If drmModeSetCrtc() is called with no fb, mode or connectors for some
CRTC it may still fail, and we should handle that gracefully instead of
assuming it failed to set a non-disabled state.
Closes https://gitlab.gnome.org/GNOME/mutter/issues/70
(cherry picked from commit 6e953e2725d5d5b10d14c7bd479bd99f6853addc)
Add API to let GNOME Shell have the ability to get notified about remote
access sessions (remote desktop, remote control and screen cast), and
with a way to close them.
This is done by adding an abstraction above the remote desktop and
screen cast session objects, to avoid exposing their objects to outside
of mutter. Doing that would result in external parts holding references
to the objects, complicating their lifetimes. By using separate wrapper
objects, we avoid this issue all together.
The "backends: Move MetaOutput::crtc field into private struct"
accidentally changed the view transform calculation code to assume that
"MetaCrtc::transform" corresponds to the transform of the CRTC; so is
not the case yet; one must calculate the transform from the logical
monitor, and check whether it is supported by the CRTC using
meta_monitor_manager_is_transform_handled(). This commit restores the
old behaviour that doesn't use MetaCrtc::transform when calculating the
view transform.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/216
For some reason "backends: Remove X11 idle-monitor backend" removed
unrelated warning messages for when generated monitor configurations
that should work didn't, which also made the unit tests fail.
This commit adds them back, which also makes the tests pass again.
(cherry picked from commit d9c18fd5bbd6b06453bb06a64eb8b31866d2f963)
The framerate for screen cast sources was set to variable within 1 FPS
and the framerate of the monitor being screen casted. This meant that if
the sink didn't match the framerate (e.g. had a lower max framerate),
the formats would not match and a stream would not be established.
Allow letting the sink clamp the framerate range by setting it as
'unset', allowing it to be negotiated.
Make it so that each logical monitor has a reference to all the
monitors that are assigned to it.
All monitors has a reference to each output that belongs to it.
Each output has a reference to any CRTC it has been assigned.
https://bugzilla.gnome.org/show_bug.cgi?id=786929
(cherry picked from commit 768ec15ea072df21dd6caeb2507d41223ade9116)
No functional changes. This is only done so that changes to reference
counting can done more reliably.
https://bugzilla.gnome.org/show_bug.cgi?id=786929
(cherry picked from commit 1200182d706d5144df49a221b26225c729c2a60b)
When using two monitors size by side with different scales, once the
cursor moves from one output to another one, its size changes based on
the scale of the given output.
Changing the size of the cursor can cause the cursor area to change
output again if the hotspot is not exactly at the top left corner of the
area, causing the texture of the cursor to change, which will trigger
another output change, so on and so forth causing continuous surface
enter/leave event which flood the clients and eventually kill them.
Change the logic to use only the actual cursor position to determine if
its on the given logical monitor, so that it remains immune to scale
changes induced by output scale differences.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/83
(cherry picked from commit 67917db45f96befb777e5f331a775ea3c2b53012)
While MetaStage, MetaWindowGroup and MetaDBusDisplayConfigSkeleton don't
appear explicitly in the public API, their gtypes are still exposed via
meta_get_stage_for_screen(), meta_get_*window_group_for_screen() and
MetaMonitorManager's parent type. Newer versions of gjs will warn about
undefined properties if it encounters a gtype without introspection
information, so expose those types to shut up the warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
Various code assumed PipeWire function calls would never fail. Some can
actually fail for real reasons, and some currently can only fail due to
OOM situations, but we should still not assume that will always be the
case.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/102
(cherry picked from commit 0f9c6aef99b223a6f520071d640cf34c92046f7a)
Before we just set it to "none", but this was not enough since various
calls will depend on not just the context being active, but the main
rendering surface.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/21
(cherry picked from commit ae26cd07740e45ae16a3503004933d1cc295df29)
When deriving the global scale directly from the current hardware state
(as done when using the X11 backend) we are inspecting the logical
state they had prior to the most recent hot plug. That means that a
primary monitor might have been disabled, and a new primary monitor may
not have been assigned yet.
Stop assuming a primary monitor has an active mode before having
reconstructed the logical state by finding some active monitor if the
old primary monitor was disabled. This avoids a crash when trying to
derive the global scale from a disabled monitor.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/130
(cherry picked from commit 0b3a1c9c314a88c57668437245d54b200537e619)
As a follow up to the patch from a95cbd0a, we need to make sure
that the pointer is out of the way as well when monitors changed,
since that's the event that will prevail in some cases. Besides,
this is also consistent with what the code before a95cbd0a was,
which initialized the pointer position in the same way both in
this case and in the real_post_init() function.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/157
Centering the pointer at startup causes undesired behaviour if
it ends up hovering over reactive elements, that might react
to that positioning, causing confusion. This is the case of
the login dialog when a list of different users is shown, as
centering the pointer at startup in that case will get the
user in the center of the screen pre-selected, which is not
the expected behaviour (i.e. pre-selecting the first one).
Fix this by simply moving the pointer out of the way, close
to the bottom-right corner, during initialization.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/157
The ResetIdletime API can be used instead of an "XTest" binary to
programmatically reset the idle time, as if the user pressed a button on
a keyboard.
This is necessary since we stopped using the XSync extension to monitor
idletimes, as it didn't consider inhibitors as busy, and mutter's
clutter code ignores "Core Events" as generated by XTest.
This patch will require minimal changes to gnome-settings-daemon's power
test suite so that "key press" idletime resets are triggered through
this D-Bus interface rather than through XTest and a roundtrip through
the X server.
https://bugzilla.gnome.org/show_bug.cgi?id=705942
Take idle inhibitions into account for when to fire idle watches as
requested by OS components.
This should stop gnome-session and gnome-settings-daemon considering
the session idle when they have been inhibited for longer than their
timeout, for example to avoid the screensaver activating, or the
computer suspending after watching a film.
https://bugzilla.gnome.org/show_bug.cgi?id=705942
Now that we've removed the X11 specific backend of the idle monitor,
add back a cut-down version of it for the explicit purpose of being
told about idle time resets when XTest events are used.
XTest events are usually used by test suites and remote display software
to inject events into an X11 session. We should consider somebody moving
the mouse remotely to be just as "active" as somebody moving it locally.
https://bugzilla.gnome.org/show_bug.cgi?id=705942
And use the old "native" backend for both X11 and Wayland. This will
allow us to share fixes between implementations without having to delve
into the XSync X11 extension code.
https://bugzilla.gnome.org/show_bug.cgi?id=705942
Output ID is set equal to 'i' later in the loop. But 'i' was never
incremented, so all outputs were getting the same ID (equal to
the number of CRTCs, because 'i' was reused from the previous loop).
Make it re-enable:able by a hidden "experimental feature". To enable,
add "kms-modifiers" to the org.gnome.mutter.experimental-features
GSettings entry.
https://gitlab.gnome.org/GNOME/mutter/issues/81
If we attempt GBM surface allocation with a set of modifiers but the
allocation fails, fall back to non-modifier allocations. This fixes
startup on Pineview-based Atom systems, where KMS provides us a set of
modifiers but the GBM implementation doesn't support modifier use.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/84
(cherry picked from commit e6109cfc22f06412e67bd3c1f9f0dfa6ad7e0b19)
Rotating an output would show duplicate cursors when the pointer is
located over an area which would be within the output if not rotated.
Make sure to swap the width/height of the output when rotated.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/85
(cherry picked from commit ebff7fd7f4ee2c9636412fe661a1fbdf51f218a0)
Rendering the next frame (which mostly happens as part of the flush done
in swap buffers) is a task that the GPU can complete independently of
the CPU having to wait for previous page flips. So reverse their order
to get the GPU started earlier, with the aim of greater GPU-CPU
parallelism.
(cherry picked from commit 6e415353e311655be9936b9dfb9e23c80ef1eae6)
Mutter recently gained the ability to deal with multiple GPUs
rendering at different displays. These GPUs would have a display
connected to them, and Mutter was adapted in order to be aware
of different GPUs and their outputs.
However, one specific edge case appeared: PRIME systems. PRIME
systems have two GPUs:
* The integrated GPU (iGPU), usually Intel, which has connectors
and deals with the routine load.
* The dedicated GPU (dGPU), usually AMD or NVidia, which has no
connectors at all and are there just to aid heavy loads.
On those systems, the dGPU is aggressively put to sleep by the
kernel to avoid energy waste. Waking it up is a costly operation.
With Mutter's adaptation to deal with multiple GPUs, Mutter began
wakening the dGPU every time some rendering had to be done. This
was causing stuttering every time the dGPU was put to sleep, and
Mutter asked it to wake up again.
To fix this situation, this commit ignores GPUs with no connectors
attached.
Issue: #77
This is a small mistake spotted while working on a solution
for #77. When a GPU fails to initialize, we're adding them
anyway, which might have pretty bad consequences when trying
to use these NULL GPUs.
Issue: #77
We just arbitrarily chose the first EGL config matching the passed
attributes, but we then assumed we always got GBM_FORMAT_XRGB8888. That
was not a correct assumption. Instead, make sure we always pick the
format we expect.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/2
In order to let applications gracefully handle version mismatches, add
a version property to the APIs. Also add a warning on the APIs that
these are not meant for public consumption.
If the coordinates was for a stream not at the stage position (0, 0),
they'd be incorrect. Fix this by correctly translating the coordinates
according to the stream position.
When the buffer modifier is DRM_FORMAT_MOD_LINEAR, we can use the
old code path. That means not specifying any modifier parameter.
It was an issue when the primary GPU was creating a linear GBM surface
and that a secondary GPU (not supporting modifiers) was trying to
import it. It was failing because the driver could not use the
import_modifiers extension even though it could in theory easily
import the buffer.
https://gitlab.gnome.org/GNOME/mutter/issues/18
