The CoglTextureSliceCallback function pointer now takes const pointers
for the texture coordinates. This makes it clearer that the callback
should not modify the array and therefore the backend can use the same
array for both sets of coords.
Given a region of texture coordinates this utility invokes a callback
enough times to cover the region with a subregion that spans the
texture at most once. Eg, if called with tx1 and tx2 as 0.5 and 3.0 it
it would invoke the callback with:
0.5,1.0 1.0,2.0 2.0,3.0
Manual repeating is needed by all texture backends regardless of
whether they can support hardware repeating because when Cogl calls
the foreach_sub_texture_in_region method then it sets the wrap mode to
GL_CLAMP_TO_EDGE and no hardware repeating is possible.
In _cogl_multitexture_quad_single_primitive we use a wrap mode of
GL_CLAMP_TO_EDGE if the texture coordinates are all in the range [0,1]
or GL_REPEAT otherwise. This is to avoid pulling in pixels from either
side when using GL_LINEAR filter mode and rendering the entire
texture. Previously it was checking using the unconverted texture
coordinates. This is ok unless the texture backend is radically
transforming the texture coordinates, such as in the sub texture
backend where the coordinates may map to something completely
different. We now check whether the coordinates are in range after
converting them.
Most of the fields that were previously in CoglTexture are specific to
the implementation of CoglTexture2DSliced so they should be placed
there instead. For example, the 'mipmaps_dirty' flag is an
implementation detail of the ensure_mipmaps function so it doesn't
make sense to force all texture backends to have this function.
Other fields such as width, height, gl_format and format may make
sense for all textures but I've added them as virtual functions
instead. This may make more sense for a sub-texture backend for
example where it can calculate these based on the full texture.
The CoglTexture struct previously contained some fields which are only
used to upload data such as the CoglBitmap and the source GL
format. These are now moved to a separate CoglTextureUploadData struct
which only exists for the duration of one of the cogl_texture_*_new
functions. In cogl-texture there are utility functions which operate
on this new struct rather than on CoglTexture directly.
Some of the fields that were previously stored in the CoglBitmap
struct are now copied to the CoglTexture such as the width, height,
format and internal GL format.
The rowstride was previously stored in CoglTexture and this was
publicly accessible with the cogl_texture_get_rowstride
function. However this doesn't seem to be a useful function because
there is no need to use the same rowstride again when uploading or
downloading new data. Instead cogl_texture_get_rowstride now just
calculates a suitable rowstride from the format and width of the
texture.
Commit 558b17ee1e added support for rectangle textures to the
framebuffer code. Under GLES there is no GL_TEXTURE_RECTANGLE_ARB
definition so this was breaking the build. The rest of Cogl uses
ifdef's around that constant so we should do the same here.
• The debug flags are pre-processor ones, so they should be listed
inside AM_CPPFLAGS.
• Clutter's publicly exported symbols match the following regular
expression:
^(clutter|cogl|json)_*
The old one also listed "pango" as a possible prefix, but the
Pango API is now under the Cogl namespace.
We need to add the row-spacing value when calculating the y position for lines
of actors in horizontal flowing layouts.
Similarly we need to add the col-spacing value when calculating the x posution
for actors in vertical flowing layouts.
When requesting the GLXFBConfig for creating the GLX context, we should
always request one that links to an ARGB visual instead of a plain RGB
one.
By using an ARGB visual we allow the ClutterStage:use-alpha property to
work as intended when running Clutter under a compositing manager.
The default behaviour of requesting an ARGB visual can be disabled by
using the:
CLUTTER_DISABLE_ARGB_VISUAL
Environment variable.
The ClutterStage:use-alpha property is used to let a stage know that it
should honour the alpha component of the ClutterStage:color property.
If :use-alpha is set to FALSE the stage always uses the full opacity
when clearing itself before a paint(); otherwise, the alpha value is
used.
The correct blend function for the alpha channel is:
GL_ONE, GL_ONE_MINUS_SRC_ALPHA
As per bug 1406. This fix was dropped when the switch to premultiplied
alpha was merged.
* text-direction:
docs: Add text-direction accessors
Set the default language on the Pango context
actor: Set text direction on parenting
tests: Display the index inside text-box-layout
box-layout: Honour :text-direction
text: Dirty layout cache on text direction changes
actor: Add :text-direction property
Use the newly added ClutterTextDirection enumeration
Add ClutterTextDirection enumeration
The ClutterLayoutMeta instances should be created on demand, whenever
the layout manager needs them - if the layout manager supports layout
properties.
This removes the requirement to call add_child_meta() and
remove_child_meta() on add and remove respectively; it also simplifies
the implementation of LayoutManager sub-classes since we can add
fallback code in the base abstract class.
Eventually, this will also lead to an easier to implement ClutterScript
parser for layout properties.
With the new scheme, the ClutterLayoutMeta instance is created whenever
the layout manager tries to access it; if there isn't an instance
already attached to the container's child, one is created -- assuming
that the LayoutManager sub-class has overridden the
get_child_meta_type() virtual function and it's returning a valid GType.
We can also provide a default implementation for create_child_meta(),
by getting the GType and instantiating a ClutterLayoutMeta with all the
fields already set. If the layout manager requires more work then it can
obviously override the default implementation (and even chain up to it).
The ClutterBox actor has been updated, as well as the ClutterBoxLayout
layout manager, to take advantage of the changes of LayoutManager.
The colour test for the stage in _clutter_do_pick checks for white to
determine whether the stage was picked but since 47db7af4d we were
setting the colur to black. This usually worked because the id of the
default stage ends up being 0 which equates to black. However if a
second stage is created then it will always end up picking the first
stage.
We currently enable blending if the material colour has
transparency. This patch makes it also enable blending if any of the
lighting colours have transparency. Arguably this isn't neccessary
because we don't expose any API to enable lighting so there is no
bug. However it is currently possible to enable lighting with a direct
call to glEnable and this otherwise works so it is a shame not to have
it.
http://bugzilla.openedhand.com/show_bug.cgi?id=1907
The stage's pick id can be written to the framebuffer when we call
cogl_clear so there's no need for the stage to also chain up in it's pick
function resulting in clutter-actor.c also emitting a rectangle for the
stage.
cogl_push_draw_buffer, cogl_set_draw_buffer and cogl_pop_draw_buffer are now
deprecated and new code should use the new cogl_framebuffer_* API instead.
Code that previously did:
cogl_push_draw_buffer ();
cogl_set_draw_buffer (COGL_OFFSCREEN_BUFFER, buffer);
/* draw */
cogl_pop_draw_buffer ();
should now be re-written as:
cogl_push_framebuffer (buffer);
/* draw */
cogl_pop_framebuffer ();
As can be seen from the example above the rename has been used as an
opportunity to remove the redundant target argument from
cogl_set_draw_buffer; it now only takes one call to redirect to an offscreen
buffer, and finally the term framebuffer may be a bit more familiar to
anyone coming from an OpenGL background.
Instead of storing an enum with the backend type for each texture and
then using a switch statement to decide which function to call, we
should store pointers to all of the functions in a struct and have
each texture point to that struct. This is potentially slightly faster
when there are more backends and it makes implementing new backends
easier because it's more obvious which functions have to be
implemented.
cogl_offscreen_new_to_texture previously bailed out if the given texture's
GL target was anything but GL_TEXTURE_2D, but it now also allows
foreign GL_TEXTURE_RECTANGLE_ARB textures.
Thanks to Owen for reporting this issue, ref:
https://bugzilla.gnome.org/show_bug.cgi?id=601032
cogl_material_copy can be used to create a new CoglHandle referencing a copy
of some given material.
From now on we will advise that developers always aim to use this function
instead of cogl_material_new() when creating a material that is in any way
derived from another.
By using cogl_material_copy, Cogl can maintain an ancestry for each material
and keep track of "similar" materials. The plan is that Cogl will use this
information to minimize the cost of GPU state transitions.
This function was #if 0'd before we released Clutter 1.0 so there's no
implementation of it. At some point we thought it might assist with
developers breaking out into raw OpenGL. Breaking out to raw GL is a
difficult problem though so we decided instead we will wait for a specific
use case to arrise before trying to support it.
Actors, unlike objects, can effectively go away whilst being
animated - usually because of an explicit destoy().
The Animation created by clutter_actor_animate() and friends
should keep a weak reference on the actor and eventually
get rid of the animation itself in case the actor goes away
whilst being animated.
_cogl_material_get_layer expects a CoglMaterial* pointer but it was
being called with a CoglHandle. This doesn't matter because the
CoglHandle is actually just the CoglMaterial* pointer anyway but it
breaks the ability to change the _cogl_material_pointer_from_handle
macro.
• Use the same style for the Cogl API reference as the one used for
the Clutter API reference.
• Fix the introspection annotations for cogl_bitmap_get_size_from_file()
The imported Mesa matrix code has some documentation annotations
that make gtk-doc very angry. Since it's all private anyway we
can safely make gtk-doc ignore the offending stuff.
$(COGL_DRIVER)/cogl-defines.h is generated in the configure script so
it ends up in the build directory. Therefore the build rule for
cogl/cogl-defines.h should depend on the file in $(builddir) not
$(srcdir).
The deprecation notices in gtk-doc should also refer to the
release that added the deprecation, and if the deprecated
symbol has been replaced by something else then the new symbol
should be correctly referenced.
The main COGL header cogl.h is currently created at configure time
because it conditionally includes the driver-dependent defines. This
sometimes leads to a stale cogl.h with old definitions which can
break the build until you clean out the whole tree and start from
scratch.
We can generate a stable cogl-defines.h at build time from the
equivalent driver-dependent header and let cogl.h include that
file instead.
_cogl_feature_check expects the array of function names to be
terminated with a NULL pointer but I forgot to add this. This was
causing crashes depending on what happened to be in memory after the
array.
For VBOs, we don't need to check for the extension if the GL version
is greater than 1.5. Non-power-of-two textures are given in 2.0.
We could also assume shader support in GL 2.0 except that the function
names are different from those in the extension so it wouldn't work
well with the current mechanism.
Previously if you need to depend on a new GL feature you had to:
- Add typedefs for all of the functions in cogl-defines.h.in
- Add function pointers for each of the functions in
cogl-context-driver.h
- Add an initializer for the function pointers in
cogl-context-driver.c
- Add a check for the extension and all of the functions in
cogl_features_init. If the extension is available under multiple
names then you have to duplicate the checks.
This is quite tedious and error prone. This patch moves all of the
features and their functions into a list of macro invocations in
cogl-feature-functions.h. The macros can be redefined to implement all
of the above tasks from the same header.
The features are described in a struct with a pointer to a table of
functions. A new function takes the feature description from this
struct and checks for its availability. The feature can take a list of
extension names with a list of alternate namespaces (such as "EXT" or
"ARB"). It can also detect the feature from a particular version of
GL.
The typedefs are now gone and instead the function pointer in the Cogl
context just directly contains the type.
Some of the functions in the context were previously declared with the
'ARB' extension. This has been removed so that now all the functions
have no suffix. This makes more sense when the extension could
potentially be merged into GL core as well.
There is a new internal Cogl function called _cogl_check_driver_valid
which looks at the value of the GL_VERSION string to determine whether
the driver is supported. Clutter now calls this after the stage is
realized. If it fails then the stage is marked as unrealized and a
warning is shown.
_cogl_features_init now also checks the version number before getting
the function pointers for glBlendFuncSeparate and
glBlendEquationSeparate. It is not safe to just check for the presence
of the functions because some drivers may define the function without
fully implementing the spec.
The GLES version of _cogl_check_driver_valid just always returns TRUE
because there are no version requirements yet.
Eventually the function could also check for mandatory extensions if
there were any.
http://bugzilla.openedhand.com/show_bug.cgi?id=1875
We can not process events for a stage that has been destroyed so we
should make sure that the events for the stage are removed from the
global event queue during dispose.
http://bugzilla.openedhand.com/show_bug.cgi?id=1882
Both ClutterAlpha:mode and ClutterAnimation:mode can be defined using:
• an integer id
• the "nick" field of the AnimationMode GEnumValue
• a custom, tweener-like string
All these methods should be documented.
Like in ClutterAlpha, ClutterAnimation:mode must be overridden when
parsing a Script definition, as we accept both a numeric id and the
string id for easing modes.
When _cogl_add_path_to_stencil_buffer is used to draw a path we don't
need to clear the entire stencil buffer. Instead it can clear just the
bounding box of the path. This adds an extra parameter called
'need_clear' which is only set if the stencil buffer is being used for
clipping.
http://bugzilla.openedhand.com/show_bug.cgi?id=1829
When the text direction changes we should evict the cached layouts
to avoid stale entries in case the direction change produces a layout
with the same size.
Every actor should have a property for retrieving (and setting) the
text direction.
The text direction is used to provide a consisten behaviour in both
left-to-right and right-to-left languages. For instance, ClutterText
should perform key navigation following text direction. Layout
managers should also take into account text direction to derive the
right packing order for their children.
Instead of using PangoDirection directly we should use the
ClutterTextDirection enumeration.
We also need a pair of accessor functions for setting and
getting the default text direction.
This fixes a warning about an uninitialised value. It could also
potentially fix some crashes for example if the enable_flags value
happened to include a bit for enabling a vertex array if no vertex
buffer pointer was set.
While loading a JPEG from disk (with clutter_texture_new_from_file),
I got the following:
<Error>: CGBitmapContextCreate: unsupported parameter combination: 8
integer bits/component; 24 bits/pixel; 3-component colorspace;
kCGImageAlphaNone; 3072 bytes/row.
<Error>: CGContextDrawImage: invalid context
Looking around, I found that CGBitmapContextCreate can't make 24bpp
offscreen pixmaps without an alpha channel...
This fixes the bug, and seems to not break other things...
http://bugzilla.openedhand.com/show_bug.cgi?id=1159
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Apple where nice and changed API between releases. This patch checks the
version of the compilation environment and tries to use the right parameter
type.
http://bugzilla.openedhand.com/show_bug.cgi?id=1866
In the new Clutter world backend stage implementations should be lightweight
objects implementing the ClutterStageWindow interface and not ClutterActor
subclasses.
This patch performs various cut-n-pastes to acheive that for the OSX backend
http://bugzilla.openedhand.com/show_bug.cgi?id=1864
ClutterBehaviour should implement the Scriptable interface
and parse ClutterAlpha when implicitly defined, instead of
having this ad hoc code inside ClutterScriptParser itself.
After all, only ClutterBehaviour supports Alpha defined
implicitly.
The ClutterScriptParser should do most of the heavy-lifting for
parsing a JSON object member defining another JSON object into
a GObject property defined using a GParamSpecObject.
cogl_clip_push, and cogl_clip_push_window_rect which are now deprecated were
used in various places internally so this just switches to using the
replacement functions.
cogl_clip_push() which accepts a rectangle in model space shouldn't have
been defined to take x,y,width,height arguments because this isn't consistant
with other Cogl API dealing with model space rectangles. If you are using a
coordinate system with the origin at the center and the y+ extending up,
then x,y,width,height isn't as natural as (x0,y0)(x1,y1). This API has
now been replace with cogl_clip_push_rectangle()
(As a general note: the Cogl API should only use the x,y,width,height style
when the appropriate coordinate space is defined by Cogl to have a top left
origin. E.g. window coordinates, or potentially texture coordinates)
cogl_clip_push_window_rect() shouldn't have been defined to take float
arguments since we only clip with integral pixel precision. We also
shouldn't have abbreviated "rectangle". This API has been replaced with
cogl_clip_push_window_rectangle()
cogl_clip_ensure() wasn't documented at all in Clutter 1.0 and probably
no one even knew it existed. This API isn't useful, and so it's now
deprecated. If no one complains we may remove the API altogether for
Clutter 1.2.
cogl_clip_stack_save() and cogl_clip_stack_restore() were originally added
to allow us to save/restore the clip when switching to/from offscreen
rendering. Now that offscreen draw buffers are defined to own their clip
state and the state will be automatically saved and restored this API is now
redundant and so deprecated.
For a long time now the GLES driver for Cogl has supported a fallback
scanline rasterizer for filling paths when no stencil buffer is available,
but now that we build the same cogl-primitives code for GL and GLES I
thought it may sometimes be useful for debugging to force Cogl to use the
scanline rasterizer instead of the current stencil buffer approach.
In order to know if a layout property exists and retrieve its
description in form of a GParamSpec, we need a wrapper API inside
ClutterLayoutManager. This allows introspecting a LayoutManager
sub-class and eventually serialize and deserialize it.
The ClutterScript parser needs to be extended to parse child properties
and apply them after an actor has been added to a container. In order to
distinguish child properties from regular GObject properties we can use
the "child::" prefix, e.g.:
{
"type" : "ClutterRectangle",
"id" : "child-01",
"child::has-focus" : true,
...
}
Parsing child properties can be deferred to the ClutterScriptable
interface, just like regular properties.
These files were practically identical, except the gles code had additional
support for filling paths without a stencil buffer. All the driver code has
now been moved into cogl/cogl-primitives.c
All the ClutterColor parsing rules should be coalesced inside
clutter_script_parse_color(): object, array and string notations
are the canonical ways of defining a ClutterColor inside a
ClutterScript definition. Having a single function in charge of
the parsing cleans up the code.
Currently, ClutterScriptParser will construct the object (using the
construct-only and construct parameters), apply the properties from
the ClutterScript definition, and eventuall will add children and
behaviours.
The construction phase should be more compartimentalized: the objects
should be constructed first and eventual children and behaviours
added. Then, once an object is requested or when the parsing process
has terminated, all the properties should be applied.
This change allows us to set up the actors before setting their
non-construct properties.
ClutterScript is currently a mix of parser-related code and
the ClutterScript object. All the parser-related code should
be moved inside a private class, ClutterScriptParser, inheriting
from JsonParser.
Instead of counting on a JsonNode pointer to survive we should take
a copy. This allows keeping unresolved properties across different
ClutterScript passes.
It's useful when initialzing offscreen draw buffers to be able to ask
Cogl to create a texture of a given size and with the default internal
pixel format.
When rendering to an fbo for supporting clutter_texture_new_from_actor we
render to an fbo with the same size as the source actor, but with a viewport
the same size as the stage. We offset the viewport so when we render the
source actor in its normal transformed stage position it lands on the fbo.
Previously we were rounding the transformed position given as a float by
truncating the fraction (just using a C cast) but that resulted in an
incorrect pixel offset when rendering offscreen depending on the source
position.
We now simply + 0.5 before casting (or -0.5 for negative numbers)
For supporting clutter_texture_new_from_actor(): when updating a
ClutterTexture's fbo we previously set up an offset frustum in the
perspective matrix before rendering source actors to an offscreen draw
buffer so as to give a perspective as if it were being drawn at its
original stage location.
Now that Cogl supports offset viewports there is a simpler way...
When we come to render the source actor to our offscreen draw buffer we
now copy the projection matrix from the stage; we create a viewport
that's also the same size as the stage (though larger than the offscreen
draw buffer) and as before we apply the modelview transformations of
the source actors ancestry before painting it.
The only trick we need now is to offset the viewport according to the
transformed (to screen space) allocation of the source actor (something we
required previously too). We negatively offset the stage sized viewport
such that the smaller offscreen draw buffer is positioned to sit underneath
the source actor in stage coordinates.
To help keep clutter_texture_paint maintainable this splits out a big
chunk of standalone code that's responsible for updating the fbo when
clutter_texture_new_from_actor has been used.
When updating the FBO for a source actor (to support
clutter_texture_new_from_actor()) we used to simply set an offscreen draw
buffer to be current, paint the source actor and then explicitly set the
window to be current again. This precluded chaining texture_new_from_actor
though because updating another FBO associated with a source actor would end
up restoring the window as the current buffer instead of the previous
offscreen buffer. Now that we use Cogl's draw buffer stack; chaining
clutter_texture_new_from_actor() should be possible.
Before we call glViewport we need to convert Cogl viewport coordinates
(where the origin is defined to be top left) to OpenGL coordinates
(where the origin is defined to be bottom left)
We weren't considering that offscreen rendering is always upside down
and in this case Cogl coordinates == OpenGL coordinates.
Firstly this now uses the draw buffer height not the viewport height
when we need to perform a y = height - y conversion, since (as the
name suggests) we are dealing with window coordinates not viewport
coordinates.
Secondly this skips any conversion when the current draw buffer is an
offscreen draw buffer since offscreen rendering is always forced to be
upside down and in this case Cogl window coordinates == GL window
coordinates.
This new API takes advantage of the recently imported Mesa code to support
inverse matrix calculation. The matrix code keeps track (via internal
flags) of the transformations a matrix represents so that it can select an
optimized inversion function.
Note: although other aspects of the Cogl matrix API have followed a similar
style to Cairo's matrix API we haven't added a cogl_matrix_invert API
because the inverse of a CoglMatrix is actually cached as part of the
CoglMatrix structure meaning a destructive API like cogl_matrix_invert
doesn't let users take advantage of this caching design.
This adds a COGL_DEBUG=matrices debug option that can be used to trace all
matrix manipulation done using the Cogl API. This can be handy when you
break something in such a way that a trace is still comparable with a
previous working version since you can simply diff a log of the broken
version vs the working version to home in on the bug.
This pulls in code from Mesa to improve our matrix manipulation support. It
includes support for calculating the inverse of matrices based on top of a
matrix categorizing system that allows optimizing certain matrix types.
(the main thing we were after) but also adds some optimisations for
rotations.
Changes compared to the original code from Mesa:
- Coding style is consistent with the rest of Cogl
- Instead of allocating matrix->m and matrix->inv using malloc, our public
CoglMatrix typedef is large enough to directly contain the matrix, its
inverse, a type and a set of flags.
- Instead of having a _math_matrix_analyse which updates the type, flags and
inverse, we have _math_matrix_update_inverse which essentially does the
same thing (internally making use of _math_matrix_update_type_and_flags())
but with additional guards in place to bail out when the inverse matrix is
still valid.
- When initializing a matrix with the identity matrix we don't immediately
initialize the inverse matrix; rather we just set the dirty flag for the
inverse (since it's likely the user won't request the inverse of the
identity matrix)
Because Cogl defines the origin for texture as top left and offscreen draw
buffers can be used to render to textures, we (internally) force all
offscreen rendering to be upside down. (because OpenGL defines the origin
to be bottom left)
By forcing the users scene to be rendered upside down though we also reverse
the winding order of all the drawn triangles which may interfere with the
users use of backface culling. This patch ensures that we reverse the
winding order for a front face (if culling is in use) while rendering
offscreen so we don't conflict with the users back face culling.
The debugging function read_pixels_to_file() and _clutter_do_pick were both
directly calling glReadPixels, but we don't wan't Clutter making direct
OpenGL calls and Cogl provides a suitable alternative. It also means
read_pixels_to_file() doesn't need to manually flip the data read due to
differences in Clutter/Cogl coordinate systems.
Technically this change shouldn't make a difference since we are
calling glReadPixels with GL_RGBA GL_UNSIGNED_BYTE which is a 4
byte format and it should always result in the same value according
to how OpenGL calculates the location of sequential rows.
i.e. k = a/s * ceil(snl/a) where:
a = alignment
s = component size (1)
n = number of components per pixel (4)
l = number of pixels in a row
gives:
k = 4/1 * ceil(4l/4) and k = 1/1 * ceil(4l/1) which are equivalent
I'm changing it because I've seen i915 driver code that bails out of
hardware accelerated paths if the alignment isn't 1, and because
conceptually we have no alignment constraints here so even if the current
value has no effect, when we start reading back other formats it may upset
things.
We were previously calling cogl_flush() after setting up the glPixelStore
state for calling glReadPixels, but flushing the journal could itself
change the glPixelStore state.
Since offscreen rendering is forced to be upside down we don't need to do
any conversion of the users coordinates to go from Cogl window coordinates
to OpenGL window coordinates.
Since we do all offscreen rendering upside down (so that we can have the
origin for texture coordinates be the top left of textures for the cases
where offscreen draw buffers are bound to textures) we don't need to flip
data read back from an offscreen framebuffer before we we return it to the
user.
I was originally expecting the code not to handle offset viewports or
viewports with a different size to the framebuffer, but it turns out the
code worked fine. In the process though I think I made the code slightly
more readable.
cogl_viewport only accepted a viewport width and height, but there are times
when it's also desireable to have a viewport offset so that a scene can be
translated after projection but before hitting the framebuffer.
Because Cogl defines the origin of viewport and window coordinates to be
top-left it always needs to know the size of the current window so that Cogl
window/viewport coordinates can be transformed into OpenGL coordinates.
This also fixes cogl_read_pixels to use the current draw buffer height
instead of the viewport height to determine the OpenGL y coordinate to use
for glReadPixels.
First a few notes about Cogl coordinate systems:
- Cogl defines the window origin, viewport origin and texture coordinates
origin to be top left unlike OpenGL which defines them as bottom left.
- Cogl defines the modelview and projection identity matrices in exactly the
same way as OpenGL.
- I.e. we believe that for 2D centric constructs: windows/framebuffers,
viewports and textures developers are more used to dealing with a top left
origin, but when modeling objects in 3D; an origin at the center with y
going up is quite natural.
The way Cogl handles textures is by uploading data upside down in OpenGL
terms so that bottom left becomes top left. (Note: This also has the
benefit that we don't need to flip the data we get from image decoding
libraries since they typically also consider top left to be the image
origin.)
The viewport and window coords are mostly handled with various y =
height - y tweaks before we pass y coordinates to OpenGL.
Generally speaking though the handling of coordinate spaces in Cogl is a bit
fragile. I guess partly because none of it was design to be, it just
evolved from how Clutter defines its coordinates without much consideration
or testing. I hope to improve this over a number of commits; starting here.
This commit deals with the fact that offscreen draw buffers may be bound to
textures but we don't "upload" the texture data upside down, and so if you
texture from an offscreen draw buffer you need to manually flip the texture
coordinates to get it the right way around. We now force offscreen
rendering to be flipped upside down by tweaking the projection matrix right
before we submit it to OpenGL to scale y by -1. The tweak is entirely
hidden from the user such that if you call cogl_get_projection you will not
see this scale.
We were ignoring the possibility that the current modelview matrix may flip
the incoming rectangle in which case we didn't calculate a valid scissor
rectangle for clipping.
This fixes: http://bugzilla.o-hand.com/show_bug.cgi?id=1809
(Clipping doesn't work within an FBO)
Cogl's support for offscreen rendering was originally written just to support
the clutter_texture_new_from_actor API and due to lack of documentation and
several confusing - non orthogonal - side effects of using the API it wasn't
really possible to use directly.
This commit does a number of things:
- It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h}
files instead which should be easier to maintain.
- internally CoglFbo objects are now called CoglDrawBuffers. A
CoglDrawBuffer is an abstract base class that is inherited from to
implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw
buffers will initially be used to support the
cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will
start to be used internally to represent windows as we aim to migrate some
of Clutter's backend code to Cogl.
- It makes draw buffer objects the owners of the following state:
- viewport
- projection matrix stack
- modelview matrix stack
- clip state
(This means when you switch between draw buffers you will automatically be
switching to their associated viewport, matrix and clip state)
Aside from hopefully making cogl_offscreen_new_to_texture be more useful
short term by having simpler and well defined semantics for
cogl_set_draw_buffer, as mentioned above this is the first step for a couple
of other things:
- Its a step toward moving ownership for windows down from Clutter backends
into Cogl, by (internally at least) introducing the CoglOnscreen draw
buffer. Note: the plan is that cogl_set_draw_buffer will accept on or
offscreen draw buffer handles, and the "target" argument will become
redundant since we will instead query the type of the given draw buffer
handle.
- Because we have a common type for on and offscreen framebuffers we can
provide a unified API for framebuffer management. Things like:
- blitting between buffers
- managing ancillary buffers (e.g. attaching depth and stencil buffers)
- size requisition
- clearing
This ensures that glViewport is called before the first stage paint.
Previously _clutter_stage_maybe_setup_viewport (which is done before we
start painting) was bailing out without calling cogl_setup_viewport because
the CLUTTER_STAGE_IN_RESIZE flag may be set if the stage was resized before
the first paint. (NB: The CLUTTER_STAGE_IN_RESIZE flag isn't removed until
we get an explicit event back from the X server since the window manager may
choose to deny/alter the resize.)
We now special case the first resize - where the viewport hasn't previously
been initialized and use the requested geometry to initialize the
glViewport without waiting for a reply from the server.
Over time the two cogl-fbo.c files have needlessly diverged as bug fixes or
cleanups went into one version but not the other. This tries to bring them
back in line with each other. It should actually be simple enough to move
cogl-fbo.c to be a common file, and simply not build it for GLES 1.1, so
maybe I'll follow up with such a patch soon.
The comment just said: "Some implementation require a clear before drawing
to an fbo. Luckily it is affected by scissor test." and did a scissored
clear, which is clearly a driver bug workaround, but for what driver? The
fact that it was copied into the gles backend (or vica versa is also
suspicious since it seems unlikely that the workaround is necessary for both
backends.)
We can easily restore the workaround with a better comment if this problem
really still exists on current drivers, but for now I'd rather minimize
hand-wavey workaround code that can't be tested.
Just like CLUTTER_CHECK_VERSION does version checking at compile
time, we need a way to verify the version of the library that we
are linking against. This is mostly needed for language bindings
and for run-time loadable modules -- when we'll get those.
Otherwise you can't use the alpha channel of the vertex colors unless
the material has a texture with alpha or the material's color has
alpha less than 255.
Apparently, on 64bit systems the floating point noise is enough
to screw up the float-to-int truncation.
The solution is to round up by 0.5 and then use floorf(). This
gives predictable and correct results on both 32bit and 64bit
systems.
When calling remove_child_meta() we check if there is a LayoutMeta
already attached to the Actor, and if that LayoutMeta matches the
(manager, container, actor) tuple. If the LayoutMeta does not match,
though, we create a new LayoutMeta instance -- in order to remove it
right afterwards.
Instead of doing this, we can simply check for a matching LayoutMeta
and if present, remove it.
In case of an existing, non-matching LayoutMeta, we're left with a
dangling instance, but it does not matter: the removal happens in the
unparenting phase of a ClutterContainer, so either the Actor will be
destroyed and thus the LayoutMeta will be disposed along with it; or
it will be parented to another container, and thus the LayoutMeta
will be replaced.
A ClutterBox might not have a ClutterLayoutManager instance
associated -- for instance, during destruction. We should check
for one before calling methods on it.
When cogl_texture_new_from_data() fails in clutter_texture_set_from_data()
and no GError is provided, the clutter app will segfault when dereferencing
the GError ** and emitting LOAD_FINISHED signal.
Based on a patch by: Haakon Sporsheim <haakon.sporsheim@gmail.com>
http://bugzilla.openedhand.com/show_bug.cgi?id=1806
Some changes to make COGL pass distcheck with Automake 1.11 and
anal-retentiveness turned up to 11.
The "major" change is the flattening of the winsys/ part of COGL,
which is built directly inside libclutter-cogl.la instead of an
intermediate libclutter-cogl-winsys.la object.
Ideally, the whole COGL should be flattened out using a
quasi-non-recursive Automake layout; unfortunately, the driver/
sub-section ships with identical targets and Automake cannot
distinguish GL and GLES objects.
If an actor calls directly or indirectly clutter_actor_queue_relayout()
on itself from within the allocate() implementation it will cause a
relayout cycle. This is usually a condition that should be checked by
ClutterActor and we should emit a warning if it is verified.
ClutterActor should check whether the current instance is being
destroyed and avoid performing operations like:
• queueing redraws
• queueing relayouts
It should also warn if the actor is being parented to an actor
currently being destroyed.
When showing a warning in the state checks we perform to verify that
the invariants are maintained when showing, mapping and realizing, we
should also print out the name of the actor failing the checks. If the
actor has no name, the GType name should be used as a fallback.
When defining an Alpha in ClutterScript we should allow setting
the alpha function by using a custom property. This makes it
possible to have both:
{
"id" : "behaviour-1",
"type" : "ClutterBehaviourDepth",
"alpha" : { "timeline" : "timeline-1", "function" : "alpha_func" },
...
}
And:
{
"id" : "alpha-1",
"type" : "ClutterAlpha",
"timeline" : "timeline-1",
"function" : "alpha_func"
},
{
"id" : "behaviour-1",
"type" : "ClutterBehaviourDepth",
"alpha" : "alpha-1",
...
}
The latter allows defining a single alpha function for multiple
behaviours.
The block that allows setting a GObject property holding an object
instance is conditionally depending on the USE_PIXBUF define. This
makes it impossible to reference an object inside ClutterScript on
platforms not using GdkPixbuf.
When an actor is hidden, the parent actor is not required to
size request or allocate it. (ClutterGroup does, but, for example,
NbtkBoxLayout doesn't.) This means that the
needs_width_request/needs_height_request/needs_allocate can be
stale when we go to show it again - they are set for the actor
but not the parent. Explicitly setting them to FALSE avoids
clutter_actor_relayout() improperly short-circuiting.
http://bugzilla.openedhand.com/show_bug.cgi?id=1831
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The change in commit 3bbc96e17e moved the
:text property setter to use set_text_internal(); this function does not
invalidate the Layout cache and does not queue a relayout, thus breaking
the behaviour of ClutterText when setting the contents of the actor using
the property.
http://bugzilla.openedhand.com/show_bug.cgi?id=1851
Since we no longer depend on the GL matrix API in Cogl we can remove a lot
of wrapper code from the GLES 2 backend. This is particularly nice given
that there was no code shared between the cogl-matrix-stack API and gles2
wrappers so we had a lot of duplicated logic.
The indirection through this API isn't necessary since we no longer
arbitrate between the OpenGL matrix API and Cogl's client side API. Also it
doesn't help to maintain an OpenGL style matrix mode API for internal use
since it's awkward to keep restoring the MODELVIEW mode and easy enough to
directly work with the matrix stacks of interest.
This replaces use of the _cogl_current_matrix API with direct use of the
_cogl_matrix_stack API. All the unused cogl_current_matrix API is removed
and the matrix utility code left in cogl-current-matrix.c was moved to
cogl.c.
This cache of the gl matrix mode lets us avoid repeat calls to glMatrixMode
in _cogl_matrix_stack_flush_to_gl when we have lots of sequential modelview
matrix modifications.
This goes a bit further than the previous patch, and as a special case
we now simply represent identity matrices using a boolean, and only
lazily initialize them when they need to be modified.
The journal always uses an identity matrix since it uses software
transformation. Currently it manually uses glLoadMatrix since previous
experimentation showed that the cogl-matrix-stack gave bad performance, but
it would be nice to fix performance so we only have to care about one path
for loading matrices.
For the common case where we do:
cogl_matrix_stack_push()
cogl_matrix_stack_load_identity()
we were effectively initializing the matrix 3 times. Once due to use of
g_slice_new0, then we had a cogl_matrix_init_identity in
_cogl_matrix_state_new for good measure, and then finally in
cogl_matrix_stack_load_identity we did another cogl_matrix_init_identity.
We don't use g_slice_new0 anymore, _cogl_matrix_state_new is documented as
not initializing the matrix (instead _cogl_matrix_stack_top_mutable now
takes a boolean to choose if new stack entries should be initialised) and so
we now only initialize once in cogl_matrix_stack_load_identity.
This relates back to an earlier commitment to stop using the OpenGL matrix
API which is considered deprecated. (ref 54159f5a1d)
The new texture matrix stacks are hung from a list of (internal only)
CoglTextureUnit structures which the CoglMaterial code internally references
via _cogl_get_texure_unit ().
So we would be left with only the cogl-matrix-stack code being responsible
for glMatrixMode, glLoadMatrix and glLoadIdentity this commit updates the
journal code so it now uses the matrix-stack API instead of GL directly.
• Fix list_stages() and peek_stages() documentation
• Fix clutter_text_set_preedit_string() arguments in the header
to match source and documentation
• Add clutter_units_cm() to the private section for Units
• Rename the LayoutManager section
• Add FlowLayout:homogeneous accessors
* layout-manager: (50 commits)
docs: Reword a link
layout, docs: Add more documentation to LayoutManager
layout, docs: Fix description of Bin properties
layout, bin: Use ceilf() instead of casting to int
layout, docs: Add long description for FlowLayout
layout, box: Clean up
layout, box: Write long description for Box
layout, docs: Remove unused functions
layout: Document BoxLayout
layout: Add BoxLayout, a single line layout manager
layout: Report the correct size of FlowLayout
layout: Resizing the stage resizes the FlowLayout box
layout: Use the get_request_mode() getter in BinLayout
layout: Change the request-mode along with the orientation
actor: Add set_request_mode() method
[layout] Remove FlowLayout:wrap
[layout] Rename BinLayout and FlowLayout interactive tests
[layout] Skip invisible children in FlowLayout
[layout] Clean up and document FlowLayout
[layout] Snap children of FlowLayout to column/row
...
The layout manager reference should have some documentation on how
to use a LayoutManager object inside a container and how to implement
a LayoutManager sub-class correctly.
The JSON conditional rules can be moved outside the introspection
conditional ones to avoid a nested check, as all the JSON rules do
is setting up variables that may or may not be used.
The Journal can be considered a standalone component, so even though
it's currently only used to log quads, it seems better to split it
out into its own file.
When we implement atlas textures we will probably want to use the spans API
to handle texture repeating so it doesn't make sense to leave the code in
cogl-texture-2d-sliced.c. Since it's a standalone set of data structures
and algorithms it also seems reasonable to split out from cogl-texture.
cogl-texture-2d-sliced provides an implementation of CoglTexture and this
seperation lays the foundation for potentially supporting atlas textures,
pixmap textures (as in GLX_EXT_texture_from_pixmap) and fast-path
GL_TEXTURE_{1D,2D,3D,RECTANGLE} textures in a maintainable fashion.
cogl-primitives.c was previously digging right into CoglTextures so it could
manually iterate the texture slices for texturing quads and polygons and
because we were missing some state getters we were lazily just poking into
the structures directly.
This adds some extra state getter functions, and adds a higher level
_cogl_texture_foreach_slice () API that hopefully simplifies the way in
which sliced textures may be used to render primitives. This lets you
specify a rectangle in "virtual" texture coords and it will call a given
callback for each slice that intersects that rectangle giving the virtual
coords of the current slice and corresponding "real" texture coordinates for
the underlying gl texture.
At the same time a noteable bug in how we previously iterated sliced
textures was fixed, whereby we weren't correctly handling inverted texture
coordinates. E.g. with the previous code if you supplied texture coords of
tx1=100,ty1=0,tx2=0,ty2=100 (inverted along y axis) that would result in a
back-facing quad, which could be discarded if using back-face culling.
The descriptions for gl_handle and gl_target were inverted.
Thanks to Young-Ho Cha for spotting that.
Signed-off-by: Robert Bragg <robert@linux.intel.com>
As part of an incremental process to have Cogl be a standalone project we
want to re-consider how we organise the Cogl source code.
Currently this is the structure I'm aiming for:
cogl/
cogl/
<put common source here>
winsys/
cogl-glx.c
cogl-wgl.c
driver/
gl/
gles/
os/ ?
utils/
cogl-fixed
cogl-matrix-stack?
cogl-journal?
cogl-primitives?
pango/
The new winsys component is a starting point for migrating window system
code (i.e. x11,glx,wgl,osx,egl etc) from Clutter to Cogl.
The utils/ and pango/ directories aren't added by this commit, but they are
noted because I plan to add them soon.
Overview of the planned structure:
* The winsys/ API is the API that binds OpenGL to a specific window system,
be that X11 or win32 etc. Example are glx, wgl and egl. Much of the logic
under clutter/{glx,osx,win32 etc} should migrate here.
* Note there is also the idea of a winsys-base that may represent a window
system for which there are multiple winsys APIs. An example of this is
x11, since glx and egl may both be used with x11. (currently only Clutter
has the idea of a winsys-base)
* The driver/ represents a specific varient of OpenGL. Currently we have "gl"
representing OpenGL 1.4-2.1 (mostly fixed function) and "gles" representing
GLES 1.1 (fixed funciton) and 2.0 (fully shader based)
* Everything under cogl/ should fundamentally be supporting access to the
GPU. Essentially Cogl's most basic requirement is to provide a nice GPU
Graphics API and drawing a line between this and the utility functionality
we add to support Clutter should help keep this lean and maintainable.
* Code under utils/ as suggested builds on cogl/ adding more convenient
APIs or mechanism to optimize special cases. Broadly speaking you can
compare cogl/ to OpenGL and utils/ to GLU.
* clutter/pango will be moved to clutter/cogl/pango
How some of the internal configure.ac/pkg-config terminology has changed:
backendextra -> CLUTTER_WINSYS_BASE # e.g. "x11"
backendextralib -> CLUTTER_WINSYS_BASE_LIB # e.g. "x11/libclutter-x11.la"
clutterbackend -> {CLUTTER,COGL}_WINSYS # e.g. "glx"
CLUTTER_FLAVOUR -> {CLUTTER,COGL}_WINSYS
clutterbackendlib -> CLUTTER_WINSYS_LIB
CLUTTER_COGL -> COGL_DRIVER # e.g. "gl"
Note: The CLUTTER_FLAVOUR and CLUTTER_COGL defines are kept for apps
As the first thing to take advantage of the new winsys component in Cogl;
cogl_get_proc_address() has been moved from cogl/{gl,gles}/cogl.c into
cogl/common/cogl.c and this common implementation first trys
_cogl_winsys_get_proc_address() but if that fails then it falls back to
gmodule.
This moves most of cogl-context.{c.h} to cogl/common with some driver
specific members now living in a CoglContextDriver struct. Driver specific
context initialization and typedefs now live in
cogl/{gl,gles}/cogl-context-driver.{c,h}
Driver specific members can be found under ctx->drv.stuff
This splits the limited components that differed between
cogl/{gl,gles}/cogl-texture.c into new {gl,gles}/cogl-texture-driver.c files
and the rest that can now be shared into cogl/common/cogl-texture.c
Most of clutter_stage_egl_realize was renamed to
_clutter_stage_egl_try_realize which now takes a cookie indicating which
fallback number should tried next. clutter_stage_egl_realize now keeps
trying to realize with successive fallback numbers until it succeeds or runs
out of fallbacks.
The only fallback supported for now is for hardware with no stencil buffer
support.
This replaces calls to the old (glx 1.2) functions glXChooseVisual,
glXCreateContext, glXMakeCurrent with the 1.3+ fbconfig varients
glXChooseFBConfig, glXCreateNewContext, glXMakeContextCurrent.
The only backend that tried to implement offscreen stages was the GLX backend
and even this has apparently be broken for some time without anyone noticing.
The property still remains and since the property already clearly states that
it may not work I don't expect anyone to notice.
This simplifies quite a bit of the GLX code which is very desireable from the
POV that we want to start migrating window system code down to Cogl and the
simpler the code is the more straight forward this work will be.
In the future when Cogl has a nicely designed API for framebuffer objects then
re-implementing offscreen stages cleanly for *all* backends should be quite
straightforward.
for the marshal files $(srcdir) was getting prefixed twice since my last
commit (2cc88f1140) since it was already being prefixed including
Makefile.am. The problem with prefixing it in the includer file though is
that the Make variable substitutions like :.list=.h mean we end up
generating into the $(srcdir). This removes the prefix added in
clutter/Makefile.am
We were also missing a $(srcdir) prefix when setting EXTRA_DIST
When validating a new GValue against the ClutterParamSpecUnits, we issue
a warning when the units do not match with both the new value and the
unit we expect to have. Unfortunately we were printing the unit of the
new value twice and not the unit of the ParamSpec.
http://bugzilla.openedhand.com/show_bug.cgi?id=1846
This is really useful when trying to animate GTypes that haven't
registered any progress function. Instead of silently not working it
will warn the developer.
http://bugzilla.openedhand.com/show_bug.cgi?id=1845
To be able to animate CLUTTER_TYPE_UNITS properties we need to register
the GType and its progress function against the ClutterInterval code.
The two ClutterUnits defining the interval can use different units, the
resulting unit will always be in pixels, so calculating a progress
between 10px and 4cm is valid.
http://bugzilla.openedhand.com/show_bug.cgi?id=1844
When computing the pixels value of a ClutterUnits value we should
be caching the value to avoid recomputing for every call of
clutter_units_to_pixels(). We already have a flag telling us to
return the cached value, but we miss the mechanism to evict the
cache whenever the Backend settings affecting the conversion, that
is default font and resolution, change.
In order to implement the eviction we can use a "serial"; the
Backend will have an internal serial field which we retrieve and
put inside the ClutterUnits structure (we split one of the two
64 bit padding fields into two 32 bit fields to maintain ABI); every
time we call clutter_units_to_pixels() we compare the units serial
with that of the Backend; if they match and pixels_set is set to
TRUE then we just return the stored pixels value. If the serials
do not match then we unset the pixels_set flag and recompute the
pixels value.
We can verify this by adding a simple test unit checking that
by changing the resolution of ClutterBackend we get different
pixel values for 1 em.
http://bugzilla.openedhand.com/show_bug.cgi?id=1843
Input Methods require to be able to set a "pre-edit string", that is
a string that it's just displayed into the Text actor without being
committed to the actor's buffer. The string might require custom Pango
attributes, and an update of the cursor position.
Casting a float to int to truncate it before assigning the value
to a float again is wrong. We should use ceilf() instead which
does what we want to achieve (rounding up the size to avoid
sub-pixel positioning of children).
* Use g_list_foreach() instead of iterating over the list inside
the destruction sequence, since we are causing the widgets to be
implicitly removed from the list via the destroy() call.
* Use g_signal_connect_swapped() and spare us from a callback.
FlowLayout should compute the correct height for the assigned width when
in horizontal flow, and the correct width for the assigned height when
in vertical flow. This means pre-computing the number of lines inside
the get_preferred_width() and get_preferred_height(). We can then cache
the computed column width and row height, cache them inside the layout
and then use them when allocating the children.
When changing the orientation of a FlowLayout, the associated
container should also change its request mode. A horizontally
flowing layout has a height depending on the width, since it
will reflow vertically; similarly, a vertically reflowing layout
will have a width depending on the height.
The :wrap property is not implemented, and mostly useless: the
FlowLayout is a reflowing grid. This means that if it receives
less than the preferred width or height in the flow direction
then it should always reflow.
Use the column and row size to align each child; with :homogeneous
set to TRUE, or with children with the same size, the FlowLayout
will behave like a reflowing grid.
FlowLayout is a layout manager that arranges its children in a
reflowing line; the orientation controls the major axis for the
layout: horizontal, for reflow on the Y axis, and vertical, for
reflow on the X axis.
The BinLayout should store a pointer to the Container that it is
using it as the layout manager.
This allows us to fix the API and drop the additional Container
arguments from set_alignment() and get_alignment().
This also allows us to add a ClutterBinLayout::add() method which
adds an actor and sets the alignment policies without dealing with
variadic arguments functions and GValue (de)marshalling.
Use the LayoutManager API to set a back pointer to the Box actor
inside the LayoutManager used by the box.
This also allows us to replace the LayoutManager on a Box, since
the LayoutManager will be able to replace all the metadata if
needed.
The LayoutManager implementation might opt to take a back pointer
to the Container that is using the layout instance; this allows
direct access to the container itself from within the implementation.
The ClutterBox::add method is a simple wrapper around the Container
add_actor() method and the LayoutManager layout properties API. It
allows adding an actor to a Box and setting the layout properties in
one call.
If the LayoutManager used by the Box does not support layout properties
then the add() method short-circuits out.
Along with the varargs version of the method there's also a vector-based
variant, for language bindings to use.
Instead of overloading ClutterChildMeta with both container and layout
metadata and delegate to every LayoutManager implementation to keep a
backpointer to the layout manager instance, we can simply subclass
ChildMeta into LayoutMeta and presto! everything works out pretty well
for everyone.
Each actor managed by a BinLayout policy should reside inside its
own "layer", with horizontal and vertical alignment. The :x-align
and :y-align properties of the BinLayout are the default alignment
policies, which are copied to each new "layer" when it is created.
The set_alignment() and get_alignment() methods of BinLayout can
be changed to operate on a specific "layer".
The whole machinery uses the new ChildMeta support inside the
LayoutManager base abstract class.
The ChildMeta object is a storage for child-container properties,
that is properties that exist only when an actor is inside a specific
container. The LayoutManager delegate class should also have
layout-specific properties -- so, for this job, we can "recycle"
ChildMeta as the storage.
Emit the ::layout-changed when the BinLayout alignment policies change.
This will result in a queue_relayout() on the containers using the
BinLayout layout manager.
* Use ::layout-changed to queue a relayout when the layout changes
* Destroy the Box children when destroying the Box
* Allow getting the layout manager from the Box
If a sub-class of LayoutManager wishes to implement a parametrized
layout policy it also needs a way to notify the container using the
layout manager that the layout has changed. We cannot do it directly
and automatically from the LayoutManager because a) it has no back
link to the actor that it is using it and b) it can be attached to
multiple actors.
This is a job for <cue raising dramatic music> signals!
By adding ClutterLayoutManager::layout-changed (and its relative
emitted function) we can notify actors using the layout manager that
the layout parameters have been changed, and thus they should queue
a relayout.
A BinLayout is a simple layout manager that allocates a single cell,
providing alignment on both the horizontal and vertical axis.
If the container associated to the BinLayout has more than one child,
the preferred size returned by the layout manager will be as big as
the maximum of the children preferred sizes; the allocation will be
applied to all children - but it will still depend on each child
preferred size and the BinLayout horizontal and vertical alignment
properties.
The supported alignment properties are:
* center: align the child by centering it
* start: align the child at the top or left border of the layout
* end: align the child at the bottom or right border of the layout
* fill: expand the child to fill the size of the layout
* fixed: let the child position itself
A layout manager instance makes only sense if it's owned by a
container. For this reason, it should have a floating reference
instead of a full reference on construction; this allows constructing
Boxes like:
box = clutter_box_new (clutter_fixed_layout_new ());
without leaking the layout manager instance.
The LayoutManager class is an abstract proxy for the size requesition
and size allocation process in ClutterActor.
A ClutterLayoutManager sub-class must implement get_preferred_width(),
get_preferred_height() and allocate(); a ClutterContainer using the
LayoutManager API will then proxy the corresponding Actor virtual
functions to the LayoutManager instance. This allows having a generic
"blank" ClutterActor sub-class, implementing the ClutterContainer
interface, which leaves only the layout management implementation to
the application developers.
The rules to create signal marshallers and enumeration GTypes are
usually copied and pasted all over different projects, though they
are pretty generic and, given a little bit of parametrization, can
be put in separate Makefile.am files and included whenever needed.
The set_default_stage() method of StageManager should not be used
by application code; technically, nothing in Clutter uses it, and
StageManager's API is not considered public anyway.
The IN_DESTRUCTION flag is set around the unrealization and disposal of
the actor in clutter_actor_destroy() but is never unset (it's set twice
instead).
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Currently, setting the :text property has the side-effect of
setting the :use-markup property to FALSE. This prevents
constructing a Text actor, or setting its properties, like:
g_object_set (text,
"use-markup", TRUE,
"text", some_string,
NULL);
as the ordering becomes important. Unfortunately, the ordering
of the properties cannot be enforced with ClutterScript or
with language bindings.
The documentation of the clutter_text_set_text() method should
be expanded to properly specify that the set_text() method will
change the :use-markup property to FALSE as a side effect.
Transform functions allow the use of g_value_transform() to cast
GValues. It's very handy to have casts to and from G_TYPE_STRING as it
allows generic serialization and parsing of GTypes.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Current parsing of units has a number of shortcomings:
* a number followed by trailing space (without any unit specified) was
not recognized,
* "5 emeralds" was parsed as 5em,
* the way we parse the digits after the separator makes us lose
precision for no good reason (5.0 is parsed as 5.00010014...f which
makes g_assert_cmpfloat() fail)
Let's define a stricter grammar we can recognize and try to do so. The
description is in EBNF form, removing the optional <> which is a pain
when having to write DocBook, and using '' for the terminal symbols.
Last step, add more ClutterUnits unit test to get a better coverage of
the grammar we want to parse.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Parse #rgb and #rrggbb in addition to forms with the alpha channel
specified. This allows conversion of colour strings from documents such as
CSS where the alpha channel is not specified when using '#' notation.
This patch also adds the relevant conformance test.
Parse #rgb and #rrggbb in addition to forms with the alpha channel
specified. This allows conversion of colour strings from documents such as
CSS where the alpha channel is not specified when using '#' notation.
gdk is an optional clutter dependency, so the pick buffer debugging option
needs some guards so we don't break, for example, the OSX builds. This also
adds a comment for the bit fiddling done on the pick colors used to ensure
the pick colors are more distinguished while debugging. (we swap the
nibbles of each color component so that pick buffers don't just look black.)
ClutterGroup previously calculated the size as the distance from the
left edge of the leftmost child to the right edge of the rightmost
child except if there were any chidren left of the origin then the
left edge would be zero.
However the group is always allocated its size relative to its
origin so if all of the children are to the right of the origin then
the preferred size would not be large enough to reach the rightmost
child.
origin
┼──────────┐
│Group │
│ ┌────────┼─┐
│ │Child │ │
│ │ │ │
└─┼────────┘ │
│ │
└──────────┘
group size
╟──────────╢
This patch makes it so the size is always just the rightmost edge.
origin
┼────────────┐
│Group │
│ ┌──────────┤
│ │Child │
│ │ │
│ │ │
│ │ │
└─┴──────────┘
group size
╟────────────╢
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1825
Since the Great Rework of ClutterUnits, functions have been using
'units' not 'unit' in their name. clutter_value_get_unit() is a left
over from a dark age, its declaration and documentation have been
updated but not the symbol itself.
Instead of having an assertion failure with a message of dubious
usefulness, we should probably use a more verbose warning explaining
what is the problem and what might be the cause.
The user-initiated resize is conflicting with the allocated size. This
happens because we change the size of the stage's X Window behind the
back of the size allocation machinery.
Instead, we should change the size of the actor whenever we receive a
ConfigureNotify event to reflect the new size of the actor.
We force the redraw before mapping, in the hope that when a composited
window manager maps the window it will have its contents ready; that is
not going to work: the solution for this problem requires the implementation
of a protocol for compositors, and not a hack.
Moreover, painting before mapping will cause a paint with the wrong
GL viewport size, which is the wrong thing to do on GLX.
When not building a debug build the compiler was warning about empty
else clauses with no braces due to code like:
if (blah)
do_foo();
else
COGL_NOTE (DRAW, "a-wibble");
This simply ensures that even for non debug builds COGL_NOTE will expand to
a single statement.
glVertexPointer expects positions with 2, 3 or 4 components, glColorPointer
expects colors with 3 or 4 components and glNormalPointer expects normals
with three components so when adding vertex buffer atributes with the names
"gl_Vertex", "gl_Color" or "gl_Normal" we assert these constraints and print
an explanation to the developer if not met.
This also fixes the previosly incorrect constraint that gl_Normal attributes
must have n_components == 1; thanks to Cat Sidhe for reporting this:
Bug: http://bugzilla.openedhand.com/show_bug.cgi?id=1819
Now if you export CLUTTER_DEBUG=dump-pick-buffers clutter will write out a
png, e.g. pick-buffer-00000.png, each time _clutter_to_pick() is called.
It's a rather crude way to debug the picking (realtime visualization in a
second stage would probably be nicer) but it we've used this approach
successfully numerous times when debugging Clutter picking issues so it
makes sense to have a debug option for it.
It looks like the intention was to duplicate an XVisualInfo in such a way
that the pointer could be returned and then later freed using XFree. But
Xalloc isn't an Xlib counterpart to XFree; Xlib doesn't provide a general
purpose malloc wrapper afik. By shuffling things about a bit, it was
possible to avoid the need for this hack.
By default, float * is considered as an out argument by gobject
introspection which is wrong for quite a few Cogl symbols. Start adding
annotations to fix that for the ones in the "Primitives" gtk-doc
section.
In the default implementation of container::destroy_child_meta Set child
meta qdata to NULL on the child and not the container, since the child
is the object that owns the data.
The lifetime of the journal VBO is entirely within the scope of the
cogl_journal_flush function so there is no need to store it globally
in the Cogl context. Instead, upload_vertices_to_vbo just returns the
new VBO. cogl_journal_flush stores this in a local variable and
destroys it before returning.
This also fixes an assertion when using the GLES backend which was
caused by nothing initialising the journal_vbo variable.
If the system clock rolls back between two frames then we need
to account for the change, to avoid stopping the timeline.
The best option, since a roll back can be any arbitrary amount
of milliseconds, is to skip a frame.
Fixes bug:
http://bugzilla.moblin.org/show_bug.cgi?id=3839
The framebuffer_object spec isn't clear in defining whether attaching a
texture as a renderbuffer with mipmap filtering enabled while the mipmaps
have not been uploaded should result in an incomplete framebuffer object.
(different drivers make different decisions)
To avoid an error with drivers that do consider this a problem we explicitly
set non mipmapped filters before calling glCheckFramebufferStatusEXT. The
filters will later be reset when the texture is actually used for rendering
according to the filters set on the corresponding CoglMaterial.
Since an actor can only be parented to one container we don't need
the extra complications of maintaining a list of ChildMeta objects
attached to an actor in the default implementation of the Container
interface.
Instead of using ClutterActor for the base class of the Stage
implementation we should extend the StageWindow interface with
the required bits (geometry, realization) and use a simple object
class.
This require a wee bit of changes across Backend, Stage and
StageWindow, even though it's mostly re-shuffling.
First of all, StageWindow should get new virtual functions:
* geometry:
- resize()
- get_geometry()
* realization
- realize()
- unrealize()
This covers all the bits that we use from ClutterActor currently
inside the stage implementations.
The ClutterBackend::create_stage() virtual function should create
a StageWindow, and not an Actor (it should always have been; the
fact that it returned an Actor was a leak of the black magic going
on underneath). Since we never guaranteed ABI compatibility for
the Backend class, this is not a problem.
Internally to ClutterStage we can finally drop the shenanigans of
setting/unsetting actor flags on the implementation: if the realization
succeeds, for instance, we set the REALIZED flag on the Stage and
we're done.
As an initial proof of concept, the X11 and GLX stage implementations
have been ported to the New World Order(tm) and show no regressions.
The old code checked whether the property began with 'signal-' and
then checked for 'signal-swapped' and 'signal-after'. This prevented
you from animating a property called for example 'signal-strength'.
The check for the prefix is now in a separate function which also adds
a 'signal-swapped-after' prefix for completeness.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1798
The blend string compiler checks that the syntax of a function name is
[A-Za-z_]*, preventing the use of DOT3_RGB[A].
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The column names are optional - ClutterModel will use the GType name
if there is no user-specified column name. Hence, the ::finalize vfunc
should not try to free an empty column names vector.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1790
The default floating point type for JSON is double precision; this means
that we need to conver to single precision when setting a property with
type G_TYPE_FLOAT.
Currently, to update a property inside an animation you have to
get the interval for that property and then call the set_final_value()
method.
We can provide a simpler, bind()-like method for the convenience of
the developers that just validates everything and then calls the
Interval.set_final_value().
Right now we just check for a NULL stage before calling glXMakeCurrent().
We can, though, get a valid stage without an implementation attached to
it while we are disposing a stage after a CLUTTER_DELETE event, since the
events processing is performed on a vblank-locked basis.
ClutterClone bases its preferred size on the preferred size of
the source actor, so it needs to invalid its cached preferred
size when the preferred size of the source actor changes.
In order for this to work, we need to have notification when
the size of the source actor changes, so add a ::queue-relayout
signal to ClutterActor.
Then connect to this from ClutterClone and queue a relayout
on the clone when a relayout is queued on the source.
http://bugzilla.openedhand.com/show_bug.cgi?id=1755
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This reverts commit 3c47a3beb5.
Of course I remembered just after pushing the patch why we hadn't done
this before :-) If you look in the glsl spec:
http://www.khronos.org/registry/gles/specs/2.0/es_full_spec_2.0.24.pdf
Section 3.7.10 Texture Completeness and Non-Power-Of-Two Textures
you can see GLES 2.0 doesn't support mipmaps for npot textures.
There is possibly some way we could support this in Cogl but at least
it's not as simple as or-ing in the feature flag, sadly.
The core GLES2 API supports NPOT textures, i.e. there is no extension as for
OpenGL, so we now add COGL_FEATURE_TEXTURE_NPOT to the feature flags in
_cogl_features_init.
Thanks to Gordon Williams for spotting this.
Don't let stringify.sh write to the $srcdir + use the BUILT_SOURCES var in
Makefile.am so as to ensure all .c. and .h files get generated from their
corresponding .glsl files before building other targets.
If the timeline is running backwards, the completed signal handler should
set the final state from the interval's initial value.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When rendering a glyph run from a texture we were premultiplying the
colour once in display_list_render() and then again in
display_list_render_texture(). This was causing the color to come out
wrong. This fixes bug #1775.
Thanks to Pierre-Luc Beaudoin for reporting.
The wrong part of an expression was bracketed in the test to determine
when a new texture matrix needed to be loaded which resulted in the
first pass through _cogl_material_layer_flush_gl_sampler_state
not uploading any user matrix.
clutter_text_move_word_backward/forward() calls did not use the
start argument consistently. Also, clutter_text_move_word_forward()
bound check checked the wrong end.
Fixes#1765
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When a letter key is pressed with the control key held down one of
three things will happen :-
a) If the stage is embedded within a GtkClutterEmbed the unicode value
will be filled from gdk_keyval_to_unicode. This will be the same
value as if control was not pressed (so Ctrl+V will be 'v').
b) If the stage is not in a GtkClutterEmbed and Clutter is running on
the X11 backend then it will try to fill in the unicode value from
XLookupString. This *will* take into account the control so the
unicode value will represent a control character (Ctrl+V will be
'\x16').
c) Most other backends will not bother to fill in the unicode
value. Therefore clutter_keysym_to_unicode will be used which also
does not take into account the control key (so Ctrl+V will be 'v').
For cut and paste to work in Nbtk, the control keys need to bubble up
to the parent NbtkEntry container. This works fine for 'b' but not 'a'
and 'c'.
This patch makes ClutterText always allow the event to bubble if the
key is not handled by the binding pool and the control modifier is
down.
Ideally ClutterText would always get a unicode value that takes into
account the modifiers but this is probably best left up to the input
methods.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
g-ir-compiler currently opens the library for the .gir it is compiling;
to make that work we need to set LD_LIBRARY_PATH before running
g-ir-compiler to include .libs.
(I think this may have been working earlier because there was a
hack that substituted .so with .la and tried opening that; that
works for the incorrect libclutter-glx-1.0.so but not for the
correct libclutter-glx-1.0.so.0)
http://bugzilla.openedhand.com/show_bug.cgi?id=1771
Update the sed hack for the shared library to be more robust.
Remove the --shared-library command line argument from g-ir-scanner,
as no distribution will ever ship the .la files. This effectively
reverts commit 68f8a98cfb.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Use the --shared-library option to specify the shared object to link
against when compiling the typelib from the GIR data.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Following bug #1762, the syntax of g-ir-scanner was changed in
gobject-introspection, so Clutter does not build anymore with 0.6.4.
See the bugzilla bug:
http://bugzilla.gnome.org/show_bug.cgi?id=591669
GObject-Introspection now uses a different mechanism to extract the
SONAME when building the gir file and it needs the libtool archive as
option.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When dumping a ClutterUnits structure to a string we are using a bare
g_strdup_printf(), which unfortunately is locale dependant. So, for
instance, a type of CLUTTER_UNIT_EM and a value of 42 are stringified
as:
C: 42.00 em
en_GB 42.00 em
it_IT 42,00 em
fr_FR 42,00 em
This would not be a problem -- clutter_units_from_string() allows both
'.' and ',' as fractionary part delimiters. The test suite, on the
other hand, does not know that, and it checks for exact matches with
the C locale.
Calling setlocale(LC_ALL,"C") at the beginning of the conformance test
suite is not a good idea, because it would prevent external testing; and
it's a lame cop out from doing exactly what we have to do -- pick a format
and stick with it.
Like other platforms, languages and frameworks before us, we opt to
be less liberal in what we create; so, we choose to always stringify
ClutterUnits with fractionary parts using '.' as the delimiter.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1763
Clutter advertises itself on X11 as implementing the _NET_WM_PING protocol,
which is needed to be able to detect frozen applications; this allows us to
stop the destruction of the stage by blocking the CLUTTER_DELETE event and
wait for user feedback without the Window Manager thinking that the app has
gone unresponsive.
In order to implement the _NET_WM_PING protocol properly, though, we need
to add the _NET_WM_PID property on the Stage window, since the EWMH states:
[_NET_WM_PID] MAY be used by the Window Manager to kill windows which
do not respond to the _NET_WM_PING protocol.
Meaning that an unresponsive Clutter application might not be killable by
the window manager.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1748
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
* Do _not_ use CLUTTER_MAJORMINOR to define the installation path
for the headers; we must use CLUTTER_API_VERSION for that.
* Do not put the C compiler flags in the INCLUDES directive.
Bases on a patch by: Gary Ching-Pang Lin <glin@novell.com>
It is possible to unset the size of an actor specified with set_width()
and set_height() by using:
clutter_actor_set_size (actor, -1, -1);
Which works by unsetting the :min-*-set and the :natural-*-set properties.
Calling set_width(-1) and set_height(-1) separately, though, doesn't work
thus implicitly breaking the assumption that set_size() is nothing more
than set_width()+set_height(). This was obviously due to the face that
pre-1.0 set_width() and set_height() took an unsigned integer as an
argument.
ClutterActor parses positional and dimensional properties with a
custom deserializer. We need to:
- handle G_TYPE_INT64, the default integer type for JSON-GLib
- use G_TYPE_FLOAT for properties, since Actor switched to it
for the pixel-based ones
This makes ClutterScript work again.
The json-types.h header is found by the mere fact of it being
in the project; if we are compiling against the system JSON-GLib
this could be horribly out of date.
We need to use clutter-json.h, which will include the right
header for us.
JSON-GLib moved to a single include scheme, so we should only include
json-glib.h. If we use the internal copy it doesn't matter, since the
header does the right thing.
The clutter-script-parser.c does not have a copyright and license
notices; even though the LGPL is a per-project license and not a
per-file license, having those notices in every source file is a
good idea.
The OS X backend Makefile.am was missing a line concatenation, and
so the -xobjective-c directive was always ignored.
Instead of dumping everything into INCLUDES and LDADD we should follow
what the rest of the backends do, and use per-target CFLAGS and LDADD,
and reserve the INCLUDES to -D and -I directives.
Thanks to: Christian Hergert <chris@dronelabs.com>
Don't install inside the clutter-MAJOR_MINOR/ directory, but use
the API_VERSION (1.0).
Otherwise we'd have the Clutter headers for 1.x inside:
$includedir/clutter-1.0/clutter
And the JSON-related headers inside:
$includedir/clutter-1.<minor>/clutter
The fix for bug 1750 inside commit b190448e made Clutter-GTK spew
BadWindow errors. The reason for that is that we call XDestroyWindow()
without checking if the old Window is None; this happens if we call
clutter_x11_set_stage_foreign() on a new ClutterStage before it has
been realized.
Since Clutter-GTK does not need to realize the Stage it is going to
embed anymore (the only reason for that was to obtain a proper Visual
but now there's ClutterBackendX11 API for that), the set_stage_foreign()
call is effectively setting the StageX11 Window for the first time.
When we replace the stage Window using a foreign one we also need to
destroy the Window we created, if needed, to avoid leaking resources
all around.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1750
The "catch all" warning for a the mapped invariant violation is too
generic: it doesn't tell you why the invariant was broken in case
we are trying to map an unparented actor - e.g. through a Clone.
The right gcc define is __GNUC__ not __GNUC_. This typo had the side
effect that we were using the non gcc specific debug macros leading to
a less optmised CLUTTER_NOTE () than one could have dreamed of.
The vertex that should be used by the apply_relative_transform
is the one passed in as const, and the result should be placed
inside the non-const ClutterVertext. Currently, we are using
the latter, and thus the function is completely useless.
We should follow the convention for boxed types initializers of:
<type_name>_from_<another_type> (boxed, value)
For ClutterUnits as well; so:
clutter_units_pixels -> clutter_units_from_pixels
clutter_units_em -> clutter_units_from_em
...
We should still keep the short-hand version as a macro, though.
This makes clutter_stage_win32_show/hide be implementations of
ClutterStageWindowIface rather than overriding the methods in
ClutterActor. This reflects the changes in e4ff24bc for the X11
backend.
In case we are skipping too many frames, we should force the animation
instance to apply the final state of the animated interval inside the
::completed signal handler.
The Stage:offscreen property hasn't been tested for ages, and it
should really just use a FBO, not indirect rendering on a X Pixmap
only on X11. There are better ways anyway to get the current
contents of ClutterStage as a buffer anyway.
We might remove it at any later date, or actually make it work
properly.
When requesting a GLX visual from the X server we should explicitly
set the GL_DEPTH_SIZE and the GL_ALPHA_SIZE bits, otherwise some
functionality might just not work, or work unreliably.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1723
The GValue wrappers for ClutterShader types should always store
values using GL types (GLfloat, GLint) internally, but give and
take generic C types (float, int) to the Clutter side.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1359
The HLS to RGB conversion in case the S value is zero is:
R = G = B = luminance
ClutterColor uses a byte (0 to 255) for the R, G and B channels
encoding, while luminance is expressed using a floating point value
in the closed interval [0, 1]; thus the case above becomes:
R = G = B = (luminance * 255)
The clutter_color_from_hls() code is missing the final step of
de-normalizing the luminance value, and so it breaks the roundtrip
colorspace conversion between RGB and HLS.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1695
If clutter_x11_texture_set_window() was called after
clutter_x11_texture_pixmap_set_automatic(), then the Damage object would
not be properly created so updates to the window were ignored.
Refactor creation of the damage object to a separate function, and
call it from clutter_x11_texture_set_window() and clutter_x11_texture_set_pixmap()
as appropriate. Addition and removal of the filter function is made
conditional on priv->damage to make free_damage_resources() cleanly
idempotent.
See: http://bugzilla.gnome.org/show_bug.cgi?id=587189 for the original
bug report.
http://bugzilla.openedhand.com/show_bug.cgi?id=1710
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If you select all the text in a ClutterText, there is an invisible
cursor position either at the beginning or end. If it's at the beginning,
the bug is that left arrow won't clear the selection. If it's at the end,
the bug is that the right arrow won't.
Here are the ways to reproduce it:
a. Ctrl-A selects all and moves the hidden cursor position to the left.
b. For single line: End, Shift-Home does the same.
c. Or manually moving to the end and doing Shift-Left Arrow to the
beginning.
These all put it in the state where right arrow will properly clear
selection and move to cursor position 1, but left arrow fails to clear
the selection.
For b and c above, the opposite will give you the end case where right
arrow doesn't work.
Anyway, it turns out clear_selection is getting called, it just doesn't
show up because it's not doing a queue_redraw. So the attached patch
seems to fix things.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
It might be desirable for some applications and/or platforms to get
every motion event that was delivered to Clutter from the windowing
backend. By adding a per-stage flag we can bypass the throttling
done when processing the events.
http://bugzilla.openedhand.com/show_bug.cgi?id=1665
Keep the CoglContext in sync between GL and GLES backends. We ought
to find a way to have a generic context, though, and have backend
specific sections.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1698
We need to explicitly force order so that ClutterJson.gir and Cogl.gir
are present in the parent directory before we try to build Clutter.typelib.
http://bugzilla.openedhand.com/show_bug.cgi?id=1700
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
On some platforms (anything but Linux, and on obscure Linux
architectures) dolt isn't used, so $(top_builddir)/doltlibtool
won't exist. $(top_builddir)/libtool will always be generated
even if dolt is used, so just use that unconditionally. We don't
need the extra speed when linking the single program for
introspection.
http://bugzilla.openedhand.com/show_bug.cgi?id=1699
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
A lot of applications change the size of the stage from the default
before the stage is initially shown. The size change won't take affect
until the first allocation run. However we want the window to be at
the correct size when we first map it so we should force an allocation
run before showing the stage.
There was an explicit call to XResizeWindow in
clutter_stage_x11_show. This is not needed anymore because
XResizeWindow will already have been called by the allocate method.
By default NSWindow does not listen to mousemoved events and hence the
default behaviour for Actors using the "motion-event" signal differs
from backend to backend.
Using setAcceptsMouseMovedEvents seems to fix it; unfortunately, I
cannot verify it, but since nobody is currently working on the Quartz
backend I guess it cannot get more broken than how currently is.
Thanks to: Michael <michael@f3k.org>
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1687
It would be useful inside a custom actor's paint function to be able to
tell if this is a primary paint call, or if we are in fact painting on
behalf of a clone.
In Mutter we have an optimization not to paint occluded windows; this is
desirable for the windows per se, to conserve bandwith to the card, but
if something like an application switcher is using clones of these windows,
they will not get painted either; currently we have no way of
differentiating between the two.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1685
The CLUTTER_TEXTURE_IN_CLONE_PAINT was used with the old CloneTexture
actor; now that we have ClutterClone nothing sets the private flag
anymore, and the flag itself is not needed.
Updating the WM hints on the stage window shortcircuits if the stage
is in WITHDRAWN state, so we need to move the update_wm_hints() call
after the flag has been unset.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If we manually wait for the VBLANK with:
- SGI_video_sync
- Direct usage of the DRM ioctl
Then we should call glFinish() first, or otherwise the swap-buffers
may be delayed by pending drawing and cause a tear.
http://bugzilla.openedhand.com/show_bug.cgi?id=1636
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
commit e2c4a2a9f8 fixed one thing but broke many others things :-/
hopfully this fixes that.
It turned out that the journal was mistakenly setting the OVERRIDE_LAYER0
flush option for all entries, but some other logic errors were also
uncovered in _cogl_material_equal.
