isa/mutter
1
0
Fork 0
mirror of https://github.com/brl/mutter.git synced 2024-11-26 10:00:45 -05:00
Code Issues Packages Projects Releases Wiki Activity
0f613ea134
mutter/doc/cookbook/textures.xml
Emmanuele Bassi abef73bb58 Replace cogl_color_set_from_* with cogl_color_init_from_* 
The former is not yet "officially" deprecated by the latter, but it's
confusing to have them both in the code base.
2010-09-03 16:58:47 +01:00

1381 lines
47 KiB
XML
Raw Blame History

<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<chapter id="textures"
xmlns:xi="http://www.w3.org/2003/XInclude">
<title>Textures</title>
<epigraph>
<attribution>Antoine de Saint-Exupery</attribution>
<para>A rock pile ceases to be a rock pile the moment a single man
contemplates it, bearing within him the image of a cathedral.</para>
</epigraph>
<section id="textures-introduction">
<title>Introduction</title>
<para>Textures are one of the most important actors in Clutter. Whether
they are employed as the background for a user interface control, or
to show the picture of a kitten, a big part of any Clutter-based
application is going to involve textures.</para>
<para>A ClutterTexture is an actor that can hold any raw image data and
paint it. ClutterTexture can also load image data from a file on disk and
convert it.</para>
<note><para>The actual formats supported by ClutterTexture depend on the
platform on which Clutter is being used.</para></note>
</section>
<section id="textures-drawing-with-cairo">
<title>Drawing 2D graphics onto a texture</title>
<section>
<title>Problem</title>
<para>You want to draw 2D graphics inside a Clutter application.</para>
</section>
<section>
<title>Solution</title>
<para>Create a <type>ClutterCairoTexture</type>, then draw onto
the Cairo context it wraps using the Cairo API:</para>
<informalexample>
<programlisting>
ClutterActor *texture;
cairo_t *cr;
guint width, height;
width = 800;
height = 600;
texture = clutter_cairo_texture_new (width, height);
cr = clutter_cairo_texture_create (CLUTTER_CAIRO_TEXTURE (texture));
/*
* write onto the Cairo context cr using the Cairo API;
* see <ulink url="http://cairographics.org/manual/">the Cairo API reference</ulink> for details
*/
cairo_move_to (cr, 0, 0);
cairo_line_to (cr, 800, 600);
cairo_stroke (cr);
/* does the actual drawing onto the texture */
cairo_destroy (cr);
</programlisting>
</informalexample>
<para>Here's a <ulink url="http://cairographics.org/tutorial/">useful
Cairo tutorial</ulink> if you want to learn more about the Cairo API
itself.</para>
</section>
<section>
<title>Discussion</title>
<para>A <type>ClutterCairoTexture</type> is a standard
<type>ClutterActor</type>, so it can be added to a
<type>ClutterContainer</type> (e.g. a <type>ClutterStage</type>
or <type>ClutterGroup</type>), animated, resized etc. in the
usual ways.</para>
<para>Other useful operations:</para>
<itemizedlist>
<listitem>
<para><emphasis>To draw on part of the texture:</emphasis>
use <function>clutter_cairo_texture_create_region()</function> to
retrieve a Cairo context for the region you want to draw on.</para>
</listitem>
<listitem>
<para><emphasis>To clear existing content from a texture:</emphasis>
use <function>clutter_cairo_texture_clear()</function>.</para>
<para>You may need to do this as the texture reuses the same
Cairo context each time you call
<function>clutter_cairo_texture_create()</function> or
<function>clutter_cairo_texture_create_region()</function>.</para>
</listitem>
<listitem>
<para><emphasis>To resize the Cairo context wrapped
by a texture</emphasis>, use
<function>clutter_cairo_texture_set_surface_size()</function>.</para>
</listitem>
</itemizedlist>
<section>
<title>Drawing pages from a PDF onto a ClutterCairoContext</title>
<para>Other libraries may provide an API for writing onto a
Cairo context; you can make use of these APIs on the exposed
Cairo context of a ClutterCairoTexture. For example, you
can use the poppler-glib API to display pages
from a PopplerDocument inside a Clutter application:</para>
<informalexample>
<programlisting>
<![CDATA[
#include <poppler/glib/poppler.h>
/* snipped setup code (as above) */
/*
* cast to CLUTTER_CAIRO_TEXTURE, as the functions
* used below require that type
*/
ClutterCairoTexture *cc_texture = CLUTTER_CAIRO_TEXTURE (texture);
clutter_cairo_texture_clear (cc_texture);
gchar *file_uri = "file:///path/to/file.pdf";
guint page_num = 0;
double page_width, page_height;
PopplerDocument *doc;
PopplerPage *page;
GError *error = NULL;
doc = poppler_document_new_from_file (file_uri, NULL, &error);
page = poppler_document_get_page (doc, page_num);
poppler_page_get_size (page, &page_width, &page_height);
cr = clutter_cairo_texture_create (cc_texture);
/* render the page to the context */
poppler_page_render (page, cr);
cairo_destroy (cr);
]]>
</programlisting>
</informalexample>
<note><para>If the page is larger than the Cairo context,
some of it might not be visible. Similarly, if the
<type>ClutterCairoTexture</type> is larger than the stage,
some of that might not be visible. So you
may need to do some work to make the <type>ClutterCairoTexture</type>
fit inside the stage properly (e.g. resize the stage), and/or some work
to make the PDF page sit inside the Cairo context (e.g. scale the PDF
page or put it inside a scrollable actor).</para></note>
</section>
</section>
</section>
<section id="textures-aspect-ratio">
<title>Maintaining the aspect ratio when loading an
image into a texture</title>
<section>
<title>Problem</title>
<para>You want want to load an image into a texture
and scale it, while retaining the underlying image's aspect ratio.</para>
</section>
<section>
<title>Solution</title>
<para>Set the texture to keep the aspect ratio of the
underlying image (so it doesn't distort when it's scaled); use
the actor's <property>request-mode</property> property to set
the correct geometry management (see the discussion section); then
resize the texture along one dimension (height or width).
Now, when an image is loaded into the texture, the image is
scaled to fit the set height or width; the other dimension
is automatically scaled by the same factor so the image fits
the texture:</para>
<informalexample>
<programlisting>
<![CDATA[
ClutterActor *texture;
texture = clutter_texture_new ();
clutter_texture_set_keep_aspect_ratio (CLUTTER_TEXTURE (texture), TRUE);
/*
* this setting means the height of the scaled image is based on its width;
* it's not strictly necessary to set this, as this is the default
*/
clutter_actor_set_request_mode (texture, CLUTTER_REQUEST_HEIGHT_FOR_WIDTH);
/* set the width, which causes height to be scaled by the same factor */
clutter_actor_set_width (texture, 300);
clutter_texture_set_from_file (CLUTTER_TEXTURE (texture),
"/path/to/image.jpg",
NULL);
]]>
</programlisting>
</informalexample>
</section>
<section>
<title>Discussion</title>
<para>The <property>request-mode</property> for an actor
determines how geometry requisition is performed; in this case, this
includes how scaling is applied if you change the actor's
width or height. There are two possible values for
request-mode:</para>
<orderedlist>
<listitem>
<para>If set to <constant>CLUTTER_REQUEST_HEIGHT_FOR_WIDTH</constant>
(the default), changing the width causes the height
to be scaled by the same factor as the width.</para>
</listitem>
<listitem>
<para>If set to <constant>CLUTTER_REQUEST_WIDTH_FOR_HEIGHT</constant>,
changing the height causes the width to be scaled by the
same factor as the height.</para>
</listitem>
</orderedlist>
<para>In the example above, the texture is set to keep its
aspect ratio then fixed to a width of 300 pixels; the
request-mode is set to <constant>CLUTTER_REQUEST_HEIGHT_FOR_WIDTH</constant>.
If a standard, photo-sized image in landscape orientation were
loaded into it (2848 pixels wide x 2136 high), it would be scaled
down to 300 pixels wide; then, its height would be scaled by the
same factor as the width (i.e. scaled down to 225 pixels).</para>
<para>With request-mode set to
<constant>CLUTTER_REQUEST_WIDTH_FOR_HEIGHT</constant>,
you would get the same effect by setting the height first;
then, computation of the width for the scaled image would be
based on the scaling factor applied to its height instead.</para>
<para>You can work out which side of the source image is longest using
<function>clutter_texture_base_size()</function> to get its
width and height. This can be useful when trying to scale images
with different orientations to fit into uniform rows or columns:</para>
<informalexample>
<programlisting>
<![CDATA[
gint width;
gint height;
clutter_texture_get_base_size (CLUTTER_TEXTURE (texture), &width, &height);
]]>
</programlisting>
</informalexample>
<note><para>If you explicitly set the size (both width and height)
of a texture with <function>clutter_actor_set_size()</function> (or
with <function>clutter_actor_set_width()</function> and
<function>clutter_actor_set_height()</function>), any
image loaded into the texture is automatically stretched/shrunk to
fit the texture. This is the case regardless of any other settings
(like whether to keep aspect ratio).</para></note>
<note><para>Since a texture can scale down its contents, its minimum
preferred size is 0.</para></note>
</section>
</section>
<section id="textures-image-loading">
<title>Loading image data into a texture</title>
<section>
<title>Problem</title>
<para>You want to display an image inside a Clutter
application.</para>
</section>
<section>
<title>Solution</title>
<para>Create a <type>ClutterTexture</type> directly from an
image file:</para>
<informalexample>
<programlisting>
<![CDATA[
ClutterActor *texture;
GError *error = NULL;
gchar *image_path = "/path/to/image";
texture = clutter_texture_new_from_file (image_path, &error);
if (error != NULL)
{
// handle error
}
]]>
</programlisting>
</informalexample>
<para>Or create a texture and set its source to an image
file:</para>
<informalexample>
<programlisting>
<![CDATA[
ClutterActor *texture;
GError *error = NULL;
gchar *image_path = "/path/to/image";
gboolean loaded;
texture = clutter_texture_new ();
/*
* returns FALSE if file could not be loaded or texture
* could not be set from image data in the file
*/
loaded = clutter_texture_set_from_file (CLUTTER_TEXTURE (texture),
image_path,
&error);
if (error != NULL)
{
// handle error
}
]]>
</programlisting>
</informalexample>
</section>
<section>
<title>Discussion</title>
<para>Bear the following in mind when loading images into a
texture:</para>
<itemizedlist>
<listitem>
<para>An image load may fail if:
<itemizedlist>
<listitem>
<para>The file does not exist.</para>
</listitem>
<listitem>
<para>The image format is unsupported: most of the
common bitmap formats (PNG, JPEG, BMP, GIF, TIFF, XPM)
are supported, but more exotic ones may not be.</para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>Whether you're creating a texture from an image file,
or loading an image from a file into an existing texture,
you should specify the filesystem path to the file, rather
than a URI.</para>
</listitem>
</itemizedlist>
<section>
<title>Synchronous vs. asynchronous image loading</title>
<para>The code examples above show the simplest approach:
loading an image into a texture synchronously. This means that
the application waits for each image to be loaded before continuing;
which is acceptable in this case, but may not be when
loading images into multiple textures.</para>
<para>Another approach is to load data into textures
asynchronously. This requires some extra set up in your code:</para>
<itemizedlist>
<listitem>
<para>Call <function>g_thread_init()</function> (from the
GLib library) prior to calling <function>clutter_init()</function>,
so that a local thread is used to load the file, rather
than the main loop. (Note that this is not necessary if
you're using GLib version >= 2.24, since GObject
initializes threading with the type system.)</para>
</listitem>
<listitem>
<para>Set the texture to load data asynchronously.</para>
</listitem>
<listitem>
<para>Connect a callback to the texture's load-finished
signal to handle any errors which occur during loading,
and/or to do extra work if data loads successfully.</para>
</listitem>
</itemizedlist>
<para>The code below shows how to put these together:</para>
<informalexample>
<programlisting>
<![CDATA[
/* callback to invoke when a texture finishes loading image data */
static void
_load_finished_cb (ClutterTexture *texture,
gpointer error,
gpointer user_data)
{
GError *err = error;
const gchar *image_path = user_data;
if (err != NULL)
g_warning ("Could not load image from file %s; message: %s",
image_path,
err->message);
else
g_debug ("Image loaded from %s", image_path);
}
int
main (int argc, char *argv[])
{
/* initialize GLib's default threading implementation */
g_thread_init (NULL);
clutter_init (&argc, &argv);
/* ... get stage etc. */
ClutterActor *texture;
GError *error = NULL;
texture = clutter_texture_new ();
/* load data asynchronously */
clutter_texture_set_load_async (CLUTTER_TEXTURE (texture), TRUE);
/* connect a callback to the "load-finished" signal */
g_signal_connect (texture,
"load-finished",
G_CALLBACK (_load_finished_cb),
image_path);
/* load the image from a file */
clutter_texture_set_from_file (CLUTTER_TEXTURE (texture),
image_path,
&error);
/* ... clutter_main () etc. */
}
]]>
</programlisting>
</informalexample>
</section>
<section>
<title>Other ways to load image data into a texture</title>
<para>While it's useful to load image data into a texture directly
from a file, there are occasions where you may have image data
in some other (non-file) format:</para>
<itemizedlist>
<listitem>
<para>Various GNOME libraries provide image data in
<type>GdkPixbuf</type> structures; clutter-gtk has
functions for creating or setting a texture from a
<type>GdkPixbuf</type>:
<function>gtk_clutter_texture_new_from_pixbuf()</function>
and <function>gtk_clutter_texture_set_from_pixbuf()</function>
respectively.</para>
</listitem>
<listitem>
<para>If you have raw RGB pixel data, <type>ClutterTexture</type>
also has a <function>clutter_texture_set_from_rgb_data()</function>
function for loading it.</para>
</listitem>
</itemizedlist>
</section>
</section>
</section>
<section id="textures-sub-textures">
<title>Creating sub-textures from an existing texture</title>
<section>
<title>Problem</title>
<para>You want to create a new <type>ClutterTexture</type> that only
displays a rectangular sub-region of an existing texture.</para>
</section>
<section>
<title>Solution</title>
<para>A possible way of achieving this is to retrieve the
<type>CoglHandle</type> of the underlying Cogl texture of the existing
<type>ClutterTexture</type>, create a new handle representing the
sub-region with <function>cogl_texture_new_from_sub_texture()</function>
and finally populate a new <type>ClutterTexture</type> with that handle.
</para>
<informalexample>
<programlisting>
<![CDATA[
/* Create a new ClutterTexture that shows smiley.png */
image = clutter_texture_new_from_file ("smiley.png", NULL);
clutter_actor_get_size (image, &image_width, &image_height);
/* Grab the CoglHandle of the underlying Cogl texture */
texture = clutter_texture_get_cogl_texture (CLUTTER_TEXTURE (image));
/* Create a new Cogl texture from the handle above. That new texture is a
* rectangular region from image, more precisely the north ouest corner
* of the image */
sub_texture = cogl_texture_new_from_sub_texture (texture,
0, 0,
image_width / 2,
image_height / 2);
/* Finally, use the newly created Cogl texture to feed a new ClutterTexture
* and thus create a new actor that displays sub_texture */
sub_image = clutter_texture_new ();
clutter_texture_set_cogl_texture (CLUTTER_TEXTURE (sub_image), sub_texture);
/*
* You could have used the more straightforward g_object_new() function that
* can create an object and set some properties on it at the same time:
* sub_image = g_object_new (CLUTTER_TYPE_TEXTURE,
* "cogl-texture", sub_texture,
* NULL);
*/
]]> </programlisting>
</informalexample>
<screenshot>
<mediaobject>
<imageobject>
<imagedata format="PNG"
fileref="images/textures-sub-texture.png" />
</imageobject>
<alt>
<para>A texture and its sub-texture next to it</para>
</alt>
</mediaobject>
</screenshot>
</section>
<section>
<title>Discussion</title>
<para>The key of this recipe is the Cogl handle that represents the
underlying texture, the actual array of pixels the GPU will use
when it's told to texture geometry.</para>
<para>From this handle, it's possible to create a new texture handle
that represents a rectangular region of the former texture. To do this
one must call <function>cogl_texture_new_from_sub_texture()</function>
with the position and size of the said region. The interesting bit
about this function is that, when drawing either with the original
texture or with the new one, it's still the same GPU resource (pixels)
being used, meaning that creating a sub-texture doesn't use extra GPU
memory.</para>
<para>Once the sub-texture handle is created, the next step is
to create a new actor that will be able to draw it, namely a new
<type>ClutterTexture</type>. You then need to tell the texture to
draw from the sub-texture.</para>
<note><para>The handle you can get from
<function>clutter_texture_get_cogl_texture()</function> is effectively
the same texture than the first layer of the material retrieved by
<function>clutter_texture_get_cogl_material()</function></para></note>
</section>
<section>
<title>Full example</title>
<example id="textures-sub-texture">
<title>Creating a sub-texture from an existing texture</title>
<programlisting
><xi:include href="examples/textures-sub-texture.c" parse="text">
<xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
</xi:include></programlisting>
</example>
</section>
<section>
<title>Going further</title>
<para>Now that we know how to create sub-textures, it's time to make
something a bit more shiny with them. Let's animate them! In case you
have not heard about implicit animations in Clutter yet, it's a good
time to have a look at the animation section of this cookbook.
</para>
<inlinemediaobject>
<videoobject>
<videodata fileref="videos/textures-split-go.ogv"/>
</videoobject>
<alt>
<para>Video showing 4 sub-textures being animated</para>
</alt>
</inlinemediaobject>
<example id="textures-split-go">
<title>Creating a sub-texture from an existing texture</title>
<programlisting
><xi:include href="examples/textures-split-go.c" parse="text">
<xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
</xi:include></programlisting>
</example>
</section>
</section>
<section id="textures-reflection">
<title>Creating a reflection of a texture</title>
<section>
<title>Problem</title>
<para>You want to create the reflection of a texture.</para>
<para>The reflection is going to be positioned below the original
texture, and is going to fade out as if the original was placed on
a glassy surface.</para>
</section>
<section>
<title>Solution</title>
<para>You can use a ClutterClone actor and override its paint
implementation with a custom one:</para>
<informalexample>
<programlisting>
<![CDATA[
static void
_clone_paint_cb (ClutterActor *actor)
{
/* ... */
/* get the Cogl material of the source texture */
material = clutter_texture_get_cogl_material (CLUTTER_TEXTURE (source));
/* get the size of the actor, which will be used to size the reflection */
clutter_actor_get_allocation_box (actor, &box);
clutter_actor_box_get_size (&box, &width, &height);
/* get the composite opacity of the actor */
opacity = clutter_actor_get_paint_opacity (actor);
/* figure out the two colors for the reflection: the first is
* full color and the second is the same, but at 0 opacity
*/
cogl_color_init_from_4f (&color_1, 1.0, 1.0, 1.0, opacity / 255.);
cogl_color_premultiply (&color_1);
cogl_color_init_from_4f (&color_2, 1.0, 1.0, 1.0, 0.0);
cogl_color_premultiply (&color_2);
/* describe the four vertices of the quad; since it has
* to be a reflection, we need to invert it as well
*/
vertices[0].x = 0; vertices[0].y = 0; vertices[0].z = 0;
vertices[0].tx = 0.0; vertices[0].ty = 1.0;
vertices[0].color = color_1;
vertices[1].x = width; vertices[1].y = 0; vertices[1].z = 0;
vertices[1].tx = 1.0; vertices[1].ty = 1.0;
vertices[1].color = color_1;
vertices[2].x = width; vertices[2].y = height; vertices[2].z = 0;
vertices[2].tx = 1.0; vertices[2].ty = 0.0;
vertices[2].color = color_2;
vertices[3].x = 0; vertices[3].y = height; vertices[3].z = 0;
vertices[3].tx = 0.0; vertices[3].ty = 0.0;
vertices[3].color = color_2;
/* paint the same texture but with a different geometry */
cogl_set_source (material);
cogl_polygon (vertices, 4, TRUE);
/* ... */
}
int
main (int argc, char *argv[])
{
clutter_init (&argc, &argv);
/* ... get stage etc. */
ClutterActor *texture;
GError *error = NULL;
texture = clutter_texture_new ();
/* load the image from a file */
clutter_texture_set_from_file (CLUTTER_TEXTURE (texture),
image_path,
&error);
ClutterActor *clone;
clone = clutter_clone_new (texture);
g_signal_connect (clone,
"paint",
G_CALLBACK (_clone_paint_cb),
NULL);
/* ... clutter_main () etc. */
}
]]>
</programlisting>
</informalexample>
<screenshot>
<mediaobject>
<imageobject>
<imagedata format="PNG"
fileref="images/textures-reflection.png" />
</imageobject>
<alt>
<para>A texture and its reflection below</para>
</alt>
</mediaobject>
</screenshot>
</section>
<section>
<title>Discussion</title>
<para>The essence of painting a reflection of a texture lies in reusing
the same material used by the original. This not only allows painting
always an up to date version of the original, but it also saves
resources.</para>
<para>In the code example above we take the <type>CoglMaterial</type>
out of the source <type>ClutterTexture</type> and we ask the Cogl
pipeline to paint it by using <function>cogl_set_source()</function>. The
main difference between this code and the equivalent code inside the
<type>ClutterTexture</type> <function>paint()</function> implementation
is that we also specify the texture vertices and their color by using the
<type>CoglTextureVertex</type> structure and the
<function>cogl_polygon()</function> function.</para>
<para>The <type>CoglTextureVertex</type> structure contains three fields
for the position of the vertex in 3D space:</para>
<informalexample>
<programlisting><![CDATA[
typedef struct _CoglTextureVertex {
float x;
float y;
float z;
...
]]></programlisting>
</informalexample>
<para>It also contains the normalized texture coordinate (also known as
texture element, or <emphasis>texel</emphasis>):</para>
<informalexample>
<programlisting><![CDATA[
...
float tx;
float ty;
...
]]></programlisting>
</informalexample>
<para>And, finally, the color of the vertex, expressed as a
<type>CoglColor</type>:</para>
<informalexample>
<programlisting><![CDATA[
...
CoglColor color;
} CoglTextureVertex;
]]></programlisting>
</informalexample>
<para>The example code sets the position of the vertices in clockwise
order starting from the top left corner, and sets the coordinate of the
texels in counter-clockwise order, starting with the bottom left corner.
This makes sure that the copy of the original texture appears as being
flipped vertically.</para>
<para>The gradual fading out to the background color is done by setting
the color of the top vertices to be fully opaque, and the color of the
bottom ones to be fully transparent; GL will then automatically create a
gradient that will be applied when painting the material.</para>
<note><para>The color values must be pre-multiplied with their alpha
component, otherwise the bleding will not be correct. You can either
multiply the values by yourself when creating the color or, better yet,
use the <function>cogl_color_premultiply()</function> that Cogl provides
for this operation.</para></note>
</section>
<section>
<title>Full example</title>
<example id="textures-reflection-example">
<title>Creating a glassy reflection of a texture</title>
<programlisting>
<xi:include href="examples/textures-reflection.c" parse="text">
<xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
</xi:include>
</programlisting>
</example>
</section>
</section>
<section id="textures-crossfade">
<title>Cross-fading between two images</title>
<section>
<title>Problem</title>
<para>You want to do a cross-fade animation (a.k.a. a dissolve
transition) between two images.</para>
<para>An example use case would be creating a slideshow effect:
load an image from a file, display it in the UI, then load a second
image and cross-fade to it.</para>
</section>
<section>
<title>Solutions</title>
<para>There are two main approaches you could take:</para>
<orderedlist>
<listitem>
<para>Use two <type>ClutterTextures</type>, one on top
of the other.</para>
</listitem>
<listitem>
<para>Use a single <type>ClutterTexture</type>
with the two images in separate layers inside it.</para>
</listitem>
</orderedlist>
<section>
<title>Solution 1: two textures</title>
<para>This approach uses two <type>ClutterTextures</type>,
<varname>bottom</varname> and <varname>top</varname>. To begin
with, the <varname>bottom</varname> texture shows the
<emphasis>source</emphasis> image and is opaque; the
<varname>top</varname> texture is loaded with
the <emphasis>target</emphasis> image, but is not visible as
it is fully transparent.</para>
<para>An animation is then used to fade in the
<varname>top</varname> texture and fade out the
<varname>bottom</varname> texture, leaving just <varname>top</varname>
visible.</para>
<para>To implement this, first create the two textures inside a
<type>ClutterBinLayout</type>:</para>
<informalexample>
<programlisting>
<![CDATA[
/* ... initialise Clutter, get default stage etc. ... */
/* Actors added to this layout are centered on both x and y axes */
ClutterLayoutManager *layout = clutter_bin_layout_new (CLUTTER_BIN_ALIGNMENT_CENTER,
CLUTTER_BIN_ALIGNMENT_CENTER);
ClutterActor *box = clutter_box_new (layout);
/* set the size of the box so it fills the stage (in this case 600x600) */
clutter_actor_set_size (box, 400, 400);
ClutterActor *bottom = clutter_texture_new ();
ClutterActor *top = clutter_texture_new ();
/*
* Add the textures to the layout;
* NB because top is added last, it will be "on top of" bottom
*/
clutter_container_add_actor (CLUTTER_CONTAINER (box), bottom);
clutter_container_add_actor (CLUTTER_CONTAINER (box), top);
/* stage is a ClutterStage instance */
clutter_container_add_actor (CLUTTER_CONTAINER (stage), box);
]]>
</programlisting>
</informalexample>
<para>Load the <varname>source</varname> image into the bottom
texture and the <varname>target</varname> image into the top one.
As this is the same operation each time, it makes sense to write
a function for loading an image into a texture and checking
for errors, e.g.:</para>
<informalexample>
<programlisting>
<![CDATA[
static gboolean
load_image (ClutterTexture *texture,
gchar *image_path)
{
GError *error = NULL;
gboolean success = clutter_texture_set_from_file (CLUTTER_TEXTURE (texture),
image_path,
&error);
if (error != NULL)
{
g_warning ("Error loading %s\n%s", image_path, error->message);
g_error_free (error);
exit (EXIT_FAILURE);
}
return success;
}
]]>
</programlisting>
</informalexample>
<para>The <function>load_image()</function> function can then
be called for each texture:</para>
<informalexample>
<programlisting>
<![CDATA[
/* file path to the image visible when the UI is first displayed */
gchar *source = NULL;
/* file path to the image we're going to cross-fade to */
gchar *target = NULL;
/* ...set image file paths, e.g. from command line or directory read... */
/* the bottom texture contains the source image */
load_image (CLUTTER_TEXTURE (bottom), source);
/* the top texture contains the target image */
load_image (CLUTTER_TEXTURE (top), target);
]]>
</programlisting>
</informalexample>
<para>For the animations, we use <type>ClutterState</type> as we
want to animate two actors at once (<varname>top</varname>
and <varname>bottom</varname>):</para>
<informalexample>
<programlisting>
<![CDATA[
ClutterState *transitions = clutter_state_new ();
/* start state, where bottom is opaque and top is transparent */
clutter_state_set (transitions, NULL, "show-bottom",
top, "opacity", CLUTTER_LINEAR, 0,
bottom, "opacity", CLUTTER_LINEAR, 255,
NULL);
/* end state, where top is opaque and bottom is transparent */
clutter_state_set (transitions, NULL, "show-top",
top, "opacity", CLUTTER_EASE_IN_CUBIC, 255,
bottom, "opacity", CLUTTER_EASE_IN_CUBIC, 0,
NULL);
/* set 1000ms duration for all transitions between states */
clutter_state_set_duration (transitions, NULL, NULL, 1000);
]]>
</programlisting>
</informalexample>
<para>Note that rather than set the start opacities manually
on the actors (e.g. using
<function>clutter_actor_set_opacity()</function>),
I've used a <type>ClutterState</type> to define the start
state (as well as the end state). This makes it easier to
track transitions, as they are all kept in one data structure.</para>
<note>
<para>The easing modes used for the cross-fade animation
(<constant>CLUTTER_EASE_IN_CUBIC</constant>)
can be set to whatever you like. I personally think that
ease-in modes look best for cross-fading.</para>
</note>
<para>"Warp" the two textures into the start state
(<varname>bottom</varname> opaque, <varname>top</varname>
transparent):</para>
<informalexample>
<programlisting>
<![CDATA[
clutter_state_warp_to_state (transitions, "show-bottom");
]]>
</programlisting>
</informalexample>
<para>Using <function>clutter_state_warp_to_state()</function>
immediately transitions to a state without animating, which
in this case sets up the initial state of the UI.</para>
<para>Finally, use the <type>ClutterState</type> to animate
the two textures, so <varname>top</varname> fades in and
<varname>bottom</varname> fades out:</para>
<informalexample>
<programlisting>
<![CDATA[
clutter_state_set_state (transitions, "show-top");
]]>
</programlisting>
</informalexample>
<para>Here's what it looks like:</para>
<inlinemediaobject>
<videoobject>
<videodata fileref="videos/textures-crossfade-two-textures.ogv"/>
</videoobject>
<alt>
<para>Video showing a cross-fade between two textures</para>
</alt>
</inlinemediaobject>
<para>The full code for this example
<link linkend="textures-crossfade-example-1">is in the
appendix</link>.</para>
</section>
<section>
<title>Solution 2: one texture with two layers</title>
<para>The alternative solution is to use a single texture
and the low-level COGL API to set up two different layers
inside it, one for each image.</para>
<para>Then, rather than fade between two textures,
progressively combine the two layers together using an
alpha value which changes over the course of an animation
(from 0.0 at the start of the animation to 1.0 at its end).</para>
<para>At any point in the cross-fade animation, you are
actually seeing a combination of the color
values in the two images (modified by an alpha component), rather
than seeing one image through the other. This can give a smoother
cross-fade effect than the two texture approach.</para>
<para>As this solution is more complex
and relies on the lower-level (and more difficult to follow)
COGL API, the next section is just a short summary of how it
works; see <link linkend="textures-crossfade-example-2">the
sample code, which has liberal comments</link> for more details.</para>
<note>
<para>For more about texture combining, refer to the COGL
API documentation (particularly the section about material
blend strings). You may also find it useful to get hold of
a decent OpenGL reference. (So you can look it up, what we're
doing in this solution is using a texture combiner with
interpolation as the texture combiner function.)</para>
</note>
<section>
<title>Cross-fading using a texture combiner with interpolation</title>
<para>The cross-fade is implemented by combining the two layers,
computing a color value for each pixel in the resulting texture.
The value for each pixel at a given point in the animation
is based on three things:</para>
<orderedlist>
<listitem>
<para>The color value of the <emphasis>source</emphasis>
pixel</para>
</listitem>
<listitem>
<para>The color value of the <emphasis>target</emphasis>
pixel</para>
</listitem>
<listitem>
<para>The alpha value of a third colour at the given point
in the animation's timeline</para>
</listitem>
</orderedlist>
<para>The resulting value for each RGBA color component in each pixel
is computed using an interpolation function. In pseudo-code, it
looks like this:</para>
<informalexample>
<programlisting>
color component value = (target pixel value * alpha) + (source pixel value * (1 - alpha))
</programlisting>
</informalexample>
<para>The effect is that as the alpha increases towards 1.0,
progressively more of the <emphasis>target</emphasis> pixel's
color is used, and progressively less of the <emphasis>source</emphasis>
pixel's: so the <emphasis>target</emphasis> fades in, while
the <emphasis>source</emphasis> fades out.</para>
<para>The advantage of this approach is that color and
brightness transitions only occur where pixels differ between
the two images. This means that you transitions are smoother
where you are cross-fading between images with similar color ranges
and brightness levels.</para>
<para>A special case is where you're cross-fading
from an image to itself: the two texture approach can cause some
dimming during this kind of transition; but the single texture
approach results in no color or brightness changes (it's not even
a transition as such, as all the pixels are identical in
the two layers).</para>
</section>
</section>
</section>
<section id="textures-crossfade-discussion">
<title>Discussion</title>
<section>
<title>Cross-fades between images of different sizes</title>
<para>The code examples
(<link linkend="textures-crossfade-example-1">two textures</link>,
<link linkend="textures-crossfade-example-2">one texture with
COGL</link>) don't take account of the size of the images being
loaded.</para>
<para>In the two texture example, this isn't so much of a problem,
as you can resize the textures individually to the images:
providing you use
<function>clutter_texture_set_keep_aspect_ratio()</function>,
different image sizes shouldn't be a problem. See
<link linkend="textures-crossfade-example-3">the slideshow
example</link>, for a demonstration of how to cycle through
different sized images.</para>
<para>In the case of the single texture approach, you will get
problems when cross-fading between two images with
different sizes. There is no easy way to maintain the aspect
ratio (as you have two layers, potentially with different sizes,
in the same texture). The last layer added to the
<type>CoglMaterial</type> determines the size of the texture;
so if the previous layer has different dimensions, it will
appear distorted in the UI. In the
<link linkend="textures-crossfade-example-2">single texture
code example</link>, the <emphasis>source</emphasis> layer
is added first; so, if the <emphasis>target</emphasis> layer has
different dimensions, the <emphasis>source</emphasis> will
appear distorted.</para>
<para>There are a couple of ways you can remedy this:</para>
<orderedlist>
<listitem>
<para>As you load each image into its own
<type>CoglTexture</type>, get its size with
<function>cogl_texture_get_width()</function> and
<function>cogl_texture_get_height()</function>. Then set the
<type>ClutterTexture's</type> size to the
size of the source layer. Next, as
you cross-fade, simultaneously animate a
size change in the <type>ClutterTexture</type> to
the target image's size.</para>
<para>This could work with non-realistic images where
some distortion of the image is acceptable (the target image
may be the wrong size to start with, but transition to the
correct size by the time it's fully faded in). But it can
look a bit odd for transitions between photos.</para>
</listitem>
<listitem>
<para>Use GdkPixbuf (or similar) to load the images into a temporary
data structure. (GdkPixbuf works well for this as it can resize
the image while retaining its aspect ratio.) Then load the data from
the pixbuf into a <emphasis>region</emphasis> of a
<type>CoglTexture</type> which has the same dimensions as
the <type>ClutterTexture</type>.</para>
<para>Here's an example of how you can rewrite the
<function>load_cogl_texture()</function> function of
the <link linkend="textures-crossfade-example-2">single
texture example</link> to do this:</para>
<informalexample>
<programlisting>
<![CDATA[
/* requires this extra include */
#include <gdk-pixbuf/gdk-pixbuf.h>
static CoglHandle
load_cogl_texture (const char *type,
const char *file,
const guint texture_width,
const guint texture_height)
{
GError *error = NULL;
/*
* Load image data from a file into a GdkPixbuf,
* but constrained to the size of the target ClutterTexture;
* aspect ratio is maintained
*
* texture_width and texture_height are set elsewhere to
* the width and height of the ClutterTexture
*/
GdkPixbuf *pixbuf = gdk_pixbuf_new_from_file_at_size (file,
texture_width,
texture_height,
&error);
if (error != NULL)
{
g_print ("Unable to load %s image: %s\n", type, error->message);
g_error_free (error);
exit (EXIT_FAILURE);
}
guint rowstride = gdk_pixbuf_get_rowstride (pixbuf);
guint width = gdk_pixbuf_get_width (pixbuf);
guint height = gdk_pixbuf_get_height (pixbuf);
guchar *data = gdk_pixbuf_get_pixels (pixbuf);
CoglPixelFormat format = COGL_PIXEL_FORMAT_RGB_888;
if (gdk_pixbuf_get_has_alpha (pixbuf) == TRUE)
format = COGL_PIXEL_FORMAT_RGBA_8888;
/* CoglTexture with the same dimensions as the ClutterTexture */
CoglHandle *tex = cogl_texture_new_with_size (texture_width,
texture_height,
COGL_TEXTURE_NO_SLICING,
format);
/*
* load the texture data into a region of the full-sized texture;
* the size of the region is set from the size of the image data
* (as resized by GdkPixbuf)
*/
cogl_texture_set_region (tex,
0, 0, /* from top-left corner of the pixbuf */
(texture_width - width) / 2, /* center on the CoglTexture */
(texture_height - height) / 2, /* center on the CoglTexture */
width, height,
width, height,
format,
rowstride,
data);
return tex;
}
]]>
</programlisting>
</informalexample>
<para>Because you're copying the image data from the
file into a region of the <type>CoglTexture</type>
that's the same size as the image data in the pixbuf, it isn't
distorted.</para>
</listitem>
</orderedlist>
</section>
<section id="textures-crossfade-discussion-slideshows">
<title>Slideshows</title>
<para>The two texture solution can be easily extended
to cycle through multiple images. To begin with, the first
image is loaded into the <varname>top</varname> texture. Then,
the basic pattern for transitioning to the next image is as follows:</para>
<itemizedlist>
<listitem>
<para>Copy the data from the <varname>top</varname> texture
to the <varname>bottom</varname> texture.</para>
</listitem>
<listitem>
<para>Make the <varname>top</varname> texture transparent
and the <varname>bottom</varname> texture opaque (using
<function>clutter_state_warp_to_state()</function>). At this
point, it appears as though the textures haven't changed.</para>
</listitem>
<listitem>
<para>Load the next image into <varname>top</varname>.</para>
</listitem>
<listitem>
<para>When <varname>top</varname> has finished loading,
fade it in while simultaneously fading out
<varname>bottom</varname> (using
<function>clutter_state_set_state()</function>).</para>
</listitem>
</itemizedlist>
<para>The <link linkend="textures-crossfade-example-3">sample
code in the appendix</link> implements this as part of
a simple slideshow application.</para>
</section>
</section>
<section>
<title>Full examples</title>
<example id="textures-crossfade-example-1">
<title>Cross-fading between two images using two
<type>ClutterTextures</type></title>
<programlisting>
<xi:include href="examples/textures-crossfade.c" parse="text">
<xi:fallback>there should be a code sample here, but there isn't...</xi:fallback>
</xi:include>
</programlisting>
</example>
<example id="textures-crossfade-example-2">
<title>Cross-fading between two images using one
<type>ClutterTexture</type> and the COGL API</title>
<programlisting>
<xi:include href="examples/textures-crossfade-cogl.c" parse="text">
<xi:fallback>there should be a code sample here, but there isn't...</xi:fallback>
</xi:include>
</programlisting>
</example>
<example id="textures-crossfade-example-3">
<title>A simple slideshow application using two
<type>ClutterTextures</type></title>
<programlisting>
<xi:include href="examples/textures-crossfade-slideshow.c" parse="text">
<xi:fallback>there should be a code sample here, but there isn't...</xi:fallback>
</xi:include>
</programlisting>
</example>
</section>
</section>
</chapter>
Reference in New Issue View Git Blame Copy Permalink