Don't update the stack until after setting the window->transient_for
field. Updating before will cause the stack transient-for constraint to
be missing until the next time constraints are applied.
https://bugzilla.gnome.org/show_bug.cgi?id=755606
The test runner sends a "show" command to the test clients and assumes
this was enough work done by the client to enable the compositor to map
the window. Now that we wait to show a Wayland window until the first
buffer is attached (see bug 750552), we need to make sure that we attach
a buffer before assuming that we have the final stacking order.
So, to in order to continue relying on "show" to be enough to actually
show a window, let the test client wait until it has drawn the first
frame.
This makes the tests using Wayland clients test non-flaky.
https://bugzilla.gnome.org/show_bug.cgi?id=754711
When managing a non-OR window we're required by the ICCCM to behave as
if we received a ConfigureRequest which means that we must generate a
synthetic ConfigureNotify even if the window isn't moved or resized
from its current (initial) geometry.
During MetaWindow's x11/wayland split a slight behavior change for x11
windows crept in. Before the code split, MetaWindow->rect was
initialized with the X window's geometry, but now we're not
initializing MetaWindowX11Private->client_rect which causes the checks
for whether it's necessary to move/resize the window in
meta_window_x11_move_resize_internal() to tell us that we do need to
move/resize which means we do an XConfigureWindow() call and don't
send the sythetic ConfigureNotify. But since the X window isn't really
moving, the XConfigureWindow() call doesn't cause the X server to
generate a ConfigureNotify which breaks some clients such as Java's
AWT.
We can fix this by setting MetaWindowX11Privatew->client_rect for both
OR and non-OR windows. We can set buffer_rect for non-OR windows as
well to simplify the code since it will be assigned the correct value
in meta_window_x11_move_resize_internal() .
https://bugzilla.gnome.org/show_bug.cgi?id=759492
During xwayland initialization we run main loop and dispatch wayland
events, so that xwayland can initialize. If some client during this
phase connects and creates surface, mutter crashes because
it is not initialized yet. If we bind wayland socket after xwayland
is initialized and main loop is not running anymore, no client can
connect to mutter during initialization and that is what we want.
https://bugzilla.gnome.org/show_bug.cgi?id=751845
GDesktopTouchpadScrollMethod was used instead of GDesktopTouchpadClickMethod
which became visible now that the former has been removed from
gsettings-desktop-schemas.
https://bugzilla.gnome.org/show_bug.cgi?id=759304
When the touchpad is two-finger scrolling capable, always enable it.
When the touchpad only supports edge scrolling (usually older devices, and
usually smaller devices), allow disabling the edge scrolling.
This requires a newer gsettings-desktop-schemas as the scroll-method key
was removed, and the edge-scroll-enabled key added.
https://bugzilla.gnome.org/show_bug.cgi?id=759304
Wine removes the minimize func from its Motif hints on full-screen
windows, because, as the Win32 API literally says, the minimize button
is indeed not visible on full-screen windows.
Given that this code was added to prevent minimizing a panel by
accident, I don't necessarily think that it's relevant anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=758186
Unsetting it in meta_display_handle_event() will make the pointer
emulation checks fail on TOUCH_END event handlers across clutter
actors, the sequence should still be considered as pointer emulating
at that time.
As we don't have a way to hook this post clutter event handling,
instead unset/reset it lazily on the next pointer emulating TOUCH_BEGIN
event, the checks would already fail on other sequences, even if the
pointer emulating touch ended earlier. The only extra thing we need
to take care about is sequence collision, at which point it's safe to
just unset the stored sequence if its new incarnation isn't flagged/
deemed as pointer emulating.
https://bugzilla.gnome.org/show_bug.cgi?id=756754
The max potential number of logical monitors (i.e. MetaMonitorInfos)
is the number of CRTCs, not the number of outputs.
In cases where we have more enabled CRTCs than connected outputs we
would end up appending more MetaMonitorInfos to the GArray than the
size it was initialized with which means the array would get
re-allocated rendering invalid some MetaCRTC->logical_monitor pointers
assigned previously and thus ending in crashes later on.
https://bugzilla.gnome.org/show_bug.cgi?id=751638
Use the xdg_shell XML file installed by wayland-protocols instead of
our own copy. This protocol has yet to go through any unstable naming,
but since we had an outdated (though wire compatible) version, some
minor changes were needed.
https://bugzilla.gnome.org/show_bug.cgi?id=758633
Remove our own copy of the pointer gestures protocol, and us the one
installed by wayland-protocols. This also means the new fixed unstable
naming conventions are used for the new version of the protocol, which
is reflected in the change. No functional changes were made, it is only
a rename.
https://bugzilla.gnome.org/show_bug.cgi?id=758633
When running as a native compositor, we can just do that. However, the
previous code must stay for whenever it's run as a X11 client.
Additionally, the fallback switch{} that transforms clutter 1-indexed
buttons into input.h event codes had to be adapted to the change introduced
in clutter commit 83b738c0e, where the 4-7 button range is kept clear for
compatibility with the X11 backend.
https://bugzilla.gnome.org/show_bug.cgi?id=758239
On the wire, Wayland specifies the refresh rate in milliHz. Mutter sends
the refresh rate in Hz, which confuses clients, e.g. weston-info:
interface: 'wl_output', version: 2, name: 4
mode:
width: 2560 px, height: 1440 px, refresh: 0 Hz,
flags: current preferred
interface: 'wl_output', version: 2, name: 5
mode:
width: 3200 px, height: 1800 px, refresh: 0 Hz,
flags: current preferred
and xrandr:
XWAYLAND0 connected 2560x1440+3200+0 600mm x 340mm
2560x1440@0.1Hz 0.05*+
XWAYLAND1 connected 3200x1800+0+0 290mm x 170mm
3200x1800@0.1Hz 0.03*+
Export the refresh rate in the correct units. For improved precision,
perform the KMS intermediate calculations in milliHz as well, and
account for interlaced/doublescan modes.
This is also consistent with what GTK+ expects:
timings->refresh_interval = 16667; /* default to 1/60th of a second */
/* We pick a random output out of the outputs that the window touches
* The rate here is in milli-hertz */
int refresh_rate = _gdk_wayland_screen_get_output_refresh_rate (wayland_display->screen,
impl->outputs->data);
if (refresh_rate != 0)
timings->refresh_interval = G_GINT64_CONSTANT(1000000000) / refresh_rate;
Where the 'refresh_rate' given is exactly what's come off the wire.
1000000000/60000 comes out as 16667, whereas divided by 60 is ...
substantially less.
https://bugzilla.gnome.org/show_bug.cgi?id=758653
If a client only ever sets the hint on window creation we'd never pick
the value. Also, include override redirect windows since the hint is
relevant to them too.
https://bugzilla.gnome.org/show_bug.cgi?id=758544
When managing window, we queue showing the window.
Under wayland, if we commit surface quickly enough,
the showing is unqueued and commit procedure takes care
of mapping and placing the window. In the oposite case,
queue is processed before client sets all we need and
then we have wrong size of window, which leads to broken placement.
Therefore force placement in queue only if the window should already
be mapped. If it is not mapped, we don't care where it is anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=751887
On Odroid U2 (exynos4412) the drm device is not bound to pci.
Open the detection to platform device of the drm subsystem, exclusive of
control devices.
https://bugzilla.gnome.org/show_bug.cgi?id=754911
Failing to initialize Clutter isn't something it's useful to report
into automatic bug tracking systems or get a backtrace for - in fact,
the most common case is that DISPLAY is unset or points to a
non-existent X server. So simply exit rather than calling g_error().
https://bugzilla.gnome.org/show_bug.cgi?id=757311
g_error() is the wrong thing to do when, for example, we can't find the
DRM device, since Mutter should just fail to start rather than reporting
a bug into automatic bug tracking systems. Rather than trying to decipher
which errors are "expected" and which not, just make all failure paths
in meta_launcher_new() return a GError out to the caller - which we make
exit(1).
https://bugzilla.gnome.org/show_bug.cgi?id=757311
The qxl kms driver has a bug where the cursor gets hidden
implicitly after a drmModeSetCrtc call.
This commit works around the bug by forcing a drmModeSetCursor2
call after the drmModeSetCrtc calls.
This is pretty hacky and won't ever go upstream.
https://bugzilla.gnome.org/show_bug.cgi?id=746078
The default theme started to use them in GTK+ commit 371f50, so
we need to update the style contexts to keep matching the style
of client-side decorations.
https://bugzilla.gnome.org/show_bug.cgi?id=757101
Ubuntu ships a patch in the X server that makes the group switch
keybindings only work on key release, i.e. the X server internal group
locking happens on key release which means that mutter gets the
XKB_KEY_ISO_Next_Group key press event, does its XLockGroup() call
with a new index and then, on key release, the X server moves the
index further again.
We can work around this without affecting our behavior in unpatched X
servers by doing a XLockGroup() every time we're notified of the
locked group changing if it doesn't match what we requested.
https://bugzilla.gnome.org/show_bug.cgi?id=756543
In a HiDPI environment, all gtk+ apps will report a 2 x 2 size
increment to avoid odd size. But that does not mean they are
resizing in cells like terminals, so they resize popup should
not be shown.
Ideally, we should ignore <= scale x scale increments, but in
practice scale is 1 or 2, and even in a lo-dpi setting a 2 x 2
increment makes little sense so let's keep the patch simple.
https://bugzilla.gnome.org/show_bug.cgi?id=746420
Right now we just check the pointer serial, so the popup will be
immediately dismissed if the client passes a serial corresponding to
another input device.
Abstract this a bit further and add a meta_wayland_seat_can_popup() call
that will check the serial all input devices. This makes it possible to
trigger menus through touch or keyboard devices.
https://bugzilla.gnome.org/show_bug.cgi?id=756296
