Clutter Coding Style ------------------------------------------------------------------------------- This document is intended to be a short description of the preferred coding style to be used for the Clutter source code. Coding style is a matter of consistency, readability and maintainance; coding style is also completely arbitrary and a matter of taste. This document will use examples at the very least to provide authoritative and consistent answers to common questions regarding the coding style, and will also try to identify the allowed exceptions. The examples will show the preferred coding style; the negative examples will be clearly identified. Please, don't submit code to Clutter that looks like any of these. Part of the rationales for these coding style rules are available either in the kernel CodingStyle document or in Cairo's CODING_STYLE one. When in doubt, check the surrounding code and try to imitate it. + Line width The maximum line width for source files is 80 characters, whenever possible. Longer lines are usually an indication that you either need a function or a pre-processor macro. + Indentation Each new level is indented 2 or more spaces than the previous level: if (condition) single_statement (); This can only be achieved using space characters. It may not be achieved using tab characters alone, or using a combination of spaces and tabs. Do not change the editor's configuration to change the meaning of a tab character (see below); code using tabs to indent will not be accepted into Clutter. Even if two spaces for each indentation level allows deeper nesting than 8 spaces, Clutter favours self-documenting function names that can take quite some space. For this reason you should avoid deeply nested code. + Tab characters The tab character must always be expanded to spaces. If a literal tab must be used inside the source, the tab must always be interpreted according to its traditional meaning: Advance to the next column which is a multiple of 8. [ these two lines should be aligned ] + Braces Curly braces should not be used for single statement blocks: if (condition) single_statement (); else another_single_statement (arg1); In case of multiple statements, curly braces should be put on another indentation level: if (condition) { statement_1 (); statement_2 (); statement_3 (); } The "no block for single statements" rule has only three exceptions: ① if the single statement covers multiple lines, e.g. for functions with many arguments, and it is followed by else or else if: /* valid */ if (condition) { a_single_statement_with_many_arguments (some_lengthy_argument, another_lengthy_argument, and_another_one, plus_one); } else another_single_statement (arg1, arg2); ② if the condition is composed of many lines: /* valid */ if (condition1 || (condition2 && condition3) || condition4 || (condition5 && (condition6 || condition7))) { a_single_statement (); } ③ Nested if's, in which case the block should be placed on the outermost if: /* valid */ if (condition) { if (another_condition) single_statement (); else another_single_statement (); } /* invalid */ if (condition) if (another_condition) single_statement (); else if (yet_another_condition) another_single_statement (); In general, new blocks should be placed on a new indentation level, like: int retval = 0; statement_1 (); statement_2 (); { int var1 = 42; gboolean res = FALSE; res = statement_3 (var1); retval = res ? -1 : 1; } While curly braces for function definitions should rest on a new line they should not add an indentation level: /* valid */ static void my_function (int argument) { do_my_things (); } /* invalid */ static void my_function (int argument) { do_my_things (); } /* invalid */ static void my_function (int argument) { do_my_things (); } Curly braces must not be placed on the same line as a condition: /* invalid */ if (condition) { statement_1 (); statement_2 (); } + Conditions Do not check boolean values for equality: /* invalid */ if (condition == TRUE) do_foo (); /* valid */ if (another_condition) do_bar (); Even if C handles NULL equality like a boolean, be explicit: /* valid */ if (some_pointer == NULL) do_blah (); /* invalid */ if (some_other_pointer) do_blurp (); In case of conditions split over multiple lines, the logical operators should always go at the end of the line: /* invalid */ if (condition1 || condition2 || condition3) { do_foo (); } /* valid */ if (condition1 && condition2 && (condition3 || (condition4 && condition5))) { do_blah (); } + Functions Functions should be declared by placing the returned value on a separate line from the function name: void my_function (void) { } The arguments list must be broken into a new line for each argument, with the argument names right aligned, taking into account pointers: void my_function (some_type_t type, another_type_t *a_pointer, final_type_t another_type) { } The alignment also holds when invoking a function without breaking the 80 characters limit: align_function_arguments (first_argument, second_argument, third_argument); To respect the 80 characters limit do not break the function name from the arguments: /* invalid */ a_very_long_function_name_with_long_parameters (argument_the_first, argument_the_second); /* valid */ first_a = argument_the_first; second_a = argument_the_second; a_very_long_function_name_with_long_parameters (first_a, second_a); + Whitespace Always put a space before a parenthesis but never after: /* valid */ if (condition) do_my_things (); /* valid */ switch (condition) { } /* invalid */ if(condition) do_my_things(); /* invalid */ if ( condition ) do_my_things ( ); A switch() should open a block on a new indentation level, and each case should start on the same indentation level as the curly braces, with the case block on a new indentation level: /* valid */ switch (condition) { case FOO: do_foo (); break; case BAR: do_bar (); break; } /* invalid */ switch (condition) { case FOO: do_foo (); break; case BAR: do_bar (); break; } /* invalid */ switch (condition) { case FOO: do_foo (); break; case BAR: do_bar (); break; } /* invalid */ switch (condition) { case FOO: do_foo (); break; case BAR: do_bar (); break; } It is preferable, though not mandatory, to separate the various cases with a newline: switch (condition) { case FOO: do_foo (); break; case BAR: do_bar (); break; default: do_default (); } The 'break' statement for the default: case is not mandatory. If a case block needs to declare new variables, the same rules as the inner blocks (see above) apply; the break statement should be placed outside of the inner block: switch (condition) { case FOO: { int foo; foo = do_foo (); } break; ... } When declaring a structure type use newlines to separate logical sections of the structure: struct _ClutterActorPrivate { /* fixed position */ ClutterUnit fixed_x; ClutterUnit fixed_y; ClutterRequestMode request_mode; /* requisition sizes */ ClutterUnit request_width_for_height; ClutterUnit request_min_width; ClutterUnit request_natural_width; ClutterUnit request_height_for_width; ClutterUnit request_min_height; ClutterUnit request_natural_height; ClutterActorBox allocation; ... }; Do not eliminate whitespace and newlines just because something would fit on 80 characters: /* invalid */ if (condition) foo (); else bar (); Do eliminate trailing whitespace on any line, preferably as a separate patch or commit. Never use empty lines at the beginning or at the end of a file. Do enable the default git pre-commit hook that detect trailing whitespace for you and help you to avoid corrupting Clutter's tree with it. Do that as follows: chmod a+x .git/hooks/pre-commit You might also find the git-stripspace utility helpful which acts as a filter to remove trailing whitespace as well as initial, final, and duplicate blank lines. + Headers Headers are special, for Clutter, in that they don't have to obey the 80 characters limit. The only major rule for headers is that the functions definition should be vertically aligned in three columns: return value function_name (type argument, type argument, type argument); The maximum width of each column is given by the longest element in the column: void clutter_type_set_property (ClutterType *type, const gchar *value, GError **error); G_CONST_RETURN gchar *clutter_type_get_property (ClutterType *type); It is also possible to align the columns to the next tab: void clutter_type_set_prop (ClutterType *type, gfloat value); gfloat clutter_type_get_prop (ClutterType *type); gint clutter_type_update_foobar (ClutterType *type); Public headers should never be included directly: #if !defined(__CLUTTER_H_INSIDE__) && !defined(CLUTTER_COMPILATION) #error "Only can be included directly." #endif Public headers should also have inclusion guards (for internal usage) and C++ guards: #ifndef __CLUTTER_HEADER_H__ #define __CLUTTER_HEADER_H__ #include G_BEGIN_DECLS ... G_END_DECLS #endif /* __CLUTTER_HEADER_H__ */ + GObject GObject classes definition and implementation require some additional coding style notices. Typedef declarations should be placed at the beginning of the file: typedef struct _ClutterActor ClutterActor; typedef struct _ClutterActorPrivate ClutterActorPrivate; typedef struct _ClutterActorClass ClutterActorClass; This includes enumeration types: typedef enum { CLUTTER_REQUEST_WIDTH_FOR_HEIGHT, CLUTTER_REQUEST_HEIGHT_FOR_WIDTH } ClutterRequestMode; And callback types: typedef void (* ClutterCallback) (ClutterActor *actor, gpointer user_data); Instance structures should only contain the parent type and a pointer to a private data structure, and they should be annotated as "private": struct _ClutterRectangle { /*< private >*/ ClutterActor parent_instance; ClutterRectanglePrivate *priv; }; All the properties should be stored inside the private data structure, which is defined inside the source file - or, if needed, inside a private header file; the private header filename must end with "-private.h" and must not be installed. The private data structure should only be accessed internally using the pointer inside the instance structure, and never using the G_TYPE_INSTANCE_GET_PRIVATE() macro or the g_type_instance_get_private() function. Always use the G_DEFINE_TYPE(), G_DEFINE_TYPE_WITH_CODE() macros, or their abstract variants G_DEFINE_ABSTRACT_TYPE() and G_DEFINE_ABSTRACT_TYPE_WITH_CODE(). Avoid forward declaration for functions: use the G_DEFINE_* macros right after the private types, variables and macros declarations. Interface types should always have the dummy typedef for cast purposes: typedef struct _ClutterFoo ClutterFoo; The interface structure should have "Iface" postfixed to the dummy typedef: typedef struct _ClutterFooIface ClutterFooIface; Interfaces must have the following macros: - Macro: - Expands to: • CLUTTER_TYPE_ _get_type • CLUTTER_ G_TYPE_CHECK_INSTANCE_CAST • CLUTTER_IS_ G_TYPE_CHECK_INSTANCE_TYPE • CLUTTER__GET_IFACE G_TYPE_INSTANCE_GET_INTERFACE + Memory allocation When dynamically allocating data on the heap either use g_new() or, if allocating multiple small data structures, g_slice_new(). Public structure types should always be returned after being zero-ed, either explicitly for each member, or by using g_new0() or g_slice_new0(). + Macros Try to avoid private macros unless strictly necessary. Remember to #undef them at the end of a block or a series of functions needing them. Inline functions are usually preferable to private macros. Public macros should not be used unless they evaluate to a constant.