Some DRM drivers have added a consistent set of properties that
allow compensating for the overscan that some TVs do, without the
user being able to disable.
There is copy&pasted code in set_scroll_button, which is apparently
wrong, because it is trying to set scroll method instead of the scroll
button...
https://bugzilla.gnome.org/show_bug.cgi?id=747967
On X11, calling this function on meta_display_handle_events() will not catch
mouse events happening over clients, so poke directly in the backend for
XI_DeviceChanged events, which mutter will get on device switches.
The code has been slightly refactored so we deal with XIEvents at a single
handle_input_event() function.
https://bugzilla.gnome.org/show_bug.cgi?id=712775
This just exposes the type and the singleton getter necessary to make
it available to introspection. We'll expose more functionality as it
becomes needed.
https://bugzilla.gnome.org/show_bug.cgi?id=743745
This goes through modifying XI2 device properties, either common ones (eg.
set on every device) or those specific to the libinput X11 driver. Keyboard
repeat/rate are set through core and XKB APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=739397
This patch removes the X11 specific code from MetaBarrier and creates an
abstraction layer MetaBarrierImpl. The existing X11 implementation is
moved to a new GObject MetaBarrierImplX11 implementing the abstract
interface MetaBarrierImpl which is instantiated by MetaBarrier when
supported.
While at it, move it to backends/ and properly name the files.
https://bugzilla.gnome.org/show_bug.cgi?id=706655
EDID parsing has been refactored to a common meta_output_parse_edid()
function, which ensures the extracted information is the same on both KMS
and X11 backend, so it can be used consistently on eg. settings values.
https://bugzilla.gnome.org/show_bug.cgi?id=742882
This reverts commit 47e339b46e. The
approach that was used to reduce the amount of work we do on RR events
to the necessary minimum is flawed. It assumes that, when the first
event we see where the retrieved XRRScreenResources.timestamp is
bigger than the previous, we already have all the data we need to
rebuild our view of the world.
That isn't true however, because the X server sends
RRScreenChangeNotify events for every step of the configuration
change, i.e. it lacks an atomic reconfiguration API. In particular, if
the X screen size is one of the changes, when we rebuild our state and
emit monitors-changed, the X screen size might still be the previous
one and since we stop updating ourselves until another reconfiguration
happens (noticed by looking at XRRScreenResources.timestamp) we end up
with the wrong idea of the X screen size.
https://bugzilla.gnome.org/show_bug.cgi?id=738630
This optimization breaks our use of XRRScreenResources' timestamps to
detect hotplugs in case one of the outputs is disconnected and the
remaining ones don't need any mode, position or transform adjustments.
In that scenario, when applying the new configuration, we resize the X
screen but never call XRRSetCrtcConfig() and since XRRSetScreenSize()
doesn't take a timestamp and the X server doesn't update its last set
timestamp, when we next get a RRScreenChangeNotify and update
ourselves, XRRScreenResources.timestamp will still be smaller than
XRRScreenResources.configTimestamp which makes us think we're seeing a
new hotplug. We just don't enter an endless loop because the screen
size that we keep applying is always the same and the X server
short-circuits and stops sending us RRScreenChangeNotifys.
Always calling XRRSetCrtcConfig() ensures that the last set timestamp
will be bigger than configTimestamp in the next event and thus making
us trigger the monitors-changed signal properly.
Note that the X server already does basically the same checks that
we're removing here, so doing this shouldn't be a significant
efficiency loss. See
http://cgit.freedesktop.org/xorg/xserver/tree/randr/rrcrtc.c?h=server-1.16-branch#n539
In recent versions of the QXL driver, it may set "suggested X|Y" connector
properties. These properties are used to indicate the position at which
multiple displays should be aligned. If all outputs have a suggested position,
the displays are arranged according to these positions, otherwise we fall back
to the default configuration.
At the moment, we trust that the driver has chosen sane values for the
suggested position.
The X server sends several RRScreenChangeNotify events in a burst when
something happens which, currently, causes us to rebuild our view of
the world as many times and notify the upper layers about it which
causes a lot of bogus repeated work like rebuilding background actors.
We can avoid this extra work by looking at the timestamp in the
XRRScreenResources struct which is updated when an X client (including
us!) last changed something and comparing it with the previous
timestamp.
https://bugzilla.gnome.org/show_bug.cgi?id=738630
meta_monitor_config_match_current() only matches the number of outputs
and if the output connector, vendor, product and serial match.
In the X backend, this means that we can't use it to bypass doing any
work because it won't detect cases where we actually want to update
ourselves like e.g. an output being turned off either by us or by
another X client (e.g. xrandr).
In the native backend, unlike the xrandr backend, we only get called
on real hotplug events and thus should always trigger the common
hotplug code to (possibly) apply a new mode so the check is pointless
anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=738630
In randr events, configTimestamp can be considered the hotplug time,
i.e. whenever the server notices hardware changes, this value will be
updated.
Having that in mind, we can re-work the logic to make it clearer.
There are no semantic changes.
The code here was a bit messy with the addition of
hotplug_mode_update, and the comments were a bit confusing and
inaccurate. Clean it up and comment it a bit better to make the flow and
intention more clear.
The X server applies a default keymap to hotplugged keyboard
devices. To enforce our current settings we must re-upload the keymap
when a new keyboard shows up.
Note that setting the VCK keymap causes the server to propagate it
to all slave keyboard devices.
https://bugzilla.gnome.org/show_bug.cgi?id=737673
In the case of a nested Wayland compositor inside an X session,
Clutter is managing the toplevel window size, so don't call
XResizeWindow on it - this will confuse Clutter and get the size
and the hints out of sync on the toplevel window.
https://bugzilla.gnome.org/show_bug.cgi?id=736279
RandR's QueryOutputProperty request makes the incredible decision of
throwing a BadName if you pass a property that doesn't exist, which
means that trying to check if a property exists is a royal pain when
using Xlib.
XCB's interface is much more friendly about errors and not having global
state and things like that, so use that instead to query our backlight
property.
If the property doesn't exist, a BadName error will be generated. This
is a terrible API, but it's what we're stuck with. Use
RRGetOutputProperty instead.
meta_backend_get_keymap is supposed to return a static keymap, not a new
one every time. Cache it internally. We don't update it when the keymap
changes on the server, but we'll do this soon.
This allows creating the stage much earlier than it otherwise would have
been. Our initialization sequence has always been a bit haphazard, with
first the MetaBackend created, then the MetaDisplay, and inside of that,
the MetaScreen and MetaCompositor.
Refactor this out so that the MetaBackend creates the Clutter
stage. Besides the clarity of early initialization, we now have much
easier access to the stage, allowing us to use it for things such as
key focus and beyond.
These methods allow us to set and get xkbcommon keymaps as well as
locking a specific layout in a layout group.
With this, we introduce dependencies on xkeyboard-config, xkbfile,
xkbcommon-x11 and a libX11 new enough to have xcb support.
https://bugzilla.gnome.org/show_bug.cgi?id=734301
Sometimes we can get a host event without having the display up and
running yet. Just don't pass it to the compositor in that case, since it
won't be possible for it to have any event that matters.
This reverts commit 3b85e4b2b9.
This breaks touch support; reverting would break wayland
(is what this patch tried to fix; we should find a better solution
that works on both).
When a touch sequence is passively grabbed and later rejected, events
will be replayed on the next client in propagation order, although those
events (either transformed to pointer events or not) will contain the
original timestamps, this will make grabs fail with InvalidTime if triggered
from the replayed ButtonPress/TouchBegin handler.
In order to work around this, store the most recent event time (presumably
gotten from the XI_TouchEnd caused by the passive grab being rejected), and
use that time on the events being replayed afterwards and grabs, so we don't
possibly fail with InvalidTime if those events result in a compositor grab.
The output_id is more of an opaque identifier for the monitor, based on
its underlying ID from the windowing system. Since we also use the term
"output_id" for the output's index, rename our use of the opaque cookie
"output_id" to "winsys_id".
This makes Alt+F7 / Alt+F8 work respectively under X11 nested mode.
For the native backend implementation, we'll need a special Clutter
function, so don't implement that for now.
When we click on a window with a passive grab, then the event_x
and event_y will be relative to that window, instead of relative to
the stage, which means that picking will be wrong.
Forcibly using root_x / root_y breaks nested mode. Nested mode is
a testing mode that should be replaced by a DRI3-enabled Xephyr,
though. It's getting too hairy to support properly.
