Some drivers expose EGL_EXT_image_dma_buf_import_modifiers so you can
query supported formats, but don't support any modifiers. Handle this by
treating it like DRM_FORMAT_MOD_INVALID.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/782
Clutter stage used to compute the initial projection using a fixed z
translation which wasn't matching the one we computed in
calculate_z_translation().
This caused to have a wrong initial projection on startup which was then
correctly recomputed only at the first paint.
However, since this calculation doesn't depend on view, but only on viewport
size, perspective's fovy and z_near we can safely do this at startup and
only when any of those parameters change.
Then we can move the computation out _clutter_stage_maybe_setup_viewport()
since the cogl framebuffer viewport sizes aren't affecting this.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1639https://gitlab.gnome.org/GNOME/mutter/merge_requests/803
GCC's manpage says that this flag does the following:
Do not store floating-point variables in registers, and inhibit other
options that might change whether a floating-point value is taken from
a register or memory.
This option prevents undesirable excess precision on machines such as
the 68000 where the floating registers (of the 68881) keep more
precision than a "double" is supposed to have. Similarly for the x86
architecture. For most programs, the excess precision does only good,
but a few programs rely on the precise definition of IEEE floating
point.
We rely on this behaviour in our fork of clutter. When performing
floating point computations on x86, we are getting the wrong results
because of this architecture's use of the CPU's extended (x87, non-IEEE
confirming) precision by default. If we enable `-ffloat-store` here,
then we'll get the same results everywhere by storing into variables
instead of registers. This does not remove the need to be correct when
handling floats, but it does mean we don't need to be more correct than
the IEEE spec requires.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/785
Instead of open coding the X11 focus management in display.c, expose
it as a single function with similar arguments to its MetaDisplay
counterpart. This just means less X11 specifics in display.c.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/751
MetaDisplay and MetaX11Display focus windows are slightly decoupled,
we cannot rely here on the MetaDisplay focus to be updated yet. We
however know the X Window that got focused, so lookup the corresponding
MetaWindow (and client X window) from it.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/751
We have a "setup" phase, used internally to initialize early the x11
side of things like the stack tracker, and an "opened" phase where
other upper parts may hook up to. This latter phase is delayed during
initialization so the upper parts have a change to connect to on
plugin creation.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/771
When starting standalone mutter and running using the native backend, we
always fall back on using the us pc105 keyboard layout. This can be very
frustrating if one is used to using some other keyboard layout, such as
dvorak, causing keyboard fumbling everytime when doing something with
standalone mutter.
Avoid this involuntary fumbling by having the default plugin query
localed what layout the user has actually configured the machine to
operate using. It doesn't add any keymap selection user interface, so
it'll always use the first one it encounters.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/787
The commit f2f4af0d50 missed one situation
where mutter does things differently, i.e. changes what surface actor is
associated with a given window actor: reparenting a Xwayland window when
changing whether it is decorated.
To summarize, there are three types of window actors:
X11 window actors - directly tied to the backing X11 window. The
corresponding surface actor is directly owned by the window actor and
will never change.
Wayland window actors - gets its surface actor from MetaWaylandSurface
at construction. A single MetaWaylandSurface may create and destroy
multiple window actors over time, but a single window actor will never
change surface actor.
Xwayland window actors - a mix between the above two types; the window
corresponds to the X11 window, and so does the window actor, but the
surface itself comes from the MetaWaylandSurface.
Normally when a X11 window is unmapped, the corresponding MetaWindow is
unmanaged. With Xwayland, this happens indirectly via the destruction of
the wl_surface. The exception to this is windows that are reparented
during changing their decoration state - in this case on plain X11, the
MetaWindow stays alive. With Xwayland however, there is a race
condition; since the MetaWindow is tied to the wl_surface, if we receive
the new surface ID atom before the destruction of the old wl_surface,
we'll try to associate the existing MetaWindow and MetaWindowActor with
the new wl_surface, hitting the assert. If the surface destruction
arrives first, the MetaWindow and MetaWindowActor will be disposed, and
the we wouldn't hit the assert.
To handle this race gracefully, reinstate handling of replacing the
surface actor of an existing window actor, to handle this race, as it
was handled before.
Eventually, it should be reconsidered whether the MetaWindow lifetime is
tied to the wl_surface or if it should be changed to be consistent with
plain X11, as this re-exposes another bug where the X11 client and
mutter will enter a feedback loop where the window is repeatedly
remapped. See https://gitlab.freedesktop.org/xorg/xserver/issues/740.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/709https://gitlab.gnome.org/GNOME/mutter/merge_requests/773
When using xdg-output v3 or later, the Wayland compositor does not send
xdg_output.done events which are deprecated.
Instead, it should send a wl_output.done event for the matching
wl_output.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/771
When suspending, the devices are removed and the virtual device
associated with the corresponding core pointer is disposed.
Add the pointer accessibility virtual device to the core pointer
on resume to restore pointer accessibility on resume if enabled.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/761
When starting a DnD operation, mutter would remove keyboard focus from
the client, only to restore it on the data offer destroy.
However, if the DnD fail, the keyboard focus is not restored, leaving
the user unable to type in the focused window, even after clicking in
the window.
That issue would show only on first attempt, as further DnD attempts
would destroy the previous data offer which would also restore the
keyboard focus.
Make sure we restore the keyboard focus on drag end as well.
https://gitlab.gnome.org/GNOME/mutter/issues/747
On drag start, `data_device_start_drag()` issues a keyboard grab, which
in turn will unset the current input focus.
There is not need to unset the input focus in `data_device_start_drag()`
as this is redone in `meta_wayland_keyboard_start_grab()`
https://gitlab.gnome.org/GNOME/mutter/issues/747
Currently, Clutter does picking by drawing with Cogl and reading
the pixel that's beneath the given point. Since Cogl has a journal
that records drawing operations, and has optimizations to read a
single pixel from a list of rectangle, it would be expected that
we would hit this fast path and not flush the journal while picking.
However, that's not the case: dithering, clipping with scissors, etc,
can all flush the journal, issuing commands to the GPU and making
picking slow. On NVidia-based systems, this glReadPixels() call is
extremely costly.
Introduce geometric picking, and avoid using the Cogl journal entirely.
Do this by introducing a stack of actors in ClutterStage. This stack
is cached, but for now, don't use the cache as much as possible.
The picking routines are still tied to painting.
When projecting the actor vertexes, do it manually and take the modelview
matrix of the framebuffer into account as well.
CPU usage on an Intel i7-7700, tested with two different GPUs/drivers:
| | Intel | Nvidia |
| ------: | --------: | -----: |
| Moving the mouse: |
| Before | 10% | 10% |
| After | 6% | 6% |
| Moving a window: |
| Before | 23% | 81% |
| After | 19% | 40% |
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/154,
https://gitlab.gnome.org/GNOME/mutter/issues/691
Helps significantly with: https://gitlab.gnome.org/GNOME/mutter/issues/283,
https://gitlab.gnome.org/GNOME/mutter/issues/590,
https://gitlab.gnome.org/GNOME/mutter/issues/700
v2: Fix code style issues
Simplify quadrilateral checks
Remove the 0.5f hack
Differentiate axis-aligned rectangles
https://gitlab.gnome.org/GNOME/mutter/merge_requests/189
Add a function to check whether a point is inside a quadrilateral
by checking the cross product of vectors with the quadrilateral
points, and the point being checked.
If the passed quadrilateral is zero-sized, no point is ever reported
to be inside it.
This will be used by the next commit when comparing the transformed
actor vertices.
[feaneron: add a commit message and remove unecessary code]
https://gitlab.gnome.org/GNOME/mutter/merge_requests/189
