Until recently, mutter-test-runner called into libraries that
indirectly depend on (mutter's fork of) Clutter, but did not actually
call into Clutter itself. Commit 1bf70334 "tests/runner: Make test
runner use the headless backend" gave it a direct call into Clutter,
which means the runtime linker will fail unless the executable's
RUNPATH is sufficient to find Clutter.
For future-proofing, do the same for the other test executables.
Resolves: https://gitlab.gnome.org/GNOME/mutter/-/issues/2389
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2581>
This is a followup to GNOME/mutter!1578
This commit does a couple of things to avoid creating multiple
pipelines per commit.
First, it avoid catch all `when: manual` rules, which might
end up matching custom variables set which might potentially
not be handled.
Secondly it reworks the `workflow:rules:` and the pipeline guard
rules to avoid duplicate pipelines as the gitlab documentation
suggests.
Last, it switches from yaml anchors to the new `reference` gitlab
keyword which is more flexible.
https://docs.gitlab.com/ee/ci/jobs/job_control.html#avoid-duplicate-pipelines
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2534>
This adds the 4 new connector types that mutter didn't know about from
drm_mode.h in the kernel.
Noticed because mutter kept crashing when plugging in a USB-C adapter to
use an external monitor.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2577>
When we e.g. generate switch configs (i.e. the ones from pressing the
Super+P or the switch-config key on laptops), try a bit harder to find a
"good" monitor scale.
With "good", it means pick a scale that was used in a previous
configuration. In practice, this means that if you for example have
configured your external monitor to use a specific scale, then pressed
e.g. "built in only", and then switched back to e.g. "external only" or
"linear", the generated configuration will use the scale that was
previously configured.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2479>
If two modes are roughly the same, they should probably use the same UI
scaling factor. I.e. for the same monitor, if a 4K mode was configured to
have a certain scaling factor, and we generate a new configuration with
a similar sized 4K mode, we should re-use the scale previously
configured; however if we e.g. go from a 4K mode to a FHD mode, we
shouldn't.
This allows implementing better hueristics when using the switch-config
feature, where we'd be less likely to loose the for a certain monitor
mode combination previously configured scaling factor.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2479>
This will eventually help with better hueristics for finding a good
scale. It currently doesn't change much, but the helper will later gain
more functionality that will also help when coming up with mirroring
configs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2479>
The resulting logical monitor was eventually marked as primary anyway,
but without the config being marked as such, various primary properties
was not set e.g. the one on the MetaOutput. Also, tests would fail.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2479>
This condition is inverted of how it should be. Since pad focus relies
on grouped devices lookups (e.g. pads not grouped with a tablet do not
focus surfaces), this fixes issues in pad focus and event propagation to
wayland clients.
Fixes: fff3654941 - wayland: Check input device capabilities in tablet seats
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2573>
This checks that an unmapped but created Wayland window correctly handle
monitor changes. This is specifically added to test an edge case causing
a crash with the following backtrace:
```
...
4) 0x00007ffff78a2a6b in g_assertion_message_expr ()
5) 0x00007ffff7defd5b in meta_window_update_for_monitors_changed () at ../src/core/window.c:3745
6) 0x00007ffff7899758 in g_slist_foreach () at ../glib/gslist.c:885
7) 0x00007ffff7dbe562 in meta_display_foreach_window () at ../src/core/display.c:3185
8) 0x00007ffff7dbe5fd in on_monitors_changed_internal () at ../src/core/display.c:3210
9) 0x00007ffff796f4ff in g_closure_invoke () at ../gobject/gclosure.c:830
10) 0x00007ffff7981316 in signal_emit_unlocked_R () at ../gobject/gsignal.c:3740
11) 0x00007ffff7987699 in g_signal_emit_valist () at ../gobject/gsignal.c:3495
12) 0x00007ffff7987bc2 in g_signal_emit () at ../gobject/gsignal.c:3551
13) 0x00007ffff7d89915 in meta_monitor_manager_notify_monitors_changed () at ../src/backends/meta-monitor-manager.c:3517
...
```
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2554>
If the window didn't have a size, it would still have a monitor, and
when we are asked to update, we must update, as the old monitor might
not be kept around, leaving us vulnerable to use after free.
Avoid not updating the monitor by using the stored IDs (preferred, or
previous) to find suitable logical monitors, with the primary monitor
being the last fallback unless we're completely headless.
This fixes the assert
!window->monitor ||
g_list_find (meta_monitor_manager_get_logical_monitors (monitor_manager),
window->monitor)
in meta_window_update_for_monitors_changed() being hit when a Wayland
window has been created, but not mapped, when a hotplug happens.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2554>
The function finds a suitable logical monitor given the window
rectangle; this wasn't all that clear from the name
"calculate_main_logical_monitor".
This is in preparation for finding a new logical monitor using things
other than the geometry of the window.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2554>
This will allow tests to change monitor resolution. The first argument
is the monitor ID; there is always one monitor added by default, and it
has the id 0. It's currently not possible to add more monitors, so
passing '0' is the only valid way to resize monitors.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2554>
This hasn't worked for a while, since the test always runs the nested
backend, meaning it's a Wayland compositor. To unblock testing window
management in combination to monitor changes, lets remove the
unreachable X11 WM paths, so that we can start using virtual monitors.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2554>
util-private.h includes glib-i18n-lib.h, which requires GETTEXT_PACKAGE
to be defined. The define comes from config.h,
but that cannot be included in headers, so we have to make sure
that any source file that pulls in util-private.h (or a header
that includes it) includes config.h first.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2566>
In some hardware configurations, presentation timestamps could be
missing from some page flip events, leading to a temporary loss of
vblank synchronization.
This occurs at least with AMD GPUs for atomic commits that only update
the cursor plane. [0]
In those cases, it's better to calculate the next update time
according to the last valid presentation timestamp instead of relying
on the dispatch lateness.
[0] https://gitlab.freedesktop.org/drm/amd/-/issues/2030
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2481>
The image build step is prone to race conditions, e.g. token changes. It
also tends to hit sporadic connection errors to FDO's gitlab. To
minimize the risk of these types of issues block pipelines, always retry
the image building step if it failed.
This has the unwanted consequence that changes to the image building
that results in the script actually failing, but right now there doesn't
appear to be a way to distinguish between actual build errors, and the
mentioned race conditions, as both cause the script to fail.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2564>
mutter needs GDK to use the x11 backend. It already calls
gdk_set_allowed_backends ("x11") for this purpose; however, if
GDK_BACKEND=wayland (or any other non-x11 backend possibly) happened to
be in the environment, GDK would fail to initialize at all. This would
result in mutter not registering as X11 window manager, and all X11
clients hanging.
Big thanks to Olivier Fourdan for figuring this out!
v2:
* Restore original value of GDK_BACKEND environment variable after
initializing GDK.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=2022283
Bug: https://bugs.debian.org/1008992
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2496>
Both the fragend and vertend shader state was called
"CoglPipelineShaderState", which was rather annoying, especially when
the type needs to be exposed outside of the .c file as part of moving
out unit tests. Make the types unique. This also avoids confusing what
type one is looking at.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2555>
