This updates _clutter_paint_volume_get_stage_paint_box to try and
calculate more stable paint-box sizes for fixed sized paint-volumes by
not basing the size on the volume's sub-pixel position.
So the aim is that for a given rectangle defined with floating point
coordinates we want to determine a stable quantized size in pixels that
doesn't vary due to the original box's sub-pixel position.
The reason this is important is because effects will use this API to
determine the size of offscreen framebuffers and so for a fixed-size
object that may be animated across the screen we want to make sure that
the stage paint-box has an equally stable size so that effects aren't
made to continuously re-allocate a corresponding fbo.
The other thing we consider is that the calculation of this box is
subject to floating point precision issues that might be slightly
different to the precision issues involved with actually painting the
actor, which might result in painting slightly leaking outside the
user's calculated paint-volume. This patch now adds padding to consider
this too.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Instead of relying on C to round the floating point allocation to
integers by flooring the values we now use CLUTTER_NEARBYINT to round
the allocation's position and size to the nearest integers instead. Using
floor leads to rather unstable rounding for the width and height when
there may be tiny fluctuations in the floating point width/height.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This is a replacement for the nearbyint function which always rounds to
the nearest integer. nearbyint is a C99 function so it might not always
be available but also it seems in glibc it is defined as a function call
so this macro could end up faster anyway. We can't just add 0.5 because
it will break for negative numbers.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The implementation of _clutter_actor_set_default_paint_volume which
simply uses the actor's allocation to determine a paint-volume was
needlessly using the allocation rounded to integers by internally using
clutter_actor_get_allocation_geometry instead of
clutter_actor_get_allocation_box. This was introducing a lot of
instability into the paint-volume due to the way rounding was done.
The code has now been updated to use clutter_actor_get_allocation_box
so we are dealing with the floating point allocation instead.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If we're building on/for Windows, set 'win32' as the default flavour; if
we're building on OS X, set 'osx' as the default flavour. For everything
else, use 'glx'.
This adds a public function to get the bounds of the current clipped
redraw on a stage. This should only be called while the stage is being
painted. The function diverts to a virtual function on the
ClutterStageWindow implementation. If the function isn't implemented
or it returns FALSE then the entire stage is reported. The clip bounds
are in integer pixel coordinates in the stage's coordinate space.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2421
Cogl recently renamed symbols with the form
cogl_onscreen_<platform>_blah to be consistent with other platform
specific APIs so they are now named like cogl_<platform>_onscreen_blah.
This makes the corresponding change to clutter.
Cogl changed has changed the name of cogl_context_egl_get_egl_context to
cogl_egl_context_get_egl_context to be consistent with other platform
specific symbols.
The class is of dubious utility, now that we have a complex animation
API in ClutterAnimator and ClutterState, as opposed to a simple one
in ClutterBehaviour. The Score API also suffers from some naïve design
issues that made it far less useful than intended.
Commit 0ede622f51 inadvertently made it so that shaders are applied
during picking. This was making test-shader fail to respond to clicks.
The commit also makes it so that culling is applied during
picking. Presumably this is also unintentional because the commit
message does not mention it. However I think it may make sense to do
culling during picking so it might as well stay that way.
https://bugzilla.gnome.org/show_bug.cgi?id=653959
The cursor's on-screen rectangle is defined in terms of the text
length, the current index, and text_x and text_y, which hold the text
offset in overflowing text fields.
When deleting large amounts of text, text_x is set to 0. In some
edge case branch paths, the cursor rectangle could be calculated
after the current index and text length were updated, but before
the text_x offset could be. This left a negative x position, which
consequently blew up Cogl and the widget.
https://bugzilla.gnome.org/show_bug.cgi?id=651079
It was already the intention that the ClutterGLXTexturePixmap API should
be built and made available on any X11 based platforms since there was
nothing specific about the API and it is useful to have for
compatibility. There was a mistake in the Makefile.am though which meant
only the header was getting installed but the code wasn't being built.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Since the implementation of ClutterGLXTexturePixmap has nothing GLX
specific about it (it is simply layered on top of
ClutterX11TexturePixmap) we don't need to include glx.h. Removing this
include also means that the code can be built for compatibility against
GLES drivers.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This removes the is_axis_aligned assertions for the width/height/depth
getters and setters, since for example it is legitimate to query the
width, height or depth of a container's child actors which aren't
necessarily axis aligned.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
cogl_renderer_xlib_set_foreign_display was renamed to
cogl_xlib_renderer_set_foriegn_display so this is the corresponding
change to clutter.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The generic cogl_renderer_handle_native_event API was removed from the
Cogl public API in favour of typesafe functions, so this updates the
win32 backend in line with that change.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
It is possible, by calling clutter_set_motion_events_enabled() prior to
the creation of any stage, to control the per-actor motion event
delivery flag on each newly created stage. Since we deprecated the
global accessor functions in favour of the per-Stage ones, we need to
remove the call to clutter_get_motion_events_enabled() inside the
ClutterStage instance initialization, and replace it with an internal
function.
This code will go away when we can finally break API and remove the
deprecated functions.
Complete the quest of commit bc548dc862
by making the ClutterStage methods for controlling the per-actor motion
and crossing event delivery public, and deprecating the global ones.
Although this patch doesn't make them public, it documents the
_clutter_actor_get/apply_relative_transform_matrix functions so they
could easily be made public if desired. I think these API could be
useful to have publicly, and I originally documented them because I
thought they would be needed in the MX toolkit.
Previously ClutterActor was using priv->propagated_one_redraw to
determine whether to pass CLUTTER_EFFECT_PAINT_ACTOR_DIRTY to the
paint method of the effect. This isn't a good idea because the
propagated_one_redraw flag is cleared whenever clutter_actor_paint is
called, even if the actor isn't actually painted because of the zero
opacity shortcut. Instead of this, ClutterActor now has a separate
flag called is_dirty that gets set whenever queue_redraw_full is
called or whenever the queue redraw signal is bubbled up from a child
actor. The flag is only cleared in clutter_actor_paint if the effects
are actually run. Therefore it will stay set even if the opacity is
zero or if the parent actor decides not to paint the child.
Previously there were two places set propagated_one_redraw to FALSE -
once if the opacity is zero and once just before we emit the paint
signal. Now that propagated_one_redraw is only used to determine
whether to pass on the queue redraw signal it seems to make sense to
just clear it in one place right at the start of clutter_actor_paint.
https://bugzilla.gnome.org/show_bug.cgi?id=651784
On reviewing the clutter-actor.c code using
_apply_modelview_transform_recursive I noticed various comments stating
that it will never call the stage's ->apply_transform vfunc to transform
into eye coordinates, but actually looking at the implementation that's
not true. The comments probably got out of sync with an earlier
implementation that had that constraint. This removes the miss-leading
comments and also updates various uses of the api where we were manually
applying the stage->apply_transform.
Instead of using the cogl_vertex_buffer API this uses the more concise
cogl_primitive API instead. The aim is to get rid of the
cogl_vertex_buffer API eventually so we should be trying out the
replacement API wherever possible.
When using CLUTTER_PAINT=paint-volumes to visualize the paint-volumes of
actors we were already disabling clipped-redraws because we are drawing
extra geometry that the actors don't know about but we didn't disable
culling. This was resulting in actors disappearing while using this
debug option.
This makes sure we don't try and draw paint-volumes or culling results
during a pick cycle since that results in us reading back invalid ids
from the pick-buffer.
This adds CLUTTER_PAINT=disable-offscreen-redirect to help diagnose
problems with the correct opacity changes. This just makes it so that
it never installs the flatten effect so it will never automatically
redirect an actor offscreen.
This removes the pv->is_xis_aligned assertion in
_clutter_paint_volume_union. We were already considering the case where
the second volume may not be axis aligned and aligning it into a
temporary variable in that case, but we now also consider that the first
pv may also not be aligned.
The removes the pv->is_complete assertion from
_clutter_paint_volume_axis_align() and instead if the volume isn't
complete it calls _clutter_paint_volume_complete().
When calculating the union of a volume with an empty volume we aim to
simply take the contents of the non-empty volume, but we were not
copying the flags across. We now use
_clutter_paint_volume_set_from_volume which copies all the flags except
the is_static flag.
In _clutter_paint_volume_set_from_volume we were using memcpy to simply
copy everything from one volume to another, but that meant we were
trashing the is_static flag which determines if the destination
paint-volume was slice allocated or not.
This removes the constraint that a paint-volume must be axis aligned
before _clutter_paint_volume_complete can be called. NB: A paint volume
is represented by one origin vertex and then three axis vertices to
define the width, height and depth of the volume. It's straightforward
to use the vectors from the origin to the axis vertices to deduce the
other 4 vertices so we can remove the is_axis_aligned assertion.
Since eef9078f the translation of the camera away from the z=zero
plane was hardcoded at 50 which is approximately half way between the
default z_near and z_far values. This ended up with quite a small
distance in user-space coordinates to the far plane with the default
stage size and this was causing test-texture-quality to clip the actor
early.
This patch makes it try to calculate a reasonable value for the
position of the z=0 plane as well as a value for z_far so we maximize
the space in between the z=0 plane and the near plane and we have a
predictable amount of space behind the stage before hitting the far
clipping plane, while considering the trade off of loosing depth
precision by pushing the far plane too far back relative to the near
plane.
With the default fov of 60° it's not possible to use the stage size to
define the gap in-front of the stage plane; only ~87% of the stage size
is possible as an upper limit. We make 85% of the stage_height available
assuming you have a fov of 60°. We consistently provide 10 times the
stage height of space behind the stage regardless of the fov.
It seems worth noting here that we went around in circles a few times
over how to calculate the gaps since there are a number of trade offs to
consider and they also affect the complexity of the solution. In the end
we went for simplicity but commented the issues well enough hopefully so
we can develop a more elaborate solution if we ever have a use-case.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2625
Since eef9078f ClutterStage updates the aspect ratio of the
perspective matrix whenever the size of the stage changes. This meant
that if an application tries to set its own perspective matrix then
part of it would get overridden. It's not really clear what the
use-case of setting the perspective on the stage should be but it
seems like the safest bet is to always try to preserve the
application's request. The documentation for the function has been
tweaked to discourage its use.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2625
Some parts of the StageWindow interface aren't meaningful for all window
systems. This makes stage_window_set_title/fullscreen/cursor_visible
optional instead of requiring those window systems to implement empty
stubs. Notably the empty stubs we had in the Cogl backend (previously
the EGL backend) used g_warning to report the feature as unsupported and
that was causing conformance test failures.
Since GLX and EGL are abstracted by Cogl the two backends are both
implementing everything using the Cogl API and they are almost
identical.
This updates the egl backend to support everything that the glx backend
supports. Now that EGL and GLX are abstracted by Cogl, the plan is that
we will squash the clutter-egl/glx backends into one. Since the EGL
backend in clutter can conditionally not depend on X11 we will use the
EGL backend as the starting point of our common backend.
https://bugzilla.gnome.org/show_bug.cgi?id=649826
We hadn't updated the egl backend inline with a change to the arguments
that cogl_onscreen_x11_set_foreign_window_xid would expect and that was
causing a compilation error.
* swipe-action:
test-swipe-action: Clean up the test code
docs: Add the new actions to the API reference
gesture-action: Remove the multi-device entry points
swipe-action: Remove the required devices call
swipe-action: Clean up
gesture-action: Clean up
Add ClutterSwipeAction and ClutterGestureAction
Do not just allow animating states connected to signals: add a "warp"
optional key that ends up calling clutter_state_warp_to_state(). This
is useful for debugging.
Currently, defining states for object signals can only be done by
defining a ClutterState inside the ClutterScript definition. We should
allow creating a (named) ClutterState in code, and associating it to a
ClutterScript instance — and have the Script resolve the "state" field
of a signal definition correctly.
One of the uses of a ClutterState state machine along with ClutterScript
is to provide a quick way to transition from state to state in response
to signal emitted on specific instances.
Connecting a real function, in code, to a specific signal does not
improve the ease of use of ClutterScript to define scenes.
By adding a new signal definition to the current one we can have both a
simple way to define application logic in code and in the UI definition
file.
The new syntax is trivial:
{
"name" : <signal name>,
"state" : <state machine script id>,
"target-state" : <target state>
}
The ClutterState instance is identified by its script id, and the target
state is resolved at run-time, so it can be defined both in
ClutterScript or in code. Ideally, we should find a way to associate a
default ClutterState instance to the ClutterScript one that parses the
definition; this way we would be able to remove the "state" member, or
even "style" the behaviour of an object by replacing the ClutterState
instance.
The implementation uses a signal emission hook, to avoid knowing the
signal signature; we check the emitter of the signal against the object
that defined the signal, to avoid erroneous state changes.
