When using the EGLStream backend, the MetaRendererNative passed a
GClosure to KMS when using EGLStreams, but KMS flip callback event
handler in meta-gpu-kms.c expected a closure wrapped in a closure
container, meaning it'd instead crash when using EGLStreams. Make the
flip handler get what it expects also when using EGLStreams by wrapping
the flip closure in the container before handing it over to EGL.
https://bugzilla.gnome.org/show_bug.cgi?id=790316
(cherry picked from commit 8ee14a7cb7)
One of the current limitations of EGLStreams is that there's no way to
resize a surface consumer without re-creating the entire stream.
Therefore, while resizing, clients will send wl_surface::attach requests
so the compositor can re-create its endpoint of the stream, but no
buffer will be available actually. If we proceed with the rest of the
attach operation we'll be presenting an empty buffer.
In order to fix this, a separate wl_eglstream_controller protocol has
been introduced that clients can use to request a stream re-creation
without overloading wl_surface::attach for that purpose.
This change adds the required logic to create the corresponding
wl_eglstream_controller global interface that clients can bind to.
Whenever a client requests a stream to be created, we just need to
create and realize the new EGLStream buffer. The same buffer resource
will be given at a later time to wl_surface::attach, whenever new
content is made available by the application, so we can proceed to
acquire the stream buffer and update the surface state.
https://bugzilla.gnome.org/show_bug.cgi?id=782575
(cherry picked from commit 435b3c4bdb)
Commit 22723ca37 moved buffer realization to
meta_wayland_surface_commit() so that it wouldn't be part of
meta_wayland_buffer_attach().
However, creation of dmabuf buffers would call into
meta_wayland_buffer_attach() directly without realizing the buffer
first. attach() would then fail and mutter would effectively shut down
any clients using the zwp_linux_dmabuf protocol (note that if such
client was Xwayland, mutter itself would shut down as well).
Add the missing bit in order to make zwp_linux_dmabuf protocol work
again.
(cherry picked from commit 54709c16b5)
Clients using EGLStream-backed buffers will expect the stream to be
functional after wl_surface::attach(). That means the compositor-side
stream must be created and a consumer attached to it.
To resolve the above, this change realizes buffers even when the attach
operation is deferred (e.g. synchronized subsurfaces).
https://bugzilla.gnome.org/show_bug.cgi?id=782575
(cherry picked from commit 22723ca371)
When dealing with synchronized subsurfaces, we defer buffer attachments
until the parent surface state is applied.
That causes interaction issues with EGLStream backed buffers, as the
client expects the compositor-side stream to be functional after it
requests a wl_surface::attach.
By allowing the compositor to realize buffers without attaching them, we
could resolve the issue above if we define a realized EGLStream buffer
as a functional EGLStream (EGLStream + attached consumer).
This change moves the texture consumer creation part from the attach
function to the realize one.
https://bugzilla.gnome.org/show_bug.cgi?id=782575
(cherry picked from commit edd3634bb5)
Commit 712ec30cd9 added the logic to only
choose EGL configs that match the GBM_FORMAT_XRGB8888 pixel format.
However, there won't be any EGL config satisfying such criteria for
non-GBM backends, such as EGLDevice.
This change will let us choose the first EGL config for the EGLDevice
backend, while still forcing GBM_FORMAT_XRGB8888 configs for the GBM
one.
Related to: https://gitlab.gnome.org/GNOME/mutter/issues/2
(cherry picked from commit 1bf2eb95b5)
Commit 840378ae68 changed the code to use XmbTextPropertyToTextList()
instead of gdk_text_property_to_utf8_list_for_display(), but didn't
take into account that the replacement returns text in the current
locale's encoding, while any callers (rightfully) expect UTF8.
Fix this by converting the text if necessary.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/227
The WM_NAME property is of type TEXT_PROPERTY, which is supposed to be
returned as UTF-8. Commit 840378ae68 broke that assumption, resulting
in crashes with non-UTF8 locales; however the "fix" of converting from
LATIN1 to UTF8 is wrong as well, as the conversion will spit out garbage
when the input encoding isn't actually LATIN1.
Now that the original issue in text_property_to_utf8() has been fixed,
we can simply revert the relevant bits of commit d62491f46e.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/227
As with xdg-toplevel, a gtk-surface can be unmanaged by the compositor
without the client knowing about it, meaning the client may still send
updates and make requests. Handle this gracefully by ignoring them. The
client needs to reset all the state anyway, if it wants to remap the
same surface.
https://gitlab.gnome.org/GNOME/mutter/issues/240
(cherry picked from commit ca5b27baf5)
As with xdg-toplevel proper, a legacy xdg-toplevel can be unmanaged by
the compositor without the client knowing about it, meaning the client
may still send updates and make requests. Handle this gracefully by
ignoring them. The client needs to reassign the surface the legacy
xdg-toplevel role again, if it wants to remap the same surface, meaning
all state would be reset anyway.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/240
(cherry picked from commit 64df627688)
A toplevel window can be unmanaged without the client knowing it (e.g. a
modal dialog being unmapped together with its parent. When this has
happened, take frame callbacks queued on a commit and cache them on the
generic surface queue. If the toplevel is to be remapped because the
surface was reassigned the toplevel role, the cached frame callbacks
will be queued on the surface actor and dispatched accordingly.
https://gitlab.gnome.org/GNOME/mutter/issues/240
(cherry picked from commit a740f50cd7)
A window can be unmanaged without asking the client to do it, for
example as a side effect of a parent window being unmanaged, if the
child window was a attached dialog.
This means that the client might still make requests post updates to it
after that it was unmapped. Handle this gracefully by NULL-checking the
surface's MetaWindow pointer. We're not loosing any state due to this,
as if the client wants to map the same surface again, it needs to either
reassign it the toplevel role, or reset the xdg-toplevel, both resulting
in all state being lost anyway.
https://gitlab.gnome.org/GNOME/mutter/issues/240
(cherry picked from commit 5fd0f62a62)
A toplevel window can be unmanaged without the client knowing it (e.g. a
modal dialog being unmapped together with its parent. When this has
happened, take frame callbacks queued on a commit and cache them on the
generic surface queue. If the toplevel is to be remapped, either because
the surface was reassigned the toplevel role, or if it was reset and
remapped, the cached frame callbacks will be queued on the surface actor
and dispatched accordingly.
https://gitlab.gnome.org/GNOME/mutter/issues/240
(cherry picked from commit 80d420ff43)
A popup can be reset, and when that happens, window and actor are
destroyed, and won't be created again unless it is reassigned the
popup role.
If a client queued frame callbacks when resetting a popup, the frame
callbacks would be left in the pending state, as they were not queued on
the actor, meaning we'd hit an assert about the frame callbacks not
being handled. Fix this by caching them on the MetaWaylandSurface, so
that they either are cleaned up on destruction, or queued on the actor
would the surface be re-assigned the popup role.
https://gitlab.gnome.org/GNOME/mutter/issues/240
(cherry picked from commit 407d62943c)
Sometimes it may be useful for roles to put callbacks in the generic
surface frame callback queue. The surface frame callback queue will
either eventually be processed on the next surface role assignment that
places the frame callbacks in a role specific queue, processed at some
other point in time by a role, or cleaned up on surface destruction.
https://gitlab.gnome.org/GNOME/mutter/issues/240
(cherry picked from commit 0ace58d05f)
When a xdg-toplevel is reset, the window and actor are recreated, and
all state is cleared. When this happened, we earlied out from the
xdg-toplevel commit handler, which would mean that if the client had
queued frame callbacks when resetting, they'd be left in the pending
commit state, later hitting an assert as they were not handled.
Fix this by queuing the frame callbacks no the new actor, so that they
are emitted whenever the actor is eventually painted.
https://gitlab.gnome.org/GNOME/mutter/issues/240
(cherry picked from commit d791710197)
On Wayland, xdg-foreign would leave a modal dialog managed even after
the imported surface is destroyed.
This is sub-optimal and this breaks the atomic relationship one would
expect between the parent and its modal dialog.
Make sure we unmanage the dialog if transient_for is unset even for
Wayland native windows.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/174
Related: https://gitlab.gnome.org/GNOME/mutter/issues/221
(cherry picked from commit b443bd42ac)
XcursorLibraryLoadCursor can return 'None' if the current cursor theme
is missing the requested icon. If XFreeCursor is then called on this
cursor, it generates a BadCursor error causing gnome-shell to crash.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/254
(cherry picked from commit 1bfa20929b)
By using the shm file when sending the keymap to all clients, we
effectively allows any client to change the keymap, as any client has
the ability to change the content of the file. Sending a read-only file
descriptor, or making the file itself read-only before unlinking, can
be worked around by the client by using chmod(2) and open(2) on
/proc/<pid>/<fd>.
Using memfd could potentially solve this issue, but as the usage of
mmap with MAP_SHARED is wide spread among clients, such a change can
not be introduced without causing wide spread compatibility issues.
So, to avoid allowing clients to interfere with each other, create a
separate shm file for each wl_keyboard resource when sending the
keymap. We could eventually do this per client, but in most cases,
there will only be one wl_keyboard resource per client anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=784206
Commit c0d9b08ef9 replaced the old GBM API calls
with the multi-plane GBM API. However, the call to gbm_bo_get_handle_for_plane
fails for some DRI drivers (in particular i915). Due to missing error checks,
the subsequent call to drmModeAddFB[2] fails and the screen output locks up.
This commit adds the missing error checks and falls back to the old GBM API
(non-planar) if necessary.
v5: test success of gbm_bo_get_handle_for_plane instead of errno
This commit adopts solution proposed by Daniel van Vugt to check the return
value of gbm_bo_get_handle_for_plane on plane 0 and fall back to old
non-planar method if the call fails. This removes the errno check (for
ENOSYS) that could abort if mesa ever sets a different value.
Related to: https://gitlab.gnome.org/GNOME/mutter/issues/127
(cherry picked from commit f7af32a3ea)
We need a way for mutter to exit if no available GPUs are going to work.
For example if gdm starts gnome-shell and we're using a DRM driver that
doesn't work with KMS then we should exit so that GDM can try with Xorg,
rather than operating in headless mode.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/223
(cherry picked from commit deb541ef5a)
DRM drivers can be opened by meta_launcher_open_restricted() even if they don't
implement modesetting. However, drmModeGetResources() will return NULL.
Check whether that happened in meta_gpu_kms_new() and return with an error
instead of crashing.
Fixes#223.
For historical reasons meta_monitor_is_active() checked whether it is
active by checking whether the main output have a CRTC assigned and
whether that CRTC has a current mode. At a later point, the MetaMonitor
got its own mode abstraction (MetaMonitorMode), but
meta_monitor_is_active() was never updated to use this.
An issue with checking the main output's CRTC state is that, if there is
some CRTC mode combination that for some reason isn't properly detected
by the MetaMonitorMode abstraction (e.g. some tiling configuration not
yet handled), meta_monitor_is_active() would return TRUE, even though no
(abstracted) mode was set. This would cause confusion here and there,
leading to NULL pointer dereferences due to the assumption that if a
monitor is active, it has an active mode.
Instead, change meta_monitor_is_active() to directly check the current
monitor mode, and log a warning if the main output still happen to have
a CRTC with a mode assigned to it. This way, when an not undrestood CRTC
mode combination is encountered, instead of dereferencing NULL pointers,
simply assume the monitor is not active, which means that it will not be
managed or rendered by mutter at all.
https://gitlab.gnome.org/GNOME/mutter/issues/130
(cherry picked from commit 4d465eac08)
When a transient window is destroyed, the expected behavior is that
focus is passed to the ancestor if possible. This was broken for
quite a while until the previous commit, so add a test case to make
sure it doesn't happen again.
https://gitlab.gnome.org/GNOME/mutter/issues/15
(cherry-picked from commit 137f22236c)
Since commit b3b9d9e16 we no longer have to pass the unmanaging window
to make sure we don't try to focus it again, however the parameter also
influences the focus policy by giving ancestors preference over the normal
stack order.
https://gitlab.gnome.org/GNOME/mutter/issues/15
(cherry picked from commit d99442d6e6)
We refuse to move focus while a grab operation is in place. While this
generally makes sense, there's no reason why the window that owns the
grab shouldn't be given the regular input focus as well - we pretty
much assume that the grab window is also the focus window anyway.
In fact there's a strong reason for allowing the focus change here:
If the grab window isn't the focus window, it probably has a modal
transient that is focused instead, and a likely reason for the focus
request is that the transient is being unmanaged and we must move
the focus elsewhere.
https://gitlab.gnome.org/GNOME/mutter/issues/15
(cherry picked from commit 148da24f95)
If drmModeSetCrtc() is called with no fb, mode or connectors for some
CRTC it may still fail, and we should handle that gracefully instead of
assuming it failed to set a non-disabled state.
Closes https://gitlab.gnome.org/GNOME/mutter/issues/70
(cherry picked from commit 6e953e2725)
If the surface is gone before `meta_xwayland_keyboard_grab_end()` is
called, we would bail out early leaving an empty grab, which will cause
a segfault as soon as a key is pressed later on.
Make sure we clean up the keyboard grab even if the surface is gone.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/255
(cherry picked from commit 252dd52439)
To avoid a known race condition in the wl_output protocol documented in
https://phabricator.freedesktop.org/T7722, mutter delays the `wl_output`
destruction but nullify the `logical_monitor` associated with the
`wl_output` and the binding routine `bind_output()` makes sure not to
send wl_output events if the `logical_monitor` is `NULL` (see commit
1923db97).
The binding routine for `xdg_output` however does not check for such a
condition, hence if the output configuration changes while a client is
binding to xdg-output (typically Xwayland at startup), mutter would
crash while trying to access the `logical_monitor` which was nullified
by the change in configuration.
Just like `bind_output()` does for wl_output, do not send xdg-output
events if there is no `logical_monitor` yet.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/194
(cherry picked from commit 68ec9ac017)
If a client asks for xdg-output before we have set the output's logical
monitor, we would end up crashing with a NULL pointer dereference.
Make sure we clear the resource's user data when marking an output as
inert on monitor change so that we don't end up with a Wayland output
without a logical monitor.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/194
(cherry picked from commit 48eaa36d41)
When we update the main monitor, there is a rule that makes it so that
popup windows use the same main monitor as their parent. In the commit
f4d07caa38 the call that updates and
fetches the main monitor of the toplevel accidentally changed to update
from itself, causing a indefinite recursion eventually resulting in a
crash.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/279
(cherry picked from commit e191c21e04)
meta_window_wayland_update_main_monitor() would skip the monitor update
if the difference in scale between the old and the new monitor would
cause another monitor change.
While this is suitable when the monitor change results from a user
interactively moving the surface between monitors of different scales,
this can leave dangling pointers to freed monitors when this is
triggered by a change of monitor configuration.
Make sure we update the monitor unconditionally if not from a user
operation.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/189
(cherry picked from commit a3da4b8d5b)
meta_window_wayland_update_main_monitor() would skip the monitor update
if the difference in scale between the old and the new monitor would
cause another monitor change.
While this is suitable when the monitor change results from a user
interactively moving the surface between monitors of different scales,
this can leave dangling pointers to freed monitors when this is
triggered by a change of monitor configuration.
Make sure we update the monitor unconditionally if not from a user
operation.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/189
(cherry picked from commit a3da4b8d5b)
Add API to let GNOME Shell have the ability to get notified about remote
access sessions (remote desktop, remote control and screen cast), and
with a way to close them.
This is done by adding an abstraction above the remote desktop and
screen cast session objects, to avoid exposing their objects to outside
of mutter. Doing that would result in external parts holding references
to the objects, complicating their lifetimes. By using separate wrapper
objects, we avoid this issue all together.
Sending button events to a ClutterVirtualInputDevice, the API expects
button codes to be of the internal clutter type. The evdev
implementation incorrectly assumed it was already prepared evdev event
codes, which was not the case. Fix the evdev implementation to translate
from the internal representation to evdev before passing it along to
ClutterSeatEvdev.
The "backends: Move MetaOutput::crtc field into private struct"
accidentally changed the view transform calculation code to assume that
"MetaCrtc::transform" corresponds to the transform of the CRTC; so is
not the case yet; one must calculate the transform from the logical
monitor, and check whether it is supported by the CRTC using
meta_monitor_manager_is_transform_handled(). This commit restores the
old behaviour that doesn't use MetaCrtc::transform when calculating the
view transform.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/216
GNOME Shell relies on the MetaScreen::startup-sequence-changed signal,
which is tied to (lib)startup-notification and therefore X11. As a result,
when we remove the startup sequence of a wayland client, GNOME Shell will
not be notified about this until startup-notification's timeout is hit.
As a temporary stop-gap, go through XWayland even for wayland clients,
so that the signal is emitted when expected.
https://bugzilla.gnome.org/show_bug.cgi?id=768531
For some reason "backends: Remove X11 idle-monitor backend" removed
unrelated warning messages for when generated monitor configurations
that should work didn't, which also made the unit tests fail.
This commit adds them back, which also makes the tests pass again.
(cherry picked from commit d9c18fd5bb)
The framerate for screen cast sources was set to variable within 1 FPS
and the framerate of the monitor being screen casted. This meant that if
the sink didn't match the framerate (e.g. had a lower max framerate),
the formats would not match and a stream would not be established.
Allow letting the sink clamp the framerate range by setting it as
'unset', allowing it to be negotiated.
