The function will be used in copying from a primary GPU framebuffer to a
secondary GPU framebuffer using the primary GPU specifically when the
secondary GPU is not render-capable.
To allow falling back in case glBlitFramebuffer cannot be used, add boolean
return value, and GError argument for debugging purposes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
Depends on "cogl: Replace ANGLE with GLES3 and NV framebuffer_blit"
Allow blitting between onscreen and offscreen framebuffers by doing the y-flip
as necessary. This was not possible with ANGLE, but now with ANGLE gone,
glBlitFramebuffer supports flipping the copied image.
This will be useful in follow-up work to copy from onscreen primary GPU
framebuffer to an offscreen secondary GPU framebuffer.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
Depends on: "cogl: Replace ANGLE with GLES3 and NV framebuffer_blit"
As a possible ANGLE implementation is not longer limiting the pixel format
matching, lift the requirement of having the same pixel format.
We still cannot do a premult <-> non-premult conversion during a blit, so guard
against that.
This will be useful in follow-up work to copy from onscreen primary GPU
framebuffer to an offscreen secondary GPU framebuffer if the formats do not
match exactly.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
ANGLE extensions are only provided by Google's Almost Native Graphics Layer
Engine (ANGLE) implementation. Therefore they do not seem too useful for
Mutter.
The reason to drop GL_ANGLE_framebuffer_blit support is that it has more
limitations compared to the glBlitFramebuffer in GL_EXT_framebuffer_blit,
GL_NV_framebuffer_bit, OpenGL 3.0 and OpenGL ES 3.0. Most importantly, the
ANGLE version cannot flip the image while copying, which limits
_cogl_blit_framebuffer to only off-screen <-> off-screen copies. Follow-up work
will need off-screen <-> on-screen copies.
Instead of adding yet more capability flags to Cogl, dropping ANGLE support
seems appropriate.
The NV extension is added to the list of glBlitFramebuffer providers because it
provides the same support as ANGLE and more.
Likewise OpenGL ES 3.0 is added to the list of glBlitFramebuffer providers
because e.g. Mesa GLES implementation usually provides it and that makes it
widely available, again surpassing the ANGLE supported features.
Follow-up patches will lift some of the Cogl assumptions of what
glBlitFramebuffer cannot do.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
Public functions in C should be declared before they are defined, and
often compilers warn you if you haven't:
```
../cogl/cogl/cogl-trace.c:237:1: warning: no previous prototype for
‘cogl_set_tracing_enabled_on_thread_with_fd’ [-Wmissing-prototypes]
cogl_set_tracing_enabled_on_thread_with_fd (void *data,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../cogl/cogl/cogl-trace.c:245:1: warning: no previous prototype for
‘cogl_set_tracing_enabled_on_thread’ [-Wmissing-prototypes]
cogl_set_tracing_enabled_on_thread (void *data,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../cogl/cogl/cogl-trace.c:253:1: warning: no previous prototype for
‘cogl_set_tracing_disabled_on_thread’ [-Wmissing-prototypes]
cogl_set_tracing_disabled_on_thread (void *data)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
In this case the function declarations were not included because
`HAVE_TRACING` isn't defined. But we should still include `cogl-trace.h`
because it handles the case of `HAVE_TRACING` not being defined and
correctly still declares the functions defined in `cogl-trace.c`.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/650
`cogl_util_memmem` was used as a wrapper in case `memmem` wasn't
defined, but since commit 46942c24 these are required. In case of
`memmem`, we didn't explicitly require this in the meson build files, so
add that as well.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/629
These are implemented in the Meta namespace these days, where we have
better abstractions for wayland-related types. They also weren't used
anymore, since we removed the unused ClutterWaylandSurface type in the
previous commit.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/624
The idea here is to be able to visualize and immediately
understand what is happening. Something like:
```
[ view1 ] [ view2 ]
[---- Layout ---][------ Paint ------][ Pick ]
[================== Update =====================]
```
But with colors. A few of the previous profiling data
sections were removed, since they didn't really add to
reading the graph.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/197
Add the ability to add tracing instrumentation to the code. When
enabled, trace entries will generate a file with timing information
that will be processable by sysprof for generating visualization of
traces over time.
While enabled by default at compile time, it is possible to disable the
expansion of the macros completely by passing --disable-tracing to
./configure.
Tracing is so far only actually done if actually enabled on explicitly
specified threads.
This will be used by Mutter passing the write end of a pipe, where the
read end is sent to Sysprof itself via the D-Bus method 'Capture()'.
By passing that, we have to detect EPIPE that is sent when Sysprof stops
recording. Fortunately, we already ignore the signal at meta_init(), so
no need to add a custom signal handler.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/197
Add debug flags based on meson's `debug` option instead of `buildtype`.
This allows custom build configurations to behave like a debug or release build.
Add `-fno-omit-frame-pointer` to Mutter/Cogl. Not to Clutter though, as that would
require more changes to how Clutter's gir is created
Remove `-DG_DISABLE_CAST_CHECKS` from Clutter in debug builds
Add `-DG_DISABLE_CHECKS`, `-DG_DISABLE_ASSERT` and `-DG_DISABLE_CAST_CHECKS` to all
non-debug builds but `plain`, which explicitly should not have any compile flags
Use `cc.get_supported_arguments`, so it becomes more obvious to the user which flags
are set during compilation
https://gitlab.gnome.org/GNOME/mutter/merge_requests/497
When free'ing a pipeline we destroy the BigState first and then the fragment and
vertex snippets lists using the big state pointer which is now invalid.
This causes a crash when G_SLICE=always-malloc is set and using MALLOC_CHECK_.
So, invert the operations by free'ing the snippet lists first, and the big state
afterwards.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/581
XLib renderer saves its data as the object cogl user data, however this data
is free'd as part of the object destruction that happens before free'ing the
renderer in _cogl_renderer_free(), from where we're calling the renderer
disconnect vfunc.
Thus in _cogl_xlib_renderer_disconnect() we happen to get an invalid pointer to
CoglXlibRenderer and we try access to it in order to close the X11 display.
This causes all the cogl tests to crash when G_SLICE=always-malloc is set and
when using MALLOC_CHECK_.
Fix this using the renderer winsys custom data instead of using cogl object data
for storing the CoglXlibRenderer, and handling the destruction of it manually.
As bonus this also makes access to the renderer data faster.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/581
By providing an (internal) table to map `CoglPixelFormat`s to their
respective properties we will be able to get rid of the unusual enum
values in the future. This is something we will need once we want to
have support for more pixel formats (such as YUV-based formats).
As an extra feature, we provide a `to_string()` method, which is quite
useful for debugging purposes (rather than deciphering enum values).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/524
We're going to add some features and extra code to CoglPixelFormat, so
it's much nicer to have it in once place. Notice also that it doesn't
make sense that e.g. `_cogl_pixel_format_get_bytes_per_pixel()` were in
a private header, since they were being exported anyway.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/524
GList's used in legacy code were free'd using a g_slist_foreach + g_slist_free,
while we can just use g_slist_free_full as per GLib 2.28.
So replace code where we were using this legacy codepath.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/576
GList's used in legacy code were free'd using a g_list_foreach + g_list_free,
while we can just use g_list_free_full as per GLib 2.28.
So replace code where we were using this legacy codepath.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/576
Cogl unit tests are just functions inside normal code files that needs to be
dload'ed by the test binary.
So in case unit-tests are enabled, we need to export those symbols.
Since map file can't be overridden, use a configure_file to generate the map
file when tests are enabled, in order to export the needed symbols.
Then goes through the source files to look unit tests checking for their macro
definition and load them with the runner script.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/442
Use find-conform-unit-tests.sh to create a meson list of tests to run.
This allows to run each test as single test with meson and to remove the timeout
for all the tests.
Instead of changing 'run-tests.sh' to take test-names as arguments we can just
generate simple dummy test-files for each test, without having to change the
tooling.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/442
