Compensate the protocol statelessness with our ClutterInputFocus
statefulness. This becomes more necessary now, since sending
consecutive .done() events is now considered acceptable behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2365>
Currently, meta_xwayland_shutdown_dnd() is called from the handler
on_x11_display_closing() triggered from the signal "x11-display-closing"
hooked up from meta_xwayland_init_display().
Once the signal has been triggered, on_x11_display_closing() removes the
signal handler, disconnecting from the signal.
As meta_xwayland_init_display() is called from meta_display_new() which
is issued only once, the signal handler is not restored again.
As a result, meta_xwayland_shutdown_dnd() is not called anymore after
Xwayland has been restarted, but meta_xwayland_init_dnd() will check and
assert that the manager's DND object is NULL.
Basically, restarting Xwayland more that once will trigger an assertion
failure in mutter. That's even more of a problem with autoclose-xwayland
where Xwayland is expected to terminate when there is no meaningful X11
client remaining, which can happen multiple times during the lifetime
of a user session.
To make sure that meta_xwayland_init_display() is called for every new
instance of Xwayland, simply keep the signal hooked in place by not
disconnecting it when triggered.
This reverts commit 9a10b8ff94.
Even though, originally, this issue was first introduced with commit
b4fe1fdd95 ("xwayland: Make setup/teardown
a bit more symmetrical") which didn't actually kept 'x11-display-setup'
and 'x11-display-closing' connected.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2168
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2339>
Before scanning out the surface of a native client we have
to check the following attributes that influence the
relationship between buffer and the defined result on screen:
- buffer scale
- buffer transform
- viewport
In the future we can loose these checks again in cases where the
display hardware supports the required operations (scaling, cropping
and rotating).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2276>
Prior to 67033b0a mutter was accidentally including sizes for
configurations that were just focus state changes. This was not leading
to any known problems on the client side, but it was causing issues in
mutter itself when detecting whether a resize originated from the client
or the server.
Not including sizes in focus change configurations anymore however
revealed a bug in gtk. It was storing the window size when in a fixed
size mode (tiled/maximized/fullscreen), but not on any other server side
resizes. It was then restoring this stored size whenever there was a new
configuration without a size while in floating mode, i.e. the focus
change configurations generated by mutter after 67033b0a.
This change now addresses the issue 67033b0a was fixing in a way that
restores the previous behavior of always including the size whenever
sending a configuration.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2091
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2238>
In some configurations (e.g. NVIDIA driver 470) Xwayland may use DMA
buffer for passing buffers around. When this is done, we might attempt
to scanout these buffers when they are fullscreen, and to do so we
import them using gbm.
However, for the mentioned configuration, there is no gbm device
available for importing. This was not handled, and resulted in a crash;
avoid this crash by checking whether we have a gbm device and fail
gracefully if we don't.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2098
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2318>
This aims to replace the x,y arguments in wl_surface.attach(); meaning
it can be used more sanely together with EGL, and at all when using
Vulkan.
The most common use case for the offset is setting the hotspot of DND
surfaces.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1905>
This implements the new 'bounds' event that is part of the xdg_toplevel
interface in the xdg-shell protocol. It aims to let clients create
"good" default window sizes that depends on e.g. the resolution of the
monitor the window will be mapped on, whether there are panels taking up
space, and things like that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2167>
We'd guess the initial monitor before it was actually calculated by
looking at the initial geometry. For Wayland windows, this geometry was
always 0x0+0+0, thus the selected monitor was always the primary one.
This is problematic if we want to provide initial more likely
configurations to Wayland clients. While we're not doing that yet, it'll
be added later, and this is in preparation for that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2167>
Since the introduction of ClutterGrabs, MetaDnd now no longer gets
notified about input events on the stage during grabs (for example while
the alt-tab popup is shown) and thus can't move the grab feedback actor
anymore.
To fix this, forward events to MetaDnD directly from
meta_display_handle_event() when a ClutterGrab is in effect.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2308>
The XDG activation support was missing interoperability with other
startup sequences, notably those coming from other means than XDG
activation.
In order to play nice with X11 startup sequence IDs, we not just
have to check for the startup ID being in the general pool, but
we also need to fallback into X11-style timestamp comparison so the
window ends up properly focused.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2314>
When a drag and drop occurs from an X11 client to a Wayland native
client, mutter uses an internal X11 window as a peer for the DnD drop
site.
That internal X11 window is moved and resized to match the Wayland
native windows as the drag destination moves.
When moving from one Wayland native window to another Wayland native
window, the same X11 window is used, and as a result no DND enter/leave
events is emitted.
In that case, the drop may occur on the wrong Wayland native window,
because no new XdndEnter/XdndLeave event were emitted.
To avoid that issue, use a pair of X11 windows instead of just one and
alternate between the two when repicking a new drop surface, so that
moving from a Wayland surface to another will always generate the
expected enter/leave events that we rely on.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2136
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2305>
If we happen to handle a CLUTTER_TOUCH_BEGIN without a corresponding
CLUTTER_TOUCH_END at MetaWaylandTouch, we would still attempt to
reuse the older MetaWaylandTouchInfo, resulting in an assert triggered
as there is a stale touch reference on the previous surface.
Warn in place and create a new touch info struct to still fix the
broken surface accounting, instead of finding out the hard
way after the surface is destroyed. The assert is preserved to ensure
the accounting does not sneakily break anymore/further.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/584
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2251>
The `ensure_x11_unix_perms` function tries to detect systems on which
/tmp/.X11-unix is owned by neither root nor ourselves because in that
case the owner can take over the socket we create (symlink races are
fixed in linux 800179c9b8a1e796e441674776d11cd4c05d61d7). This should
not be possible in the first place and systems should come with some way
to ensure that's the case (systemd-tmpfiles, polyinstantiationm …). That
check however only works if we see the root user namespace which might
not be the case when running in e.g. toolbx.
This change relaxes the requirements such that in the root user
namespace we detect and abort if a vulnerable system is detected but
unconditionally run in toolbx.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2261>
Wayland event processing and WM operations are themselves outside the
ClutterGrab loop so far. Until this is sorted out, these pieces of
event handling have got to learn to stay aside while there is a
ClutterGrab going on.
So, synchronize foci and other state when grabs come in or out, and
make it sure that Wayland event processing does not happen while
grabs happen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2099>
The experimental feature "autoclose-xwayland" requires a couple of
prerequisites:
1. Be able to (re)start Xwayland on demand, i.e. with systemd
2. Xwayland must support the terminate delay
Add a warning message if "autoclose-xwayland" was requested but any of
those prerequisites is not met.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2258>
Since commit 226afa24a - "Use Xwayland auto-terminate feature", the
callback function shutdown_xwayland_cb() does not check for the
autoclose-xwayland experimental feature anymore.
As a result, when running nested or outside of systemd,
gnome-shell/mutter would quit after 10 seconds unless some X11 window
was mapped.
But now that we rely on Xwayland's own terminate feature, there really is
no need to use any xserver timeout function anymore.
We do not need to keep track of X11 windows being created or unmapped, as
again, Xwayland does all that for us at the client level.
Remove all this code that we do not need anymore.
fixes: 226afa24a - Use Xwayland auto-terminate feature
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2258>
When using Xwayland-on-demand (default), if the (experimental) autoclose
features is enabled, we can rely on Xwayland's auto-terminate feature
instead of explicitly killing the Xwayland process.
With it, gone is the mechanism that was added to check the X11 clients
connected and their executable to check whether we can (safely) kill
Xwayland.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1794>
The connection to the Xserver for the X11 window manager part of mutter
even on Wayland may prevent the Xserver from shutting down.
Currently, what mutter does is to check the X11 clients still connected
to Xwayland using the XRes extension, with a list of X11 clients that
can be safely ignored (typically the GNOME XSettings daemon, the IBus
daemon, pulseaudio and even mutter window manager itself).
When there is just those known clients remaining, mutter would kill
Xwayland automatically.
But that's racy, because between the time mutter checks with Xwayland
the remaining clients and the time it actually kills the process, a new
X11 client might have come along and won't be able to connect to
Xwayland that mutter is just about to kill.
Because of that, the feature “autoclose-xwayland” is marked as an
experimental feature in mutter and not enabled by default.
Thankfully, the Xserver has all it takes to manage that already, and
is even capable of terminating itself once all X11 clients are gone (the
-terminate option on the command line).
With XFixes version 6, the X11 clients can declare themselves
"terminatable", so that the Xserver could simply ignore those X11
clients when checking the remaining clients and terminate itself
automatically.
Use that mechanism to declare mutter's own connection to the Xserver as
"terminatable" when Xwayland is started on demand so that it won't hold
Xwayland alive for the sole purpose of mutter itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1794>
It is possible that we never create a cached state for a surface
even if it is synced. That is the case if `commit()` is never called.
We still need to call `apply_state()` in this case in order to run
e.g. `role_post_apply_state()` or `parent_state_applied` on subsurfaces.
So just ensure to initialize the cached state instead of bailing out.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2232>
Subsurfaces can be effectively synced indirectly via their ancestors.
Right now such indirectly synced surfaces don't apply their cached
state when their ancestor effectively becomes desync as by the time
we call `parent_state_applied()` on them, they are considered as
desync.
Thus sligthly reoder things so when the ancestors becomes desync
and applies its state, those surfaces still count as synced and
will thus apply their cached state as well.
While on it, add a check to prevent `set_desync()` to have side
effects when the target surface is not currently synced.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2232>
When running in KVM, the EGL driver supports querying the render node
path, but it returns NULL. Handle that better by falling back to
querying the device main device file, instead of falling back on v3 of
the protocol and logging a warning.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2151>
If the EGL header is not new enough, it will not contain that relatively
new macro definition, so to avoid breaking compilation, define it
ourselves for now. Should be possible to remove after some time.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2214>
This significantly increases the chance of a fullscreen surface buffer
being scanned out instead of being painted via composition. This is
assuming the client supports the DMA buffer feedback Wayland protocol.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2146>
Whenever a surface is promoted as a scanout candidate by
MetaCompositorNative, it'll get a CRTC set as the candidate CRTC.
When a client asks for DMA buffer surface feedback, use this property to
determine whether we should send a scanout feedback tranche.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1959>
