Commit Graph

66 Commits

Author SHA1 Message Date
Neil Roberts
fb7f1a7fd6 Split the wrap mode of _cogl_texture_set_wrap_mode into three
GL supports setting different wrap modes for the s, t and r
coordinates so we should design the backend interface to support that
also. The r coordinate is not currently used by any of the backends
but we might as well have it to make life easier if we ever add
support for 3D textures.

http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-12 15:44:23 +01:00
Owen W. Taylor
e1aec63980 Set pixel store parameters before calling glGetTexImage
We need to set up the rowstride and alignment properly in
CoglTexture2D before reading texture data.

http://bugzilla.openedhand.com/show_bug.cgi?id=2036

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-03-19 10:21:34 +00:00
Neil Roberts
9fc9aa562e cogl-texture-2d: Determine format before checking texture support
When entering cogl_texture_2d_new_from_bitmap the internal format can
be COGL_PIXEL_FORMAT_ANY. This was causing _cogl_texture_2d_can_create
to use an invalid GL format type. Mesa apparently ignores this but it
was causing errors when Cogl is compiled with debugging under NVidia.

http://bugzilla.openedhand.com/show_bug.cgi?id=2026
2010-03-15 16:09:52 +00:00
Owen W. Taylor
770ca1311d Fix checks for out-of-bounds coordinates and repeats
Add a return result from CoglTexture.transform_quad_coords_to_gl(),
so that we can properly determine the nature of repeats in
the face of GL_TEXTURE_RECTANGLE_ARB, where the returned
coordinates are not normalized.

The comment "We also work out whether any of the texture
coordinates are outside the range [0.0,1.0]. We need to do
this after calling transform_coords_to_gl in case the texture
backend is munging the coordinates (such as in the sub texture
backend)." is disregarded and removed, since it's actually
the virtual coordinates that determine whether we repeat,
not the GL coordinates.

Warnings about disregarded layers are used in all cases where
applicable, including for subtextures.

http://bugzilla.openedhand.com/show_bug.cgi?id=2016

Signed-off-by: Neil Roberts <neil@linux.intel.com>
2010-03-15 16:09:41 +00:00
Owen W. Taylor
d29b3c8f81 Fall back in _cogl_texture_2d_new_from_bitmap()
Just like _cogl_texture_2d_new_with_size(),
_cogl_texture_2d_new_from_bitmap() needs to check if an unsliced
texture can be created at the given size, or if hardware
limitations prevent this.

http://bugzilla.openedhand.com/show_bug.cgi?id=2014

Signed-off-by: Neil Roberts <neil@linux.intel.com>
2010-03-02 11:48:15 +00:00
Emmanuele Bassi
72f4ddf532 Remove mentions of the FSF address
Since using addresses that might change is something that finally
the FSF acknowledge as a plausible scenario (after changing address
twice), the license blurb in the source files should use the URI
for getting the license in case the library did not come with it.

Not that URIs cannot possibly change, but at least it's easier to
set up a redirection at the same place.

As a side note: this commit closes the oldes bug in Clutter's bug
report tool.

http://bugzilla.openedhand.com/show_bug.cgi?id=521
2010-03-01 12:56:10 +00:00
Robert Bragg
ba4b00be42 cogl: remove redundant _cogl_journal_flush prototype
There was a redundant _cogl_journal_flush function prototype in
cogl-primitives.h
2010-02-12 14:05:01 +00:00
Robert Bragg
0f5f4e8645 cogl: improves header and coding style consistency
We've had complaints that our Cogl code/headers are a bit "special" so
this is a first pass at tidying things up by giving them some
consistency. These changes are all consistent with how new code in Cogl
is being written, but the style isn't consistently applied across all
code yet.

There are two parts to this patch; but since each one required a large
amount of effort to maintain tidy indenting it made sense to combine the
changes to reduce the time spent re indenting the same lines.

The first change is to use a consistent style for declaring function
prototypes in headers. Cogl headers now consistently use this style for
prototypes:

 return_type
 cogl_function_name (CoglType arg0,
                     CoglType arg1);

Not everyone likes this style, but it seems that most of the currently
active Cogl developers agree on it.

The second change is to constrain the use of redundant glib data types
in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all
been replaced with int, unsigned int, float, long, unsigned long and char
respectively. When talking about pixel data; use of guchar has been
replaced with guint8, otherwise unsigned char can be used.

The glib types that we continue to use for portability are gboolean,
gint{8,16,32,64}, guint{8,16,32,64} and gsize.

The general intention is that Cogl should look palatable to the widest
range of C programmers including those outside the Gnome community so
- especially for the public API - we want to minimize the number of
foreign looking typedefs.
2010-02-12 14:05:00 +00:00
Neil Roberts
f74f4bdc2b cogl: Add a fallback for when the signbit macro is missing
The signbit macro is defined in C99 so it should be available but some
versions of GCC don't appear to define it by default. If it's not
available we can use a hack to test the bit directly.
2010-02-11 15:59:53 +00:00
Neil Roberts
2938ae0475 cogl-texture-2d: Use _cogl_texture_driver_gen to generate the GL tex
_cogl_texture_driver_gen is needed to set the texture minification
mode to Cogl's default of GL_LINEAR. There was also a line to set this
in _cogl_texture_2d_new_with_size but it wasn't working because it was
called *before* the texture was bound. If the texture was later
rendered with the default material it then it would end up with GL's
default mipmap filtering mode but without mipmaps so it would render
white squares instead.
2010-02-09 12:21:10 +00:00
Damien Lespiau
dbef77cd8b cogl: new textures sould have GL_TEXTURE_MIN_FILTER set to GL_LINEAR
The only way the user has to set the mipmap filters is through the
material/layer API. This API defaults to GL_LINEAR/GL_LINEAR for the max
and min filters. With the main use case of cogl being 2D interfaces, it
makes sense do default to GL_LINEAR for the min filter.

When creating new textures, we did not set any filter on them, using
OpenGL defaults': GL_NEAREST_MIPMAP_LINEAR for the min filter and
GL_LINEAR for the max filter. This will make the driver allocate memory
for the mipmap tree, memory that will not be used in the nominal case
(as the material API defaults to GL_LINEAR).

This patch tries to ensure that the min filter is set to GL_LINEAR
before any glTexImage*() call is done on the texture by setting the
filter when generating new OpenGL handles.
2010-02-08 17:14:49 +00:00
Neil Roberts
e20c98e548 cogl: Let GL do the format conversion when uploading texture data
Cogl accepts a pixel format for both the data in memory and the
internal format to be used for the texture. If they do not match then
it would convert them using the CoglBitmap functions before uploading
the data. However, GL also lets you specify both formats so it makes
more sense to let GL do the conversion. The driver may need the
texture in a specific format so it may end up being converted anyway.

The cogl_texture_upload_data functions have been removed and replaced
with a single function to prepare the bitmap. This will only do the
premultiplication conversion because that is the only part that GL
can't do directly.
2010-02-01 13:27:34 +00:00
Neil Roberts
a6f061e41f cogl: Do the premult conversion in-place rather than copying to a new buffer
The premult part of _cogl_convert_premult has now been split out as
_cogl_convert_premult_status. _cogl_convert_premult has been renamed
to _cogl_convert_format to make it less confusing. The premult
conversion is now done in-place instead of copying the
buffer. Previously it was copying the buffer once for the format
conversion and then copying it again for the premult conversion. The
premult conversion never changes the size of the buffer so it's quite
easy to do in place. We can also use the separated out function
independently.
2010-02-01 13:27:34 +00:00
Neil Roberts
ae7825275e cogl: Make CoglSubTexture only work for quad rendering
The sub texture backend doesn't work well as a completely general
texture backend because for example when rendering with cogl_polygon
it needs to be able to tranform arbitrary texture coordinates without
reference to the other coordintes. This can't be done when the texture
coordinates are a multiple of one because sometimes the coordinate
should represent the left or top edge and sometimes it should
represent the bottom or top edge. For example if the s coordinates are
0 and 1 then 1 represents the right edge but if they are 1 and 2 then
1 represents the left edge.

Instead the sub-textures are now documented not to support coordinates
outside the range [0,1]. The coordinates for the sub-region are now
represented as integers as this helps avoid rounding issues. The
region can no longer be a super-region of the texture as this
simplifies the code quite a lot.

There are two new texture virtual functions:

transform_quad_coords_to_gl - This transforms two pairs of coordinates
     representing a quad. It will return FALSE if the coordinates can
     not be transformed. The sub texture backend uses this to detect
     coordinates that require repeating which causes cogl-primitives
     to use manual repeating.

ensure_non_quad_rendering - This is used in cogl_polygon and
     cogl_vertex_buffer to inform the texture backend that
     transform_quad_to_gl is going to be used. The atlas backend
     migrates the texture out of the atlas when it hits this.
2010-01-18 09:22:04 +00:00
Neil Roberts
f1c289378e cogl-texture-2d: Fix the coordinate wrapping for negative coordinates
The formula to wrap the coordinates to the [0,1] range was broken when
the coordinates were negative.
2010-01-15 12:16:06 +00:00
Neil Roberts
05d42ed390 cogl: Add a CoglTexture2D backend
This is an optimised version of CoglTexture2DSliced that always deals
with a single texture and always uses the GL_TEXTURE_2D
target. cogl_texture_new_from_bitmap now tries to use this backend
first. If it can't create a texture with that size then it falls back
the sliced backend.

cogl_texture_upload_data_prepare has been split into two functions
because the sliced backend needs to know the real internal format
before the conversion is performed. Otherwise the converted bitmap
will be wasted if the backend can't support the size.
2009-12-02 22:03:27 +00:00