When running as a wayland compositor, we can't use the xserver's
IDLETIME, because that's updated only in response to X events.
But we have all the events ourselves, so we can just run the timer
in process.
https://bugzilla.gnome.org/show_bug.cgi?id=706005
We can't use the X11 stage window, if clutter is not using the X11
backend (and even if it was, it would be bogus when the xwayland
server is not the one clutter is talking to). Instead, we introduce
the concept of "focus type", which we use to differentiate the
various meanings of None in the focus_xwindow field.
https://bugzilla.gnome.org/show_bug.cgi?id=706364
Remove grab window and cursor from the API, and just grab always
on the stage window with no cursor.
This is mainly to remove the X11 usage in the public API, in preparation
for implementing this in wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=705917
Using out-of-band notifications from the wayland protocol or from
X is racy, in that the client could ask for the new resources before
we have them.
Instead, with a signal, we are sure that when the client asks for
it, it will get the right values.
https://bugzilla.gnome.org/show_bug.cgi?id=706382
Under X, we need to use XFixes to watch the cursor changing, while
on wayland, we're in charge of setting and painting the cursor.
MetaCursorTracker provides the abstraction layer for gnome-shell,
which can thus drop ShellXFixesCursor. In the future, it may grow
the ability to watch for pointer position too, especially if
CursorEvents are added to the next version of XInput2, and thus
it would also replace the PointerWatcher we use for gnome-shell's
magnifier.
https://bugzilla.gnome.org/show_bug.cgi?id=705911
The value passed to XRRCrtcSetGamma must be allocated with
XRRAllocGamma (because it relies on the locations of green and blue),
otherwise garbage is sent on the wire.
https://bugzilla.gnome.org/show_bug.cgi?id=706231
We were relying on the XRandR events from the X server to update
the configuration, but we were calling meta_monitor_config_update_current()
immediately after, so the MonitorConfig would be updated with the
old configuration (and we would save that to disk!)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
First disable CRTCs that should be off in the new configuration,
then resize the framebuffer, then enable the new CRTCs.
If we don't do that, and we're making the screen smaller, X complains
with a BadMatch.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add "edid-file", if we have one (in the KMS case, where we can point
people to the right sysfs file), or "edid" with inline data.
These are needed by colord to build the default ICC profile for
uncalibrated displays.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Instead of keeping a forest of if backend else ..., use a subclass
and virtual functions to discriminate between XRandR and the
dummy backend (which lives in the parent class togheter with the
common code)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
We want to show a dialog when a display change happens from the
control center. To do so, add a new vfunc to MetaPlugin and
call it when a configuration change is requested via DBus.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add GetCrtcGamma() and SetCrtcGamma(), that wrap the similarly
named XRandR API. These are used by GnomeRR inside the color
plugin of the control center (and may go away if the color
plugin decides to do something different under wayland)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
GnomeRR needs that too.
The backlight is exported as a normalized 0-100 value, or -1 if not
supported. Clamping to HW limits is handled by the backend.
Changing backlight uses a different method call, to avoid recomputing
the full display configuration every time the user presses the
backlight keys.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
The default configuration is extended, which is only possible
if there are as many CRTCs as outputs, so make sure that's true.
Also, add more and bigger modes, so that different sizes will
be chosen for the three outputs.
A nice side effect of this is that with a real 1920x1080 + 1600x900
layout, if you disable the VGA you get a stage that matches the
screen size, which triggers the legacy fullscreen path in the
outside mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Use a private output property to store if the output is in
presentation mode or not, so that this information is not lost
after the configuration read back from the server.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Ripped off libgnome-desktop, trimming the parts that checked
that the configuration was plausible, as that should be done
in gnome-control-center before asking mutter for a change.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add a new object, MetaMonitorConfig, that takes care of converting
between the logical configurations stored in monitors.xml and
the HW resources exposed by MonitorManager.
This commit includes loading and saving of configurations, but
still missing is the actual CRTC assignments and a default
configuration when none is found in the file.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Read the current transform from XRandR, and expose the transforms
that are really supported on the bus.
The dummy backend now advertises all transforms, since it doesn't
actually apply them.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Instead of a full white background, make one with a random color.
This way the different "monitors" are visible and it's easier
to debug the DBus API.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add a number of dummy outputs and modes to the dummy backend,
and implement the writing bits.
The only visible effect is that you can change the screen size,
which resizes the output window.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Now MonitorManager does its own handling of XRandR events, which
means we no longer handle ConfigureNotify on the root window.
MetaScreen reacts to MonitorManager::monitor-changed and updates
its internal state, including the new size.
This paves the way for doing display configuration using only
the dummy backend, which would allow testing wl_output interfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Implement ApplyConfiguration in terms of XRandR calls.
Error checking is done before actually committing the configuration.
If mutter is using one of the other monitor config backends, an
error is reported and nothing happens.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Turns out that even if two outputs say that they can be controlled
by a given CRTC, you can't configure them in the same CRTC unless
they are marked as "possible clones" one of the other.
This can further restrict the configuration options, so we need
to expose this limitation in the DBus API.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
This new interface will be used by the control center and possibly
the settings daemon to configure the screens. It is designed to
resemble a simplified XRandR, while still exposing all the quirks
of the hardware, so that the panel can limit the user choices
appropriately.
To do so, MetaMonitorMode needs to track CRTCs, outputs and modes,
so the low level objects have been decoupled from the high-level
MetaMonitorInfo, which is used by core and API and offers a simplified
view of HW, that hides away the details of what is cloned and how.
This is still not efficient as it should be, because on every
HW change we drop all data structures and rebuild them from scratch
(which is not expensive because there aren't many of them, but
at least in the XRandR path it involves a few sync X calls)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Consolidate all places that deal with output configuration in
MetaScreen, which gets it either from XRandR or from a dummy static configuration.
We still need to read the Xinerama config, even when running xwayland,
because we need the indices for _NET_WM_FULLSCREEN_MONITORS, but
now we do it only when needed.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
We need to use g_signal_connect_object(), rather than g_signal_connect(),
because the window actor can be destroyed before the window emits
the final notify::appears-focused inside unmanage, if the plugin
decides that it doesn't want to animate the destruction (which
happens with dialogs and the default plugin)
https://bugzilla.gnome.org/show_bug.cgi?id=706207
We need to use g_signal_connect_object(), rather than g_signal_connect(),
because the window actor can be destroyed before the window emits
the final notify::appears-focused inside unmanage, if the plugin
decides that it doesn't want to animate the destruction (which
happens with dialogs and the default plugin)
https://bugzilla.gnome.org/show_bug.cgi?id=706207
It is a very bad idea in a glib program (especially one heavily
using glib child watching facilities, like gnome-shell) to handle
SIGCHLD. While we're there, let's also use g_spawn_async, which
solves some malloc-after-fork problems and makes the code generally
cleaner.
https://bugzilla.gnome.org/show_bug.cgi?id=705816
The current surface refers to the surface right below the pointer
(according to the pick performed by clutter), while the focus surface
is the one receiving events. They can be out of sync in case of
grabs, in which case we should keep trying to focus the current
surface.
https://bugzilla.gnome.org/show_bug.cgi?id=706077
The previous code was leaving focus fields dirty in MetaWaylandPointer
and MetaWaylandKeyboard at time (which could crash the X server
because of invalid object IDs)
The new code is more tighly integrated in the normal X11 code
for handling keyboard focus (meaning that the core idea of input
focus is also correct now), so that meta_window_unmanage() can
do the right thing. As a side benefit, clicking on wayland clients
now unfocus X11 clients.
For the mouse focus, we need to clear the surface pointer when
the metawindowactor is destroyed (even if the actual actor is
kept alive for effects), so that a repick finds a different pointer
focus.
https://bugzilla.gnome.org/show_bug.cgi?id=705859
Remove window_surfaces, as the FIXME asks for. We don't need it
because we can obtain the surface from the MetaWindow, and
follow the wayland compositor path for both types of clients.
https://bugzilla.gnome.org/show_bug.cgi?id=705818
When running Mutter under Cogl's KMS backend no cursor will be
provided so instead this makes it so the cursor will be painted as a
CoglTexture that gets moved in response to mouse motion events. The
painting is done in a subclass of ClutterStage so that we can
guarantee that the cursor will be painted on top of everything else.
This patch adds support for the set_cursor method on the pointer
interface so that clients can change the cursor image.
The set_pointer method sets a surface and a hotspot position to use
for the cursor image. The surface's buffer is converted to a
CoglTexture and attached to a pipeline to paint directly via Cogl. If
a new buffer is attached to the surface the image will be updated. The
cursor reverts back to the default image whenever to the pointer focus
is moved off of any surface.
The image for the pointer is taken from X. It gets installed into
a fixed data location for mutter.
This copies the basic input support from the Clayland demo compositor.
It adds a basic wl_seat implementation which can convert Clutter mouse
events to Wayland events. For this to work all of the wayland surface
actors need to be made reactive.
The wayland keyboard input focus surface is updated whenever Mutter
sees a FocusIn event so that it will stay in synch with whatever
surface Mutter wants as the focus. Wayland surfaces don't get this
event so for now it will just give them focus whenever they are
clicked as a hack to test the code.
Authored-by: Neil Roberts <neil@linux.intel.com>
Authored-by: Giovanni Campagna <gcampagna@src.gnome.org>
This breaks down the assumptions in stack-tracker.c and stack.c that
Mutter is only stacking X windows.
The stack tracker now tracks windows using a MetaStackWindow structure
which is a union with a type member so that X windows can be
distinguished from Wayland windows.
Some notable changes are:
Queued stack tracker operations that affect Wayland windows will not be
associated with an X serial number.
If an operation only affects a Wayland window and there are no queued
stack tracker operations ("unvalidated predictions") then the operation
is applied immediately since there is no server involved with changing
the stacking for Wayland windows.
The stack tracker can no longer respond to X events by turning them into
stack operations and discarding the predicted operations made prior to
that event because operations based on X events don't know anything
about the stacking of Wayland windows.
Instead of discarding old predictions the new approach is to trust the
predictions but whenever we receive an event from the server that
affects stacking we cross-reference with the predicted stack and check
for consistency. So e.g. if we have an event that says ADD window A then
we apply the predictions (up to the serial for that event) and verify
the predicted state includes a window A. Similarly if an event says
RAISE_ABOVE(B, C) we can apply the predictions (up to the serial for
that event) and verify that window B is above C.
If we ever receive spurious stacking events (with a serial older than we
would expect) or find an inconsistency (some things aren't possible to
predict from the compositor) then we hit a re-synchronization code-path
that will query the X server for the full stacking order and then use
that stack to walk through our combined stack and force the X windows to
match the just queried stack but avoiding disrupting the relative
stacking of Wayland windows. This will be relatively expensive but
shouldn't be hit for compositor initiated restacking operations where
our predictions should be accurate.
The code in core/stack.c that deals with synchronizing the window stack
with the X server had to be updated quite heavily. In general the patch
avoids changing the fundamental approach being used but most of the code
did need some amount of re-factoring to consider what re-stacking
operations actually involve X or not and when we need to restack X
windows we sometimes need to search for a suitable X sibling to restack
relative too since the closest siblings may be Wayland windows.
This adds support for running mutter as a hybrid X and Wayland
compositor. It runs a headless XWayland server for X applications
that presents wayland surfaces back to mutter which mutter can then
composite.
This aims to not break Mutter's existing support for the traditional X
compositing model which means a single build of Mutter can be
distributed supporting the traditional model and the new Wayland based
compositing model.
TODO: although building with --disable-wayland has at least been tested,
I still haven't actually verified that running as a traditional
compositor isn't broken currently.
Note: At this point no input is supported
Note: multiple authors have contributed to this patch:
Authored-by: Robert Bragg <robert@linux.intel.com>
Authored-by: Neil Roberts <neil@linux.intel.com>
Authored-by: Rico Tzschichholz.
Authored-by: Giovanni Campagna <gcampagna@src.gnome.org>
This adds a --nested option to request that mutter no longer run as a
classic X compositor with an output window mapped on the X Composite
Overlay Window and also not assume it is running directly under X.
The intention is that in this mode Mutter will itself launch a headless
X server and display output will be handled by Clutter and Cogl. This
will enable running Mutter nested as an application within an X session.
This patch introduces an internal meta_is_wayland_compositor() function
as a means to condition the way mutter operates when running as a
traditional X compositor vs running as a wayland compositor where the
compositor and display server are combined into a single process.
Later we also expect to add a --kms option as another way of enabling
this wayland compositor mode that will assume full control of the
display hardware instead of running as a nested application.
This adds a --with-xwayland-path configure option that can be used to
specify the absolute path of a headless X server binary supporting
the wayland xserver protocol.
This adds a --enable-wayland configure option to enable building mutter
as a hybrid X and Wayland compositor. By default the option is disabled.
If enabled then HAVE_WAYLAND is defined for C code and as an automake
conditional.
This copies the xserver.xml wayland protocol into a protocol/ directory
since wayland support will depend on this protocol for communicating
with an xwayland X server. Copying the spec like this is consistent with
Weston so we don't need a configure option to locate an external spec.
We now track whether a window has an input shape specified via the X
Shape extension. Intersecting that with the bounding shape (as required
by the X Shape extension) we use the resulting rectangles to paint
window silhouettes when picking. As well as improving the correctness of
picking this should also be much more efficient because typically when
only picking solid rectangles then the need to actually render and issue
a read_pixels request can be optimized away and instead the picking is
done on the cpu.
GNOME Shell's actors aren't touch capable, so we need to make sure that
they get the fallback pointer emulated events for now. This fixes the top
bar and other elements not working on a touchscreen without a grab.
https://bugzilla.gnome.org/show_bug.cgi?id=697192
Some cards have 2k texture limits, which can be smaller than
commonly sized backgrounds.
One way to get around this problem is to use Cogl's "sliced texture"
feature, that transparently uses several hardware textures under the hood.
This commit changes background textures loaded from file to potentially
use slicing. Based on a patch by Jasper St. Pierre
<jstpierre@mecheye.net>.
https://bugzilla.gnome.org/show_bug.cgi?id=702283
Some cards have 2k texture limits, which can be smaller than
commonly sized backgrounds.
This commit downscales the background in this situation, so that
it won't fail to load.
https://bugzilla.gnome.org/show_bug.cgi?id=702283
Originally attached dialogs did not have a titlebar, which the code
still assumes though it hasn't been true for a while; nowadays, the
actual look of attached dialogs is controlled by the theme.
As GTK+ recently gained the ability to set custom titlebars, we need
to support attached dialogs with either full borders (WM decorations)
or border-only (GTK+ titlebar).
Just remove the left-over assumption to make it work as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=702764
We need to update window->monitor on override_redirect windows as well, other
wise they may end up with an invalid struct which triggers and assert when
meta_window_is_monitor_sized is called.
https://bugzilla.gnome.org/show_bug.cgi?id=702564
Avoid a round trip to the xserver we already have the current position
anyway. Querying from the server on every move can cause the compositor to
stall during movement.
Add new api (meta_screen_get_current_monitor_for_pos and
meta_screen_get_current_monitor_info_for_pos) that allow querying the monitor
without a roundtrip by reusing the passed in cursor position.
gnome-shell needs to know whether the stage window is focused so
it can synchronize between stage window focus and Clutter key actor
focus. Track all X windows, even those without MetaWindows, when
tracking the focus window, and add a compositor-level API to determine
when the stage is focused.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
When we set the input focus, we first set the predicted window,
and then try to process focus events. But as XI_FocusOut on the
existing window comes before XI_FocusIn on the new window, we'll
see the focus out on the old window and think the focus is going
to nothing, which makes mutter think the prediction failed.
This didn't really matter as nothing paid attention to the focus
window changing, but with gnome-shell's focus rework, we'll try
and drop keyboard focus in events like these.
Fix this by making sure that we ignore focus window changes of our
own cause when updating the focus window field, by ignoring all
focus events that have a serial the same as the focus request or
lower. Note that if mutter doens't make any requests after the
focus request, this could be racy, as another client could steal
the focus, but mutter would ignore it as the serial was the same.
Bump the serial by making a dummy ChangeProperty request to a
mutter-controlled window in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=701017
We substract one from the unredirect counter when enable_unredirect_for_screen
gets called. It is an unsigned integer so substracting one from zero (which means enable) would overflow and thus keep it peramently enabled.
This should never happen because it means there is an unmatched
enable / disable pair somewhere. So in addition to fixing it add a
warning when this case gets triggered.
https://bugzilla.gnome.org/show_bug.cgi?id=701224
Commit 4f2bb583bf changed things so that the compositor used
clutter_threads_add_repaint_func_full (CLUTTER_REPAINT_FLAGS_POST_PAINT
to get after-paint notification and send _NET_WM_FRAME_DRAWN, but this
doesn't actually work, since Clutter will already have blocked for
VBlank before calling post-paint functions.
The result is that frame synced toolkits like GTK 3.8 will normally
only be able to draw every other frame.
Since ::paint doesn't work either, a new function
clutter_stage_set_paint_callback() has been added to Clutter
(and will be included in the 1.14 branch)
https://bugzilla.gnome.org/show_bug.cgi?id=698794
We have no need for normally reported events during grabs. In fact, it
might be harmful. A plugin might grab the keyboard through
meta_begin_modal_for_plugin() and then expect events to be reported to
the grab window they provide. If meanwhile this XIGrabDevice is
issued, events might start being reported normally to one other of our
windows breaking the plugin event processing.
In particular, on an empty workspace, we set input focus to our
no_focus_window. Then, if gnome-shell calls
meta_begin_modal_for_plugin() and meta_display_freeze_keyboard(), in
that order, input events will start being reported to no_focus_window.
There are two issues with this. One is that no_focus_window isn't
selecting for XI input events and thus the server discards them
completely. But even if that is fixed, events being reported to any
window other than the one gnome-shell expects - the clutter stage
window - means that events will stop reaching it.
https://bugzilla.gnome.org/show_bug.cgi?id=701219
This will make it possible to implement input source switching in
gnome-shell using the popular modifiers-only keybinding that's
implemented on the X server through an XKB option.
https://bugzilla.gnome.org/show_bug.cgi?id=697002
We'll use this in gnome-shell to freeze the keyboard right before
switching input source and unfreeze it after that's finished so that
we don't lose any key events to the wrong input source.
https://bugzilla.gnome.org/show_bug.cgi?id=697001
If a binding is updated with a clear set of strokes (effectively
disabling it) we aren't signaling that the binding changed and thus
the previous strokes will continue to be grabbed.
This fixes that and tries to do a better effort at checking if the
binding changed or not.
https://bugzilla.gnome.org/show_bug.cgi?id=697000
gnome-shell has traditionally just called XSetInputFocus when wanting to
set the input focus to the stage window, but this might cause strange,
hard-to-reproduce bugs because of an interference with mutter's focus
prediction. Add API to allow gnome-shell to focus the stage window that
also updates mutter's internal focus prediction state.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
