Commit Graph

1867 Commits

Author SHA1 Message Date
Neil Roberts
b14c2f799c cogl-journal: Defer expanding the vertices until uploading
When logging a quad we now only store the 2 vertices representing the
top left and bottom right of the quad. The color is only stored once
per entry. Once we come to upload the data we expand the 2 vertices
into four and copy the color to each vertex. We do this by mapping the
buffer and directly expanding into it. We have to copy the data before
we can render it anyway so it doesn't make much sense to expand the
vertices before uploading and this way should save some space in the
size of the journal. It also makes it slightly easier if we later want
to do pre-processing on the journal entries before uploading such as
doing software clipping.

The modelview matrix is now always copied to the journal entry whereas
before it would only be copied if we aren't doing software
transform. The journal entry struct always has the space for the
modelview matrix so hopefully it's only a small cost to copy the
matrix.

The transform for the four entries is now done using
cogl_matrix_transform_points which may be slightly faster than
transforming them each individually with a call to
cogl_matrix_transfom.
2010-12-03 17:16:57 +00:00
Neil Roberts
f8449582c8 Revert "cogl: Remove the generated array size for cogl_tex_coord_in"
This reverts commit 4cfe90bde2.

GLSL 1.00 on GLES doesn't support unsized arrays so the whole idea
can't work.

Conflicts:

	clutter/cogl/cogl/cogl-pipeline-glsl.c
2010-12-03 15:27:17 +00:00
Neil Roberts
f54cc7abd4 cogl-pipeline-glsl: Fix reusing shaders for shared ancestors
The check for whether we can reuse a program we've already generated
was only being done if the pipeline already had a
glsl_program_state. When there is no glsl_program_state it then looks
for the nearest ancestor it can share the program with. It then
wasn't checking whether that ancestor already had a GL program so it
would start generating the source again. It wouldn't however compile
that source again because _cogl_pipeline_backend_glsl_end does check
whether there is already a program. This patch moves the check until
after it has found the glsl_program_state, whether or not it was found
from an ancestor or as its own state.
2010-12-02 16:36:00 +00:00
Neil Roberts
6607306a2d cogl: Remove the generated array size for cogl_tex_coord_in
Under GLES2 we were defining the cogl_tex_coord_in varying as an array
with a size determined by the number of texture coordinate arrays
enabled whenever the program is used. This meant that we may have to
regenerate the shader with a different size if the shader is used with
more texture coord arrays later. However in OpenGL the equivalent
builtin varying gl_TexCoord is simply defined as:

varying vec4 gl_TexCoord[]; /* <-- no size */

GLSL is documented that if you declare an array with no size then you
can only access it with a constant index and the size of the array
will be determined by the highest index used. If you want to access it
with a non-constant expression you need to redeclare the array
yourself with a size.

We can replicate the same behaviour in our Cogl shaders by instead
declaring the cogl_tex_coord_in with no size. That way we don't have
to pass around the number of tex coord attributes enabled when we
flush a material. It also means that CoglShader can go back to
directly uploading the source string to GL when cogl_shader_source is
called so that we don't have to keep a copy of it around.

If the user wants to access cogl_tex_coord_in with a non-constant
index then they can simply redeclare the array themself. Hopefully
developers will expect to have to do this if they are accustomed to
the gl_TexCoord array.
2010-12-02 12:27:29 +00:00
Neil Roberts
d2326d497a cogl-pipeline: Fix comparing layer states for finding codgen authority
When compiling for GLES2, the codegen is affected by state other than
the layers. That means when we find an authority for the codegen state
we can't directly look at authority->n_layers to determine the number
of layers because it isn't necessarily the layer state authority. This
patch changes it to use cogl_pipeline_get_n_layers instead. Once we
have two authorities that differ in codegen state we then compare all
of the layers to decide if they would affect codegen. However it was
ignoring the fact that the authorities might also differ by the other
codegen state. This path also adds an extra check for whether
_cogl_pipeline_compare_differences contains any codegen bits other
than COGL_PIPELINE_STATE_LAYERS.
2010-12-01 15:48:37 +00:00
Neil Roberts
cf50b4f614 cogl-pipeline: Fix the codgen authority for texture target changes
When determining if a layer would require a different shader to be
generated it needs to check a certain set of state changes and it
needs to check whether the texture target is different. However it was
checking whether texture texture was different only if the other state
was also different which doesn't make any sense. It also only checked
the texture difference if that was the only state change which meant
that effectively the code was impossible to reach. Now it does the
texture target check indepent of the other state changes.
2010-12-01 14:39:28 +00:00
Neil Roberts
c492db38e0 cogl-pipeline-fixed: Use the correct state flag for combine constant
The fixed pipeline backend wasn't correctly flushing the combine
constant because it was using the wrong flag to determine if the
combine constant has changed since the last flushed material.
2010-11-30 22:28:38 +00:00
Neil Roberts
7ea97b3eb7 cogl-pipeline-opengl: Fix enabling previously disabled units
When enabling a unit that was disabled from a previous flush pipeline
it was forgetting to rebind the right texture unit so it wouldn't
work. This was causing the redhand to disappear when using the fixed
function backend in test-cogl-multitexture if anything else is added
to the scene.
2010-11-30 22:17:17 +00:00
Neil Roberts
7d840de18f cogl-pipeline: Add more ignored state changes for program generation
For shader generation backends we don't need to worry about changes to
the texture object and changing the user matrix. The missing user
matrix flag was causing test-cogl-multitexture to regenerate the
shader every frame.
2010-11-30 22:15:40 +00:00
Damien Lespiau
e905087e70 cogl: Revert "build: Remove unused variable"
Having ctx here produces a warning on GLES. However it's needed for Big
GL as we have at the top of the file:

 #ifdef HAVE_COGL_GL
 #define glClientActiveTexture ctx->drv.pf_glClientActiveTexture
 #endif

This reverts commit 27a3a2056a.
2010-11-30 16:39:00 +00:00
Damien Lespiau
8f6bf57dfb cogl: Fix unused variable warning with GLES2
This shader variable is only used with big GL.
2010-11-30 16:03:26 +00:00
Damien Lespiau
5eb800656d build: Remove unused variable
and be 100% warning free again.
2010-11-30 14:40:38 +00:00
Neil Roberts
3cad93b8a2 cogl-shader.c: Don't add the common boilerplate twice
In 6246c2bd6 I moved the code to add the boilerplate to a shader to a
separate function and also made it so that the common boilerplate is
added as a separate string to glShaderSource. However I didn't notice
that the #define for the vertex and fragment shaders already includes
the common part so it was being added twice. Mesa seems to accept this
but it was causing problems on the IMG driver because COGL_VERSION was
defined twice.
2010-11-29 13:43:09 +00:00
Neil Roberts
84dc0ad2eb cogl-pipeline-glsl: Use char* instead of GLchar*
It appears that some GLES2 headers don't define GLchar and it works
just as well to use a regular char.
2010-11-29 13:42:20 +00:00
Emmanuele Bassi
44678af8ab Merge remote branch 'elliot/cookbook-animations-scaling'
* elliot/cookbook-animations-scaling:
  cookbook: Add recipe for animated scaling of an actor
  cookbook: Add example of scaling a texture
  cookbook: Added "animated scaling" recipe skeleton
  cookbook: Added animated scaling example
2010-11-29 11:56:36 +00:00
Neil Roberts
2f95704d0a cogl_pipeline_equal: Fix the comparison for layer texture equality
Before commit 49898d43 CoglPipeline would compare whether a pipeline
layer's texture is equal by fetching the underlying GL handle. I
changed that so that it would only compare the CoglHandles because
that commit removes the GL handle texture overrides and sliced
textures instead log the underlying primitive texture. However I
forgot that the primitives don't always use
_cogl_texture_foreach_sub_texture_in_region when the quad fits within
the single texture so it won't use a texture override. This meant that
atlas textures and sub textures get logged with the atlas handle so
the comparison still needs to be done using the GL handles. It might
be nice to add a CoglTexture virtual to get the underlying primitive
texture instead to avoid having the pipeline poke around with GL
handles.
2010-11-26 15:49:31 +00:00
Robert Bragg
a57e6e7214 primitives: avoid leaking polygon override materials
If we have to make override changes to the user's source material to
handle cogl_polygon then we need to make sure we unref the override
material at the end.
2010-11-26 14:33:50 +00:00
Alexandre Quessy
c64e0103af Fixed "the the" repetitions in some doc strings
http://bugzilla.clutter-project.org/show_bug.cgi?id=2450
2010-11-25 18:18:51 +00:00
Robert Bragg
cf647e327f pipeline: Simplify layer change notifications to backend
Previously we used the layers->backend_priv[] members to determine when
to notify backends about layer changes, but it entirely up to the
backends if they want to associate private state with layers, even
though they may still be interested in layer change notifications (they
may associate layer related state with the owner pipeline).

We now make the observation that in
_cogl_pipeline_backend_layer_change_notify we should be able to assume
there can only be one backend currently associated with the layer
because we wouldn't allow changes to a layer with multiple dependants.
This means we can determine the backend to notify by looking at the
owner pipeline instead.
2010-11-25 14:41:25 +00:00
Neil Roberts
7474d320f6 cogl-context: Get rid of the features_cached member
The features_cached member of CoglContext is intended to mark when
we've calculated the features so that we know if they are ready in
cogl_get_features. However we always intialize the features while
creating the context so features_cached will never be FALSE so it's
not useful. We also had the odd behaviour that the COGL_DEBUG feature
overrides were only applied in the first call to
cogl_get_features. However there are other functions that use the
feature flags such as cogl_features_available that don't use this
function so in some cases the feature flags will be interpreted before
the overrides are applied. This patch makes it always initialize the
features and apply the overrides immediately while creating the
context. This fixes a problem with COGL_DEBUG=disable-arbfp where the
first material flushed is done before any call to cogl_get_features so
it may still use ARBfp.
2010-11-24 18:39:07 +00:00
Neil Roberts
bbf912b61d Lower the priority of the GLSL pipeline backend
Now that the GLSL backend can generate code it can effectively handle
any pipeline unless there is an ARBfp program. However with current
open source GL drivers the ARBfp compiler is more stable so it makes
sense to prefer ARBfp when possible. The GLSL backend is also lower
than the fixed function backend on the assumption that any driver that
supports GLSL will also support ARBfp so it's quicker to try the fixed
function backend next.
2010-11-24 18:06:44 +00:00
Neil Roberts
4d0b167be4 Add a COGL_DEBUG option to disable the fixed function pipeline backend
This adds COGL_DEBUG=disable-fixed to disable the fixed function
pipeline backend. This is needed to test the GLSL shader generation
because otherwise the fixed function backend would always override it.
2010-11-24 18:06:44 +00:00
Neil Roberts
54ac6b16bf Don't use the fixed function backend if there is a user program
The fixed function pipeline backend can't handle a user program so it
should bail out if one is given.
2010-11-24 18:06:44 +00:00
Neil Roberts
8083167be9 Add a warning message when no usable Cogl pipeline backend is found
If none of the pipeline backends can handle the state then it now
displays a warning so the developer has a chance to work out what's
going on.
2010-11-24 18:06:44 +00:00
Neil Roberts
cda5ea771b cogl-pipeline-glsl: Don't use gl_PointCoord on OpenGL
We don't want to use gl_PointCoord to implement point sprites on big
GL because in that case we already use glTexEnv(GL_COORD_REPLACE) to
replace the texture coords with the point sprite coords. Although GL
also supports the gl_PointCoord variable, it requires GLSL 1.2 which
would mean we would have to declare the GLSL version and check for
it. We continue to use gl_PointCoord for GLES2 because it has no
glTexEnv function.
2010-11-24 18:06:44 +00:00
Neil Roberts
c50cb72748 Remove the fragment shader generation from the GLES2 wrapper
The GLES2 wrapper no longer needs to generate any fragment shader
state because the GLSL pipeline backend will always give the wrapper a
custom fragment shader. This simplifies a lot of the state comparison
done by the wrapper. The fog generation is also removed even though
it's actually part of the vertex shader because only the fixed
function pipeline backend actually calls the fog functions so it would
be disabled when using any of the other backends anyway. We can fix
this when the two shader backends also start generating vertex
shaders.
2010-11-24 18:06:44 +00:00
Neil Roberts
9089d95b3f Disable the fixed function backend for GLES2
GLES2 doesn't really support fixed function so if we disable it we can
remove the fixed function wrappers from the GLES2 Cogl backend.
2010-11-24 18:06:44 +00:00
Neil Roberts
a86a1df372 cogl-pipeline-glsl: Generate the alpha test snippet under GLES2
GLES2 has no glAlphaFunc function so we need to simulate the behaviour
in the fragment shader. The alpha test function is simulated with an
if-statement and a discard statement. The reference value is stored as
a uniform.
2010-11-24 18:06:44 +00:00
Neil Roberts
0a314a752d cogl-pipeline: Add getters for the alpha test state
This adds two public functions:

 cogl_pipeline_get_alpha_test_function
   and
 cogl_pipeline_get_alpha_test_reference.
2010-11-24 18:06:44 +00:00
Neil Roberts
60000690e1 cogl: Separate out state flags for the alpha test func and ref
Previously the flag to mark the differences for the alpha test
function and reference value were conflated into one. However this is
awkward when generating shader code to simulate the alpha testing for
GLES 2 because in that case changing the function would need a
different program but changing the reference value just requires
updating a uniform. This patch makes the function and reference have
their own state flags.
2010-11-24 18:06:44 +00:00
Neil Roberts
38ad560b19 Remove the disabling of layer constants for GLES2
The GLSL shader generation supports layer combine constants so there's
no need to disable it for GLES2. It looks like there was also code for
it in the GLES2 wrapper so I'm not sure why it was disabled in the
first place.
2010-11-24 18:06:44 +00:00
Neil Roberts
7da3610e82 Generate GLSL in the CoglPipeline GLSL backend
The GLSL pipeline backend can now generate code to represent the
pipeline state in a similar way to the ARBfp backend. Most of the code
for this is taken from the GLES 2 wrapper.
2010-11-24 18:06:43 +00:00
Neil Roberts
46e59dc50f Move the cogl shader boilerplate setting code to a separate function
_cogl_shader_compile_real had some code to create a set of strings to
combine the boilerplate code with a shader before calling
glShaderSource. This has now been moved to its own internal function
so that it could be used from the GLSL pipeline backend as well.
2010-11-24 18:06:43 +00:00
Neil Roberts
0b28018873 Move need_texture_combine_separate to cogl-pipeline
need_texture_combine_separate is moved to cogl-pipeline.c and renamed
to _cogl_pipeline_need_texture_combine_separate. The function is
needed by both the ARBfp and GLSL codegen backends so it makes sense to
share it.
2010-11-24 18:06:43 +00:00
Neil Roberts
fac7338fdd Move find_arbfp_authority to cogl-pipeline.c
The code for finding the arbfp authority for a pipeline should be the
same as finding the GLSL authority. So that the code can be shared the
function has been moved to cogl-pipeline.c and renamed to
_cogl_pipeline_find_codegen_authority.
2010-11-24 18:06:43 +00:00
Neil Roberts
7379a5fc04 cogl: Rename arbfp_source_buffer to fragment_source_buffer
Only one of the material backends can be generating code at the same
time so it seems to make sense to share the same source buffer between
arbfp and glsl. The new name is fragment_source_buffer in case we
later want to create a new buffer for the vertex shader. That probably
couldn't share the same buffer because it will likely need to be
generated at the same time.
2010-11-24 18:06:43 +00:00
Evan Nemerson
3be05abf60 cogl: Include exported pacakges information in GIR
http://bugzilla.clutter-project.org/show_bug.cgi?id=2438
2010-11-24 17:18:17 +00:00
Owen W. Taylor
cda29a8011 Use FBOs and use cogl_read_pixels() to efficiently read partial textures
* cogl_texture_get_data() is converted to use
   _cogl_texture_foreach_sub_texture_in_region() to iterate
  through the underlying textures.

 * When we need to read only a portion of the underlying
   texture, we set up a FBO and use _cogl_read_pixels()
   to read the portion we need. This is enormously more
   efficient for reading a small portion of a large atlas
   texture.

 * The CoglAtlasTexture, CoglSubTexture, and CoglTexture2dSliced
   implementation of get_texture() are removed.

http://bugzilla.clutter-project.org/show_bug.cgi?id=2414
2010-11-24 15:56:35 +00:00
Neil Roberts
47ccbf472e cogl-framebuffer: Try to track format of the framebuffer
Previously in cogl_read_pixels we assume the format of the framebuffer
is always premultiplied because that is the most likely format with
the default Cogl blend mode. However when the framebuffer is bound to
a texture we should be able to make a better guess at the format
because we know the texture keeps track of the premult status. This
patch adds an internal format member to CoglFramebuffer. For onscreen
framebuffers we still assume it is RGBA_8888_PRE but for offscreen to
textures we copy the texture format. cogl_read_pixels uses this to
determine whether the data returned by glReadPixels will be
premultiplied.

http://bugzilla.clutter-project.org/show_bug.cgi?id=2414
2010-11-24 15:56:35 +00:00
Neil Roberts
8fd47276b7 cogl_read_pixels: Fix the format used in GLES2
When converting the data in cogl_read_pixels it was using bmp_format
instead of the format passed in to the function. bmp_format is the
same as the passed in format except that it always has the premult bit
set. Therefore the conversion would not handle premultiply correctly.

http://bugzilla.clutter-project.org/show_bug.cgi?id=2414
2010-11-24 15:56:35 +00:00
Neil Roberts
e41e5efac0 Add an internal _cogl_read_pixels_with_rowstride
This is the same as _cogl_read_pixels except that it takes a rowstride
parameter for the destination buffer. Under OpenGL setting the
rowstride this will end up calling GL_ROW_LENGTH so that the buffer
region can be directly written to. Under GLES GL_ROW_LENGTH is not
supported so it will use an intermediate buffer as it does if the
format is not GL_RGBA.

cogl_read_pixels now just calls the full version of the function with
the rowstride set to width*bpp.

http://bugzilla.clutter-project.org/show_bug.cgi?id=2414
2010-11-24 15:56:34 +00:00
Neil Roberts
05d8cc1223 Add an internal _cogl_offscreen_new_to_texture_full function
This function is the same as cogl_offscreen_new_to_texture but it
takes a level parameter and a set of flags so that FBOs can be used to
render to higher mipmap levels and to disable the depth and stencil
buffers. cogl_offscreen_new_to_texture now just calls the new function
with the level set to zero. This function could be useful in a few
places in Cogl where we want to use FBOs as an implementation detail
such as when copying between textures.

http://bugzilla.clutter-project.org/show_bug.cgi?id=2414
2010-11-24 15:56:34 +00:00
Neil Roberts
38929d55c9 cogl-texture-driver-gles: Fix image height for uploading 3D textures
When uploading a 3D texture with an awkward rowstride, on GLES Cogl
will copy the images to an intermediate buffer to pass to GL. However
it was using the wrong height when copying the data so it would end up
overflowing the buffer and crashing.
2010-11-23 14:12:17 +00:00
Emmanuele Bassi
8e8f5d5748 pipeline: Use WrapModeInternal in the Layer struct
Since we're using CoglPipelineWrapModeInternal in the internal API
anyway, and the compiler complains loudly when comparing two enumeration
types without casting, the PipelineLayer struct should store the
wrap modes using the internal enumeration.
2010-11-23 13:08:25 +00:00
Robert Bragg
0ec9e406ea clip-stack: combine modelview-projection in set_clip_planes
When using clip planes and we we have to project some vertices into
screen coordinates we used to transform those by the modelview and then
the projection matrix separately. Now we combine the modelview and
projection matrix and then use that to transform the vertices in one
step instead.
2010-11-23 12:50:29 +00:00
Robert Bragg
649aaffbe9 journal: remove possability of fallback layers
When logging quads in the journal it used to be possible to specify a
mask of fallback layers (layers where a default white texture should be
used in-place of the corresponding texture in the current source
pipeline). Since we now handle fallbacks for cogl_rectangle* primitives
when validating the pipeline up-front before logging in the journal we
no longer need the ability for the journal to apply fallbacks too.
2010-11-23 12:50:29 +00:00
Robert Bragg
e9e824fd86 matrix: Adds experimental cogl_matrix_{transform,project}_points
This add two new function that allows us to transform or project an
array of points instead of only transforming one point at a time. Recent
benchmarking has shown cogl_matrix_transform_point to be a bottleneck
sometimes, so this should allow us to reduce the overhead when
transforming lots of vertices at the same time, and also reduce the cost
of 3 component, non-projective transforms.

For now they are marked as experimental (you have to define
COGL_ENABLE_EXPERIMENTAL_API) because there is some concern that it
introduces some inconsistent naming. cogl_matrix_transform_point would
have to be renamed cogl_matrix_project_point to be consistent, but that
would be an API break.
2010-11-23 12:50:29 +00:00
Robert Bragg
56f36cf9c2 primitives: validate with _cogl_pipeline_foreach_layer
Switch _cogl_rectangles_with_multitexture_coords to using
_cogl_pipeline_foreach_layer to iterate the layers of a pipeline when
validating instead of iterating the pipelines internal list, which is
risky since any modifications to pipelines (even to an override pipeline
derived from the original), could potentially corrupt the list as it is
being iterated.
2010-11-23 12:50:28 +00:00
Robert Bragg
1a3f946cc6 cogl: remove WrapModeOverrides from FlushOptions
This removes the possibility to specify wrap mode overrides within a
CoglPipelineFlushOptions struct since the right way to handle these
overrides is by copying the user's material and making the changes to
that copy before flushing. All primitives code has already switched away
from using these wrap mode overrides so this patch just removes unused
code and types. It also remove the wrap_mode_overrides argument for
_cogl_journal_log_quad.
2010-11-23 12:50:28 +00:00
Emmanuele Bassi
ebdf112732 build: Add missing cogl-shader-boilerplate.h 2010-11-20 10:47:22 +00:00