A simple, GLSL shader-based blur effect.
The blur shader is taken straight from the test-shader.c interactive
test case. It's a fairly clunky, inefficient and visually incorrect
implementation of a box blur, but it's all we have right now until I
figure out a way to do multi-pass shading with the current API.
The ShaderEffect class is an abstract base type for shader-based
effects. GLSL-based effects should be implemented by sub-classing
ShaderEffect and overriding ActorMeta::set_actor() to set the source
code of the shader, and Effect::pre_paint() to update the uniform
values, if any.
The ShaderEffect has a generic API for sub-classes to set the values
of the uniforms defined by their shaders, and it uses the shader
types we defined for ClutterShader, to avoid re-inventing the wheel
every time.
The OffscreenEffect class is meant to be used to implement Effect
sub-classes that create an offscreen framebuffer and redirect the
actor's paint sequence there. The OffscreenEffect is useful for
effects using fragment shaders.
Any shader-based effect being applied to an actor through an offscreen
buffer should be used before painting the resulting target material and
not for every actor. This means that doing:
pre_paint: cogl_program_use(program)
set up offscreen buffer
paint: [ actors ] → offscreen buffer → target material
post_paint: paint target material
cogl_program_use(null)
Is not correct. Unfortunately, we cannot really do:
post_paint: cogl_program_use(program)
paint target material
cogl_program_use(null)
Because the OffscreenEffect::post_paint() implementation also pops the
offscreen buffer and re-instates the previous framebuffer:
post_paint: cogl_program_use(program)
change frame buffer ← ouch!
paint target material
cogl_program_use(null)
One way to fix it is to allow using the shader right before painting
the target material - which means adding a new virtual inside the
OffscreenEffect class vtable in additions to the ones defined by the
parent Effect class.
The newly-added paint_target() virtual allows the correct sequence of
actions by adding an entry point for sub-classes to wrap the "paint
target material" operation with custom code, in order to implement the
case above correctly as:
post_paint: change frame buffer
cogl_program_use(program)
paint target material
cogl_program_use(null)
The added upside is that sub-classes of OffscreenEffect involving
shaders really just need to override the prepare() and paint_target()
virtuals, since the pre_paint() and post_paint() do all that's needed.
ClutterEffect is an abstract class that should be used to apply effects
on generic actors.
The ClutterEffect class just defines what an effect should implement; it
could be defined as an interface, but we might want to add some default
behavior dependent on the internal state at a later point.
The effect API applies to any actor, so we need to provide a way to
assign an effect to an actor, and let ClutterActor call the Effect
methods during the paint sequence.
Once an effect is attached to an actor we will perform the paint in this
order:
• Effect::pre_paint()
• Actor::paint signal emission
• Effect::post_paint()
Since an effect might collide with the Shader class, we either allow a
shader or an effect for the time being.
When getting the relative modelview matrix we need to reset it to the
stage's initial state or, at least, initialize it to the identity
matrix, instead of assuming we have an empty stack.
This replaces the use of CoglHandle with strongly type CoglClipStack *
pointers instead. The only function not converted for now is
cogl_is_clip_stack which will be done in a later commit.
This replaces the use of CoglHandle with strongly type CoglBitmap *
pointers instead. The only function not converted for now is
cogl_is_bitmap which will be done in a later commit.
This replaces the use of CoglHandle with strongly type CoglPath *
pointers instead. The only function not converted for now is
cogl_is_path which will be done in a later commit.
This patch makes it so that only the backwards compatibility
COGL_HANDLE_DEFINE macro defines a _cogl_xyz_handle_new function. The
new COGL_OBJECT_DEFINE macro only defines a _cogl_xyz_object_new
function.
It's valid C to declare a function omitting it prototype, but it seems
to be a good practise to always declare a function with its
corresponding prototype.
While this is totally fine (None is 0L and, in the pointer context, will
be converted in the right internal NULL representation, which could be a
value with some bits to 1), I believe it's clearer to use NULL instead
of None when we talk about pointers.
While this is totally fine (0 in the pointer context will be converted
in the right internal NULL representation, which could be a value with
some bits to 1), I believe it's clearer to use NULL in the pointer
context.
It seems that, in most case, it's more an overlook than a deliberate
choice to use FALSE/0 as NULL, eg. copying a _COGL_GET_CONTEXT (ctx, 0)
or a g_return_val_if_fail (cond, 0) from a function returning a
gboolean.
This replaces the use of CoglHandle with strongly type CoglBuffer *
pointers instead. The only function not converted for now is
cogl_is_buffer which will be done in a later commit.
CoglHandle is a common source of complaints and confusion because people
expect a "handle" to be some form of integer type with some indirection
to lookup the corresponding objects as opposed to a direct pointer.
This patch starts by renaming CoglHandle to CoglObject * and creating
corresponding cogl_object_ APIs to replace the cogl_handle ones.
The next step though is to remove all use of CoglHandle in the Cogl APIs
and replace with strongly typed pointer types such as CoglMaterial * or
CoglTexture * etc also all occurrences of COGL_INVALID_HANDLE can just
use NULL instead.
After this we will consider switching to GTypeInstance internally so we
can have inheritance for our types and hopefully improve how we handle
bindings.
Note all these changes will be done in a way that maintains the API and
ABI.
in create_pick_material we were using a static boolean to gate when we
show a warning, but that would mean if the problem recurs between
different textures then the warning will only be shown once. We now have
a private bitfield flag instead, just so we don't spew millions of
warnings if the problem is recurring.
This adds a boolean "pick-with-alpha" property to ClutterTexture and when
true, it will use the textures alpha channel to define the actors shape when
picking.
Users should be aware that it's a bit more expensive to pick textures like
this (so probably best not to blindly enable it on *all* your textures)
since it implies rasterizing the texture during picking whereas we would
otherwise just send a solid filled quad to the GPU. It will also interrupt
the internal batching of geometry for pick renders which can otherwise often
be done in a single draw call.
Since the default alpha test function of GL_ALWAYS is equivalent to
GL_ALPHA_TEST being disabled we don't need to worry about Enabling/Disabling
it when flushing material state, instead it's enough to leave it always
enabled. We will assume that any driver worth its salt wont incur any
additional cost for glEnable (GL_ALPHA_TEST) + GL_ALWAYS vs
glDisable (GL_ALPHA_TEST).
This patch simply calls glEnable (GL_ALPHA_TEST) in cogl_create_context
clutter_texture_paint shouldn't need to optimize the case where
paint_opacity == 0 and bailout, since we've been doing this optimization for
all actors in clutter_actor_paint for a while now.
When _cogl_disable_other_texcoord_arrays is called it disables the
neccessary texcoord arrays and then removes the bits for the disabled
arrays in ctx->texcoord_arrays_enabled. However none of the places
that call the function then set any bits in ctx->texcoord_arrays_enabled
so the arrays would never get marked and they would never get disabled
again.
This patch just changes it so that _cogl_disable_other_texcoord_arrays
also sets the corresponding bits in ctx->texcoord_arrays_enabled.
Since emit_drag_end() can be called from a MOTION event capture we
cannot call clutter_event_get_button(). We should, instead, use the
press_button value because if we're emitting ::drag-end it means we
also emitted ::drag-begin and the value is valid.
We need to tell the introspection scanner all the dependencies we
require, including the pkg-config name to use when compiling the
GIR file into a typelib object.
New virtual functions cannot go wherever they want, if we need to
preserve the ABI.
Also, the coding style should match the rest of ClutterActor and
Clutter's own coding style.
When destroying an Actor the various ActorMeta instance should already
be disposed - unless something is holding a reference to them, in which
case we should use the ::destroy signal to unset the ActorMeta:actor
back pointer.
ClickAction adds "clickable" semantics to an actor. It provides all
the business logic to emit a high-level "clicked" signal from the
various low-level signals inside ClutterActor.
The DragAction should, by default, drag the actor to which it has been
applied, instead of delegating what to do to the developer. If custom
code need to override it, g_signal_stop_emission_by_name() can be called
to stop the default handler to ever running.
Instead of directly using a guint32 to store a bitmask for each used
texcoord array, it now stores them in a CoglBitmask. This removes the
limitation of 32 layers (although there are still other places in Cogl
that imply this restriction). To disable texcoord arrays code should
call _cogl_disable_other_texcoord_arrays which takes a bitmask of
texcoord arrays that should not be disabled. There are two extra
bitmasks stored in the CoglContext which are used temporarily for this
function to avoid allocating a new bitmask each time.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
This implements a growable array of bits called CoglBitmask. The
CoglBitmask is intended to be cheap if less than 32 bits are used. If
more bits are required it will allocate a GArray. The type is meant to
be allocated on the stack but because it can require additional
resources it also has a destroy function.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
Previously the counter for the number of layers was only updated
whenever the texture handle for a layer changes. However there are
many other ways for a new layer to be created for example by setting a
layer combine constant. Also by default the texture on a layer is
COGL_INVALID_HANDLE so if the application tries to create an explicit
layer with no texture by calling cogl_material_set_layer with
COGL_INVALID_HANDLE then it also wouldn't update the count.
This patch fixes that by incrementing the count in
cogl_material_get_layer instead. This function is called by all
functions that may end up creating a layer so it seems like the most
appropriate place.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
It should be quite acceptable to use a texture without defining any
texture coords. For example a shader may be in use that is doing
texture lookups without referencing the texture coordinates. Also it
should be possible to replace the vertex colors using a texture layer
without a texture but with a constant layer color.
enable_state_for_drawing_buffer no longer sets any disabled layers in
the overrides. Instead of counting the number of units with texture
coordinates it now keeps them in a mask. This means there can now be
gaps in the list of enabled texture coordinate arrays. To cope with
this, the Cogl context now also stores a mask to track the enabled
arrays. Instead of code manually iterating each enabled array to
disable them, there is now an internal function called
_cogl_disable_texcoord_arrays which disables a given mask.
I think this could also fix potential bugs when a vertex buffer has
gaps in the texture coordinate attributes that it provides. For
example if the vertex buffer only had texture coordinates for layer 2
then the disabling code would not disable the coordinates for layers 0
and 1 even though they are not used. This could cause a crash if the
previous data for those arrays is no longer valid.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
Added the implementation for clutter_actor_get_accessible, virtual
ClutterActor function, used to obtain the accessible object of
any ClutterActor.
As it is defined virtual, it would be possible to redefine it, so
any custom clutter actor could implement their accessibility object,
withouth relying totally on a accessibility implementation module.
See gtkiconview as example.
http://bugzilla.openedhand.com/show_bug.cgi?id=2070
ClutterInterval.compute_value() computes the new value given a progress
and copies it to a given GValue. Since most of the time we want to pass
that very same value to another function that copies it again, we should
have a compute_value() variant that stores that computed value inside
ClutterInterval and returns a pointer to it. This way we initialize the
result GValue just once and we never copy it, as long as the Interval
instance is valid.
* wip/state-machine:
Do not use wildcards in test-state
script: Implement State deserialization
state: added a "target-state" property
state: documented data structures
Add State interactive tests to the ignore file
state: Documentation and introspection annotation fixes
state: Minor coding style fixes
state: Clean up the header's documentation
state: Constify StateKey accessors
Do not include clutter.h from a Clutter header file
state-machine: made clutter_state_change take a boolean animate argument
state-machine: use clutter_timeline_get_progress
state-machine: add completed signal
state machine: added state machine
Conflicts:
.gitignore
* wip/constraints: (24 commits)
Add the Cogl API reference to the fixxref extra directories
Document the internal MetaGroup class
Remove the construct-only flag from ActorMeta:name
doc: Remove gtk-doc annotations from the json-glib copy
doc: Fix parameter documentation
Add named modifiers for Action and Constraint
Remove a redundant animation
Set the stage resizable in test-constraints
Use a 9 grid for the constraints test
Miscellaneous documentation fixes
docs: Document animating action and constraint properties
docs: Document BindConstraint and AlignConstraint
constraint: Rename BindConstraint:bind-axis
constraints: Add AlignConstraint
tests: Add a constraints interactive test
constraint: Add BindConstraint
actor: Implement Animatable
animation: Use the new Animatable API for custom properties
animatable: Add custom properties to Animatable
constraint: Add ClutterConstraint base class
...
Conflicts:
configure.ac
This adds a math utility API for handling 3 component, single precision
float vectors with the following; mostly self explanatory functions:
cogl_vector3_init
cogl_vector3_init_zero
cogl_vector3_equal
cogl_vector3_equal_with_epsilon
cogl_vector3_copy
cogl_vector3_free
cogl_vector3_invert
cogl_vector3_add
cogl_vector3_subtract
cogl_vector3_multiply_scalar
cogl_vector3_divide_scalar
cogl_vector3_normalize
cogl_vector3_magnitude
cogl_vector3_cross_product
cogl_vector3_dot_product
cogl_vector3_distance
Since the API is experimental you will need to define
COGL_ENABLE_EXPERIMENTAL_API before including cogl.h if you want to use
the API.
The ClutterActor API should have modifier methods for adding, removing
and retrieving Actions and Constraints using the ClutterActorMeta:name
property - mostly, for convenience.
This stubs out an xlib event handling mechanism for Cogl. The intention
is for Clutter to use this to forward all x11 events to Cogl. As we move
winsys functionality down into Cogl, Cogl will become responsible for
handling a number of X events: ConfigureNotify events for onscreen
framebuffers, swap events and Damage events for cogl_x11_texture_pixmap.
AlignConstraint is a simple constraint that keeps an actor's position
aligned to the width or height of another actor, multiplied by an
alignment factor.
By implementing the newly added support for custom animatable
properties, we can allow addressing action and constraint properties
from ClutterAnimation and clutter_actor_animate().
The Animation class should use the Animatable API for custom properties
to override finding a property definition, getting the initial state and
setting the final state of an object.
The Constraint base, abstract class should be used to implement Actor
modifiers that affect the way an actor is sized or positioned inside a
fixed layout manager.
Commit e2a990d renamed these types to new names from EGL 1.3. However
it still works to use the old names under EGL 1.3 so let's just use
those to keep compatibility.
clutter_backend_egl_dispose now chains up before disposing its own
resources so that ClutterBackendX11 will destroy all of the stages
before we destroy the egl context. Otherwise the actors may try to
make GL calls during destruction which causes a crash.
Some EGL drivers, such as the PowerVR simulator (and some proprietary drivers)
return zero when the EGLConfig is queried for the EGL_NATIVE_VISUAL_ID
attribute via eglGetConfigAttrib().
This patch detects and attempts to work around that situation by picking a
visual with the same color depth.
http://bugzilla.openedhand.com/show_bug.cgi?id=2123
After the EGL context is created it now also creates an invisible 1x1
window and a corresponding surface so that the context can be
immediately made current. This is similar to changes for the GLX
backend introduced in d2c091e62.
http://bugzilla.openedhand.com/show_bug.cgi?id=2056
DragAction is an Action sub-class that provides dragging capabilities to
any actor. DragAction has:
• drag-begin, drag-motion and drag-end signals, relaying the event
information like coordinates, button and modifiers to user code;
• drag-threshold property, for delaying the drag start by a given
amount of pixels;
• drag-handle property, to allow using other actors as the drag
handle.
• drag-axis property, to allow constraining the dragging to a specific
axis.
An interactive test demonstrating the various features is also provided.
ClutterAction is an abstract class that should be used as the ancestor
for objects that change how an actor behaves when dealing with events
coming from user input.
ClutterActorMeta is a base, abstract class that can be used to derive
classes that are attached to a ClutterActor instance in order to modify
the way an actor is painted, sized/positioned or responds to events.
A typed container for ActorMeta instances is also provided to the
sub-classes can be attached to an Actor.
Previously it would only try to set the blend equation if the RGB and
alpha blending functions were different. However it's completely valid
to use a non-standard blending function when the functions are the
same. This patch moves the blending equation to outside the if
statement.
Previously it would only set the blend constant if glBlendFuncSeparate
was used but it is perfectly acceptable to use the blend constant when
the same factor is used for each. It now sets the blend constant
whenever one of the factors would use the constant.
When a single statement is used to specify the factors for both the
RGB and alpha parts it previously split up the statement into
two. This works but it ends up unnecessarily using glBlendFuncSeparate
when glBlendFunc would suffice.
For example, the blend statement
RGBA = ADD(SRC_COLOR*(SRC_COLOR), DST_COLOR*(1-SRC_COLOR))
would get split into the two statements
RGBA = ADD(SRC_COLOR*(SRC_COLOR[RGB]), DST_COLOR*(1-SRC_COLOR[RGB]))
A = ADD(SRC_COLOR*(SRC_COLOR[A]), DST_COLOR*(1-SRC_COLOR[A]))
That translates to:
glBlendFuncSeparate (GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR,
GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
This patch makes it so that arg_to_gl_blend_factor can handle the
combined RGBA mask instead. That way the single statement gets
translated to the equivalent call:
glBlendFunc (GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR);
If a cached layout didn't actually match the layout we're looking for,
it would be returned anyway. Remove this return so that it can correctly
continue looking and get a cache miss if appropriate.
http://bugzilla.openedhand.com/show_bug.cgi?id=2109
Previously a path copy was implemented such that only the array of
path nodes was shared with the source and the rest of the data is
copied. This was so that the copy could avoid a deep copy if the
source path is appended to because the copy keeps track of its own
length. This optimisation is probably not worthwhile because it makes
the copies less cheap. Instead the CoglPath struct now just contains a
single pointer to a new CoglPathData struct which is separately
ref-counted. When the path is modified it will be copied if the ref
count on the data is not 1.
This patch combines a number of fixes and improvements to the
layout caching logic in ClutterText.
* Fix: The width must always be set on the PangoLayout when painting.
This is necessary because the layout aligns in the width, and
even when we think we are left-aligned, the auto-dir feature
of PangoLayout may result in right-alignment.
* Fix: We should only ever try to reuse a cached layout based
on its logical width if layout.width was -1 when computing
that logical width. If the layout was already ellipsized,
then comparing the logical width to the new width we are
trying to wrap to doesn't make sense. (If "abc" ellipsizes
to a 15-pixel wide "..." for a width of 1 pixel, that doesn't
mean that we should use "..." for a width of 15 pixels. Maybe
"abc" itself is 15 pixels wide.)
* Improvement: rather than looking up cached layouts based on the
input allocation_width/allocation_height, look them up based
on the actual width/height/ellipsize that we pass to create
a layout. This is simpler and improves the chance we'll get
a cache hit when appropriate even if there are small floating
point differences.
Note because of the first fix this is less aggressive than dd40732
in caching layouts; get_preferred_width() and painting can't share
a layout since get_preferred_width() needs to pass a width of -1
to Pango and painting needs to pass the real width.
The patch has been updated from the clutter-1.2 branch to current
master; using the profiling instrumentation it is possible to verify
with test-text-field that the hit/miss counters go from:
Name Total Per Frame
---- ----- ---------
Text layout cache hit counter 13 6
Text layout cache miss counter 11 5
before applying the patch, to:
Name Total Per Frame
---- ----- ---------
Text layout cache miss counter 4 2
Text layout cache hit counter 3 1
after applying the patch.
https://bugzilla.gnome.org/show_bug.cgi?id=618104http://bugzilla.openedhand.com/show_bug.cgi?id=2109
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This reverts commit 716ec82db8.
The Cogl pixel buffer API currently has problems if an atlas texture
is created or the format needs to be converted. The atlas problem
doesn't currently show because the atlas rejects BGR textures anyway
but we may want to change this soon. The problem with format
conversion would happen under GLES because that does not support BGR
textures at all so Cogl has to do the conversion. However it doesn't
currently show either because GLES has no support for buffer objects
anyway.
It's also questionable whether the patch would give any performance
benefit because Cairo needs read/write access which implies the buffer
can't be put in write-optimised memory.
Conflicts:
clutter/clutter-cairo-texture.c
http://bugzilla.openedhand.com/show_bug.cgi?id=1982
Since framebuffer state is not flushed prior to replaying the journal,
the trick of marking the framebuffer dirty prior to calling
glBindFramebuffer() doesn't work... the outstanding journal entries
will get replayed to the newly created framebuffer.
Fix this by flushing the journal as well.
http://bugzilla.openedhand.com/show_bug.cgi?id=2110
Signed-off-by: Robert Bragg <robert@linux.intel.com>
In clutter_cairo_texture_create_region it tries to destroy the old
texture before mapping the PBO by setting the texture on the first
layer of the material to COGL_INVALID_HANDLE. However it was using the
material API incorrectly so it ended up showing a warning and doing
nothing.
If the clip stack is empty then _cogl_clip_stack_flush exits
immediately. This was missing out the assignment of *stencil_used_p at
the bottom of the function. If a path is then used after the clip is
cleared then it would think it needs to merge with the clip so the
stencil would not be cleared correctly.
The code for implementing ClutterColor as GParamSpec and the
color↔string transformation functions were assuming that ClutterColor
owns the data in the GValue struct and directly reading
data[0].v_pointer to get a pointer to the color. However ClutterColor
is actually a boxed type and the format of the data array is meant to
be internal to GObject so it is not safe to poke around in it
directly. This patch changes it to use g_value_get_boxed to get the
pointer.
Also, boxed types allow a NULL value to be stored and not all of the
code was coping with this. This patch also attempts to fix that.
http://bugzilla.openedhand.com/show_bug.cgi?id=2068
ClutterColor has long had a GTypeValueTable struct around and the
functions defined to be implemented as a fundamental type. However the
struct was never actually used anywhere and ClutterColor is actually
defined as a boxed type. This patch removes the table because it is
very confusing to have code lying around that is not used.
http://bugzilla.openedhand.com/show_bug.cgi?id=2068
Duplicate the existing ease-in/interpolation mode for the property when
removing, replacing the first key for a property or adding a new first
key for a property.
When inserting or modifying keys of a running animator the internal
iterators per property could go out of sync. Reinitializing the
iterators if the timeline is running avoids this.
Instead of using cogl_get_bitmasks() to query the GL machinery for the
size of the color bits, we should store the values inside the
CoglFramebuffer object and query them the first time we set the framebuffer
as the current one.
Currently, cogl_get_bitmasks() is re-implemented in terms of
cogl_framebuffer_get_*_bits(). As soon as we are able to expose the
CoglOnscreen framebuffer object in the public API we'll be able to
deprecate cogl_get_bitmasks() altogether.
http://bugzilla.openedhand.com/show_bug.cgi?id=2094
In 91cde78a7 I accidentally changed the function names that get looked
up for the framebuffer extension under GLES so that they didn't have
any suffix. The spec for extension specifies that they should have the
OES suffix.
A server that supports GLX_BufferSwapComplete will always send
these events, so we should just silently ignore them if we've
chosen not to take advantage of the INTEL_swap_event GLX
extension.
http://bugzilla.openedhand.com/show_bug.cgi?id=2102
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
clutter_container_create_child_meta() uses CLUTTER_IS_ACTOR on the
container parameter instead of the actor parameter.
http://bugzilla.openedhand.com/show_bug.cgi?id=2087
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Debugging code is not meant to be run in the nominal code path. Use
G_UNLIKELY to be reduce the number of bubbles in the instruction
pipeline.
Took the opportunity to re-indent the macros.
Whether events come from the main loop source or from
clutter_x11_handle_event(), we need to feed them to the backend
virtual handle_event function. This fixes problems with clients
using clutter_x11_handle_event() hanging because
GLXBufferSwapComplete events aren't received.
http://bugzilla.openedhand.com/show_bug.cgi?id=2101
When uploading texture data the cogl-texture-2d-sliced backend was
using _cogl_texture_prepare_for_upload to create a bitmap suitable for
upload but then it was using the original bitmap instead of the new
bitmap for the data. This was causing any format conversions performed
by cogl_texture_prepare_for_upload to be ignored.
http://bugzilla.openedhand.com/show_bug.cgi?id=2059
In commit abe91784c4 I changed cogl-texture so that it would use the
OpenGL mechanism to specify a different internal texture format from
the image format so that it can do the conversion instead of
Cogl. However under GLES the internal format and the image format must
always be the same and it only supports a limited set of formats. This
patch changes _cogl_texture_prepare_for_upload so that it does the
conversion using the cogl bitmap code when compiling for GLES.
http://bugzilla.openedhand.com/show_bug.cgi?id=2059
There was a check at the bottom of the loop which sets up the state
for each of the layers so that it would break from the loop when the
maximum number of layers is reached. However after doing this it would
not increment 'i'. 'i' is later used to disable the remaining layers
so it would end up disabling the last layer it just set up.
This patch moves the check to be part of the loop condition so that
the check is performed after incrementing 'i'.
http://bugzilla.openedhand.com/show_bug.cgi?id=2064
The warning displayed when too many layers are used had an off-by-one
error so that it would display even if exactly the maximum number is
used. There was also a missing space at the end of the line in the
message which looked wrong when displayed on the terminal.
http://bugzilla.openedhand.com/show_bug.cgi?id=2064
The ClutterCrossingEvent data structure contains the coordinates
of the crossing; they are regularly filed out by Clutter and by
the backend event processing code. And yet clutter_event_get_coords()
returns (0, 0) because it thinks that CLUTTER_ENTER and CLUTTER_LEAVE
events do not have coordinates.
Whenever we are warning inside ClutterActor we prefer the actor's name
to its type, if the name is set. The current code is made less readable
by the use of the ternary operator:
priv->name != NULL ? priv->name : G_OBJECT_TYPE_NAME (self)
This looks like a job for a simple convenience function.
cogl_path_arc_rel was never in any public headers so it isn't part of
the public API. It also has a slightly inconsistent name because the
rest of the relative path functions are called cogl_path_rel_*. This
patch makes it static for now to make it more obvious that it isn't
public. The name has changed to _cogl_path_rel_arc.
Timers and counters might not exist, so make every section of the
profile report depend on the object that it is querying.
This fixes the profile report generation that was broken by commit
8146d8d08d.
For internal use we should have a get_stage_internal() variant that
avoids type checks and calls to public functions. The implementation
is trivial enough, and it will avoid (scene graph depth + 1) type
checks and (scene graph depth) function calls.
If a path is copied and then appended to, the copy needs to have the
last sub path truncated so that it fits in the total path size in case
the original path was modified. However the path size check was broken
so if the copied path had more than one sub path it would fail.
Previously the clip stack code was trying to detect when the
orientation of the on-screen rectangle had changed by checking if the
order of the y-coordinates on the left edge was different from the
order the x-coordinates on the top edge. This doesn't work for some
rotations which was causing the clip planes to clip the wrong side of
the line. This patch makes it detect the orientation by calculating
the signed area which is a standard computer graphics algorithm.
http://bugzilla.openedhand.com/show_bug.cgi?id=2079
When drawing a path with only a single sub path, Cogl uses the
'even-odd' fill rule which means that if a part of the path intersects
with another part then the intersection would be inverted. However
when combining sub paths it treats them as separate paths and then
unions them together. This doesn't match the semantics of the even-odd
rule in SVG and Cairo. This patch makes it so that a new sub path is
just drawn as another triangle fan so that it will continue to invert
the stencil buffer. This is also much simpler and more efficient as
well as being more correct.
http://bugzilla.openedhand.com/show_bug.cgi?id=2088
In commit c0a553163b I changed the format used to read the picking
pixel to COGL_PIXEL_FORMAT_RGB_888 because it was convenient to avoid
the premult conversion. However this broke picking on GLES on some
platforms because for that glReadPixels is only guaranteed to support
GL_RGBA with GL_UNSIGNED_BYTE. Since the last commit cogl_read_pixels
will always use that format but it will end up with a conversion back
to RGB_888. This patch avoids that conversion and avoids the premult
conversion by reading in RGBA_8888_PRE.
http://bugzilla.openedhand.com/show_bug.cgi?id=2057
Under GLES glReadPixels is documented to only support GL_RGBA with
GL_UNSIGNED_BYTE and an implementation specfic format which can be
fetched with glGet, GL_IMPLEMENTATION_COLOR_READ_FORMAT_OES and
GL_IMPLEMENTATION_COLOR_READ_TYPE_OES. This patch makes it always read
using GL_RGBA and GL_UNSIGNED_BYTE and then convert the results if
neccessary.
This has some room for improvement because it doesn't attempt to use
the implementation specific format. Also the conversion is somewhat
wasteful because there are currently no cogl_bitmap_* functions to
convert without allocating a new buffer so it ends up doing an
intermediate copy.
http://bugzilla.openedhand.com/show_bug.cgi?id=2057
_cogl_bitmap_convert_format_and_premult was failing when converting
from RGBA to RGB and vice versa. _cogl_bitmap_fallback_convert
converts without altering the premult status so when choosing a new
format it would copy over the premult bit. However, it did this
regardless of whether the new format had an alpha channel so when
converting from RGBA_8888_PRE to RGB_888 it would end up inventing a
new meaningless format which would be RGB_888_PRE. This patch makes it
avoid copying the premult flag if the destination has no alpha. It
doesn't matter if it copies when the source format has no alpha
because it will always be unset.
_cogl_bitmap_convert_format_and_premult was also breaking when
converting from RGBA_8888_PRE to RGB_888 because it would think
RGB_888 is unpremultiplied and try to convert but then
_cogl_bitmap_fallback_premult wouldn't know how to do the conversion.
http://bugzilla.openedhand.com/show_bug.cgi?id=2057
In 125bded81 some comments were introduced to ClutterTexture
complaining that it can have a Cogl texture before being
realized. Clutter always assumes that the single GL context is current
so there is no need to wait until the actor is realized before setting
a texture. This patch replaces the comments with clarification that
this should not be a problem.
The patch also changes the documentation about the realized state in
various places to clarify that it is acceptable to create any Cogl
resources before the actor is realized.
http://bugzilla.openedhand.com/show_bug.cgi?id=2075
Instead of simply aborting we now print out a warning, when a spurious
GLX_BufferSwapComplete event is handled since it seems that people are
coming across the problem (perhaps due to a buggy driver) and making
apps crash in this situation is a bit extreme.
ClutterCairoTexture now stores the surface image data in a Cogl pixel
buffer object. When clutter_cairo_texture_create is called the buffer
is mapped and a new Cairo surface is created to render directly to the
PBO. When the surface is destroyed the buffer is unmapped and a Cogl
texture is recreated from the buffer. This should enable slightly
faster uploads when using Cairo because it avoids having to copy the
surface data to the texture.
http://bugzilla.openedhand.com/show_bug.cgi?id=1982
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Currently, each ClutterText caches 3 Pango layouts:
» one for the preferred, unbounded width
» one for the preferred height for a given width
» one for the allocated size
Some layout managers do a double pass that could flush the whole cache
before it has a chance of actually storing relevant data, resulting in
a continuous series of misses.
We can try to counteract this by doubling the size of the cache, from
three slots to six. More than six would be pointless, as well as too
memory consuming; but we might get down to a number between 3 and 6 at
any later point.
By comparing the requested size against the computed sized for existing
Pango layouts we can avoid creating layouts where the requested size
matches that of a previously computed one.
In particular this optimisation means that when working with a fixed
positioning based layout (with no constraints on the size of the
ClutterText) the same PangoLayout can be used to calculate the preferred
width, height and also the layout used for the actual painting.
http://bugzilla.openedhand.com/show_bug.cgi?id=2078
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This adds three new internal API functions which can be used to retain
the clip stack state and restore it later:
_cogl_get_clip_stack
_cogl_set_clip_stack
_cogl_clip_stack_copy
The functions are currently internal and not yet used but we may want
to make them public in future to replace the cogl_clip_stack_save()
and cogl_clip_stack_restore() APIs.
The get function just returns the handle to the clip stack at the top
of the stack of stacks and the set function just replaces it.
The copy function makes a cheap copy of an existing stack by taking a
reference to the top stack entry. This ends up working like a deep
copy because there is no way to modify entries of a stack but it
doesn't actually copy the data.
CoglClipStackState has now been renamed to CoglClipState and is moved
to a separate file. CoglClipStack now just maintains a stack and
doesn't worry about the rest of the state. CoglClipStack sill contains
the code to flush the stack to GL.
When glScissor is called it needs to pass coordinates in GL's
coordinate space where the origin is the bottom left. Previously this
conversion was done before storing the window rect in the clip
stack. However this might make it more difficult if we want to be able
to grab a handle to a clip stack and use it in different circumstances
later. This patch moves the coordinate conversion to inside the clip
state flushing code.
The stack is now stored as a list of reference counted entries.
Instead of using a GList, each entry now contains a link with a
reference to its parent. The idea is that this would allow copying
stacks with a shared ancestry.
Previously the code flushed the state by finding the bottom of the
stack and then applying each entry by walking back up to the top. This
is slightly harder to do now because the list is no longer
doubly-linked. However I don't think it matters which order the
entries are applied so I've just changed it to apply them in reverse
order.
There was also a restriction that if ever the stencil buffer is used
then we could no longer use clip planes for any subsequent entries. I
don't think this makes sense because it should always work as long as
it doesn't attempt to use the clip planes more than once. I've
therefore removed the restriction.
The Actor's long description is a bit cluttered; it contains a section
on the actor's box semantics, on the transformation order and on the
event handling.
We should use <refsect2> tags to divide the Actor's description into
logically separated sections.
We should also add a section about the custom Scriptable properties that
ClutterActor defines, and the special handling of unit-based properties.
The CoglAtlasTexture struct was not being freed in
_cogl_atlas_texture_free so there would be a small leak whenever a
texture was destroyed.
Thanks to Robert Bragg for spotting this.
CoglMaterial now sets GL_CLAMP_TO_EDGE if WRAP_MODE_AUTOMATIC is used
unless it is overridden when the material is flushed. The primitives
are still expected to expose repeat semantics so no user visible
changes are made. The idea is that drawing non-repeated textures is
the most common case so if we make clamp_to_ege the default then we
will reduce the number of times we have to override the
material. Avoiding overrides will become important if the overriding
mechanism is replaced with one where the primitive is expected to copy
the material and change that instead.
Previously, Cogl's texture coordinate system was effectively always
GL_REPEAT so that if an application specifies coordinates outside the
range 0→1 it would get repeated copies of the texture. It would
however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates
are in the range 0→1 so that in the common case that the whole texture
is being drawn with linear filtering it will not blend in edge pixels
from the opposite sides.
This patch adds the option for applications to change the wrap mode
per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge'
and 'automatic'. The automatic map mode is the default and it
implements the previous behaviour. The wrap mode can be changed for
the s and t coordinates independently. I've tried to make the
internals support setting the r coordinate but as we don't support 3D
textures yet I haven't exposed any public API for it.
The texture backends still have a set_wrap_mode virtual but this value
is intended to be transitory and it will be changed whenever the
material is flushed (although the backends are expected to cache it so
that it won't use too many GL calls). In my understanding this value
was always meant to be transitory and all primitives were meant to set
the value before drawing. However there were comments suggesting that
this is not the expected behaviour. In particular the vertex buffer
drawing code never set a wrap mode so it would end up with whatever
the texture was previously used for. These issues are now fixed
because the material will always set the wrap modes.
There is code to manually implement clamp-to-edge for textures that
can't be hardware repeated. However this doesn't fully work because it
relies on being able to draw the stretched parts using quads with the
same values for tx1 and tx2. The texture iteration code doesn't
support this so it breaks. This is a separate bug and it isn't
trivially solved.
When flushing a material there are now extra options to set wrap mode
overrides. The overrides are an array of values for each layer that
specifies an override for the s, t or r coordinates. The primitives
use this to implement the automatic wrap mode. cogl_polygon also uses
it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced
textures. Although this code has been added it looks like the sliced
trick has been broken for a while and I haven't attempted to fix it
here.
I've added a constant to represent the maximum number of layers that a
material supports so that I can size the overrides array. I've set it
to 32 because as far as I can tell we have that limit imposed anyway
because the other flush options use a guint32 to store a flag about
each layer. The overrides array ends up adding 32 bytes to each flush
options struct which may be a concern.
http://bugzilla.openedhand.com/show_bug.cgi?id=2063
GL supports setting different wrap modes for the s, t and r
coordinates so we should design the backend interface to support that
also. The r coordinate is not currently used by any of the backends
but we might as well have it to make life easier if we ever add
support for 3D textures.
http://bugzilla.openedhand.com/show_bug.cgi?id=2063
CoglColor and CoglMatrix have public declarations with private members
so that we are free to change the implementation but the structures
could still be allocated on the stack in applications. However it's
quite easy not to realise the members are private and then access them
directly. This patch wraps the members in a macro which redefines the
symbol name when including the header outside of the clutter source.
http://bugzilla.openedhand.com/show_bug.cgi?id=2065
The xx, yx, zx etc fields are meant to be read-only but they were
marked as private with the gtk-doc annotation. This patch moves the
private marker so that the 16 float member fields are public but the
type, inverted matrix, flags and padding are not.
When emitting signals, one can mark arguments as being "static", ie an
indication this argument will not change during the signal emission.
This allows the signal marshalling code to create static GValues, in
this case not to copy the Color.
http://bugzilla.openedhand.com/show_bug.cgi?id=2073
We decide whether the paint() should be a real paint or a paint in pick
mode depending on the global pick_mode value. Using G_UNLIKELY() on an
operation that most likely is going to be executed once every frame is
going to blow a lot of cache lines and frak with the CPU branch
prediction. Not good.
This adds three new API calls:
CoglHandle cogl_path_get()
void cogl_path_set(CoglHandle path)
CoglHandle cogl_path_copy(CoglHandle path)
All of the fields relating to the path have been moved from the Cogl
context to a new CoglPath handle type. The cogl context now just
contains a CoglPath handle. All of the existing path commands
manipulate the data in the current path handle. cogl_path_new now just
creates a new path handle and unrefs the old one.
The path handle can be stored for later with cogl_path_get. The path
can then be copied with cogl_path_copy. Internally it implements
copy-on-write semantics with an extra optimisation that it will only
copy the data if the new path is modified, but not if the original
path is modified. It can do this because the only way to modify a path
is by appending to it so the copied path is able to store its own path
length and only render the nodes up to that length. For this to work
the copied path also needs to keep its own copies of the path extents
because the parent path may change these by adding nodes.
The clip stack now uses the cogl_path_copy mechanism to store paths in
the stack instead of directly copying the data. This should save some
memory and processing time.
Although cogl_multiply_matrix was consistent with OpenGL, after further
consideration it was agreed that cogl_transform is a better name. Given
that it's in the global cogl_ namespace cogl_transform seems more self
documenting.
This adds an example of how to setup a Clutter style 2D coordinate space
and clarifies what state is owned by a framebuffer. (projection,
modelview, viewport and clip stack)
When we expose more cogl_framebuffer API this example will hopefully be
migrated into a more extensive introduction to using framebuffers.
Previously cogl_set_source and cogl_set_source_texture were in
cogl-material.c and the cogl_set_source_color* funcs were in
cogl-color.c. Originally this was because cogl.c was duplicated between
the GL and GLES backends and we didn't want to add to the amount of
duplicated code, but these files have since been consolidated into one
cogl.c.
Quite often it's desirable to be able to multiply the current modelview
matrix by an arbitrary matrix. Currently though you have to first
explicitly call cogl_get_modelview_matrix to get the current modelview
into a temporary variable, then you need to multiply it with your matrix
using cogl_matrix_multiply and finally use cogl_set_modelview_matrix to
make the result be the new modelview. This new convenience function lets
more efficiently skip the first get and last set steps.
Every now and then someone sees the cogl_enable API and gets confused,
thinking its public API so this renames the symbol to be clear that it's
is an internal only API.
ClutterX11TexturePixmap calls get_allocation_box() when queueing a
clipped redraw. If the allocation is not valid, and if we queue a
lot of redraws in response to a series of damage events, the net
result is that we spend all our time in a re-layout. We can
short-circuit this by checking if the actor has a valid allocation, and
if not, just queue a redraw - the actor will be allocated by the time it
is going to be painted.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Add clutter_actor_has_allocation(), a method meant to be used when
deciding whether to call clutter_actor_get_allocation_box() or any
of its wrappers.
The get_allocation_box() method will, in case the allocation is invalid,
perform a costly re-allocation cycle to ensure that the returned box
is valid. The has_allocation() method is meant to be used if we have an
actor calling get_allocation_box() from outside the place where the
allocation is always guaranteed to be valid.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Added new "homogeneous" mode to ClutterBoxLayout, that makes layout children
get all the same size.
This is heavily inspired in the "homogeneous" attribute available in GtkBox,
but simplified as we don't have padding nor borders in box layout, only
spacing.
Also added to test-box-layout a key to set/unset homogeneous mode.
* Coding style fixes.
* Added proper test for homogeneous mode in box layout.
* Fix in homogeneous mode.
http://bugzilla.openedhand.com/show_bug.cgi?id=2034
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Somebody somewhere decided it would be ok to define 'y1' as a global
function in math.h thus condemning us to repeatedly making commits to
fix these obnoxious compiler warnings about aliasing.
glXSwapIntervalSGI only affects buffer swaps to the
current GLX drawable.
That means that calling it once in clutter_backend_glx_get_features
isn't sufficent, so set it up in clutter_backend_glx_ensure_context to
make sure it affects buffer swaps for the current drawable.
http://bugzilla.openedhand.com/show_bug.cgi?id=2044
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Move the size check after the NULL check, add the clip height into the
check logic and fix up the comment.
http://bugzilla.openedhand.com/show_bug.cgi?id=2040
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When printing out the property value during a ClutterScript debug run we
generate the value's content using g_strdup_value_contents() - though we
do it unconditionally. The contents might not be printed (they most
likely won't, actually) and will be freed afterwards. This is
unnecessary: we can allocate the contents string after checking if we're
going to print out the debug note, thus avoiding the whole
allocation/free cycle unless strictly needed.
When setting up the state for a layer, we need to switch texture
units before we do anything that might bind the texture, or
we'll bind the wrong texture to the previous unit.
http://bugzilla.openedhand.com/show_bug.cgi?id=2033
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
* Add new clutter_geometry_union(), because writing union intersection
is harder than it looks. Fixes two problems with the inline code in
clutter_stage_glx_add_redraw_clip().
1) The ->x and ->y of were reassigned to before using them to
compute the new width and height.
2) since ClutterGeometry has unsigned width, x + width is unsigned,
and comparison goes wrong if either rectangle has a negative
x + width. (We fixed width for GdkRectangle to be signed for GTK+-2.0,
this is a potent source of bugs.)
* Use in clutter_stage_glx_add_redraw_clip()
* Account for the case where the incoming rectangle is empty, and don't
end up with the stage being entirely redrawn.
* Account for the case where the stage already has a degenerate
width and don't end up with redrawing only the new rectangle and not
the rest of the stage.
The better fix here for the second two problems is to stop using a 0
width to mean the entire stage, but this should work for now.
http://bugzilla.openedhand.com/show_bug.cgi?id=2040
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
We need to set up the rowstride and alignment properly in
CoglTexture2D before reading texture data.
http://bugzilla.openedhand.com/show_bug.cgi?id=2036
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If you forgot to call clutter_init() then you currently end up with a
warning saying that the stage cannot be initialized because the backend
does not support multiple stages. Clearly not useful.
We can catch some of the missing initialization in the features API,
since we will likely end up asking for a feature at some point.
We kind of assume that stuff will break well before during the
ClutterBackend::create_context() implementation if we fail to create a
GL context. We do, however, have error reporting in place inside the
Backend API to catch those cases. Unfortunately, since we switched to
lazy initialization of the Stage, there can be a case of GL context
creation failure that still leads to a successful initialization - and a
segmentation fault later on. This is clearly Not Good™.
Let's try to catch a failure in all the places calling create_context()
and report back to the user the error in a meaningful way, before
crashing and burning.
If you call get_n_columns() during the instance initialization phase but
before set_name()/set_types() have been called, you'll get a (guint) -1.
This is less than ideal.
If columns haven't been initialized we should just return 0, which was
the intent of the API since the beginning.
Based on a patch by: Bastian Winkler <buz@netbuz.org>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The int storage, and the initial value of -1, is used as a guard when
subclassing ClutterListModel to allow the sub-class to call
clutter_model_set_names() and clutter_model_set_types().
This reverts commit c274118a8f.
This makes it more likely consumers notice invalid unreferences.
GObject has the same assertion.
http://bugzilla.openedhand.com/show_bug.cgi?id=2029
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
clutter_model_get_n_columns is supposed to return a guint, so the
n_columns field needs to be a guint with the initial value set to 0.
http://bugzilla.openedhand.com/show_bug.cgi?id=2017
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When entering cogl_texture_2d_new_from_bitmap the internal format can
be COGL_PIXEL_FORMAT_ANY. This was causing _cogl_texture_2d_can_create
to use an invalid GL format type. Mesa apparently ignores this but it
was causing errors when Cogl is compiled with debugging under NVidia.
http://bugzilla.openedhand.com/show_bug.cgi?id=2026
Add a return result from CoglTexture.transform_quad_coords_to_gl(),
so that we can properly determine the nature of repeats in
the face of GL_TEXTURE_RECTANGLE_ARB, where the returned
coordinates are not normalized.
The comment "We also work out whether any of the texture
coordinates are outside the range [0.0,1.0]. We need to do
this after calling transform_coords_to_gl in case the texture
backend is munging the coordinates (such as in the sub texture
backend)." is disregarded and removed, since it's actually
the virtual coordinates that determine whether we repeat,
not the GL coordinates.
Warnings about disregarded layers are used in all cases where
applicable, including for subtextures.
http://bugzilla.openedhand.com/show_bug.cgi?id=2016
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Fix clutter initialisation if argb visuals are enabled, setting a border
color on creating the dummy window. This should avoid BadMatch happening
when the depth of the root window visual is not the same of the depth
of the argb visual.
http://bugzilla.openedhand.com/show_bug.cgi?id=2011
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Backport of the upstream JSON-GLib commit that improved the strictness
of JsonParser.
The original upstream commit is:
29881f03468db08bfb404cfcd5b61b4cdc419a87
In _cogl_texture_2d_sliced_foreach_sub_texture_in_region(), don't
assert that the target is GL_TEXTURE_2D; instead conditionalize
normalization on the target.
http://bugzilla.openedhand.com/show_bug.cgi?id=2015
If the EGL context is already created then we shouldn't try to create
another one. This was causing problems where one context would be
created from calling _clutter_feature_init and the other was created
from _clutter_backend_get_features. Cogl would set up its state using
the first context and then assume the state was still valid when the
second context became used so blending was not working correctly.
http://bugzilla.openedhand.com/show_bug.cgi?id=2020
The documentation and name of the get_transformation_matrix function
implies that 'matrix' is purely an out parameter. However it wasn't
initializing the matrix before calling the 'apply_transform' virtual
so it was basically just a wrapper for the virtual. The virtual
assumes the matrix parameter is in/out and applies the actor's
transformation on top of any existing transformations. This causes
unexpected semantics that are inconsistent with the documentation.
This changes clutter_glx_texture_pixmap_update_area so it defers the
call to glXBindTexImageEXT until our pre "paint" signal handler which
makes clutter_glx_texture_pixmap_update_area cheap to call.
The hope is that mutter can switch to reporting raw damage updates to
ClutterGLXTexturePixmap and we can use these to queue clipped redraws.
A new (internal only currently) API, _clutter_actor_queue_clipped_redraw
can be used to queue a redraw along with a clip rectangle in actor
coordinates. This clip rectangle propagates up to the stage and clutter
backend which may optionally use the information to optimize stage
redraws. The GLX backend in particular may scissor the next redraw to
the clip rectangle and use GLX_MESA_copy_sub_buffer to present the stage
subregion.
The intention is that any actors that can naturally determine the bounds
of updates should queue clipped redraws to reduce the cost of updating
small regions of the screen.
Notes:
» If GLX_MESA_copy_sub_buffer isn't available then the GLX backend
ignores any clip rectangles.
» queuing multiple clipped redraws will result in the bounding box of
each clip rectangle being used.
» If a clipped redraw has a height > 300 pixels then it's promoted into
a full stage redraw, so that the GPU doesn't end up blocking too long
waiting for the vsync to reach the optimal position to avoid tearing.
» Note: no empirical data was used to come up with this threshold so
we may need to tune this.
» Currently only ClutterX11TexturePixmap makes use of this new API. This
is done via a new "queue-damage-redraw" signal that is emitted when
the pixmap is updated. The default handler queues a clipped redraw
with the assumption that the pixmap is being painted as a rectangle
covering the actors transformed allocation. If you subclass
ClutterX11TexturePixmap and change how it's painted you now also
need to override the signal handler and queue your own redraw.
Technically this is a semantic break, but it's assumed that no one
is currently doing this.
This still leaves a few unsolved issues with regards to optimizing sub
stage redraws that need to be addressed in further work so this can only
be considered a stepping stone a this point:
» Because we have no reliable way to determine if the painting of any
given actor is being modified any optimizations implemented using
_clutter_actor_queue_redraw_with_clip must be overridable by a
subclass, and technically must be opt-in for existing classes to avoid
a change in semantics. E.g. consider that a user connects to the paint
signal for ClutterTexture and paints a circle instead of a rectangle.
In this case any original logic to queue clipped redraws would be
incorrect.
» Currently only the implementation of an actor has enough information
with which to queue clipped redraws. E.g. It is not possible for
generic code in clutter-actor.c to queue a clipped redraw when hiding
an actor because actors have no way to report a "paint box". (remember
actors can draw outside their allocation and actors with depth may
also be projected outside of their allocation)
» The current plan is to add a actor_class->get_paint_cuboid()
virtual so actors can report a bounding cube for everything they
would draw in their current state and use that to queue clipped
redraws against the stage by projecting the paint cube into stage
coordinates.
» Our heuristics for promoting clipped redraws into full redraws to
avoid blocking the GPU while we wait for the vsync need improving:
» vsync issues aren't relevant for redirected/composited applications
so they should use different heuristics. In this case we instead
need to trade off the cost of blitting when using glXCopySubBuffer
vs promoting to a full redraw and flipping instead.
commit 511e5ceb51 accidentally removed the #ifdef COGL_ENABLE_DEBUG
guards around the "cogl-debug" and "cogl-no-debug" cogl_args[] which
this patch restores.
The FlowLayout fails to provide a preferred size in case no sizing is
specified on one axis. It should, instead, have the preferred size of
the sum of its children, depending on the orientation property.
http://bugzilla.openedhand.com/show_bug.cgi?id=2013
Some EGL drivers for embedded devices require a specific framebuffer
device to be opened and passed to eglCreateWindowSurface(). Since it's
optional, we can provide an environment variabled called
CLUTTER_FB_DEVICE that can be used to specify the path of the device
to be opened.
http://bugzilla.openedhand.com/show_bug.cgi?id=1997
Update the EGL native framebuffer backend to be 1.2-ready:
» create the EGL context and the surface inside the create_context()
implementation so that a context is always available
» simplify the StageWindow implementation
» clean up old code
http://bugzilla.openedhand.com/show_bug.cgi?id=1997
Just like _cogl_texture_2d_new_with_size(),
_cogl_texture_2d_new_from_bitmap() needs to check if an unsliced
texture can be created at the given size, or if hardware
limitations prevent this.
http://bugzilla.openedhand.com/show_bug.cgi?id=2014
Signed-off-by: Neil Roberts <neil@linux.intel.com>
cogl_read_pixels() no longer asserts that the format passed in is
RGBA_8888 but instead accepts any format. The appropriate GL enums for
the format are passed to glReadPixels so OpenGL should be perform a
conversion if neccessary.
It currently assumes glReadPixels will always give us premultiplied
data. This will usually be correct because the result of the default
blending operations for Cogl ends up with premultiplied data in the
framebuffer. However it is possible for the framebuffer to be in
whatever format depending on what CoglMaterial is used to render to
it. Eventually we may want to add a way for an application to inform
Cogl that the framebuffer is not premultiplied in case it is being
used for some special purpose.
If the requested format is not premultiplied then Cogl will convert
it. The tests have been changed to read the data as premultiplied so
that they won't be affected by the conversion. Picking in Clutter has
been changed to use COGL_PIXEL_FORMAT_RGB_888 because it doesn't need
the alpha component. clutter_stage_read_pixels is left unchanged
because the application can't specify a format for that so it seems to
make most sense to store unpremultiplied values.
http://bugzilla.openedhand.com/show_bug.cgi?id=1959
* stage-min-size-rework:
docs: Update minimum size accessors
actor: Use the TOPLEVEL flag instead of a type check
[stage] Use min-width/height props for min size
The clutter-profile.c print_report() code would crash if no stats had
been gathered because uprof would return NULL for the "Redrawing" timer
which we then dereferenced.
This changes the code to start by checking for the "Mainloop",
"Redrawing" and "Do Pick" timers and if none are present it returns
immediately without generating any report.
Since using addresses that might change is something that finally
the FSF acknowledge as a plausible scenario (after changing address
twice), the license blurb in the source files should use the URI
for getting the license in case the library did not come with it.
Not that URIs cannot possibly change, but at least it's easier to
set up a redirection at the same place.
As a side note: this commit closes the oldes bug in Clutter's bug
report tool.
http://bugzilla.openedhand.com/show_bug.cgi?id=521
There is no need for us to check for low-level functions and header
files, especially since we haven't been checking the results until
now. This makes cross-compiling slightly more bearable.
If the actor is an internal child of another actor then we should call
unparent() when destroying it, like clutter_actor_reparent() does;
otherwise we'll leak the actor, since the parent holds a reference to
it.
http://bugzilla.openedhand.com/show_bug.cgi?id=2009
Instead of shadowing these properties with different properties with the
same names on stage, actually use them. Behaviour should be identical,
except the minimum stage size can now be enforced by setting the
min-width/height properties as well as using the set_minimum_size
function.
If we do not unset the Stage we will have stale data, and the Crossing
event when re-entering a Stage will not be emitted, as the actor under
the pointer might be the same as before.
This adds a COGL_INDICES_TYPE_UNSIGNED_INT enum value so that unsigned
ints can be used with cogl_vertex_buffer_indices_new. Unsigned ints
are not supported in core on GLES so a feature flag has also been
added to advertise this. GLES only sets the feature if the
GL_OES_element_index_uint extension is available. It is an error to
call indices_new() with unsigned ints unless the feature is
advertised.
http://bugzilla.openedhand.com/show_bug.cgi?id=1998
Allow a ClutterModel to be constructed through the ClutterScript API.
Currently this allows a model to be generated like like this:
{
"id" : "test-model",
"type" : "ClutterListModel",
"columns" : [
[ "text-column", "gchararray" ],
[ "int-column", "gint" ],
[ "actor-column", "ClutterRectangle" ]
]
}
where 'columns' is an array containing arrays of column-name,
column-type pairs.
http://bugzilla.openedhand.com/show_bug.cgi?id=2007
The code has gotten really complicated to follow.
As soon as we have a sync-to-vblank mechanism we should just bail out.
Also, __GL_SYNC_TO_VBLANK (which is used by nVidia) should be assumed
equivalent to a CLUTTER_VBLANK_GLX_SWAP.
We should explain what a "key frame" is for ClutterAnimator, possibly
with some sort of visual cue.
This allows me to demonstrate my poor skills at using Inkscape, as well
as my overall bad taste for graphics design.
The top-level types list was comically out of date, and it was only
determining whether the type we were constructing was initially unowned
or a full object. We can safely replace it with a simple type check.
It would be useful to be able to share the Timeline across different
animator instances, or with different animation constructs. Also this
allows sharing definitions of Timelines in ClutterScript.
The arguments for remove_key() can be NULL, but there is an extraneous
assertion that fails if they are. The pre-conditions should match the
documentation, in this case.
A sub-class of ClutterBox might add ChildMeta support, and since
pack_at() does not go through clutter_container_add_actor(), we
need to manually call the create_child_meta() ourselves.
It is conceivable that Container implementations might add children
outside of the Container::add() implementation - e.g. for packing at
a specific index. Since the addition (and removal) might happen outside
the common path we need to expose all the API that is implicitly called
by ClutterContainer when adding and removing a child - namely the
ChildMeta creation and destruction.
Previously the GLES2 backend needed a special wrapper for
glBindTexture because it needed to know the internal GL format of the
texture in order to correctly implement the GL_MODULATE texture env
mode. When GL_MODULATE is used then the RGB values are taken from the
previous texture layer rather than being fetched from the
texture. However since the material API was added Cogl no longer uses
the GL_MODULATE texture env mode but instead always uses GL_COMBINE.
Compiling the GLES2 backend broke since the more-texture-backends
branch merge because the cogl_get_internal_gl_format function was
removed and there was one place in GLES2 specific code that was using
this to bind the texture.
The texture layer combine functions are now hard coded to GL_COMBINE
instead of GL_MODULATE. The combine function can be customized with
all the parameters of GL_COMBINE. A shader is generated to implement
the given parameters.
Currently it will try to generate code for the constant color but it
will use a uniform which does not exist.
The GLES2 backend for Cogl is failing to compile because
GL_MAX_TEXTURE_UNITS is not defined. Let's define it and provide a
wrapper which uses GL_MAX_TEXTURE_IMAGE_UNITS or
COGL_GLES2_MAX_TEXTURE_UNITS, whichever is the smallest.
