This will be necessary in order to default to 'kernel' and then switch
to 'user' if the thread instance can no longer be properly multi
threaded.
To avoid having the same thread impl creating and destroying
GMainContext's, this also means always creating a GMainContext for the
thread-impl. When running in user-thread mode, the GMainContext is
wrapped in a wrapper source and dispatched as part of the real main
thread GMainContext, and when in kernel-thread mode, it runs
independently in the dedicated thread.
This has the consequence that the wrapper source will always have the
priority of the highest impl context GSource, but only after it has
dispatched once. Would we need it earlier than that, we either need a
way to introspect existing sources in a GMainContext and their
priorities, or manually track known sources in MetaThreadImpl.
The wrapper source will never be below 0, as that'd mean it could reach
INT_MAX priority if it had no more sources attached to it, meaning it'd
never be dispatched again.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2777>
While doing this, rename the old synchronous functions to more clearly
communicate that they expect to actually process the update during the
call, not just post it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2777>
While the default when passing NULL will be the main context of the main
thread, make it possible to specify another main context, so that
result handlers can be invoked on the right thread.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2777>
Callbacks could be queued to be invoked either on the impl side or the
main thread side of the thread; change this to take a GMainContext,
which effectively means a callback can be queued to be invoked on any
thread that has a GMainLoop running on its own GMainContext.
Flushing is made to handle flushing callbacks synchronously on all
threads. This works by keeping a hash table of queued callbacks per
thread (GMainContext); when flushing (from the main thread), callbacks
on the main thread context is flushed, followed by synchronization with
all the other threads.
meta_thread_flush_callbacks() is changed to no longer return the number
of dispatched callbacks; it becomes much harder when there are N queues
spread across multiple threads. Since it wasn't used for anything, just
drop the counting, making life slightly easier.
Feedback to thread tasks are however always queued on the callers
thread.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2777>
This uses the queue that was introduced when migrating impl task
management from MetaThread to MetaThreadImpl, with the exception that
it's now fully used as an actual queue. It now has a GSource that sits
on the right GMainContext that is dispatched whenever there are tasks to
execute.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2777>
It's the impl side that wants to add impl side idle sources, or fd
sources, etc, so make it part of MetaThreadImpl.
This changes things to be GAsyncQueue based. While things are still
technically single threaded, the GAsyncQueue type is used as later we'll
introduce queuing tasks asynchronously, then eventually queuing across
thread barriers.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2777>
It currently does exactly what MetaKms and MetaKmsImpl did regarding the
context separation, which is to isolate what may eventually run on a KMS
thread into a separate unit. It works somewhat like a "user thread",
i.e. not a real thread, but will eventually learn how to spawn a
"kernel thread", but provide the same API from the outside.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2777>
Remote desktop version 2 added a new method ConnectToEIS .
ConnectToEIS allows clients to requests a file descriptor from the
compositor which can then be used directly from libei.
Once established, the communication between compositor and application
is direct, without the need to go through the portal process(es).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
This adds the actual input capturing rerouting that takes events and
first hands them to the input capture session, would it be active.
Events are right now not actually processed in any way, but will
eventually be passed to a libei client using libeis.
A key binding for allowing cancelling the capture session is added
(defaults to <Super><Shift>Escape) to avoid getting stuck in case the client
doesn't even terminate the session.
The added test case makes sure that the pointer moves again after
pressing the keybinding.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
When a relative pointer motion gets constrained (e.g. a monitor edge or
barrier), save the constrained relative motion delta too.
This will later be used to send the remaining motion delta to input
capture clients.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
Adding a barrier and later enabling the input capture session will
create MetaBarrier instances for each added input capture barrier.
The barriers are created as "sticky" which means that when a pointer
hits the barrier, it'll stick to the point of entry, until it's
released.
The input capture session is also turned into a state machine with
explicit state, to more easily track things.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
This allows for a sticky barrier to hold the pointer until it is
released, but the owner of the barrier doesn't need a barrier event to
release it. It will be used to implement input capturing.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
A sticky barrier means that a pointer in motion intersecting a barrier
doesn't move once having hit it. The intention with this is to allow an
input capture clients to continue a motion once a barrier is hit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
This API aims to provide a way for users to capture input devices under
certain conditions, for example when a pointer crosses a specified
barrier.
So far only part of the API is implemented, specifially the session
management as well as zone advertisement, where a zone refers to a
region in the compositor which edges will eventually be made available
for barrier placement.
So far the remote access handle is created while the session is enable,
despite the input capturing isn't actually active yet. This will change
in the future once it can actually become active.
v2: Remove absolute/relative pointer, keep only pointer (ofourdan)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
Previously, restarting mutter in an X11 session resulted in
the previously set color temperature not being applied.
Fix that by applying the color temperature right after
the org.gnome.SettingsDaemon.Color proxy has been created.
Furthermore, only call `update_all_gamma()` from `on_gsd_color_ready()`
when the temperature has actually changed. Otherwise there is no need
since the current temperature has already been (or will soon be) applied
to all ready color devices.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3008>
In remote desktop sessions, streams can be created and destroyed
on-the-fly.
If a stream is gone, it is not necessarily an error.
So, don't treat that situation like an erroneous one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2911>
The previous logic didn't work correctly at least when priority-based
preeption wasn't supported by the DRM driver, such as in the case
of amdgpu. The call to glGetQueryObjecti64v would block on client
work which is already in progress (most likely for the next frame)
and delay notifying the ClutterFrameClock about presentation.
Conveniently, the Wayland transactions mechanism guarantees that all
fences of a dma-buf buffer are signalled before the buffer is
included in a frame, which means that dma-buf buffers are ready for
presentation when being directly scanned-out.
Direct scanout is only supported for dma-buf buffers too, which means
that all buffers going through direct scanout are effectively ready
and require no GPU rendering before presentation.
Assuming zero rendering time for dma-buf buffers going through direct
scanout simplifies the code and removes the need for
glGetQueryObjecti64v, thus avoiding the aforementioned issue where it
could block for longer than expected.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2766
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3080>
This means initializing the pointer position in MetaSeatImpl
synchronously too, otherwise it's not guaranteed querying the seat state
will result in the expected position.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3071>
I have a monitor which can report two preferred modes: 5120x1440@240
and 3840x1080@60. Since they are enumerated in this order by KMS,
init_output_modes would end up using 3840x1080@60 (and it was impossible
to select any 5120x1440 mode in the GNOME display settings).
Fix this by using meta_kms_connector_get_preferred_mode, which returns
the first KMS mode with DRM_MODE_TYPE_PREFERRED.
v2:
* Use meta_kms_connector_get_preferred_mode. (Jonas Ådahl)
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3055>
This will consist of device-added events, meaning before init finishes,
we can derive some state that depends on the set of input devices
available on startup, such as cursor visibility.
This avoids cursor visibility switching between hidden and visibility
during startup.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3070>
This opens up for a possibility to handle initial events (devices
discovered on startup) during initialization, meaning we can figure out
a more correct initial state that depends on available input devices.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3070>
This is different from "warping" as it doesn't necessarily result in a
pointer motion event. This can be helpful during initializing so we can
avoid faked pointer events that would otherwise need to be special cased
to not appear as actual pointer movements.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3070>
