Lets use a pbuffer surface as a dummy surface instead of a gbm based
one, so that we don't need to rely on the availability of gbm to create
a dummy surface when there is no need for it.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Separate gbm initialization from general renderer initialization. Do
this even though no other initialization is done for now; later there
will will be other types of rendering mode, initialized in their own
functions.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
In another step getting rid of the duplications introduced by Cogl,
use the equivalent GLib types where Cogl types previously used. While
CoglBool is not a typedef to gboolean, they are both typedefs to int,
and we already use GLib's TRUE/FALSE to set them.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Initialize the GError pointer used when creating the renderer. If an
error occurs, the error is expected to be NULL, otherwise it'll
misinterpreted as already set.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Stylus configuration (stylus buttons, pressure) was handled
at the very high level, doing the button and pressure translations
right before sending these to wayland clients.
However, it makes more sense to store these settings into the
ClutterInputDeviceTool itself, and have clutter apply the config
at the lower level so 1) the settings actually apply desktop-wide,
not just in clients and 2) X11 and wayland may share similar
configuration paths. The settings are now just applied whenever
the tool enters proximity, in reaction to
ClutterDeviceManager::tool-changed.
This commit moves all handling of these two settings to
the clutter level, and removes the wayland-specific paths
https://bugzilla.gnome.org/show_bug.cgi?id=773779
Enabling edge scrolling before disabling two finger would result in
edge scrolling not actually being enabled because two finger is still
enabled at the time and we bail out.
This patch moves this logic to common code for both the native and X
backends and fixes it by ensuring that both settings are never set at
the same time and still re-checking if edge scrolling should be
enabled after two finger scrolling gets disabled.
We also simplify the code by not checking for supported/available
settings since the underlying devices will just reject those values
and there isn't anything we can do about it here. It's the UI's job to
only show supported/available settings to users.
https://bugzilla.gnome.org/show_bug.cgi?id=771744
Checking for supported methods isn't needed since libinput will just
error out and do nothing itself if a requested method isn't supported
and, in fact, this logic was preventing the enum values 0 from being
set.
https://bugzilla.gnome.org/show_bug.cgi?id=771744
commit e2bfaf0751 does this:
g_hash_table_insert (cards,
g_udev_device_get_name (parent_device),
g_steal_pointer (&parent_device));
The problem is the g_steal_pointer call may happen before the
g_udev_device_get_name call leading to a crash.
This commit does the get_name call on an earlier line
https://bugzilla.gnome.org/show_bug.cgi?id=771442
Right now we accept any character device that matches the glob card*.
That's fine, but we can be a little more specific by checking that
the devtype is what we expect.
This commit does that.
https://bugzilla.gnome.org/show_bug.cgi?id=771442
Despite g_udev_client_new taking a list of subsystems, it doesn't
implicitly filter results to those subsystems.
This commit explicitly adds a subsystem match to make sure sound cards
don't end up in the resulting list of video cards.
https://bugzilla.gnome.org/show_bug.cgi?id=771442
Using the view's MetaMonitorInfo to find all the crtcs which should be
configured to display a given onscreen doesn't work unfortunately. The
association runs only the other way around, i.e. we need to go through
each crtc and find the ones corresponding to our monitor info.
https://bugzilla.gnome.org/show_bug.cgi?id=773115
If this isn't initialized and an idle watch gets instanced before
meta_idle_monitor_native_reset_idletime() gets called, that idle watch
would get triggered as soon as we hit the main loop.
This was causing gnome-session to go into idle mode at session start
thus making gnome-shell lock the screen.
In the past this bug was being masked by either logind emiting
session active signals or a stray input event making it through at
startup.
https://bugzilla.gnome.org/show_bug.cgi?id=772839
This isn't technically needed and, in fact, makes us default to
interlaced modes in some cases which isn't desirable.
Note that X doesn't account for these flags either for its mode
refresh rates.
https://bugzilla.gnome.org/show_bug.cgi?id=772176
As the m format specifier doesn't consume any arguments, the number
of varargs currently doesn't match the number of specifiers; the
failed transform may be relevant, so include it in the message
instead of removing the excess argument.
Some output devices only advertise their preferred mode even though
they're able to display others too. This means we can include some
common modes in each output's supported list.
This is particularly important for mirroring, since we can only mirror
outputs which are using the same resolution.
https://bugzilla.gnome.org/show_bug.cgi?id=744544
This signal allows interested parties to be notified of a new cursor
frame being painted regardless of whether it's being painted by the
backend directly or if it's a software rendered cursor frame handled
by clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=749913
Switch to the output naming logic used by the X server's modesetting
driver which, in particular, uses drmModeConnector's connector_type_id
instead of connector_id.
The kernel generates new connector_id's every time there are changes
which means we can't identify the same monitor on the same connector
after an hardware hotplug. Switching to connector_type_id fixes this.
https://bugzilla.gnome.org/show_bug.cgi?id=770338
We can only honor this properly in the MUTTER_STAGE_VIEWS=1 case. When using
the legacy view, software implemented transforms are only exposed if there is
only one output, as we can only transform the entire stage there.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
The texture is only created if the view is transformed at the software level,
otherwise the texture is NULL, and rendering happens on the onscreen.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
The offscreen is given through the ::back-buffer property, the ClutterStageView
will set up the the CoglPipeline used to render it back to the "onscreen"
framebuffer.
The pipeline can be altered through the setup_pipeline() vfunc, so ClutterStageView
implementations can alter the default behavior of blitting from offscreen to
onscreen with no transformations.
All getters of "the framebuffer" that were expecting to get an onscreen have
been updated to call the right clutter_stage_view_get_onscreen() function.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
The call to _cogl_framebuffer_winsys_update_size() results in no-op here,
as the framebuffer has already the right size when rebuilding the views.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
Those will need a separate treatment from the modes that we eventually
support through "software", so split those into a separate enum so we
can can do the right thing when applying the configuration.
Also, add a helper function that returns the transform that the software
fallbacks should perform, which should be "normal" if the rotation is
already handled via hw.
The function applying the configuration has been modified to always set
a HW rotation mode (even if normal), when we come to support SW rotation
modes, we'll be relying on a normal transformation, so it will be
necessary to have mixed HW/SW managed transforms.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
The scale will have been set to 1 no matter what when initializing the
MetaOutput since it at the time didn't have an CRTC assigned to it.
Now, when we assign the CRTC to the output, we need to update the scale.
https://bugzilla.gnome.org/show_bug.cgi?id=769505
Support changing the mouse and trackball acceleration profile. This
makes it possible to for example disable pointer acceleration by
choosing the 'flat' profile.
This adds an optional dependency on gudev. Gudev is used by the X11
backend to detect whether a device is a mouse or not. Without gudev
support, the accel profile settings has have effect for mouse devices.
Trackball still uses the "strstr" approach, since udev doesn't support
tagging devices as trackball devices yet.
https://bugzilla.gnome.org/show_bug.cgi?id=769179
Add support for setting edge-scrolling separately from two-finger
scrolling. We now have 2 separate boolean settings for those, with the
Mouse panel in gnome-control-center allowing to set only one of those at
a time, but nothing precludes both being set in the configuration.
We need to handle:
- two-finger-scrolling-enabled and edge-scrolling-enabled settings both
being set.
- those 2 settings being change out-of-order
- two-finger-scrolling being set on a device that doesn't support it
- edge-scrolling-enabled on a device that doesn't support it
And the combinations of one touchpad supporting just one of edge
scrolling and two-finger scrolling and another vice-versa.
https://bugzilla.gnome.org/show_bug.cgi?id=768245
They are already effectively interchangeable so this should reduce
pointless casts.
Just like in GDK though, we need to keep the old definition for
instrospection to be able to include the struct's fields.
By creating a pending gbm/EGL surface pair, only setting it on
swap-buffers, we would draw onto a buffer on the old surface, then swap
the buffer from the new surface, causing the first frame after a
hot-plug always having no content.
This was in the past not very noticable since some non-deterministic but
frequent side effect in gnome-shell caused hot-plugging to always render
two new frames, but after "Introduce regional stage rendering", this
side effect did not occur as often, thus making it more visible.
This commit updates the current gbm/EGL surface pair before painting a
frame, so that when the frame is painted, the surface with the correct
size is used and the buffer from correct surface is swapped.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
CoglFrameInfo is a frame info container associated with a single
onscreen framebuffer. The clutter stage will eventually support drawing
a stage frame with multiple onscreen framebuffers, thus needs its own
frame info container.
This patch introduces a new stage signal 'presented' and a accompaning
ClutterFrameInfo and adapts the stage windows and past onscreen frame
callbacks users to use the signal and new info container.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Call a CoglContext "cogl_context", CoglDisplay "cogl_display" and
CoglRenderer "cogl_renderer" so that they won't be confused with
ClutterContext, MetaDisplay and MetaRenderer etc.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
