzilla.gnome.org/show_bug.cgi?id=609702
It seems that Debian has their own prefixes in something like
debian-xterm.desktop. To properly do application matching in these cases,
we need to strip the debian- prefix.
https://bugzilla.gnome.org/show_bug.cgi?id=665647
Writting the screenshot to a file can take a relativly long time
in which we block the compositor, so do that part in a separate
thread to avoid the hang.
https://bugzilla.gnome.org/show_bug.cgi?id=652952
A new texture has undefined contents - when we're creating a shadow,
we need to clear the contents of the texture before drawing the border
and background into it.
https://bugzilla.gnome.org/show_bug.cgi?id=668048
g_dbus_method_invocation_return_value() adopts a floating reference,
so we don't also need to unreference it; fix by replacing the code
using a more compact form using the ^ convenience character in
GVariant type specifications. (Thanks to Ryan Lortie for the
suggestion.)
https://bugzilla.gnome.org/show_bug.cgi?id=667378
According to the GIO docs, sections can have labels too. We support
them by inserting a non reactive menu item at the beginning of the
section. This item is specially flagged to be ignored while processing
changed signals from the model (since it does not correspond to any
model item)
https://bugzilla.gnome.org/show_bug.cgi?id=666681
shell_embedded_window_hide() can be called during widget destruction,
after the associated ClutterActor has been already cleared out.
Fix a crash in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
The application proxy is created asynchrously after the dbus name
is registed. This means that when tracking the first window (and
therefore creating the first window GActionGroup) there is no
app proxy yet.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
Implement the background-size CSS property, specified by the CSS
Backgrounds and Borders Module Level 3, including the keywords
"contain", "cover", and fixed-size backgrounds.
https://bugzilla.gnome.org/show_bug.cgi?id=633462
It's not guaranteed that the application DBus proxy appears before
we receive the first focus event from the toplevel window.
Ensure that the first method to access the action muxer creates it if
hasn't been created yet.
We now have GRemoteActionGroup interface with the needed API,
implemented by GDBusActionGroup.
With the new API we could theoretically turn GActionMuxer itself into a
GRemoteActionGroup and expose the _full API to the shell so that the
timestamps could be passed from there.
Pass the current timestamp as platform data when activating
an action. This is implemented slightly hacky, since we use
clutter_get_current_event_time() to get at the timestamp, but
the alternative is to expose g_action_muxer_activate_action_full
to js, which would be quite a bit more involved.
GTK+ also exports window-specific actions, by putting the object path
for the exported action group in the _DBUS_OBJECT_PATH X property.
We add this action group to the app's muxer with a 'win' prefix,
since that is what the exported menu expects. Whenever the focus
window changes, we update the window-specific actions of its
application, and emit notify::action-group to cause the app
menu to be updated.
GDBusActionGroup api has changed again, adapt to that.
Also, use a GActionMuxer to add the 'app.' prefix to actions,
instead of manually stripping it out of the action names.
In the future, the muxer will also contain per-window actions
with a 'win.' prefix.
GMenuProxy has been replaced by GDBusMenuModel, and the object path
has been moved (now needs to be retrieved from the AppMenu GApplication
property).
Update the test to prefix each action with "app." as documented,
and use a GtkApplicationWindow instead of a plain GtkWindow.
Use the new GApplication support in ShellApp to create the application
menu. Supports plain (no state), boolean and double actions.
Includes a test application (as no other application uses GApplication
for actions)
https://bugzilla.gnome.org/show_bug.cgi?id=621203
GDBusActionGroup and GMenuProxy are new objects in GIO 2.32 that
help with accessing menus and actions of remote applications.
This patch makes it possible for the shell to associate an
application with a dbus name and from that a GMenu, that will
be shown as the application menu.
https://bugzilla.gnome.org/show_bug.cgi?id=621203
grid_width and grid_height were inverted, which caused a crash
in GdkPixbuf code. This was never noticed because the animation
in the panel is a square.
https://bugzilla.gnome.org/show_bug.cgi?id=666606
commit 5350302b09 dropped the possibility
to make a dbus name acquisition failure non-fatal.
Btw, it has also overriden the name in the error message.
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
Signed-off-by: Colin Walters <walters@verbum.org>
https://bugzilla.gnome.org/show_bug.cgi?id=663941
Rewrite code acquiring dbus names so that it uses GDBus, and rewrite
ShellDBus so that it is exposed on the GDBus connection. Ports of
the other objects will follow.
https://bugzilla.gnome.org/show_bug.cgi?id=648651
Not all desktop files tracked by the shell have
Exec lines. This could be because they're actually
run by another process, for instance, and the desktop
file is merely there to provide metadata. For example,
nautilus-pastebin provides a desktop file without an
Exec line.
The shell currently crashes if one of these partial
desktop files is installed and the user attempts to
search from the overview.
commit 37726a4cb6 fixed
a similar crasher.
This commit fixes the next one lower in the code.
https://bugzilla.gnome.org/show_bug.cgi?id=663815
Instead of saving the last_used_time per-app, grab the maximum time for all
windows. The logic is less hard to keep track of, and it solves some edge
case issues where windows that no longer exist update the user time, even
if none of the other windows have been used recently.
https://bugzilla.gnome.org/show_bug.cgi?id=660650
Allow push_modal to optionally only work with a keyboard only grab and
use that in altTab as a fallback to allow switching windows while a pointer grab
is in effect (like during DND operations).
https://bugzilla.gnome.org/show_bug.cgi?id=660457
For some reason, the texture cache decides to make a request and then look up
an icon in the icon theme. If it's valid, it just returns, fine, but if it
doesn't add the icon, it tries to undo the request, leaking an
AsyncTextureLoadData that isn't freed in the process.
https://bugzilla.gnome.org/show_bug.cgi?id=660968
Rather than have five or six structs allocated duplicating data,
just keep one and simplify the code considerably.
Again, part of my ongoing quest to merge St and Mx.
https://bugzilla.gnome.org/show_bug.cgi?id=660968
shell_global_get_memory_info tries to zero initialize the output
parameter with memset, but it passes the wrong size (because of
a missing *). There's no reason to do the memset, though. In the
normal case all members of the struct gets initialized before the
function returns anyway.
This commit drops the memset call in favor of one explicit 0 assignment
that only gets executed on on atypical platforms.
https://bugzilla.gnome.org/show_bug.cgi?id=662236
Without the desktop, even Nautilus hardcodes "Home" in all places
nowadays (except for the desktop itself). I think a run-time dependency
on nautilus being installed (GSettings will abort if the schema is not
found) is not worth it to keep compatibility with the desktop.
(Also, nautilus itself could probably hardcode "Home" for the desktop as
well and remove the preference).
https://bugzilla.gnome.org/show_bug.cgi?id=659895
If we add a 0-sized actor with a border-radius, we will crash as we try to
allocate a 0-sized texture in Cogl. Bail out early instead of doing that.
https://bugzilla.gnome.org/show_bug.cgi?id=661617
We originally OR'ed search terms and favored results which matched
multiple times to get more relevant results. When changing search
to AND search terms, the semantics of "multiple matches" were
changed to refer to a single term matching multiple criteria (name,
executable), which seemed like a good idea at the time.
However in practice this just results in applications whose
user-visible name matches the executable name on disk being
favored over applications using a more generic name, which
isn't too useful (in particular when taking usage frequency
into account).
https://bugzilla.gnome.org/show_bug.cgi?id=623372
Currently we use a very strict definition of "prefix", where the
search term has to match at the very beginning of the searched
criteria (application name, executable name). Use a more liberal
definition by including matches where the preceding character is
a space (application name) or hyphen (executable name) as well;
as many applications use a prefix, this should improve the quality
of results.
https://bugzilla.gnome.org/show_bug.cgi?id=623372
Application search results are internally categorized in four sets,
multiple and single prefix matches and multiple and single substring
matches. Each set is currently sorted alphabetically by application
name when concatenating the sets to the final result.
Change the last step to sort each set by usage frequency instead,
which is more likely to favor the most relevant match than
"arbitrary" alphabetic order.
https://bugzilla.gnome.org/show_bug.cgi?id=623372
Require that all terms match. This is the expected behaviour
and matches what gnome-contacts does. Keep the prefix/infix
weights in place for now.
https://bugzilla.gnome.org/show_bug.cgi?id=660912
Folks uses collection/set objects from libgee to store email addresses
associated with an individual. Unfortunately to extract addresses, parts
of libgee which are unusable from (introspected) bindings have to be
used[0], so add a helper method.
[0] in particular gee_iterator_get(), which is annotated as
"return: (transfer full): gpointer"
https://bugzilla.gnome.org/show_bug.cgi?id=660580
Match folks' name and nick fields, in addition to alias,
and look at email addresses in addition to im addresses.
This is more in line with what gnome-contacts does.
To match this new usage, rename the ALIAS_..._WEIGHT and
IM_..._WEIGHT constants to NAME_ and ADDR_, respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=660580
The translate coordinates are calculated as the offset after the scale, so it
needs to be applied after the scale as well. This fixes random centering issues
in the UI.
https://bugzilla.gnome.org/show_bug.cgi?id=660674
For GIcons we use g_icon_to_string() in the key, but the function
will return NULL if the icon cannot be serialized. As a result,
all non-serializable GIcons of the same size end up with the same
cache key - an example for this are contacts with avatars, which
currently all end up with the same image.
To fix, opt out of caching for GIcons which cannot be serialized.
https://bugzilla.gnome.org/show_bug.cgi?id=660585
Setting up the framebuffers for transitions may fail, in which case
the material used for drawing is left uninitialized, so trying to
access it results in a crash.
Instead bail out in this case, which means that we won't paint
anything during the transition - still, drawing errors are better
than crashes ...
https://bugzilla.gnome.org/show_bug.cgi?id=659676
While we allow for arbitrary modifiers in keybindings, both the
alt-tab and ctrl-alt-tab popups close when ALT is not present in
the modifier mask, resulting in ALT being de-facto hardcoded.
Instead, pass the actual modifier mask when invoking the popups.
https://bugzilla.gnome.org/show_bug.cgi?id=645200
VPN secrets are currently unhandled by the UI code. To avoid
lengthy timeouts, bail out early with an error, so NetworkManager
falls back to the nm-applet agent directly.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
Commit 0af108211c introduced a
regression where applications that appear in multiple categories were
duplicated in the "All Apps" list, because we switched from
uniquifying on desktop file ID to the GMenuTreeEntry.
Switch back to keeping the set of apps based on ID. To flesh this
out, we keep the ShellApp instance for a given ID around forever, and
when we're loading new contents, we replace the GMenuTreeEntry inside
the app. That means callers still get new data.
We still keep around the running app list, though we could just
recompute it from the app list now.
https://bugzilla.gnome.org/show_bug.cgi?id=659351
The apps and settings loading code duplicated the part to traverse a
GMenuTree. Unify this by adding a new function to return a flattened
set.
This will also be useful for a future change to how we store apps -
this way we can look at both the current set of apps and the new set.
https://bugzilla.gnome.org/show_bug.cgi?id=659351
Instead of doing complex computations in the shader just pass in the correct
fade area (taking padding, scrollbars and rtl into account) and just work
with that in the shader.
That fixes a bug where we would fade the scrollbar when padding is present.
https://bugzilla.gnome.org/show_bug.cgi?id=659159
The way the window dimmer shader is applied will cause rendering errors with
the rounded corners, invisible borders or shaped textures since it doesn't deal
well with the multitexturing used by the MetaShapedTexture. Use an off-screen
buffer to flatten the texture before being applied.
https://bugzilla.gnome.org/show_bug.cgi?id=659302
While I've been trying to make the GC kick in more often, I've decided
it's a better tradeoff to aggressively GC at "leisure", for multiple
reasons.
We can and should revisit this at a later time, but basically:
* The shell doesn't generate *that* much JS data - garbage collection
is very fast here.
* Long periods without GC mean we're not calling free() when we
could, which in turn makes heap fragmentation much worse.
* Ensuring the GC runs at idle makes it much less likely we'll take
a random large GC hit in the middle of an animation.
https://bugzilla.gnome.org/show_bug.cgi?id=659254
It was always taking the first .service.in file to create all .service
files: org.gnome.Shell.CalendarServer.service.in was the only one being
used.
https://bugzilla.gnome.org/show_bug.cgi?id=659194
Base ShellStack on StContainer rather than ClutterGroup, so that it
has StWidget-y features (and so we don't have to "cheat" in
shell_stack_allocate()). Implement navigate_focus() to only ever pass
focus into the top-most child, since doing otherwise would be
surprising.
https://bugzilla.gnome.org/show_bug.cgi?id=646934
The translation is taken from GTK+, so translations in the gnome-shell
domain are pointless - hide the string, so that it is not extracted
by xgettext.
In particular, document that you can ignore the get-preferred-*
signals if and only if you have a fixed width/height specified by some
other means.
https://bugzilla.gnome.org/show_bug.cgi?id=657986
This patch fixes the "apps vanish from alt-TAB bug".
If a "package system" rips away and possibly replaces .desktop files
at some random time, we have historically used inotify to detect this
and reread state (in a racy way, but...). In GNOME 2, this was
generally not too problematic because the menu widget was totally
separate from the list of windows - and the data they operate on was
disjoint as well.
In GNOME 3 we unify these, and this creates architectural problems
because the windows are tied to the app.
What this patch tries to do is, when rereading the application state,
if we have a running application, we keep that app around instead of
making a new instance. This ensures we preserve any state such as the
set of open windows.
This requires moving the running state into ShellAppSystem. Adjust
callers as necessary, and while we're at it drop the unused "contexts"
stuff.
This is just a somewhat quick band-aid; a REAL fix would require us
having low-level control over application installation. As long as
we're on top of random broken tar+wget wrappers, it will be gross.
A slight future improvement to this patch would add an explicit
"merge" between the old and new data. I think probably we always keep
around the ShellApp corresponding to a given ID, but replace its
GMenuTreeEntry.
https://bugzilla.gnome.org/show_bug.cgi?id=657990
This adds contacts search to shell, powered by libfolks.
Changes:
- Add Folks and Gee to the build system
- ShellContactSystem, a backend in C
- ContactDisplay, search frontend in JS
https://bugzilla.gnome.org/show_bug.cgi?id=643018
This commit introduces a "session type" for
gnome-shell. It essentially defines what
mode of operation the shell runs in
(normal-in-a-users-session mode, or at-the-login-screen mode).
Note this commit only lays the groundwork. Actually
looking at the key and appropriately differentiating
the UI will happen in subsequent commits.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
shell_global_get() currently implicitly instantiates the shell
global singleton the first time it's called. This means there's
no opportunity to set construction-time properties on the singleton.
This isn't an issue yet, because there aren't any. We will need it
in the future, though, when we grow a --gdm-mode that gets exposed as
a property through the global singleton.
This commit adds a new _shell_global_init() function that must be
invoked before shell_global_get() can be called.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
StAdjustment has some non-functional and unused animation vestiges
like the "elastic" property, st_adjustment_interpolate() and
st_adjustment_clamp().
This commit vacuums that stuff up so it doesn't tempt anyone into
trying to use it.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
A network agent is a component that stores network secrets (like
wifi passwords) in the session keyring. This commit adds an
implementation of it to be used by the shell network dialogs. It
handles most of the keyring stuff, delegating the UI to upper layers.
https://bugzilla.gnome.org/show_bug.cgi?id=650244
Adds get_state() and ::state-changed signals, that replace connecting
and ready, as well as providing indication of when the object was closed
or the connection to PulseAudio failed.
https://bugzilla.gnome.org/show_bug.cgi?id=645708
During a state transition from running to not-running for
window-backend apps, it's possible we get a request for the icon.
Avoid asserting here and just return an empty image.
https://bugzilla.gnome.org/show_bug.cgi?id=656546
Adds methods to shell_global to allow taking screenshots
save the result into a specified png image.
It exposes three methods via shellDBus applications like
gnome-screenshot:
*) Screenshot (screenshots the whole screen)
*) ScreenshotWindow (screenshots the focused window)
*) ScreenshotArea (screenshots a specific area)
https://bugzilla.gnome.org/show_bug.cgi?id=652952
As danw points out,
"It's unique during the lifetime of the window, but reasonably likely to be
reused by another window after this one is destroyed. Using
meta_window_get_stable_sequence() might be better."
https://bugzilla.gnome.org/show_bug.cgi?id=648149
Since almost all of the callers of shell_app_activate were using the
default workspace (by passing -1), remove that parameter.
Add a new shell_app_activate_full() API which takes a workspace as
well as a timestamp; previously we might have been ignoring event
timestamps from elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=648149
This dramatically thins down and sanitizes the application code.
The ShellAppSystem changes in a number of ways:
* Preferences are special cased more explicitly; they aren't apps,
they're shortcuts for an app), and we don't have many of them, so
don't need e.g. the optimizations in ShellAppSystem for searching.
* get_app() changes to lookup_app() and returns null if an app isn't
found. The semantics where it tried to find the .desktop file
if we didn't know about it were just broken; I am pretty sure no
caller needs this, and if they do we'll fix them.
* ShellAppSystem maintains two indexes on apps (by desktop file id
and by GMenuTreeEntry), but is no longer in the business of
dealing with GMenuTree as far as hierarchy and categories go. That
is moved up into js/ui/appDisplay.js. Actually, it flattens both
apps and settings.
Also, ShellWindowTracker is now the sole reference-owner for
window-backed apps. We still do the weird "window:0x1234beef" id
for these apps, but a reference is not stored in ShellAppSystem.
The js/ui/appDisplay.js code is rewritten, and sucks a lot less.
Variable names are clearer:
_apps -> _appIcons
_filterApp -> _visibleApps
_filters -> _categoryBox
Similarly for function names. We no longer call (for every app) a
recursive lookup in GMenuTree to see if it's in a particular section
on every category switch; it's all cached.
NOTE - this intentionally reverts the incremental loading code from
commit 7813c5b93f. It's fast enough
here without that.
https://bugzilla.gnome.org/show_bug.cgi?id=648149
Add a helper function (mostly copied from gtkcalendar.c) for getting
the first week day for the current locale, using nl_langinfo if
available and falling back to the GTK+ gettext fallback otherwise.
Use that function in the calendar, so that the LC_TIME setting is
used if possible.
https://bugzilla.gnome.org/show_bug.cgi?id=649078
If a container is not clip-to-allocation, then its get_paint_volume()
needs to include the paint volumes of all of its children, since they
(or their children) may paint outside the container's allocation.
Also, if the superclass get_paint_volume() returns FALSE, then the
subclass should return FALSE too.
https://bugzilla.gnome.org/show_bug.cgi?id=655812
MetaPlugin wraps a bunch of compositor (and plain metacity) methods
that we can just call ourselves, so just do that. (Presumably this
dates back to some ancient time when it was imagined that plugins
wouldn't need access to the full metacity API.)
https://bugzilla.gnome.org/show_bug.cgi?id=654639
Rather than constantly asking mutter for the MetaScreen, and then
figuring out the MetaDisplay/Display/etc from there, just keep track
of everything we care about inside ShellGlobal.
https://bugzilla.gnome.org/show_bug.cgi?id=654639
When porting to the new gnome-menus API in commit 8f3bdd4f1, the
initial loading of settings apps was left out, so settings panels
are neither found nor can be launched from the top panel menus.
The js modules have so many imports back and forth that it's pretty
much guaranteed that if you import even one of them, you'll end up
importing all of them, including ui.status.bluetooth and
ui.status.network. So fix up the typelib include paths the same way
gnome-shell-jhbuild does, so we can find everything.
https://bugzilla.gnome.org/show_bug.cgi?id=650298
Clutter 1.7.x introduced CLUTTER_CAIRO_FORMAT_ARGB32: which can be used when
sharing textures/data with cairo without having to do check the
byte order and choose the appropriate format by hand.
https://bugzilla.gnome.org/show_bug.cgi?id=654577
Update the sample to be more up to date with respect to Shell practices,
and make it look a bit prettier. Additionally, change the file extract
code so that it's easier to update and add new files later.
https://bugzilla.gnome.org/show_bug.cgi?id=653206
Ideally, this would be an entirely-JS implementation, but we have a
couple of issues with gjs and gobject-introspection to work around, so
we need a ShellMountOperation class for the time being.
This first commit implements the show-processes dialog, with a system
modal style very similar to the EndSession dialog.
Implementations of ask-question and ask-password will follow shortly.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
The sniffer is a simple helper process, activated as a DBus service,
that tries to crawl as many files as possible in the provided target
directory (i.e. the new mount's root), for a maximum amount of time -
which is set here to 1.5 seconds (i.e. it will crawl either all the
files in the directory tree, or as many as it can before the specified
timeout expires).
Crawled files are ordered by their content type, and a generic estimation
of the type of files composing the directory is returned to the caller,
using generic 'x-content/*' mimetypes.
The process will then set an autoquit timeout on itself, which can be
disabled by setting the env variable HOTPLUG_SNIFFER_PERSIST for
debugging purposes. The HOTPLUG_SNIFFER_DEBUG env variable can also be
set to enable debugging output.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
==17386== 1,669 (88 direct, 1,581 indirect) bytes in 1 blocks are definitely lost in loss record 4,090 of 4,151
==17386== at 0x4C24AF4: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==17386== by 0x691B099: g_malloc0 (in /usr/lib/libglib-2.0.so.0.2800.8)
==17386== by 0x692006A: g_option_context_new (in /usr/lib/libglib-2.0.so.0.2800.8)
==17386== by 0x5124C57: meta_get_option_context (in /usr/lib/libmutter.so.0.0.0)
==17386== by 0x401D4F: main (in /usr/bin/gnome-shell)
https://bugzilla.gnome.org/show_bug.cgi?id=654269
The gconf keys used to restore GNOME aren't in a proper GNOME3 environment.
To mimic what GNOME3 gnome-session does would be extremely complicated, so
just launch the system gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=654527
The cogl path pads the corners out to the maximum corner radius to make the
math and painting logic easier. Unfortunately, when the radius exceeds the
actor's halfsize, the padding ends up interfering with other corners, creating
a big mess of rendering errors.
It'd be extremely complicated to fix this properly in the Cogl code,
so take the Cairo fallback.
https://bugzilla.gnome.org/show_bug.cgi?id=649513
Currently, any cases of overlapping corners were just ignored and rendered incorrectly.
Implement the corner overlap algorithm as specified by the W3C to fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=649513
Unfortunately, gjs cannot handle binary C strings directly from
gobject-introspection. Add a simple workaround method in C to help
us save random files from the web.
https://bugzilla.gnome.org/show_bug.cgi?id=653989
Remove ShellGlobal's monitor-related methods, and have
Main.layoutManager provide that information instead. Move
Main._relayout() to LayoutManager, and have other objects connect to
the layout manager's 'monitors-changed' signal to know when the screen
geometry has changed.
https://bugzilla.gnome.org/show_bug.cgi?id=636963
shell_util_get_file_display_name_if_mount() uses a nautilus setting
to use a name for $HOME which is consistent with the file manager.
But while nautilus was ported to GSettings a while ago, we are still
trying to access the old GConf setting.
https://bugzilla.gnome.org/show_bug.cgi?id=653511
Only skip the areas of the scrollbars when they are invisible
and add take the horizontal scrollbar into account as well
when calculating the faded area.
https://bugzilla.gnome.org/show_bug.cgi?id=651866
jhbuild will default to srcdir != builddir in the future for various
reasons.
The enum generation rules were just broken and both did
cd $(srcdir) and $(addprefix $(srcdir)).
Also, remove an unnecessary $(addprefix) from the GIR sources; thanks
to Dan Winship for pointing out that make will look in both srcdir and
builddir, so it's not necessary to add a prefix explicitly. Doing so
breaks obviously when adding the sourcedir to a builddir file.
https://bugzilla.gnome.org/show_bug.cgi?id=653199
Using the list of stylesheets loaded with st_theme_load_stylesheet(),
one can build an StTheme that is completely identical to the previous
one, except for one property (application-stylesheet).
This allows rt and the user-theme extension to work while respecting
the theming of other extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=650971
As the Shell does more than observing channels (users can interact with them),
it has to be an Handler as well. We have to make sure that all the new
incoming text channels are handled by the Shell by default, so we make it an
Approver as well.
From an user point of view, the only difference is that Empathy's tray icon
will stop blicking when receiving new channels.
We rely on ChannelDispatcher.DelegateChannels() and PresentChannel() to
interact with Empathy. Those methods have been implemented in
telepathy-mission-control 5.9.0 and telepathy-glib 0.15.0.
shell_global_get_memory_info() is a new function which extracts a few
global counters we have already, namely glibc's mallinfo, spidermonkey's
JSGC_BYTES, and gjs' counters for boxed/object/etc wrappers.
There is some slight overlap with perf; ultimately though I'd
like this function to do some more extensive analysis, so it wouldn't
be quite the same.
perf is going to be mainly concerned with how big the whole process
over time is; memory_info is for debugging memory leaks.
https://bugzilla.gnome.org/show_bug.cgi?id=650692
Theme authors now have the power (and responsibility) of creating fade
effects with the new CSS length property '-st-fade-offset'. A value of
0 disables the effect.
This new CSS approach replaces the current programmatic toggle of
the 'vfade' property. A new CSS style class name 'vfade' is used as
a replacement for the old property.
https://bugzilla.gnome.org/show_bug.cgi?id=651813
cogl_read_pixels() used to only support a useless pixel format, but it
will do our preferred format now, so use it rather than doing GL stuff
by hand.
https://bugzilla.gnome.org/show_bug.cgi?id=648758
Remove a workaround for clutter_actor_get_transformed_position() not
working inside paint(), and remove a comment about
ClutterText::position not being properly notified, since it is now.
(However, it doesn't seem worth it to rewrite the code to use
notification, since that would actually end up being more complicated
than the current solution.)
https://bugzilla.gnome.org/show_bug.cgi?id=648758
StScrollBar was tracking whether or not it currently had a valid
allocation, but since Clutter 1.4 there is a method it can call to get
that information instead.
https://bugzilla.gnome.org/show_bug.cgi?id=648758
A new envrionment variable GNOME_SHELL_ENABLE_CLEANUP is added which
causes us to attempt freeing global data. The reason this isn't
enabled by default is that it's a waste of time at best, and at
worst in corner cases could cause crashes which would fill up
crash databases. Better to leave it as a developer-only tool.
Start stubbing out some cleanup in ShellGlobal.
https://bugzilla.gnome.org/show_bug.cgi?id=649517
Move some more environment-initializationy stuff from main.js to
environment.js, and be more careful about not importing shell JS
modules until after the environment has been fully patched.
Change gnome-shell-plugin to call Environment.init() before
Main.start(); this means that Environment.init() now runs before any
shell JS modules (besides environment itself) have been imported.
Make run-js-test create a ShellGlobal and use its js_context, so that
the shell_global_set_property_mutable() stuff in Environment.init()
will work correctly in tests as well.
https://bugzilla.gnome.org/show_bug.cgi?id=649203
The tests were broken again, because since Shell-0.1.gir now has
'shared-library="libgnome-shell.so"', the references to Shell.PerfLog
ended up pulling in libgnome-shell in addition to the copy of
shell-perf-log.c that libjs-test was built with.
Fix all this hopefully forever by just making run-js-test link to
libgnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=649203
shell-global had become a dumping ground for functions that didn't
have anywhere else to be. Make shell-util the dumping ground instead,
and have shell-global only have methods that involve the ShellGlobal
object.
https://bugzilla.gnome.org/show_bug.cgi?id=648755
==13810== 11,360 bytes in 1 blocks are definitely lost in loss record 18,574 of 18,765
==13810== at 0x4005447: calloc (vg_replace_malloc.c:467)
==13810== by 0x5191882: standard_calloc (gmem.c:107)
==13810== by 0x51920A7: g_malloc0 (gmem.c:196)
==13810== by 0x4056201: blur_pixels (st-private.c:466)
==13810== by 0x40573B4: _st_create_shadow_cairo_pattern (st-private.c:710)
==13810== by 0x4070746: st_theme_node_paint (st-theme-node-drawing.c:856)
==13810== by 0x3FEFFFFF: ???
https://bugzilla.gnome.org/show_bug.cgi?id=649497
When activating an uninteresting window, the last_user_time isn't updated,
because we aren't tracking the window that the user_time gets updated on.
Hack around this by setting the last_user_time in shell_app_activate when
activating an uninteresting window.
https://bugzilla.gnome.org/show_bug.cgi?id=643302
When activating an uninteresting window, the last_user_time isn't updated,
because we aren't tracking the window that the user_time gets updated on.
Hack around this by setting the last_user_time in shell_app_activate when
activating an uninteresting window.
https://bugzilla.gnome.org/show_bug.cgi?id=643302
This property represents that the widget is being labelled by an
actor. The name is label-actor to avoid problems with the current
StButton:label and StTooltip:label
Before this change, we displayed dialogs on the monitor containing the
focused window if there was any, otherwise on monitor 0. We now use
the primary monitor rather than monitor 0 when no window has focus.
https://bugzilla.gnome.org/show_bug.cgi?id=648305
I unintentionally made .desktop->pid association "win" over
WM_CLASS. Fixing this makes the case of ancillary .desktop file
entry points (e.g. gnome-control-center's various shortcut .desktop
files) correctly show System Settings, and not whatever the shortcut
is.
In the future I'd like to have a way to say "this .desktop file
is a shortcut, ignore me" or something.
https://bugzilla.gnome.org/show_bug.cgi?id=646689
We weren't specifying _ALLOW_REPLACEMENT for anything except
org.gnome.Shell, which created a race - if the exiting process
didn't exit fast enough, the replacing process would fail
to get the name.
https://bugzilla.gnome.org/show_bug.cgi?id=646257
As a side effect of (see bug 642221), we no longer put docks or
transient windows into the hash table mapping windows to apps. The
"focused application" code relied on at least transients being in
there.
Fix this by calling the public API to map a window to an app, which
will at least follow transients. Whether we also want further
matching here (e.g. with window grouping) is another issue, but that
can happen as a different bug.
https://bugzilla.gnome.org/show_bug.cgi?id=647082
If a caller sets an StLabel's text to what it already is (as, eg, the
clock menu does), do nothing. Unless the label is editable, in which
case, setting the text has a visible side effect (dropping the
selection), so we don't optimize that out.
https://bugzilla.gnome.org/show_bug.cgi?id=645648
Add an uninstall-hook to undo the effect of install-exec-hook, and add
an $(AM_V_GEN) to the rule that copies either gnome-shell-real or
gnome-shell-jhbuild to gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=646730
If we're unmapped (or destroyed) during a scroll, we want to clean
up the changes we've made to Clutter's event handling, remove our
signal handler, and emit ::scroll-stop.
https://bugzilla.gnome.org/show_bug.cgi?id=646825
Adding correct annotations to Gio.File.load_contents revealed that gjs
doesn't actually support array+length combinations. For 3.0 this would
be invasive to fix, so add a method to ShellGlobal which does what
we need.
https://bugzilla.gnome.org/show_bug.cgi?id=646333
Add a function that gets the current allocation of an actor
transformed into stage coordinates. This avoids a misfeature of
clutter_actor_get_transformed_size() where when a size request is
queued (even if it won't eventually change the size), the returned
value is the transformed size request rather than the last allocation.
https://bugzilla.gnome.org/show_bug.cgi?id=645744
settings.menu was removed in gnome-menus commit
b68bcd27f44ce2c494f6e3cd9695890b9c02af04; gnomecc.menu is the intended
replacement.
(On Red Hat Linux derived systems, settings.menu continues to exist)
https://bugzilla.gnome.org/show_bug.cgi?id=645063
Previously (because I suck) we were ignoring the return value of
RequestName, and so we'd totally ignore the fact that we failed
to acquire the DBus name.
Make this consistent by using meta_get_replace_current_wm() and
if we're in --replace, actually replace immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=645593
The next draft of the CSS Backgrounds and Borders module will actually
define when the blur radius means. Fix our code to use that definition
(2 * standard deviation) rather than using the 1.9 * that we extracted
from what Mozilla was doing.
https://bugzilla.gnome.org/show_bug.cgi?id=632506
Some functions in StTextureCache enforce square ClutterTextures,
even in cases where the underlying CoglTexture has a different
width:height ratio.
Add padding in those cases to keep the resulting image from being
stretched.
https://bugzilla.gnome.org/show_bug.cgi?id=643866
If, for example, the stage is divided into multiple monitors, we
might want to constrain tooltips so they don't cross monitor boundaries.
Add a function to set a per-stage callback to constrain tooltips.
https://bugzilla.gnome.org/show_bug.cgi?id=645547
Instead of showing tooltips immediately on hover, wait until a timeout
after the last motion (timeout is given by the gtk-tooltip-timeout
GtkSetting.)
https://bugzilla.gnome.org/show_bug.cgi?id=642871
Use ClutterContainer functions for adding the tooltip instead of
calling clutter_actor_set_parent behind the stage's back, and do
it inside st_widget_show_tooltip (which is a normal method) instead
of overriding st_tooltip_show, which is a vfunc and it is called
internally by Clutter, therefore it is limited in what it can safely
do.
Also, instead of positioning the tooltip with clutter_actor_set_position,
modify the anchor point when the associated widget moves, so that
only a redraw is queued.
https://bugzilla.gnome.org/show_bug.cgi?id=635100
Inside the Shell, all the UI (including chrome, the overview, and
the actual windows) is not a child of the stage but of a special
ClutterGroup, which is cloned inside the magnifier.
Add function for setting this special actor so that actors added by
St are visible in the magnifier. Nothing yet uses this, but the
tooltip will soon.
https://bugzilla.gnome.org/show_bug.cgi?id=635100
As of commit 34ce17c4b3, search results use large icons, or thumbnails
when available. To keep the amount of upscaling for the latter as small
as possible, request a large thumbnail size.
https://bugzilla.gnome.org/show_bug.cgi?id=645493
If you have XFixes 5 (and corresponding xserver support) then we
add barriers on the panel and in the message tray corner so that
its easy to reach the corners even when there are monitors to the
sides of the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=622655
If the pointer moves on or off the stage while another process has a
grab, we will lose track of it. One example of this is that if you use
a popup menu from a message tray trayicon, the tray will stay up after
the menu goes away, because the shell never saw the pointer leave it.
Add a new method shell_global_sync_pointer() that causes clutter to
recheck what actor is under the pointer and generate leave/enter
events if appropriate.
Of course, we can't actually tell for sure when another process has a
grab, so we need a heuristic of when to call this. Currently we call
it from Chrome._windowsRestacked(), which is not really the right
thing at all, but does fix the menu-from-trayicon case...
https://bugzilla.gnome.org/show_bug.cgi?id=630842
If the user clicks on the title of a trayicon's SummaryItem, forward
that click to the trayicon. Also adjust
gnome_shell_plugin_xevent_filter() so that if the trayicon takes a
grab as a result of this, we don't hide the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=630842
