Since cogl-pipeline.c has become very unwieldy this make a start at
trying to shape this code back into a manageable state. This patche
moves all the API relating to core pipeline state into
cogl-pipeline-state.c. This doesn't move code relating to layer state
out nor does it move any of the code supporting the core design
of CoglPipeline itself.
This change alone factors out 2k lines of code from cogl-pipeline.c
which is obviously a good start. The next step will be to factor
out the layer state and then probably look at breaking all of this
state code down into state-groups.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
dgettext (which Cogl is using) doesn't work unless you first tell
gettext where the locale dir is for the library's domain. This just
adds the necessary calls into _cogl_init.
https://bugzilla.gnome.org/show_bug.cgi?id=658700
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When the clip contains two rectangles which do not intersect it was
generating a clip bounds where the bottom-right corner was above or to
the left of the top-left corner. This would end up allowing the pixels
between the two rectangles instead of clipping everything like it
should. To fix this there is now an extra check which detects this
situation and just clears the clip bounds to all zeroes in a similar
way to what cogl-clip-stack does.
https://bugzilla.gnome.org/show_bug.cgi?id=659029
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Commit 12b3d21a changed cogl-path so that it will use the vertex
attribute API to stroke the path in a similar way to how it was using
the API to fill the path. However it wasn't clearing the stroke buffer
when the path is modified so it would continue to use the unmodified
stroke.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of adding -DCOGL_ENABLE_EXPERIMENTAL_2_0_API to the
cogl-2.0-experimental.pc file we now install a cogl2-experimental.h
that #defines COGL_ENABLE_EXPERIMENTAL_2_0_API before including
cogl.h.
The problem with having the define in the .pc file is that you might
develop a library that depends on the experimental 2.0 api internally
and then you might want to use that library with Clutter which still
uses the 1.0 API but the .pc file for your library will indirectly,
automatically enable the 2.0 api which can cause conflicts.
When we are about to start arbfp codegen we call shader_state_new() to
allocate new state structures used to build up the code and that
function makes sure to zero the newly allocated structures.
Right after calling shader_state_new() we were then also explicitly
iterating though the newly allocated unit_state structures and zeroing
the .sampled and .dirty_combine_constant members as well as resetting
shader_state->next_constant_id = 0. This patch removes that redundant
re-initialization of state.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We weren't actually tracking which layers have been allocated param
space for combine constants; all layers just had a default constant_id
of 0 that indexes into the program.local[] params array and a dirty flag
to say when the constant needs updating. There are times though when we
say to update everything by-passing the dirty flag and because we
weren't actually tracking which layers needed constants we would always
write a constant to program.local[0] for every layer. The upshot was
that we could end up clobbering a real constant that was actually
allocated the constant_id = 0 slot.
This patch adds a new UnitState bitfield to track if the layer has a
corresponding constant that may need flushing and we only ever write the
constant with glProgramLocalParameter4fv if that's set.
https://bugzilla.gnome.org/show_bug.cgi?id=658092
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This makes a start on porting the Cogl conformance tests that currently
still live in the Clutter repository to be standalone Cogl tests that no
longer require a ClutterStage.
The main thing is that this commit brings in is the basic testing
infrastructure we need, so now we can port more and more tests
incrementally.
Since the test suite wants a way to synchronize X requests/replies and
we can't simply call XSynchronize in the test-utils code before we know
if we are really running on X this adds a check for an environment
variable named "COGL_X11_SYNC" in cogl-xlib-renderer.c and if it's set
it forces XSynchronize (dpy, TRUE) to be called.
By default the conformance tests are run off screen. This makes the
tests run much faster and they also don't interfere with other work you
may want to do by constantly stealing focus. CoglOnscreen framebuffers
obviously don't get tested this way so it's important that the tests
also get run on screen every once in a while, especially if changes are
being made to CoglFramebuffer related code. On screen testing can be
enabled by setting COGL_TEST_ONSCREEN=1 in your environment.
The line "#define cogl_display_get_rendrer cogl_display_get_rendrer_EXP"
should read
"#define cogl_display_get_renderer cogl_display_get_renderer_EXP"...
https://bugzilla.gnome.org/show_bug.cgi?id=658333
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This adds a new function, cogl_framebuffer_get_color_format() to be able
to query the common pixel format for any color buffers attached to a
given CoglFramebuffer. For example an offscreen framebuffer created
using cogl_offscreen_new_to_texture() would have a format matching the
texture.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If the user doesn't explicitly pass an onscreen template then instead of
leaving display->onscreen_template as NULL we now instantiate a template
ourselves. This simplifies winsys code that might want to refer to the
template since it needn't first check for a NULL pointer.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
All our experimental Cogl symbols have a corresponding #define to add
"_EXP" to the end of the symbol name, but those defines are often
positioned right after the corresponding gtk-doc comment and before
the symbol definition which means the generated documentation ends up
refering to the define and not the real definition. This tidies up
cogl-texture-2d.h and moves all the defines to be be before the gtk-doc
comments.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Whenever a texture lookup is performed for a layer the result is now
stored in a variable and used repeatedly instead of generating the
code for the lookup every time it is accessed. This means for example
when using the INTERPOLATE function with a texture lookup for the
third parameter it will only generate one texture lookup instead of
two.
https://bugzilla.gnome.org/show_bug.cgi?id=656426
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This patch changes it so that code for each layer is generated on
demand instead of directly in the add_layer implementation. The
pipeline only explicitly generates code for the last layer. If this
layer references the result from any other layers, these will also be
recursively generated. This means that if a layer is using 'REPLACE'
then it won't redundantly generate the code for the previous
layers.
The result for each layer is generated into a variable called layer%i
where %i is the layer index (not the unit index). Therefore to get the
result from layer n we just have to refer to the varible layern.
https://bugzilla.gnome.org/show_bug.cgi?id=656426
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of calling _cogl_texutre_prepare_for_upload in
cogl_texture_set_region_from_bitmap the call is now deferred to the
implementation of the virtual for set_region. This is needed if the
texture backend is using a different format for the actual GL texture
than what is reported by cogl_texture_get_format. This happens for
example with atlas textures which report the original internal format
specified when the texture was created but actually always store the
data in an RGBA texture.
Also when creating an atlas texture from a bitmap it was preparing the
bitmap to be uploaded to the original format instead of the format of
the actual texture used for the atlas. Then it was using
cogl_texture_set_region_from_bitmap to upload the 5 pieces to make the
copies of the edge pixels. This would end up converting the image to
the actual format 5 times. The atlas textures have now been changed to
prepare the bitmap for the right format.
https://bugzilla.gnome.org/show_bug.cgi?id=657840
Reviewed-by: Robert Bragg <robert@linux.intel.com>
for a blend string like:
"RGBA=ADD(SRC_COLOR, SRC_COLOR * (DST_COLOR[A]))"
it was awkward that we were requiring developers to explicitly put
redundant brackets around the DST_COLOR[A] blend factor. The parser has
been updated so now braces are only required for factors like
"(1-SRC_COLOR[A])"
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Add a method on the renderer to know how many texture image units are
accessible from fragment shaders.
https://bugzilla.gnome.org/show_bug.cgi?id=657347
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This function was not used in the opengl pipeline, probably because of
the more precise get_max_activable_texture_units().
Remove it then.
https://bugzilla.gnome.org/show_bug.cgi?id=657347
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Similar to the widely used gluLookAt API, this adds a CoglMatrix utility
for setting up a view transform in terms of positioning a camera/eye
position that points to a given object position aligned to a given
world-up vector.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Cogl aims to consistently put the origin of 2D objects at the top-left
instead of the bottom left as OpenGL does, but there was an oversight
and the experimental cogl_framebuffer_swap_region API was accepting
coordinates relative to the bottom left. Cogl will now flip the user's
given rectangles to be relative to the bottom of the framebufffer before
sending them to APIs like glXCopySubBuffer and glBlitFramebuffer.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If the user doesn't explicitly allocate a CoglFramebuffer then Cogl
should automatically allocate the framebuffer when the user starts to
draw to the framebuffer. So this way calling cogl_framebuffer_allocate
is only required if you are explicitly interested in checking for and
gracefully handling failures to allocate a framebuffer. If automatic
allocation fails then application behaviour becomes undefined.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This makes cogl_framebuffer_clear and cogl_framebuffer_clear4f public as
experimental API. Since these functions take explicit framebuffer
pointers you don't need to push/pop a framebuffer just to clear it. Also
these functions are implicitly tied to a specific CoglContext via the
framebuffer pointer unlike cogl_clear.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Some of the functions we were calling in cogl_framebuffer_clear[4f] were
referring to the current framebuffer, which would result in a crash
if nothing had been pushed before trying to explicitly clear a given
framebuffer.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
There is no need to call _cogl_framebuffer_init_bits for the draw and
read buffers each time we flush the framebuffer state since we will
always re-sync with gl if necessary when the
cogl_framebuffer_get_red/green/blue/alpha_bits functions are called.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a function to query what CoglContext a given framebuffer
belongs too. This can be useful if you pass framebuffer pointers around
and at some point you want to create another framebuffer as part of the
same context as a given framebuffer without assuming there is a single
default context.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The CoglBuffer api is available as experimental 2.0 api but we forgot to
exposed the COGL_BUFFER casting macro.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Instead of creating typedefs like uint8, uint16 and uint32 we now use
the glib sized typedefs in stb_image to avoid conflict with the uint8,
uint16 and uint32 typedefs on android.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We shouldn't assume the GLchar is a valid typedef with all GL headers
when declaring all the symbols in cogl-ext-functions.h to lookup. GLchar
may not be avilable with gles1 for example so we were seeing build
failures. The patch simply replaces occurrences of GLchar with char.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When cogl initializes we now check for a cogl/cogl.conf in any of the
system config dirs (determined using $XDG_CONFIG_DIRS on linux) we then
also check the user's config directory (determined using XDG_CONFIG_HOME
on linux) for a cogl/cogl.conf file. Options specified in the user
config file have priority over the system config options.
The config file has an .ini style syntax with a mandatory [global]
section and we currently understand 3 keynames: COGL_DEBUG, COGL_DRIVER
and COGL_RENDERER which have the same semantics as the corresponding
environment variables.
Options set using the environment variables have priority over options
set in the config files. To allow users to undo the enabling of debug
options in config files this patch also adds a check for COGL_NO_DEBUG
environment variable which will disable the specified options which may
have been enabled in config files.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The parser couldn't cope with TEXTURE_N source arguments because the
sources are checked in turn to find one that matches the beginning of
the argument. The TEXTURE_N source was checked last so it would end up
matching the regular 'TEXTURE' source and then the parser would choke
when it tries to parse the trailing parts.
This patch just moves the check for TEXTURE_ to the top. It also also
changes it so that the argument only needs to be at least 8 characters
long instead of 9. This is necessary because the parser doesn't
consider the digits to be part of the name of the argument so while we
are parsing 'TEXTURE_0' the length is only 8.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Since the projection matrix isn't tracked in the journal and since our
software transform of vertices as we log into the journal doesn't
include the projective transform we need to make sure we flush all
primitives in the journal before ever changing the projection.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
It's not necessary to generate cogl-display.h just for the GDL backend
and to change the inclusion of libgdl.h. We can just tweak the include
CFLAGS to put /usr/include/CE4100 in the search path when needed.
Previously this did not work because of a stay ',' at the end of the
COGL_EXTRA_CFLAGS int he configure.ac. This actually simplifies the
code, which is always good.
This also fixes out of tree builds.
https://bugzilla.gnome.org/show_bug.cgi?id=655724
Reviewed-by: Neil Roberts <neil@linux.intel.com>
cogl_polygon creates some temporary strings, CoglAttributeBuffers and
CoglAttributes but it was never freeing them.
Based on a patch by Florian Renaut
https://bugzilla.gnome.org/show_bug.cgi?id=655556
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The documentation for wglGetProcAddress implies that it should only be
used for extension functions. The rest of Cogl assumes that it can
dynamically resolve all GL symbols so it would crash if this
happens. This patch makes it fallback to trying to resolve the symbol
using GModule to open the opengl32 library if wglGetProcAddress fails.
https://bugzilla.gnome.org/show_bug.cgi?id=655510
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The check for the point sprite feature got lost when the feature
functions header was combined for GL and GLES in dae02a99a.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The cogl_framebuffer_get_blue_bits was defined 2 times-fix to use the
correct define for cogl_framebuffer_get_alpha_bits
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If the display has been setup up, we should destroy the underlying
objects that the winsys has created. This can be done by calling the
winsys->destroy_display() function in _free.
Then, in that function, and for the NULL and GDL EGL platform we can
destroy the surface we have created in the setup_display() function
(through create_context()).
This allows to have clutter create a "dummy" display in
cogl_renderer_check_onscreen_template(), then free it, then recreate the
context and the surface that will be the final ones.
https://bugzilla.gnome.org/show_bug.cgi?id=655355
If we are being called without any GDL specific call (either the plane
we want to render to or the swap chain length) we can provide sane
defaults to still be able to create a context and a surface.
https://bugzilla.gnome.org/show_bug.cgi?id=655355
The egl winsys has a few code paths depending on the platform we are
compiling for. The GDL platform needs those defined as well.
A few tweaks were needed here and there to make it compile again.
https://bugzilla.gnome.org/show_bug.cgi?id=655355
We weren't defining CLUTTER_CEX100_LIBGDL_PREFIX in the configure.ac and
thus failing to compile when selecting the EGL/GDL winsys. Take the
opportunity to rename that to COGL_CEX100_LIBGDL_PREFIX
https://bugzilla.gnome.org/show_bug.cgi?id=655355
The GLX winsys is only compatible with GL drivers so we now bail out
from cogl-winsys-glx.c:_cogl_winsys_renderer_connect if a GLES driver
has been chosen.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When passing the EGL_NATIVE_PIXMAP_KHR target to eglCreateImage the
EGL_KHR_image_pixmap extension explicitly states that EGL_NO_CONTEXT
must also be passed so we are now careful to do this.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When we need to guarantee that the glColorMask is re-asserted the next
time that a primitive is drawn it is not enough to just OR in the
LOGIC_OPS flag to ctx->current_pipeline_changes_since_flush because
_cogl_pipeline_flush_gl_state actually checks the age of the pipeline
before checking that. If the pipeline hasn't aged then we bail out
early. This makes sure we decrement
ctx->current_pipeline_changes_since_flush so the next time we come to
flush a pipeline we will see a differing age.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
In cogl_quaternion_init_from_array we were passing the address of the x
component as the destination for memcpy, but that was wrong at least
because w is actually the first member in the structure. Another
concern raised was whether it was safe to assume that there was no
padding within the CoglQuaternion struct with some compilers so we also
switch to explicitly indexing each element of the array we want to copy.
In practice I think it's pretty safe to assume that padding will only be
introduced to ensure members are naturally aligned, but being explicit
is readable and it can't hurt to be extra cautious.
Another good catch in bug #655228 was that in
cogl_quaternion_get_rotation_axis we had a copy and paste error at the
end where we finally extract the axis and we were repeatedly calculating
just the x component. Now we calculate the y and z components too.
Thanks to Bug #655228 for identifying these issues.
https://bugzilla.gnome.org/show_bug.cgi?id=655228
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Previously, _cogl_get_proc_address had a fallback to resolve the
symbol using g_module_open(NULL) to get the symbol from anywhere in
the address space. The EGL backend ends up using this on some drivers
because eglGetProcAddress isn't meant to return a pointer for core
functions. This causes problems if something in the process is linking
against a different GL library, for example Cairo may be linking
against libGL itself. In this case it may end up resolving symbols
from the GL library even if GLES is being used.
This patch removes the fallback. The EGL version now has its own
fallback instead which passes the existing libgl_module from the
renderer to g_module_symbol so that it should only get symbols from
that library or its dependency chain. The GLX and WGL winsys only call
glXGetProcAddress and wglGetProcAddress. The stub winsys does however
continue using the global symbol lookup.
The internal _cogl_get_proc_address function has been renamed to
_cogl_renderer_get_proc_address because it needs a connected renderer
to work so it could be considered to be a renderer method. The pointer
to the renderer is passed down to the winsys backends so that it can
use the data attached to the renderer to get the module pointers.
https://bugzilla.gnome.org/show_bug.cgi?id=655412
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The template_pipeline variable in _cogl_pipeline_fragend_arbfp_start
was not being initialised if the program caches are disabled with
COGL_DEBUG=disable-program-caches so it would crash. The other
backends have a similar variable but they already initialise it.
https://bugzilla.gnome.org/show_bug.cgi?id=655400
This exposes 2 experimental functions that make it possible to upload a
subregion of a texture from a CoglBuffer by first wrapping the buffer as
a CoglBitmap and then allowing uploading of a subregion from a
CoglBitmap. The new functions are:
cogl_bitmap_new_from_buffer() and
cogl_texture_set_region_from_bitmap()
Actually for now we are exporting this API for practical reasons since
we already had this API internally and it enables a specific feature
that was requested, but it is worth nothing that it's quite likely we
will replace these with functions that don't involve the CoglBitmap API
at some point.
For reference: The CoglBitmap API was actually removed from the 2.0
experimental API reference manual some time ago because the hope was
that we'd come up with a neater replacement. It doesn't seem entirely
clear what the scope of the CoglBitmap api is so it has became a bit of
a dumping ground. CoglBitmap is used for image loading, as a means to
represent the layout of image data and also internally deals with format
conversions.
Note: Because we are avoiding including CoglBitmap as part of the 2.0
API these functions aren't currently included in the 2.0 reference
manual.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
in cogl-ext-functions.h we had one multitexture feature that checked for
the ARB_multitexture extension and if found it then expected to find
glActiveTexture and glClientActiveTexture. The problem is that the
multitexture extension is part of the core GLES 1 and 2 APIs except that
for GLES2 there is no glClientActiveTexture function. By trying to
handle it as one feature that meant that Cogl would fail to check the
multitexture extension which is a hard requirement for Cogl.
The reason this went unnoticed is because Cogl can indirectly end up
linked to an OpenGL library via cairo and so we were finding a
glClientActiveTexture symbol there. This highlights that we should
probably stop using g_module_open (NULL) when checking features and
instead we should use the module we opened in cogl-renderer.c.
This adds CoglPipeline and CoglFramebuffer support for setting a color
mask which is a bit mask defining which color channels should be written
to the current framebuffer.
The final color mask is the intersection of the framebuffer color mask
and the pipeline color mask. The framebuffer mask affects all rendering
to the framebuffer while the pipeline masks can be used to affect
individual primitives.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Instead of using g_module_build_path with the short name of the GL
library (eg, "GL") and relying on glib to add the suffix and prefix,
the configure script now directly encodes the full name including the
version number (eg, "libGL.so.1"). This is necessary because distros
don't always install the non-versioned suffix for the library.
The GLES libraries are left without the version suffix because it's
not clear what should be placed here and I can't find any
documentation from Khronos to clarify this. Mesa seems to install a
file called libGLESv2.so.2 but the IMG SDK doesn't install any
versioned library. There is an example of dynamically loading
libGLESv2 in the Chromium source code and that does not use the
version suffix even though it does use the version suffix for GL. This
implies that it's at least fairly normal to load the unversioned name
for GLES.
https://bugzilla.gnome.org/show_bug.cgi?id=654593
When we moved all the GL function pointers to be part of CoglContext in
commit dae02a99a5 we made a mistake and started to OR in the private
COGL_PRIVATE_FEATURE_TEXTURE_2D_FROM_EGL_IMAGE feature flag into the non
private flags which would mean cogl would think the GL_OES_EGL_image
extension wasn't supported.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This makes sure the egl winsys frees the private egl_tex_pixmap state if
in _cogl_winsys_texture_pixmap_x11_create if there is a failure to
create an EGLImage.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If _cogl_winsys_texture_pixmap_x11_create() fails then implicitly no
private state has been associated with the given tex_pixmap. Since that
winsys isn't associated with it we explicitly set tex_pixmap->winsys =
NULL.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This ensures that tex_pixmap->use_winsys_texture is always initialized
during cogl_texture_pixmap_x11_new - either according to the result of
winsys->texture_pixmap_x11_create, or if the winsys doesn't support tfp
we explicitly initialize to FALSE.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The _cogl_context_check_gl_version function is meant to be called once
Cogl has a GL context so that it can check whether the context found
is supported by Cogl. However, only the stub winsys was calling this
and it was doing it before Cogl had a chance to retrieve the function
pointer for glString so it would just crash. This patch combines the
two functions into one so that _cogl_context_update_features returns a
gboolean and a GError. Then it can just check the context itself.
https://bugzilla.gnome.org/show_bug.cgi?id=654440
Reviewed-by: Robert Bragg <robert@linux.intel.com>
cogl_read_pixels returns image data in a top-down memory order, but
because OpenGL normally returns pixel data in a bottom-up order we
have to flip the data before returning it to the user. If the OpenGL
driver supports the GL_MESA_pack_invert extension though we can ask the
driver to return the data in a top-down order in the first place.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
cogl-winsys-egl-feature-functions.h was unconditionally depending on the
struct wl_display type being defined. This guards the check for the
"WL_bind_wayland_display" extension with
#ifdef COGL_HAS_EGL_PLATFORM_WAYLAND_SUPPORT
Signed-off-by: Neil Roberts <neil@linux.intel.com>
This adds a getter and setter for requesting dithering to be enabled.
Dithering is a hardware dependent technique to increase the visible
color resolution beyond what the underlying hardware supports by playing
tricks with the colors placed into the framebuffer to give the illusion
of other colors. (For example this can be compared to half-toning used
by some news papers to show varying levels of grey even though their may
only be black and white are available).
The results of enabling dithering are platform dependent and may have no
effect.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
The CoglPipelineCache is now extended to store templates for state
affecting vertex shaders and combined programs. The GLSL fragend,
vertend and progend now uses this to get cached shaders and a program.
When a new pipeline is created it will now get hashed three times if
the GLSL backends are in use (once for the fragend, once for the
vertend and once for the progend). Ideally we should add some way for
the progend to check its cache before the fragends and vertends are
checked so that it can bypass them entirely if it can find a cached
combined program.
The pipeline cache is now handled in CoglPipelineCache instead of
directly in the ARBfp fragend. The flags needed to hash a pipeline
should be exactly the same for the ARBfp and GLSL fragends so it's
convenient to share the code. The hash table now stores the actual
pipeline as the value instead of the private data so that the two
fragends can attach their data to it. That way it's possible to use
the same pipeline key with ancestors that are using different
fragends.
The hash table is created with g_hash_table_new_full to set a
destructor for the key and value and there is a destructor for
CoglPipelineCache that gets called when the CoglContext is
destroyed. That way we no longer leak the pipelines and shader state
when the context is desroyed.
Previously the fragends had a separate private data pointer which was
used by the GLSL and ARBfp fragends to store a tiny struct containing
a single pointer to the ref-counted shader state. The space for the
private data pointer is reserved in all of the pipelines for all of
the potential backends. The vertends and progends however did this
differently by directly storing the pointer to the ref counted data
using cogl_object_set_user_data. This patch unifies the different
methods so that they all use cogl_object_set_user_data and the
fragends don't bother with the separate tiny allocation for the
private data. The private data pointer array has been removed from
CoglPipeline and the corresponding fragend virtual to free the private
data has also been removed because this can instead be done with the
destroy notify from the object user data.
The variable names used have been unified so that all of the vertends
and fragends name their data struct CoglPipelineShaderState and use a
variable called shader_state to refer to it. The progend uses
CoglPipelineProgramState and a variable called program_state.
This should also fix two potential bugs. the ARBfp fragend was
apprently leaking a reference to the private state when it creates the
private data because it was adding a reference before stroring the
pointer to the newly allocated data but the ref count is already set
to 1 on creation. The other potential bug is that the free function
for CoglPipeline was only calling the free_priv virtual for the
currently used fragend of the pipeline. The design of the fragends is
meant to allow a pipeline to have multiple fragend priv datas because
a child pipeline could be attaching its fragend data to the ancestor
and its allowed to pick a different fragend.
That list is tracking the layers for get_layers_list() and needs to be
freed later on. However _copy() did not initialize it and we ended up
trying to free some garbage pointer.
_cogl_pipeline_get_layers() allocates a list on the pipeline to be able
to get the pointer valid as long as possible and store that list in the
pipeline object.
You need to free that list when freeing the pipeline.
Signed-off-by: Robert Bragg <robert@linux.intel.com>
cogl-winsys-egl-feature-functions.h wasn't being listed as source and so
it wasn't ending up in dist tarballs.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
This renames cogl_context_egl_get_egl_context to
cogl_egl_context_get_egl_context to be consistent with other platform
specific APIs.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
For cogl 2.0 we don't want to have a default context. In the meantime
we can simply assume that calling cogl_context_new() implicitly
sets that context as the default context before returning.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
There were several CoglOnscreen functions named like:
cogl_onscreen_<platform>_blah instead of cogl_<platform>_onscreen_blah
so this patch updates those to be consistent with other platform
specific apis we have in cogl.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
The GL or GLES library is now dynamically loaded by the CoglRenderer
so that it can choose between GL, GLES1 and GLES2 at runtime. The
library is loaded by the renderer because it needs to be done before
calling eglInitialize. There is a new environment variable called
COGL_DRIVER to choose between gl, gles1 or gles2.
The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have
been changed so that they don't assume the ifdefs are mutually
exclusive. They haven't been removed entirely so that it's possible to
compile the GLES backends without the the enums from the GL headers.
When using GLX the winsys additionally dynamically loads libGL because
that also contains the GLX API. It can't be linked in directly because
that would probably conflict with the GLES API if the EGL is
selected. When compiling with EGL support the library links directly
to libEGL because it doesn't contain any GL API so it shouldn't have
any conflicts.
When building for WGL or OSX Cogl still directly links against the GL
API so there is a #define in config.h so that Cogl won't try to dlopen
the library.
Cogl-pango previously had a #ifdef to detect when the GL backend is
used so that it can sneakily pass GL_QUADS to
cogl_vertex_buffer_draw. This is now changed so that it queries the
CoglContext for the backend. However to get this to work Cogl now
needs to export the _cogl_context_get_default symbol and cogl-pango
needs some extra -I flags to so that it can include
cogl-context-private.h
The texture driver functions are now accessed through a vtable pointed
to by a struct in the CoglContext so that eventually it will be
possible to compile both the GL and GLES texture drivers into a single
binary and then select between them at runtime.
Since the GL function pointers have move to the root of CoglContext,
the driver specific data for GLES became empty and the GL data had
only one varible which apparently nothing was using. It's therefore
convenient to remove the private driver data to make it easier to have
a build of Cogl which enables both GL and GLES support. If we ever
need driver private data later we might want to use
cogl_object_set_user_data instead.
cogl-ext-functions.h now contains definitions for all of the core GL
and GLES functions that we would normally link to directly. All of the
code has changed to access them through the cogl context pointer. The
GE macro now takes an extra parameter to specify the context because
the macro itself needs to make GL calls but various points in the Cogl
source use different names for the context variable.
Instead of storing all of the feature function pointers in the driver
specific data of the CoglContext they are now all stored directly in
CoglContext. There is a single header containing the description of
the functions which gets included by cogl-context.h. There is a single
function in cogl-feature-private.c to check for all of these
functions.
The name of the function pointer variables have been changed from
ctx->drv.pf_glWhatever to just ctx->glWhatever.
The feature flags that get set when an extension is available are now
separated from the table of extensions. This is necessary because
different extensions can mean different things on GLES and GL. For
example, having access to glMapBuffer implies read and write support
on GL but only write support on GLES. The flags are instead set in the
driver specific init function by checking whether the function
pointers were successfully resolved.
_cogl_feature_check has been changed to assume the feature is
supported if any of the listed extensions are available instead of
requiring all of them. This makes it more convenient to specify
alternate names for the extension. Nothing else had previously listed
more than one name for an extension so this shouldn't cause any
problems.
When a copy is made of a weak pipeline it tries to promote the weak
parent by taking a reference on that weak pipeline's parent. However
promote_weak_ancestors was instead always taking a reference on the
first parent, regardless of whether it was weak. The corresponding
revert_weak_ancestors function which is supposed to undo the effect of
promote_weak_ancestors only unref'd the parent if was weak. This meant
that any non-weak pipeline copy would end up leaking a reference on
its parent.
This patch changes both functions to have a similar loop. It loops
through all of the parents of the pipeline until it finds one that is
not weak and refs or unrefs the *parent* of that pipeline instead of
the pipeline itself.
Signed-off-by: Robert Bragg <robert@linux.intel.com>
This removes the unused COGL_PRIVATE_FEATURE_EGL flags since
check_egl_extensions doesn't refer to these flags it uses the
COGL_EGL_WINSYS_FEATURE flags.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
instead of looking at the ctx->private_feature_flags to determine if
Cogl supports creating an EGLImage from a X Pixmap we now check the
renderer private features instead since these are what get setup in
check_egl_extensions. The conflicting flags defined in cogl-internal.h
should be removed since they are un-used.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
check_egl_extensions was mistakenly always ORing in the priv flags of
the first feature_data entry instead of referencing the i variable to
index into the array of feature data after determining that an extension
is available.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
This adds a description for the cogl-framebuffer section and adds lots
of missing symbols to the 2.0 reference manual.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
This exposes the previously internal only
_cogl_framebuffer_get_red/green/blue/alpha_bits() functions as 2.0
experimental API.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
This adds a function called cogl_matrix_is_identity that can determine
if a given matrix is an identity matrix or not.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
It has been overly cumbersome to work with the matrix code ever since we
pulled in the mesa code because we initially kept the mesa and the
original cogl code separate. We have made several updates to the mesa
code since integrating, and the coding style has changed a lot compared
to the original mesa code, so there's little point in keeping the two
files separate any longer.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Instead of having everything in cogl-matrix-mesa.[ch] be in the
_math namespace this now puts them in the _cogl_matrix namespace
instead, in preparation for flattening cogl-matrix-mesa.[ch] into
cogl-matrix.[ch].
Signed-off-by: Neil Roberts <neil@linux.intel.com>
The aim is to flatten cogl-matrix-mesa.[ch] code back into
cogl-matrix.[ch] and removing cruft first makes sense. This removes
several un-used macros and vector related functions and also replaces
the use of doxygen style comment markup with the gtk-doc style we use
throughout the reset of cogl.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Instead of having a separate GList for the children we can use the
linked list code from FreeBSD and store the list node directly in the
struct. That way we can avoid having a separate slice allocation for
the list node. It also means that we effectively have a pointer to the
list node given a pointer to the pipeline node. That means we can
unparent a pipeline without having to walk the entire list of
children. With this change there is no need to have the optimisation
to fast track a pipeline that only has one child which simplifies the
code somewhat.
With this patch we are removing a pointer and a gboolean from the
CoglPipeline struct and adding two pointers. On 32-bit architectures
this should end up exactly the same size because a gboolean is the
same size as a pointer. On 64-bit architectures I think it should end
up 4 bytes smaller because it also ends up removing two cases where a
pointer follows a gboolean which presumably would mean the compiler
would have to insert 4 bytes of padding to keep the pointer aligned to
8 bytes.
https://bugzilla.gnome.org/show_bug.cgi?id=652514
This modifies cogl-queue.h so that:-
- Everything is in a COGL_* namespace
- It assumes there is a typedef for all of the types instead of
requiring the code to use struct WhateverType.
- It doesn't contain any tabs
https://bugzilla.gnome.org/show_bug.cgi?id=652514
This directly copies in the header from the FreeBSD kernel for their
linked-list implementation. A later patch will modify it but this
patch is here so we can have a clear patch to show what the
changes are.
Using the list implementation from this header is beneficial as
opposed to using GList because it's possible to embed the list
pointers directly into another struct. This saves a separate
allocation and it also makes it possible to remove an item from the
list without having to iterate the entire list to find its list
node. The header provides four different list types: single and
doubley linked lists and each of them can either have a header with
pointers to the beginning and end or just to the beginning. Glib
effectively only provides single and doubley linked lists with a
pointer to the beginning or a doubley-linked list with a pointer to
both (GQueue).
https://bugzilla.gnome.org/show_bug.cgi?id=652514
The function declarations for the GL_OES_EGL_image extension were
using the wrong name for the GLeglImageOES type so it was getting
build errors when compiling for GLES.
This adds a cogl-win32-renderer.h for the win32 specific cogl-renderer
API instead of having #ifdef guards in cogl-renderer.h
Signed-off-by: Neil Roberts <neil@linux.intel.com>
This updates the public wayland symbols to follow the pattern
cogl_wayland_blah instead of cogl_blah_wayland.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
we've got into a bit of a mess with how we name platform specific
symbols and files, so this is a first pass at trying to tidy that up.
All platform specific symbols should be named like
cogl_<platform>_symbol_name and similarly files should be named like
cogl-<platform>-filename.c
This patch tackles the X11 specific renderer/display APIs as a start.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
This adds Xlib and Win32 typesafe replacements for
cogl_renderer_handle_native_event, cogl_renderer_add_native_filter,
cogl_renderer_remove_native_filter. The old functions are kept as an
implementation detail so we can share code.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
It used to be that we passed around NULL terminated arrays of
attributes, but since 3c1e83c7f we now explicitly pass an n_attributes
count instead. There were some leftovers of the old approach in the
cogl_vdraw_[indexed]_attributes functions and also there was an
off-by-one error with the n_attributes values passed on which was
causing crashes.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
When setting a NULL texture on a CoglPipeline we would also reset the
texture target to a dummy value of 0. Reseting the target also had the
effect of making fragends discard any associated program. In cases where
the NULL texture was only transient until a replacement texture could be
set we were re-running lots of redundant codegen and shader
compilations.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
There is a documented rule that layer changes should only be notified to
the fragend once; either as a pipeline change or as a layer change. When
the number of layers associated with a material changes then that should
get notified against the pipeline. All other layer changes get notified
against the layer.
There was a mistake in the _cogl_pipeline_add/remove_layer_difference
functions, in that we weren't using the 'inc/dec_n_layers' boolean to
determine if the fragend should be notified of the change.
It was also noticed that the logic of _cogl_pipeline_prune_to_n_layers
would also break this rule, by failing to notify some changes at all.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
This adds API to let you override the choice of Cogl's winsys backend.
Previously it was only possible to override the winsys using the
COGL_RENDERER environment variable, but it's useful for something like
Clutter to be able to control the winsys via API without needing
environment variable tricks. This also adds API to query back the
winsys chosen by Cogl, in case you don't set an explicit override.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
This exposes experimental cogl_framebuffer APIs for getting and setting
a viewport without having to refer to the implicit CoglContext. It adds
the following experimental API:
cogl_framebuffer_set_viewport
cogl_framebuffer_get_viewport4fv
cogl_framebuffer_get_viewport_x
cogl_framebuffer_get_viewport_y
cogl_framebuffer_get_viewport_width
cogl_framebuffer_get_viewport_height
Signed-off-by: Neil Roberts <neil@linux.intel.com>
This adds a _cogl_init function for Cogl that we expect to be the first
thing called before anything else is done with Cogl. It's not a public
API so it's expected that all entry points for Cogl that might be the
first function used should call _cogl_init().
We currently call _cogl_init() in these functions:
cogl_renderer_new
cogl_display_new
cogl_context_new
cogl_android_set_native_window
_cogl_init() can be called multiple times, and only the first call has
any affect.
For example _cogl_init() gives us a place check and parse the COGL_DEBUG
environment variable.
Since we don't have any need to parse command line arguments (we can
always get user configuration options from the environment) our init
function doesn't require argc/argv pointers.
By saying up front that we aren't interested in command line arguments
that means we can avoid the mess that is GOption based library
initialization which is extremely fragile due to its lack of dependency
tracking between modules.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
This adds a --enable-profile option which enables uprof based profiling.
It was also necessary to fixup a CLUTTER_ENABLE_PROFILING #ifdef in
cogl-context.c to renamed COGL_ENABLE_PROFILING instead. By default Cogl
doesn't output uprof reports directly, instead it assumes a higher level
toolkit will output a report. If you want a report from Cogl you can
export COGL_PROFILE_OUTPUT_REPORT=1 before running your app.
The latest version of uprof can be fetched from:
git://github.com/rib/UProf.git
This explicitly renames the cogl-2.0 reference manual to
cogl-2.0-experimental and renames the cogl-2.0 pkg-config file to
cogl-2.0-experimental.pc. Hopefully this should avoid
miss-understandings.
This reverts commit 3d2564df8f.
Since 01e1260aa the 'near' and 'far' defines are now undef'd on
Windows so we no longer have to remember not to use them in Cogl code.
This allows to track the number of objects allocated by Cogl. The
results are displayed on the standard output by calling :
cogl_debug_print_instances ();
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Signed-off-by: Neil Roberts <neil@linux.intel.com>
When validating a user pipeline before drawing with a CoglVertexBuffer
we sometimes find we have to make some overrides and we handle that by
creating a pipeline which is a weak copy of the user pipeline. The weak
pipeline gets associated with the original pipeline so if that pipeline
is used multiple times then we can re-use the same override pipeline and
skip validation. Because it's a weak pipeline we get notified when the
original material is destroyed or changed so we know our weak pipeline
is now invalid.
When we get notified that the weak material is invalid we should unref
it, but instead we were just discarding our reference to it. This was
resulting in leaking weak materials and in some cases those materials
referenced textures which would then also be leaked.
The wrapper for the can_hardware_repeat had a cut and paste error so
it would call the wrong function on the child texture.
Many thanks to Owen Taylor for finding this bug.
The COGL_DEBUG=disable-texturing debug variable disables texturing in
the fixed function fragend by not bothering to enable the texture
targets. This wasn't working for the programmable fragends because the
texture targets don't need to be enabled to use them. This patch
modifies the two programmable backends to generate a constant value
for the texture lookups in the shader when the debug variable is
given.
Instead of using _cogl_xlib_add/remove_filter we now use
_cogl_renderer_add/remove_native_filter. The _cogl_xlib_add_filter API
was only required as a stop gap while EGL support was still in Clutter
because in that case we were using the stub winsys and didn't have a
CoglRenderer.
This removes the redundant _cogl_xlib_trap/untrap_errors functions that
simply wrap equivalent functions in the _cogl_renderer_xlib namespace.
These were originally only required while the EGL winsys was being
handled in clutter and so there wasn't a CoglRenderer in all cases.
In the winsys vtable .xlib_get_visual_info and
.onscreen_x11_get_window_xid should be guarded by the
COGL_HAS_EGL_PLATFORM_POWERVR_X11_SUPPORT because they need to be there
if cogl is configured with --enable-xlib-egl-platform but not if just
configured with --enable-xlib.
When iterating through all the possible window systems trying to find
one we can successfully connect we now associated the current winsys
vtable with the renderer before calling winsys->renderer_connect in case
the implementation calls some other Cogl API that expects to be able to
determine the current winsys. For example calling _cogl_get_proc_address
when querying winsys extensions as part of a successful connect will
need to get at the current winsys vtable.
This adds internal API to be able to wrap a wayland buffer as a
CoglTexture2D. There is a --enable-wayland-egl-server option to decide
if Cogl should support this feature and potentially any EGL based winsys
could support this through the EGL_KHR_image_base and
EGL_WL_bind_display extensions.
By using the EGL_KHR_image_base/pixmap extensions this adds support for
wrapping X11 pixmaps as CoglTexture2D textures. Clutter will
automatically take advantage of this if using the
ClutterX11TexturePixmap actor.
This adds an internal texture_2d constructor that can wrap an EGLImage
as a CoglTexture2D. The plan is to utilize this for texture-from-pixmap
support with EGL as well as creating textures from wayland buffers.
Instead of the stub winsys being a special case set of #ifdef'd code
used when COGL_HAS_FULL_WINSYS wasn't defined, the stub winsys now
implements a CoglWinsysVtable like all other winsys backends (it's just
that everything is a NOP). This way we can get rid of the
COGL_HAS_FULL_WINSYS define and also the stub winsys can be runtime
selected whereas before it was incompatible with all other winsys
backends.
Since we no longer have any xlib based backends in Clutter that depend
on the stub winsys in Cogl we can now remove all the special case code
we had for this in cogl-xlib.c
This exposes a CoglTexture2D typedef and adds the following experimental
API:
cogl_is_texture_2d
cogl_texture_2d_new_with_size
cogl_texture_2d_new_from_data
cogl_texture_2d_new_from_foreign
Since this is experimental API you need to define
COGL_ENABLE_EXPERIMENTAL_API before including cogl.h.
Note: With these new entrypoints we now expect a CoglContext pointer to
be passed in, instead of assuming there is a default context. The aim is
that for Cogl 2.0 we won't have a default context so this is a step in
that direction.
This validates that the viewport width and height arguments are positive
values in _cogl_framebuffer_set_viewport. In addition, just before
calling glViewport we also assert that something else hasn't gone amiss
and that the internal viewport width/height values we track are still
positive before passing to glViewport which generates an error for
negative values.
This reverts commit b2e41f1bfa.
We are backing out the quartz specific stub winsys since we can simply
use the generic stub winsys on quartz until we develop a standalone
winsys. Since we plan on removing all special cases for the stub winsys
by handling with a winsys vtable like all the others it's better if we
don't introduce a quartz specific stub.
This reverts commit eb81ec945c.
We are backing out the quartz specific stub winsys since we can simply
use the generic stub winsys on quartz until we develop a standalone
winsys. Since we plan on removing all special cases for the stub winsys
by handling with a winsys vtable like all the others it's better if we
don't introduce a quartz specific stub.
Previously whenever the journal is flushed a new vertex array would be
created to contain the vertices. To avoid the overhead of reallocating
a buffer every time, this patch makes it use a pool of 8 buffers which
are cycled in turn. The buffers are never destroyed but instead the
data is replaced. The journal should only ever be using one buffer at
a time but we cache more than one buffer anyway in case the GL driver
is internally using the buffer in which case mapping the buffer may
cause it to create a new buffer anyway.
When flushing a pipeline that has more layers than the previous
pipeline, the fixed function fragend is supposed to detect that the
texture unit previously had no texture target enabled and then enable
it. However the logic for checking whether the unit was enabled was
broken due to a typing failure when unit->enabled and
unit->current_gl_target were combined into one value in commit
6b7139b0. This was breaking some of the conformance tests when the
fixed function fragend is used.
https://bugzilla.gnome.org/show_bug.cgi?id=650979
The CoglPipeline code uses a combination of GL_MAX_TEXTURE_COORDS,
GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS and GL_MAX_TEXTURE_UNITS to
determine the maximum number of layers to allow in a pipeline. However
on fixed function hardware that doesn't advertise either GLSL or ARBfp
it was still using the first two enums which will probably just return
0 and set a GLerror. This meant that we effectively didn't support
using any layers on purely fixed function hardware. This patch changes
it to only use those two enums if the appropriate extensions are
advertised and to always use GL_MAX_TEXTURE_UNITS except on GLES2
where there is no fixed function.
https://bugzilla.gnome.org/show_bug.cgi?id=650966
The native window type of the EGL/Android winsys is ANativeWinow*. The
Android NDK gives you a pointer to this ANativeWindow and you just need
to configure that window using the EGLConfig you are choosing when
creating the context.
This means you have to know the ANativeWindow* window before creating
the context. This is solved here by just having a global variable you
can set with cogl_android_set_native_window() before creating the
context. This is a bit ugly though, and it conceptually belongs to the
OnScreen creation to know which ANativeWindow* to use. This would need a
"lazy context creation" mechanism, waiting for the user to create the
OnScreen to initialize the GL context.
With GLES 1, frame buffers are a optional extensions. We need to make
sure the pointer exist before calling the function and do that by just
checkout the corresponding feature.
When try_create_context() returns saying that it has to be run again to
try to create a context with an alternate configuration, it might not
have a GError set (and in fact it does not right now).
g_clear_error() handles that case where error is still NULL;
Early implementations provided only a GLES/egl.h while Khronos's
implementer guide now states EGL/egl.h is the One. Some implementations
keep a GLES/egl.h wrapper around EGL/egl.h for backward compatibility
while others provide EGL/egl.h only.
Also took the opportunity to factorize a bit this inclusion in
cogl-defines.h.
Instead of simply extending the cogl_pipeline_ namespace to add api for
controlling the depth testing state we now break the api out. This adds
a CoglDepthState type that can be stack allocated. The members of the
structure are private but we have the following API to setup the state:
cogl_depth_state_init
cogl_depth_state_set_test_enabled
cogl_depth_state_get_test_enabled
cogl_depth_state_set_test_function
cogl_depth_state_get_test_function
cogl_depth_state_set_writing_enabled
cogl_depth_state_get_writing_enabled
cogl_depth_state_set_range
cogl_depth_state_get_range
This removes the following experimental API which is now superseded:
cogl_material_set_depth_test_enabled
cogl_material_get_depth_test_enabled
cogl_material_set_depth_test_function
cogl_material_get_depth_test_function
cogl_material_set_depth_writing_enabled
cogl_material_get_depth_writing_enabled
cogl_material_set_depth_range
cogl_material_get_depth_range
Once a CoglDepthState structure is setup it can be set on a pipeline
using cogl_pipeline_set_depth_state().
Commit 3c1e83c7 changed uses of arrays of CoglAttributes to take a
length instead of being NULL terminated. In cogl_primitive_new it was
still adding the NULL terminator to the array it passes to
cogl_primitive_new_with_attributes but then it was also including this
terminator in the count so it would just segfault when it tries to ref
the NULL pointer. Also _cogl_primitive_new_with_attributes_unref was
still trying to detect the NULL terminator so it would also crash.
cogl/cogl-pango.h can't be included unless the include directory for
Pango is given in the compiler flags. In an application, it is
expected that if they are using this header then they would pull in
cogl-pango-1.0.pc which would provide this. However when building Cogl
itself we might be building without Pango support so the Makefile
can't rely on PANGO_CFLAGS. This was breaking building the
introspection data because cogl-pango.h was listed as one of the files
to scan but it can't be included.
For the first iteration of the CoglAttribute API several of the new
functions accepted a pointer to a NULL terminated list of CoglAttribute
pointers - probably as a way to reduce the number of arguments required.
This style isn't consistent with existing Cogl APIs though and so we now
explicitly pass n_attributes arguments and don't require the NULL
termination.
This is part of a broader cleanup of some of the experimental Cogl API.
One of the reasons for this particular rename is to switch away from
using the term "Array" which implies a regular, indexable layout which
isn't the case. We also want to strongly imply a relationship between
CoglBuffers and CoglIndexBuffers and be consistent with the
CoglAttributeBuffer and CoglPixelBuffer APIs.
This is part of a broader cleanup of some of the experimental Cogl API.
One of the reasons for this particular rename is to switch away from
using the term "Array" which implies a regular, indexable layout which
isn't the case. We also want to strongly imply a relationship between
CoglBuffers and CoglPixelBuffers and be consistent with the
CoglAttributeBuffer and CoglIndexBuffer APIs.
This is part of a broader cleanup of some of the experimental Cogl API.
One of the reasons for this particular rename is to switch away from
using the term "Array" which implies a regular, indexable layout which
isn't the case. We also want to have a strongly implied relationship
between CoglAttributes and CoglAttributeBuffers.
To help catch accidental changes to the size of public structs that can
be allocated on the stack this patch adds compile time checks that our
struct sizes haven't changed.
This adds an experimental CoglEuler data type and the following new
functions:
cogl_euler_init
cogl_euler_init_from_matrix
cogl_euler_init_from_quaternion
cogl_euler_equal
cogl_euler_copy
cogl_euler_free
cogl_quaternion_init_from_euler
Since this is experimental API you need to define
COGL_ENABLE_EXPERIMENTAL_API before including cogl.h
This adds an experimental quaternion utility API. It's not yet fully
documented but it's complete enough that people can start to experiment
with using it. It adds the following functions:
cogl_quaternion_init_identity
cogl_quaternion_init
cogl_quaternion_init_from_angle_vector
cogl_quaternion_init_from_array
cogl_quaternion_init_from_x_rotation
cogl_quaternion_init_from_y_rotation
cogl_quaternion_init_from_z_rotation
cogl_quaternion_equal
cogl_quaternion_copy
cogl_quaternion_free
cogl_quaternion_get_rotation_angle
cogl_quaternion_get_rotation_axis
cogl_quaternion_normalize
cogl_quaternion_dot_product
cogl_quaternion_invert
cogl_quaternion_multiply
cogl_quaternion_pow
cogl_quaternion_slerp
cogl_quaternion_nlerp
cogl_quaternion_squad
cogl_get_static_identity_quaternion
cogl_get_static_zero_quaternion
Since it's experimental API you'll need to define
COGL_ENABLE_EXPERIMENTAL_API before including cogl.h.
cogl-pango is conceptually a separate library so it doesn't seem
appropriate to bundle the headers with all the other cogl headers. Also
in-tree the headers live in a cogl-pango directory so if we want
examples that can include cogl-pango consistently when built in or out
of tree using the convention #include <cogl-pango/cogl-pango.h> makes
that easy.
This adds a compatibility cogl/cogl-pango.h header that's will redirect
to cogl-pango/cogl-pango.h with a warning, or result in an error if
COGL_ENABLE_EXPERIMENTAL_2_0_API is defined.
When freeing a framebuffer stack it's possible to have entries with NULL
draw or read buffers so we should check that before calling
cogl_onscreen/offscreen_free. This fixes a crash with the wayland
backend when running conformance tests such as cogl-test-object which
never push a framebuffer.
To support toolkits targeting wayland and using Cogl we allow toolkits
to be responsible for connecting to a wayland display and asking Cogl to
use the toolkit owned display and compositor object. Note: eventually
the plan is that wayland will allow retrospective querying of objects so
we won't need the foreign compositor API when Cogl can simply query it
from the foreign display.
The EGL API doesn't provide for a way to explicitly select a platform
when the driver can support multiple. Mesa allows selection using an
EGL_PLATFORM environment variable though so we set that to "wayland"
when we know that's what we want.
Some places were using COGL_HAS_WIN32 but the only macro defined is
COGL_HAS_WIN32_SUPPORT. The similar macros such as COGL_HAS_XLIB are
only defined for compatibility with existing code but COGL_HAS_WIN32
was never defined so there's no need to support it.
One of the places was including the non-existant cogl-win32.h. This
has been removed because the file only temporarily existed during
development of the backend.
In update_primitive_attributes it tries to fill in an array of
pointers with a NULL terminator. However it was only allocating enough
space for a pointer for each of the attributes plus one byte instead
of plus enough bytes for another pointer.
Thomas Wood found this bug with static analysis.
All of the winsys backends didn't handle cleaning up the CoglOnscreen
properly so that they would assert in cogl_onscreen_free because the
winsys pointer is never freed. They also didn't cope if deinit is
called before init (which will be the case if an onscreen is created
and freed without being allocated).
When SetPixelFormat fails, the DC would get released but none of the
other resources would be freed. This patch makes it call
_cogl_winsys_onscreen_deinit on failure to clean up all of the
resources. The patch looks big because it moves the onscreen_deinit
and onscreen_bind functions.
Some of the virtual functions in CoglWinsysVtable only need to be
implemented for specific backends or when a specific feature is
advertised. This splits the vtable struct into two commented sections
marking which are optional and which are required. Wherever an
optional function is used there is now a g_return_if_fail to ensure
there is an implementation.
Wayland now supports integration via standard eglSurfaces which makes it
possible to share more code with other EGL platforms. (though at some
point cogl-winsys-egl.c really needs to gain a more formal
CoglEGLPlatform abstraction so we can rein back on the amount of #ifdefs
we have.)
This removes all the remnants from being able to build Cogl standalone
while it was part of the Clutter repository. Now that Cogl has been
split out then standalone builds are the only option.
We now install cogl-pango-1.0 and cogl-pango-2.0 pkg-config files that
applications should optionally depend on if they want to use the
cogl_pango API.
If a foreign xid has been set on a CoglOnscreen then
cogl_onscreen_x11_get_window_xid doesn't need to defer to the winsys to
get the underlying window xid. This also means it's possible to read
back the xid before the framebuffer is allocated which fixes a crash in
the x11-foreign example app.
Ideally we wouldn't have any private symbols exported, but for now there
are some APIs that coglpango needs access to that aren't public so we
have ensure they are exported. The aim is to get rid of this need at
some point.
When comparing the wrap modes of two pipeline layers it now considers
COGL_WRAP_MODE_AUTOMATIC to be equivalent to CLAMP_TO_EDGE. By the
time the pipeline is in the journal, the upper primitive code is
expected to have overridden this wrap mode with something else if it
wants any other behaviour. This is important for getting text to batch
together with textures because the text explicitly sets the wrap mode
to CLAMP_TO_EDGE on its pipeline.
This adds cogl_atlas_texture_* functions to register a callback that
will get invoked whenever any of the CoglAtlas's the textures use get
reorganized. The callback is global and is not tied to any particular
atlas texture.
This adds a new function called _cogl_atlas_texture_new_with_size. The
old new_from_bitmap function now just calls this and updates the
texture with the data.
This extends cogl_onscreen_x11_set_foreign_xid to take a callback to a
function that details the event mask the Cogl requires the application
to select on foreign windows. This is required because Cogl, for
example, needs to track size changes of a window and may also in the
future want other notifications such as map/unmap.
Most applications wont need to use the foreign xwindow apis, but those
that do are required to pass a valid callback and update the event mask
of their window according to Cogl's requirements.
This adds Cogl API to show and hide onscreen framebuffers. We don't want
to go too far down the road of abstracting window system APIs with Cogl
since that would be out of its scope but the previous idea that we would
automatically map framebuffers on allocation except for those made from
foreign windows wasn't good enough. The problem is that we don't want to
make Clutter always create stages from foreign windows but with the
automatic map semantics then Clutter doesn't get an opportunity to
select for all the events it requires before mapping. This meant that we
wouldn't be delivered a mouse enter event for windows mapped underneath
the cursor which would break Clutters handling of button press events.
When building on windows for example we need to ensure we pass
-no-undefined to the linker. Although we were substituting a
COGL_EXTRA_LDFLAGS variable from our configure.ac we forgot to
reference that when linking cogl.
Until Cogl gains native win32/OSX support this remove the osx and win32
winsys files and instead we'll just rely on the stub-winsys.c to handle
these platforms. Since the only thing the platform specific files were
providing anyway was a get_proc_address function; it was trivial to
simply update the clutter backend code to handle this directly for now.
This is a workaround for a bug on OSX for some radeon hardware that
we can't verify and the referenced bug link is no longer valid.
If this is really still a problem then a new bug should be opened and we
can look at putting the fix in some more appropriate place than
cogl-gl.c
For now we are going for the semantics that when a CoglOnscreen is first
allocated then it will automatically be mapped. This is for convenience
and if you don't want that behaviour then it is possible to instead
create an Onscreen from a foreign X window and in that case it wont be
mapped automatically.
This approach means that Cogl doesn't need onscreen_map/unmap functions
but it's possible we'll decide later that we can't avoid adding such
functions and we'll have to change these semantics.
This allows more detailed control over the driver and winsys features
that Cogl should have. Cogl is designed so it can support multiple
window systems simultaneously so we have enable/disable options for
the drivers (gl vs gles1 vs gles2) and options for the individual window
systems; currently glx and egl. Egl is broken down into an option
for each platform.
The GDL API is used for example on intel ce4100 (aka Sodaville) based
systems as a way to allocate memory that can be composited using the
platforms overlay hardware. This updates the Cogl EGL winsys and the
support in Clutter so we can continue to support these platforms.
So that we can dynamically select what winsys backend to use at runtime
we need to have some indirection to how code accesses the winsys instead
of simply calling _cogl_winsys* functions that would collide if we
wanted to compile more than one backend into Cogl.
This moves the GLX specific code from cogl-texture-pixmap-x11.c into
cogl-winsys-glx.c. If we want the winsys components to by dynamically
loadable then we can't have GLX code scattered outside of
cogl-winsys-glx.c. This also sets us up for supporting the
EGL_texture_from_pixmap extension which is almost identical to the
GLX_texture_from_pixmap extension.
As was recently done for the GLX window system code, this commit moves
the EGL window system code down from the Clutter backend code into a
Cogl winsys.
Note: currently the cogl/configure.ac is hard coded to only build the GLX
winsys so currently this is only available when building Cogl as part
of Clutter.
The "DRM_SURFACELESS" EGL platform was invented when we were adding the
wayland backend to Clutter but in the end we added a dedicated backend
instead of extending the EGL backend so actually the platform name isn't
used.
Commit b061f737 moved _cogl_winsys_has_feature to the common winsys
code so there's no need to define it in the stub winsys any more. This
was breaking builds for backends using the stub winsys.
The comparison for finding onscreen framebuffers in
find_onscreen_for_xid had a small thinko so that it would ignore
framebuffers when the negation of the type is onscreen. This ends up
doing the right thing anyway because the onscreen type has the value 0
and the offscreen type has the value 1 but presumably it would fail if
we ever added any other framebuffer types.
The code for _cogl_winsys_has_feature will be identical in all of the
winsys backends for the time being, so it seems to make sense to have
it in the common cogl-winsys.c file.
Previously the mask of available winsys features was stored in a
CoglBitmask. That isn't the ideal type to use for this because it is
intended for a growable array of bits so it can allocate extra memory
if there are more than 31 flags set. For the winsys feature flags the
highest used bit is known at compile time so it makes sense to
allocate a fixed array instead. This is conceptually similar to the
CoglDebugFlags which are stored in an array of integers with macros to
test a bit in the array. This moves the macros used for CoglDebugFlags
to cogl-flags.h and makes them more generic so they can be shared with
CoglContext.
Instead of having cogl_renderer_xlib_add_filter and friends there is
now cogl_renderer_add_native_filter which can be used regardless of
the backend. The callback function for the filter now just takes a
void pointer instead of an XEvent pointer which should be interpreted
differently depending on the backend. For example, on Xlib it would
still be an XEvent but on Windows it could be a MSG. This simplifies
the code somewhat because the _cogl_xlib_add_filter no longer needs to
have its own filter list when a stub renderer is used because there is
always a renderer available.
cogl_renderer_xlib_handle_event has also been renamed to
cogl_renderer_handle_native_event. This just forwards the event on to
all of the listeners. The backend renderer is expected to register its
own event filter if it wants to process the events in some way.
Older drivers for PowerVR SGX hardware have the vendor-specific
GL_IMG_TEXTURE_NPOT extension instead of the
functionally-equivalent GL_OES_TEXTURE_NPOT extension.
We need to guard the usage of symbols related to the
GLX_INTEL_swap_event extension, to avoid breaking on platforms and/or
versions of Mesa that do not expose that extension.
It's generally useful to be able to query the width and height of a
framebuffer and we expect to need this in Clutter when we move the
eglnative backend code into Cogl since Clutter will need to read back
the fixed size of the framebuffer when realizing the stage.
This backend hasn't been used for years now and so because it is
untested code and almost certainly doesn't work any more it would be a
burdon to continue trying to maintain it. Considering that we are now
looking at moving OpenGL window system integration code down from
Clutter backends into Cogl that will be easier if we don't have to
consider this backend.
This adds an autogen.sh, configure.ac and build/autotool files etc under
clutter/cogl and makes some corresponding Makefile.am changes that make
it possible to build and install Cogl as a standalone library.
Some notable things about this are:
A standalone installation of Cogl installs 3 pkg-config files;
cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for
compatibility with what clutter installed though I'm not sure that
anything uses it so maybe we could remove it. cogl-1.0.pc is what
Clutter would use if it were updated to build against a standalone cogl
library. cogl-2.0.pc is what you would use if you were writing a
standalone Cogl application.
A standalone installation results in two libraries currently, libcogl.so
and libcogl-pango.so. Notably we don't include a major number in the
sonames because libcogl supports two major API versions; 1.x as used by
Clutter and the experimental 2.x API for standalone applications.
Parallel installation of later versions e.g. 3.x and beyond will be
supportable either with new sonames or if we can maintain ABI then we'll
continue to share libcogl.so.
The headers are similarly not installed into a directory with a major
version number since the same headers are shared to export the 1.x and
2.x APIs (The only difference is that cogl-2.0.pc ensures that
-DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of
later versions is not precluded though since we can either continue
sharing or later add a major version suffix.
This migrates all the GLX window system code down from the Clutter
backend code into a Cogl winsys. Moving OpenGL window system binding
code down from Clutter into Cogl is the biggest blocker to having Cogl
become a standalone 3D graphics library, so this is an important step in
that direction.
As part of the process of splitting Cogl out as a standalone graphics
API we need to introduce some API concepts that will allow us to
initialize a new CoglContext when Clutter isn't there to handle that for
us...
The new objects roughly in the order that they are (optionally) involved
in constructing a context are: CoglRenderer, CoglOnscreenTemplate,
CoglSwapChain and CoglDisplay.
Conceptually a CoglRenderer represents a means for rendering. Cogl
supports rendering via OpenGL or OpenGL ES 1/2.0 and those APIs are
accessed through a number of different windowing APIs such as GLX, EGL,
SDL or WGL and more. Potentially in the future Cogl could render using
D3D or even by using libdrm and directly banging the hardware. All these
choices are wrapped up in the configuration of a CoglRenderer.
Conceptually a CoglDisplay represents a display pipeline for a renderer.
Although Cogl doesn't aim to provide a detailed abstraction of display
hardware, on some platforms we can give control over multiple display
planes (On TV platforms for instance video content may be on one plane
and 3D would be on another so a CoglDisplay lets you select the plane
up-front.)
Another aspect of CoglDisplay is that it lets us negotiate a display
pipeline that best supports the type of CoglOnscreen framebuffers we are
planning to create. For instance if you want transparent CoglOnscreen
framebuffers then we have to be sure the display pipeline wont discard
the alpha component of your framebuffers. Or if you want to use
double/tripple buffering that requires support from the display
pipeline.
CoglOnscreenTemplate and CoglSwapChain are how we describe our default
CoglOnscreen framebuffer configuration which can affect the
configuration of the display pipeline.
The default/simple way we expect most CoglContexts to be constructed
will be via something like:
if (!cogl_context_new (NULL, &error))
g_error ("Failed to construct a CoglContext: %s", error->message);
Where that NULL is for an optional "display" parameter and NULL says to
Cogl "please just try to do something sensible".
If you want some more control though you can manually construct a
CoglDisplay something like:
display = cogl_display_new (NULL, NULL);
cogl_gdl_display_set_plane (display, plane);
if (!cogl_display_setup (display, &error))
g_error ("Failed to setup a CoglDisplay: %s", error->message);
And in a similar fashion to cogl_context_new() you can optionally pass
a NULL "renderer" and/or a NULL "onscreen template" so Cogl will try to
just do something sensible.
If you need to change the CoglOnscreen defaults you can provide a
template something like:
chain = cogl_swap_chain_new ();
cogl_swap_chain_set_has_alpha (chain, TRUE);
cogl_swap_chain_set_length (chain, 3);
onscreen_template = cogl_onscreen_template_new (chain);
cogl_onscreen_template_set_pixel_format (onscreen_template,
COGL_PIXEL_FORMAT_RGB565);
display = cogl_display_new (NULL, onscreen_template);
if (!cogl_display_setup (display, &error))
g_error ("Failed to setup a CoglDisplay: %s", error->message);
This tries to make the naming style of files under cogl/winsys/
consistent with other cogl source files. In particular private header
files didn't have a '-private' infix.
This gives us a way to clearly track the internal Cogl API that Clutter
depends on. The aim is to split Cogl out from Clutter into a standalone
3D graphics API and eventually we want to get rid of any private
interfaces for Clutter so its useful to have a handle on that task.
Actually it's not as bad as I was expecting though.
This renames the two internal functions _cogl_get_draw/read_buffer
as cogl_get_draw_framebuffer and _cogl_get_read_framebuffer. The
former is now also exposed as experimental API.
The long term goal with the Cogl API is that we will get rid of the
default global context. As a step towards this, this patch tracks a
reference back to the context in each CoglFramebuffer so in a lot of
cases we can avoid using the _COGL_GET_CONTEXT macro.
There is no corresponding implementation of _cogl_features_init any more
so it was simply an oversight that the prototype wasn't removed when the
implementation was removed.
Recently _cogl_swap_buffers_notify was added (in 142b229c5c) so that
Cogl would be notified when Clutter performs a swap buffers request for
a given onscreen framebuffer. It was expected this would be required for
the recent cogl_read_pixel optimization that was implemented (ref
1bdb0e6e98) but in the end it wasn't used.
Since it wasn't used in the end this patch removes the API.
This moves the functionality of _cogl_create_context_driver from
driver/{gl,gles}/cogl-context-driver-{gl,gles}.c into
driver/{gl,gles}/cogl-{gl,gles}.c as a static function called
initialize_context_driver.
cogl-context-driver-{gl,gles}.[ch] have now been removed.
This adds a new experimental function (you need to define
COGL_ENABLE_EXPERIMENTAL_API to access it) which takes us towards being
able to have a standalone Cogl API. This is really a minor aesthetic
change for now since all the GL context creation code still lives in
Clutter but it's a step forward none the less.
Since our current designs introduce a CoglDisplay object as something
that would be passed to the context constructor this provides a stub
cogl-display.h with CoglDisplay typedef.
_cogl_context_get_default() which Clutter uses to access the Cogl
context has been modified to use cogl_context_new() to initialize
the default context.
There is one rather nasty hack used in this patch which is that the
implementation of cogl_context_new() has to forcibly make the allocated
context become the default context because currently all the code in
Cogl assumes it can access the context using _COGL_GET_CONTEXT including
code used to initialize the context.
In _cogl_pipeline_prune_empty_layer_difference if the layer's parent
has no owner then it just takes ownership of it. However this could
theoretically end up taking ownership of the root layer because
according to the comment above in the same function that should never
have an owner. This patch just adds an extra check to ensure that the
unowned layer has a parent.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2588
In _cogl_pipeline_prune_empty_layer_difference if we are reverting to
the immediate parent of an empty/redundant layer then it is not enough
to simply add a reference to the pipeline's ->layer_differences list
without also updating parent_layer->owner to point back to its new
owner.
This oversight was leading us to break the invariable that all layers
referenced in layer_differences have an owner and was also causing us to
break another invariable whereby after calling
_cogl_pipeline_layer_pre_change_notify the returned layer must always be
owned by the given 'required_owner'.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2588
glib already has a data type to manage a list of callbacks called a
GHookList so we might as well use it instead of maintaining Cogl's own
type. The glib version may be slightly more efficient because it
avoids using a GList and instead encodes the prev and next pointers
directly in the GHook structure. It also has more features than
CoglCallbackList.
Previously we were applying the culling optimization to any actor
painted without considering that we may be painting to an offscreen
framebuffer where the stage clip isn't applicable.
For now we simply expose a getter for the current draw framebuffer
and we can assume that a return value of NULL corresponds to the
stage.
Note: This will need to be updated as stages start to be backed by real
CoglFramebuffer objects and so we won't get NULL in those cases.
Drawing and clipping to paths is generally quite expensive because the
geometry has to be tessellated into triangles in a single VBO which
breaks up the journal batching. If we can detect when the path
contains just a single rectangle then we can instead divert to calling
cogl_rectangle which will take advantage of the journal, or by pushing
a rectangle clip which usually ends up just using the scissor.
This patch adds a boolean to each path to mark when it is a
rectangle. It gets cleared whenever a node is added or gets set to
TRUE whenever cogl2_path_rectangle is called. This doesn't try to
catch cases where a rectangle is composed by cogl_path_line_to and
cogl_path_move_to commands.
In 9ff04e8a99 the builtin uniforms were moved to the common shader
boilerplate. However the common boilerplate is positioned before the
default precision specifier on GLES2 so it would fail to compile
because the uniforms end up with no precision in the fragment
shader. This patch just moves the precision specifier to above the
common boilerplate.
Instead of unconditionally combining the modelview and projection
matrices and then iterating each of the vertices to call
cogl_matrix_transform_point for each one in turn we now only combine the
matrices if there are more than 4 vertices (with less than 4 vertices
its less work to transform them separately) and we use the new
cogl_vertex_{transform,project}_points APIs which can hopefully
vectorize the transformations.
Finally the perspective divide and viewport scale is done in a separate
loop at the end and we don't do the spurious perspective divide and
viewport scale for the z component.
This adds two new experimental functions to cogl-matrix.c:
cogl_matrix_view_2d_in_perspective and cogl_matrix_view_2d_in_frustum
which can be used to setup a view transform that maps a 2D coordinate
system (0,0) top left and (width,height) bottom right to the current
viewport.
Toolkits such as Clutter that want to mix 2D and 3D drawing can use
these APIs to position a 2D coordinate system at an arbitrary depth
inside a 3D perspective projected viewing frustum.
OpenGL < 4.0 only supports integer based viewports and internally we
have a mixture of code using floats and integers for viewports. This
patch switches all viewports throughout clutter and cogl to be
represented using floats considering that in the future we may want to
take advantage of floating point viewports with modern hardware/drivers.
This makes a change to the original point_in_poly algorithm from:
http://www.ecse.rpi.edu/Homepages/wrf/Research/Short_Notes/pnpoly.html
The aim was to tune the test so that tests against screen aligned
rectangles are more resilient to some in-precision in how we transformed
that rectangle into screen coordinates. In particular gnome-shell was
finding that for some stage sizes then row 0 of the stage would become a
dead zone when going through the software picking fast-path and this was
because the y position of screen aligned rectangles could end up as
something like 0.00024 and the way the algorithm works it doesn't have
any epsilon/fuz factor to consider that in-precision.
We've avoided introducing an epsilon factor to the comparisons since we
feel there's a risk of changing some semantics in ways that might not be
desirable. One of those is that if you transform two polygons which
share an edge and test a point close to that edge then this algorithm
will currently give a positive result for only one polygon.
Another concern is the way this algorithm resolves the corner case where
the horizontal ray being cast to count edge crossings may cross directly
through a vertex. The solution is based on the "idea of Simulation of
Simplicity" and "pretends to shift the ray infinitesimally down so that
it either clearly intersects, or clearly doesn't touch". I'm not
familiar with the idea myself so I expect a misplaced epsilon is likely
to break that aspect of the algorithm.
The simple solution this patch applies is to pixel align the polygon
vertices which should eradicate most noise due to in-precision.
https://bugzilla.gnome.org/show_bug.cgi?id=641197
When using a pipeline and the journal to blit images between
framebuffers, it should disable blending. Otherwise it will end up
blending the source texture with uninitialised garbage in the
destination texture.
If an atlas texture's last reference is held by the journal or by the
last flushed pipeline then if an atlas migration is started it can
cause a crash. This is because the atlas migration will cause a
journal flush and can sometimes change the current pipeline which
means that the texture would be destroyed during migration.
This patch adds an extra 'post_reorganize' callback to the existing
'reorganize' callback (which is now renamed to 'pre_reorganize'). The
pre_reorganize callback is now called before the atlas grabs a list of
the current textures instead of after so that it doesn't matter if the
journal flush destroys some of those textures. The pre_reorganize
callback for CoglAtlasTexture grabs a reference to all of the textures
so that they can not be destroyed when the migration changes the
pipeline. In the post_reorganize callback the reference is removed
again.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2538
When Cogl debugging is disabled then the 'waste' variable is not used
so it throws a compiler warning. This patch removes the variable and
the value is calculated directly as the parameter to COGL_NOTE.
Some code was doing pointer arithmetic on the return value from
cogl_buffer_map which is void* pointer. This is a GCC extension so we
should try to avoid it. This patch adds casts to guint8* where
appropriate.
Based on a patch by Fan, Chun-wei.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2561
Instead of directly banging GL to migrate textures the atlas now uses
the CoglFramebuffer API. It will use one of four approaches; it can
set up two FBOs and use _cogl_blit_framebuffer to copy between them;
it can use a single target fbo and then render the source texture to
the FBO using a Cogl draw call; it can use a single FBO and call
glCopyTexSubImage2D; or it can fallback to reading all of the texture
data back to system memory and uploading it again with a sub texture
update.
Previously GL calls were used directly because Cogl wasn't able to
create a framebuffer without a stencil and depth buffer. However there
is now an internal version of cogl_offscreen_new_to_texture which
takes a set of flags to disable the two buffers.
The code for blitting has now been moved into a separate file called
cogl-blit.c because it has become quite long and it may be useful
outside of the atlas at some point.
The 4 different methods have a fixed order of preference which is:
* Texture render between two FBOs
* glBlitFramebuffer
* glCopyTexSubImage2D
* glGetTexImage + glTexSubImage2D
Once a method is succesfully used it is tried first for all subsequent
blits. The default default can be overridden by setting the
environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the
following values:
* texture-render
* framebuffer
* copy-tex-sub-image
* get-tex-data
This adds a declaration for _cogl_is_texture_2d to the private header
so that it can be used in cogl-blit.c to determine if the target
texture is a simple 2D texture.
This adds a function called _cogl_texture_2d_copy_from_framebuffer
which is a simple wrapper around glCopyTexSubImage2D. It is currently
specific to the texture 2D backend.
This adds the _cogl_blit_framebuffer internal function which is a
wrapper around glBlitFramebuffer. The API is changed from the GL
version of the function to reflect the limitations provided by the
GL_ANGLE_framebuffer_blit extension (eg, no scaling or mirroring).
This extension is the GLES equivalent of the GL_EXT_framebuffer_blit
extension except that it has some extra restrictions. We need to check
for some extension that provides glBlitFramebuffer so that we can
unconditionally use ctx->drv.pf_glBlitFramebuffer in both GL and GLES
code. Even with the restrictions, the extension provides enough
features for what Cogl needs.
Previously when _cogl_atlas_texture_migrate_out_of_atlas is called it
would unreference the atlas texture's sub-texture before calling
_cogl_atlas_copy_rectangle. This would leave the atlas texture in an
inconsistent state during the copy. This doesn't normally matter but
if the copy ends up doing a render then the atlas texture may end up
being referenced. In particular it would cause problems if the texture
is left in a texture unit because then Cogl may try to call
get_gl_texture even though the texture isn't actually being used for
rendering. To fix this the sub texture is now unrefed after the copy
call instead.
The current framebuffer is now internally separated so that there can
be a different draw and read buffer. This is required to use the
GL_EXT_framebuffer_blit extension. The current draw and read buffers
are stored as a pair in a single stack so that pushing the draw and
read buffer is done simultaneously with the new
_cogl_push_framebuffers internal function. Calling
cogl_pop_framebuffer will restore both the draw and read buffer to the
previous state. The public cogl_push_framebuffer function is layered
on top of the new function so that it just pushes the same buffer for
both drawing and reading.
When flushing the framebuffer state, the cogl_framebuffer_flush_state
function now tackes a pointer to both the draw and the read
buffer. Anywhere that was just flushing the state for the current
framebuffer with _cogl_get_framebuffer now needs to call both
_cogl_get_draw_buffer and _cogl_get_read_buffer.
When pushing a framebuffer it would previously push
COGL_INVALID_HANDLE to the top of the framebuffer stack so that when
it later calls cogl_set_framebuffer it will recognise that the
framebuffer is different and replace the top with the new
pointer. This isn't ideal because it breaks the code to flush the
journal because _cogl_framebuffer_flush_journal is called with the
value of the old pointer which is NULL. That function was checking for
a NULL pointer so it wouldn't actually flush. It also would mean that
if you pushed the same framebuffer twice we would end up dirtying
state unnecessarily. To fix this cogl_push_framebuffer now pushes a
reference to the current framebuffer instead.
After a dependent framebuffer is added to a framebuffer it was never
getting removed. Once the journal for a framebuffer is flushed we no
longer depend on any framebuffers so the list should be cleared. This
was causing leaks of offscreens and textures.
This adds a note to clarify that cogl_matrix_multiply allows you to
multiply the @a matrix in-place, so @a can equal @result but @b can't
equal @result.
When uploading the layer matrix to GL it wasn't first calling
glActiveTextureMatrix to set the right texture unit for the
layer. This would end up setting the texture matrix on whatever layer
happened to be previously active. This happened to work for
test-cogl-multitexture presumably because it was coincidentally
setting the layer matrix on the last used layer.
The pipeline private data is accessed both from the private data set
on a CoglPipeline and the destroy notify function of a weak material
that the vertex buffer creates when it needs to override the wrap
mode. However when a CoglPipeline is destroyed, the CoglObject code
first removes all of the private data set on the object and then the
CoglPipeline code gets invoked to destroy all of the weak children. At
this point the vertex buffer's weak override destroy notify function
will get invoked and try to use the private data which has already
been freed causing a crash.
This patch instead adds a reference count to the pipeline private data
stuct so that we can avoid freeing it until both the private data on
the pipeline has been destroyed and all of the weak materials are
destroyed.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2544
In cogl_pipeline_set_layer_combine_constant it was comparing whether
the new color is the same as the old color using a memcmp on the
constant_color parameter. However the combine constant is stored in
the layer data as an array of four floats but the passed in color is a
CoglColor (which is currently an array of four guint8s). This was
causing valgrind errors and presumably also the check for setting the
same color twice would always fail.
This patch makes it do the conversion to a float array upfront before
the comparison.
cogl_matrix_project_points and cogl_matrix_transform_points had an
optimization for the common case where the stride parameters exactly
match the size of the corresponding structures. The code for both when
generated by gcc with -O2 on x86-64 use two registers to hold the
addresses of the input and output arrays. In the strided version these
pointers are incremented by adding the value of a register and in the
packed version they are incremented by adding an immediate value. I
think the difference in cost here would be negligible and it may even
be faster to add a register.
Also GCC appears to retain the loop counter in a register for the
strided version but in the packed version it can optimize it out and
directly use the input pointer as the counter. I think it would be
possible to reorder the code a bit to explicitly use the input pointer
as the counter if this were a problem.
Getting rid of the packed versions tidies up the code a bit and it
could potentially be faster if the code differences are small and we
get to avoid an extra conditional in cogl_matrix_transform_points.
When copying COMBINE state in
_cogl_pipeline_layer_init_multi_property_sparse_state we would read some
state from the destination layer (invalid data potentially), then
redundantly set the value back on the destination. This was picked up by
valgrind, and the code is now more careful about how it references the
src layer vs the destination layer.
There is currently a problem with per-framebuffer journals in that it's
possible to create a framebuffer from a texture which then gets rendered
too but the framebuffer (and corresponding journal) can be freed before
the texture gets used to draw with.
Conceptually we want to make sure when freeing a framebuffer that - if
it is associated with a texture - we flush the journal as the last thing
before really freeing the framebuffer's meta data. Technically though
this is awkward to implement since the obvious mechanism for us to be
notified about the framebuffer's destruction (by setting some user data
internally with a callback) notifies when the framebuffer has a
ref-count of 0. This means we'd have to be careful what we do with the
framebuffer to consider e.g. recursive destruction; anything that would
set more user data on the framebuffer while it is being destroyed and
ensuring nothing else gets notified of the framebuffer's destruction
before the journal has been flushed.
For simplicity, for now, this patch provides another solution which is
to flush framebuffer journals whenever we switch away from a given
framebuffer via cogl_set_framebuffer or cogl_push/pop_framebuffer. The
disadvantage of this approach is that we can't batch all the geometry of
a scene that involves intermediate renders to offscreen framebufers.
Clutter is doing this more and more with applications that use the
ClutterEffect APIs so this is a shame. Hopefully this will only be a
stop-gap solution while we consider how to reliably support journal
logging across framebuffer changes.
When flushing a clip stack that contains more than one rectangle which
needs to use the stencil buffer the code takes a different path so
that it can combine the new rectangle with the existing contents of
the stencil buffer. However it was not correctly flushing the
modelview and projection matrices so that rectangle would be in the
wrong place.
This adds a COGL_DEBUG=clipping option that reports how the clip is
being flushed. This is needed to determine whether the scissor,
stencil clip planes or software clipping is being used.
The CoglDebugFlags are now stored in an array of unsigned ints rather
than a single variable. The flags are accessed using macros instead of
directly peeking at the cogl_debug_flags variable. The index values
are stored in the enum rather than the actual mask values so that the
enum doesn't need to be more than 32 bits wide. The hope is that the
code to determine the index into the array can be optimized out by the
compiler so it should have exactly the same performance as the old
code.
The lighting parameters such as the diffuse and ambient colors were
previously only flushed in the fixed vertend. This meant that if a
vertex shader was used then they would not be set. The lighting
parameters are uniforms which are just as useful in a fragment shader
so it doesn't really make sense to set them in the vertend. They are
now flushed in the common cogl-pipeline-opengl code but the code is
#ifdef'd for GLES2 because they need to be part of the progend in that
case.
The uniforms for the alpha test reference value and point size on
GLES2 are updating using similar code. This generalizes the code so
that there is a static array of predefined builtin uniforms which
contains the uniform name, a pointer to a function to get the value
from the pipeline, a pointer to a function to update the uniform and a
flag representing which CoglPipelineState change affects the
uniform. The uniforms are then updated in a loop. This should simplify
adding more builtin uniforms.
The builtin uniforms are accessible from either the vertex shader or
the fragment shader so we should define them in the common
section. This doesn't really matter for the current list of uniforms
because it's pretty unlikely that you'd want to access the matrices
from the fragment shader, but for other builtins such as the lighting
material properties it makes sense.
When we added the texture->framebuffers member a _cogl_texture_init
funciton was added to initialize the list of framebuffers associated
with a texture to NULL. All the backends were updated except the
x11 tfp backend. This was causing crashes in test-pixmap.
This is part of a broader cleanup of some of the experimental Cogl API.
One of the reasons for this particular rename is to reduce the verbosity
of using the API. Another reason is that CoglVertexArray is going to be
renamed CoglAttributeBuffer and we want to help emphasize the
relationship between CoglAttributes and CoglAttributeBuffers.
We have a bunch of experimental convenience functions like
cogl_primitive_p2/p2t2 that have corresponding vertex structures but it
seemed a bit odd to have the vertex annotation e.g. "P2T2" be an infix
of the type like CoglP2T2Vertex instead of be a postfix like
CoglVertexP2T2. This switches them all to follow the postfix naming
style.
COGL_DEBUG=disable-fast-read-pixel can be used to disable the
optimization for reading a single pixel colour back by looking at the
geometry in the journal and not involving the GPU. With this disabled we
will always flush the journal, rendering to the framebuffer and then use
glReadPixels to get the result.
This adds a transparent optimization to cogl_read_pixels for when a
single pixel is being read back and it happens that all the geometry of
the current frame is still available in the framebuffer's associated
journal.
The intention is to indirectly optimize Clutter's render based picking
mechanism in such a way that the 99% of cases where scenes are comprised
of trivial quad primitives that can easily be intersected we can avoid
the latency of kicking a GPU render and blocking for the result when we
know we can calculate the result manually on the CPU probably faster
than we could even kick a render.
A nice property of this solution is that it maintains all the
flexibility of the render based picking provided by Clutter and it can
gracefully fall back to GPU rendering if actors are drawn using anything
more complex than a quad for their geometry.
It seems worth noting that there is a limitation to the extensibility of
this approach in that it can only optimize picking a against geometry
that passes through Cogl's journal which isn't something Clutter
directly controls. For now though this really doesn't matter since
basically all apps should end up hitting this fast-path. The current
idea to address this longer term would be a pick2 vfunc for ClutterActor
that can support geometry and render based input regions of actors and
move this optimization up into Clutter instead.
Note: currently we don't have a primitive count threshold to consider
that there could be scenes with enough geometry for us to compensate for
the cost of kicking a render and determine a result more efficiently by
utilizing the GPU. We don't currently expect this to be common though.
Note: in the future it could still be interesting to revive something
like the wip/async-pbo-picking branch to provide an asynchronous
read-pixels based optimization for Clutter picking in cases where more
complex input regions that necessitate rendering are in use or if we do
add a threshold for rendering as mentioned above.
Both cogl_matrix_transform_points and _project_points take points_in and
points_out arguments and explicitly allow pointing to the same array
(i.e. to transform in-place) The implementation of the various internal
transform functions though were not handling this possability and so it
was possible the reference partially transformed vertex values as if
they were original input values leading to incorrect results. This patch
ensures we take a temporary copy of the current input point when
transforming.
This adds a utility function that can determine if a given point
intersects an arbitrary polygon, by counting how many edges a
"semi-infinite" horizontal ray crosses from that point. The plan is to
use this for a software based read-pixel fast path that avoids using the
GPU to rasterize journaled primitives and can instead intersect a point
being read with quads in the journal to determine the correct color.
This adds a stop-gap mechanism for Cogl to know when the window system
is requested to present the current backbuffer to the frontbuffer by
adding a _cogl_swap_buffers_notify function that backends are now
expected to call right after issuing the equivalent request to OpenGL
vie the platforms OpenGL binding layer. This (blindly) updates all the
backends to call this new function.
For now Cogl doesn't do anything with the notification but the intention
is to use it as part of a planned read-pixel optimization which will
need to reset some state at the start of each new frame.
Instead of having _cogl_get/set_clip stack which reference the global
CoglContext this instead makes those into CoglClipState method functions
named _cogl_clip_state_get/set_stack that take an explicit pointer to a
CoglClipState.
This also adds _cogl_framebuffer_get/set_clip_stack convenience
functions that avoid having to first get the ClipState from a
framebuffer then the stack from that - so we can maintain the
convenience of _cogl_get_clip_stack.
This adds an internal function to be able to query the screen space
bounding box of the current clip entries contained in a given
CoglClipStack.
This bounding box which is cheap to determine can be useful to know the
largest extents that might be updated while drawing with this clip
stack.
For example the plan is to use this as part of an optimized read-pixel
path handled on the CPU which will need to track the currently valid
extents of the last call to cogl_clear()
Instead of having a single journal per context, we now have a
CoglJournal object for each CoglFramebuffer. This means we now don't
have to flush the journal when switching/pushing/popping between
different framebuffers so for example a Clutter scene that involves some
ClutterEffect actors that transiently redirect to an FBO can still be
batched.
This also allows us to track state in the journal that relates to the
current frame of its associated framebuffer which we'll need for our
optimization for using the CPU to handle reading a single pixel back
from a framebuffer when we know the whole scene is currently comprised
of simple rectangles in a journal.
This adds an internal alternative to cogl_object_set_user_data that also
passes an instance pointer to destroy notify callbacks.
When setting private data on a CoglObject it's often desirable to know
the instance being destroyed when we are being notified to free the
private data due to the object being freed. The typical solution to this
is to track a pointer to the instance in the private data itself so it
can be identified but that usually requires an extra micro allocation
for the private data that could have been avoided if only the callback
were given an instance pointer.
The new internal _cogl_object_set_user_data passes the instance pointer
as a second argument which means it is ABI compatible for us to layer
the public version on top of this internal function.
This moves the implementation of cogl_clear into cogl-framebuffer.c as
two new internal functions _cogl_framebuffer_clear and
_cogl_framebuffer_clear4f. It's not clear if this is what the API will
look like as we make more of the CoglFramebuffer API public due to the
limitations of using flags to identify buffers when framebuffers may
contain any number of ancillary buffers but conceptually it makes some
sense to tie the operation of clearing a color buffer to a framebuffer.
The short term intention is to enable tracking the current clear color
as a property of the framebuffer as part of an optimization for reading
back single pixels when the geometry is simple enough that we can
compute the result quickly on the CPU. (If the point doesn't intersect
any geometry we'll need to return the last clear color.)
Previously most of the code for cogl-program and cogl-shader was
ifdef'd out for GLES 1.1 and alternate stub definitions were
defined. This patch removes those and instead puts #ifdef's directly
in the functions that need it. This should make it a little bit easier
to maintain.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2516
When determining whether to hash the combine constant Cogl checks the
arguments to the combine funcs to determine whether the combine
constant is used. However is was using the GLenums GL_CONSTANT_COLOR
and GL_CONSTANT_ALPHA but these are not valid values for the
CoglPipelineCombineSource enum so presumably the constant would never
get hashed. This patch makes it use Cogl's enum of
COGL_PIPELINE_COMBINE_SOURCE_CONSTANT instead.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2516
GLES has an extension called GL_OES_mapbuffer to support mapping
buffer objects but only for writing. Cogl now has two new feature
flags to advertise whether mapping for reading and writing is
supported. Under OpenGL, these features are always set if the VBO
extension is advertised and under GLES only the write flag is set if
the GL_OES_mapbuffer extension is advertised.
In the journal code and when generating the stroke path the vertices
are generated on the fly and stored in a CoglBuffer using
cogl_buffer_map. However cogl_buffer_map is allowed to fail but it
wasn't checking for a NULL return value. In particular on GLES it will
always fail because glMapBuffer is only provided by an extension. This
adds a new pair of internal functions called
_cogl_buffer_{un,}map_for_fill_or_fallback which wrap
cogl_buffer_map. If the map fails then it will instead return a
pointer into a GByteArray attached to the context. When the buffer is
unmapped the array is copied into the buffer using
cogl_buffer_set_data.
On GLES2 there's no builtin mechanism to replace texture coordinates
with point sprite coordinates so calling glEnable(GL_POINT_SPRITE)
isn't valid. Instead the point sprite coords are implemented by using
a special builtin varying variable in GLSL.
There are several places where we need to compare the texture state of a
pipeline and sometimes we need to take into consideration if the
underlying texture has changed but other times we may only care to know
if the texture target has changed.
For example the fragends typically generate programs that they want to
share with all pipelines with equivalent fragment processing state, and
in this case when comparing pipelines we only care about the texture
targets since changes to the underlying texture won't affect the
programs generated.
Prior to this we had tried to handle this by passing around some special
flags to various functions that evaluate pipeline state to say when we
do/don't care about the texture data, but this wasn't working in all
cases and was more awkward to manage than the new approach.
Now we simply have two state bits:
COGL_PIPELINE_LAYER_STATE_TEXTURE_TARGET and
COGL_PIPELINE_LAYER_STATE_TEXTURE_DATA and CoglPipelineLayer has an
additional target member. Since all the appropriate code takes masks of
these state bits to determine what to evaluate we don't need any extra
magic flags.
When notifying that a pipeline property is going to change, then at
times a pipeline will take over being the authority of the corresponding
state group. Some state groups can contain multiple properties and so to
maintain the integrity of all of the properties we have to initialize
all the property values in the new authority. For state groups with only
one property we don't have to initialize anything during the
pre_change_notify() because we can assume the value will be initialized
as part of the change being notified.
This patch optimizes how we handle this initialization of state groups
in a couple of ways; firstly we no longer do anything to initialize
state-groups with only one property, secondly we no longer use
_cogl_pipeline_copy_differences - (we have a new
_cogl_pipeline_init_multi_property_sparse_state() func) so we can avoid
lots calls to handle_automatic_blend_enable() which is sometimes seen
high in sysprof profiles.
Previously atlasing would be disabled if the GL driver does not
support reading back texture data. This meant that atlasing would not
happen on GLES. However we also require that the driver support FBOs
and the texture data is only read back as a fallback if the FBO
fails. Therefore the atlas should be ok on GLES 2 which has FBO
support in core.
We try and bail out of flushing pipeline state asap if we can see the
pipeline has already been flushed and hasn't changed but we weren't
checking to see if the skip_gl_color flag is the same as when it was
last flush too and so we'd sometimes bail out without updating the
glColor correctly.
When an item is added to the journal the current pipeline immediately
gets the legacy state applied to it and the modified pipeline is
logged instead of the original. However the actual drawing from the
journal is done using the vertex attribute API which was also applying
the legacy state. This meant that the legacy state used would be a
combination of the state set when the journal entry was added as well
as the state set when the journal is flushed. To fix this there is now
an extra CoglDrawFlag to avoid applying the legacy state when setting
up the GL state for the vertex attributes. The journal uses this flag
when flushing.
The vertex attribute API assumes that if there is a color array
enabled then we can't determine if the colors are opaque so we have to
enable blending. The journal always uses a color array to avoid
switching color state between rectangles. Since the journal switched
to using vertex attributes this means we effectively always enable
blending from the journal. To fix this there is now a new flag for
_cogl_draw_vertex_attributes to specify that the color array is known
to only contain opaque colors which causes the draw function not to
copy the pipeline. If the pipeline has blending disabled then the
journal passes this flag.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2481
There is an internal version of cogl_draw_vertex_attributes_array
which previously just bypassed the framebuffer flushing, journal
flushing and pipeline validation so that it could be used to draw the
journal. This patch generalises the function so that it takes a set of
flags to specify which parts to flush. The public version of the
function now just calls the internal version with the flags set to
0. The '_real' version of the function has now been merged into the
internal version of the function because it was only called in one
place. This simplifies the code somewhat. The common code which
flushed the various state has been moved to a separate function. The
indexed versions of the functions have had a similar treatment.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2481
Cogl no longer has any code that assumes the buffer in a CoglBitmap is
allocated to the full size of height*rowstride. We should comment that
this is the case so that we remember to keep it that way. This is
important for cogl_texture_new_from_data because the application may
have created the data from a sub-region of a larger image and in that
case it's not safe to read the full rowstride of the last row when the
sub region contains the last row of the larger image.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2491
When uploading data for GLES we need to deal with cases where the
rowstride is too large to be described only by GL_UNPACK_ALIGNMENT
because there is no GL_UNPACK_ROW_LENGTH. Previously for the
sub-region uploading code it would always copy the bitmap and for the
code to upload the whole image it would copy the bitmap unless the
rowstride == bpp*width. Neither paths took into account that we don't
need to copy if the rowstride is just an alignment of bpp*width. This
moves the bitmap copying code to a separate function that is used by
both upload methods. It only copies the bitmap if the rowstride is not
just an alignment of bpp*width.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2491
The ffs function is defined in C99 so if we want to use it in Cogl we
need to provide a fallback for MSVC. This adds a configure check for
the function and then a fallback using a while loop if it is not
available.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2491
If we have to copy the bitmap to do the premultiplication then we were
previously using the rowstride of the source image as the rowstride
for the new image. This is wasteful if the source image is a subregion
of a larger image which would make it use a large rowstride. If we
have to copy the data anyway we might as well compact it to the
smallest rowstride. This also prevents the copy from reading past the
end of the last row of pixels.
An internal function called _cogl_bitmap_copy has been added to do the
copy. It creates a new bitmap with the smallest possible rowstride
rounded up the nearest multiple of 4 bytes. There may be other places
in Cogl that are currently assuming we can read height*rowstride of
the source buffer so they may want to take advantage of this function
too.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2491
The builtin vertex attribute for the normals was incorrectly checked
for as 'cogl_normal' however it is defined as cogl_normal_in in the
shader boilerplate and for the name generated by CoglVertexBuffer.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2499
The ARBfp fragend was bypassing generating a shader if the pipeline
contains a user program. However it shouldn't do this if the pipeline
only contains a vertex shader. This was breaking
test-cogl-just-vertex-shader.
Previously Cogl would only ever use one atlas for textures and if it
reached the maximum texture size then all other new textures would get
their own GL texture. This patch makes it so that we create as many
atlases as needed. This should avoid breaking up some batches and it
will be particularly good if we switch to always using multi-texturing
with a default shader that selects between multiple atlases using a
vertex attribute.
Whenever a new atlas is created it is stored in a GSList on the
context. A weak weference is taken on the atlas using
cogl_object_set_user_data so that it can be removed from the list when
the atlas is destroyed. The atlas textures themselves take a reference
to the atlas and this is the only thing that keeps the atlas
alive. This means that once the atlas becomes empty it will
automatically be destroyed.
All of the COGL_NOTEs pertaining to atlases are now prefixed with the
atlas pointer to make it clearer which atlas is changing.
All of the drawing needed in _cogl_add_path_to_stencil_buffer is done
with the vertex attribute API so there should be no need to flush the
enable flags to enable the vertex array. This was causing problems on
GLES2 where the vertex array isn't available.
The GLES2 wrapper is no longer needed because the shader generation is
done within the GLSL fragend and vertend and any functions that are
different for GLES2 are now guarded by #ifdefs.
Once the GLES2 wrapper is removed then we won't have the GLenums
needed for setting up the layer combine state. This adds Cogl enums
instead which have the same values as the corresponding GLenums. The
enums are:
CoglPipelineCombineFunc
CoglPipelineCombineSource
and
CoglPipelineCombineOp
Once the GLES2 wrapper is removed we won't be able to upload the
matrices with the fixed function API any more. The fixed function API
gives a global state for setting the matrix but if a custom shader
uniform is used for the matrices then the state is per
program. _cogl_matrix_stack_flush_to_gl is called in a few places and
it is assumed the current pipeline doesn't need to be flushed before
it is called. To allow these semantics to continue to work, on GLES2
the matrix flush now just stores a reference to the matrix stack in
the CoglContext. A pre_paint virtual is added to the progend which is
called whenever a pipeline is flushed, even if the same pipeline was
flushed already. This gives the GLSL progend a chance to upload the
matrices to the uniforms. The combined modelview/projection matrix is
only calculated if it is used. The generated programs end up never
using the modelview or projection matrix so it usually only has to
upload the combined matrix. When a matrix stack is flushed a reference
is taked to it by the pipeline progend and the age is stored so that
if the same state is used with the same program again then we don't
need to reupload the uniform.
Sometimes it would be useful if we could efficiently track when a matrix
stack has been modified. For example on GLES2 we have to upload the
modelview as a uniform to our glsl programs but because the modelview
state is part of the framebuffer state it becomes a bit more tricky to
know when to re-sync the value of the uniform with the framebuffer
state. This adds an "age" counter to CoglMatrixStack which is
incremented for any operation that effectively modifies the top of the
stack so now we can save the age of the stack inside the pipeline
whenever we update modelview uniform and later compare that with the
stack to determine if it has changed.
This returns the layer matrix given a pipeline and a layer index. The
API is kept as internal because it directly returns a pointer into the
layer private data to avoid a copy into an out-param. We might also
want to add a public function which does the copy.
When the GLES2 wrapper is removed we can't use the fixed function API
such as glColorPointer to set the builtin attributes. Instead the GLSL
progend now maintains a cache of attribute locations that are queried
with glGetAttribLocation. The code that previously maintained a cache
of the enabled texture coord arrays has been modified to also cache
the enabled vertex attributes under GLES2. The vertex attribute API is
now the only place that is using this cache so it has been moved into
cogl-vertex-attribute.c
Previously when stroking a path it was flushing a pipeline and then
directly calling glDrawArrays to draw the line strip from the path
nodes array. This patch changes it to build a CoglVertexArray and a
series of attributes to paint with instead. The vertex array and
attributes are attached to the CoglPath so it can be reused later. The
old vertex array for filling has been renamed to fill_vbo.
The code to display the source when the show-source debug option is
given has been moved to _cogl_shader_set_source_with_boilerplate so
that it will show both user shaders and generated shaders. It also
shows the code with the full boilerplate. To make it the same for
ARBfp, cogl_shader_compile_real now also dumps user ARBfp shaders.
The GLSL vertend is mostly only useful for GLES2. The fixed function
vertend is kept at higher priority than the GLSL vertend so it is
unlikely to be used in any other circumstances.
Due to Mesa bug 28585 calling glVertexAttrib with attrib location 0
doesn't appear to work. This patch just reorders the vertex and color
attributes in the shader in the hope that Mesa will assign the color
attribute to a different location.
Some builtin attributes such as the matrix uniforms and some varyings
were missing from the boilerplate for GLES2. This also moves the
texture matrix and texture coord attribute declarations to
cogl-shader.c so that they can be dynamically defined depending on the
number of texture coord arrays enabled.
The vertends are intended to flush state that would be represented in
a vertex program. Code to handle the layer matrix, lighting and
point size has now been moved from the common cogl-pipeline-opengl
backend to the fixed vertend.
'progend' is short for 'program backend'. The progend is intended to
operate on combined state from a fragment backend and a vertex
backend. The progend has an 'end' function which is run whenever the
pipeline is flushed and the two pipeline change notification
functions. All of the progends are run whenever the pipeline is
flushed instead of selecting a single one because it is possible that
multiple progends may be in use for example if the vertends and
fragends are different. The GLSL progend will take the shaders
generated by the fragend and vertend and link them into a single
program. The fragend code has been changed to only generate the shader
and not the program. The idea is that pipelines can share fragment
shader objects even if their vertex state is different. The authority
for the progend needs to be the combined authority on the vertend and
fragend state.
This adds two internal functions:
gboolean
_cogl_program_has_fragment_shader (CoglHandle handle);
gboolean
_cogl_program_has_vertex_shader (CoglHandle handle);
They just check whether any of the contained shaders are of that type.
The pipeline function _cogl_pipeline_find_codegen_authority has been
renamed to _cogl_pipeline_find_equivalent_parent and it now takes a
set of flags for the pipeline and layer state that affects the
authority. This is needed so that we can reuse the same code in the
vertend and progends.
Previously enabling and disabling textures was done whatever the
backend in cogl-pipeline-opengl. However enabling and disabling
texture targets only has any meaning if no fragment shaders are being
used so this patch moves the code to cogl-pipeline-fragend-fixed.
The GLES2 wrapper has also been changed to ignore enabledness when
deciding whether to update texture coordinate attribute pointers.
The current Cogl pipeline backends are entirely concerned with the
fragment processing state. We also want to eventually have separate
backends to generate shaders for the vertex processing state so we
need to rename the fragment backends. 'Fragend' is a somewhat weird
name but we wanted to avoid ending up with illegible symbols like
CoglPipelineFragmentBackendGlslPrivate.
We are currently using a pipeline as a key into our arbfp program cache
but because we weren't making a copy of the pipelines used as keys there
were times when doing a lookup in the cache would end up trying to
compare a lookup key with an entry key that would point to invalid
memory.
Note: the current approach isn't ideal from the pov that that key
pipeline may reference some arbitrarily large user textures will now be
kept alive indefinitely. The plan to improve on this is that we will
have a mechanism to create a special "key pipeline" which will derive
from the default Cogl pipeline (to avoid affecting the lifetime of
other pipelines) and only copy state from the original pipeline that
affects the arbfp program and will reference small dummy textures
instead of potentially large user textures.
In the arbfp backend there is a seqential approach to finding a suitable
arbfp program to use for a given pipeline; first we see if there's
already a program associated with the pipeline, 2nd we try and find a
program associated with the "arbfp-authority" 3rd we try and lookup a
program in a cache and finally we resort to starting code-generation for
a new program. This patch slightly reworks the code of these steps to
hopefully make them a bit clearer.
_cogl_pipeline_needs_blending_enabled tries to determine whether each
layer is using the default combine state. However it was using
argument 0 for both checks so the if-statement would never be true.
There are a set of "EvalFlags" that get passed to _cogl_pipeline_hash
that can tweak the semantics of what state is evaluated for hashing but
these flags weren't getting passed via the HashState state structure
so it would be undefined if you would get the correct semantics.
According to 9cc9033347 the windows headers #define near as nothing,
and presumable the same is true for 'far' too. Apparently this define is
to improve compatibility with code written for Windows 3.1, so it's good
that people will be able to incorporate such code into their Clutter
applications.
We were trying to declare and initializing an arbfp program cache for
GLES but since the prototypes for the _hash and _equal functions were
only available for GL this broke the GLES builds. By #ifdefing the code
to conditionally declare/initialize for GL only this should hopefully
fix GLES builds.
The constant 'True' is defined by Xlib which isn't used for all clutter
builds so this replaces occurrences of True with TRUE which is defined
by glib. This should hopefully fix the win32 builds.
This adds a cache (A GHashTable) of ARBfp programs and before ever
starting to code-generate a new program we will always first try and
find an existing program in the cache. This uses _cogl_pipeline_hash and
_cogl_pipeline_equal to hash and compare the keys for the cache.
There is a new COGL_DEBUG=disable-program-caches option that can disable
the cache for debugging purposes.
This allows us to get a hash for a set of state groups for a given
pipeline. This can be used for example to get a hash of the fragment
processing state of a pipeline so we can implement a cache for compiled
arbfp/glsl programs.
_cogl_pipeline_equal now accepts a mask of pipeline differences and layer
differences to constrain what state will be compared. In addition a set
of flags are passed that can tweak the comparison semantics for some
state groups. For example when comparing layer textures we sometimes
only need to compare the texture target and can ignore the data itself.
In updating the code this patch also changes it so all required pipeline
authorities are resolved in one step up-front instead of resolving the
authority for each state group in turn and repeatedly having to traverse
the pipeline's ancestry. This adds two new functions
_cogl_pipeline_resolve_authorities and
_cogl_pipeline_layer_resolve_authorities to handle resolving a set of
authorities.
This removes the unused array of per-packend priv data pointers
associated with every CoglPipelineLayer. This reduces the size of all
layer allocations and avoids having to zero an array for each
_cogl_pipeline_layer_copy.
A non-static function named cogl_object_get_type was inadvertently added
during the addition of the CoglObject base type, but there is no public
prototype in the headers and it's only referenced inside cogl-object.c
to implement cogl_handle_get_type() for compatibility. This removes the
function since we don't want to commit to CoglObject always simply being
a boxed type. In the future we may want to register hierarchical
GTypeInstance based types.
To allow us to have gobject properties that accept a CoglMatrix value we
need to register a GType. This adds a cogl_gtype_matrix_get_type function
that will register a static boxed type called "CoglMatrix".
This adds a new section to the reference manual for GType integration
functions.
As a pre-requisite for being able to register a boxed GType for
CoglMatrix (enabling us to define gobject properties that accept a
CoglMatrix) this adds cogl_matrix_copy and _free functions.
In _cogl_pipeline_needs_blending_enabled after first checking whether
the property most recently changed requires blending we would then
resort to checking all other properties too in case some other state
also requires blending. We now avoid checking all other properties in
the case that blending was previously disabled and checking the property
recently changed doesn't require blending.
Note: the plan is to improve this further by explicitly keeping track
of the properties that currently cause blending to be enabled so that we
never have to resort to checking all other properties we can constrain
the checks to those masked properties.
This moves _cogl_pipeline_get_parent and _cogl_pipeline_get_authority
into cogl-pipeline-private.h so they can be inlined since they have been
seen to get quite high in profiles. Given that they both contain such
small amounts of code the function call overhead is significant.
This adds a debug option called disable-software-clipping which causes
the journal to always log the clip stack state rather than trying to
manually clip rectangles.
Before flushing the journal there is now a separate iteration that
will try to determine if the matrix of the clip stack and the matrix
of the rectangle in each entry are on the same plane. If they are it
can completely avoid the clip stack and instead manually modify the
vertex and texture coordinates to implement the clip. The has the
advantage that it won't break up batching if a single clipped
rectangle is used in a scene.
The software clip is only used if there is no user program and no
texture matrices. There is a threshold to the size of the batch where
it is assumed that it is worth the cost to break up a batch and
program the GPU to do the clipping. Currently this is set to 8
although this figure is plucked out of thin air.
To check whether the two matrices are on the same plane it tries to
determine if one of the matrices is just a simple translation of the
other. In the process of this it also works out what the translation
would be. These values can be used to translate the clip rectangle
into the coordinate space of the rectangle to be logged. Then we can
do the clip directly in the rectangle's coordinate space.
Previously in cogl-clip-state.c when it detected that the current
modelview matrix is screen-aligned it would convert the clip entry to
a window clip. Instead of doing this cogl-clip-stack.c now contains
the detection and keeps the entry as a rectangle clip but marks that
it is entirely described by its scissor rect. When flusing the clip
stack it doesn't do anything extra for entries that have this mark
(because the clip will already been setup by the scissor). This is
needed so that we can still track the original rectangle coordinates
and modelview matrix to help detect when it would be faster to modify
the rectangle when adding it to the journal rather than having to
break up the batch to set the clip state.
When logging a quad we now only store the 2 vertices representing the
top left and bottom right of the quad. The color is only stored once
per entry. Once we come to upload the data we expand the 2 vertices
into four and copy the color to each vertex. We do this by mapping the
buffer and directly expanding into it. We have to copy the data before
we can render it anyway so it doesn't make much sense to expand the
vertices before uploading and this way should save some space in the
size of the journal. It also makes it slightly easier if we later want
to do pre-processing on the journal entries before uploading such as
doing software clipping.
The modelview matrix is now always copied to the journal entry whereas
before it would only be copied if we aren't doing software
transform. The journal entry struct always has the space for the
modelview matrix so hopefully it's only a small cost to copy the
matrix.
The transform for the four entries is now done using
cogl_matrix_transform_points which may be slightly faster than
transforming them each individually with a call to
cogl_matrix_transfom.
This reverts commit 4cfe90bde2.
GLSL 1.00 on GLES doesn't support unsized arrays so the whole idea
can't work.
Conflicts:
clutter/cogl/cogl/cogl-pipeline-glsl.c
The check for whether we can reuse a program we've already generated
was only being done if the pipeline already had a
glsl_program_state. When there is no glsl_program_state it then looks
for the nearest ancestor it can share the program with. It then
wasn't checking whether that ancestor already had a GL program so it
would start generating the source again. It wouldn't however compile
that source again because _cogl_pipeline_backend_glsl_end does check
whether there is already a program. This patch moves the check until
after it has found the glsl_program_state, whether or not it was found
from an ancestor or as its own state.
Under GLES2 we were defining the cogl_tex_coord_in varying as an array
with a size determined by the number of texture coordinate arrays
enabled whenever the program is used. This meant that we may have to
regenerate the shader with a different size if the shader is used with
more texture coord arrays later. However in OpenGL the equivalent
builtin varying gl_TexCoord is simply defined as:
varying vec4 gl_TexCoord[]; /* <-- no size */
GLSL is documented that if you declare an array with no size then you
can only access it with a constant index and the size of the array
will be determined by the highest index used. If you want to access it
with a non-constant expression you need to redeclare the array
yourself with a size.
We can replicate the same behaviour in our Cogl shaders by instead
declaring the cogl_tex_coord_in with no size. That way we don't have
to pass around the number of tex coord attributes enabled when we
flush a material. It also means that CoglShader can go back to
directly uploading the source string to GL when cogl_shader_source is
called so that we don't have to keep a copy of it around.
If the user wants to access cogl_tex_coord_in with a non-constant
index then they can simply redeclare the array themself. Hopefully
developers will expect to have to do this if they are accustomed to
the gl_TexCoord array.
When compiling for GLES2, the codegen is affected by state other than
the layers. That means when we find an authority for the codegen state
we can't directly look at authority->n_layers to determine the number
of layers because it isn't necessarily the layer state authority. This
patch changes it to use cogl_pipeline_get_n_layers instead. Once we
have two authorities that differ in codegen state we then compare all
of the layers to decide if they would affect codegen. However it was
ignoring the fact that the authorities might also differ by the other
codegen state. This path also adds an extra check for whether
_cogl_pipeline_compare_differences contains any codegen bits other
than COGL_PIPELINE_STATE_LAYERS.
When determining if a layer would require a different shader to be
generated it needs to check a certain set of state changes and it
needs to check whether the texture target is different. However it was
checking whether texture texture was different only if the other state
was also different which doesn't make any sense. It also only checked
the texture difference if that was the only state change which meant
that effectively the code was impossible to reach. Now it does the
texture target check indepent of the other state changes.
The fixed pipeline backend wasn't correctly flushing the combine
constant because it was using the wrong flag to determine if the
combine constant has changed since the last flushed material.
When enabling a unit that was disabled from a previous flush pipeline
it was forgetting to rebind the right texture unit so it wouldn't
work. This was causing the redhand to disappear when using the fixed
function backend in test-cogl-multitexture if anything else is added
to the scene.
For shader generation backends we don't need to worry about changes to
the texture object and changing the user matrix. The missing user
matrix flag was causing test-cogl-multitexture to regenerate the
shader every frame.
Having ctx here produces a warning on GLES. However it's needed for Big
GL as we have at the top of the file:
#ifdef HAVE_COGL_GL
#define glClientActiveTexture ctx->drv.pf_glClientActiveTexture
#endif
This reverts commit 27a3a2056a.
In 6246c2bd6 I moved the code to add the boilerplate to a shader to a
separate function and also made it so that the common boilerplate is
added as a separate string to glShaderSource. However I didn't notice
that the #define for the vertex and fragment shaders already includes
the common part so it was being added twice. Mesa seems to accept this
but it was causing problems on the IMG driver because COGL_VERSION was
defined twice.
Before commit 49898d43 CoglPipeline would compare whether a pipeline
layer's texture is equal by fetching the underlying GL handle. I
changed that so that it would only compare the CoglHandles because
that commit removes the GL handle texture overrides and sliced
textures instead log the underlying primitive texture. However I
forgot that the primitives don't always use
_cogl_texture_foreach_sub_texture_in_region when the quad fits within
the single texture so it won't use a texture override. This meant that
atlas textures and sub textures get logged with the atlas handle so
the comparison still needs to be done using the GL handles. It might
be nice to add a CoglTexture virtual to get the underlying primitive
texture instead to avoid having the pipeline poke around with GL
handles.
If we have to make override changes to the user's source material to
handle cogl_polygon then we need to make sure we unref the override
material at the end.
Previously we used the layers->backend_priv[] members to determine when
to notify backends about layer changes, but it entirely up to the
backends if they want to associate private state with layers, even
though they may still be interested in layer change notifications (they
may associate layer related state with the owner pipeline).
We now make the observation that in
_cogl_pipeline_backend_layer_change_notify we should be able to assume
there can only be one backend currently associated with the layer
because we wouldn't allow changes to a layer with multiple dependants.
This means we can determine the backend to notify by looking at the
owner pipeline instead.
The features_cached member of CoglContext is intended to mark when
we've calculated the features so that we know if they are ready in
cogl_get_features. However we always intialize the features while
creating the context so features_cached will never be FALSE so it's
not useful. We also had the odd behaviour that the COGL_DEBUG feature
overrides were only applied in the first call to
cogl_get_features. However there are other functions that use the
feature flags such as cogl_features_available that don't use this
function so in some cases the feature flags will be interpreted before
the overrides are applied. This patch makes it always initialize the
features and apply the overrides immediately while creating the
context. This fixes a problem with COGL_DEBUG=disable-arbfp where the
first material flushed is done before any call to cogl_get_features so
it may still use ARBfp.
Now that the GLSL backend can generate code it can effectively handle
any pipeline unless there is an ARBfp program. However with current
open source GL drivers the ARBfp compiler is more stable so it makes
sense to prefer ARBfp when possible. The GLSL backend is also lower
than the fixed function backend on the assumption that any driver that
supports GLSL will also support ARBfp so it's quicker to try the fixed
function backend next.
This adds COGL_DEBUG=disable-fixed to disable the fixed function
pipeline backend. This is needed to test the GLSL shader generation
because otherwise the fixed function backend would always override it.
We don't want to use gl_PointCoord to implement point sprites on big
GL because in that case we already use glTexEnv(GL_COORD_REPLACE) to
replace the texture coords with the point sprite coords. Although GL
also supports the gl_PointCoord variable, it requires GLSL 1.2 which
would mean we would have to declare the GLSL version and check for
it. We continue to use gl_PointCoord for GLES2 because it has no
glTexEnv function.
The GLES2 wrapper no longer needs to generate any fragment shader
state because the GLSL pipeline backend will always give the wrapper a
custom fragment shader. This simplifies a lot of the state comparison
done by the wrapper. The fog generation is also removed even though
it's actually part of the vertex shader because only the fixed
function pipeline backend actually calls the fog functions so it would
be disabled when using any of the other backends anyway. We can fix
this when the two shader backends also start generating vertex
shaders.
GLES2 has no glAlphaFunc function so we need to simulate the behaviour
in the fragment shader. The alpha test function is simulated with an
if-statement and a discard statement. The reference value is stored as
a uniform.
Previously the flag to mark the differences for the alpha test
function and reference value were conflated into one. However this is
awkward when generating shader code to simulate the alpha testing for
GLES 2 because in that case changing the function would need a
different program but changing the reference value just requires
updating a uniform. This patch makes the function and reference have
their own state flags.
The GLSL shader generation supports layer combine constants so there's
no need to disable it for GLES2. It looks like there was also code for
it in the GLES2 wrapper so I'm not sure why it was disabled in the
first place.
The GLSL pipeline backend can now generate code to represent the
pipeline state in a similar way to the ARBfp backend. Most of the code
for this is taken from the GLES 2 wrapper.
_cogl_shader_compile_real had some code to create a set of strings to
combine the boilerplate code with a shader before calling
glShaderSource. This has now been moved to its own internal function
so that it could be used from the GLSL pipeline backend as well.
need_texture_combine_separate is moved to cogl-pipeline.c and renamed
to _cogl_pipeline_need_texture_combine_separate. The function is
needed by both the ARBfp and GLSL codegen backends so it makes sense to
share it.
The code for finding the arbfp authority for a pipeline should be the
same as finding the GLSL authority. So that the code can be shared the
function has been moved to cogl-pipeline.c and renamed to
_cogl_pipeline_find_codegen_authority.
Only one of the material backends can be generating code at the same
time so it seems to make sense to share the same source buffer between
arbfp and glsl. The new name is fragment_source_buffer in case we
later want to create a new buffer for the vertex shader. That probably
couldn't share the same buffer because it will likely need to be
generated at the same time.
* cogl_texture_get_data() is converted to use
_cogl_texture_foreach_sub_texture_in_region() to iterate
through the underlying textures.
* When we need to read only a portion of the underlying
texture, we set up a FBO and use _cogl_read_pixels()
to read the portion we need. This is enormously more
efficient for reading a small portion of a large atlas
texture.
* The CoglAtlasTexture, CoglSubTexture, and CoglTexture2dSliced
implementation of get_texture() are removed.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2414
Previously in cogl_read_pixels we assume the format of the framebuffer
is always premultiplied because that is the most likely format with
the default Cogl blend mode. However when the framebuffer is bound to
a texture we should be able to make a better guess at the format
because we know the texture keeps track of the premult status. This
patch adds an internal format member to CoglFramebuffer. For onscreen
framebuffers we still assume it is RGBA_8888_PRE but for offscreen to
textures we copy the texture format. cogl_read_pixels uses this to
determine whether the data returned by glReadPixels will be
premultiplied.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2414
When converting the data in cogl_read_pixels it was using bmp_format
instead of the format passed in to the function. bmp_format is the
same as the passed in format except that it always has the premult bit
set. Therefore the conversion would not handle premultiply correctly.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2414
This is the same as _cogl_read_pixels except that it takes a rowstride
parameter for the destination buffer. Under OpenGL setting the
rowstride this will end up calling GL_ROW_LENGTH so that the buffer
region can be directly written to. Under GLES GL_ROW_LENGTH is not
supported so it will use an intermediate buffer as it does if the
format is not GL_RGBA.
cogl_read_pixels now just calls the full version of the function with
the rowstride set to width*bpp.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2414
This function is the same as cogl_offscreen_new_to_texture but it
takes a level parameter and a set of flags so that FBOs can be used to
render to higher mipmap levels and to disable the depth and stencil
buffers. cogl_offscreen_new_to_texture now just calls the new function
with the level set to zero. This function could be useful in a few
places in Cogl where we want to use FBOs as an implementation detail
such as when copying between textures.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2414
When uploading a 3D texture with an awkward rowstride, on GLES Cogl
will copy the images to an intermediate buffer to pass to GL. However
it was using the wrong height when copying the data so it would end up
overflowing the buffer and crashing.
Since we're using CoglPipelineWrapModeInternal in the internal API
anyway, and the compiler complains loudly when comparing two enumeration
types without casting, the PipelineLayer struct should store the
wrap modes using the internal enumeration.
When using clip planes and we we have to project some vertices into
screen coordinates we used to transform those by the modelview and then
the projection matrix separately. Now we combine the modelview and
projection matrix and then use that to transform the vertices in one
step instead.
When logging quads in the journal it used to be possible to specify a
mask of fallback layers (layers where a default white texture should be
used in-place of the corresponding texture in the current source
pipeline). Since we now handle fallbacks for cogl_rectangle* primitives
when validating the pipeline up-front before logging in the journal we
no longer need the ability for the journal to apply fallbacks too.
This add two new function that allows us to transform or project an
array of points instead of only transforming one point at a time. Recent
benchmarking has shown cogl_matrix_transform_point to be a bottleneck
sometimes, so this should allow us to reduce the overhead when
transforming lots of vertices at the same time, and also reduce the cost
of 3 component, non-projective transforms.
For now they are marked as experimental (you have to define
COGL_ENABLE_EXPERIMENTAL_API) because there is some concern that it
introduces some inconsistent naming. cogl_matrix_transform_point would
have to be renamed cogl_matrix_project_point to be consistent, but that
would be an API break.
Switch _cogl_rectangles_with_multitexture_coords to using
_cogl_pipeline_foreach_layer to iterate the layers of a pipeline when
validating instead of iterating the pipelines internal list, which is
risky since any modifications to pipelines (even to an override pipeline
derived from the original), could potentially corrupt the list as it is
being iterated.
This removes the possibility to specify wrap mode overrides within a
CoglPipelineFlushOptions struct since the right way to handle these
overrides is by copying the user's material and making the changes to
that copy before flushing. All primitives code has already switched away
from using these wrap mode overrides so this patch just removes unused
code and types. It also remove the wrap_mode_overrides argument for
_cogl_journal_log_quad.
With the refactoring to centralize code into CoglBuffer,
_cogl_buffer_fini() was never actually implemented, so all GL
vertex and index buffer objects were leaked.
The duplicate call to glDeleteBuffers() in CoglPixelArray is
removed (it wasn't paying attention to whether the buffer had been
allocated as a PBO or not.)
http://bugzilla.clutter-project.org/show_bug.cgi?id=2423
This adds a COGL_DEBUG=wireframe option to visualize the underlying
geometry of the primitives being drawn via Cogl. This works for triangle
list, triangle fan, triangle strip and quad (internal only) primitives.
It also works for indexed vertex arrays.
In cogl_vertex_buffer_indices_get_for_quads() we sometimes have to
extend the length of an existing array, but when we came to unref the
previous array we didn't first check that it wasn't simply NULL.
This adds an optional data argument for cogl_vertex_array_new() since it
seems that mostly every case where we use this API we follow up with a
cogl_buffer_set_data() matching the size of the new array. This
simplifies all those cases and whenever we want to delay uploading of
data then NULL can simply be passed.
There's no longer any need to use the GL handle in the callback for
_cogl_texture_foreach_sub_texture_in_region because it can now work in
terms of primitive cogl textures so it has now been removed. This
would be helpful if we ever want to make the foreach function public
so that apps could implement their own primitives using sliced
textures.
Since d5634e37 the sliced texture backend now works in terms of
CoglTexture2Ds so there's no need to have special casing for
overriding the texture of a pipeline layer with a GL handle. Instead
we can just use cogl_pipeline_set_layer_texture with the
CoglHandle. The special _cogl_pipeline_set_layer_gl_texture_slice
function has now been removed and parts of the code for comparing
materials have been simplified.
The cogl_texture_foreach_sub_texture_in_region virtual for the sliced
texture backend was previously passing the CoglHandle of the sliced
texture to the callback. Since d5634e37 the slice texture backend now
works in terms of 2D textures so it's possible to pass the underlying
slice texture as a handle too. This makes all of the foreach callbacks
consistent in that they pass a CoglHandle of the primitive texture
type that matches the GL handle.
When COGL_ENABLE_EXPERIMENTAL_2_0_API is defined cogl.h will now include
cogl2-path.h which changes cogl_path_new() so it can directly return a
CoglPath pointer; it no longer exposes a prototype for
cogl_{get,set}_path and all the remaining cogl_path_ functions now take
an explicit path as their first argument.
The idea is that we want to encourage developers to retain path objects
for as long as possible so they can take advantage of us uploading the
path geometry to the GPU. Currently although it is possible to start a
new path and query the current path, it is not convenient.
The other thing is that we want to get Cogl to the point where nothing
depends on a global, current context variable. This will allow us to one
day define a sensible threading model if/when that is ever desired.
For now this new define is simply an alias for
COGL_ENABLE_EXPERIMENTAL_API but the intention is that we will also use
it to start experimenting with changes that need to break the existing
Cogl API in incompatible ways.
We now prepend a set of defines to any given GLSL shader so that we can
define builtin uniforms/attributes within the "cogl" namespace that we
can use to provide compatibility across a range of the earlier versions
of GLSL.
This updates test-cogl-shader-glsl.c and test-shader.c so they no longer
needs to special case GLES vs GL when splicing together its shaders as
well as the blur, colorize and desaturate effects.
To get a feel for the new, portable uniform/attribute names here are the
defines for OpenGL vertex shaders:
#define cogl_position_in gl_Vertex
#define cogl_color_in gl_Color
#define cogl_tex_coord_in gl_MultiTexCoord0
#define cogl_tex_coord0_in gl_MultiTexCoord0
#define cogl_tex_coord1_in gl_MultiTexCoord1
#define cogl_tex_coord2_in gl_MultiTexCoord2
#define cogl_tex_coord3_in gl_MultiTexCoord3
#define cogl_tex_coord4_in gl_MultiTexCoord4
#define cogl_tex_coord5_in gl_MultiTexCoord5
#define cogl_tex_coord6_in gl_MultiTexCoord6
#define cogl_tex_coord7_in gl_MultiTexCoord7
#define cogl_normal_in gl_Normal
#define cogl_position_out gl_Position
#define cogl_point_size_out gl_PointSize
#define cogl_color_out gl_FrontColor
#define cogl_tex_coord_out gl_TexCoord
#define cogl_modelview_matrix gl_ModelViewMatrix
#define cogl_modelview_projection_matrix gl_ModelViewProjectionMatrix
#define cogl_projection_matrix gl_ProjectionMatrix
#define cogl_texture_matrix gl_TextureMatrix
And for fragment shaders we have:
#define cogl_color_in gl_Color
#define cogl_tex_coord_in gl_TexCoord
#define cogl_color_out gl_FragColor
#define cogl_depth_out gl_FragDepth
#define cogl_front_facing gl_FrontFacing
When converting the virtual coordinates of the underlying texture for
a slice to virtual coordinates for the whole texture it was using the
size and offset of the intersection as the size of the child
texture. This would be incorrect if the texture contains waste or the
texture coordinates are not the default. Instead the sliced foreach
function now passes the CoglSpan to the callback instead of the
intersection.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2398
Previously in the tests/tools directory we build a disable-npots
library which was used as an LD_PRELOAD to trick Cogl in to thinking
there is no NPOT texture extension. This is a little awkward to use so
it seems much simpler to just define a COGL_DEBUG option to disable
npot textures.
In some micro-benchmarks testing journal throughput the list
manipulation jumps pretty high in the profile. This replaces the GSList
usage with a GArray instead which is effectively a grow only allocation
that means we avoid ongoing allocations while manipulating the stack
mid-scene.
During _cogl_pipeline_needs_blending_enabled we were always checking the
current lighting properties (ambient,diffuse,specular,emission) which
had a notable impact during micro-benchmarks that exercise journal
throughput of simple colored rectangles. This #if 0's the offending code
considering that Cogl doesn't actually support lighting currently and
when it actually does then we will be able to optimize this by avoiding
the checks when lighting is disabled.
When using cogl_set_source_color4ub there is a notable difference
between colors that require blending and those that dont. When trying to
modify the color of pipeline referenced by the journal we don't force a
flush of the journal unless the color change will also change the
blending state. By using two separate pipeline objects for handing
opaque or transparent colors we can avoid ever flushing the journal when
repeatedly using cogl_set_source_color and jumping between opaque and
transparent colors.
This reworks _cogl_texture_quad_multiple_primitives so instead of using
the CoglPipelineWrapModeOverrides mechanism to force the clamp to edge
repeat mode we now derive an override pipeline using cogl_pipeline_copy
instead. This avoids a relatively large, unconditional, memset.
This avoids using the wrap mode overrides mechanism to implement
_cogl_multitexture_quad_single_primitive which requires memsetting a
fairly large array. This updates it to use cogl_pipeline_foreach_layer()
and we now derive an override_material to handle changes to the wrap
modes instead of using the CoglPipelineWrapModeOverrides.
Previously there was a check to avoid filling the path if there are
zero nodes. However the tesselator also won't generate any triangles
if there are less than 3 nodes so we might as well bail out in that
case too. If we don't emit any triangles then we would end up trying
to create an empty VBO. Although I don't think this should necessarily
be a problem, this seems to cause Mesa to segfault in version 7.8.1
when calling glBufferSubData (although not in
master). test-cogl-primitives tries to fill a path with only two
points so it's convenient to be able to avoid the crash in this case.
When adding a new entry to the journal a reference is now taken on the
current clip stack. Modifying the current clip state no longer causes
a journal flush. The journal flushing code now has an extra stage to
compare the clip state of each entry. The comparison can simply be
done by comparing the pointers. Although different clip states will
still end up with multiple draw calls this at leasts allows a scene
comprising of multiple different clips to be upload with one vbo. It
also lays the groundwork to do certain tricks when drawing clipped
rectangles such as modifying the geometry instead of setting a clip
state.
This adds a flag to avoid flushing the clip state when flushing the
framebuffer state. This will be used by the journal to manage its own
clip state flushing.
Flushing the clip state no longer does anything that would cause the
journal to flush. The clip state is only flushed when flushing the
framebuffer state and in all cases this ends up flushing the journal
in one way or another anyway. Avoiding flushing the journal will make
it easier to log the clip state in the journal.
Previously when trying to set up a rectangle clip that can't be
scissored or when using a path clip the code would use cogl_rectangle
as part of the process to fill the stencil buffer. This is now changed
to use a new internal _cogl_rectangle_immediate function which
directly uses the vertex array API to draw a triangle strip without
affecting the journal. This should be just as efficient as the
previous journalled code because these places would end up flushing
the journal immediately before and after submitting the single
rectangle anyway and flushing the journal always creates a new vbo so
it would effectively do the same thing.
Similarly there is also a new internal _cogl_clear function that does
not flush the journal.
Previously we tracked whether the clip stack needs flushing as part of
the CoglClipState which is part of the CoglFramebuffer state. This is
a bit odd because most of the clipping state (such as the clip planes
and the scissor) are part of the GL context's state rather than the
framebuffer. We were marking the clip state on the framebuffer dirty
every time we change the framebuffer anyway so it seems to make more
sense to have the dirtiness be part of the global context.
Instead of a just a single boolean to record whether the state needs
flushing, the CoglContext now holds a reference to the clip stack that
was flushed. That way we can flush arbitrary stack states and if it
happens to be the same as the state already flushed then Cogl will do
nothing. This will be useful if we log the clip stack in the journal
because then we will need to flush unrelated clip stack states for
each batch.
Instead of having a separate CoglHandle for CoglClipStack the code is
now expected to directly hold a pointer to the top entry on the
stack. The empty stack is then the NULL pointer. This saves an
allocation when we want to copy the stack because we can just take a
reference on a stack entry. The idea is that this will make it
possible to store the clip stack in the journal without any extra
allocations.
The _cogl_get_clip_stack and set functions now take a CoglClipStack
pointer instead of a handle so it would no longer make sense to make
them public. However I think the only reason we would have wanted that
in the first place would be to save the clip state between switching
FBOs and that is no longer necessary.
CoglVertexAttribute has an internal draw function that is used by the
CoglJournal to avoid the call to cogl_journal_flush which would
otherwise end up recursively flushing the journal forever. The
enable_gl_state function called by this was previously also calling
_cogl_flush_framebuffer_state. However the journal code tries to
handle this function specially by calling it with a flag to disable
flushing the modelview matrix. This is useful because the journal
handles flushing the modelview itself. Without this patch the journal
state ends up getting flushed twice. This isn't a particularly big
problem currently because the matrix stack has caching to recognise
when it would push the same state twice and bails out. However if we
later want to use the framebuffer flush flags to override a particular
state of the framebuffer (such as the clip state) then we need to make
sure the flush isn't called twice.
Unless the CoglBuffer is being used for texture data then it's
relatively unlikely that the data will contain an array of bytes. For
example if it's used as a vertex array then it's more likely to be
floats or some vertex struct. In that case it's much more convenient
if set_data and map use void* pointers so that we can avoid a cast.
The convenience constructors for the builtin vertex structs were
creating the primitive and then immediately destroying it and
returning the pointer. I think the intention was to unref the
attributes instead. This adds an internal wrapper around the
new_with_attributes_array constructor which unrefs the attributes
instead of the primitive. The convenience constructors now use that.
The GLES2 wrapper was referring to COGL_MATERIAL_PROGRAM_TYPE_GLSL but
this has since been renamed to COGL_PIPELINE_PROGRAM_TYPE_GLSL so the
GLES2 backend wouldn't compile.
