Clarifies that if you give COGL_PIXEL_FORMAT_ANY as the internal format for
cogl_texture_new_from_file or cogl_texture_new_from_data then Cogl will
choose a premultiplied internal format.
cogl_texture_new_from_data lets you specify a source format for the users given
data, and an internal format which the user wants the GPU to see. This unit
test verifies that the users data is premultiplied, un-premultiplied or
left alone for a number of (source format, internal format) pairs.
cogl_texture_set_region allows specifying a source format, and the internal
format is determined from the texture being updated. As above we test
a number of format pairs and check Cogl is converting data correctly.
The test verifies that if the user allows COGL_FORMAT_ANY for the
internal_format then by default Cogl will choose a premultipled format for
RGBA textures.
Note: Currently this only tests cogl_texture_new_from_data and
cogl_texture_set_region, we should also test cogl_texture_new_from_file,
cogl_texture_new_from_bitmap and cogl_texture_new_from_foreign.
The fixed function fogging provided by OpenGL only works with unmultiplied
colors (or if the color has an alpha of 1.0) so since we now premultiply
textures and colors by default a note to this affect has been added to
clutter_stage_set_fog and cogl_set_fog.
test-depth.c no longer uses clutter_stage_set_fog for this reason.
In the future when we can depend on fragment shaders we should also be
able to support fogging of premultiplied primitives.
This test assumes that the textures will be stored internally with exactly
the color given so that specific texture combining arithmetic can be
tested. Using COGL_PIXEL_FORMAT_ANY allows Cogl to internally premultiply
the textures, so we have to explicitly request an unmultiplied format.
We don't want to force texture data to be premultipled if the user
explicitly specifies a non premultiplied internal_format such as
COGL_PIXEL_FORMAT_RGBA_8888. So now Cogl will only automatically
premultiply data when COGL_PIXEL_FORMAT_ANY is given for the
internal_format, or a premultiplied internal format such as
COGL_PIXEL_FORMAT_RGBA_8888_PRE is requested but non-premultiplied source
data is given.
This approach is consistent with OpenVG image formats which have already
influenced Cogl's pixel format semantics.
The _cogl_unpremult_alpha_{first,last} functions which
_cogl_bitmap_fallback_unpremult depends on were incorrectly casting each
of the byte components of a texel to a gulong and performing shifts as
if it were dealing with the whole texel.
It now just uses array indexing to access the byte components without
needing to cast or manually shift any bits around.
Even though we used to depend on unpremult whenever we used a
ClutterCairoTexture, clutter_cairo_texture_context_destroy had it's own
unpremult code which worked which is why this bug wouldn't have been noticed
before.
Now that we typically have premultiplied data stored in Cogl
textures, when fetching a texture into local data for temporary
storage, use a premultiplied format to avoid an unpremultiply/
premultiply roundtrip.
http://bugzilla.openedhand.com/show_bug.cgi?id=1406
Signed-off-by: Robert Bragg <robert@linux.intel.com>
Instead of unpremultiplying the Cairo data, pass it directly to Cogl
in premultiplied form; we now *prefer* premultiplied data.
http://bugzilla.openedhand.com/show_bug.cgi?id=1406
Signed-off-by: Robert Bragg <robert@linux.intel.com>
Many operations, like mixing two textures together or alpha-blending
onto a destination with alpha, are done most logically if texture data
is in premultiplied form. We also have many sources of premultiplied
texture data, like X pixmaps, FBOs, cairo surfaces. Rather than trying
to work with two different types of texture data, simplify things by
always premultiplying texture data before uploading to GL.
Because the default blend function is changed to accommodate this,
uses of pure-color CoglMaterial need to be adapted to add
premultiplication.
gl/cogl-texture.c gles/cogl-texture.c: Always premultiply
non-premultiplied texture data before uploading to GL.
cogl-material.c cogl-material.h: Switch the default blend functions
to ONE, ONE_MINUS_SRC_ALPHA so they work correctly with premultiplied
data.
cogl.c: Make cogl_set_source_color() premultiply the color.
cogl.h.in color-material.h: Add some documentation about
premultiplication and its interaction with color values.
cogl-pango-render.c clutter-texture.c tests/interactive/test-cogl-offscreen.c:
Use premultiplied colors.
http://bugzilla.openedhand.com/show_bug.cgi?id=1406
Signed-off-by: Robert Bragg <robert@linux.intel.com>
cogl-bitmap.c cogl-bitmap-pixbuf.c cogl-bitmap-fallback.c cogl-bitmap-private.h:
Add _cogl_bitmap_can_premult(), _cogl_bitmap_premult() and implement
a reasonably fast implementation in the "fallback" code.
http://bugzilla.openedhand.com/show_bug.cgi?id=1406
Signed-off-by: Robert Bragg <robert@linux.intel.com>
RGBA data in X pixmaps and in FBOs is already premultiplied; use
the right format when creating cogl textures.
http://bugzilla.openedhand.com/show_bug.cgi?id=1406
Signed-off-by: Robert Bragg <robert@linux.intel.com>
Since commit d743aeaa updated the internal copy of JSON-GLib and
added a new private header file, we need to fix the build to avoid
a distcheck failure.
Merge branch 'master-clock-updates'
* master-clock-updates: (22 commits)
Change the paint forcing on the Text cache text
[timelines] Improve marker hit check and don't fudge the delta
Revert "[timeline] Don't clamp the elapsed time when a looping tl reaches the end"
[tests] Don't add a newline to the end of g_test_message calls
[test-timeline] Add a marker at the beginning of the timeline
[timeline] Don't clamp the elapsed time when a looping tl reaches the end
[master-clock] Throttle if no redraw was performed
[docs] Update Clutter's API reference
Force a paint instead of calling clutter_redraw()
Fix clutter_redraw() to match the redraw cycle
Run the repaint functions inside the redraw cycle
Remove useless manual timeline ticking
Move elapsed-time calculations into ClutterTimeline
Limit the frame rate when not syncing to VBLANK
Decrease the main-loop priority of the frame cycle
Avoid motion-compression in test-picking test
Compress events as part of the frame cycle
Remove stage update idle and do updates from the master clock
Call g_main_context_wakeup() when we start running timelines
Remove unused msecs_delta member
...
The changes in the master clock and the repaint cycle have been
changed, and broke the way the test for the Text actor cache of
PangoLayouts forces a redraw.
We have to call clutter_actor_paint() on the Stage embedding the
Text actor we want to test; this is kinda fugly because if the
Layout has changed it will end up causing a reallocation cycle
in the middle of the Text actor paint. Since it's a test case,
and since forcing redraws is a bit of a hack as well, we can
close both our eyes on that.
Markers added at the start of the timeline need to be special cased
because we effectively check whether the marker time is greater than
the old frame time or less than or equal to the new frame time but we
never actually emit a frame for the start of the timeline.
If the timeline is looping then it adjusts the position to interpolate
a wrapped around position. However we do not emit a new frame after
setting this position so we need to check for markers again there.
clutter_timeline_get_delta should return the actual wall clock time
between emissions of the new-frame signal - even if the elapsed time
has been fudged at the end of the timeline. To make this work it no
longer directly manipulates priv->msecs_delta but instead passes a
delta value to check_markers.
Someone might hide the previously focused actor in the focus-out signal
handler and as key focus still appears to be on that actor we'd get
re-entrant call and get glib critical from g_object_weak_unref
This changes clutter_stage_get_key_focus() to return stage/NULL during
focus-out signal emission. It used to be the actor focus-out was being
emitted on.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1547
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This reverts commit 9c5663d671.
The patch was causing problems for applications that expect the
elapsed_time to be at either end of the timeline when the completed
signal is fired. For example test-behave swaps the direction of the
timeline in the completed handler but if the time has overflowed the
end then the timeline would only take a short time to get back the
beginning. This caused the animation to just vibrate around the
beginning.
The new-frame signal of a timeline was previously guaranteed to be
emitted with the elapsed_time set to the end before it emits the
completed signal. This doesn't necessarily make sense for looping
timelines because it would cause the elapsed time to be clamped to a
slightly off value whenever the timeline restarts. This patch makes it
perform the wrap around before emitting the new-frame signal so that
the elapsed time always corresponds to the time elapsed since the
timeline was started.
Additionally it no longer fudges the msecs_delta property to make the
marker check work so clutter_timeline_get_delta will always return the
wall clock time since the last frame.
A flag in the master clock is now set whenever the dispatch caused an
actual redraw of a stage. If this flag is not set during the prepare
and check functions then it will resort to limiting the redraw
attempts to the default frame rate as if vblank syncing was
disabled. Otherwise if a timeline is running that does not cause the
scene to change then it would busy-wait with 100% CPU until the next
frame.
This fix was suggested by Owen Taylor in:
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
We do not need the whole redraw machinery inside
clutter_stage_read_pixels(): instead, we want Clutter to drop everything,
paint and call glReadPixels() with the current buffer.
The clutter_redraw() function is used by embedding toolkits to
force a redraw on a stage. Since everything is performed by
toggling a flag inside the Stage itself and then letting the
master clock advance, we need a ClutterStage method to ensure
that we start the master clock and redraw.
The master clock now works fine whether or not there are any stages,
so in the timeline conformance tests don't need to set up their
own times.
Set CLUTTER_VBLANK=none for the conformance tests, which in addition
to removing an test-environment dependency, will result in the ticking
for timeline tests being throttled to the default frame rate.
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Instead of calculating a delta in the master clock, and passing that
into each timeline, make each timeline individually responsible for
remembering the last time and computing the delta.
This:
- Fixes a problem where we could spin infinitely processing
timeline-only frames with < 1msec differences.
- Makes timelines consistently start timing on the first frame;
instead of doing different things for the first started timeline
and other timelines.
- Improves accuracy of elapsed time computations by avoiding
accumulating microsecond => millisecond truncation errors.
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
clutter-master-clock.c clutter-master-clock.h: When the
SYNC_TO_VBLANK feature is not available, wait for 1/frame_rate
seconds since the start of the last frame before drawing the next
frame. Add _clutter_master_clock_start_running() to abstract
the usage of g_main_context_wakeup()
clutter-stage.c: Add _clutter_master_clock_start_running()
clutter-main.c: Update docs for clutter_set_default_frame_rate()
clutter_get_default_frame_rate() to no longer talk about timeline
frame rates.
test-text-perf.c test-text.c: Set a frame rate of 1000fps so that
frame-rate limiting doesn't affect the result.
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Change CLUTTER_PRIORITY_REDRAW to be lower than the GTK+ resize
and relayout priorities to avoid starving GTK+ when run in the
same process as clutter.
Remove the unused CLUTTER_PRIORITY_TIMELINE
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Using clutter_stage_get_actor_at_pos() rather than synthesizing
events; the synthesized events were being compressed, so we were
only tesitng one pick per frame.
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Instead of trying to guess about which motion events are
extraneous, queue up all events until we process a frame.
This allows us to look ahead and reliably compress consecutive
sequence of motion events.
clutter-main.c: Feed received events to the stage for queueing.
Remove old compression code. Remove clutter_get_motion_events_frequency()
clutter_set_motion_events_frequency()
clutter-stage.c: Keep a queue of pending events.
clutter-master-clock.c: Add processng of queued events to the
clock source dispatch function.
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When a redraw is queued on a stage, simply set a flag; then in
the check/prepare functions of the master clock source, check
for stages that need redrawing.
This avoids the complexity of having multiple competing sources
at the same priority and makes the update ordering more reliable and
understandable.
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If a timeline is added from a different thread, we need to
call g_main_context_wakeup() to wake the main thread up to
start updating the timeline.
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Instead of keeping a list of all timelines, and connecting to
signals and weak notifies, simply keep a list of running timelines;
this greatly simplifies both the book-keeping, and also determining
if there are any running timelines.
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Remove code to advance the master clock after drawing a frame; if
there are any running timelines the master clock will do another
frame by itself, and the clock will be advanced before running
that frame.
With this change, there is no point in queueing an extra frame
redraw after completing a timeline, since we are always advancing
the timeline *before* redrawing, so remove that code as well.
(This does mean that calling clutter_timeline_stop() won't implicitly
cause the stage to be redrawn; this doesn't seem like something
an app should rely on in any case.)
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The clutter_stage_fullscreen() and clutter_stage_unfullscreen() are
a GDK-ism. The underlying implementation is already using an accessor
with a boolean parameter.
This should take the amount of collisions between properties, methods
and signals to zero.
The :fullscreen property is very much confusing as it is implemented.
It can be written to a value, but the whole process might fail. If we
set:
g_object_set (stage, "fullscreen", TRUE, NULL);
and the fullscreen process fails or it is not implemented, the value
will be reset to FALSE (if we're lucky) or left TRUE (most of the
times).
The writability is just a shorthand for invoking clutter_stage_fullscreen()
or clutter_stage_unfullscreen() depending on a boolean value without
using an if.
The :fullscreen property also greatly confuses high level languages,
since the same symbol is used:
- for a method name (Clutter.Stage.fullscreen())
- for a property name (Clutter.Stage.fullscreen)
- for a signal (Clutter.Stage::fullscreen)
For these reasons, the :fullscreen should be renamed to :fullscreen-set
and be read-only. Implementations of the Stage should only emit the
StageState event to change from normal to fullscreen, and the Stage
will automatically update the value of the property and emit a notify
signal for it.
Instead of blacklisting experimental features at the end we can
explicitly mark backends and image backends near their checks and
provide a summary at the end.
There have been changes in JSON-GLib upstream to clean up the
data structures, and facilitate introspection.
We still not use the updated JsonParser with the (private) JsonScanner
code, since it's a fork of GLib's GScanner.
