The ClutterVirtualInputDevice API was fixed to use Clutter button
internal codes, whereas the mousekeys still uses evdev codes.
Change the mousekeys implementation to use the Clutter button code
instead to remain compatible with the ClutterVirtualInputDevice API.
Fixes: 24aef44b (Translate from button internal codes to evdev)
https://gitlab.gnome.org/GNOME/mutter/merge_requests/473
Since e3e933c4 a keyval can be temporarily remapped to an unused keycode. Due to
some limitations in XTestFakeKeyEvent, the remapping has to be done in the first
xkb group/layout. In case there are two or more keyboard layouts enabled and the
selected keyboard layout is not the first, clutter_keymap_x11_keycode_for_keyval
will fail to retrieve the correct keycode for a remapped keyval. Let's use the
reserved_keycodes map in order to retrieve the correct keycode if needed.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/443
The clamped rectangle currently could not fully contain the original fractional
rectangle because it doesn't take care of the fact that the new width should
consider the fact that flooring we'd translate the rectangle, and thus to cover
the same area we need to take care of it.
So, to properly compute the width and height, calculate x2 and y2 first and then
use this ceiled value to compute the actual width using the floored x1 and y1.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3
When we try to update the FB, we might face the case in which the effect target
framebuffer does not need any redraw, because it's already properly sized and
scaled, but the filter applied to the pipeline is not, because it has been
computed for a non-fractional scaling.
This is happens for example to clutter actors with a flattening effect (i.e.
override redirect mode set), that might have been generated properly for a
celied scaling level, but when we go fractional we need to ensure to use a
linear filter, as the 1:1 texel:pixel assumption is not true anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=765011https://gitlab.gnome.org/GNOME/mutter/merge_requests/3
At this level we use ceiled resource-scale when painting fractional value
When using fractional scaling we still need to create an integer-sized
texture and then we should paint it using a size which is proportional
to the real actor size ratio, and only paint a subsample of it, but this
doesn't seem to work properly with some weird scaling values.
Then, it's just better to draw the texture ceiled and then we scale it
down to match the proper actor scaling at paint level.
https://bugzilla.gnome.org/show_bug.cgi?id=765011https://gitlab.gnome.org/GNOME/mutter/merge_requests/3
When resource scale is set we need to generate a scaled PangoLayout (by adding
a new scale attribute, or adjusting the one we already have according the
resource scale), then it has to be painted with proper scaling matrix.
So everything that has to do with PangoLayout has to be in real coordinates,
then clutter logical coords multiplied by resource scaling.
While the actual size of the layout is the one of the PangoLayout divided by
resource scale.
We map the text positions to logical coords by default, while using
the pixel coordinates when painting.
We fall back to scale 1 when calculating preferred size if no scale is
known. The pango layout will not have set a layout scale attribute,
meaning it'll be 1, thus we should just assume the layout scale is 1 here.
Not doing so might result in the preferred size being 0x0 meaning the
actor won't be laid out properly.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/135https://bugzilla.gnome.org/show_bug.cgi?id=765011https://gitlab.gnome.org/GNOME/mutter/merge_requests/3
A clutter actor might be painted on a stage view with a view scale
other than 1. In this case, to show the content in full resolution, the
actor must use a higher resolution resource (e.g. texture), which will
be down scaled to the stage coordinate space, then scaled up again to
the stage view framebuffer scale.
Use a 'resource-scale' property to save information and notify when it
changes.
The resource scale is the ceiled value of the highest stage view scale a
actor is visible on. The value is ceiled because using a higher
resolution resource consistently results in better output quality. One
reason for this is that rendering is often not perfectly pixel aligned,
meaning even if we load a resource with a suitable size, due to us still
scaling ever so slightly, the quality is affected. Using a higher
resolution resource avoids this problem.
For situations inside clutter where the actual maximum view scale is
needed, a function _clutter_actor_get_real_resource_scale() is provided,
which returns the non-ceiled value.
Make sure we ignore resource scale computation requests during size
requests or allocation while ensure we've proper resource-scale on
pre-paint.
https://bugzilla.gnome.org/show_bug.cgi?id=765011https://gitlab.gnome.org/GNOME/mutter/merge_requests/3
This is an ABI break, hopefully an unimportant one since this signal/vmethod
is barely overridden.
The signal has been added an extra ClutterPaintVolume argument, and has been
given a boolean return value. The recursion to the parents has been taken
out of the default implementation and into the caller, using the returned
boolean parameter to control further propagation.
Passing the ClutterPaintVolume is easier on performance, as we don't need
setting this pointer as gobject data just to retrieve/unset it further
in propagation.
https://bugzilla.gnome.org/show_bug.cgi?id=782344
This basically reverts commit 54735dec, which tried to avoid the
GLib-defined types in favor the standard C ones. One exception to this
is the bool type, for which the commit introduces a new type CoglBool.
Let's just get rid of this type in favor of having consistency with the
GLib types. Note by the way that neither CoglBool nor gboolean (which
has a size of `int`) are completely compatible with bool (size `char`).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/321
Unfortunately, many parts of GNOME Shell and Mutter and Clutter
still use the implicit Cogl1 API. As such, it as a transition
between the old and new APIs, it is important to keep the
implicit draw framebuffer updated.
ClutterRootNode does not keep it updated though, and it might
lead to problems when rendering offscreen textures.
Fix that by pushing and popping the root node framebuffer on
pre- and post-draw, respectively.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/405
The ClutterRootNode paint node is theoretically the
top-most node of a paint nodes tree, except that we
are not in the point of having full rendering trees
in Clutter (all rendering performed by paint nodes
is still local and immediate).
When controlling the rendering tree, MetaShapedTexture
may need to paint into an offscreen framebuffer under
some circumstations.
Expose ClutterRootNode so that MetaShapedTexture can
use it to render to offscreen framebuffers.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/405
When painting to an offscreen framebuffer, MetaShapedTexture will
need to have full control of the painting routines of paint nodes.
As such, expose clutter_paint_node_paint() to allow forcing a
paint nodes paint from MetaShapedTexture.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/405
The multitexture API is not a shortcut for multiple calls
to the single texture API. It is meant to wrap calls to
cogl_framebuffer_draw_multitexture_rectangle(), which
uses the passed texture coordinates at different layers of
the pipeline.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/405
ClutterImage is a ClutterContent implementation that
has an internally managed CoglTexture. This texture
is recreated when new image data is set.
ClutterContent implementations may have control over
the allocation of the widgets they're attached to,
through CLUTTER_REQUEST_CONTENT_SIZE. On those cases,
if the new image data differs in size from the previous
data, it is important to notify those actors about the
size change. However, currently ClutterImage does not
notify them.
With the introduction of clutter_content_invalidate_size(),
it is possible to report the size changes to attached
actors.
Adapt ClutterImage to invalidate_size() when image data
has different sizes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/405
ClutterContent has the ability to dictate the layout of any
given actor, through the CLUTTER_REQUEST_CONTENT_SIZE request
mode.
However, there is no way for ClutterContent implementations
to notify their attached actors that the content size changed.
Add a new optional ClutterContent.invalidate_size() vfunc and
clutter_content_invalidate_size().
https://gitlab.gnome.org/GNOME/mutter/merge_requests/405
When profiling gnome-shell it was found that one of the main triggers
of `clutter_actor_queue_relayout` during animations was
`clutter_actor_set_margin_internal` continuously setting the same
zero margins. That's obviously pointless and also expensive. So just
avoid redundant margin changes.
This helps to further improve performance in:
https://gitlab.gnome.org/GNOME/mutter/issues/233,
https://gitlab.gnome.org/GNOME/gnome-shell/issues/349
This change previously landed as 59acb3895 and then got reverted because
it was found to make gnome-shell#517 worse. However that bug now has a
proper fix and this branch isn't really directly related so is being
reproposed...
Just move the minimal bits to this ClutterKeymapEvdev object. Much
of the functionality of a keymap is spread along ClutterSeatEvdev,
ClutterDeviceManagerEvdev and ClutterVirtualInputDevice. Future
refactors are due here.
Also, ideally keymaps are per-seat objects (at least keyboard state
is). We don't expose much info about seats altogether outside the
evdev device manager implementation. We just poke the main seat at
places, but eventually seats should be public.
We thus far have similar objects/code internal to backends. Expose the
minimum API necessary to cater for gnome-shell as a generic object.
So far only the X11 backend has an actual GObject for it, and was made
to be a subclass right away.
`distribute_natural_allocation` expects an input >= 0 of type `gint`. In
`get_preferred_size_for_opposite_orientation` it is used with an unchecked
variable `size` of type `gfloat`, which in case it is `Infinity`, gets
passed on in the macro `MAX (0, size)`. `Infinity` becomes `G_MININT`
when implicitly casted to `gint` in `distribute_natural_allocation`,
triggering the assertion `extra_space >= 0`.
The resulting warning in the log is counter intuitive and not very
helpful.
Use `float` in `distribute_natural_allocation` instead of `gint` and
assert on denormal values so we can more easily identify bugs.
Additionally change some types while at it and add a even more
expressive warning referencing the actor at one point.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/375
Commit 25f416c13d added additional compilation warnings, including
-Werror=return-type. There are several places where this results
in build failures if `g_assert_not_reached()` is disabled at compile
time and the compiler misses a return value.
https://gitlab.gnome.org/GNOME/mutter/issues/447
`ClutterOffscreenEffect` had been getting the wrong bounding box in the
case of clones and descendents of clones, causing visibly incorrect
clipping. This was due to `clutter_actor_get_paint_box` only ever being
given the source actor during a paint (which is correct) and not the clone.
Even if we weren't painting a clone but an offscreened descendent of a
clone (like in gnome-shell's desktop zoom), we would get the wrong result.
Fortunately we don't need to know the actual clone/actor being painted so
don't need to call the problematic `clutter_actor_get_paint_box` at all.
The solution is to only keep untransformed rendering in the FBO and leave
the correct transformation for later. The correct clone/actor's
transformation is already set for us as the current cogl modelview matrix
by `clutter_actor_paint`.
Bonus optimization: This all means we don't need to keep `last_matrix_drawn`
or force a full repaint every time some part of the transformation changes.
Because the FBO contents are no longer affected by transformations. As it
should be. In other words, offscreen-effected actors can now move around
on screen without themselves being repainted.
Special thanks to Mai Lavelle for identifying the cause of the problem.
Fixes:
https://bugzilla.gnome.org/show_bug.cgi?id=789050,
https://bugzilla.gnome.org/show_bug.cgi?id=659523#c9,
https://gitlab.gnome.org/GNOME/mutter/issues/196,
https://gitlab.gnome.org/GNOME/mutter/issues/282,
https://gitlab.gnome.org/GNOME/gnome-shell/issues/387,
https://launchpad.net/bugs/1767648,
https://launchpad.net/bugs/1779615
pkg-config files for mutter are generated using *_pkg_deps as requires, but
programs linked with libmutter doesn't need most of these private dependencies
which are only needed for building and linking mutter and its subprojects.
So list packages needed only by mutter itself inside *_pkg_private_deps and
don't expose such packages to pkg-config, but only use them at build time.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3955
Clutter exports symbols explicitly using `CLUTTER_EXPORT`, so everything should
be hidden by default, unless exposed.
Usage of `gnu_symbol_visibility` needs a version bump to meson 0.48.0
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3955
Soname of the libraries should be the major version number, while the version
triplet is currently used:
objdump -p libmutter-4.so.0.0.0 | grep SONAME
SONAME libmutter-4.so.0.0.0
While is expected to be only libmutter-4.so.0
Fix all shared libraries by setting valid version and soversion.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3955
The const qualifiers were implicitly discarded here and there. Avoid that
either by adding the constness, or casting it away when a const variable
is passed to a function that is defined as non-const but effectively
expect a const.
This will be used by the screen casting code to check whether it should
wait for a frame before reading cursor state, or send only the cursor
update, if no redraw is queued.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/357
Keycode lookup can fail for serveral reasons, e.g. if there is no combination of
modifiers and keycodes that can produce the target keysym with the current
keyboard layout.
In case the keycode lookup fails, remap temporarily the keysym to an unused
keycodes.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/109
I saw Meson fade from the sky
On the wind I heard a sigh
As snowflakes cover fallen Makefiles
I will say this last goodbye
Meson is now coming
So ends Autotools days
Future is now coming
And we must away
Over Python and without Bashisms
Through lands where never Meson touched
By silver streams that run down to the Sea
Under parsers, beneath old legacy
Over snow one winter’s morn
I turned at last to paths that lead home
And though where the road then takes me
I cannot tell
We came all this way
But now comes the day
To bid you farewell
Many places I have been
Many sorrows I have seen
But I don’t regret
Nor will I forget
All Makefiles that took that road with me
I bid you all a very fond farewell.
If a library is provided in the positional arguments, then meson
defaults to installing the .pc file in a 'pkgconfig' subdirectory
in the library's install location. We want the files in the regular
$libdir/pkgconfig rather than $libdir/mutter-$api/pkgconfig, so
specify the location explicitly in the parameters.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/382
Dependencies are added automatically, and we no longer get warnings
like:
clutter/clutter/meson.build:628: DEPRECATION: Library mutter-clutter-4
was passed to the "libraries" keyword argument of a previous call to
generate() method instead of first positional argument. Adding
mutter-clutter-4 to "Requires" field, but this is a deprecated behaviour
that will change in a future version of Meson. Please report the issue
if this warning cannot be avoided in your case.
This makes the build less verbose, as all .gir generation except for
clutters didn't pass --quiet to g-ir-scanner, making it output long
linking commands. Do this by adding a common introspection_args
variable.
While at it, put -U_GNU_SOURCE in there too, as it was always passed
everywhere as without it the scanner would log warnings.
The actor-shader-effect test actors are 50px wide, but we check the 51st
pixel. This went along undetected until "clutter: Avoid rounding
compensation when invalidating 2D actors" because the paint volumes were
made slightly bigger and the shaders paint all over them (I guess nobody
noticed those actors being actually ~52px wide).
Update the test to check the middle of the opposite edge, so we keep neatly
rounded numbers.
The test does a clutter_actor_set_scale_full() call that only updates
the scale center (i.e. no changes to scale-x/y), but expects to receive
notifications of actor scale changes.
Since "Revert "Revert "ClutterActor: Optimize away idempotent
scale/position updates"" these are optimized away, so just drop the
assumption.
This allows the redraw clip to be more constrained, so MetaCullable doesn't
end up rendering portions of window shadows, frame and background when a
window invalidates (part of) its contents.
https://bugzilla.gnome.org/show_bug.cgi?id=782344
Since now we don't set the swap throttled value based
on sync-to-vblank, we can effectively remove it from
Cogl. Throttling swap buffers in Cogl is as much a
historical artifact as sync-to-vblank. Furthermore,
it doesn't make sense to disable it on a compositor,
which is the case with the embedded Cogl.
In addition to that, the winsys vfunc for updating
whenever swap throttling changes could also be removed,
since swap throttling is always enabled now.
Removing it means less code, less branches when running,
and one less config option to deal with.
This also removes the micro-perf test, since it doesn't
make sense for the case where Cogl is embedded into the
compositor.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/191
Externally setting the sync-to-vblank setting was a feature
added as a workaround to old Intel and ATI graphic cards, and
is not needed anymore. Furthermore, it doesn't make sense to
change it on a compositor whatsoever.
This commit removes all the ways to externally change this
setting, as well as the now unused API.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/191
The xf86-input-wacom driver exports a property with the tool type as known by
the driver. This is a more reliable choice than guessing based on the device
name.
In the touchscreen case, we simply use is_touch_device() to guess which one of
the two options it is. Note that this code should never be hit anyway as we
would've succeeded earlier with a previous is_touch_device() call.
If we are lucky enough and the parent actor has the CLUTTER_ACTOR_NO_LAYOUT
flag, we would skip the relayout, but still redraw the parent actor in its
entirety.
In these cases, we can at least just redraw the area affected by the actor
being shown/hidden.
These calls don't actually affect the layout, but the paint order.
It seems safe to skip the full relayout/repaint of the parent actor,
and redraw only the area occupied by the affected child.
cogl_(fromebuffer)_set_viewport will implicitly cast away the fraction
of a floating point number, meaning if a coordinate calculation
resulted in just below the integer (which for example ~1.75 scaling on
a 1920x1080 did), we'd set a one pixel too narrow viewport. Fix this by
always rounding the floating point to the closest int before passing,
avoiding the precision loss.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
This is to ensure we're rendering a red damage area that actually
represents what is being damaged.
Fixes an always-fullscreen red damage on bare metal Wayland and
GNOME Shell.
This is useful to visualize which parts of the screen are being
damaged.
Add a new 'damage-region' value for CLUTTER_PAINT and paint the
damaged regions accordingly.
This commit includes following fixes for a few shell scripts:
1. Follow the best practice of quoting variables everywhere unless they
are used in places where word-splitting and globbing can never happen.
2. Replace `command` with $(command) because the latter is easier to use
and read.
3. Don't use "$@" in places expecting a string because it is an array
of strings instead of a single string.
Bash is not always installed in /bin and we should not hardcode the path
of it in source code which is expected to be built on many operating
systems and distributions.
Since most scripts using #!/bin/bash here doesn't have any bashism,
they can be converted to #!/bin/sh instead of using /usr/bin/env trick.
If a device (virtual or real) is removed while there are remaining
events queued for that device, the event loop may try to access the
event freed memory.
To avoid the issue, add a reference to the device when the event is
created or copied, and remove the reference once the device is freed.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/393
Mostly as expected, this port is also trivial. A small cleanup
accompanies this patch, making gen_texcoords_and_draw_cogl_rectangle()
receive the framebuffer that it should draw into.
Because ClutterText has a somewhat convoluted drawing routine,
replacing cogl_rectangle() here isn't as straightfoward as the
effects were.
A new CoglPipeline is now part of the ClutterText struct, and
is used to set the color of the background or the selection.
Another change is paint_selection() now receives a framebuffer
to draw into. The check for NULL framebuffer does not make
sense here, since there is always a draw framebuffer set
when in the drawing function. Because of that, the check is
now gone.
All those effects have the same basic pattern of setting a
color of a pipeline, then drawing a rect with cogl_rectangle().
Thus, replacing those was as easy as retrieving the draw
framebuffer and calling cogl_framebuffer_draw_rectangle() on it.
The default implementation of ClutterActor.pick() uses
cogl_rectangle() to draw the rectangle with the color
for picking.
Replace that by cogl_framebuffer_draw_rectangle(). A
static color pipeline had to be created in order to
hold the pick color.
Instead of using cogl_read_pixels(), which is deprecated and
uses the implicit framebuffer, pass the current CoglFramebuffer
and use cogl_framebuffer_read_pixels().
Another case of a simple and direct API translation. Instead of
using the deprecated cogl_clear() function, replace it by the
non-deprecated cogl_framebuffer_clear().
The events-touch test tested that clutter could properly process evdev
touch events. It used uinput to post evdev touch events, thus only ran
when runnig the test as root. Running as non-root it'd just silently
pass. As Clutter doesn't process evdev touch events anymore,
libinput does, so the test is fairly pointless, so remove it.
Pausing the master clock didn't actually pause it if there was already a
scheduled frame in progress. This is problematic if one actually expects
to see no new frame scheduling to happen after pausing, for example it
caused actor 'pre-paint' to be signalled on actors, but nothing was ever
painted.
Avoid this by destroying the master clock source when pausing, and then
recreating it when resuming.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/309
When profiling gnome-shell it was found that one of the main triggers
of `clutter_actor_queue_relayout` during animations was
`clutter_actor_set_margin_internal` continuously setting the same
zero margins. That's obviously pointless but also expensive since it
incurs full stage relayouts and reallocation. So just avoid redundant
margin changes.
Helps to further improve:
https://gitlab.gnome.org/GNOME/mutter/issues/233,
https://gitlab.gnome.org/GNOME/gnome-shell/issues/349
Almost a decade old, lets just assume it's there. This makes the button
on cally-atktext-example work again when building with meson, and
probably other things too.
If texture allocation fails (e.g. on an old GPU with size limit 2048)
then `update_fbo` would return `FALSE` but leaves `priv->offscreen`
as non-NULL. So the next paint will try to use the offscreen with a
`NULL` texture and crashes. The solution is simply to ensure that
`priv->offscreen` is NULL if there is no `priv->texture`, so the default
(non-offscreen) paint path gets used instead.
Bug reported and fix provided by Gert van de Kraats.
https://launchpad.net/bugs/1795774
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
Install include files in
$prefix/include/mutter-$apiversion/[clutter,cogl,...,meta]/, and
datafiles in /usr/share/mutter-$apiversion/.... We still would conflict
e.g. given that our gettext name is "mutter", and how keybindings are
installed, but it's a step in the right direction.
This allows input methods to inject key events with specific keyval/keycode,
those events will be flagged with CLUTTER_EVENT_FLAG_INPUT_METHOD so they
won't be processed by the IM again.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/531
If the user maps eg. Alt+F2 to a pad button, the MetaInputSettings will
send the full Alt press, F2 press, F2 release, Alt release sequence.
However the keycode corresponding to Alt is found in level 1, so the
Shift modifier gets unintendedly latched in addition to the Alt key
press/release pair.
We could probably improve keycode lookup heuristics so level=0 (and
no modifier latching) is preferred, but we can do without it altogether
for modifier keys.
If an effect is active and it overrides the paint volume, we should
always recompute the paint volume when requested and not use the
cache, since the paint volume override can change from call to
call depending on what phase of painting we are in. For instance,
if we are part way through painting effects and request the
paint volume, the paint volume should only go up to the current
effect, but in a later call to compute repaint regions, the
paint volume needs to expand to accomadate the effect.
This still involves a lot of recomputation in the case of effects -
in a later clutter version it would be worth adding an API to
allow effects to explicitly recompute and return a new the paint
volume up to the current effect as opposed to recomputing
the cached one.
Previously we were checking l->data != NULL || (l->data != NULL &&
l->data != priv->current_effect). This would continue the loop even
if l->data == priv->current_effect, since l->data != NULL, which was
not the intention of that loop.
We also don't need to check that l->data != NULL before checking if
it does not match the current_effect, since we already checked
that current_effect was non-NULL before entering the loop.
Some tablets have a noticable pointer jump on tip down/up, causing unintended
lines during drawing. Likewise, a button event may have an axis update that we
currently ignore. libinput provides tablet axis events only if no other state
changes, the client must instead get the current axis data from the tip/button
event. So let's do this, process the event axis data during tip/button as
well.
A libinput recording to reproduce is the 'dots.yml' in
https://gitlab.freedesktop.org/libinput/libinput/issues/128Fixes#289
Unfortunately XKeysymToKeycode() falls short in that it coalesces keysyms
into keycodes pertaining to the first level (i.e. lowercase). Add a
ClutterKeymapX11 method (much alike its GdkKeymap counterpart) to look up
all matches for the given keysym.
Two other helper methods have been added so the virtual device can fetch
the current keyboard group, and latch modifiers for key emission. Combining
all this, the virtual device is now able to handle keycodes in further
levels.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/135
A just focused ClutterInputFocus must set itself up correctly on
all situations. Refactor this into a function, so it can be used
for the case where a ClutterText gets editable while focused.
`ClutterText` painting for editable single_line_mode actors like `StEntry`
is always clipped by:
`cogl_framebuffer_push_rectangle_clip (fb, 0, 0, alloc_width, alloc_height)`
So it's difficult to get the rectangle wrong. However in cases where the
target framebuffer has changed (`cogl_push_framebuffer`) such as when
updating `ClutterOffscreenEffect` we had the wrong old value of `fb`. And
so would be clipping the wrong framebuffer, effectively not clipping at all.
Sending button events to a ClutterVirtualInputDevice, the API expects
button codes to be of the internal clutter type. The evdev
implementation incorrectly assumed it was already prepared evdev event
codes, which was not the case. Fix the evdev implementation to translate
from the internal representation to evdev before passing it along to
ClutterSeatEvdev.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/190
Children added to a parent after that parent (or its ancestors)
have already been cloned now inherit the clone branch depth of
the parent. Otherwise `clutter_actor_is_in_clone_paint` on the child
could return FALSE when it should have been returning TRUE.
The function is intentionally provided as macro to not require a
cast. Recently the macro was improved to check that the passed in
pointer matches the free function, so the cast to GDestroyNotify
is now even harmful.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/176
`modelview` is uninitialized and the `apply` function just multiplies it.
What we really want is to initialize `modelview` so replace `apply` with
`get`.
Who knows what bugs this may have caused...
Treat the main seat as other seats, so we don't have to handle it differently
in specific places. This was already the case before when a real device
was plugged before the startup, but not applied when hotplugging a device.
When no input devices are available on startup the device manager might be fast
enough to be constructed so that no default stage is set yet, and thus when
main seat virtual devices are created they won't have a proper stage set.
If then we plug a real device, the events that an input manager could generate
won't be associated to any stage and thus won't be processed.
We need then ensure that when we update the stage for the device manager we
(un)associate it also to the main seat devices.
In devices such as ARM boards there could be no input devices connected on
startup, leading to a crash when we try to process artificial events that
could be queued (as gnome-shell does when syncing pointer).
Those events still should refer to a device and, in case we don't have one
provided by libinput we should still return the core devices defined in the
main seat.
The fix is twofold. On one hand, it makes sense not to relate IM (nor
any other) generated events to a HW device. On the other hand, if we
are unfortunate that an IM event is in flight when we are switching
to another TTY, it may arrive at a time when the source device is no
longer existent.
Mark CAPS lock as a modifier (as it should) so that when using XKB
options to change the default behaviour of CAPS lock, the new assigned
key can by used as a sticky key as well.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/112
Input method can inject key events, which leads to multiple reported key
press/release events for a single user action.
Ignore those events as this confuses keyboard accessibility.
And make the ClutterText-level properties independent from the input
focus, as those properties can be set anytime, not just when the
ClutterText actor is focused.
https://gitlab.gnome.org/GNOME/mutter/issues/66Closes: #66
We can save an unnecessary relayout if the required size to fully draw the text
is equal to the currently allocated size after the underlying text buffer or
attributes that only affect the PangoLayout have changed.
Actor keybindings were dispatched in an earlier return path, which means
the IM doesn't get to see certain key events. Flip the order around so the
IM has an opportunity to handle all keypresses.
https://gitlab.gnome.org/GNOME/mutter/issues/65Closes: #65
