The hacks we were playing by calling gdk_error_trap_push() and then
resetting the error handler are incompatible with the rewrite of
GDK error traps.
Since the new error code has some features that simplify what we
are doing (like automatically figuring out whether a XSync() is needed)
and because our custom error handler didn't have a lot of a point,
use a separate code path for GTK+ 3.0 builds that just uses the
GDK error traps straight-up without a custom error handler.
https://bugzilla.gnome.org/show_bug.cgi?id=630195
Wine sets _NET_WM_USER_TIME_WINDOW to point to an unmapped toplevel;
this was causing much confusion because both the real window and
the unmapped window were in the window stack and mapped back to the
same MetaWindow.
Debugged by Alban Browaeys
https://bugzilla.gnome.org/show_bug.cgi?id=593887
When dragging a window over a screen edge and dropping it there,
maximize it vertically and scale it horizontally to cover the
corresponding half of the current monitor.
Whenever a "hot area" which triggers this behavior is entered, an
indication of window's target size is displayed after a short delay
to avoid distraction when moving a window between monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=606260
Add a preference /apps/mutter/general/attach_modal_dialogs. When true, instead
of having independent titlebars, modal dialogs appear attached to the titlebar
of the parent window and are moved together with the parent window.
https://bugzilla.gnome.org/show_bug.cgi?id=612726
Cleanly build with --warn-fatal. Implementation:
* Liberally apply (skip) where the API is clearly C only, e.g. uses
XLib. The theming code and MutterPlugin are skipped too.
* Add missing (transfer) and (element-type) annotations
For a few functions that had a comment, I turned it into gtk-doc, but
I didn't (with a few exceptions) try to write new documentation in
this pass.
If the user just presses a modifier (e.g., shift) during Alt+Tab grab, we need
to keep the grab in place to allow the custom Alt+Tab handler to deal with what
might simply be a change of tabbing direction.
https://bugzilla.gnome.org/show_bug.cgi?id=613126
This patch adds a check in event_callback () to check whether the
window is override-redirect or not, and avoids unnecessarily calling
meta_window_set_user_time () if it is.
https://bugzilla.gnome.org/show_bug.cgi?id=606158
When we do pseudo-management on an override-redirect window, we have to be
careful to augment the existing event mask, not replace it, or
delivery of pointer events will be disrupted.
When we unmanage a window, we shouldn't try to unselect events at all,
since that will interfere with event selection done by GDK.
http://bugzilla.gnome.org/show_bug.cgi?id=597763
Export a boxed type for MetaRectangle; this is mostly of interest
because GdkRectangle has been turned into a typedef for
cairo_rectangle_int_t which causes massive problems for using it from
gobject-introspection based language bindings.
https://bugzilla.gnome.org/show_bug.cgi?id=623335
A mismerge of the Metacity commit "4943d79 Prevent window self-maximisation"
caused the window's user set size and position to be saved *before*
actually resizing the window to the unmaximized position rather than after.
This meant that after unmaximization the window was in an inconsistent
state and anything that caused a resize to be queued (like a change in
window properties by the application) would cause it to pop back to
the maximized size and position.
https://bugzilla.gnome.org/show_bug.cgi?id=621413
It's useful for plugins to be able to easily detect whether
or not a window is from a remote host. Also, make use of this
in the window delete codepath, instead of looking up the hostname
each time.
https://bugzilla.gnome.org/show_bug.cgi?id=620585
While debugging a focus problem, I noticed that Mutter had exactly
the debug statements I wanted under the META_DEBUG_FOCUS topic.
However, calling meta_set_verbose (true) results in enormous amounts
of other messages, and it's inconvenient to filter after having
started mutter.
This patch allows one to call Meta.add_debug_topic(Meta.DebugTopic.FOCUS)
from a console, and get just what one wants.
https://bugzilla.gnome.org/show_bug.cgi?id=620359
This function returns xid of the WM leader window (as defined by the
_NET_SUPPORTING_WM_CHECK mechanism of EWMH). For use by plugins that wish to
attach custom properties to this window.
https://bugzilla.gnome.org/show_bug.cgi?id=613125
Changing the number of workspaces via an external pager relies on the gconf
key; if a plugin adds or removes workspaces on the fly, we can get into a
situation when the stale number stored by the preferences matches the new
number requested by the pager, in which case the pager request becomes a nop.
This commit ensures that when the meta_screen_append_new_workspace() or
meta_screen_remove_workspace() functions are called, the stored value is
updated accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=613127
A per-window _MUTTER_HINTS property allowing plugins to use custom hints. The
property holds a colon separated list of key=value pairs; plugin-specific keys
must be suitably namespaced, while 'mutter-' prefix is reserved for internal
Mutter use only.
This commit adds MetaWindow::mutter-hints property, and
meta_window_get_mutter_hints() accessor, as well as the internal machinery for
reading and updating of the hints.
https://bugzilla.gnome.org/show_bug.cgi?id=613123
Although multi-screen support has not been tested and probably
doesn't fully work, the basic setup for multi-screen is that
we have the same list of plugins for all screens, but a different
instance of the plugins for each screen.
To allow plugins to do setup that is screen independent and needs
to occur early in the setup process, we identify a "default plugin
manager" and load (but not start) that plugin manager's plugins
immediately after we know our list of plugins.
That plugin manager is then reused for the first screen we open
and the plugins are started at that time. Separate plugin managers
are loaded and started for any other screens we open.
(A plugin could keep track of whether the screen-independent
setup has been done in a static variable, or it could do everything
in a way that is safe to do repeatedly.)
https://bugzilla.gnome.org/show_bug.cgi?id=615586
Allow a plugin to redirect preferences from one GConf location
to another GConf location. This is useful for keys that need to be
set differently in a plugin-managed environment (like GNOME Shell)
as compared to in standalone Metacity.
Overriding is implemented by overwriting the keys in the arrays
of preferences; a list of the current overrides is stored to allow
proper memory management when an override is itself overriden.
(we need to know whether to free the old keys or not)
This patch cleans up the comments in prefs.c a bit as well; some ideas
about less-exciting potential improvements were removed to make the
comments explaining the structure easier to figure out.
https://bugzilla.gnome.org/show_bug.cgi?id=615586
The change to using gconf_client_all_entries() in commit 2d57b1b4
meant that workspaces without a GConf key for their name were not
getting a name at all. Fix this by doing a post-processing loop
to set workspace names that were not otherwise set.
Alternate to patch from Tomas Frydrych
https://bugzilla.gnome.org/show_bug.cgi?id=613136
The change to reduce GConf trips by using
gconf_client_all_entries() broke the fallback to builtin values
because update_binding() was no longer called for bindings not
found in GConf. Fix this by keeping track of the bindings we
find from GConf in a hash table, then looping through and setting
all the bindings at the end.
This also improves efficiency by avoiding a linear scan for each
binding in GConf.
https://bugzilla.gnome.org/show_bug.cgi?id=609710
When we are reading bindings initially, update_list_binding() needs
to be passed the correct "string list type" since we are calling
it with a list of strings instead of a list of GConfValue.
https://bugzilla.gnome.org/show_bug.cgi?id=609101
Whether Metacity honors a raise request from an application should
not be affected by the raise_on_click setting; remove a check that
seems to have been added in error.
https://bugzilla.gnome.org/show_bug.cgi?id=445447
When we are moving a window with a modal dialog to a different
workspace, meta_workspace_focus_default_window() can be called
with 'not_this_one' being the focused modal dialog.
Since the ancestor of that window is also being moved, we must
not focus it as an alternative to the current window; this will
cause windows to be moved back and Metacity to get into an
inconsistent confused state.
https://bugzilla.redhat.com/show_bug.cgi?id=237158https://bugzilla.gnome.org/show_bug.cgi?id=598995
We currently allow XRaiseWindow when the same application (defined
by the window group) is focused, but the kind of old applications
that XRaiseWindow are frequently not setting the window group.
Expand the check to allow the same X client (defined by the looking
at client ID) to raise windows above the focus window.
https://bugzilla.gnome.org/show_bug.cgi?id=567528
When started without session related command line parameters (e.g. from
gnome-session), metacity picks up client_id from the DESKTOP_AUTOSTART_ID
environment variable. Unfortunately, there is no way to distinguish if this was
passed from a config file, representing old saved session, or generated by
gnome-session, therefore load_state is attempted in each case. If the client_id
is generated, there will be no session file, and metacity will report a
warning.
Just remove the warning so that users won't always find a warning at the
start of their .xsession-errors.
https://bugzilla.gnome.org/show_bug.cgi?id=577576
The atk-bridge GTK+ module opens its own display; if we get an
XIOError on that display, we shouldn't abort with a meta_bug()
but just exit normally. Also fix a segfault if we got an XError
for that display.
https://bugzilla.gnome.org/show_bug.cgi?id=604319
Add a configure switch:
--with-libcanberra=[yes/no/auto]
(defaulting to auto); if libcanberra is not found or explicitly
disabled, then the default system bell will be used for the bell
sound and no switch workspace sound is played.
https://bugzilla.gnome.org/show_bug.cgi?id=609585
These sounds are good candidates for caching in the sound server, to
save a bit of CPU and make reaction faster. Hence, tell libcanberra to
cache them.
https://bugzilla.gnome.org/show_bug.cgi?id=609585
Right now metacity issues only 1 bell event per second. This is
feels buggy when triggering multiple alarm sounds in a terminal.
This patch simple increases the limit to 1/100ms. 100ms is probably a
good choice since the HIG recommends that all user reaction should
happen within 100ms. With this applied pressing 'Left' in gnome-terminal
feels much more responsive.
https://bugzilla.redhat.com/show_bug.cgi?id=498608https://bugzilla.gnome.org/show_bug.cgi?id=609585
* src/core/bell.c: Don't force CA_PROP_CANBERRA_ENABLE to 1.
That was a misunderstanding on my part, and makes it impossible
to get rid of the bell.
svn path=/trunk/; revision=4165
https://bugzilla.gnome.org/show_bug.cgi?id=609585
* src/core/bell.c (meta_bell_set_audible): Now that we are
using libcanberra, don't tell the X server to play the system
bell internally.
svn path=/trunk/; revision=4141
https://bugzilla.gnome.org/show_bug.cgi?id=609585
metacity tries to do the right thing, by preloading all the relevant
directories before getting the keys one-by-one, but GConfClient isn't actually
smart enough to avoid server roundtrips in this case. That should certainly be
fixed in GConf.
In the meantime, here is a patch that reworks the metacity prefs initialization
to avoid roundtrips for individual keys anyway, by using
gconf_client_all_keys().
https://bugzilla.gnome.org/show_bug.cgi?id=574121https://bugzilla.gnome.org/show_bug.cgi?id=607746
The ICE connection is opened by libSM; we can't just close it when
we get an IOError on the ICE connection; instead call SmcCloseConnection()
and mark the connection as closed. This will prevent a segfault if we
exit out of the metacity main loop and get to meta_finalize().
https://bugzilla.gnome.org/show_bug.cgi?id=604867
Windows demanding attention should never appear in the alt-tab list
unless they're of a type which might have appeared there anyway. This
solves a problem under AWN where docks which were marked as demanding
attention appeared in all alt-tab lists; they were irrelevant and it
was impossible to remove them from the lists.
svn path=/trunk/; revision=4123
(This is inspired by Metacity commit 45cbaa2 by Thomas Thurman, but
much simpler - the use of g_date_strftime("%Y") ended up being just
%d for all 90+ current translations)
meta_workspace_set_builtin_struts() is slightly expensive; it involves
discarding all our cached computed information about the layout of the
workspace. So catch calls to set_builtin_struts() that don't change
anything.
https://bugzilla.gnome.org/show_bug.cgi?id=609546
Since meta_workspace_invalidate_work_area() frees the edges
workspace->screen_edges and workspace->monitor_edges, we must clean up
our cached edge resistance data when the invalidate_work_area() is
called on the active workspace, or when the workspace changes.
Make the computation of the edge resistance data lazy so that it
will be recomputed the next time we try to access it.
meta_display_compute_resistance_and_snapping_edges() is made
private to edge-resistance.c
Invaliding the data when active workspace changes also will improve
correctness for edge resistance when the current workspace changes
during a grab operation. (Even with this fix we still don't try to
handle window positions changing during a grab operation; that can't
cause a crash since, unlike screen and monitor edges, the window edges
are freshly allocated, it will just cause slight oddness in that
corner case.)
Root cause tracked down due to much effort by Jon Nettleton.
https://bugzilla.gnome.org/show_bug.cgi?id=608800
When putting 32-bit properties into longs on 64-bit architectures,
XGetWindowProperty assumes the values are supposed to be signed, and
so it sign-extends values greater than 0x7fffffff. So if they *aren't*
supposed to be signed, we need to chop off the high bits ourselves.
(Most CARDINAL-valued properties only end up using small values
anyway, so it doesn't matter, but _NET_WM_WINDOW_OPACITY uses the full
range, and so was previously failing on 64-bit machines.)
https://bugzilla.gnome.org/show_bug.cgi?id=605678
The commit that removed metacity-dialog added a global SIGCHLD handler
that caused problems by (a) calling waitpid(-1) and thus breaking
g_child_watch for everyone else, and (b) doing too much from a signal
handler and sometimes causing deadlocks (bug 596200).
This removes the global handler and has each zenity user create its
own child watch to watch for exit. (It also fixes the window class of
the zenity dialogs, so that meta_window_present_delete_dialog() will
work again.)
Having a MetaDisplay::window-demands-attention signal allows to deal with
windows demanding attention in a cetralized fashion.
The signal is emitted when a window is created with initial demands-attention
state and/or when the state changes later on.
Based on original patch by Jon Nettleton.
https://bugzilla.gnome.org/show_bug.cgi?id=597052
With the change from bug 582639, we no longer call the reload
functions for properties that are not initially set, so the
initialization of fields in window.c has to match what
window-props.c would set for a missing property.
There was only one discrepancy, window->input, which needs
to be set to TRUE by default (or a window missing a WM_HINTS
property won't get focus); we also add explicit initializers
for a couple of fields that were getting 0-initialized
to the correct default value of FALSE for consistency with
the explicit intialization of the rest of the fields.
Bug reported by Dominique Leuenberger
https://bugzilla.gnome.org/show_bug.cgi?id=601228
For some consumers it's significantly more convenient to be able
to directly connect to a signal on the Window to know when
Mutter is done with it, rather than having to connect to each
Workspace object (and handle workspace additions, etc.).
Similarly, add window-created which acts globally.
https://bugzilla.gnome.org/show_bug.cgi?id=598289
When we focus a window on a different desktop, and the calc_showing
idle that hides/shows the windows gets run before we get focus events
back from X, we think that we are hiding the window with the focus
so we focus a "random" window to avoid leaving the user with no focus.
Work around this temporarily by checking display->expected_focus_window;
this isn't a perfect fix because there are cases where
display->expected_focus_window corresponds to a window we tried to
focus in the past but failed, but it makes things work fairly well.
https://bugzilla.gnome.org/show_bug.cgi?id=597352
When we create the timeline dummy timeline to ensure that our later
functions that should be run during repaint get called called, pass in
G_MAXUINT to make the duration very long, not 0. (It will get reset
whenever there is no repaint later to run, so the fact that G_MAXUINT
is only ~40 days isn't a problem.)
This fixes a warning from Clutter, but also a real problem.
There was a problem where if, for example, a restack was triggered
out of a clutter event handler, then after Clutter processed the
events, it would proceed immmediately on to repaint the stage without
ever returning control to the GLib main loop. So even though we
had an idle handler installed with a higher priority than the
Clutter stage repainting the clutter stage repainting would happen
first and we'd get a wrong frame.
Fix this by introducing the idea of "later functions", which abstract
the idea of "doing something later" away from g_idle_add() and use
a combination of GLib idle functions and Clutter "repaint functions"
to get our callbacks triggered at the right time, even when they
are installed from a clutter event handler.
https://bugzilla.gnome.org/show_bug.cgi?id=596334
This also resolve a FIXME where MUTTER_PRIORITY_BEFORE_REDRAW
could starve stage repainting.
We need a way to indicate to gnome-control-center that we want the
keybindings capplet to show the Window Manager keybindings for Metacity;
do this through a _GNOME_WM_KEYBINDING property we put on the
_NET_SUPPORTING_WM_CHECK window and set to Mutter,Metacity.
See http://bugzilla.gnome.org/show_bug.cgi?id=594066 for the
gnome-control-center part of this.
http://bugzilla.gnome.org/show_bug.cgi?id=594067
It seems a bit cleaner to make the MUTTER_DEBUG_XINERAMA variable
that sets up fake Xinerama take effect even if Xinerama is active;
this means we don't count on Xinerama (or Xrandr if we switch tot
that) special casing the case of one monitor.
http://bugzilla.gnome.org/show_bug.cgi?id=593404
Unminimize minimized windows passed to meta_workspace_activate_with_focus()
by calling meta_window_activate() on them instead of meta_window_focus()
and meta_window_raise(). This fix makes sense because for the existing
usage inside Mutter meta_workspace_activate_with_focus() is never called
on a minimized window and for calls from outside Mutter there is no
point in focusing a minimized window without unminimizing it first.
Add a doc comment to meta_workspace_activate_with_focus().
http://bugzilla.gnome.org/show_bug.cgi?id=592393
The changes to enforce single handling of all key events were breaking
custom-alt-tab keypress handlers, since that code was assuming that
key event would get to process_tab_grab(), and then maybe to
process_event() and then to the plugin's xevent_filter to detect a
key release.
We centeralize all of this handling into process_tab_grab() and either
- Invoke a custom handler for the key press
- Select the current window on modifier release by calling a new
pseudo-binding "tab_popup_select"
- Cancel the grab on an unbound key by calling a new pseudo-binding
"tab_popup_cancel"
http://bugzilla.gnome.org/show_bug.cgi?id=590754
mutter_plugin_begin_modal() and mutter_plugin_begin_modal() allow putting
a plugin into a "modal" state. This means:
- The plugin has the keyboard and mouse grabbed
- All keyboard and mouse events go exclusively to the plugin
mutter-plugin.[ch]: Add public API
compositor.c compositor-private.h: Implement the API
mutter-plugin-manager.c: When reloading plugins, make sure none of them
are modal at that moment, and if so force-unmodal them.
common.h: Add META_GRAB_OP_COMPOSITOR
display: When display->grab_op is META_GRAB_OP_COMPOSITOR forward relevant
events exclusively to the compositor.
http://bugzilla.gnome.org/show_bug.cgi?id=590754
Only process each key event once. If all keys are grabbed, then
don't also look for handlers for a key shortcut after processing
the grab op. If all keys are grabbed or we find a key shortcut,
don't pass the event on to the compositing mananger.
http://bugzilla.gnome.org/show_bug.cgi?id=590754
The previous notification code was attempting to use the "modified"
boolean returned from set_title_text, but "that boolean doesn't mean
what you think it means". It actually means "I truncated the title".
Just always notify, it's far simpler than trying to compute
when we don't need to, and callers can compress if they really need
to.
mutter-window.c originally grew an #include "window-private.h" for
window->override_redirect, but that was just fixed. However since
then it also ended up relying on a few other minor private bits.
To fix that, add meta_window_is_mapped, promote meta_window_toplevel_is_mapped
to public, and use the public MetaDisplay accessor.
The functionality to propagate errors for other displays to other
a "foreign error handler" was Soeren's compositor and is no longer
being used. Remove it.
(Now that error.h is being installed and scanned, we need to either
do this or add XErrorEvent to xlib-2.0.gir and rename ErrorHandler
to MetaErrorHandler. This way is a bit simpler.)
It's useful for plugins to be able to get access to the
startup-notification data that Mutter already has. Add
an accessor and change signal when recieve an event.
When window initially maps, use the more recent of NET_WM_USER_TIME and
startup notification timestamps to compare against last known user action to
decide whether to focus the window or not. Once we show the window, clear
the initial_timestamp_set flag, so the startup notification timestamp is not
taken into account again.
Based on patch for metacity by Alexander Larsson
http://bugzilla.gnome.org/show_bug.cgi?id=573922
Many override-redirect windows (including the Metacity UI windows!)
will have NET_WM_WINDOW_TYPE_NORMAL set on them because of shared
code paths with normal windows in toolkits.
Some current Compositor plugins (default plugin and gnome-shell)
check type == NORMAL to determine if to run effects. While fixing
such plugins to also check if the window is override-redirect is
posisble, it seems cleanest to simply not allow any of the decorated
window types to be set on an override-redirect window and to force
these types to META_WINDOW_OVERRIDE_OTHER. This will prevent other
similar problems from showing up in the future.
http://bugzilla.gnome.org/show_bug.cgi?id=590971
When calculating maximum permissible size of our frame window, we need to
avoid an overflow if the application set its max size hint to INT_MAX.
http://bugzilla.gnome.org/show_bug.cgi?id=590627
As a sideffect of commit a576f7a1ea, override
redirect windows of type _NET_WM_WINDOW_TYPE_NORMAL do not have their
features recalculated during MetaWindow construction (same as regular
windows of type _NET_WM_WINDOW_TYPE_NORMAL), so we need to set the initial
values accordingly.
Although the spec designates some window types as typically used for
override redirect windows, it does not prohibit the use of these with
managed windows, so we should not abort if we encounter one of these.
http://bugzilla.gnome.org/show_bug.cgi?id=583870
As with other events, we want to pass through scroll events (button 4/5 presses)
to the compositor, whether or not they are associated with a particular MetaWindow;
do this by simply falling through to the normal code path instead of
separately delivering the events to the compositor.
http://bugzilla.gnome.org/show_bug.cgi?id=588232
Previously, changes to the visibility of a window could be indicated
by meta_compositor_map_window(), meta_compositor_unminimize_window(),
meta_compositor_set_window_hidden(), etc, with the exact behavior
depending on the 'live_hidden_windows' preference.
Simplify this so that visibility is controlled by:
meta_compositor_show_window()
meta_compositor_hide_window()
With an 'effect' parameter provided to indicate the appropriate
effect (CREATE/UNMINIMIZE/MINIMIZE/DESTROY/NONE.)
The map state of the window is signalled separately by:
meta_compositor_map_window()
meta_compositor_unmap_window()
And is used only to control resource handling.
Other changes:
* The desired effect on show/hide is explicitly stored in
MetaWindow, avoiding the need for the was_minimized flag.
At idle, once we calculate the window state, we pass the
effect to the compositor if it matches the new window
state, and then clear the effect to start over for future
map state changes.
* meta_compositor_switch_workspace() is called before any windows
are hidden or shown, allowing the compositor to avoid hiding
or showing an effect for windows involved in the switch.
http://bugzilla.gnome.org/show_bug.cgi?id=582341
* Handling of post-effect cleanups for MutterWindow are
simplified - instead of trying to do different things based
on the individual needs of different effects, we just wait until
all effects complete and sync the window state to what it
should be.
* On unmap, once we destroy the pixmap, we tell ClutterX11Pixmap
that we've done so, so it can clean up and unbind. (The
unbinding doesn't seem to be working properly because of
ClutterGLXPixmap or video driver issues.)
http://bugzilla.gnome.org/show_bug.cgi?id=587251
Add a paint function that checks all windows for repair and
shape updates; this:
- simplifies the logic for when a window needs to be repaired
- avoids duplicate work when we get multiple damage effects
- avoids the need to look ahead in the event queue
Instead of relying on repair to implicitly resize the
MutterWindow actor, set the size explicitly when the core
code updates the geometry. (This is needed because we haven't
repaired yet when we start an animation, and the animation
may depend on the size to, e.g., rescale from the center.)
Because the core geometry update happens before we start
maximize/unmaximize effects we need to work around this by
passing both the old and new geometry to the compositor.
http://bugzilla.gnome.org/show_bug.cgi?id=587251
Putting hidden windows in the desktop layer is pointless - in
the desktop layer isn't necessary below all visible windows,
and we are hiding the windows by other means. And the movement
isn't reliable because nothing sets stack->needs_relayer, so
windows can get stuck in the desktop layer after being
rehidden.
http://bugzilla.gnome.org/show_bug.cgi?id=587251
The patch adds GLib marshalling code to Mutter, since it's required for the "workspace-switched" signal.
The definition of MetaMotionDirection enum is moved to common.h since it's now used in workspace.c.
A little cleaning is done in workspace.c:meta_workspace_activate_with_focus(), where compositor-specific code is merged with the rest of the function (required to emit signal), removing #ifdefs.
Remove a number of functions that were either entirely unimplemented
or had empty implementations for the Clutter-compositor.
meta_compositor_begin_move()
meta_compositor_update_move()
meta_compositor_end_move()
meta_compositor_set_active_window()
meta_compositor_free_window()
http://bugzilla.gnome.org/show_bug.cgi?id=581813
Now that we only have one compositor, there's no reason to access the
compositor functions through a vtable. Remove the MetaCompositor virtualization
and make the clutter code implement the meta_compositor_* functions
directly.
Move the checks for the compositor being NULL from the vtable wrappers
to the calling code (most of them were already there, so just a few
needed to be added)
Note: the compositor is actually hard-coded on at the moment and the plan
is to remove the non-composited code entirely, so the checks are
added only to keep things neat: they have no practical effect.
http://bugzilla.gnome.org/show_bug.cgi?id=581813
Mutter is a Clutter-based compositing manager. So, remove the code for
the XRender-based compositor, and make it mandatory to have XComposite,
XRender and Clutter.
Run-time support for non-composited operation is left for now.
* src/compositor/mutter/: Move files from this subdirectory into
the main compositor/ directory.
* compositor/compositor-xrender.ccompositor/compositor-xrender.h:
Remove
* include/compositor-clutter.h: Remove this stray file, it had been
replaced with compositor-mutter.h some time back.
http://bugzilla.gnome.org/show_bug.cgi?id=581813
With MetaStackTracker, it's no longer necessary to XQueryTree to
get a reasonably-up-to-date view of the server stacking order.
Add some comments explaining unclear aspects of
raise_window_relative_to_managed_windows() and with future possible
improvements.
http://bugzilla.gnome.org/show_bug.cgi?id=585984
Don't add override-redirect windows to MetaStack; we shouldn't
be restacking them.
Since we *aren't* stacking the override-redirect windows, we need to
be careful that to ignore them when looking for the top managed
window.
http://bugzilla.gnome.org/show_bug.cgi?id=585984
In order to properly track the stacking order for override-redirect
windows, move meta_compositor_sync_stack() call into MetaStackTracker.
In the new location, we sync the stack as a before-redraw idle function,
rather then using the freeze-thaw facilities of MetaStack. This is
simpler, and also properly compresses multiple stack changes on
notifications received from the X server.
http://bugzilla.gnome.org/show_bug.cgi?id=585984
Wedging override-redirect windows into the constraint code in stack.c
results in Mutter getting confused about the stacking order of
these windows with respect to other windows, and may also in some
cases cause Mutter to restack override-redirect windows.
core/stack-tracker.c core/stack-tracker.h: MetaStackTracker - combine
events received from the X server with local changes we have made
to come up with the best possible idea of what the stacking order
is at any one point in time.
core/screen.c core/screen-private.h: Create a MetaStackTracker for
the screen.
core/display.c: Feed relevant events to MetaStackTracker
core/frame.c core/screen.c core/stack.c: When we make changes to the
stacking order or add windows, record those changes immediatley
in MetaStackTracker so we have the information without waiting
for a round-trip.
include/ui.h ui/ui.c: meta_ui_create_frame_window add a return value
for the X request serial used to create the window.
http://bugzilla.gnome.org/show_bug.cgi?id=585984
Override-redirect windows should not be moved or resized by the
window manager.
- Mark override-redirect windows as already placed to avoid
placing them when first shown.
- Don't move-resize newly created override-redirect MetaWindow
- Don't queue a resize on override-redirect windows when reading
their WM_TRANSIENT_FOR hint.
- Add g_return_if_fail (!window->override_redirect) to catch
unexpected code paths that might result in override-redirect
windows being moved or resized.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Normally a window that is "on all workspaces", is also on a particular
workspace (to deal with being unstuck.) This is pointless for
override-redirect windows.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Don't include override-redirect windows when iterating the windows
in the screen. We don't need them for any of the current uses:
- Queueing redraws and resizes on managed windows
- Checking which windows should be added to a new workspace
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Don't include override-redirect windows in the list return by
meta_display_list_windows(), since we almost never want to handle
them when considering "all window" for the display. Add a separate
meta_display_list_all_windows() that includes override-redirect
windows.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Skipping handling of properties for override redirect windows has
two advantages: first it reduces the amount of work needed to get
an override-redirect window (menu, tooltip, drag icon) onto the
screen. But more importantly, it reduces the number of code-paths
for an override-redirect to get into some code portion where it
isn't expected.
* Integrate the list of properties we load initially with the
list of property hooks; this avoids having two separate lists
that we have to keep in sync.
* Add a flag to MetaWindowPropHooks to indicate whether the
property should be handled for override-redirect windows;
currently we load a) properties that identify the window -
useful for debugging purposes b) WM_TRANSIENT_FOR (could be
used to associate menus with toplevels.)
* For properties that aren't always loaded through window-props.c,
add !window->override checks to places that trigger loading,
and add g_return_if_fail(!window->override) to the load
functions as a double-check.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Add g_return_if_fail() to check that window-management functions like
meta_window_maximize() aren't called on override-redirect windows.
This reveals that were were "unminimizing" override-redirect windows
when adding them; avoid doing that.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
If a property has a reload function, but the standard property-fetching
mechanism isn't used (hooks->type == META_PROP_VALUE_INVALID), then the
a logic error (introduced in January) caused the hook to never be run.
This meant that changes to struts and icons weren't noticed.
Same as: http://bugzilla.gnome.org/show_bug.cgi?id=572573
The fix here is different in detail from that applied to Metacity, but
similar in spirit.
http://bugzilla.gnome.org/show_bug.cgi?id=585980
On subsequent changes, if there is a NET_WM_USER_TIME_WINDOW, then
read the property from that rather than from the main window.
(Fix an accidental regression: the right Window was being computed
but no longer passed in.)
http://bugzilla.gnome.org/show_bug.cgi?id=585979
When we add a window and it gets hidden as the first thing, we need
to show not just the frame window, but also the window itself.
Otherwise when the window subsequently becomes visible, it will
just be an empty frame.
Add helper functions to reduce current code duplication and avoid
adding more.
http://bugzilla.gnome.org/show_bug.cgi?id=586309
