Clutter 1.15.2 2013-07-10 =============================================================================== • List of changes since Clutter 1.14 - Improve state tracking and short circuiting ClutterActor now tracks clones and unmapped actors more aggressively, to reduce the amount of work necessary when updating the scene graph. - Wayland backend improvements and updates - Documentation updates Clean up the API reference for readability, and improve the comments in the inlined example code. Also, include the cookbook in the distribution tarball. - Allow installation of conformance tests Clutter now allows installing its conformance tests into a well-known location; this allows running the conformance test suite against an installed version of Clutter. - Add ClutterFlowLayout:snap-to-grid ClutterFlowLayout users can now ask the layout manager to not align the actors to a grid. - Improve gesture recognizers - Deprecations ClutterText::cursor-event has been replaced by ClutterText::cursor-changed; ClutterGeometry has been deprecated; ClutterActor::realize and ::unrealize, along with their virtual functions, have been deprecated. • List of bugs fixed since Clutter 1.14 #682789 - Deprecate ClutterGeometry (and remove it for 2.0) #698668 - A few improvements to ClutterGestureAction #698669 - Fix "trigger edge after" behavior with more than 1 touch point #698671 - Refactor event handling code in ClutterGestureAction #698674 - Improve ClutterZoomAction behavior #698783 - Add a paint callback for ClutterStage #698766 - Implicit transitions queued on invisible actors should be ignored #648873 - Feature request: ClutterFlowLayout not aligning on a grid #699675 - Offscreen effects allocating too much memory #692706 - Frequent crash in cally_stage_notify_key_focus_cb #701974 - x11: trap errors when calling XIQueryDevice #696813 - clutter_actor_set_child_above/below_sibling leaking a reference on the actor #701208 - deform-effect: correctly set the cull-face mode of the back pipeline #700980 - Tap action now longer works #702016 - ClutterText reset font when dpi changes and font was set using a pango description #702610 - text: relayout on cursor visibility change #702941 - Install conformance tests RH#975171 - gnome-shell: screen magnifier can cause crash with Cogl error #702202 - conform tests hang on wayland #703188 - Stage doesn't appear when running under Wayland #703476 - tests/actor-offscreen-redirect: Fix race condition #703566 - Need to be able to share Wayland display between GTK and Clutter #697285 - Inconsistent setting of the time member on the events #703882 - Prevent buffer/text/max-length properties notification in the allocation cycle Many thanks to: Lionel Landwerlin, Chris Cummins, Matthias Clasen, Rob Bradford, Alejandro Piñeiro, Jasper St. Pierre, Bastian Winkler, Colin Walters, Craig R. Hughes, Daniel Mustieles, Marek Černocký, Adel Gadllah, Ask H. Larsen, Bastien Nocera, Cosimo Cecchi, Dimitris Spingos, Duarte Loreto, Emanuele Aina, Fran Diéguez, Gil Forcada, Matej Urbančič, Milo Casagrande, Neil Roberts, Rui Matos, Samuel Degrande, Sebastian Keller, Sjoerd Simons. Clutter 1.13.2 2012-12-18 =============================================================================== • List of changes since Clutter 1.12 - Add ClutterTapAction, a gesture recogniser for single touch taps. - Add ClutterSwipeAction::swipe This new signal has a boolean return value, and brings the SwipeAction in line with the rest of the GestureAction sub-classes. The ::swept signal has also been deprecated. - Enable XInput 2.x support by default Instead of using Xlib core events. The clutter_x11_enable_xinput() function now does not do anything; it's possible to disable XInput support by using the CLUTTER_DISABLE_XINPUT environment variable. - Documentation fixes • List of bugs fixed since 1.12 #679439 - Single-threaded clutter programs fail on platforms which don't permit unlocking an already unlocked mutex #685589 - Off-stage touch events are not delivered #685554 - Assertion failure when trying to cancel an already started gesture #685028 - Let users and subclasses set a custom threshold on GestureAction #685221 - Points get stuck in th tracking array when returning FALSE from ::gesture-progress #683948 - Add TapAction as subclass of GestureAction to deprecate ClickAction #685737 - Export the last event for each touch point on GestureAction #686776 - Shouldn't annotate constructor of GInitiallyUnowned subclasses #689073 - Fix clutter_actor_allocate_align_fill() with actors exactly between 2 pixels #685186 - tests: Print touch sequences in test-events #689258 - xi2: Reset the correct scroll axes on DeviceChanged #689061 - Some fixes and API additions for ClutterPanAction #689316 - Strange issues with margins #689399 - text: Prevent a relayout if font descriptions or attrs are equal #689496 - Fixes for Coverity #690214 - clutter_actor_apply_transform() fails to rollback the pivot translation if an explicit transform has been set #673838 - Enable XInput support by default #686692 - Clutter 1.12.2 compilation fails in evdev backend #685982 - ClutterActor::transitions-completed isn't called for implicit transitions #688457 - clutter_get_current_event() returns NULL on TOUCH_BEGIN #689392 - swipe-action: Introduce new ::swipe signal Many thanks to: Emanuele Aina, Jasper St. Pierre, Emmanuele Bassi, Daniel Stone, Chun-wei Fan, Rob Bradford, Tomeu Vizoso, Wolfgang Stöggl, Alejandro Piñeiro, Christian Kirbach, Guillaume Desmottes, Lionel Landwerlin, Marek Černocký, Milo Casagrande, Nishio Futoshi, OKANO Takayoshi, Piotr Drąg, Rūdolfs Mazurs, Tristan Van Berkom. Clutter 1.12.0 2012-09-24 =============================================================================== • List of changes since Clutter 1.11.16 - Fix the device tracking for core X11 pointers If a master input device can emit both touch and pointer events we end up in an inconsistent state; we should account for this case when tracking the stage that contains the events of each input device. - Respect text direction in BinLayout The text direction of the children of an actor using the BinLayout layout manager should be taken into account, both when using the Actor's align flags and when using the legacy BinAlignment flags. - Translations updates Hindi, Telugu, Catalan, Malayalam, Japanese, Bulgarian, Kannada. • List of bugs fixed since Clutter 1.11.16 #684214 - messageTray: Fix summary position in RTL locales #684552 - Track coordinates and device ids in test-events #684530 - Print device number in debug messages from input-device #684509 - Mouse events lost after touch event from virtual core pointer Many thanks to: Emanuele Aina, Emmanuele Bassi, Alexander Shopov, Ani Peter, Carles Ferrando, Chandan Kumar, Gil Forcada, Krishnababu Krothapalli, Nishio Futoshi, Shankar Prasad. Clutter 1.11.16 2012-09-17 =============================================================================== • List of changes since Clutter 1.11.14 - Fixes for gesture-based actions Ensure that the ClutterPanAction::pan-stopped signal is emitted before the ClutterGestureAction::gesture-begin signal, in case a new gesture starts; this requires adding a new state to ClutterGestureAction, the gesture-prepare state. - Ensure modified Enter keys do not end up in the Text buffer For single-line ClutterText actors. - Add touch event support to ClutterClickAction - Updated translations British English, Indonesian, Traditional Chinese (Hong Kong and Taiwan), French, Serbian, Russian, German, Slovenian, Brazilian Portuguese, Greek, Portuguese, Belarusian, Assamese, Danish. • List of bugs fixed since Clutter 1.11.14 #683301 - stage: Normalize key focus setting #683430 - CLUTTER_GESTURE_ACTION_GET_CLASS() calls G_TYPE_INSTANCE_GET_PRIVATE() instead of G_TYPE_INSTANCE_GET_CLASS() #683431 - PanAction::pan-stopped sometimes is emitted before ::gesture-begin #683471 - All gestures get cancelled after missing a button release event #682161 - ClutterImage overflows beyond its actor's allocation #623344 - Search incorrectly handles input #683869 - test-events does not track touch events #683870 - test-events only reports up/down scrolls #683936 - ClickAction doesn't support touch events #683937 - Wrong format identifiers in debug messages in clutter_stage_allocate() Many thanks to: Emanuele Aina, Emmanuele Bassi, Alexandre Franke, Ask H. Larsen, Bruce Cowan, Chao-Hsiung Liao, Christian Kirbach, Debarshi Ray, Dirgita, Duarte Loreto, Enrico Nicoletto, Ihar Hrachyshka, Jasper St. Pierre, Martin Srebotnjak, Matej Urbančič, Nilamdyuti Goswami, Rui Matos, Tom Tryfonidis, Yuri Myasoedov, Мирослав Николић. Clutter 1.11.14 2012-09-03 =============================================================================== • List of changes since Clutter 1.11.12 - Fixes for the touch sequence handling The stage associated with an input device is now set when a touch sequence begins, and cleared when the last touch sequence ends. - Add interpolation for matrices Using the CSS3 Transforms specification for decomposing matrices and interpolating the resulting transformations. This allows animating properties like ClutterActor:transform and ClutterActor:child-transform. - Add ClutterPanAction The PanAction is a gesture recogniser that allows panning children of a "scrollable" viewport. - Add more accessors to GestureAction for its subclasses GestureAction now allows retrieving the velocity and delta of pointer, as well as the event sequences and devices involved in the gesture. This allows writing more complex gesture recognisers. It is also possible, now, to ask a GestureAction to cancel the current gesture programmatically, e.g. from a timer. - Fix ClutterTableLayout.pack() with negative row/column Using a negative number to appen an actor into a TableLayout was causing additional rows and columns to be appended, due to an off by one error. - Fix press coordinates when using ClutterDragAction with a drag handle The transformation of the coordinates is now done using the drag actor, as it was supposed to be. - Documentation and annotation fixes - Deprecate the ClutterActor::pick signal Similarly to the ClutterActor::paint signal, it's now discouraged to connect to the ClutterActor::pick signal; connecting to the pick signal will raise a warning when using the CLUTTER_ENABLE_DIAGNOSTIC environment variable. - Updated translations Lithuanian, Indonesian, Traditional Chinese (Hong Kong and Taiwan), Polish, Spanish, Assamese, Greek, Spanish, Polish, Galician, Belarusian. • List of bugs fixed since Clutter 1.11.12 #682795 - Annotation problem for clutter_actor_iter_next() and clutter_actor_iter_prev() #682754 - ClutterRotateAction wrong marshaller usage #681746 - Drag handle misplacemente in examples/drag-action #679990 - clutter_table_layout_pack increments column/row count by two #681648 - add Pan action #683219 - Build failure with old (?) XI2 #683066 - brightness-contrast-effect: Don't actually run if it will have no effect #683090 - gesture-action: Add API for cancelling a gesture #683126 - Remove tracking of input devices and sequences from the stage #682362 - Multi touch events skipped #683113 - Bug in ClutterGestureAction documentation #680255 - The middle and right mouse buttons are swapped when using the evdev backend Many thanks to: Emanuele Aina Piotr Drąg, Lionel Landwerlin, Aurimas Černius, Daniel Mustieles, Jasper St. Pierre, Neil Roberts, Nilamdyuti Goswami, Tomeu Vizoso, Andika Triwidada, Andre Kuehne, Chao-Hsiung Liao, Chun-wei Fan, Fran Diéguez, Ihar Hrachyshka, Tom Tryfonidis. Clutter 1.11.12 2012-08-20 =============================================================================== • List of changes since Clutter 1.11.10 - ClutterBinLayout honours the fixed-position of actors The ClutterBinLayout now checks if the :fixed-position-set property of a ClutterActor is set, and will use the fixed position when computing the allocation, without requiring an explicit CLUTTER_BIN_ALIGNMENT_FIXED alignment policy. - Soft-deprecation of ClutterGeometry The ClutterGeometry boxed type is a bad rectangle type, with known issues when used for unioning and intersecting; Clutter uses the type in signals and properties, so we cannot fully deprecate it. The documentation has been amended, and API using ClutterGeometry has been deprecated where it makes sense. - Deprecate the ClutterActor::paint signal The class handler for ClutterActor::paint is still available, but connecting to the ::paint signal directly is strongly discouraged, and will emit warnings if the CLUTTER_ENABLE_DIAGNOSTIC environment variable is set. Notifications of a full paint for the Stage should happen only through the repaint functions. - Ensure we associate input devices to the stage on touch events Like we do for crossing events for pointer devices, beginning and ending a touch sequence should associate the input device to the stage. - Allow constraining a DragAction to an area Similarly to how we allow constraining the dragging to an axis, we can also constrain the dragging to a specific area, expressed in parent-relative coordinates. - Do not handle events on ClutterText if :selectable is FALSE If the ClutterText:selectable property is FALSE we should only reposition the cursor, and avoid the whole drag-to-select event handling. - Add ClutterActor:child-transform The :child-transform property allows applying an initial transformation to the children of an actor, but not to the actor itself. - Fix height-for-width policy in ClutterBinLayout - Add ClutterZoomAction An action that implements the pinch gesture to scale an actor up or down through two touch points. - Documentation fixes - Translations update Assamese, Indonesian, Ukranian, Traditional Chinese translation (Hong Kong and Taiwan), Spanish, Galician, Serbian. • List of bugs fixed since Clutter 1.11.10 [bugzilla.gnome.org] #681584 - clutter touch events tests slows down a lot after some use #681074 - Call clutter_input_device_update_from_event from clutter_x11_handle_event #681168 - ClutterDragAction: allow constraining the movement of the dragged actor #682070 - clutter-text: Make sure to paint the background of a text actor #682265 - ClutterBinLayout not honoring ClutterActor position set through clutter_actor_set_position #679483 - ClutterBoxLayout does not do height-for-width properly #678427 - Zoom action #681814 - ClutterDragAction causes crashes when drag actor is destroyed at drag-end time Many thanks to: Nilamdyuti Goswami, Daniel Mustieles, Fran Diéguez, Chao-Hsiung Liao, Daniel Korostil, Dirgita, Duarte Loreto, Giovanni Campagna, Jasper St. Pierre, Lionel Landwerlin, Sjoerd Simons, Tristan Van Berkom, Мирослав Николић. Clutter 1.11.10 2012-08-07 =============================================================================== • List of changes since Clutter 1.11.8 - Add support for multiple touch points in GestureAction GestureAction subclasses can now define the number of touch points they require in order to start recognising a gesture. - Add a RotateAction A GestureAction subclass that requires two touch points to rotate the actor to which it has been applied. - Generate crossing events for touch devices - Respect ClutterStage.set_motion_events_enabled() for touch events - Fix a regression in discrete scroll events emission When using XInput 2, the scroll events generated through buttons (e.g. mouse wheel) should only be emitted on ButtonPress, to match the semantics of the X11 core device handling. - Add progress functions defined in CSS3-Transitions The CSS3 Transitions specification defines various timing functions: steps cubic-bezier step-start ease step-end ease-in ease-out ease-in-out These are now available to be used with ClutterTimeline. - Add ClutterActor::transition-stopped The ::transition-stopped signal is emitted each time a Transition associated to an actor is stopped (using the same sematincs as the ClutterTimeline::stopped signal); it is also a detailed signal, so that it's possible to connect a handler for a specific Transition name. - Add ClutterActor.transform The :transform property allows overriding all the decomposed transformations of an actor, like scale and rotate; the transformation is applied relative to the actor's allocated origin and pivot point. - Documentation and build fixes - Translations update Traditional Chinese (Hong Kong and Taiwan), Spanish, Galician, Serbian, Greek. • List of bugs fixed since Clutter 1.11.8 [bugzilla.gnome.org] #678586 - Modifiy ClutterGestureAction to support multi touch and multiple points #680088 - Duplicate mouse wheel scroll events with xinput enabled #678587 - Add ClutterRotationAction #679797 - Missing enter/leave events generation for touch events #680174 - Add clutter_event_is_pointer_emulated() to distinguish emulated scroll events #680751 - clutter_stage_set_motion_events_enabled() is not honoured with CLUTTER_TOUCH_UPDATE events #680752 - Touch cancel events are not processed by Clutter Many thanks to: Lionel Landwerlin, Chao-Hsiung Liao, Tom Tryfonidis, Мирослав Николић, Daniel Mustieles, Emanuele Aina, Fran Diéguez, Piotr Drąg. Clutter 1.11.8 2012-07-16 =============================================================================== • List of changes since Clutter 1.11.6 - Bump the dependency of ATK Use the newly released 2.5.3 to rely on the generci event listeners that have been added to ATK; this avoids reimplementing our own. - Ensure validity of iterators Even when they are copied. - Rounding error fixes for allocations Constraints and other code adjusting the allocation of an actor should round the origin and size of the ClutterActorBox in a consistent way. - Updates for the VisualStudio build files - Add ClutterDragAction::drag-progress The ::drag-progress signal allows controlling the emission of the ::drag-motion signal. Overriding the default behaviour of a DragAction is now possible without calling g_signal_stop_emission_by_name(). - Add ClutterActor:pivot-point The pivot point of ClutterActor provides a center, in normalized coordinate space, for the transformations of an actor (scaling, rotation, translation). - Deprecations ClutterText:position has been deprecated by ClutterText:cursor-position, for consistency with other ClutterText properties, as well as to avoid shadowing the ClutterActor:position property. ClutterActor:depth has been deprecated by ClutterActor:z-position. ClutterTexture has been deprecated in favour of ClutterImage. ClutterActor:anchor-[xy] and the transformation centers for rotation and scaling have been deprecated in favour of the ClutterActor:pivot-point. The clutter_threads_enter() and clutter_threads_leave() functions have been deprecated. - Removal of the experimental ClutterLayoutManager easing state API The easing state API for ClutterLayoutManager was added in 1.11.2, but with the introduction of a default easing state for ClutterActor it is now redundant and not necessary; to animate the allocation of an actor during layout it's simply necessary to set its easing state. All layout managers provided by Clutter have been updated. • List of bugs fixed since Clutter 1.11.6 [bugzilla.gnome.org] #679451 - Add ::drag-progress signal #679457 - Add :cursor-position and deprecate :position #679465 - Add :z-position and deprecate :depth #677853 - Use a single transformation center for rotation and scaling Many thanks to: Chun-wei Fan, Alejandro Piñeiro, Alexander Shopov, Andika Triwidada, Chao-Hsiung Liao, Daniel Mustieles, Fran Diéguez, Ihar Hrachyshka, Kjartan Maraas, Piotr Drąg, Sasi Bhushan Boddepalli. Clutter 1.11.6 2012-06-23 =============================================================================== • List of changes since Clutter 1.11.4 - Accessibility fixes Clean up key listeners; implement AtkText missing methods for getting text before and after a given offset. - Ensure that ClutterBinLayout honours the fixed positioning - Improvements in GridLayout - Improve debugging messages We now print out the name, type, and pointer address of each actor when emitting debugging messages; also, all messages within one second are grouped together and show the delta instead of a full timestamp, to improve readability. - Add ClutterActor:content-repeat The content-repeat property can be used by a ClutterContent implementation to control the repeating of the content's data or pattern. ClutterImage and ClutterCanvas honour this property. - Explicit animation API improvements ClutterTransition will now ask the ClutterAnimatable associated to it for its initial or final state, in case either is missing; also, the interpolated value will be coerced to the correct property type instead of generating a warning. - Switch to lcov for test coverage - Remove an extra reference on ClutterStage The reference added during dispose introduced a leak in case a stage was destroyed. - Improve touch event support New API to install a grab on a specific event sequence of an input device; ClutterText now responds to touch events; ClutterDragAction and ClutterDropAction also use touch events as well as pointer events. The conformance and interactive test suites now have units for checking touch event handling. • List of bugs fixed since Clutter 1.11.4 #677659 - add user_data parameter to ClutterBindingActionFunc #677778 - Assorted introspection fixes from Vala #677921 - tests: link test-conformance against libm #675183 - Duplicate accessible key events #678391 - tests: no return in non-void function #678423 - 1.10.8 needs fix on osx ... clutter_x11_enable_xinput not available #678439 - crash in event translation #678264 - actor: Make margin properties animatable #677221 - Orca does not present run dialog text #678047 - Add touch events vfunc on ClutterActor #678049 - Add touch events support to Drag & Drop actions #678279 - Add grab API on touch sequences #678278 - Add touch events support to ClutterText Many thanks to: Alejandro Piñeiro, Alexander Larsson, Lionel Landwerlin, Bastian Winkler, Tomeu Vizoso, Evan Nemerson, Andy Wingo, Daniel Mustieles, Danielle Madeley, Dimitris Spingos, Fran Diéguez, Frédéric Péters, Ihar Hrachyshka, Jasper St. Pierre, Matthias Clasen, Sasi Bhushan Boddepalli, Tom Tryfonidis Clutter 1.11.4 2012-06-05 =============================================================================== • List of changes since Clutter 1.11.2 - Multi-touch support fixes The clutter_event_copy() code was copying the wrong axis data; the correct touch device was not used when translating axis data from XInput2 to the ClutterInputDevice; touch events were not delivered to the correct actors. - Add ClutterDropAction::drop-cancel signal The ::drop-cancel does what it says on the tin: it allows handling a cancelled drop action, instead of relying on the drag end signal on the ClutterDragAction. - Add examples in the repository Clutter has been using some interactive tests as examples of idiomatic usage, both as standalone code and for inclusion inside the API reference documentation; this is sub-optimal, as the interactive tests are meant to exercise the API and its behaviour, not as an example of how to write proper Clutter code. For this reason, we now have an examples/ directory that contains example code that can be used to learn Clutter. - Allow disabling the tests and examples when building Clutter This should help cross-compilation and testing. - Fix the preferred size to always include the actor's margin - Fix picking of the ClutterScrollActor - Add implicit animations for the color properties of ClutterText Changing any color-related properties of a ClutterText actor will result in a transition, if the easing state has a non-zero duration. - Layout managers should respect the child expand and align properties ClutterBinLayout, ClutterBoxLayout, and ClutterTableLayout should use the ClutterActor [xy]-expand and [xy]-align properties, and deprecate their own. - Make all layout managers respect the child easing state when allocating ClutterLayoutManager also has properties that can be set to control all the children's default easing state. - Add ClutterTimeline::stopped signal The ::stopped signal is emitted either when a Timeline reaches full completion, including eventual repeats; or when the Timeline has been stopped through clutter_timeline_stop(). A boolean argument passed to the signal handlers should be used to distinguish the two cases. - Add ClutterGridLayout This layout manager implements the same layout policy of GtkGrid. - Fixes for ClutterKeyframeTransition - Documentation fixes - Fixes for building Clutter with Visual Studio Including the GDK backend. - Fixes for the Mac backend Chain up to get a Cogl context after creating a GL context; this seems to be enough to make the interactive tests run. • List of bugs fixed since Clutter 1.11.2 [bugzilla.gnome.org] #675336 - ClutterDropAction needs a ::drop-cancel signal #675371 - Asserts when getting touch events #676088 - Fixing picking in scroll-actor "breaks" gnome-control-center #676032 - keyframe-transition: Documentation fixes #676031 - keyframe-transition: Create a new interval if necessary #676158 - table-layout: Remove unused animation helpers #676334 - scroll-actor: Fix ->transition not being reset #675890 - Passing NULL buffer to clutter_text_set_text() will not reset the buffer and segfault #676367 - actor: Add a custom scriptable "margin" property #676068 - Setting size on ClutterFlowLayout container crashes #676963 - text: Enable implicit color animations #675396 - Possible bug in _clutter_paint_volume_axis_align #674365 - Race during parallel build in tests/interactive/ #676827 - layout-manager: Add a new animation API #677085 - examples: Allow optional animations in flow-layout #677086 - box-layout: Remove unused BoxChild members #677098 - Ensure we stop transitions on remove_child() #676854 - timeline: Add a new "finished" signal #677039 - Wrong allocation for WIDTH_FOR_HEIGHT actors #675998 - Example 4.2 mixes up height and width #677384 - doc: Add ClutterLayoutManagerPrivate to doc sections #677284 - table-layout: Honor actors expand and alignment settings #677283 - box-layout: Honor actor expand and alignment #677372 - Add ClutterGridLayout #677390 - events: Deliver touch events to actors Many thanks to: Bastian Winkler, Chun-wei Fan, Bastien Nocera, Daniel Mustieles, Fran Diéguez, Tomeu Vizoso, Tristan Van Berkom, Alexander Larsson, Alexandre Franke, Bruno Brouard, Debarshi Ray, Dominique Bureau, Emanuele Aina, Matej Urbančič, Mike Ruprecht, Piotr Drąg Clutter 1.11.2 2012-04-30 =============================================================================== • List of changes since Clutter 1.10 - Add ClutterScrollActor An actor that can display a portion of its children, as well as transitioning between visible regions. - Make clutter_actor_allocate() respect the easing state of the actor This allows animating allocations in layout managers. - Add automatic expansion flags for ClutterActor Actors can be marked to by allocated extra space by their parent, or by the layout manager used by their parent; the expansion flags are also recursive, so they can be set on a leaf node of the actor tree, and propagate further up automatically. - Add ClutterTransitionGroup and ClutterKeyframeTransition Two ClutterTransition implementation that allow creating complex transitions. - Provide more C convenience API to ClutterTransition Instead of dealing with ClutterInterval instances, it's possible to define the starting and final values of a transition. - Provide base geometric types: point, size, rectangle Along with commodity API. - New round of deprecations ClutterMedia, ClutterCairoTexture, clutter_actor_animate(), ClutterAnimation, ClutterAnimator, ClutterState, ClutterLayoutManager's animation API. - Return a valid default PaintVolume in more cases For actors not overriding paint() or get_paint_volume() we can already infer enough information on the area thatis going to be painted, and return a valid paint volume. We specifically ignore any painting going on inside a ClutterActor::paint signal handler, as that is considered legacy and on its way to deprecation. People overriding the paint sequence of an actor from within a paint signal handler, and painting outside the allocation, are evil anyway. - Depend on Pango 1.30 - Report distance as an axis on X11 with XInput 2 support enabled Proximity information with XInput 2+ is reported as axis data on devices with valuator classes. - Documentation fixes • List of bugs fixed since Clutter 1.10 #674510 - Changing a hidden child's position with new API shows the actor #672994 - Orca sometimes presents previously-entered text in GNOME Shell Alt+F2 dialog #652521 - get_length fails in Clutter.Path when length is greater than 46340 #673644 - Scroll not working in document overview Many thanks to: Jasper St. Pierre, Neil Roberts, Robert Bragg, Cosimo Cecchi, Rob Bradford, Jonh Wendell, Piotr Drąg, Rico Tzschichholz, Alejandro Piñeiro, Carles Ferrando, Christian Kirbach, Daniel Korostil, Daniel Mustieles, Daniel Nylander, Fran Diéguez, Ihar Hrachyshka, Jordi Serratosa, Kenneth Nielsen, Owen W. Taylor, Peter Hutterer, Rajesh Ranjan, Rudolfs Mazurs, Stefano Facchini, Tristan Van Berkom, Viktor Nyberg, Yuri Myasoedov, kkrothap@redhat.com. Clutter 1.9.16 2012-03-19 =============================================================================== • Clutter 1.10.0, release-candidate 1 • List of changes since Clutter 1.9.14 - Support implicit animatable properties Various properties of ClutterActor can now be implicitly animated when using the public setters, instead of going through the animation API; this is an opt-in mechanism for the 1.x API series. - Introduce paint nodes ClutterPaintNode is an element of the render tree; it is used to store the pipeline state and the geometry to be drawn. Actors have the ability to be painted using the paint nodes by overriding the paint_node() virtual function instead of the paint() virtual function. For the 1.x API series the render tree will be consumed per-actor, but the plan is to build a full tree as the authoritative source for the 2.x API series. - Support Content delegates ClutterContent is an interface that allows creating classes that will painted in place of an actor's paint() virtual function. Clutter provides two content types: Canvas, a Cairo-based immediate canvas for drawing the contents of an actor; and Image, a content that will paint image data. - ClutterText improvements The caret of editable text actors is now centered, and the background color will be respected when painting the actor. - Support for the XInput 2.2 extension Clutter will now relay touch events coming from the X server, as well as precise scrolling delta, for devices with those two capabilities. The support is still experimental, and limited to the X11 platform for the time being. - Translation updates Slovenian, Assamese, Bulgarian, Spanish, Galician, Belarusian, Traditional Chinese (Hong Kong and Taiwan), British English, Hebrew, Polish, Catalan, Khmer, Russian, Finnish, Odia, Brazilian Portuguese, Danish, Lithuanian, Portuguese, Czech, Swedish, French. • List of bugs fixes since Clutter 1.9.14 [bugzilla.gnome.org] #655491 - Text cursor/caret theming #668801 - [NSApp finishLaunching]; missing in OSX backend #656156 - Add lightness, brightness, and contrast effects #671736 - Provide translations for "default:LTR" for RTL locales #671779 - gdk: add new device types (GDK_SOURCE_TOUCHSCREEN, GDK_SOURCE_TOUCHPAD) #672316 - Flickering/redraw issues in multi stage Many thanks to: Piotr Drąg, Chun-wei Fan, Daniel Mustieles, Fran Diéguez, Matej Urbančič, Nilamdyuti Goswami, Alexander Shopov, Bruce Cowan, Florian Müllner, Gil Forcada, Ihar Hrachyshka, Stefano Facchini, Мирослав Николић, Adam Matoušek, Antonio Fernandes C. Neto, Aurimas Černius, Bruno Brouard, Carles Ferrando, Chao-Hsiung Liao, Daniel Nylander, Duarte Loreto, Jasper St. Pierre, Joseph Scheuhammer, Kenneth Nielsen, Khoem Sokhem, Lionel Landwerlin, ManojKumar Giri, Marek Černocký, Timo Jyrinki, Tristan Van Berkom, Yuri Myasoedov Clutter 1.9.14 2012-03-05 =============================================================================== • List of changes since Clutter 1.9.12 - Support custom versioning boundaries for the API Now that GLib provides macros for changing the minimum required and maximum allowed version of a library, Clutter can respect the boundaries expressed using CLUTTER_VERSION_MIN_REQUIRED and CLUTTER_VERSION_MAX_ALLOWED. - Add version information to deprecations - Move all deprecated symbols to separate header files - Documentation and annotation fixes. - Accessibility fixes in Cally Do not use ClutterActor:name as the accessible name, and do not provide the extents of an accessible object if the actor to which it refers is not on screen. - Updates to the Wayland compositor and client support Clutter now allows being used for creating hybrid Wayland/X11 compositors, working with KMS and evdev directly. - Translation updates: Bulgarian, Ukranian, Galician, Uyghur, Belarusian, Brazilian Portuguese, Telugu, Slovenian, Assamese, Serbian. • List of bug fixes since Clutter 1.9.12 [bugzilla.gnome.org] #670680 - "make check" assumes gdk backend will be built Many thanks to: Robert Bragg, Neil Roberts, Alejandro Piñeiro, Chun-wei Fan, Alexander Shopov, Daniel Korostil, Daniel Mustieles, Fran Diéguez, Gheyret Kenji, Giovanni Campagna, Ihar Hrachyshka, Jonh Wendell, Krishnababu Krothapalli, Matej Urbančič, Nilamdyuti Goswami, Мирослав Николић Clutter 1.9.12 2012-02-23 =============================================================================== • List of changes since Clutter 1.9.10 - Add ClutterTimeline:repeat-count and deprecate :loop The :repeat-count property supercedes the :loop property, and it provides a way to specify the number of repeats that a timeline should perform - with the option of specifying an "infinity" value. - Add a progress mode for ClutterTimeline This begins the "soft deprecation" of ClutterAlpha. Instead of requiring a full object to compute an easing function out of a linear progress coming from ClutterTimeline, we should have this functionality on ClutterTimeline itself. Since ClutterAlpha is still exposed in API that we cannot deprecate (such as virtual functions) we cannot deprecate it fully, and we'll have to wait until the 2.0 API bump to get rid of it. - Fix ClutterBoxLayout allocation Since the update of the box layout algorithm there have been a bunch of regressions; now the layout works as intended. - Improve the performance of the shader-based effect in Clutter The effects shipped with Clutter now use the CoglSnippet API internally, which allows efficient generation of the shader code; they also ensure that the shader is generated once per class, and shared across instances. These changes should improve performance when using effects provided by Clutter. - Update the internal usage of Cogl API Clutter should strive to use the Cogl 2.0 API internally and not mix the 1.0 and 2.0 API. - Allow accessing Wayland input devices This is a change that allows Clutter-based toolkits to interact with Wayland in a meaningful way for operations like resize and move. - Add a convenience CLUTTER_BIND_ALL enumeration This allows binding both position and size of an actor when using a ClutterBindConstraint. - Cally updates Use the newly added API to reimplement focus tracking. - Visual Studio project updates - Add clutter_text_coords_to_position() This method roundtrips the position_to_coords() one, and allows retrieving the index of the character at the given actor-relative coordinates. - Documentation updates. - Introspection annotation fixes. • List of bugs fixed since Clutter 1.9.10 [bugzilla.gnome.org] #669730 - actor: Fix and improve add_child_at_index() #669291 - box layout bug when callin the clutter_actor_hide() function #667540 - Desynchronized size between ClutterStageCogl and ClutterStageX11 #670433 - clutter-drop-action: annotation fixes for some signals #670402 - CRITICAL warning when ClutterDragAction has threshold > 0 [bugzilla.clutter-project.org] #2515 - Setting a non-default stage fullscreen before showing it doesn't work Clutter 1.9.10 2012-02-06 =============================================================================== • List of changes since Clutter 1.9.8 - Provide symbolic names for pointer buttons The primary, middle, and secondary pointer buttons now have simple and easy to remember constants that can be used in place of the "magic" numbers. - Add ClutterActorIter A simple API, using a stack allocated opaque structure, for safely and efficiently traverse the children of a ClutterActor. - Fix regression introduced by the default FixedLayout layout manager Existing ClutterActor subclasses using their own layout management should now work exactly like in Clutter 1.8. - Documentation fixes Including introspection annotations fixes. - Updates to the Wayland backend The Wayland client backend is now up to date with the 0.85 release of the Wayland protocol. • Bugs fixed since Clutter 1.9.8 [bugzilla.gnome.org] #668692 - Add symbolic names for left, right and middle buttons #668669 - Add iterator API for ClutterActor #667840 - Add annotations from Vala bindings #669360 - clutter-backend-eglnative.h missing in disted tarball #668951 - Fix warnings when weak_unreffing a finalized object Many thanks to: Rob Bradford, Tristan Van Berkom, Chao-Hsiung Liao, Evan Nemerson, Kerrick Staley, Matej Urbančič Clutter 1.9.8 2012-01-24 =============================================================================== • List of changes since Clutter 1.9.6 - Fix regressions in users of deprecated API Also, allow to mix the new Actor API with the old Container API without breaking. - Add GResource support in ClutterScript GResource is a new infrastructure in GIO that allows to compile resources like UI builder files and image data into a shared library or an executable. A newly added method to ClutterScript makes it possible to load a UI definition from a resource, like it's done for files and data. - Update the Wayland client backend The SHM transport API has changed upstream, and the Clutter backend has been updated to reflect it. Many thanks to: Rob Bradford, Fran Diéguez Clutter 1.9.6 2012-01-19 =============================================================================== • List of changes since Clutter 1.9.4 - Deprecate clutter_actor_show_all() and clutter_actor_hide_all() The latter never did make a lot of sense: hiding the parent will effectively hide the children as well; the former was there only for convenience, but Actors are visible by default. - Gracefully handle existing code The changes in ClutterActor introduced regressions in existing code because of the new functionaly that was introduced to replace deprecated classes like Box and Group. These regressions have hopefully been fixed; Clutter 1.9.6 has been tested with a project as complex as the GNOME Shell. - Fix build with binutils-gold The private dependencies were not used when building Clutter, and this made the Gold linker angry. - Allow tracking of an actor's first and last child ClutterActor has two new properties, :first-child and :last-child; these are read-only properties that can be used by toolkits based on Clutter to track the first and last child whenever they change. - Bump the Cogl dependency The 1.9.4 release depended on Cogl ≥ 1.9.4, but the minimum required version was not bumped along with the changes. • List of bugs fixed since Clutter 1.9.4 [bugzilla.gnome.org] #668137 - FTBFS: pangoft2 check seems to be broken Clutter 1.9.4 2012-01-17 =============================================================================== • List of changes since Clutter 1.9.2 - New scene graph API in ClutterActor ClutterActor now provides the API for adding, removing, and iterating over the list of children; this deprecates most of the ClutterContainer API. ClutterActor implements ClutterContainer as well, which means that all actors can be containers. - Layout management updates ClutterActor now have an horizontal and vertical alignment properties that will be used when added to a parent; a margin has also been added to the ClutterActor class. Both margin and alignment will be automatically managed during the allocation, so they will work out of the box. It is also possible to set a ClutterLayoutManager delegate object on any ClutterActor instance: the LayoutManager will take care of the layout policy for the children of an actor. - Add ClutterTextBuffer The ClutterTextBuffer class provides a storage for the contents of a ClutterText actor; the same instance can be shared across different actors as well. The main use for ClutterTextBuffer is implementing secure memory storage for the contents of a ClutterText in password mode. - Deprecations ClutterGroup, ClutterBox, and ClutterRectangle have been deprecated; their functionality is now available directly in ClutterActor. The old child actor management API in ClutterActor and ClutterContainer has been deprecated as well. Other deprecations include the ClutterStage fog-related properties and API; the ClutterContainer.sort_depth_order(), raise(), and lower() virtual functions; the internal child push and pop methods on ClutterActor. - ClutterTimeline can parse markers from ClutterScript Markers can now be defined inside ClutterScript, and a ClutterTimeline will be able to automatically add them from a UI definition. - Add a diagnostic mode Similar to the GLib diagnostic mode, Clutter now supports an environment variable that will print out diagnostic messages for deprecations and warnings that can only be detected at run-time. - Wayland backend updates The wayland backend now tracks the latest API changes in the client API, and Clutter now provides a Wayland surface actor that allows to write Wayland compositors, similarly to the X11TexturePixmap actor for the X11 backend. • List of bugs fixed since Clutter 1.9.2 [bugzilla.gnome.org] #665040 - The offscreen effect always recreates the texture if create_texture() is overridden to change the size #665052 - The internal effects should queue a repaint on the effect not on the actor when a property changes #664996 - clutter_state_set_key (allow-none) #664336 - path: Fix introspection annotations #664252 - in case GLSL shader fails to compile clutter-shader-effect.c should print out position in source code #664582 - lookingGlass: Fix global key press handler #660997 - Make _clutter_actor_queue_redraw_with_clip or an equivalent public Many thanks to: Chun-wei Fan, Robert Bragg, Rob Bradford, Neil Roberts, Bastian Winkler, Fran Diéguez, Jasper St. Pierre, Matej Urbančič, Piotr Drąg, Alexander Shopov, Bastien Nocera, Daniel Mustieles, Jeremy Moles, Jovan Naumovski, Kjartan Maraas, Lucian Adrian Grijincu, Manuel Osdoba, Ryan Lortie Clutter 1.9.2 2011-11-22 =============================================================================== • List of changes since Clutter 1.8 - Multi-backend build, and run-time backend selection Clutter can be built with support for multiple backends in the same shared library; the backend singleton is determined at run-time, either with the default backend for the platform, or using the value of the CLUTTER_BACKEND environment variable. - GDK windowing system backend A new backend has been added, which uses the GDK API for creating the drawing surface, as well as receiving the windowing system and input events. - Show a hint when ClutterText is in password mode If the password-hint-time ClutterSettings property is set to a non zero value, the last character entered inside a ClutterText actor when in password mode will be shown in plain for the duration of the timeout, before being replaced by the glyph chosen as the password character. - Improve Windows build support Clutter now provides project files to build the library using Visual Studio 9 and Visual Studio 10. Also, the scripts to build Clutter using MinGW have been improved. - Remove the requirement for using clutter_threads_init() Threads are initialized by default (depending on the platform), so there is no need to call clutter_threads_init(). - Deprecate the default ClutterStage The semantics of the default Stage were not obvious, and had the tendency to confuse the user. - Move the deprecated headers into their own directory This should help developers identify the deprecated API. - Change deprecation policy Deprecated functions are now marked using compiler annotations, instead of being forcibly disabled through pre-processor directives from the headers. Deprecations will cause compiler warnings, and thus are enabled by default. If you're building your project with compiler flags that consider every warning a fatal error, you can use the symbol CLUTTER_DISABLE_DEPRECATION_WARNINGS to disable the deprecation warnings. - Translation updates Portuguese, Assamese, Punjabi, Tamil, Oriya, Telugu, French, German, Danish, Traditional Chinese (Hong Kong and Taiwan), Catalan, Esperanto, Lithuanian, Galician, Norwegian bokmål, Slovenian, Hebrew, Bulgarian. • List of bugs fixed since Clutter 1.8 652588 - add support for password hint in ClutterText 659625 - mingw32: Update the build script to compile 1.8.0 659601 - offscreen effects on children of containers also with an offscreen effect get a wrong viewport 659928 - Two strings are not marked as translatable 659893 - clutter-main: Reword translator comment for default:LTR 656663 - Remove internal usage of ClutterGeometry in StageWindow 660354 - Add paint-deform-tiles option to CLUTTER_DEBUG 660471 - ClutterActor: Add clutter_actor_has_effects 660512 - ClutterShaderEffect recompiles the shader for every instance 660623 - clutter-actor-meta: Fix _clutter_meta_group_has_metas_no_internal 660985 - memory leak in clutter_box_layout.c 661015 - Add clutter_unicode_to_keyval function 660786 - Deprecate clutter_[sg]et_font_flags() 661887 - auto-resize of ClutterCairoTexture does not work correctly 657434 - Add a GDK backend to Clutter 663332 - orca reads my password in gnome-shell policykit dialogs 663594 - Minor whitespace parsing bug in clutter_color_from_string 663733 - clutter-stage-x11: Make sure to set geometry x and y 651718 - Make tests work on platforms supporting only a single stage 663999 - The removal of per-backend CLUTTER_VBLANK envvar had unwanted cruft in the Win32 backend 663720 - DeformEffect: Avoid redrawing actors on vertices invalidation 663636 - Use newer Cogl API in ClutterDeformEffect Special thanks to Chun-wei Fan, for building, testing, and keeping up to date the Visual Studio project files. Many thanks to: Neil Roberts, Rico Tzschichholz, Robert Bragg, Adel Gadllah, Lionel Landwerlin, Alexandre Franke, Colin Walters, Daniel Mustieles, Giovanni Campagna, Piotr Drąg, krishnababu k, A S Alam, Alexander Shopov, Algimantas Margevičius, Ask H. Larsen, Bruno Brouard, Carles Ferrando, Chao-Hsiung Liao, Craig R. Hughes, Damien Lespiau, Duarte Loreto, Florian Müllner, Fran Dieguez, Fran Diéguez, Håkon Løvdal, I Felix, Jasper St. Pierre, Jorge González, Joseph Scheuhammer, Kjartan Maraas, Kristjan SCHMIDT, Manoj Kumar Giri, Marc-André Lureau, Mario Blättermann, Matej Urbančič, Matthias Clasen, Nilamdyuti Goswami, Sunjin Yang, Tomeu Vizoso, Yaron Shahrabani, Zan Dobersek, Мирослав Николић. Clutter 1.7.90 2011-09-12 =============================================================================== • List of changes since Clutter 1.7.14 - Make sure that setting :use-markup does not depend on the order Setting the :use-markup property should yield the same results regardless of whether the :text property is also set before or after. This applies to ClutterText defined using ClutterScript as well. - Protect against multiple unrealize call on ClutterStage This should fix a segmentation fault in clutter-gtk when unrealize() is called multiple times on an already unrealized stage. - Fortify ATK event listener Make sure that we subscribe only to the events we want to, and avoid warnings caused by AT-SPI, as well as a leak. - Documentation fixes - Translation updates Indonesian, British English, Brazilian Portuguese, Oriya, Polish, Latvian, Hindi, Danish, Chinese (Simplified), Lithuanian, Turkish, Russian, Spanish, Asturian. • List of bugs fixed since Clutter 1.7.14 [bugzilla.gnome.org] #651940 - "use-markup" is ignored when set after "text" #658721 - cally: Fix up event listener registration minimally [bugzilla.clutter-project.org] #2629 - ClutterText thinks priv->text can be NULL, but it can't Many thanks to: Muhammet Kara, Andika Triwidada, Manoj Kumar Giri, Piotr Drąg, Aurimas Černius, Bruce Cowan, Edvaldo de Souza Cruz, Jorge González, Kenneth Nielsen, Matthias Clasen, Neil Roberts, Og B. Maciel, Rajesh Ranjan, Ray Wang, Rudolfs Mazurs, Xandru Armesto, Yuri Myasoedov Clutter 1.7.14 2011-09-05 =============================================================================== • List of changes since Clutter 1.7.12 - Use newer version of ATK Cally now depends on the latest version of ATK, to reduce the amount of ad hoc code needed and to use newer features that simplify the implementation of accessible objects in Clutter. - Allow using Layout Managers with generic containers Layout managers should not assume that they are allocating the whole area available from the Actor using them; this allows actors that support concepts like padding or margin to use a LayoutManager internally for its children. - Cookbook updates Add a recipe on how to bind a ClutterState to the signals of objects defined in ClutterScript. We also install the cookbook examples inside the $datadir/clutter-1.0/cookbook/examples directory. - Improve examples in the API reference Some of the interactive test suite units are actually good examples of how to use the Clutter API; we can use the XInclude tags to include the source code inside the API reference. - Ensure thread safety of the repaint functions add/removal Fix a long standing issue where adding or removing repaint functions was not acquiring a lock; now it's safe to manipulate the repaint functions list from different threads. - Make the ClutterText:line-wrap property work again In 1.2 the :line-wrap property was broken, and ClutterText would paint a PangoLayout wrapping until it fit the height of the allocation regardless of whether the :line-wrap property was set to FALSE or TRUE. Now we clip the PangoLayout before rendering it, if the :line-wrap property is set to FALSE and there is no ellipsization policy set. - Disable redirection to offscreen buffer by default Whenever a ClutterActor with children was not fully opaque, the actor was redirected to an FBO, to perform correct opacity computations. Sadly, this can lead to 3x slowdowns, given the amount of framebuffer objects created and the state changes that have to be performed. We decided to turn off this feature by default, to avoid the performance hit. It is still possible to enable this feature on a per-actor basis, though, and will work to reduce the hit in future versions of Cogl, Clutter and the drivers. • List of bugs fixed since Clutter 1.7.12 [bugzilla.gnome.org] #657681 - Crash when destroying an actor while dragging it [bugzilla.clutter-project.org] #2339 - ClutterText in 1.4 line-wraps even if line-wrap is disabled Many thanks to: Alejandro Piñeiro, Shankar Prasad, Chao-Hsiung Liao, Dan Winship, Daniel Mustieles, Daniel Nylander, Fran Dieguez, Marek Černocký, Robert Bragg Clutter 1.7.12 2011-08-29 =============================================================================== • List of changes since Clutter 1.7.10 - Reload the font caches on X11 when the user installs a new font Whenever the user installs a new font inside one of the directories that ware being watched by a session daemon, or changes the fontconfig configuration, the toolkits using FontConfig (either directly or indirectly e.g. through Pango, like Clutter) should listen to the Fontconfig/Timestamp XSETTINGS key and release all the font configuration caches. This allows selecting the newly installed fonts without requiring the user to restart the application. - Allow using "font-description" as a ClutterScript alias for "font-name" ClutterText:font-description allows passing a PangoFontDescription directly to a ClutterText; when defining a ClutterText instance inside a ClutterScript file, :font-description should be an alias for :font-name, which takes a string and converts it to a PangoFontDescription. - Make sure that LayoutManager subclasses take the allocation origin into account when allocating the children A LayoutManager should be resilient against allocations with an origin not positioned at (0, 0); this allows actors using a layout manager instance to munge the box and implement things like margin and padding without the layout manager having knowledge of those concepts. - Build fixes Always link against libm when building Clutter (and its tests); don't rely on libraries lower on the stack to do so. - Documentation fixes • List of bugs fixed since Clutter 1.7.10 [bugzilla.gnome.org] #657529 - Build failure Many thanks to: Robert Bragg, Daniel Mustieles, Fran Dieguez, Kjartan Maraas Clutter 1.7.10 2011-08-15 =============================================================================== • List of changes since Clutter 1.7.8 - Do not update the last paint volume when picking Last minute fix for an issue that was most prominently manifesting itself when using GNOME Shell with Clutter 1.7; this should resolve the issue that dragging icons from the dash left around some stale pixels. - Fix building the tests The performance and micro-benchmark tests did not pick up changes in local dependencies, e.g. under a JHBuild root. • List of bugs fixed since Clutter 1.7.8 [bugzilla.gnome.org] #656588 - Outdated FSF Address in code files Many thanks to: Alejandro Piñeiro, Robert Bragg Clutter 1.7.8 2011-08-15 =============================================================================== • List of changes since Clutter 1.7.6 - Various fixes in Cally Make sure to use Clutter's API and remove old workarounds that were put into place when Cally was a separate project and targeting pre-1.0 API versions of Clutter. - Add ClutterCairoTexture:auto-resize This property makes it easier to create 2D canvas surfaces by tracking the actor's allocation in a backward compatible way. - Add ClutterAnimatable.interpolate_value() This new virtual function deprecates the animate_property() virtual of the Animatable interface, which was sub-optimal in different ways. - Allow using Animatable implementations with ClutterState Thanks to the new interpolate_value() virtual it is now possible to use the Animatable interface with ClutterState; this allows animating action, constraint and effect properties using the same "@" syntax also used by ClutterAnimation and clutter_actor_animate(). - Improve ClutterModel's implementation Avoid a bunch of needless checks, and make sure that the ::row-changed signal is emitted in all cases when a row has been changed through the ClutterModelIter API. The conformance test unit for ClutterModel has also been improved to avoid future regressions. - Improve ClutterStage behaviour on OS X Make sure that the fullscreen, multi-screen and key focusing are well-behaved on OS X, by implementing the correct delegate methods. • List of bugs fixed since Clutter 1.7.6 [bugzilla.gnome.org] #655387 - Missing GObject introspection annotations #655306 - Added windowDidChangeScreen delegate to fix pick errors when window moved to different screen #655311 - Prevent hiding of unrelated application windows when stage returns from fullscreen #655307 - Fix resource leak on subsequent calls to clutter_stage_osx_realize #648633 - gnome-shell notification pop-ups do not emit object:state-changed:showing Many thanks to: Kirk A. Baker, Neil Roberts, Alejandro Piñeiro, Alejo Pacin, Daniel Mustieles, Evan Nemerson, Marek Černocký, Philippe Normand, Robert Bragg Clutter 1.7.6 2011-07-26 =============================================================================== • List of changes since Clutter 1.7.4 - Accessibility fixes in Cally Fix the implementation of the AtkText interface for ClutterText. - Depend on the new Cogl windowing system API. - Add functions for retrieving the clip boundaries on the Stage The clutter_stage_get_redraw_clip_bounds() function is useful for window managers (like Mutter) that need to retrieve the clipped region used on the Stage. - Auto-detect the default flavour when building The default flavour used when building should be set depending on the platform. - Mark the OSX backend as non-experimental The OSX backend is being developed, and maintained, so it should not be considered experimental. - Make sure that Gestures are cancelled when missing release events - Correct the rounding for paint volumes Try to provide stable results against potential floating point rounding margins when projecting 3D paint volumes into screen bounding boxes; this should avoid re-creating FBOs and always correctly handle clipped redraws. - Do not clobber XI2 events data This allows to play along with other toolkits using XI2. - Fix ClutterSnapConstraint's right edge snapping - Deprecations ClutterScore, clutter_texture_new_from_actor(), clutter_cairo_texture_create*() • List of bugs fixed since Clutter 1.7.4 [bugzilla.gnome.org] #653959 - clutter-actor: Don't apply shaders during picking #654361 - uprof: Rename timers to remove the EGL specific bits #654363 - uprof: Add the units in the name of the "Per Frame" timer attribute #654103 - Fixed typo #654656 - Improve XGenericEventCookie allocation wrt other toolkits #654024 - snap-constraint: Fix allocation for CLUTTER_SNAP_EDGE_RIGHT #654066 - ClutterTimeline new-frame signal not working correctly on some platforms #654718 - clutter-1.6.16 compile issues #654726 - text: Fix the default value of "editable" #654727 - alpha: Don't use the GClosure to compute the alpha when possible #655342 - memory leak in clutter_bin_layout_get_preferred_width/height [bugzilla.clutter-project.org] #1733 - AtkText implementation on CallyText is not complete #2421 - Way to get current repaint bounds Many thanks to: Robert Bragg, Philippe Normand, Neil Roberts, Damien Lespiau, Tomeu Vizoso, Gil Forcada, Alejandro Piñeiro, Bastian Winkler, Carlos Garnacho, Christian Kirbach, Daniel Mustieles, Dinh Bowman, Kjartan Maraas, Marek Černocký, Mario Blättermann, Matej Urbančič, Piotr Drąg Clutter 1.7.4 2011-07-04 =============================================================================== • List of changes since Clutter 1.7.2 - Unify the GLX and EGL backends to be a single code base The GLX and EGL backends shared most of their code, and with the split out Cogl, we can unify the code base into a single backend. The API as well as the ABI are preserved. - Restore a wider range of Z values for actors The computation for the near and far planes given the perspective transformation used to set up the viewport was broken in 1.7.2, and the distance from the focal point was greatly reduced. This has now been fixed. - Bump up the dependency of Cogl New windowing system API in Cogl required bumping the minimum version to the latest development snapshot, 1.7.2. - Add ClutterDropAction The ClutterDropAction is an action for allowing ClutterActors to react when an actor being dragged through ClutterDragAction crosses, or is dropped over, them. - Add a performance test suite This suite is an addition to our conformance and interactive test suites; the infrastructure can be used by buildbots and report tools to track performance regressions across various commits. - Documentation and annotation fixes - Build fixes • List of bug fixes since Clutter 1.7.2 [bugzilla.gnome.org] #650329 - ClutterModifierType: Port fix from GDK to clutter's GDK copy #652566 - Clutter-CRITICAL **: _clutter_stage_get_window: assertion `CLUTTER_IS_STAGE (stage)' failed #651784 - transition=spin / transition=spin-text is broken in pinpoint with Clutter master #652842 - Add a Drop action #653066 - ClutterDragAction does not support multiple pointers #653307 - Change the signature of ClutterTexture::load-finished to give a GError, instead of a gpointer #653607 - Arrays not annotated as such for introspection bindings #651079 - ClutterText "blinks" when deleting text after going out of bounds #650675 - clutter-media: mention the asynchronous behavior of set_playing() [buzgilla.clutter-project.org] #2625 - The furthest visible z value is really low Many thanks to: Robert Bragg, Neil Roberts, Peter Ward, Colin Walters, Daniel Mustieles, Jasper St. Pierre, Samuel Degrande, Øyvind Kolås Clutter 1.7.2 2011-06-13 =============================================================================== • List of changes since Clutter 1.6.0 - Cogl moved out of tree The Clutter OpenGL abstraction library has been moved to a separate repository and can be used as a stand-alone shared library. Clutter has been modified to depend on Cogl's experimental API. - Correctly composite non fully opaque children Non fully opauqe actors with non fully opaque children will automatically redirect children paint operations to offscreen buffers, which allow correct composition taking into account the overall opacity of the scene's sub-graph. The same mechanism can be used to create a paint cache, and paint that cache when the actor or its children do not change, instead of painting the whole sub-graph again. - Allow connecting signals to ClutterState states in ClutterScript When defining a scene using ClutterScript it's possible to directly connect a state inside a ClutterState object (both defined in ClutterScript or in code) to an object's signal, without using an explicit signal handler in the code. - Long-press handling in ClutterClickAction ClutterClickAction will detect a long-press gesture and emit signals to query, activation and cancellation. - Added ClutterGestureAction and ClutterSwipeAction ClutterGestureAction is a generic "pointer gesture" action; it doesn't provide an implementation: it's up to the developer to add the gesture recognition code. ClutterSwipeAction is a GestureAction sub-class that implement the "swipe" gesture. The GestureAction API is already future proof for multi-device/multi-touch, even though the multi-touch isn't currently implemented. - Allow Effects to influence picking Effects that change the geometry of a ClutterActor should also be allowed to change the picking code to make sure that event handling keeps working. ClutterEffect has a new pick() virtual function for these cases. • List of bugs fixes since Clutter 1.6.0 [bugzilla.clutter-project.org] #2257 - clutter fails to link on OS X (10.6) #2447 - atkevents example crashes is the accessibility is disabled #2482 - Cally should avoid to provide a default name and description #2484 - It would be nice to have the old cally Changelog #2553 - new ClutterText API to access the Pango layout offsets #2555 - Per-framebuffer journal causes corruptions #2562 - Crash upon running Clutter-based programs #2585 - add ClutterAction for slide gestures #2588 - Assertion failure in _cogl_pipeline_set_layer_texture_target #2595 - clutter-text: Add a selected-text-color #2597 - CallyStage doesn't have a proper parent #2599 - The paint volume for ClutterText is wrong #2602 - Expose events ignored when doing clipped redraws #2610 - Add recipe about implementing a ClutterEffect #2619 - Removes the addition of the .exe extension to unit-test scripts, on win32. #2620 - _cogl_offscreen_new_to_texture_full() leaks reference when failing #2621 - Clutter segfaults if you queue a redraw of an unmapped actor inside the notify::mapped callback #2631 - [PATCH] Enable evdev ClutterInputDevice objects on creation, as the other backends do #2632 - [PATCH] GL_IMG_TEXTURE_NPOT enables non-power-of-two features #2633 - Make the pick id pool a per-Stage resource #2640 - [patch] allow single-bit imprecision in some conformance tests #2644 - Quartz backend: "Bare" modifier keypresses not generating events #2652 - clutter_actor_queue_redraw() on destroyed stage #2655 - segfault when disposing a slave device without a master #2656 - Clutter can crash when destroying a stage from an event #2667 - git head won't build under Win32 [bugzilla.gnome.org] #650665 - CallyActor shouldn't add by default "press", "release" and "click" #647875 - Use Cairo to dump the pick buffers #647876 - Make the pick if pool a per-Stage resource #650487 - Sync allocation in ClutterBoxLayout with the one in GtkBox #650597 - clutter-id-pool: fix warning on bad pick #650650 - clutter-offscreen-effect: use target size when setting up the viewport #651700 - Give a chance to effects for running when picking #652129 - Use "const" instead of G_CONST_RETURN Many thanks to: Neil Roberts, Robert Bragg, nobled, Daniel Mustieles, Elliot Smith, Matej Urbančič, Alejandro Piñeiro, Chris Lord, Marek Černocký, Tomeu Vizoso, Jasper St. Pierre, James Athey, Piotr Drąg, Øyvind Kolås, Adam Jackson, Andrej Žnidaršič, Kjartan Maraas, Adel Gadllah, Alexandre Franke, Christian Kirbach, Craig R. Hughes, Dan Winship, Dioselin, Kristjan SCHMIDT, Mario Blättermann, Miguel Bouzada, Peter Ward, Philippe Normand, Samuel Degrande, Viatcheslav Gachkaylo Clutter 1.6.6 2011-02-21 =============================================================================== • List of changes since Clutter 1.6.4 » Add four mechanisms for migrating textures inside a Cogl atlas; it is possible to change the default by using the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE. » Use the offscreen buffer size to compute the vertices of ClutterDeformEffect. » Make the FPS counter displayed using CLUTTER_SHOW_FPS per-stage. » Documentation fixes. » Annotation fixes for introspection. • List of bugs fixes since Clutter 1.6.4 #2538 - crash in gnome-shell #2558 - backend-glx: Remove redundant glFlush() #2561 - Updates to COGL sources regarding non-standard code usage #2571 - DeformEffect should use the FBO size Many thanks to: Neil Roberts Clutter 1.6.4 2011-02-14 =============================================================================== • List of changes since Clutter 1.6.2 » Fix handling of opacity in ClutterOffscreenEffect. » Fix partially off-stage actors in ClutterOffscreenEffect. » Add a recipe in the Cookbook for animating an actor on a path. » Refresh key mapping when notified by X11. » Clean up the ClutterStageWindow redraw implementations. » Update the Wayland backend to match upstream API changes: • allow using shared buffers if DRM fails; • improve checks for the required extensions. » Documentation fixes. » Introspection annotations fixes. » Fix setting the matrix for a pipeline layer. » Fix flushing the framebuffer when switching to it. » Make sure to call glFlush when blitting a stage region to the front buffer, to avoid the driver batching the command for an undefined amount of time. » Fix the windowing system defines for non-X11 platforms. » Fix the location of the shared objects in the Cally pkg-config file. • List of bugs fixed since Clutter 1.6.2 #1024 - test-multistage.c assertion failure #1025 - test-paint-wrapper.c assertion failure #1028 - test-random-text.c hangs with spinning beach ball #1029 - test-cogl-primitives.c hangs with spinning beach ball #1358 - scroll events not handled #2373 - OSX Backend fix #2525 - [PATCH] x11: Handle key map changes #2541 - ClutterOffscreenEffect with multiply the actor's opacity #2546 - [PATCH, git branch] update wayland backend #2549 - Fix lib locations in *.pc.in #2550 - offscreen effects are always clipped to stage boundaries #2551 - Slight drawing lag with larger windows on Intel x3100 (i965) #2554 - Add recipe per animating an actor on a curved path #2555 - Per-framebuffer journal causes corruptions #2558 - backend-glx: Remove redundant glFlush() #2559 - x11: segfault on closing non-default stage window Many thanks to: nobled, Chris Lord, Neil Roberts, Robert Bragg, Adel Gadllah, Elliot Smith Clutter 1.6.2 2011-02-07 =============================================================================== • List of changes since Clutter 1.6.0 » Fix building the Clutter Cookbook from the released tarballs. » Set the input device field in ClutterEvent even when they have been allocated by Clutter. » Fix the color comparison when setting the layer combine constant. » Fix memory corruption when removing the last reference on a Cogl vertex buffer object. » Fixes for the OSX backend. • List of bugs fixed since Clutter 1.6.0 #2540 - coobook examples do not build from tarball #2544 - Using vertex buffers causes memory corruption when you unref the CoglHandle #2545 - Broken event handling in OS X backend #2549 - Fix lib locations in *.pc.in Many thanks to: Neil Roberts, Viatcheslav Gachkaylo Clutter 1.6.0 2011-01-31 =============================================================================== • List of changes since Clutter 1.5.14 » Remove more private symbols from the X11 backend. » Add CLUTTER_BIND_POSITION and CLUTTER_BIND_SIZE values to the ClutterBindCoordinate enumeration; these are short-hand values for binding both X and Y, or width and height, instead of requiring two ClutterBindConstraint instances. » Clean up in the X11 backend to reduce indirection. » Small clean ups in the Win32 backend. » Make Shift+Backspace behave like Backspace in ClutterText. » Emit the ::new-frame signal even on the first frame of ClutterTimeline, to allow setting up the initial state of an animation. » Fix an invalid memory access in ClutterAnimator. » Flush the per-framebuffer journal when switching between framebuffers. » Generalize updating GLES2 uniforms. » Add debug code for tracing clipping in Cogl. » Improve the OSX event loop, re-using the same implementation as GDK. Also, provide simple, core-like device support. • Bugs fixed since Clutter 1.5.14 #2490 - OS X backend event loop improved #2530 - animator: Animator uses key after freeing it #2534 - Incorrect description of function 'clutter_actor_pop_internal' #2535 - Add recipe about creating a composite actor Many thanks to: Neil Roberts, Robert Bragg, Elliot Smith, Rob Bradford, Viatcheslav Gachkaylo Clutter 1.5.14 2011-01-24 =============================================================================== • List of changes since Clutter 1.5.12 » Allow getting the state modifiers from a ClutterClickAction. » Fix ClutterDragAction to never leave the event delivery in an unwanted state. » Optimize state changes for texture and data states. » Enable VBO support in Cogl for GLES2. » Fix compilation on GLES1.1. » Documentation fixes. » ClutterGLXTexturePixmap has been deprecated; its parent class ClutterX11TexturePixmap and the low level CoglTexturePixmapX11 API provide access to the same features. » Be more resilient against timelines controlling the state of other timelines during the clock tick. » Provide defines for the windowing platforms, to allow portable applications to include the correct header and select the correct API depending on the target. » Introduce a fast path for cogl_read_pixels() that uses the journal to determine the position of a single pixel on the stage; this fast path gracefully degrades to the usual render-based approach, and should speed up picking considerably in the case of opaque quads batched together. » Support XInput axis data on valuator devices, and introduce XInput2 support for event translation and device hotplugging. The support for XI and XI2 must still be explicitly enabled by the developer, but it is now compiled in by default. It can be disabled at compile time by passing --disable-xinput to the configure script. » Clean up the unintentionally leaked internal symbols in the X11 and GLX backends. » Allow defining the contents of the rows of a ListModel using ClutterScript. This completes the ability to fully define a ClutterListModel inside a UI definition file. • Bugs fixed since Clutter 1.5.12 #1422, key input handler for eglnative #1456, Hinting mishandling #1721, XInput2 support #2268, EGL backend dependent on X11 headers #2400, Don't enable GL_POINT_SPRITE on GLES #2497, should not throw away a program when just the texture object has changed #2512, shader: Don't notify properties when finalizing shaders #2513, script-parser: Also honor properties of type GType #2516, [PATCH] Fails to compile with --with-gles=1.1 #2518, introspection: Add missing (out) annotations for get_color() #2520, Add API to get modifier type in ClutterClickAction #2522, ClutterDragAction might indefinitely disable motion events #2524, It's possible to receive a new-frame signal after stopping a timeline #2526, model: Fix some GObject-Introspection annotations #2527, model: Change the column argument type to gint for clutter_model_set_sort #2528, model: Add support to define rows in ClutterScript Many thanks to: Robert Bragg, Neil Roberts, Bastian Winkler, Lucas Rocha, Adel Gadllah, Chris Lord, Damien Lespiau Clutter 1.5.12 2011-01-11 =============================================================================== • List of changes since Clutter 1.5.10 » Allow disabling the focus when showing a ClutterStage; this also makes Clutter more compliant to the X11 window manager specifications. » Avoid state corruption in relayout cycles. » Do not crash when destroying actors during CLUTTER_LEAVE events. » Remove signal handlers when disposing constraints. » Keep the pixel alignment for ClutterAlignConstraint. » Do not release compiled ClutterShader during their finalization to avoid a warning. » Revert an ABI break on the ClutterContainer pre-requisites. » Fix the name of the cogl_normal_in attribute. » Do not assume CoglBitmaps are allocated to height * rowstride. » Fix the core device list creation on X11. » Avoid enabling blending in the Cogl journal, if possible. » Documentation fixes. » Build fixes for mixed autotools version environment. » Improve the performance of getting the number of rows of a ClutterListModel. » Don't use obsolete API internally. » Build fix for compiling EGL backend with OpenGL under X11. » Parse GType object properties in ClutterScript. Many thanks to: Neil Roberts, Johan Bilien, nobled, Adel Gadllah, Damien Lespiau, Kristian Høgsberg, Nguyễn Thái Ngọc Duy, Tomeu Vizoso, Bastian Winkler Clutter 1.5.10 2010-12-17 =============================================================================== • List of changes since Clutter 1.5.8 » Add an evdev input backend; this adds support for input devices on Linux when using the EGL-based backends. » Update the build scripts for compiling the Windows backend. » Updates for the Cookbook and the API references. » Fix ClutterModel::get_iter_at_row() for filtered ClutterListModels. » Scores of fixes to the pipeline state object for GLES2. » Add code that tries to perform manual clipping to avoid breaking up batches of primitives. » Keep a cache of ARBfp programs indexed by the pipeline state that led to their generation. » Accept G_TYPE_DOUBLE values in ClutterShaderEffect uniforms. » Update the Wayland client backend. » Update the build for Windows. » Rename the ClutterTimeline:reverse property introduced in Clutter 1.5.6 to ClutterTimeline:auto-reverse. » Clean up the interactive tests suite. Many thanks to: Neil Roberts, Damien Lespiau, Robert Bragg, Elliot Smith, Jussi Kukkonen, nobled, Alexandre Quessy, Mike Owens, Tomeu Vizoso Clutter 1.5.8 2010-11-29 =============================================================================== • List of changes since Clutter 1.5.6 » Add a migration guide for code using Behaviours. » Allow parsing rgb(), rgba(), hls() and hlsa() color definitions. » Performance improvements for the ClutterX11TexturePixmap. » For caching purposes, do not discard the Material or the compiled shaders for Offscreen and Shader effects. » Fix image height in 3D Cogl textures. » Create a GLSL generation backend for materials, similar to the ARBfp one; this backend is the default for GLES2. » Use FBOs and cogl_read_pixels() to efficiently read back partial texture data. » Various fixes in paint volumes computation and caching. » Use the internal scene graph walk API to remove the map/unmap implementation requirement for composite actors and for containers with internal children. » Simplify the backend notification of layer changes. » Queue clipped redraws for Expose events on X11. » Plug leaks. » Include a porting guide from Behaviours. » Add a recipe on scaling animations in the Cookbook. Many thanks to: Neil Roberts, Robert Bragg, Owen W. Taylor, Tomeu Vizoso, Chris Lord, Alexandre Quessy, Evan Nemerson, Elliot Smith Clutter 1.5.6 2010-11-19 =============================================================================== • List of changes since Clutter 1.5.4 » Deprecate ClutterBehaviour and its sub-classes: the same functionality is available using the animation framework. » Add ClutterSnapConstraint, a constraint implementation that snaps together the edges of two actors. » Add ClutterPathConstraint::node-reached. » Deprecate ClutterTimeoutPool and ClutterFrameSource: this API is not used internally any more, and since it's not integrated with the master clock it's of relative use. » Add a named, global color palette. » Add the ClutterTimeline:reverse property, for automatically reversing the direction of a timeline after the emission of the ::completed signal. » Performance improvements in the clip stack. » Do not use pointer grabs in ClutterClickAction. » Improve the internally used Cogl API for primitives, paths and buffers; this is the first step towards Cogl 2.0. » Allow using the COGL_DEBUG environment variable to disable the NPOTs support. » Plug a nasty infinite loop in the XSETTINGS implementation. » Internally rename CoglMaterial to CoglPipeline; this should make it clearer that the API refers to the state of the GPU pipeline. » Add support for clipped redraws on EGL using the NOK_swap_region extension. » Build fixes. » Use the monotonic clock API if compiling against GLib ≥ 2.27.3. » Update examples in the Cookbook. » Add a Cookbook recipe for looping animations. » Add more documentation on Constraints. » Documentation fixes. Translation updates: Italian, Polish Many thanks to: Robert Bragg, Neil Roberts, Elliot Smith, Owen W. Taylor, Damien Lespiau, Lucas Rocha, Maxim Ermilov, Piotr Drąg, Tomeu Vizoso, muflone Clutter 1.5.4 =============================================================================== • List of changes since Clutter 1.5.2 » Add a backend for Wayland. » Depend on GLib ≥ 2.26, Cairo ≥ 1.10. » Do not generate the conformance tests list using the test-conformance binary. » Implement interval progress functions for ActorBox, Vertex, Geometry, Color and Units. » Allow overriding the surface creation in Clutter.CairoTexture. » Add interpolate() method to Clutter.Color. » Add ClutterPathConstraint, a simple constraint that sets the origin of an actor's allocation to follow a ClutterPath. » Plug some memory leaks. » Fix build of the CEx100 and EGL backends. » Fixes for the OSX backend. » Documentation consistency and spell checking fixes. » Build fixes. Translation updates: Andika Triwidada (id), Damien Lespiau (fr), Piotr Drąg (po) Many thanks to: Damien Lespiau, Neil Roberts, Kristian Høgsberg, Andika Triwidada, Ole André Vadla Ravnås, Robert Bragg, Owen W. Taylor, Piotr Drąg, Roland Peffer Clutter 1.5.2 (04/10/2010) =============================================================================== • List of changes since Clutter 1.4.0 » Add API to ClutterActor to allow any actor to define its 3D paint volume and its stage-relative 2D bounding box; the paint volume is the 3D space occupied by an actor during the paint sequence. This allows better sizing of the FBOs, and opens the door to scenegraph culling and accurate clipped redraws. The mechanism is opt-in: actors have to implement the get_paint_volume() virtual function. Callbacks attached to the ::paint signal will also disable any culling and clipped redraw in place internally. » Plug a leak in ClutterActor by disposing all constraints. » Rework the build system to be as non-recursive as possible; this should speed up the build of Clutter, and makes the build layout easier to understand and update. » Remove the internal copy of JSON-GLib; the internal copy was falling behind at a spectacular level, and it was actually making the build rather complicated - also by adding an unwanted, but needed, introspection data generation. The required JSON-GLib has also been bumped to the new stable release, 0.12.0. » Use g_object_install_properties() with GLib 2.26. » Implement ClutterContainer::child-notify, which slipped through the cracks of many development cycles without anyone noticing. » Document and test clutter_actor_contains(), especially the corner cases. » Plug a leak in CoglTexture2DSliced. » Plug a leak in ClutterAnimator's handling of timelines. » Trap glXDestroyPixmap() in CoglTexturePixmapX11 to avoid BadDrawable errors when the GLX pixmap is destroyed behind Cogl's back. Many thanks to: Robert Bragg Neil Roberts Elliot Smith Alejandro Piñeiro Aron Xu Colin Walters Ray Strode Stephen Kennedy Clutter 1.4.0 (24/09/2010) =============================================================================== • List of changes since Clutter 1.3.14 » Add support for describing ClutterState states using ClutterAnimators in ClutterScript. » Build fixes » Include ClutterConstraints into the allocation phase, to avoid layout cycles and improve the performance. » Add new recipes to the Cookbook to illustrate constraints-based layouts. » Fix the request mode of ClutterBoxLayout. » Fix the handling of transformations in ClutterOffscreenEffect. » Documentation and introspection fixes. Many thanks to: Elliot Smith Robert Bragg Neil Roberts Bastian Winkler Dominique Leuenberger Frederik Hahne Jammy Zhou Øyvind Kolås Clutter 1.3.14 (15/09/2010) =============================================================================== • List of changes since Clutter 1.3.12 » Fix applying layout properties from ClutterScript definitions in case of multiple children. » Add a Clutter EGL backend for Intel CEx100 platforms. » Add new recipes in the Cookbook: - texture cross-fading - ClutterScript definitions - event handling - ClutterAnimator - reusing complex animations » Add methods to retrieve the clicked button and to force a release in ClickAction. » Documentation fixes in the API reference. » Cache a full pick buffer and re-use it in case the scene does not change between events. » Fix a Valgrind report of memory corruption in ClutterState.remove_key(). » Allow detaching animations created with clutter_actor_animate(). » Depend on GObject-Introspection >= 0.9.5. » Provide introspection data for the X11-specific API, like ClutterX11TexturePixmap » Use a template material for ClutterTexture to minimize the creation of new materials. » Split ClutterDragAction:drag-threshold into two, per-axis properties: :x-drag-threshold and :y-drag-threshold. » Allow disabling the -Bsymbolic flag when linking. » Use gettext >= 0.17 to handle the localization. » Flush the framebuffer earlier when drawing the vertex buffers, to fix a crash when dealing with clip stacks. » Make sure ClutterX11TexturePixmap removes the Cogl texture handle before freeing the X11 Pixmap to avoid an error. » Avoid regenerating the CoglMaterial programs too many times. Many thanks to: Elliot Smith Robert Bragg Damien Lespiau Neil Roberts Colin Walters Owen W. Taylor Bastian Winkler Alejandro Piñeiro Alexandros Frantzis Chris Kühl Luca Invernizzi Henrik Hedberg Javier Jardón Lucas Rocha Murray Cumming Øyvind Kolås Clutter 1.3.12 (16/08/2010) =============================================================================== • List of changes since Clutter 1.3.10 » New recipes in the Cookbook: - create and animate sub-textures - layout managers - scroll events » Set the ClutterTexture:filename property to also be readable. » Avoid layout cycles when creating ClutterLayoutMeta objects during the ::allocate implementation » Add a ClutterTableLayout, a layout manager for tabular layouts. » Capture ENTER and LEAVE events on the stage within the DragAction. » Plug memory leaks. » Use g_object_notify_by_pspec(), if available, to speed up the emission of the ::notify signal on property changes. » Re-use the Cogl texture atlas for the CoglPango glyphs cache, and improve the performance with large font sizes. » Various fixes in the Materials comparison and inheritance. » Add the ability to associate a user program to a material. Many thanks to: Neil Roberts Elliot Smith Robert Bragg Damien Lespiau José Dapena Paz Owen W. Taylor Clutter 1.3.10 (04/08/2010) =============================================================================== • List of changes since Clutter 1.3.8 » Fix a locale-dependent conversion from double to string when generating ARBfp programs for the materials. » Use the XKB extension on X11 platforms to convert between hardware keys to key symbols. » Documentation fixes in the API reference. » More recipes, with videos and full examples, in the Cookbook. » Add localization support and initial translations of error messages that might be visualized in a user interface. » Improve debugging output. » Fix build of the GLX backend on OSX. » Multiple fixes to the native OSX backend. » Add support for 3D textures in Cogl. » Fix shader-related issues and leaks in the new Material code. » Unify GLSL support in the GL and GLES 2.0 drivers. » Allow specifying an hint to disable clearing the stage before each paint cycle. Many thanks to: Neil Roberts Roman Kudiyarov Elliot Smith Robert Bragg Chris Kühl Chris Leick Nate Stedman happyaron raven Øyvind Kolås Clutter 1.3.8 (12/07/2010) =============================================================================== • List of changes since Clutter 1.3.6 » Merge Cally, the Clutter Accessibility Library, in the Clutter tree. » Take into consideration the source actor's position in the AlignConstraint logic. » Update the internal COGL tesselator with the latest GLU code. » Fix CoglTexture data readback. » Use GL_MAX_TEXTURE_SIZE on GLES when checking the supported texture size. » Add missing public functions from COGL headers. » Fix GLES build after the Cogl material changes. » Rename the experimental CoglPixelBuffer API to CoglPixelArray. » Split the clutter_state_change() method into two: clutter_state_set_state(), for animated state changes; and clutter_state_warp_to_state() for immediate state changes. » Documentation and introspection fixes. » Build fixes Many thanks to: Robert Bragg Neil Roberts Elliot Smith Alejandro Piñeiro Øyvind Kolås Damien Lespiau Alexandros Frantzis Clutter 1.3.6 (30/06/2010) =============================================================================== • List of changes since Clutter 1.3.4 » Provide a fallback on GLX if the MESA_copy_sub_buffer extension is not available, by using EXT_framebuffer_blit. Both mechanisms are also throttled to avoid taking all resources when using them in a compositor like Mutter. » Use (and cache) fragment shaders instead of texture combiners inside Cogl materials. Cogl will automatically fall back from GLSL to ARBfp to fixed functions depending on the level of support of the underlying GL implementation. » Implement a new design for materials; this allows scaling up the number of materials in a scene, and also makes copying materials less expensive. » Make Cogl materials responsible for depth testing, and add new experimental API. » Use the (modified) GLU tesselator to draw paths to a vertex buffer object instead of using the stencil buffer, or the scanline rasterizer on platforms without a stencil buffer. » Add ClutterDeformEffect, a base class for effects that deform an actor's geometry when painting it; ClutterPageTurnEffect is an implementation of a "page curl" deformation using the DeformEffect API. » Always use scissoring when clipping, to reduce the amount of buffer that has to be cleared. » Allow ClutterShaderEffect sub-classes to use vertex shaders by setting a constructor property; the default remains fragment shader. » Remove the button of the press event from the DragAction::drag-begin and DragAction::drag-end signals. This is an API break from 1.3.4. » Do not promote clipped redraws to full redraws. » Improve the consistency of the default state name in ClutterState, both in the API and in the serialization format. » Fix a rounding error with the Text layout size. » Add utility functions for CoglMatrix and CoglColor. » Avoid a re-allocation cycle warning when resizing the surface of a CairoTexture actor from within the allocate() implementation. » Do not add the GL libraries for the EGL X11 backend. » Add more checks for size of data passed to the shader types GValue functions. » Add width and height to the BindConstraint. » Parse actions, constraints and effects inside an actor definition for ClutterScript. » Merge the code of native and x11 backends for EGL into a single backend; also allow creating GL context with the EGL backend. » Use XSETTINGS to set up the backend configuration options, like the font name, resolution, font options and double click options, on X11; this also allows ClutterText actors created using the default font name to be updated when the font name and options change; similarly, this allows ClutterUnits to be updated when the screen resolution changes. » Implement the texture_from_pixmap extension support inside Cogl itself, and unify ClutterX11TexturePixmap and ClutterGLXTexturePixmap. » Documentation improvements in the API reference and in the cookbook. » Use the -Bsymbolic-functions linker option on supported platforms to avoid intra-library PLT jumps. » Fix painting transparent stages on X11 using the :use-alpha property of ClutterStage. » Fix emission of scroll events on Windows. Many thanks to: Robert Bragg Neil Roberts Øyvind Kolås Damien Lespiau Elliot Smith Chris Lord Johan Bilien Richard Hughes Adel Gadllah Alejandro Piñeiro Colin Walters Dan Winship Kristian Høgsberg Sunil Sadasivan Clutter 1.3.4 (07/06/2010) =============================================================================== • List of changes since Clutter 1.3.2 » Add ClutterEffect, a ClutterActorMeta sub-class that affects the way an actor paints itself. » Clutter provides a base class for effects painting to an offscreen buffer, and a base class for effects using the GL programmable pipeline (through the GLSL shader language). » Clutter also provides some simple, shader-based effects: ClutterBlurEffect, ClutterColorizeEffect and ClutterDesaturateEffect. » Effects can be applied to any actor, and can also be stacked. » Add ClutterClickAction, an action that provides "button-like" semantics for any ClutterActor. » ClutterDragAction now moves the actor to which it has been applied by default, using a class handler for the ::drag-motion signal. » Add the :pick-with-alpha property to ClutterTexture; this property allows using the alpha channel of a texture when picking it. » Regenerate the mipmaps on COGL textures when a texture is modified. » Documentation and build fixes. Many thanks to: Robert Bragg Damien Lespiau Neil Roberts Colin Walters Clutter 1.3.2 (24/05/2010) =============================================================================== • List of changes since Clutter 1.2 » Add ActorMeta, a class for run-time composition of actions and constraints on a ClutterActor: » Add ClutterAction, a class for implementing business logic related to event handling. » Add ClutterConstraint, a class for implementing business logic related to sizing and positioning. » ClutterDragAction is an Action sub-class that implements signals and properties for dragging actors. » ClutterAlignConstraint and ClutterBindConstraint are two Constraint sub-classes that allow relative positioning with fixed layout managers. » Add ClutterState, an object for defining state transitions. » Add ClutterBoxLayout:homogeneous property. » Implement retained clip stacks. » Support retained paths. » Add an experimental vector3 API. » Require GLib >= 2.18. » Require Atk >= 1.7. » Make ClutterActor implement AtkImplementor, and allow retrieving an AtkObject from a ClutterActor. » Improve ClutterText's Pango layout caching mechanism. » Fix set up of the GLX_SGI_swap_control extension. » Fix EGLX backend. » Documentation fixes for Clutter and COGL. » Fix the conformance test suite by executing every test unit in a separate process. » Add platform-dependent defines for Cogl. » Update the MingW cross-compilation script. » New recipe in the Cookbook. Many thanks to: Neil Roberts Robert Bragg Øyvind Kolås Owen W. Taylor Brian Tarricone Damien Lespiau Adel Gadllah Chris Lord Fridrich Strba José Dapena Paz Jussi Kukkonen Rob Bradford Clutter 1.2.2 (15/03/2010) =============================================================================== • List of changes since Clutter 1.2.0 » Fix introspection annotations for ClutterBox » Compilation fixes for the EGL native backend » Fix ClutterX11TexturePixmap ::queue-damage-redraw default handler registration to avoid a run-time warning » Handle TEXTURE_RECTANGLE_ARB in the 2D sliced textures, and add a test case for that extension to avoid regressions » Improve the strictness of the JSON parser in the internal copy of JSON-GLib to which we fall back in the absence of the system one » Fix a crasher on NVidia drivers when enabling the ARGB visuals by default on GLX. Many thanks to: José Dapena Paz Neil Roberts Owen W. Taylor Øyvind Kolås Clutter 1.2.0 (02/03/2010) =============================================================================== • List of changes since Clutter 1.1.14 » Improve the Animator API for consistency, and the implementation to match the intended behaviour, as documented » Add initial (and internal) support for queueing clipped region updates and let the GLX texture-from-pixmap actor take advantage of it » Support any pixel format in cogl_read_pixels() » Conditionally use G_VALUE_COLLECT_INIT() in functions using variadic arguments lists » Consistently use :min-width and :min-height inside the Stage to define the minimum size of the Stage window » Implement the Scriptable interface for ClutterModel sub-classes; this allows setting ClutterModel columns (both types and names) in ClutterScript definitions » Add support for unsigned integer indices in the VertexBuffer API » Documentation fixes for Clutter: the coverage is now 100% » Fixes for the EGL native backend » Require libtool >= 2.2.6 » Improve tests coverage Many thanks to: Neil Roberts Øyvind Kolås Robert Bragg Bastian Winkler Chris Lord Owen W. Taylor Clutter 1.1.14 (24/02/2010) =============================================================================== • List of changes since Clutter 1.1.12 » Fix interaction between user resizable Stages and fullscreen on X11 » Define the semantics of ENTER and LEAVE events when actors are on the border of the Stage window » Take the InputDevice of an event into consideration when throttling MOTION events » Round the coordinates when clipping to a rectangle in window coordinates » Always trust the user-provided coordinates when creating a CoglTexture from a foreign GL texture » Split Clutter's debug annotations from the pick and paint mode behavioural modifiers » Improve the usage of the CLUTTER_ACTOR_NO_LAYOUT flag so that every actor using a ClutterFixedLayout manager will automatically benefit from it » Fix the packing order of ClutterBox so that the convention of first-in-first-painted is maintained » Documentation fixes Many thanks to: Robert Bragg Chris Lord Neil Roberts Clutter 1.1.12 (16/02/2010) =============================================================================== • List of changes since Clutter 1.1.10 » Fix compilation on 64bit platforms » Fix some races of the Stage resizing on X11 » Documentation fixes for Cogl: the coverage is now 100% » Fix rounding errors in the preferred height of the ClutterText actor » Remove redundant type checks in clutter_actor_get_paint_opacity() » Add support for the GLX_INTEL_swap_event extension; when using this extension on GLX the glXSwapBuffers() call becomes non-blocking and Clutter will use an event to control the master clock. » Improve consistency between ClutterBox and ClutterGroup. » On X11, do not set the _NET_WM_PID and WM_TITLE properties on a Stage X window if the window was not created by Clutter itself » Improve caching of GL constant values » Optimize creating sub-textures of sub-textures » Various fixes for the atlas and the journal » Disable the atlas if FBOs are not supported Many thanks to: Robert Bragg Neil Roberts Damien Lespiau Bastian Winkler Chris Lord Clutter 1.1.10 (09/02/2010) =============================================================================== • List of changes since Clutter 1.1.8 » Fixed a regression in textures that caused all the textures to be drawn as white rectangles. » Fixed compilation with the Sun C compiler. » Use SSE2 instructions to premultiply RGBA images, if available. » Improve readability of ClutterActor::raise/::lower warnings. Many thanks to: Neil Roberts Halton Huo Clutter 1.1.8 (08/02/2010) =============================================================================== • List of changes since Clutter 1.1.6 » Added ClutterAnimator, a class that allows defining complex implicit animations involving multiple actors and states; this class is mostly meant to be used through the ClutterScript definition format, but it provides a convenience C API for easily building animations. » New experimental COGL API to expose "hardware" buffers such as PBOs or drm surfaces. This API can be used, for instance, to make texture uploading faster. » Fixed the issues with resizable stages getting a 1x1 window with the X11 backends » Expose input devices for every event; by default, X11 and Windows backends expose the core devices only. » Add the ClutterStage:key-focus property, for key focus tracking. » Allow setting transformable value types in ClutterAnimation when calling clutter_animation_bind() and clutter_animation_update(). » Delay the creation of the default Stage until clutter_stage_get_default() is actually called; this reduces the work of clutter_init(). » Implement Ctrl+Delete and Ctrl+Backspace in ClutterText » Improve the extendability of CoglTexture with internal backends. » Add implicit texture atlasing; Cogl will try to put every texture inside the same texture atlas by default, to avoid state changes in the driver and (hopefully) improve performance. » Fix notification of the cursor and selection changes in ClutterText; this improves the usage of Clutter from A11Y toolkits. » Do not wait for a frame if the system clock goes backwards. » Fix the dirtying of the clip state; this unbreaks cogl_path_fill(). » Documentation and build fixes. Many thanks to: Neil Roberts Chris Lord Damien Lespiau Alejandro Piñeiro Jussi Kukkonen Kristian Høgsberg Robert Bragg Øyvind Kolås Clutter 1.1.6 (18/01/2010) =============================================================================== • List of changes since Clutter 1.1.4 » Some fixes for the Win32 backend (bug #1905). » Profiling support via the UProf library. Configure with --enable-profile to get a report after each Clutter application is run. » Improved conformance tests with coverage reports via gcov. » ClutterTexture no longer tries to read back texture data into g_malloc'd memory on unrealize (bug #1842). » The CGL_• defines from cogl-defines.h have been removed. These should not have been used by any applications, but if they were being used then please replace them either with the Cogl enums or with the appropriate GL_• enum if you are using GL directly. » Added a delete-event signal to the stage. » Fix for using cogl_rectangle with different texture coordinates for multiple layers (bug #1937). » Fix for using stencil and depth buffers in FBOs on Intel drivers in Mesa (bug #1873). » Support for subtitles in ClutterMedia. » ClutterGLX will now use an RGB visual by default. For applications (and toolkit integration libraries) that want to enable the ClutterStage:use-alpha property there is a new function: clutter_x11_set_use_argb_visual(). » Fix ClutterText to allow using Pango markup and attributes in the same actor (bug #1940). Many thanks to: Alejandro Piñeiro Damien Lespiau Emmanuele Bassi Gord Allot Halton Huo Robert Bragg Samuel Degrande Clutter 1.1.4 (03/01/2010) =============================================================================== • List of changes since Clutter 1.1.2 » Update the ClutterScript parser to be more resilient, and support constructor and ChildMeta properties. The parser also respects the order of the properties in the UI definitions when applying them, and will apply the properties of an Actor after building the scene graph. » Simplified the implementation of LayoutManager sub-classes, and added support for animating a layout manager. » Allow short-circuiting some layout operations by setting a specific flag on ClutterActor. » Improve caching of the preferred size of a ClutterActor. » Allow declaring "internal children" for a ClutterContainer implementation: the memory management of these actors will be deferred entirely to the Container. » Let the ClutterStage honour the :opacity property and the alpha component of the stage color. This requires support in the Clutter backend used. » Improve Windows and OSX backends. » Simplify the feature detection code for OpenGL; this also reduced the required OpenGL version to 1.2. » Improve the matrix stack handling code. The matrices can be debugged by using the COGL_DEBUG environment variable, assuming that Clutter was compiled with the right configure-time switch. » Improve COGL API for draw buffers, and for offscreen buffer support. » Add support for text direction to ClutterActor. » Documentation, introspection and build fixes. Many thanks to: Robert Bragg Neil Roberts Damien Lespiau Joshua Lock Bastian Winkler Rob Bradford Samuel Degrande Christian Persch Colin Walters Johan Bilien Raymond Liu Tim Horton Clutter 1.1.2 (23/10/2009) =============================================================================== • List of changes since Clutter 1.0 » Add ClutterLayoutManager, an abstract proxy class for easily writing layout management policies; also add ClutterLayoutMeta, a class for storing layout properties. » Add ClutterBox, a generic container actor that relies on a ClutterLayoutManager instance to manage the layout of its children. » Add the following layout managers: - ClutterFixedLayout - a layout manager implementing the policy used by ClutterGroup - ClutterBinLayout - a layout manager for packing actors as layers inside the same area, with per-actor alignment - ClutterFlowLayout - a layout manager arranging actors as a reflowing grid - ClutterBoxLayout - a layout manager arranging actors as a single line » Remove the requirement for the backend-specific implementation of ClutterStage to be a ClutterActor: a Stage implementation must only implement the ClutterStageWindow interface. This cleans up the backend code. » COGL source tree clean up and rationalization; COGL now knows the platform, and not only the driver (GL or GLES) so we can migrate part of the low-level backend code from Clutter to COGL where it makes sense. » Remove code duplication across whole COGL. » The GLES 2.0 driver for COGL, and the EGLX backend for Clutter have been fixed and confirmed working. » Add "dump-pick-buffer" to CLUTTER_DEBUG: this debug options dumps the contents of each pick() buffer into a PNG file, for debugging purposes. » Allow interpolating intervals of ClutterUnits for animating unit-based properties. » Increase strictness and correctness of the ClutterUnits grammar parser. » Add GValue transformation functions for ClutterPath to and from a string. » Fix word movement in ClutterText; implement GObject getter for :use-markup; emit notification for :position; decouple the :text property from the :use-markup property. » Do not queue redraws or relayouts on actors currently being destroyed. » Support #rrggbb and #rgb notations for ClutterColor. » Multiple bug fixes. » Provide _NET_WM_PID on the X11 stage implementation. » Documentation and Introspection annotation fixes. » Add test units for the ClutterActor size requesition. » Build fixes. » Use AM_SILENT_RULES if Automake 1.11 is detected, and fall back to Shave on older Automake versions. Many thanks to: Robert Bragg Damien Lespiau Neil Roberts Thomas Wood Owen W. Taylor Øyvind Kolås Götz Waschk Zhou Jiangwei Colin Walters Jonas Bonn Joshua Lock Jussi Kukkonen Samuel Degrande Vladimir Nadvornik Xu Li Clutter 1.0.0 (28/07/2009) =============================================================================== • List of changes since 0.9.8 » Allow per-stage disabling of motion event throttling; this should allow platforms or applications that require all the motion events not for drawing purposes to get them exactly like Clutter gets them from the windowing system. » Various documentation fixes. » Add per-word key navigation inside ClutterText. » Fix the RGB<->HLS conversion. » Various fixes for the OSX backend. » Various build-related fixes. Many thanks to: Geoff Gustafson Michael Mortensen Owen W. Taylor Clutter 0.9.8 (17/07/2009) =============================================================================== • List of changes since 0.9.6 » Add more introspection annotations for language bindings. » Fix a bug in clutter_animation_set_alpha(), which also broke the clutter_actor_animate_with_alpha() function. » Check if the stage requires a relayout before showing it; this fixes a bug in the X11-based backends, especially under compositing window managers, where a 640x480 window would flicker before the default stage was shown for the first time. » Performance fixes for Cogl. » Sliced textures were broken by the COGL journalling. » Use the redraw cycle when asynchronously loading textures from files. » Miscellaneous compilation fixes for the OS X and Windows backends. » Allow querying from within the paint function of an Actor whether the actor is currently being directly painted or by a Clone actor. » In the GLX backend, when using the non-implicit sync-to-vblank inside glXSwapBuffers(), call glFinish() to avoid potential tearing. Many thanks to: Colin Walters Evan Martin Marcos Owen W. Taylor Xu Li Clutter 0.9.6 (01/07/2009) =============================================================================== • List of changes since 0.9.4: » Allow the manipulation of the actor's transformation matrix, so that is is possible to apply additional transformations in a way that is compatible with the transformations already applied by the scene graph. » Fix a race in the X11 backend that happened between resizing the stage drawable and the call to glViewport(). » Merge the cogl-journal-batching branch; this branch implements batching the geometry of the elements of the scene graph before sending it to OpenGL, thus minimizing the number of state changes and improving the overall performance of Clutter-based applications. » Add more debugging states for Clutter and COGL, which allow the developer to track the state of the journal; to check the VBO fallback paths; to disable picking for reliable profiling; to disable software-side matrix transformations in favour of the driver/GPU ones. » Improve the ability to "break out" of COGL by using gl_begin/gl_end semantics; applications that drop into raw GL are, though, ignoring all the caching performed by COGL and might incur in performance issues. » Fixed the :load-async and :load-data-async properties of Texture by removing the unneeded G_PARAM_CONSTRUCT flag. » Added an initial migration guide that shows the porting process from older releases of Clutter to the 1.0 API; the first chapter deals with the migration from ClutterEffect to the new implicit animations API. » Fixed MT-safety for the master clock. Many thanks to: Ole André Vadla Ravnås Tim Horton Clutter 0.9.4 (19/06/2009) =============================================================================== • List of changes since 0.9.2: » Set the layout height in ClutterText, so that wrapping and ellipsization work correctly to fill all the allocated area. » Remove all the units-based API, and migrate all the positional and dimensional accessors to use floating point values when dealing with pixels. All the properties dealing with pixels now that a floating point value as well. » Add the ability to track wether an actor is going to be painted or not, using the "mapped" flag. This also allows Clutter to be more strict in the handling of the scenegraph, ensuring correctness and avoiding wasting resources on nodes that won't be painted. » Add debugging facilities for COGL, similar to those of Clutter; through them is also possible to have an on screen debugging mode that shows the boundaries of each rectangle sent to the GPU. » Rework "units" into real logical distance units that can be converted between millimeters, typographic points and ems into pixels. » Simplify the Animation class to avoid redundancy and the possibility of it going out of sync with the Timeline and Alpha instances it uses. » Move every operation into a single "master clock" source that advances the timelines, dispatches events and redraws the stages in a predictable sequence, thus avoiding unneeded redraws. The default is to follow the sync-to-vblank cycle, if it is supported by the drivers. » Cache the glyphs geometry into a vertex buffer object to avoid resubmitting too much information to the GPU. » Rework the behaviour of ClutterModel when a filter is applied. » Allow submitting premultiplied texture data; this removes the need for unpremultiplying data in CairoTexture. » Add a simple API for submitting blending and texture combining modes through a string description. » Move Timelines to pure time-based objects. » Lots of performance improvements. » Removal of all the deprecated API. » Removal of all the fixed point entry points. » Lots of documentation fixes - the coverage is now 99% of the exported 1600 symbols for Clutter and 80%+ of the 300 exported symbols for COGL. » Generate the GObject Introspection data for both Clutter and COGL at build time. » Build environment fixes. Many thanks to: Owen W. Taylor Thomas Wood Havoc Pennington Bastian Winkler Chris Lord Garry Bodsworth Rob Bradford Johan Bilien Jonas Bonn Raymond Liu Damien Lespiau Dan Winship Marc-André Lureau Robert Staudinger Tommi Komulainen Clutter 0.9.2 (16/03/2009) =============================================================================== Bastian Winkler (2): [media] Fix the interface cast macro Remove redundant declaration in clutter-text.h Chris Lord (1): [actor] Force a relayout on set_parent() Christian Persch (1): Bug 1429 - Redundant declaration in clutter-x11.h Colin Walters (3): Bug 1491 - Fix hardcoded lib path in .pc files Typo in clutter-win32.pc.in introduced by commit 24ce19383 [animation] Enhance the bind API Damien Lespiau (6): [gitignore] update gitignore files for tests/ [build] Beautify autotools' output [build] Add dolt [build] Fix interaction between shave, gtk-doc and libtool 1.x [build] Fix dist for the newly introduced m4 macro directory Update shave Emmanuele Bassi (111): Post-release bump to 0.9.1 [text] Merge the attributes with markup enabled [tests] Update the text-field interactive test Add Actor::create_pango_layout() [docs] Add clutter_text_set_markup() [clone] Allow cloning unparented actors [text] Use create_pango_layout() [text] Rename :alignment to :line-alignment [texture] Consolidate the quality to filter conversions [texture] Check if the material is valid [event] Extend KeyEvent for multi-input support [actor] Check out parameters before setting them [list-model] Make ClutterListModel subclassable Bug 1440 - Add clutter_get_current_event_time() [tests] Add TEST_CONFORM_SKIP() macro [tests] Add conformance tests for ClutterModel [ignore] Add the newly created conformance units [actor] Revert part of commit 402e022c [animation] Do not bind construct-only properties [x11] Add backend-specific get_current_event_time() Initialize a variable to avoid warnings [cogl] Add cogl_is_material to cogl-material.h [cogl] Provide GTypes for COGL types [texture] Use COGL_TYPE_HANDLE for the handle properties [docs] Clarify the set_cogl_texture() documentation Merge branch 'build-enhancements' [docs] Add a missing "return" annotation [build] Pass the -s switch to cmp Remove type functions for removed types [docs] Update the sections file [tests] Add TEST_CONFORM_TODO macro [build] Show pkg-config file being generated [build] Reference the headers with their full path [docs] Update build for COGL API reference [build] Update the EXTRA_DIST list [build] Fix the ChangeLog generation rule [build] Do not overwrite BUILT_SOURCES [behaviour] Do not notify empty behaviours [path] Do not accept NULL descriptions [timeline] Set the n_markers out paramater Do not use GL types in Clutter headers [docs] Require gtk-doc 1.11 [docs] Use the --name-space option [docs] Add the 1.0 symbols index [docs] Rename cogl-docs from sgml to xml Add build machinery for gobject-introspection data [backend] Update the viewport when updating the GL context [build] Move all the compiler flags to AM_CFLAGS [ignore] Update with the introspection files Add runtime debug messages for COGL [actor] Remove usage of ClutterFixed Make disable text mipmapping a command line switch Make fuzzy picking a command line switch [docs] Document envvars and command line switches Remove stray fixed point macro usage Use a dynamic array for the actors when delivering events [media] Add sub-second resolution for the duration [build] Put the X11 pc dependencies in another variable [build] Do not shave typelib generation Intern the ClutterScriptable type name [backend] Constify font options [cogl] Add a PANGO debug flag for CoglPango use Clean up of the ClutterColor API [shader] Unify code paths Add pkg-config file for COGL [build] Various fixes for distcheck [docs] Clarify clutter_actor_animate() behaviour [docs] Note that grabs are evil [cogl-fixed] Add a double-to-fixed conversion macro Move BehaviourScale to CoglFixed Move ClutterBehaviourEllipse to CoglFixed Move ClutterBehaviourRotate to CoglFixed Move ClutterTimeline to CoglFixed [cogl-fixed] Implement the CoglFixed fundamental GType [tests] Test CoglFixed, not ClutterFixed [interval] Update fixed-point handling [stage] Coalesce fog and perspective API [texture] Fix ClutterFixed usage [text] Convert units to the right type [tests] Use floats, not ClutterFixed [units] Add more conversion functions [fixed] Remove ClutterFixed API [cogl] Fix hardcoded paths in the pc file [docs] Remove ClutterFixed from the documentation [docs] Update API reference [animation] Add vector variants for ::animate() [cogl] Initialize boolean flag in CoglContext [cogl] Initialize all members of CoglContext [color] Fixed HLS to RGB conversion [docs] Calling g_object_ref() will not dispose an object [docs] Document the commit message format [tests] Animate the color during easing [docs] Reword some of the coding practices [docs] Add a bindings coding practices Add more deprecation notices [deprecated] Add Effect deprecation Do not cause more size requisitions than necessary [cogl] Avoid shadowing math.h symbols [docs] Clarify Animation memory management [animation] Add an emitter for ::completed [animation] Add Animation getter [tests] Remove unused variables [docs] Add description of queue_redraw [docs] Update after Animation API changes [animation] Enhance consistency of the Animation API [docs] Bring down the undocumented symbols to 2% Fix release date of 0.9.0 Update release notes [docs] Fix naming of the interval parameter [docs] Ignore the TimeoutInterval internal API Update release notes Geoff Gustafson (1): [animation] Broken fixed:: properties Gordon Williams (1): [group] Output the group name when debugging paint Havoc Pennington (4): Virtualize GL matrix operations and use a client-side matrix when GL is indirect [actor] Add :clip-to-allocation property [actor] Add ::queue-redraw signal [cogl] Flush matrix before clip planes Jonathan Matthew (1): Declare the EnumValues for PixelFormat static Neil Roberts (36): [cogl-material] Always bind the new texture handle Fix building GLES 2 after the material branch merge [cogl-texture] Fix the count for the number of enabled arrays [cogl-gles2-wrapper] Remove the FIXME to adjust the fragment color [clutter-clone] Override the parent opacity to self not self->parent [clutter-texture] Release the temporary ref taken when setting a texture [clutter-texture] Unref the Cogl material on dispose [clutter-texture] Fix the no_slice property [cogl-texture] Fix offset to next quad when flushing the log [cogl-texture] Move the destruction of the material to _finalize [cogl-texture] Fix uninitialised priv var in texture_finalize Added a test for non-power-of-two sized textures Emit CLUTTER_LEAVE events when the pointer leaves the stage Call glActiveTexture and glClientActiveTexture through cogl_get_proc_address [win32] Track mouse leave messages [clutter-main] Fix the input device passed to set_motion_last_actor Override the opacity when painting a clone instead of combining Allow rotation angle properties to be negative [ClutterBehaviourRotate] Fix up some breakage from the cogl-float branch merge [tests/conform] Copy in redhand.png Replaced ClutterFixed constants in color_{darken,lighten} with float [cogl-gles2-wrapper] Convert texture unit settings to be a static sized array [cogl-gles2-wrapper] Actually call glActiveTexture Add an environment variable to disable mipmapped text [tests/tools] Don't install libdisable-npots.so [clutter-texture] Use a GThreadPool for loading async textures [cogl-pango-glyph-cache] Fix compiler warning on 64-bit Fix warning in clutter-backend-sdl [eglnative] Add -I flags for the clutter dir in the src and build dirs Set the mapped flag on the stage in the SDL and eglnative backends Fix out of tree builds Remove use of $(builddir) [README] Small typo fix Change cogl_path_rectangle and cogl_path_round_rectangle to take x1,y1,x2,y2 [cogl-path] Minor fix to gtk-doc Count timeline frames using the FPS instead of an integer interval Owen W. Taylor (7): Honor ACLOCAL_FLAGS in autogen.sh Add gobject-introspection annotations Fix x/y confusion for GL_TEXTURE_RECTANGLE_ARB Use COGL to establish GL state for ClutterGLXTexturePixmap Add (out) annotations for ClutterActor Allow NULL for clutter_text_set_text() Avoid drawing twice if relayout queues a draw Raymond Liu (2): [text] Crash when multi-byte utf8 text exceeds max_length [text] Insertion of multi-byte characters broken Robert Bragg (28): [Cogl] Renames cogl_fog_set to cogl_set_fog for consistency [cogl-material] Fixes some dirty flag checks [cogl-vertex-buffer] Some fixes for texturing and color arrays [docs] Various gtk-doc updates for Cogl [tests] Some improvements for test-pixmap [Cogl] cogl_clip_{set•,unset} renamed to cogl_clip_{push*,pop} [Cogl] Renames cogl_paint_init to cogl_clear and adds a cogl_disable_fog function [cogl-color.c] #include fix for the cogl_set_source_color prototype [Cogl] the cogl_get_•_matrix functions now work with CoglMatrix types [Cogl] Fixes automatic handling of the GL blend enable state. [cogl-material] Always glBindTexture when flushing material state [Cogl] Remove a debugging assert that was triggering on false positives [test-vertex-buffer-contiguous] Improves the texturing test [cogl-matrix] Adds padding to CoglMatrix [cogl-matrix] Documents that CoglMatrix members should be considered read only Removes need for casting (const float •) to (GLfloat *) in _cogl_set_clip_planes 80 char fix Avoid casting CoglMatrix to a GLfloat • when calling glGetFloatv Explicitly make the modelview-matrix current in cogl_{rotate,transform,etc} Use Cogl enum when making modelview-matrix current in cogl_{rotate,transform,etc} Finish GLES{1,2} support for client side matrix stacks Maintain the Cogl assumption that the modelview matrix is normally current Merge branch 'cogl-client-matrix-stacks' [cogl-vertex-buffer] Add a flush of attribute changes in the •_draw() functions [cogl-vertex-buffer] Allow querying back the number of vertices a buffer represents [cogl-vertex-buffer] fix cogl_vertex_buffer_draw_elements prototype [tests] Adds an interactive cogl vertex buffer unit test [cogl] Don't endlessly print the same warning regarding layer fallbacks Robert Staudinger (1): [build] Add cogl.h to the built sources list Shane Bryan (1): Bug 1434 - _NET_WM_NAME not set before realize Tomas Frydrych (3): Fixed handling of enter and leave events in clutter_x11_handle_event() Fix clutter_x11_texture_pixmap_get/set_property() following change of PROP_WINDOW type [x11] Only update cached last event time if we have a real timestamp. Øyvind Kolås (11): Added a mutex for clutter asynchronous textures threads. Bail early in clutter_texture_paint if opacity == 0 Add a warning for recursive emit_event Change the default size of thread pool from 3 to 1 [tests] Added test-texture-async [clutter-texture] add option to not block on size for loaded images [clutter-texture] remove load-size-async property Merge commit 'origin/async-texture-thread-pool' into async-size [clutter-texture] updated documentation. [clutter-texture] fixed gtk-doc formatting, and init threads in test. Merge branch 'async-texture-thread-pool' Clutter 0.9.0 (30/01/2009) =============================================================================== • List of changes between 0.8.6 and 0.9.0 » ClutterText is a new actor allowing text display, text editing both in multi-line and single-line modes, and text selection using the pointer devices and the keyboard. ClutterText supercedes both ClutterLabel and ClutterEntry. » ClutterClone is a new actor that allows cloning of other actors, both simple and composite. ClutterClone supercedes ClutterCloneTexture. » ClutterBindingPool is a new API that allows to easily add key bindings to an actor. » ClutterAnimation is a new API for implicit animations, similar to the tweening API used in toolkits like jQuery, Tween and Flash. This new API supercedes the ClutterEffect API. » ClutterAlpha uses "animation modes" instead of raw function pointers; it is still possible to pass alpha functions. The alpha functions provided by Clutter have been removed from the public API. It is possible to register global alpha functions and use them though a logical id. » The interval of the ClutterAlpha:alpha property has been changed to a floating point value in the [ -1.0, 2.0 ] range; this allowed the addition of "overshooting" easing modes. » COGL now supports backface culling. » The COGL-based Pango renderer is public API and it is accessible to developers. It is also possible to access the PangoContext used by Clutter in order to create PangoLayouts to render text. » The ClutterFixed API has been moved to COGL. » COGL does not depend on Clutter data types anymore. » The ClutterMedia interface has been overhauled: implementations now must only override the interface properties. The ranges of some properties have been changed to normalized values. » COGL now exposes only floating point entry points, and reserves the eventual conversion to fixed point only when needed. The fixed point type and macros are publicly available for developers concerned about floating point operations. » COGL has a new Vertex Attribues API that allows submitting an extensible number of vertex attributes to OpenGL in a way that does not require format conversions and allows fast re-use. » COGL has a new Material API that decouples paths from fills; it is possible to create an arbitrary path and fill it with a COGL texture. The Material API also allows setting multiple texture layers and defining the blend modes and colors. » ClutterTexture has the ability to use a worker thread to asynchronously load an image from a file, as long as the GLib threading support has been enabled prior to calling clutter_init(). » Clutter now supports localization of the help output, and it also supports globally setting the text direction for non left to right locales. » ClutterCairoTexture is a new actor that allows using Cairo to draw on a ClutterTexture; since Cairo does not have an OpenGL backend, the drawing is not hardware accelerated. » Clutter has a unit testing suite, based on the GLib unit test framework, which can be used to track regressions. » A ClutterPath object has been added, and it is used by the BehaviourPath. The Path object allows defining paths using a set of coordinates and operations. A Path can be "painted" either using COGL primitives or using Cairo primitives, allowing an easier way to paint non-rectangular shaped actors. » ClutterInterval is a simple object, used by ClutterAnimation, that describes an interval between two values, and interpolates between the initial and final values of the interval. • List of bugs fixed since 0.8.6 » #835 - Optimize clutter_actor_real_pick() » #851 - setting anchor point causes picking problem » #883 - Outstanding COGL merge issues » #1003 - Add clutter_actor_take_key_focus » #1014 - Clutter Animation API Improvements. » #1049 - Clutter doesn't support most GLSL uniforms » #1051 - WebKit/Clutter product/component? » #1058 - Build clutter-box2d with Clutter 0.8 » #1066 - Clipping regression in 0.8 » #1086 - virtualize stage_queue_redraw » #1105 - low level access to PangoClutter » #1106 - ClutterText instead of ClutterLabel and ClutterEntry » #1108 - Enter/Leave events logics wrt. skipped motion events » #1109 - clutter-0.8.0 fails to compile » #1123 - Crash when FBO actor is used and the stage is MINIMIZED » #1144 - Provide an option to load images asynchronously in ClutterTexture » #1162 - Add unit testing for Clutter » #1164 - Mesh API » #1172 - Disjoint paths and clip to path » #1189 - Backface culling » #1209 - Move fixed point API in COGL » #1210 - Add CoglColor API » #1211 - Drop ClutterFeatureFlags usage from COGL » #1212 - Allow only a single include file for Clutter » #1215 - Move the Pango renderer to the public API » #1219 - Clean up cogl.h » #1231 - Build fails in gles flavour in revision 3442 » #1233 - CLUTTER_ALPHA_SINE_INC is broken in trunk » #1251 - Merge the Cairo texture actor in core » #1252 - Merge ClutterBehaviourPath and ClutterBehaviourBspline » #1261 - [patch] Minimize differences between gl/cogl-texture.c and gles/cogl-texture.c » #1269 - mingw32 building failed at clutter-media.c » #1270 - Update to mingw-cross-compile.sh » #1271 - mingw compiling failed: undefined reference to `_glDrawRangeElements@24' » #1284 - Return something reasonable from clutter_x11_handle_event() » #1300 - clutter_score_remove and clutter_score_remove_all are different in object remove » #1310 - font rendering problem » #1313 - Fix computation of camera distance » #1314 - clutter_sinx() is more inaccurate than it needs to be » #1321 - Get Matrix in float » #1323 - ClutterBehaviorDepth conflicts with other behaviors » #1325 - ClutterPath to cairo_path_t conversion functions » #1330 - We should not queue redraw for non-visible actors » #1334 - Default value for ClutterLabel::text should be "" instead of NULL » #1344 - clutter_actor_transform_stage_point gives invalid coordinates for big actors » #1352 - Weird cogl-pango.h includes in clutter-[entry|label].c » #1354 - Floating point exception when set fps>1000 and start timeline » #1361 - Unused ClutterStage::get_resolution() methods » #1365 - ClutterEntry doesn't get the cursor when it should » #1366 - disable-npots fails to build on mac » #1380 - Return booleans from CLUTTER_ACTOR_IS_• macros » #1386 - Wrong clipping dimensions for larger actors » #1387 - Clarify new-frame signal emission with advance() » #1388 - Clarify signal emission for advance_to_marker() » #1395 - behaviour_apply and behaviour_get_nth_actor are opposite on actors sequence » #1397 - clutter command line is not localized. » #1402 - Change default tile-waste from 64 to 63 » #1403 - ClutterMedia::get_uri() should return allocated string » #1404 - ClutterMedia issues » #1405 - Fix properties that have X11 types to be 'long' » #1409 - Use G_SIGNAL_RUN_LAST with ::queue-redraw signal » #1410 - [patch] Implements a generic ClutterActorClone class without fbos » #1414 - avoid relayout of ClutterTexture if not syncing size » #1415 - short-circuit setting same clip again Clutter 0.8.2 (25/09/2008) =============================================================================== • List of changes between 0.8.0 and 0.8.2 » Add constructor-only properties for the :container and :actor properties of ClutterChildMeta » Resync the Clutter keysyms with X.org ones. » Documentation fixes and improvements » Allow defining ClutterColor as an object or an array inside ClutterScript UI definitions » Added the missing :perspective property to ClutterStage » Fixed the upper and lower boundaries for ClutterUnit and ClutterFixed properties » Fix a bug that prevented disabling sorting on ClutterModel » Fix a bug in clutter_timeline_list_markers() » Queue a redraw when the clip is changed » Optimize calls to push and pop the matrix when painting » Add a variable to the pkgconfig file for extracting the COGL backend, for configure-time checks » Fix a typo in cogl_path_rel_curve_to() » Fix showing the cursor after it being hidden once » Add a function for obtaining Clutter's option group without initializing Clutter • List of bugs fixed since 0.8.0 » #856 - Teardown sequence is borked » #945 - Clipping+fbo cloning bugs » #1010 - ClutterLabel does not update the layout (again) » #1020 - TFP resyncing on MapNotify/ConfigureNotify [Andy Wingo] » #1033 - Manually parsing command line options prevents initializing clutter » #1034 - Picking doesn't work on Eee PC » #1038 - Clutter 0.8 won't build due to redefined functions » #1044 - cogl_get_viewport error » #1047 - API documentation from release tarball is not installed by "make install" [Mirco Müller] » #1048 - SIGFPE in cogl_texture_set_region() with nvidia [Gwenole Beauchesne] » #1062 - clutter_actor_query_coords() replacement in 0.8 [Gwenole Beauchesne] » #1069 - Warnings with ClutterScore » #1071 - clutter_timeline_get_duration doesn't always work » #1075 - Difficult to bind clutter_stage_new » #1080 - clutter_stage_read_pixels has upside-down y coordinate » #1082 - Texture bitmap is destroyed in wrong way » #1085 - Cursor is in wrong position on ClutterEntry if set x-align property » #1090 - Label somtimes returns natural_width < min_width [Johan Bilien] » #1091 - WM_MOUSEWHEEL (scroll-event) not handled correctly [Roman Yazmin] » #1099 - No ClutterScript API to get a list of IDs in a given file [Noah Gibbs] » #1100 - WM_SIZE not handled correctly, user_resize and window_style correction » #1103 - Two typos in clutter documentation » #1121 - Setting anchor point doesn't work if set too early » #1124 - Clutter causes an additional size request in each allocation [Johan Bilien] » #1125 - Save an extra pango_layout_get_size in many cases [Johan Bilien] » #1130 - CLUTTER_MOTION is not emitted when time goes backwards. [Pierce Liu] » #1137 - Setting the anchor point does not trigger a re-paint » #1145 - Flicker on resize the window » #1154 - clutter_timeout_pool_new() documentation doesn't say how to free [Murray Cumming] Clutter 0.8.0 (10/07/2008) =============================================================================== • List of changes between 0.7.6 and 0.8.0 » Assume that non-power-of-two sized textures are always supported if texture-from-pixmap support is present. » Increase documentation coverage. » Disable the XINPUT support by default. » Improve the behaviour of clutter_actor_get_transformed_size(). » Fix a copy-and-paste bug which broke the vertex shaders. • List of bugs fixed since 0.7.6 » #983 - cogl-bitmap-fallback.c compiler error/warning due to cast issue » #985 - MSC math.h / M_PI issue » #998 - clutter always captures X input events » #1000 - clutter-x11 should define gtypes for its enumerations » #1004 - Fix "edge-detect" shader » #1007 - Fix TFP fallback mechanism » #1008 - tfp still a bit borked » #1010 - ClutterLabel does not update the layout » #1011 - Fix TFP fallback mechanism (take 2) » #1012 - clutter_stage_read_pixels() has incorrect alpha data on some (most?) cards" » #1013 - Per device grabs are not obeyed in pointer device propagation. » #1015 - Cloning unparented actors with FBOs doesn't work with new layout code » #1016 - Changing window-redirect-automatic property after creating ClutterX11TexturePixmap doesn't work » #1019 - clutter-frame-source.h not included by clutter.h » #1022 - extern inline functions in clutter-fixed.h » #1033 - Manually parsing command line options prevents initializing Clutter Clutter 0.7.6 (27/06/2008) =============================================================================== • List of changes between 0.7.4 and 0.7.6 » Removed the ClutterBackend::get_display_size() and wrappers. » Verify that the vertex shaders are successfully compiled when binding them. » Increase safety of the ClutterGLXTexturePixmap • List of bugs fixed since 0.7.4 » #993 - Underline colors are sometimes wrong Clutter 0.7.4 (25/06/2008), "Killer Koi" =============================================================================== • List of changes between 0.7.2 and 0.7.4 » Fix the ClutterEntry actor after the clip API changes in COGL. » Update the shaders generated for GLES 2.0. » Add the ability to add search paths and look up files from ClutterScript. This allows defining directories to store the images to be loaded by a ClutterTexture. » Fix the GLES 1.1 support. » Warn if no usable pointer device are available on X11 backends. » Improve the request for the best pixel format on win32. » Fix a regression when sizing the ClutterStage on backends that only support fixed size stages; now setting any size will result in Clutter ignoring the request, like it happened in Clutter 0.6. » Add a method to ClutterBackend to retrieve the display size. » Fix clutter_sinx() for angles > CFX_2PI - CFX_ONE. • List of bugs fixed » #833 - ClutterEntry should clip glyphs rather than itself » #858 - Support for multiple devices (using XINPUT) » #879 - sampler2DRect used by test-shader.c doen't work with non-rect textures » #979 - Wrong call convension for SwapIntervalProc in win32 backend » #987 - clutter-event.c c99 variable declaration » #988 - cursor position wrong with multibyte invisible char » #989 - Add a search path for clutter script assets Clutter 0.7.2 (23/06/2008), "Kedoke" =============================================================================== • List of changes between 0.7.0 and 0.7.2 » ClutterTexture has a new :keep-aspect-ratio property; when it is set to TRUE the texture will return a preferred width maintaining the aspect ratio with the given height and a preferred height maintaining the aspect ratio with the given width. This allows to set the width or the height and have the texture automatically request the height or the width respectively while maintaining the aspect ratio of the original image. » Added XINPUT support on the X11 backends; this provides an initial support for multiple input devices. The API is X11-specific, and provides support for querying at run-time support for XINPUT, for getting a list of input devices and for getting the type of each input device. » The 'fruity' backend also features multiple device support. • List of bugs fixed » #816 - clutter_actor_request_coords() should take a const box. » #836 - Optimize clutter_label_query_coords() » #905 - Paint cursor directly » #918 - Group doesn't clip if it's children are clipped » #953 - Actors are not hidden before unrealized or disposed » #960 - PangoContext creation code should not be duplicated » #970 - clutter_actor_get_paint_area confusion » #971 - Minor ClutterActor cleanups » #972 - Better parenting » #973 - unreffing ClutterScore may segfault » #981 - clutter_stage_read_pixels temprow fix » #982 - __COGL_GET_CONTEXT MS compiler issue » #984 - pango_clutter_render_layout() declared void Clutter 0.7.0 (13/06/2008), "Booska" =============================================================================== • List of changes between 0.6 and 0.7.0 » COGL, the underlying GL abstraction layer in Clutter, has been completely rewritten from the ground up. Its no longer a conceptual hack but a documented, fully featured library pretty much in its own right. COGL abstracts over Open GL, Open GL ES 1.1 and now OpenGL ES 2.0, providing a smart uniform API over these libraries with various utility features such as texture tiling abstractions, paths and primitive rendering, FBO, shaders, etc. » Clutter now provides an experimental backend for the Apple(tm) iPhone and iPod Touch families of products. » The Windows platform is now natively supported instead of relying on the SDL libraries. The win32 backend is still experimental. » The X11 based backends now feature support for Actors that wrap external X drawables (i.e the texture-from-pixmap extension and fallbacks) » Clutter now seamlessly supports multiple stages on the backends that allow this feature. » The custom Pango renderer has been completely rewritten, now using the more modern and maintained PangoCairo (instead of FT2), and avoids nasty subclassing hacks, supports smooth fast scaling of text, has many edge case issues fixed and it still is very efficient (using a texture glyph cache). It is even a little bit faster. » Better texture support, timeline improvements, ClutterLabel and ClutterEntry improvements, and container child properties are among the new features - too many to fit in the NEWS file. • List of bug fixes » #358 - "window resizing doesn't show scaled stage" » #425 - "COGL enhancements" » #439 - "timing related pong lockup due to timeline_rewind somtimes being ignored by timeline_timeout_func" » #450 - "ClutterScore API enhancements" » #641 - "add markers to timelines" » #666 - "Large font size leads to missing ""W"" and wrong ""J"" character" » #713 - "texture from pixmap" » #791 - "default actors to visible" » #800 - "CLUTTER_ALPHA_EXP_INC overflows" » #804 - "clutter_actor_get_opacity returns composited alpha" » #810 - "100 % CPU load with clutter_main()" » #815 - "Split up request » #816 - "clutter_actor_request_coords() should take a const box." » #822 - "Fix clutter_actor_lower()" » #823 - "Clean-up GLism's in clutter-core (below cogl)" » #824 - "ClutterEntry should handle its own key events" » #825 - "Removes GLisms from clutter-main.c" » #831 - "configure.ac missing osx flavour help" » #834 - "add ability to set anchor in json" » #836 - "Optimize clutter_label_query_coords()" » #839 - "Crash if put cursor over topmost pixel" » #840 - "Implement prepare-paint and finish-paint signals." » #848 - "Events dispatch doesn't work in GLX Xephyr" » #850 - "Impossible to set ClutterRectangle border opacity to a value different from the surface opacity" » #857 - "cogl_color doesn't work in PowerVR PC Viewer" » #860 - "ClutterAlpha leaks" » #864 - "Allow instantiating and subclassing of ClutterStage" » #871 - "Two problems with closing stages" » #873 - "clutter_x11/glx_texture_pixmap issues" » #874 - "Clipping on GL ES" » #875 - "Clutter Label Issues" » #881 - "Timelines require precise system timing" » #882 - "Allow child properties for containers implementing the ClutterContainer interface" » #884 - "Add clutter_alpha_set_closure" » #889 - "Error when building clutter-ivan with eglx" » #891 - "assertion failed when test-behave exits" » #892 - "Incorrect results using rotation-[center|angle] properties" » #894 - "Artifacts with the pango renderer" » #900 - "clutter_actor_lower() and friends do not queue redraw" » #906 - "Implement timing of the events" » #908 - "Support transform from G_TYPE_INT to ClutterUnit" » #909 - "OSX: missing NULL pointer handling" » #910 - "OSX: missing memory pool" » #911 - "OSX: add multistage support" » #912 - "Invalid use of int• as parameter for glGetIntegerv" » #913 - "cogl fails to build on OSX" » #914 - "ClutterEntry is confused about characters vs. bytes" » #915 - "clutter_entry_set_max_length(-1) misbehaves" » #916 - "ClutterKeyEvent:unicode_value is ignored" » #919 - "Replacement pango renderer" » #927 - "Created ports for clutter » #928 - "Reparenting a child that itself is a container doesn't work" » #930 - "add support for quartz imagebackend" » #931 - "suspicious size allocation for pixel data" » #933 - ""X Error of failed request" when attempting to call clutter_actor_request_coords()" » #934 - "Update clutter-tutorial to build with clutter from svn trunk." » #947 - "Destroying a stage is messy" » #948 - "Remove texture rectangle support" » #950 - "AltGr not handled" » #951 - "Fix clutter_entry_init() in trunk" » #952 - "Fix test-textures in trunk" » #953 - "Actors are not hidden before unrealized or disposed" » #955 - "ClutterLabel is missing fallback resolution handling" » #959 - "Multiple minor improvements" » #960 - "PangoContext creation code should not be duplicated" » #961 - "Fails to build on OSX (query/request_coords is gone)" » #964 - """unrealized"" signal of ClutterActor wrongly named" Clutter 0.6.0 (18/02/2008) ========================== • List of changes between 0.5.6 and 0.6.0 » New documentation sections inside the API reference, describing the animation framework. » New API in ClutterActor for computing the actor's vertices in the plane of a given ancestor and accessors to query whether an actor is scaled or rotated • List of bug fixed » #613 - Extend point transformation API » #779 - Rounding error in ClutterBehaviourScale [Havoc Pennington] » #787 - tiled textures are broken » #796 - segmentation fault when setting label text Clutter 0.5.6 (11/02/2008) ========================== • List of changes between 0.5.4 and 0.5.6 » Reverted a last minute change in the depth sorting function of ClutterGroup. » Added the clutter_actor_move_anchor_point() family of functions, which will set the anchor point at the given coordinates while adjusting the actor postion so that the relative position of the actor toward its parent remains the same. » Provide a fallback for finding the Clutter alpha functions inside a UI definition for ClutterScript in case g_module_open() fails. » Add initial Frame Buffer Objects support in ClutterTexture; using FBOs, where supported by the hardware and drivers, it's possible to create a ClutterTexture from any actor. • List of bugs fixed » #386 - Stage is white unless a timeline is present » #439 - timing related pong lockup due to timeline rewind... » #440 - 1 pixel line flickering » #442 - Shader support » #451 - Improve font rendering quality (Pango) » #452 - Textures are shown with distortion on Solaris/SPARC » #526 - OSX backend » #533 - Clutter stage is not shown under some conditions » #540 - ClutterStage isn't always respecting requests to change size » #549 - Backend offscreen API is broken » #613 - Extend point transformation API » #635 - Fix buffer overflow in clutter_texture_get_pixbuf() [Gwenole Beauchesne] » #643 - Superfluous "filter-quality" setting in texture_upload_data()? [Gwenole Beauchesne] » #689 - Rotating actor through layers does not handle opacity correctly [Josh Stewart] » #710 - Make "box-blur" test shader work in some way [Gwenole Beauchesne] » #719 - X11 backend does not check window field in events [Havoc Pennington] » #724 - ClutterLabel reports wrong height when lines > 1 » #749 - "reactive" property does not change » #751 - missing XSync in clutter-event-x11.c:xembed_set_info() [Havoc Pennington] » #756 - clutter_actor_get_abs_size returns bogus values » #769 - OSX backend fails to build » #770 - OSX: passing incompatible pointer type Clutter 0.5.4 (25/01/2008) ========================== • List of changes between 0.5.2 and 0.5.4 » A clutter-x11-. pkg-config file is installed along with the clutter-. and clutter--. ones, for libraries and applications depending on the X11-based backends (GLX and EGLX). » Textures are correctly unrealized before changing and freeing the main GL context. » It is now possible to block the automatic call to clutter_main_quit() when closing the stage window using the frame controls by connecting an handler for the ::event signal on the Clutter stage and checking for the CLUTTER_DELETE event type and returning TRUE. This allows the usage of other main loops with GLib reactors (like Python's twisted) with Clutter without triggering assertions by closing the stage window. • List of bugs fixed » #564 - Add more precise clutter_qdivx() [Gwenole Beauchesne] » #614 - ClutterActor API inconsistencies » #640 - ClutterTexture unrealized with no GL context » #654 - Under heavy load clutter sometimes drops the last frame of a timeline [Johan Bilien] » #672 - Event handling in osx backend is broken [Tommi Komulainen] » #684 - Improve test-scale by also using anchor point [Jaap A. Haitsma] » #695 - clutter-shader: Invalid format string for gssize [Tommi Komulainen] » #696 - cogl_get_proc_address requires GLX [Tommi Komulainen] » #709 - clutter_effect_scale inconsistent with clutter_actor_set_scale » #714 - clutter_event_copy for enter/leave event generates extra unref [Neil Roberts] » #715 - Type errors in test-shader » #720 - BehaviourScale not working in python after recent API change [Josh Stewart] Clutter 0.5.2 (14/01/2008) ========================== • List of changes between 0.5.0 and 0.5.2 » ClutterModelDefault has been renamed to ClutterListModel » ClutterModel now has vector-based variants for append, prepend and insert methods; these methods are useful for bindings » Add units-based variant for clutter_actor_move_by() • List of bugs fixed » #694 - Handle GLhandleARB on OS X [Tommi Komulainen] » #700 - Fix for clutter_effect_rotate() [Neil Roberts] Clutter 0.5.0 (02/01/2008) ========================== • List of changes between 0.4.2 and 0.5.0 » New event handling system: every actor with the CLUTTER_ACTOR_REACTIVE flag set will receive events from the underlying backend; the event propagation chain will be walked in two directions (from the actor to the top-level container and back) with the ability to block it in both phases. » ClutterShader, an abstraction over the programmable OpenGL pipeline. » ClutterScore, an object for controlling timelines; using a score instance is possible to start multiple timelines at once, or start a timeline after another has emitted the ::complete signal. » ClutterScript, an object for parsing a scene from an external file or a buffer; the scene is described using JSON (JavaScript Object Notation): every object is defined using its class and properties, and container objects can have their children defined as well. It is also possible do describe top-level objects such as timelines and behaviours, and to automatically connect signal handlers to signal names. » ClutterTimelines duration can now be set in milliseconds using the :duration property; the default framerate will be used to compute the actual duration in frames. The default framerate will be set by the backend, and can be overridden by the application. » ClutterTimelines direction can now be set using the :direction property; a timeline can be set to proceed forward or backward, and the direction can also be change while the timeline is still running. » New, experimental OSX backend. » Build environment for MS VisualStudio 2005. » ClutterModel, a generic list-based model object that can be used to implement actors following the Model-Viewer-Controller design pattern. Clutter provides a default implementation of ClutterModel, called ClutterModelDefault and using the GSequence data structure from GLib to optimize insertion and look up. » Add the ability to grab pointer and keyboard events: if an actor is set to have a grab it'll be the only one receiving events until it releases the grab. » Add the ability for an actor to receive the key focus; an actor with key focus will always receive the key events, even if it did not acquire the keyboard grab. » It is now possible to set the GL "fog" (also known as "depth cueing") effect on the ClutterStage; if the fog is enabled, actors farther away from the view point will fade into the stage background color. » Each actor now has an "anchor point", a point defined in the actor's coordinate space that will be used as the origin when scaling and rotation transformations. » Every pixel-based API has been doubled with a corresponding ClutterUnits-based function (postfixed with a '-u'), for instance: clutter_actor_set_position() - clutter_actor_set_positionu() clutter_actor_set_size() - clutter_actor_set_sizeu() clutter_actor_set_depth() - clutter_actor_set_depthu() This allows sub-pixel precision and device independence. » The ClutterLabel actor now tries very hard to provide a sane default size, if no bounding box has been requested; this fixes the :alignment property and allows the addition of the :justify property. » The SDL backend can now be compiled under win32 with MingW; this backend is still marked as experimental. » The OSX backend allows the compilation of Clutter under OS X; this backend is experimental. • List of bugs fixed » #423 - All actors should emit events rather than just the stage » #424 - Interface definition files » #443 - ClutterModel implementation » #480 - Uninitialized variable in path_alpha_to_position() [Gwenole Beauchesne] » #511 - clutter_stage_get_actor_at_pos problem » #512 - clutter window moves when stage actor is scaled » #518 - XEMBED not supported in eglx backend » #519 - Should have an Atom cache initialized on start up » #520 - Delete after multibyte unicode chars in ClutterEntry [Tommi Komulainen] » #522 - Array out of bounds indexing [Tommi Komulainen] » #523 - cogl portability fixes [Tommi Komulainen] » #524 - missing config.h includes [Tommi Komulainen] » #525 - Redundant include in cogl/gl [Tommi Komulainen] » #531 - Extraneous "new-frame" signal generated » #532 - clutter_actor_set_scale_with_gravityx() precision [Gwenole Beauchesne] » #544 - clutter_color_to_hlsx is broken [Neil Roberts] » #546 - ClutterStageState doesn't make sense » #550 - Wanted: Set Actor's position based on center or other edges/corners of quadrangle » #557 - ClutterScript should support complex properties for third party classes » #558 - Unmerge UI definitions » #566 - ClutterEntry does not scroll the text to the right [Gwenole Beauchesne] » #577 - Inconsistent naming of behaviour properties » #580 - Fix call to cogl_enable() [Gwenole Beauchesne] » #582 - api naming inconsistence between clutter_behaviour_path_append_knots and clutter_behaviour_bspline_append » #584 - Typo on clutter_effect_rotate_x documentation page » #592 - Fix build on trunk [Gwenole Beauchesne] » #596 - ClutterTexture tileing logic is a little borked » #597 - ClutterGroups not pickable » #600 - fix ClutterLabel layout computing when no box has been set » #604 - Color param for Label constructor should be const [Jonathon Jongsma] » #606 - enable depth test in GL » #608 - Control motion events frequency » #614 - ClutterActor API inconsistencies » #616 - ClutterTexture doesn't respect width set from clutterscript » #617 - ClutterEffect Improvements » #618 - ClutterScript name/id confusion » #619 - clutter_behavior_rotate angle properties should accept negative values » #628 - clutter_actor_rotate_x() is a setter, not a modifier » #629 - There is no clutter_actor_get_position() » #634 - clutter_behaviour_path_new() documentation unclear » #637 - add depth cueing support to the stage » #645 - Fix crash in clutter_label_new_full() [Gwenole Beauchesne] » #647 - Cannot hide the stage » #648 - Hidden fullscreen stage doesn't come back as fullscreen » #652 - reference needed on actor being source of last motion_event » #661 - clutter_actor_set_width() documentation is vague » #662 - clutter_actor_set_opacity() documentation doesn't describe values » #665 - ClutterBehaviourEllipse tilts are broken » #670 - Fix clutter_container_lower_child() [Gwenole Beauchesne] » #673 - ClutterActor "captured-events" signal documentation wrong » #674 - ClutterActor::get_depth() and set_depth() vfuncs not used [Murray Cumming] » #675 - update subregions of cluttertextures » #678 - ClutterLabel size allocation still bogus Clutter 0.4.0 (07/08/2007) ======================== • List of changes between 0.3.1 and 0.4.0 » Many documentation additions and improvements. » Display DPI now honours on backends its can be queried. » Various big endian related fixes. » ClutterBehaviourEllipse and ClutterBehaviourRotate API and internals improvements. » Add basic tslib support to eglnative backend (for touchscreen events) » clutter_stage_get_actor_at_pos should now work on 16bpp displays. » New ClutterEffect rotation calls. » Allowing user resizing of the stage now optional. (implemented by glx backend only currently) » ClutterEntry UTF8 fixes and improved automatic initial sizing. » Make ClutterActor GInitiallyUnowned. » New ClutterBox API: each box has now a colour and a margin (distance between the inner-border and the children); plus, each packed child has a padding. Margins and paddings are expressed in ClutterUnits, to ease the transition to the device independent units. You can use clutter_box_set_default_padding() if you want the same padding for each child. • List of bug fixed » #390 - clutter_stage_get_actor_at_pos broken on 16bpp displays. » #398 - inconsistent type for return value of clutter_event_get_state » #403 - Critical error when removing texture actor » #404 - Solaris build error with OpenGL, missing GL_MAX_RECTANGLE_TEXTURE_SIZE_ARB and GL_TEXTURE_RECTANGLE_ARB » #409 - depth mismatch between visual (32) and window (24) » #407 - metadata-available signal #ifdef'ed out » #413 - Clutter compile error with Sun Studio C compiler » #426 - typo in sdl_backend » #414 - ClutterEntry invisible if size not set » #434 - clutter_color_from_pixel incorrectly interprets alpha value » #435 - clutter_color_subtract does the opposite of its documentation » #436 - clutter-behaviour-depth always perform "from deep to shallow" Clutter 0.3.1 (06/07/2007) ======================== • List of changes between 0.3 and 0.3.1 » EGL. There are now 2 experimental EGL backends; - 'eglx', the former EGL on X11 implementation (now renamed) - 'eglnative', a new EGL 'native' backend which supporting non X11 EGL implementations (i.e framebuffer). » ClutterGroup now returns correct size when a child is removed. » Missing redhand.png added to distro tarball (fixing tests that require it) » Fix picking in ClutterBox » Rectangle border creation fixed. » Fix overflow in Exponential Alpha funcs. » Many API documentation fixes and improvements. » ClutterEffect cleanups. » ClutterEntry cleanups. » Check for versioned XFixes library (GLX backend). » More X error traps in GLX backend. Clutter 0.3 (29/06/2007) ======================== • List of changes between 0.2.3 and 0.3 » Clutter now supports both switchable windowing system and GL backends. Window systems supported include GLX, EGL and SDL. GL support includes OpenGL 1.2+ and OpenGL ES 1.1. This is provided by a small basic abstraction layer 'cogl.h'. Cogl is not yet documented - usage external to Clutter is not yet advised. Backends may provide specific command line options. Notes; GLX --- The GLX backend is built by default and is currently the most developed, supported and featured windowing system backend. Only OpenGL is supported via GLX. SDL --- Clutter has experimental support for using SDL. Open GL is supported as is OpenGL ES via Dogles (very experimental). EGL --- Clutter has experimental support for using EGL. Only Open GL ES is supported by EGL. EGL support assumes an EGL implementation running atop X Windows. Open GL ES. ----------- Clutter now has experimental support for Open GL ES. Current known issues; + Unrealising a ClutterTexture will not move pixel data from video into system memory but simply destroy it. + BGRA, YUV Texture data not currently supported. (Use the clutter_feature API to probe for above at runtime) Open Source ES implementations this has been tested against include `Vincent' and `dgles'. Support for commerical implementations may require modifications to the configure.ac script. vincent: http://ogl-es.sourceforge.net/ (Also see: http://svn.o-hand.com/repos/misc/trunk/ogles/ ) dgles: http://developer.hybrid.fi/dgles/index.html » New ClutterEffect class provides a simplified (and thus less flexible) API wrapping around behaviours, alphas and timelines. » New Behaviours - bspline, ellipsis, rotation. » New built in Alpha functions; CLUTTER_ALPHA_SINE_INC CLUTTER_ALPHA_SINE_DEC CLUTTER_ALPHA_SINE_HALF CLUTTER_ALPHA_SQUARE CLUTTER_ALPHA_SMOOTHSTEP_INC CLUTTER_ALPHA_SMOOTHSTEP_DEC CLUTTER_ALPHA_EXP_INC CLUTTER_ALPHA_EXP_DEC » New Actors and interfaces + ClutterLayout, for writing extended layout support in actors + ClutterContainer, for generic container actors + ClutterBox, ClutterVBox and ClutterHBox layout actors. + ClutterEntry, text entry actor » ClutterTexture now handles BGRA, YUV and premultiplied alpha data. » All internal math now fixed point based. » Clutter now has it own internal event queue. » ClutterStage new features; + Title property for naming in window decorations. + Perspective setting - The stages perspective can now be modified. » New Clutter_actor •project API calls allow for querying of tranformed actor vertices and points. » New Clutter Feature checks. » Initial ClutterUnit implementation for device independant positioning. • List of Bugs fixed » Various issues with very poor performance and Intel drivers. » #138 Fix typo in x rotation transform. Clutter 0.2.3 (2007-04-11) ========================== • List of changed between 0.2.2 and 0.2.3 » Fixes to tile based textures and again clutter_texture_get_pixbuf(). [Matthew] » Implement Gravity for ClutterScaleBehaviour. [Matthew, Rob] Clutter 0.2.2 (2007-03-22) ========================== • List of changed between 0.2.1 and 0.2.2 » Addition of basic XEMBED support for clutter stage. [Matthew] » Fixes to clutter_texture_get_pixbuf(). [Matthew] » Export clutter_group_remove_all and add associated fixes. [Matthew] Clutter 0.2.1 (2007-02-07) ========================== • List of changed between 0.2.0 and 0.2.1 » Add even faster double to integer (and back) conversion functions. [Tomas] » Fix some errors in the fixed point sine waveform function. [Tomas] » Use fixed point math in the Pango renderer. [Tomas] » Improve the GL version check. [Matthew] » Add a square waveform function. [Emmanuele] • List of bugs fixed » #215 - macro CLUTTER_MARK() not disabled for non-debug builds Clutter 0.2 (18-01-2007) ======================== • List of changes between 0.2 and 0.1 » Bindings, GStreamer and GTK+ dependencies moved out of tree: now Clutter strictly depends on Xlibs, OpenGL and GdkPixbuf only. » Actors now have an initial floating reference; this means you don't have to explicitely unref them: every memory an actor allocates will be freed when the group containing the actor will be destroyed. » Add basic run-time detection of GL features. + Use GL_TEXTURE_RECTANGLE_ARB if available. + Attempt to set up sync to vblank (set CLUTTER_VBLANK=none to disable) » Add API for behaviours. A ClutterBehaviour is an object which drives a set of actors using one or more properties depending on the value of an "alpha" function. + Provide simple behaviours: ClutterBehaviourOpacity, ClutterBehaviourPath and ClutterBehaviourScale. + Provide simple alpha functions for ramps and sine waveforms. » Add fixed point API for embedded platforms with no FPU. » Add support for command line switches to Clutter, like debug flags and abort on warnings; also allow application to hook up into the initialisation sequence to add their own command line switches. » Add Pango GL renderer for Clutter, and use it to render text inside the ClutterLabel actor; this decrease texture memory usage. » Redo Clutter Label widget, using the new Pango renderer. » Clutter Textures do not store local pixbuf copy (of texture). » Redo group and actor scale/sizing API and functionality. » Add memory management API for ClutterColor, and string parsing. • List of bug fixed » #199 - Little group handling fix? » #198 - Detect NPOT support on more systems » #197 - Tiled textures are broken » #196 - Rebuild the examples when the library changes » #156 - clutter_actor_set_position not using the absolute size » #155 - Don't test for XInitThreads [Bastien Nocera] » #154 - Key presses not working in super-oh example [Bastien Nocera] » #152 - Misc fixes [Bastien Nocera] » #143 - Faulty ref-counting in clutter_group_remove [Frederic Riss] » #141 - Copy-pasto in clutter_media_set_volume [Frederic Riss] » #101 - No package 'x11' found -- wrong configure [Tomasz Torcz] » #98 - Enabling trails in super-oh crashes Clutter 0.1 (22/06/2006) ======================== • First 'official' release, expect bugs aplenty. • Contains: » Hopefully enough functionality to build things. » Basic gstreamer 0.10 video playback support. » Fairly stable API, though in no way totally stable. Expect CHANGES in future versions. » Some simple examples ( also see OPT ). » An experimental GTK-Clutter widget. » Fairly complete Python bindings. » Non complete but hopefully useful API documentation. • If you want to help out see the TODO file.