Previously when _cogl_atlas_texture_migrate_out_of_atlas is called it
would unreference the atlas texture's sub-texture before calling
_cogl_atlas_copy_rectangle. This would leave the atlas texture in an
inconsistent state during the copy. This doesn't normally matter but
if the copy ends up doing a render then the atlas texture may end up
being referenced. In particular it would cause problems if the texture
is left in a texture unit because then Cogl may try to call
get_gl_texture even though the texture isn't actually being used for
rendering. To fix this the sub texture is now unrefed after the copy
call instead.
The current framebuffer is now internally separated so that there can
be a different draw and read buffer. This is required to use the
GL_EXT_framebuffer_blit extension. The current draw and read buffers
are stored as a pair in a single stack so that pushing the draw and
read buffer is done simultaneously with the new
_cogl_push_framebuffers internal function. Calling
cogl_pop_framebuffer will restore both the draw and read buffer to the
previous state. The public cogl_push_framebuffer function is layered
on top of the new function so that it just pushes the same buffer for
both drawing and reading.
When flushing the framebuffer state, the cogl_framebuffer_flush_state
function now tackes a pointer to both the draw and the read
buffer. Anywhere that was just flushing the state for the current
framebuffer with _cogl_get_framebuffer now needs to call both
_cogl_get_draw_buffer and _cogl_get_read_buffer.
As noted in commit ce3f55292a an explict glFlush is needed for
both glBlitFramebuffer and glXCopySubBuffer.
_clutter_backend_glx_blit_sub_buffer was already doing an explicit
flush when using glBlitFramebuffer, so just do it unconditonally
and remove the call from clutter_stage_glx_redraw.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2558
Since we realize on creation we need to unrealize on destruction. This
makes sure that the ClutterStageWindow implementation can tear down any
resource set up during the realization phase.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2559
* nobled/wayland-fixes2:
wayland: fix shm buffers
wayland: set renderable type on dummy surface
wayland: check for egl extensions explicitly
wayland: fall back to shm buffers if drm fails
wayland: add shm buffer code
wayland: make buffer handling generic
wayland: really fix buffer format selection
wayland: fix pixel format
wayland: clean up buffer creation code
wayland: don't require the surfaceless extensions
wayland: check for API-specific surfaceless extension
wayland: fix GLES context creation
wayland: use EGL_NO_SURFACE
wayland: update to new api
wayland: fix connecting to default socket
fix ClutterContainer docs
The 'in_clone_paint' parameter of the private function
_clutter_actor_set_in_clone_paint() shadowed the private function
in_clone_paint(). Rename this parameter to 'is_in_clone_paint' to remove
a compiler warning.
If an actor was partially off of the stage, it would be clipped because
of the stage viewport. This produces problems if you use an offscreen
effect that relies on the entire actor being rendered (e.g. shadows).
Expand the viewport in this scenario so that the offscreen-rendering isn't
clipped.
This fixes http://bugzilla.clutter-project.org/show_bug.cgi?id=2550
Replace the opacity_parent with an opacity_override variable, to allow
direct overriding of the paint opacity and simplify this mechanism
somewhat.
This also required a new private flag, in_clone_paint, to maintain the
functionality of the public function clutter_actor_is_in_clone_paint()
We use the micro version for distinguishing released tarballs and Git
builds; the maintainer compiler flags should be enabled for the latter,
and not just for unstable cycles, since it makes sense to have extra
warning flags even on stable cycles.
We also want to allow people to turn on -Werror on demand, so let's add
a third option to --enable-maintainer-flags.
When pushing a framebuffer it would previously push
COGL_INVALID_HANDLE to the top of the framebuffer stack so that when
it later calls cogl_set_framebuffer it will recognise that the
framebuffer is different and replace the top with the new
pointer. This isn't ideal because it breaks the code to flush the
journal because _cogl_framebuffer_flush_journal is called with the
value of the old pointer which is NULL. That function was checking for
a NULL pointer so it wouldn't actually flush. It also would mean that
if you pushed the same framebuffer twice we would end up dirtying
state unnecessarily. To fix this cogl_push_framebuffer now pushes a
reference to the current framebuffer instead.
After a dependent framebuffer is added to a framebuffer it was never
getting removed. Once the journal for a framebuffer is flushed we no
longer depend on any framebuffers so the list should be cleared. This
was causing leaks of offscreens and textures.
Unlike glXSwapBuffers, glXCopySubBuffer and glBlitFramebuffer don't
issue an implicit glFlush() so we have to flush ourselves if we want the
request to complete in finite amount of time since otherwise the driver
can batch the command indefinitely.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2551
This adds a note to clarify that cogl_matrix_multiply allows you to
multiply the @a matrix in-place, so @a can equal @result but @b can't
equal @result.
When uploading the layer matrix to GL it wasn't first calling
glActiveTextureMatrix to set the right texture unit for the
layer. This would end up setting the texture matrix on whatever layer
happened to be previously active. This happened to work for
test-cogl-multitexture presumably because it was coincidentally
setting the layer matrix on the last used layer.
This adds a conformance test which paints using a pipeline that has
two layers containing textures. Each layer has a different user
matrix. When the two layers are combined with the right matrices then
all of the colors end up white. The test then verifies this by reading
back the pixels.
As the prelude to deprecation of the function in 1.8, let's move the
implementation to an internal function, and use that instead of the
public facing one.
The venerable test-actors used the default stage, which meant that
closing the window just stopped the main loop but left the scene intact.
This does not happen with a normal stage created through
clutter_stage_new().
The change happened in 6ed6b2a54b, in an
unhelpfully named commit that was just supposed to switch to static
colors. My bad.
Anyway, the change led to some assertion failures when closing the stage
in the middle of an animation.
The correct thing to do when using an actor from another object (a
Timeline ::new-frame callback in this case) without owning the instance
is to connect to the ::destroy signal and clean up the pointer to avoid
calling an invalid actor.
The GQueue that stores the global events queue is handled all over the
place:
• the structure is created in _clutter_backend_init_events();
• the queue is handled in clutter-event.c, clutter-stage.c and
clutter-backend.c;
• ClutterStage::dispose cleans up the events associated with
the stage being destroyed;
• the queue is destroyed in ClutterBackend::dispose.
Since we need to have access to it in different places we cannot put it
inside ClutterBackendPrivate, hence it should stay in ClutterMainContext;
but we should still manage it from just one place - preferably by the
ClutterEvent API only.
In the future, we want event translators to be the way to handle events
in backends. For this reason, they should be a part of the base abstract
ClutterBackend class, and not an X11-only concept.
Instead of asking all backends to do that for us, we can call
ClutterStageWindow::redraw ourselves by default.
This changeset fixes all backends to actually do the right thing, and
move the stage implementation redraw inside the ClutterStageWindow
implementation itself.
We need to *write* to the shared memory, not read from it.
cogl_texture_from_data() is read-only, it doesn't keep
the data in sync with the texture.
Instead, we have to call cogl_texture_get_data() ourselves
to sync manually.
eglGetProcAddress() returns non-null function pointers
whether or not they're actually supported by the driver,
since it can be used before any driver gets loaded. So
we have to check if the extensions are advertised first,
which requires having an initialized display, so we split
the display creation code into its own function.
The exception to extension-checking is EGL_MESA_drm_display,
since by definition it's needed before any display is even
created.
Show how to animate an actor using a ClutterPathConstraint.
This demonstrates how to get effects similar to
ClutterPathBehaviour with the modern animation APIs.
Includes 3 examples:
1) Simple ClutterPathConstraint used with implicit animations
2) ClutterPathConstraint used to simulate circular animation,
using ClutterAnimator
3) Creating simple curved path animations with non-linear
easing
Use both the MappingNotify event and the XKB XkbMapNotify event, if
we're compiled with XKB support.
This change is also useful for making ClutterKeymapX11 an event
translator and let it deal with XKB events internally like we do for
stage and input events.
Based on a patch by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off by: Emmanuele Bassi <ebassi@linux.intel.com>
http://bugzilla.clutter-project.org/show_bug.cgi?id=2525
