Otherwise, if we try egl-wayland first, we get the environment
variable from that, which crashes mesa trying to open the gbm device
as a wayland display.
https://bugzilla.gnome.org/show_bug.cgi?id=705836
In preparation for removing the automagic cogl-auto-texture apis this
adds a more minimal version of the cogl_texture_new_with_size code to
cogl-atlas.c for creating textures used to migrate images out of an
atlas and to cogl-texture-pixmap-x11.c.
Note: It turned out that both of these minimal versions were the same so
I did consider keeping a shared utility, but since the implementations
are very small and potentially due to the differing requirements for
atlas and pixmap-x11 textures we might even want them to differ later I
chose to keep them separate.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6d64307483713e7a5a7ef554275619def51b840f)
Conflicts:
cogl/cogl-atlas.c
cogl/winsys/cogl-texture-pixmap-x11.c
Instead of queuing the frame sync event immediately after a swap, the
Wayland winsys now installs a frame callback and queues the event when
Wayland reports that the frame is complete. It also reports the
COGL_FRAME_EVENT_COMPLETE event at the same time because there is no
more information we can give.
This patch is a bit of a divergence from how the events are handled in
the GLX winsys. Instead of installing its own idle function, the
_cogl_onscreen_queue_event() function has now been made non-static so
that it can be used by the Wayland winsys. The frame callback now just
queues an event using that. The pending_frame_infos queue on the
CoglOnscreen isn't used and instead the CoglFrameInfo is immediately
popped off the queue so that it can be stored as part of the closure
data when the frame callback is set up. That way it would use the
right frame info even if somehow the Wayland callbacks were invoked in
the wrong order and the code is a bit simpler.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit f7ea370a0d5013c9f0263f37c7f892adc8a2f087)
Previously if the Wayland socket gets closed then Cogl would ignore
the error when dispatching events which meant the socket would be
constantly ready for reading, the main loop would never go idle and it
would sit at 100% CPU. When Wayland encounters an error it will
actually close the socket which means if something else opened another
file then we might even end up polling on a completely unrelated FD.
This patch makes it remove the FD from the main loop as soon as it
hits an error so that it will at least avoid breaking the main loop.
However I think most applications would probably want to abort in this
case so we might also want to add a way to inform the application of
this or even just abort directly.
The cogl_poll_* functions have been changed so that they can cope if
the pending and dispatch callbacks remove their own FD while they are
invoked.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 85857b10687a5a246a0a4ef42711e560c7a6f45d)
This adds cogl_wayland_renderer_set_event_dispatch_enabled() which can
be used to prevent Cogl from adding the socket for the Wayland display
to its list of file descriptors to poll. This can be used in
applications that want to integrate Cogl with existing code that is
reading from the Wayland socket itself.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit f5b8d98676ab3e90ad80459019c737ec2ff90aa4)
The Wayland 1.0 protocol supports multiple independent components querying the
available interfaces by retreiving their own wl_registry object so the
application doesn't need to pass them down anymore.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 8ca36a1d1ab7236fec0f4d7b7361ca96e14c32be)
The idea with the framebuffer allocation is that it will lazily
allocate so that if you don't want to handle errors then you don't
have to be aware that there is an allocation step. In order for this
to work any accessors that get data that is only available after
allocation should implicitly allocate the framebuffer. This patch
makes that change for cogl_wayland_onscreen_get_surface and
cogl_wayland_onscreen_get_shell_surface.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 0c4ba78787323fedd162d7b71b86b460908b9b98)
cogl_wayland_onscreen_get_surface previously only worked if the
onscreen had a foreign surface on it. However there is no reason why
this shouldn't also work fine for manipulating the surface that Cogl
created as well. We may want to consider adding a separate getter for
the foreign surface that can be used before the framebuffer is
allocated.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 6bc12947a51224b70525893143bfe421723ce255)
Previously Cogl would only call wl_display_flush after doing a swap
buffers on the onscreen because that is the only place where Cogl
itself would end up queueing requests. However since commit
323fe188748 Cogl takes control of calling wl_display_dispatch as well
which effectively makes it very difficult for the application to
handle the Wayland event queue itself. Therefore it needs to rely on
Cogl to do it which means that other parts of the application may also
queue requests that need to be flushed.
This patch tries to copy the display fd handling of window.c in the
Weston example clients. wl_display_flush will always be called in
prepare function for the fd which means it will always be called
before going idle. If flushing the display causes the socket buffer to
become full, it will additionally poll for write on the FD to try
flushing again when it becomes empty.
We also need to call wl_display_dispatch_pending in the prepare
because apparently calling eglSwapBuffers can cause it to read data
from the FD to receive events for a different queue. In that case
there will be events that need to be handled but the FD will no longer
be ready for reading so we won't wake up the main loop any other way.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 962d1825105a87dd8358a765353b77f6af8fe760)
If we don't do this then it might leak connections to the display if
multiple different renderers are tried.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 8e5b4d40a4d960d0d20927d30ee68a37387fe776)
The handler for ConfigureNotify events in the EGL X11 winsys was
incorrectly trying dereference the onscreen pointer even if it didn't
find an onscreen for the X window that has resized. This meant that if
the application has other windows that weren't created by Cogl then it
would crash when handling events for them.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit a0056df61903d74180d4e4caa1046e68396d1be0)
_cogl_egl_query_wayland_buffer was using _COGL_RETURN_IF_FAIL but the
function needs to return a CoglBool so it was giving a warning.
(cherry picked from commit d0290eb19fc9bf56fb24f8eab573e19966ea7e1a)
This adds a callback that can be registered with
cogl_onscreen_add_dirty_callback which will get called whenever the
window system determines that the contents of the window is dirty and
needs to be redrawn. Under the two X-based winsys's, this is reported
off the back of the Expose events, under SDL it is reported from
SDL_VIDEOEXPOSE or SDL_WINDOWEVENT_EXPOSED and under Windows from the
WM_PAINT messages. The Wayland winsys doesn't really have the concept
of dirtying the buffer but in order to allow applications to work the
same way on all platforms it will emit the event when the surface is
first shown and whenever it is resized.
There is a private feature flag to specify whether dirty events are
supported. If the winsys does not set this then Cogl will simulate
dirty events by emitting one when the window is first allocated and
when it is resized. The only winsys's that don't set this flag are
things like KMS or the EGL null winsys where there is no windowing
system and showing and hiding the onscreen doesn't really make any
sense. In that case Cogl can assume the buffer will only become dirty
once when it is first allocated.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 85c5a9ba419b2247bd768284c79ee69164a0c098)
Conflicts:
cogl/cogl-private.h
After discussing with Kristian Høgsberg it seems that the semantics of
wl_egl_window_resize is meant to be that if nothing has been drawn to
the framebuffer since the last swap then the resize will take effect
immediately. Cogl was previously always delaying the call to
wl_egl_window_resize until the next swap. That meant that if you
wanted to resize the surface you would have to call
cogl_wayland_onscreen_resize and then redundantly draw a frame at the
old size so that you can swap to get the resize to occur before
drawing again at the right size. Typically an application would decide
to resize at the start of its paint sequence so it should be able to
just resize immediately.
In current Mesa master it seems that there is a bug which means that
it won't actually delay a resize that is done mid-scene and instead it
will just discard what came before. To get consistent behaviour in
Cogl, the code to delay the call to wl_egl_window_resize is still used
if it determines that the buffer is dirty. There is an existing
_cogl_framebuffer_mark_mid_scene call which was being used to track
when the framebuffer becomes dirty since the last clear. This function
is now also used to track a new flag to track whether something has
been drawn since the last swap. It is called ‘mid_scene’ under the
assumption that this may also be useful for other things later.
cogl_framebuffer_clear has been slightly altered to always call
_cogl_framebuffer_mark_mid_scene even if it determines that it doesn't
need to clear because the framebuffer should still be considered to be
in the middle of a scene. Adding a quad to the journal now also begins
the scene.
This also fixes a potential bug where it looks like pending_dx/dy were
never cleared so they would always be accumulated even after the
resize is flushed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 945689a62903990a20abb87a85d2c96eb3985fe7)
If we delay setting the surface to toplevel until it is shown then
that gives the application an opportunity to avoid calling show so
that it can set its own surface type.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ab59c3a421968d7f159d89ca2f0ba8a9f098cbf6)
Previously the WGL winsys was expecting the application to send all
windows messages to Cogl via the cogl_win32_renderer_handle_event
function. When using a GLib main loop we can make this work
transparently to the application with a GSource for the magic
G_WIN32_MSG_HANDLE file descriptor. That causes the GMainLoop to wake
up whenever a message is available.
This patch makes the WGL winsys add that magic value as a source fd.
This will only have any meaning if the application is using glib, but
it shouldn't matter because the cogl_poll_renderer_get_info function
is documented to only work on Unix-based winsys's anyway.
This patch is an API break because by default Cogl will now start
stealing all of the Windows messages. Something like Clutter that wants to handle
its own event retrieval would now need to call
cogl_win32_renderer_set_event_retrieval_enabled to stop Cogl from
stealing the events.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 99a7f84d7149f24f3e86c5d3562f9f2632ff6df8)
The implementation of cogl_wayland_texture_2d_new_from_buffer now uses
eglQueryWaylandBuffer to query the format of the buffer before trying to
create a texture from the buffer. This makes sure we don't try and
create a texture from YUV buffers for instance that may actually require
multiple textures. We now also report an error when we don't understand
the buffer type or format.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 79252d4e419e2462c5bc89ea4614b40bddc932c5)
This enables basic Emscripten support in Cogl via the SDL winsys.
Assuming you have setup an emscripten toolchain you can configure Cogl
like this:
emconfigure ./configure --enable-debug --enable-emscripten
Building the examples will build .html files that can be loaded directly
by a WebGL enabled browser.
Note: at this point the emscripten support has just barely been smoke
tested so it's expected that as we continue to build on this we will
learn about more things we need to change in Cogl to full support this
environment.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit a3bc2e7539391b074e697839dfae60b69c37cf10)
cogl_framebuffer_add_fence creates a synchronisation fence, which will
invoke a user-specified callback when the GPU has finished executing all
commands provided to it up to that point in time.
Support is currently provided for GL 3.x's GL_ARB_sync extension, and
EGL's EGL_KHR_fence_sync (when used with OpenGL ES).
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=691752
(cherry picked from commit e6d37470da9294adc1554c0a8c91aa2af560ed9f)
This adds a _cogl_poll_renderer_add_source() function that we can use
within cogl to hook into the mainloop without necessarily having a file
descriptor to poll. Since the intention is to use this to support
polling for fence completions this also updates the
CoglPollCheckCallback type to take a timeout pointer so sources can
optionally update the timeout that will be passed to poll.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 81c1ce0ffce4e75e08622e20848405987e00b3cc)
This adds api to be able requests a swap_buffers and also pass a list of
damage rectangles that can be passed on to a compositor to enable it to
minimize how much of the screen it needs to recompose.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 0d9684c7b7c2018bb42715c369555330d38514a2)
Instead of driving event dispatching through a per winsys poll_dispatch
vfunc its now possible to associate a check and dispatch function with
each file descriptor that is registered for polling. This means we can
remove the winsys get_dispatch_timeout and poll_dispatch vfuncs and it
also makes it easier for more orthogonal internal components to add file
descriptors for polling to the mainloop.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 627947622df36dd529b9dc60a3ae9e6083532b19)
This adds a _cogl_poll_renderer_add_idle api that can be used internally
for queuing an idle callback without needing to make any assumption
about the system mainloop that is being used. This is now used to avoid
having the _cogl_poll_renderer_dispatch() directly check for all kinds of
events to dispatch, and to avoid having the winsys dispatch vfuncs need
to directly know about CoglContext. This means we can now avoid having a
back reference from CoglRenderer to the CoglContext.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit a1e169f18f4257caec58760adccfe4ec09b9805d)
This updates the cogl_poll_ apis to allow dispatching events before we
have a CoglContext and to also enables pollfd state to be changed in a
more add-hoc way by different Cogl components by replacing the
winsys->get_poll_info with _cogl_poll_renderer_add/remove_fd functions
and a winsys->get_dispatch_timeout vfunc.
One of the intentions here is that applications should be able to run
their mainloop before creating a CoglContext to potentially get events
relating to CoglOutputs.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 667e58c9cb2662aef5f44e580a9eda42dc8d0176)
This adds support for optionally providing a foreign Wayland surface to
a CoglOnscreen before allocation. Setting a foreign surface prevents
Cogl from creating a toplevel Wayland shell surface for the OnScreen.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit e447d9878f3bcfe5fe336d367238383b02879223)
This prevents leaking the Wayland shell surface associated with a Cogl
OnScreen when it is finalised.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 760fc9f3af5475530262b82a55df311fceca358a)
Call wl_display_dispatch on POLLIN. This follows the implementation
in weston/clients/window.c and improves integration of input events,
at least.
Signed-off-by: Andreas Oberritter <obi@saftware.de>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 323fe1887487f19c3e26aa6b7644de31d8d0a532)
This makes sure the EGL_KHR_create_context enums are always defined in
cogl-winsys-egl.c so we will build with drivers that don't support this
extension. Cogl will do runtime checks to explicitly check that the
extension is available before ever referencing these enums so this is
safe to do.
https://bugzilla.gnome.org/show_bug.cgi?id=694537
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit bd034b7451e7d9c602bcc91f1a00f6aaa7b05ec0)
This fixes some minor errors and warnings that were preventing Cogl
building with mingw32:
• cogl-framebuffer-gl.c was not including cogl-texture-private.h.
Presumably something else ends up including that when building for
GLX.
• The WGL winsys was not including cogl-error-private.h
• A call to strsplit in the WGL winsys was wrong.
• For some reason the test-wrap-rectangle-textures test was trying to
include the GDKPixbuf header.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 5380343399f834d9f96ca3b137d49c9c2193900a)
It seems like it would be quite a reasonable design for an application
to immediately paint the buffer and call swap_buffers within the
handler for the sync event. This previously wouldn't work.
When using the GLX winsys if swap_region is called then it immediately
tries to set the pending notification flag. However if this is called
from the event callback then when the callback is complete it will
clear the flag again and the pending notification will be lost. This
patch just makes it clear the pending flag before invoking the
callback so that it can be safely queued again.
With any winsys that doesn't directly handle the sync event
notification it would almost work except that it was iterating the
live list of pending events. If the callback causes another event to
be added to this list by issuing a buffer swap then the iteration
would never complete and cogl_poll_dispatch would never return. This
patch just makes it steal the list before iterating so that any
additions will be dispatched by a later call to cogl_poll_dispatch
instead.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 2263b31594900b73900d2ce22cf70c68e7e793c6)
The first hunk from commit 93b7b4c850dd928bf21ee168a95641a8d631f713
turned out to be redundant because GLX guarantees that configs returned
by glXChooseFBConfig should be sorted with non msaa configs coming
first. The second hunk is required since we use glXGetFBConfigs in that
case which doesn't sort the configs.
I had meant to drop this part of the patch before landing it but forgot.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit b19fcc1869275826e952925af922125daf8a48de)
There is no guaranty that glXGetFBConfigs will return fbconfig ordered
with non msaa config first. This patch make sure that non msaa config
get choose.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 93b7b4c850dd928bf21ee168a95641a8d631f713)
Add an API to get the current time in the time system that Cogl
is reporting timestamps. This is to be used to convert timestamps
into a different time system.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 9f3735a0c37adcfcffa485f81699b53a4cc0caf8)
Add a CoglFrameInfo object that tracks timing information for frames
that are drawn. We track a frame counter and frame timing information
for each CoglOnscreen. Internally a CoglFrameInfo is automatically
created for each frame, delimited by cogl_onscreen_swap_buffers() or
cogl_onscreen_swap_region() calls.
CoglFrameInfos are delivered to applications via frame event callbacks
that can be registered with a new cogl_onscreen_add_frame_callback()
api. Two initial event types (dispatched on all platforms) have been
defined; a _SYNC event used for throttling the frame rate of
applications and a _COMPLETE event used so signify the end of a frame.
Note: This new _add_frame_callback() api makes the
cogl_onscreen_add_swap_complete_callback() api redundant and so it
should be considered deprecated. Since the _add_swap_complete_callback()
api is still experimental api, we will be looking to quickly migrate
users to the new api so we can remove the old api.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 700401667db2522045e4623d78797b17f9184501)
When we block waiting for the swap, prefer doing that using
glXWaitForMsc() from OML_sync_control because that returns a system
time value for the precise time of the swap.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 1e8114aabc78b90373d3d5f3f7c0224f8786e399)
The CoglOutput object represents one output such as a monitor or
laptop panel, with information about attributes of the output such as
the position of the output within the global coordinate space, and
the refresh rate.
We don't yet publically export the ability to get output information but
we track it for the GLX backend, where we'll use it to track the refresh
rate.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d7ef9d8d71488d0e6874f1ffc6e48700d5c82a31)
Similar to commit 2c0cfdefbb9d1 for the SDL2 winsys, the GLX and EGL
window systems need to bind the dummy surface or drawable when the
currently bound onscreen is destroyed so that there will always be a
valid context bound.
Previously I got the idea that this would not be necessary on GLX
because the documentation for glXDestroyDrawable states that the
drawable won't actually be destroyed if it is currently bound until it
becomes unbound. However it doesn't say what happens if the underlying
X window is also destroyed and after testing it seems this causes a
segfault in Mesa in GLX and an XError for EGLX.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 4a464eec8c5b5832b9fd6b69746ab4ab36229182)
This adds support for the EGL_EXT_buffer_age extension which is a
counterpart to the GLX_EXT_buffer_age extension.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 92d869764c03d0bac6b51dac833510c22669ac4a)
Add a new BUFFER_AGE winsys feature and a get_buffer_age method to
cogl-onscreen that allows to query the value.
https://bugzilla.gnome.org/show_bug.cgi?id=669122
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Note: When landing the patch I made some gtk-doc updates and changed
_get_buffer_age to return an age of 0 always if the age feature isn't
support instead of using _COGL_RETURN_VAL_IF_FAIL. -- Robert Bragg
(cherry picked from commit 427b1038051e9b53a071d8c229b363b075bb1dc0)
The GL3 context is created using the glXCreateContextAttribs function
which is part of the GLX_ARB_create_context extension. However
previously the function pointers from GLX extensions were only
retrieved once the GL context is created. That meant that the GL3
context creation function would always assume that the extension is
not supported so it would always fail.
This patch changes it to query the functions when the renderer is set
up instead. The base winsys feature flags that are determined while
querying the functions are stored in a member of CoglGLXRenderer.
These are then copied to the CoglContext when it is initialised.
The spec for glXGetProcAddress says that the functions returned are
context-independent. That implies that it is safe to call it without
binding a context although that is not explicitly stated as far as I
can tell. A big of googling finds this DRI documentation which says it
can be used without a context:
http://dri.freedesktop.org/wiki/glXGetProcAddressNeverReturnsNULL
And also this code sample:
http://www.opengl.org/wiki/Tutorial:_OpenGL_3.0_Context_Creation_%28GLX%29
One point that makes me concerned that this might not always work in
practice is that the code in SDL2 to create a GL3 context first
creates a dummy GL2 context in order to have something bound before it
calls glXGetProcAddress. I think this may just be a misunderstanding
based on how wglGetProcAddress works however.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 04a7aca9a98e84e43ac5559305a1358112902e30)
Consistent with how we lazily allocate framebuffers this patch allows us
to instantiate textures but still specify constraints and requirements
before allocating storage so that we can be sure to allocate the most
appropriate/efficient storage.
This adds a cogl_texture_allocate() function that is analogous to
cogl_framebuffer_allocate() which can optionally be called to explicitly
allocate storage and catch any errors. If this function isn't used
explicitly then Cogl will implicitly ensure textures are allocated
before the storage is needed.
It is generally recommended to rely on lazy storage allocation or at
least perform explicit allocation as late as possible so Cogl can be
fully informed about the best way to allocate storage.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7)
Note: This reverts the cogl_texture_rectangle_new_with_size API change
that dropped the CoglError argument and keeps the semantics of
allocating the texture immediately. This is because Mutter currently
uses this API so we will probably look at updating this later once
we have a corresponding Mutter patch prepared. The other API changes
were kept since they only affected experimental api.
There was a lot of redundancy in how we tracked the width and height of
different texture types which is greatly simplified by adding width and
height members to CoglTexture directly and removing the get_width and
get_height vfuncs from CoglTextureVtable
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 3236e47723e4287d5e0023f29083521aeffc75dd)
This moves the _cogl_texture_get_gl_format function from cogl-texture.c
to cogl-texture-gl.c and renames it _cogl_texture_gl_get_format.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit f8deec01eff7d8d9900b509048cf1ff1c86ca879)
This remove cogl-internal.h in favour of using cogl-private.h. Some
things in cogl-internal.h were moved to driver/gl/cogl-util-gl-private.h
and the _cogl_gl_error_to_string function whose prototype was moved from
cogl-internal.h to cogl-util-gl-private.h has had its implementation
moved from cogl.c to cogl-util-gl.c
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 01cc82ece091aa3bec4c07fdd6bc9e5135fca573)
Cogl always needs to have the context bound to something so that it
can freely create resources such as textures even if there is no
current window. When the currently bound SDLWindow is destroyed, SDL
apparently explicitly unbinds the GL context. If something then later
for example tries to create a texture Cogl would start getting GL
errors and fail. To fix this the SDL winsys now just binds the dummy
window before deiniting the currently bound onscreen.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 2c0cfdefbb9d1ac5097d98887d3581b67a324fae)
cogl_texture_set_region() and cogl_texture_set_region_from_bitmap() now
have a level argument so image data can be uploaded to a specific mipmap
level.
The prototype for cogl_texture_set_region was also updated to simplify
the arguments.
The arguments for cogl_texture_set_region_from_bitmap were reordered to
be consistent with cogl_texture_set_region with the source related
arguments listed first followed by the destination arguments.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 3a336a8adcd406b53731a6de0e7d97ba7932c1a8)
Note: Public API changes were reverted in cherry-picking this patch
Removes some (not all) use of _COGL_GET_CONTEXT() from cogl-winsys-glx.c
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 698a131c4991e4393ce966b968637fba194f252c)
This adds a driver/gl/cogl-texture-gl.c file and moves some gl specific
bits from cogl-texture.c into it. The moved symbols were also given a
_gl_ infix and the calling code was updated accordingly.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 2c9e81de70cc02d72b1ce9013c49e39300a05b6a)
This allows apps to catch out-of-memory errors when allocating textures.
Textures can be pretty huge at times and so it's quite possible for an
application to try and allocate more memory than is available. It's also
very possible that the application can take some action in response to
reduce memory pressure (such as freeing up texture caches perhaps) so
we shouldn't just automatically abort like we do for trivial heap
allocations.
These public functions now take a CoglError argument so applications can
catch out of memory errors:
cogl_buffer_map
cogl_buffer_map_range
cogl_buffer_set_data
cogl_framebuffer_read_pixels_into_bitmap
cogl_pixel_buffer_new
cogl_texture_new_from_data
cogl_texture_new_from_bitmap
Note: we've been quite conservative with how many apis we let throw OOM
CoglErrors since we don't really want to put a burdon on developers to
be checking for errors with every cogl api call. So long as there is
some lower level api for apps to use that let them catch OOM errors
for everything necessary that's enough and we don't have to make more
convenient apis more awkward to use.
The main focus is on bitmaps and texture allocations since they
can be particularly large and prone to failing.
A new cogl_attribute_buffer_new_with_size() function has been added in
case developers need to catch OOM errors when allocating attribute buffers
whereby they can first use _buffer_new_with_size() (which doesn't take a
CoglError) followed by cogl_buffer_set_data() which will lazily allocate
the buffer storage and report OOM errors.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit f7735e141ad537a253b02afa2a8238f96340b978)
Note: since we can't break the API for Cogl 1.x then actually the main
purpose of cherry picking this patch is to keep in-line with changes
on the master branch so that we can easily cherry-pick patches.
All the api changes relating stable apis released on the 1.12 branch
have been reverted as part of cherry-picking this patch so this most
just applies all the internal plumbing changes that enable us to
correctly propagate OOM errors.
This fixes some problems which were stopping --disable-glib from
working properly:
• A lot of the public headers were including glib.h. This shouldn't be
necessary because the API doesn't expose any glib types. Otherwise
any apps would require glib in order to get the header.
• The public headers were using G_BEGIN_DECLS. There is now a
replacement macro called COGL_BEGIN_DECLS which is defined in
cogl-types.h.
• A similar fix has been done for G_GNUC_NULL_TERMINATED and
G_GNUC_DEPRECATED.
• The CFLAGS were not including $(builddir)/deps/glib which was
preventing it finding the generated glibconfig.h when building out
of tree.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 4138b3141c2f39cddaea3d72bfc04342ed5092d0)
This adds a function to get a pointer to the SDL_Window associated
with a CoglOnscreen when using the SDL2 winsys.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 071f4b80daa8a2f967746a30b3acf014d74f781a)
The SDL 1 winsys now checks for the initial resizable state of the
onscreen framebuffer when it is allocated and updates the video flags
accordingly.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit f5fb9be70a92f751886a94da0b34e14252ed197e)
The SDL2 winsys will now set the SDL_WINDOW_RESIZABLE flag on the
window before creating it if the resizable property is set on the
onscreen. Note that there doesn't appear to be a way in SDL to change
the flag later so unlike the other winsyses it will only take affect
if it is set before allocating the framebuffer.
The winsys now registers a callback for SDL events so that it can
report window size changes back to the application.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 0dea9aeb897faf029828379b120970477df3c7d5)
The check to verify whether we've got the right GL context was
checking that the GL version was less than 3 whenever the non-GL3
driver is used. However it looks like the driver is free to return a
GL3 context that is compatible with GL2 if GL2 is requested so this
was breaking the GL2 driver.
This also adds the necessary SDL attributes to request a forward
compatible core context like the GLX and EGL winsys's do. I haven't
actually tested this because it looks like SDL will only create a GL
context with GLX and I haven't got a recent enough X server to handle
the glXCreateContextAttribs request.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d46acafa3ea7ba2e6c4ac7a45f00a132df1b2872)
The SDL2 winsys was using _cogl_set_error without including its header
so it was giving an annoying warning. This patch also fixes some
indentation issues.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 9c8433087b7573f7606dfae2bae3045803ead115)
This adds a new CoglDriver for GL 3 called COGL_DRIVER_GL3. When
requested, the GLX, EGL and SDL2 winsyss will set the necessary
attributes to request a forward-compatible core profile 3.1 context.
That means it will have no deprecated features.
To simplify the explosion of checks for specific combinations of
context->driver, many of these conditionals have now been replaced
with private feature flags that are checked instead. The GL and GLES
drivers now initialise these private feature flags depending on which
driver is used.
The fixed function backends now explicitly check whether the fixed
function private feature is available which means the GL3 driver will
fall back to always using the GLSL progend. Since Rob's latest patches
the GLSL progend no longer uses any fixed function API anyway so it
should just work.
The driver is currently lower priority than COGL_DRIVER_GL so it will
not be used unless it is specificly requested. We may want to change
this priority at some point because apparently Mesa can make some
memory savings if a core profile context is used.
In GL 3, getting the combined extensions string with glGetString is
deprecated so this patch changes it to use glGetStringi to build up an
array of extensions instead. _cogl_context_get_gl_extensions now
returns this array instead of trying to return a const string. The
caller is expected to free the array.
Some issues with this patch:
• GL 3 does not support GL_ALPHA format textures. We should probably
make this a feature flag or something. Cogl uses this to render text
which currently just throws a GL error and breaks so it's pretty
important to do something about this before considering the GL3
driver to be stable.
• GL 3 doesn't support client side vertex buffers. This probably
doesn't matter because CoglBuffer won't normally use malloc'd
buffers if VBOs are available, but it might but worth making
malloc'd buffers a private feature and forcing it not to use them.
• GL 3 doesn't support the default vertex array object. This patch
just makes it create and bind a single non-default vertex array
object which gets used just like the normal default object. Ideally
it would be good to use vertex array objects properly and attach
them to a CoglPrimitive to cache the state.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 66c9db993595b3a22e63f4c201ea468bc9b88cb6)
The EGL winsys had a special case code path when trying to create a
context where if it failed it would try again except without requesting
a stencil buffer. Historically this code path was to allow Clutter to
run on PowerVR MBX hardware which doesn't support a stencil buffer. It
doesn't really make sense to keep this workaround in Cogl as it would
leave Cogl in a state where the clip stack doesn't work without
providing any feedback to the developer. If we need to support running
on MBX like hardware - probably not very likely these days - then we
should provide developer control over the stencil buffer so the
equivalent workaround could be implemented on top of Cogl.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit a7c391a985e82707b17f2fb1105de5d37822a390)
The function pointer for texture_2d_get_data in the driver vtable was
expecting an unsigned int for the rowstride but the definition in
cogl-texture-2d-gl.c took a size_t so it was giving an annoying
warning. This normalizes them both to just take an int. This seems to
better match the pattern used for cogl_bitmap_new_from_data and
cogl_texture_2d_new_from_data.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 003f080531d5368835081568779b031ef4f09a77)
This renames the set_filters and set_wrap_mode_parameters texture
virtual functions to gl_flush_legacy_texobj_filters and
gl_flush_legacy_texobj_wrap_modes respectively to clarify that they are
opengl driver specific and that they are only used to support the legacy
opengl apis for setting filters and wrap modes where the state is
associated with texture objects instead of being associated with sampler
objects.
This part of an effort to clearly delimit our abstraction over opengl so
that we can start to consider non-opengl backends for Cogl.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6f78b8a613340d7c6b736e51a16c625f52154430)
Although we use GLib internally in Cogl we would rather not leak GLib
api through Cogl's own api, except through explicitly namespaced
cogl_glib_ / cogl_gtype_ feature apis.
One of the benefits we see to not leaking GLib through Cogl's public API
is that documentation for Cogl won't need to first introduce the Glib
API to newcomers, thus hopefully lowering the barrier to learning Cogl.
This patch provides a Cogl specific typedef for reporting runtime errors
which by no coincidence matches the typedef for GError exactly. If Cogl
is built with --enable-glib (default) then developers can even safely
assume that a CoglError is a GError under the hood.
This patch also enforces a consistent policy for when NULL is passed as
an error argument and an error is thrown. In this case we log the error
and abort the application, instead of silently ignoring it. In common
cases where nothing has been implemented to handle a particular error
and/or where applications are just printing the error and aborting
themselves then this saves some typing. This also seems more consistent
with language based exceptions which usually cause a program to abort if
they are not explicitly caught (which passing a non-NULL error signifies
in this case)
Since this policy for NULL error pointers is stricter than the standard
GError convention, there is a clear note in the documentation to warn
developers that are used to using the GError api.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46)
Note: Since we can't change the Cogl 1.x api the patch was changed to
not rename _error_quark() functions to be _error_domain() functions and
although it's a bit ugly, instead of providing our own CoglError type
that's compatible with GError we simply #define CoglError to GError
unless Cogl is built with glib disabled.
Note: this patch does technically introduce an API break since it drops
the cogl_error_get_type() symbol generated by glib-mkenum (Since the
CoglError enum was replaced by a CoglSystemError enum) but for now we
are assuming that this will not affect anyone currently using the Cogl
API. If this does turn out to be a problem in practice then we would be
able to fix this my manually copying an implementation of
cogl_error_get_type() generated by glib-mkenum into a compatibility
source file and we could also define the original COGL_ERROR_ enums for
compatibility too.
Note: another minor concern with cherry-picking this patch to the 1.14
branch is that an api scanner would be lead to believe that some APIs
have changed, and for example the gobject-introspection parser which
understands the semantics of GError will not understand the semantics of
CoglError. We expect most people that have tried to use
gobject-introspection with Cogl already understand though that it is not
well suited to generating bindings of the Cogl api anyway and we aren't
aware or anyone depending on such bindings for apis involving GErrors.
(GnomeShell only makes very-very minimal use of Cogl via the gjs
bindings for the cogl_rectangle and cogl_color apis.)
The main reason we have cherry-picked this patch to the 1.14 branch
even given the above concerns is that without it it would become very
awkward for us to cherry-pick other beneficial patches from master.
glBlitFramebuffer is affected by the scissor so we need to ensure
there is an empty clip flushed before using it. This is similar to
what is done in _cogl_blit_framebuffer().
https://bugzilla.gnome.org/show_bug.cgi?id=690451
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Tested-by: Aaron Plattner <aplattner@nvidia.com>
(cherry picked from commit 65da3f88af9c7b8d72758d116c2652aff68195c1)
The ‘length’ for the swap chain is initially -1 which is supposed to
mean ‘no preference’. However, both of the SDL winsys's were
explicitly setting the SDL_GL_DOUBLEBUFFER attribute to zero in that
case which would try to disable double buffering.
On OS X, the equivalent to eglSwapBuffers (ie, [NSOpenGLContext
flushBuffer]) does nothing for a single buffer context. The
cogl-sdl-hello example does not specify the swap chain length so
presumably it would end up with a single buffer config. When
cogl_onscreen_swap_buffers is called it therefore does nothing and
nothing is painted.
I guess to make single-buffered contexts actually useful we should
expose some public equivalent to glFlush so that you can ensure the
rendering commands will actually hit the buffer. Alternatively we
could document that cogl_onscreen_swap_buffers performs this task on
single-buffered configs and then we could make the SDL winsys
explicitly call glFlush in that case.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 71e57f99002d5dee79bbd44b3bc57712b99acb55)
Previously when pushing the GLES2 context with an onscreen framebuffer
it would just call bind_onscreen. This actually binds it with Cogl's
context so presumably the context isolation wasn't working properly.
This patch splits out bind_onscreen to have a second function called
bind_onscreen_with_context that explicitly takes the EGL context to
use. Cogl now uses this when pushing the GLES2 context.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 3653c5b10058a3f79900eb2644cb30f4cf1ca47e)
Previously, Cogl was advertising the GLES2 context feature whenever
the EGL winsys was used, even if the winsys was used with the GL
driver. This wasn't working because when the GL context is created the
API is set to GL with eglBindAPI and it is never changed back to GLES
when the GLES2 context is created. That meant that the created context
is actually GL not GLES2. Any rendering would then fail because the GL
context does not understand the precision statement.
It could be possible to fix it so that it will set the API correctly
before creating the context. It would then also need to reset the API
and unbind the previous context whenever switching between GLES2 and
GL contexts. If the context isn't unbound first then eglMakeCurrent
will actually try to bind both contexts at the same time and at least
Mesa detects this situation and reports that the two contexts
conflict. Presumably we would also need to do something more clever
when we retrieve the function pointers for the GLES2 context.
Currently we just copy them from the CoglContext but if the context is
using the GL driver then this would mean the functions came from libGL
not libGLESv2.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 624dea207cf76ae9ccd7f57c4ebd15d3bd65bff0)
Previously when Cogl detects that the GLX context is indirect it
resets the function pointers for the VBLANK_COUNTER feature to NULL.
However it wasn't removing the VBLANK_COUNTER feature flag. Some other
parts of the winsys check for that feature flag rather than checking
whether the pointer is NULL so it would end up calling an invalid
function pointer and crashing. This just fixes it to also clear the
feature flag.
https://bugzilla.gnome.org/show_bug.cgi?id=684917
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit e947c713a541086f80a308d22774229f0720196a)
As part of our on-going goal to remove our dependence on a global Cogl
context this patch adds a pointer to the context to each CoglTexture
so that the various texture apis no longer need to use
_COGL_GET_CONTEXT.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 83131072eea395f18ab0525ea2446f443a6033b1)
The check for whether to use ‘stride’ instead of ‘pitch’ from the GBM
API tries to check whether the GBM version is >= 8.1.0. However it was
comparing the major and micro components independently so any version
with the minor part set to 0 would fail. The GBM version in Mesa
master is now 9.0.0 which breaks it. This patch changes it to check
the version using the COGL_VERSION_ENCODE macro instead.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 38f1dc58b35023f9e6bbc0db746b1554bd0377fc)
gbm_bo_get_pitch was renamed to gbm_bo_get_stride to be consistent with
how the terms pitch and stride are used throughout mesa. This updates
the Cogl backend to use the new gbm_bo_get_stride name.
For compatibility with previous version of libgbm we now explicitly
check the version of libgbm in configure.ac and expose
COGL_GBM_{MAJOR,MINOR,MICRO} defines to the code so we can conditionally
use the older gbm_bo_get_pitch() name with older versions.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 47c6247095e2f1f8725c4eb08d38c9de15e283cd)
The surfaceless extension that Mesa advertises has been renamed to
EGL_KHR_surfaceless_context instead of a separate extension for the
GLES, GLES2 and GL APIs and the new extension has been ratified by
Khronos. Therefore the KMS backend no longer runs against Mesa master.
We could just rename the extension we check for, however Weston (the
sample Wayland compositor) has switched to just creating a dummy GBM
surface and not using the surfaceless extension at all. We should
probably do the same thing.
Using the surfaceless extension could be a good idea but we don't
really need to rely on it for KMS and we would want to do it for all
EGL backends, not just the KMS backend.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d4f22f8cb013d417c99ba03924538924191c2fe6)
This function should take an extra third paramter to specify whether
the procedure is in core or not. The parameter is not used so this
patch just fixes an annoying warning.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit eed4ac80cd8c3fa1859493c9bb00547038be6095)
This just gets rid of some annoying warnings.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 3d0aea04d1f6a8094b749e20a59d8a9a95a6235e)
This adds two new configuration environment variables:
COGL_DISABLE_GL_EXTENSIONS and
COGL_OVERRIDE_GL_VERSION
The variables can also be set in the cogl.conf file using the same
names.
The first one is a list of GL extension names separated by commas.
When set Cogl will assume any extension listed here is not available
by removing it from the string returned from
glGetString(GL_EXTENSIONS). If the string is set in both the config
file and the environment variable then the union of the two lists will
be used.
The second overrides the value returned from glGetString(GL_VERSION).
If the string is set in both places the version from the environment
variable will take priority.
These are sometimes useful for debugging Cogl to test the various
combinations of extensions. It could also be useful to work around
driver bugs where an extension is badly supported and it would be
better not to use it.
The variables in cogl-config that just set a global char * variable
have been put together in an array instead of having a separate blob
of code for each one in order to make it simpler to add new variables.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ec69c2dc576c78664e0b73879365cb7414ecf441)
Someone trying to compile cogl (ThijsNL on irc0 for the Rasberry Pi
stumbled into that one. GLXDrawable may not be defined in a pure EGL/X
environment.
Change it to Window, the type used for XConfigureEvent.window.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit f05d6923fff28b1d167a391d486e319743c49215)
Otherwise, X11 identifiers may leak and cause havoc in big applications
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit ed0cdca0eca815543619fe72fbd42d662d53f92d)
This adds api to be able to request that the window system allows a
given onscreen framebuffer to be resizable, and api to add and remove
resize handlers to be called whenever the framebuffer does actually
change size.
The new functions are:
cogl_onscreen_{get,set}_resizable()
cogl_onscreen_{add,remove}_resize_handler()
The examples cogl-hello and cogl-x11-foreign have been updated to use
the new api. To smoke test how Cogl updates the viewport automatically
in response to window resizes the cogl-hello test doesn't explicitly
respond to resize events by setting the viewport and cogl-x11-foreign
responds by setting a viewport that is offset by a quarter of the
window's width/height and half the width and height of the window.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit a1a8cc00bfa2cecaf1007aec5f3dd95dc07b1786)
According to the EGL spec, eglGetProcAddress should only be used to
retrieve extension functions. It also says that returning non-NULL
does not mean the extension is available so you could interpret this
as saying that the function is allowed to return garbage for core
functions. This seems to happen at least for the Android
implementation of EGL.
To workaround this the winsys's are now passed down a flag to say
whether the function is from the core API. This information is already
in the gl-prototypes headers as the minimum core GL version and as a
pair of flags to specify whether it is available in core GLES1 and
GLES2. If the function is in core the EGL winsys will now avoid using
eglGetProcAddress and always fallback to querying the library directly
with the GModule API.
The GLX winsys is left alone because glXGetProcAddress apparently
supports querying core API and extension functions.
The WGL winsys could ideally be changed because wglGetProcAddress
should also only be used for extension functions but the situation is
slightly different because WGL considers anything from GL > 1.1 to be
an extension so it would need a bit more information to determine
whether to query the function directly from the library.
The SDL winsys is also left alone because it's not as easy to portably
determine which GL library SDL has chosen to load in order to resolve
the symbols directly.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 72089730ad06ccdd38a344279a893965ae68cec1)
Since we aren't able to break API on the 1.12 branch
cogl_get_proc_address is still supported but isn't easily able to
determine whether the given name corresponds to a core symbol or
not. For now we just assume the symbol being queried isn't part
of the core GL api and update the documentation accordingly.
This adds an alternate version of the SDL winsys using the SDL 2 API.
The two versions are mutually exclusive and share the same
CoglWinsysID. Version 2 of SDL fits a little bit better with Cogl
because it supports multiple windows and the video subsystem can be
initialised entirely independently of the rest of the subsystems.
The SDL2 winsys creates an invisible dummy window in order to bind the
GL context after creating the Cogl display. This is similar to how the
X11 winsys's work.
SDL2 seems to support compiling with support for both GL and GLES.
However there doesn't seem to be a way to select between the two
backends outside of SDL. In fact if you do compile them both in it
seems to break down because it will always try to use the window
system functions from the GLES backend because those are filled in
second in the vtable. However when creating the window it will always
prefer to use the GL function to choose a visual. This function gets
confused because the GL backend has not been initialised at that
point. The Cogl backend therefore just leaves it up to SDL to pick a
sensible backend. It will then verify that it picked a GL library
which matches the Cogl driver by checking the string from
glGetString(GL_VERSION).
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 6cb5ab41355e7bfe28f367cf4afa39a7afcfeec2)
This adds a new renderer constraint enum:
COGL_RENDERER_CONSTRAINT_SUPPORTS_GLES2_CONTEXT
that can be used by applications to ensure the renderer they connect to
has support for creating a GLES2 context via cogl_gles2_context_new().
The cogl-gles2-context and cogl-gles2-gears examples and the conformance
tests have been updated to use this constraint.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit ed61463d7194354b26624e8014859f0fbfc06a12)
This makes it possible to integrate existing GLES2 code with
applications using Cogl as the rendering api.
Currently all GLES2 usage is handled with separate GLES2 contexts to
ensure that GLES2 api usage doesn't interfere with Cogl's own use of
OpenGL[ES]. The api has been designed though so we can provide tighter
integration later.
The api would allow us to support GLES2 virtualized on top of an
OpenGL/GLX driver as well as GLES2 virtualized on the core rendering api
of Cogl itself. Virtualizing the GLES2 support on Cogl will allow us to
take advantage of Cogl debugging facilities as well as let us optimize
the cost of allocating multiple GLES2 contexts and switching between
them which can both be very expensive with many drivers.
As as a side effect of this patch Cogl can also now be used as a
portable window system binding API for GLES2 as an alternative to EGL.
Parts of this patch are based on work done by Tomeu Vizoso
<tomeu.vizoso@collabora.com> who did the first iteration of adding GLES2
API support to Cogl so that WebGL support could be added to
webkit-clutter.
This patch adds a very minimal cogl-gles2-context example that shows how
to create a gles2 context, clear the screen to a random color and also
draw a triangle with the cogl api.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 4bb6eff3dbd50d8fef7d6bdbed55c5aaa70036a8)
This detects when we are running on any of Mesa's software rasterizer
backends and disables use of glBlitFramebuffer and glXCopySubBuffer.
Both of these currently result in full-screen copies so there's little
point in using these to optimize how much of the screen we present.
To help ensure we re-evaluate this workaround periodically we have added
a comment marker of "ONGOING BUG" above the workaround and added a note
to our RELEASING document that says we should grep for this marker and
write a NEWS section about ongoing bug workarounds.
https://bugzilla.gnome.org/show_bug.cgi?id=674208
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 11f2f6ebb42398978ec8dd92b3c332ae8140a728)
The stock 1.2.x version of SDL only supports regular OpenGL. The
version on WebOS is specially patched to add some extra API to request
a GLES1 or GLES2 context. This patch adds a configure check to detect
when Cogl is being built with the patched version of SDL. In that case
it will additionally allow the gles1 and gles2 drivers and set the
right video mode attributes to get the corresponding context.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 3726c60deab2bd94617a562abb63f735627a25e4)
The coding style has for a long time said to avoid using redundant glib
data types such as gint or gchar etc because we feel that they make the
code look unnecessarily foreign to developers coming from outside of the
Gnome developer community.
Note: When we tried to find the historical rationale for the types we
just found that they were apparently only added for consistent syntax
highlighting which didn't seem that compelling.
Up until now we have been continuing to use some of the platform
specific type such as gint{8,16,32,64} and gsize but this patch switches
us over to using the standard c99 equivalents instead so we can further
ensure that our code looks familiar to the widest range of C developers
who might potentially contribute to Cogl.
So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this
switches all Cogl code to instead use the int{8,16,32,64}_t and
uint{8,16,32,64}_t c99 types instead.
Instead of gsize we now use size_t
For now we are not going to use the c99 _Bool type and instead we have
introduced a new CoglBool type to use instead of gboolean.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
Removing CoglHandle has been an on going goal for quite a long time now
and finally this patch removes the last remaining uses of the CoglHandle
type and the cogl_handle_ apis.
Since the big remaining users of CoglHandle were the cogl_program_ and
cogl_shader_ apis which have replaced with the CoglSnippets api this
patch removes both of these apis.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0)
Since the original patch was done after removing deprecated API
this back ported patch doesn't affect deprecated API and so
actually this cherry-pick doesn't remove all remaining use of
CoglHandle as it did for the master branch of Cogl.
This re-works the SDL integration api to simplify the integration for
application developers and also allow Cogl to know when the application
is about to go idle waiting for events so it can perform idle
book-keeping work.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Instead of creating a dummy framebuffer allocation just so we can setup
crtc modes during display_setup we now wait until the first swap_buffers
request before setting up the crtc modes.
This patch also adds a cogl_kms_display_queue_modes_reset() function
that allows developers to explicitly queue a reset of the crtc modes.
The idea is that applications that handle VT switching can use this for
VT enter events to explicitly ensure their mode is restored since modes
are often not automatically restored correctly.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds support for mirroring the display output on two KMS
connectors.
This patch also checks for a number of environment variables that can
influence how KMS is configured. The following variables can be set:
COGL_KMS_MIRROR: If this is set to anything then Cogl will try and setup
two connectors with the same resolution so that onscreen frame buffers
can be mirrored.
COGL_KMS_CONNECTOR0: This can be set to an integer identifier for a
specific KMS connector id to use for the first output.
COGL_KMS_CONNECTOR0_MODE: Can be set to a mode name like "1024x768"
explicitly select what mode should be used for the first output.
If COGL_KMS_MIRROR is set then COGL_KMS_CONNECTOR1 and
COGL_KMS_CONNECTOR1_MODE can optionally be set to specify a connector id
and mode name for the second output.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The KMS EGL platform now notifies when a swap is complete. The
notification is delayed until the application calls
cogl_context_dispatch. The GLX backend doesn't currently do this but I
think that is how it should behave to make it easier for the
application to handle locks and such.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The KMS platform now uses drmModePageFlip to present the buffer. The
main loop mechanism is used to poll for events on the DRM file
descriptor so that we notice when the page flip is complete. The
swap_buffers is throttled so that if there is a pending flip it will
block until it is complete before starting another flip.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of creating FBOs on the GL side, the KMS EGL platform uses the
latest changes to Mesa to create an EGL surface using a GBM surface as
the native surface type. This removes some of the special vtable hooks
that the KMS platform needed because it is now much more similar to
the other platforms.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This interface represents any textures that are backed by a single
texture in GL and that can be used directly with the
cogl_framebuffer_draw_attributes family of functions. This currently
equates to CoglTexture2D, CoglTexture3D and CoglTextureRectangle.
The interface currently has only one method called
cogl_primitive_set_auto_mipmap. This replaces the
COGL_TEXTURE_NO_AUTO_MIPMAP flag from the CoglTextureFlags parameter
in the constructors. None of the other flags in CoglTextureFlags make
sense for primitive textures so it doesn't seem like a good idea to
need them for primitive constructors.
There is a boolean in the vtable to mark whether a texture type is
primitive which the new cogl_is_primitive function uses. There is also
a new texture virtual called set_auto_mipmap which is only required to
be implemented for primitive textures.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
We initially assumed that copy_sub_buffer is synchronized on
which is only the case for a subset of GPUs for example it is not
synchronized on INTEL gen6 and gen7, so we remove this assumption
for now.
We should have a specific driver / GPU whitelist if we want to enable
this.
https://bugzilla.gnome.org/show_bug.cgi?id=669122
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This option to GCC makes it give a warning whenever a global function
is defined without a declaration. This should catch cases were we've
defined a function but forgot to put it in a header. In that case it
is either only used within one file so we should make it static or we
should declare it in a header.
The following changes where made to fix problems:
• Some functions were made static
• cogl-path.h (the one containing the 1.0 API) was split into two
files, one defining the functions and one defining the enums so that
cogl-path.c can include the enum and function declarations from the
2.0 API as well as the function declarations from the 1.0 API.
• cogl2-clip-state has been removed. This only had one experimental
function called cogl_clip_push_from_path but as this is unstable we
might as well remove it favour of the equivalent cogl_framebuffer_*
API.
• The GLX, SDL and WGL winsys's now have a private header to define
their get_vtable function instead of directly declaring in the C
file where it is called.
• All places that were calling COGL_OBJECT_DEFINE need to have the
cogl_is_whatever function declared so these have been added either
as a public function or in a private header.
• Some files that were not including the header containing their
function declarations have been fixed to do so.
• Any unused error quark functions have been removed. If we later want
them we should add them back one by one and add a declaration for
them in a header.
• _cogl_is_framebuffer has been renamed to cogl_is_framebuffer and
made a public function with a declaration in cogl-framebuffer.h
• Similarly for CoglOnscreen.
• cogl_vdraw_indexed_attributes is called
cogl_framebuffer_vdraw_indexed_attributes in the header. The
definition has been changed to match the header.
• cogl_index_buffer_allocate has been removed. This had no declaration
and I'm not sure what it's supposed to do.
• CoglJournal has been changed to use the internal CoglObject macro so
that it won't define an exported cogl_is_journal symbol.
• The _cogl_blah_pointer_from_handle functions have been removed.
CoglHandle isn't used much anymore anyway and in the few places
where it is used I think it's safe to just use the implicit cast
from void* to the right type.
• The test-utils.h header for the conformance tests explicitly
disables the -Wmissing-declaration option using a pragma because all
of the tests declare their main function without a header. Any
mistakes relating to missing declarations aren't really important
for the tests.
• cogl_quaternion_init_from_quaternion and init_from_matrix have been
given declarations in cogl-quaternion.h
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The Wayland winsys defines functions declared in
cogl-wayland-renderer.h so it should include the header to make sure
the declarations are right. This was breaking because currently the
header #defines the _EXP suffixes on to the function names so it would
end up exporting the wrong symbol names.
This adds api for explicitly choosing what underlying driver cogl should
use internally for rendering as well as api for querying back what
driver is actually in use.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This also replaces use of CoglHandle with a CoglTexturePixmapX11 type
instead.
This patch also ensures the CoglTexturePixmapX11 constructor take an
explicit CoglContext pointer and can return a GError consistent with
other CoglTexture constructors.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The cogl.h header is meant to be the public header for including the 1.x
api used by Clutter so we should stop using that as a convenient way to
include all likely prototypes and typedefs. Actually we already do a
good job of listing the specific headers we depend on in each of the .c
files we have so mostly this patch just strip out the redundant
includes for cogl.h with a few fixups where that broke the build.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
