Since the Cogl 1.18 branch is actively maintained in parallel with the
master branch; this is a counter part to commit 1b83ef938fc16b which
re-licensed the master branch to use the MIT license.
This re-licensing is a follow up to the proposal that was sent to the
Cogl mailing list:
http://lists.freedesktop.org/archives/cogl/2013-December/001465.html
Note: there was a copyright assignment policy in place for Clutter (and
therefore Cogl which was part of Clutter at the time) until the 11th of
June 2010 and so we only checked the details after that point (commit
0bbf50f905)
For each file, authors were identified via this Git command:
$ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD
We received blanket approvals for re-licensing all Red Hat and Collabora
contributions which reduced how many people needed to be contacted
individually:
- http://lists.freedesktop.org/archives/cogl/2013-December/001470.html
- http://lists.freedesktop.org/archives/cogl/2014-January/001536.html
Individual approval requests were sent to all the other identified authors
who all confirmed the re-license on the Cogl mailinglist:
http://lists.freedesktop.org/archives/cogl/2014-January
As well as updating the copyright header in all sources files, the
COPYING file has been updated to reflect the license change and also
document the other licenses used in Cogl such as the SGI Free Software
License B, version 2.0 and the 3-clause BSD license.
This patch was not simply cherry-picked from master; but the same
methodology was used to check the source files.
This adds a new function to enable per-vertex point size on a
pipeline. This can be set with
cogl_pipeline_set_per_vertex_point_size(). Once enabled the point size
can be set either by drawing with an attribute named
'cogl_point_size_in' or by writing to the 'cogl_point_size_out'
builtin from a snippet.
There is a feature flag which must be checked for before using
per-vertex point sizes. This will only be set on GL >= 2.0 or on GLES
2.0. GL will only let you set a per-vertex point size from GLSL by
writing to gl_PointSize. This is only available in GL2 and not in the
older GLSL extensions.
The per-vertex point size has its own pipeline state flag so that it
can be part of the state that affects vertex shader generation.
Having to enable the per vertex point size with a separate function is
a bit awkward. Ideally it would work like the color attribute where
you can just set it for every vertex in your primitive with
cogl_pipeline_set_color or set it per-vertex by just using the
attribute. This is harder to get working with the point size because
we need to generate a different vertex shader depending on what
attributes are bound. I think if we wanted to make this work
transparently we would still want to internally have a pipeline
property describing whether the shader was generated with per-vertex
support so that it would work with the shader cache correctly.
Potentially we could make the per-vertex property internal and
automatically make a weak pipeline whenever the attribute is bound.
However we would then also need to automatically detect when an
application is writing to cogl_point_size_out from a snippet.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 8495d9c1c15ce389885a9356d965eabd97758115)
Conflicts:
cogl/cogl-context.c
cogl/cogl-pipeline-private.h
cogl/cogl-pipeline.c
cogl/cogl-private.h
cogl/driver/gl/cogl-pipeline-progend-fixed.c
cogl/driver/gl/gl/cogl-pipeline-progend-fixed-arbfp.c
Since _cogl_pipeline_update_blend_enable() can sometimes show up quite
high in profiles; instead of calling
_cogl_pipeline_update_blend_enable() whenever we change pipeline state
that may affect blending we now just set a dirty flag and when we flush
a pipeline we check this dirty flag and lazily calculate whether blender
really needs to be enabled if it's set.
Since it turns out we were too optimistic in assuming most GL drivers
would recognize blending with ADD(src,0) is equivalent to disabling
GL_BLEND we now check this case ourselves so we can always explicitly
disable GL_BLEND if we know we don't need blending.
This introduces the idea of an 'unknown_color_alpha' boolean to the
pipeline flush code which is set whenever we can't guarantee that the
color attribute is opaque. For example this is set whenever a user
specifies a color attribute with 4 components when drawing a primitive.
This boolean needs to be cached along with every pipeline because
pipeline::real_blend_enabled depends on this and so we need to also call
_cogl_pipeline_update_blend_enable() if the status of this changes.
Incidentally with this patch we now no longer ever use
_cogl_pipeline_set_blend_enable() internally. For now the internal api
hasn't been removed though since we might want to consider re-purposing
it as a public api since it will now not conflict with our own internal
state tracking and could provide a more convenient way to disable
blending than setting a blend string.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
This makes it possible to create vertex attributes that efficiently
represent constant values without duplicating the constant for every
vertex. This adds the following new constructors for constant
attributes:
cogl_attribute_new_const_1f
cogl_attribute_new_const_2fv
cogl_attribute_new_const_3fv
cogl_attribute_new_const_4fv
cogl_attribute_new_const_2f
cogl_attribute_new_const_3f
cogl_attribute_new_const_4f
cogl_attribute_new_const_2x2fv
cogl_attribute_new_const_3x3fv
cogl_attribute_new_const_4x4fv
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6507216f8030e84dcf2e63b8ecfe906ac47f2ca7)
This removes the need to maintain an array of tex_coord varyings and
instead we now just emit a varying per-layer uniquely named using a
layer_number infix like cogl_tex_coord0_out and cogl_tex_coord0_in.
Notable this patch also had to change the journal flushing code to use
pipeline layer numbers to determine the name of texture coordinate
attributes.
We now also break batches by using a deeper comparison of layers so
such that two pipelines with the same number of layers can now cause a
batch break if they use different layer numbers.
This adds an internal _cogl_pipeline_layer_numbers_equal() function that
takes two pipelines and returns TRUE if they have the same number of
layers and all the layer numbers are the same too, otherwise it returns
FALSE.
Where we used to break batches based on changes to the number of layers
we now break according to the status of
_cogl_pipeline_layer_numbers_equal
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit e55b64a9cdc93285049d9b969bef67484c2d9fb3)
Note: this will cause a temporary regression for the Cogl 1.x CoglShader
api since it will break compatibility with existing shaders that
reference the texture varyings from the fragment shader.
The intention is to follow up with another patch to add back
CoglShader compatibility.
As part of an on-going effort to enable non-opengl drivers for Cogl this
splits out the GL specific code in cogl-attribute.c into
cogl/driver/gl/cogl-attribute-gl.c
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 7e20c39c47fa176aa5062867ff273bc2c41a2f22)
Previously the CoglDrawFlags passed to
_cogl_framebuffer_draw_indexed_attributes when drawing is redirected
to draw a wireframe are overriden to avoid validating the pipeline,
flushing the framebuffer state and flushing the journal. This ends up
breaking scenes that only contain models drawn from attributes in the
application because nothing will flush the matrices. It seems to make
more sense to just use whatever draw flags were passed from the
original draw command so that it will flush the matrices if the caller
was expecting it.
One problem with this is that if the wireframe causes the journal to
be flushed then it will already have temporarily disabled the
wireframe debug flag so the journal will not be drawn with wireframes.
To fix this the patch adds a CoglDrawFlag to disable the wireframe and
uses that instead of disabling the debug flag.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 283f6733e63ba65d9921f45868edaabbd9420a61)
The coding style has for a long time said to avoid using redundant glib
data types such as gint or gchar etc because we feel that they make the
code look unnecessarily foreign to developers coming from outside of the
Gnome developer community.
Note: When we tried to find the historical rationale for the types we
just found that they were apparently only added for consistent syntax
highlighting which didn't seem that compelling.
Up until now we have been continuing to use some of the platform
specific type such as gint{8,16,32,64} and gsize but this patch switches
us over to using the standard c99 equivalents instead so we can further
ensure that our code looks familiar to the widest range of C developers
who might potentially contribute to Cogl.
So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this
switches all Cogl code to instead use the int{8,16,32,64}_t and
uint{8,16,32,64}_t c99 types instead.
Instead of gsize we now use size_t
For now we are not going to use the c99 _Bool type and instead we have
introduced a new CoglBool type to use instead of gboolean.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
The idea is that CoglPixelBuffer should just be a buffer that can be
used for pixel data and it has no idea about the details of any images
that are stored in it. This is analogous to CoglAttributeBuffer which
itself does not have any information about the attributes. When you
want to use a pixel buffer you should create a CoglBitmap which points
to a region of the attribute buffer and provides the extra needed
information such as the width, height and format. That way it is also
possible to use a single CoglPixelBuffer with multiple bitmaps.
The changes that are made are:
• cogl_pixel_buffer_new_with_size has been removed and in its place is
cogl_bitmap_new_with_size. This will create a pixel buffer at the
right size and rowstride for the given width/height/format and
immediately create a single CoglBitmap to point into it. The old
function had an out-parameter for the stride of the image but with
the new API this should be queriable from the bitmap (although there
is no function for this yet).
• There is now a public cogl_pixel_buffer_new constructor. This takes
a size in bytes and data pointer similarly to
cogl_attribute_buffer_new.
• cogl_texture_new_from_buffer has been removed. If you want to create
a texture from a pixel buffer you should wrap it up in a bitmap
first. There is already API to create a texture from a bitmap.
This patch also does a bit of header juggling because cogl-context.h
was including cogl-texture.h and cogl-framebuffer.h which were causing
some circular dependencies when cogl-bitmap.h includes cogl-context.h.
These weren't actually needed in cogl-context.h itself but a few other
headers were relying on them being included so this adds the #includes
where necessary.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds cogl_framebuffer_ apis for drawing attributes and primitives
that replace corresponding apis that depend on the default CoglContext.
This is part of the on going effort to adapt the Cogl api so it no
longer depends on a global context variable.
All the new drawing functions also take an explicit pipeline argument
since we are also aiming to avoid being a stateful api like Cairo and
OpenGL. Being stateless makes it easier for orthogonal components to
share access to the GPU. Being stateless should also minimize any
impedance miss-match for those wanting to build higher level stateless
apis on top of Cogl.
Note: none of the legacy, global state options such as
cogl_set_depth_test_enabled(), cogl_set_backface_culling_enabled() or
cogl_program_use() are supported by these new drawing apis and if set
will simply be silently ignored.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This removes the limited caching of enabled attributes done by
_cogl_enable() and replaces it with a more generalized set of bitmasks
associated with the context that allow us to efficiently compare the set
of attribute locations that are currently enabled vs the new locations
that need enabling so we only have to inform OpenGL of the changes in
which locations are enabled/disabled.
This also adds a per-context hash table for mapping attribute names to
global name-state structs which includes a unique name-index for any
name as well as pre-validated information about builtin "cogl_"
attribute names including whether the attribute is normalized and what
texture unit a texture attribute corresponds too.
The name-state hash table means that cogl_attribute_new() now only needs
to validate names the first time they are seen.
CoglAttributes now reference a name-state structure instead of just the
attribute name, so now we can efficiently get the name-index for any
attribute and we can use that to index into a per-glsl-program cache
that maps name indices to real GL attribute locations so when we get
asked to draw a set of attributes we can very quickly determine what GL
attributes need to be setup and enabled. If we don't have a cached
location though we can still quickly access the string name so we can
query OpenGL.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Calling g_strdup for attribute names was starting to show up in profiles
due to calling malloc for new string storage so frequently. This avoids
calling g_strdup and calls g_intern_string() instead. For the really
common case names we even avoid the cost of g_intern_string since we
can trivially relate our internal name_id to a static string.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Some code in Cogl such as when flushing a stencil clip assumes that it
can push a temporary simple pipeline to reset to a known state for
internal drawing operations. However this breaks down if the
application has set any legacy state because that is set globally so
it will also get applied to the internal pipeline.
_cogl_draw_attributes already had an internal flag to disable applying
the legacy state but I think this is quite awkward to use because not
all places that push a pipeline draw the attribute buffers directly so
it is difficult to pass the flag down through the layers.
Conceptually the legacy state is meant to be like a layer on top of
the purely pipeline-based state API so I think ideally we should have
an internal function to push the source without the applying the
legacy state. The legacy state can't be applied as the pipeline is
pushed because the global state can be modified even after it is
pushed. This patch adds a _cogl_push_source() function which takes an
extra boolean flag to mark whether to enable the legacy state. The
value of this flag is stored alongside the pipeline in the pipeline
stack. Another new internal function called
_cogl_get_enable_legacy_state queries whether the top entry in the
pipeline stack has legacy state enabled. cogl-primitives and the
vertex array drawing code now use this to determine whether to apply
the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is
now removed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
For the first iteration of the CoglAttribute API several of the new
functions accepted a pointer to a NULL terminated list of CoglAttribute
pointers - probably as a way to reduce the number of arguments required.
This style isn't consistent with existing Cogl APIs though and so we now
explicitly pass n_attributes arguments and don't require the NULL
termination.
This is part of a broader cleanup of some of the experimental Cogl API.
One of the reasons for this particular rename is to switch away from
using the term "Array" which implies a regular, indexable layout which
isn't the case. We also want to have a strongly implied relationship
between CoglAttributes and CoglAttributeBuffers.
This is part of a broader cleanup of some of the experimental Cogl API.
One of the reasons for this particular rename is to reduce the verbosity
of using the API. Another reason is that CoglVertexArray is going to be
renamed CoglAttributeBuffer and we want to help emphasize the
relationship between CoglAttributes and CoglAttributeBuffers.
