When glScissor is called it needs to pass coordinates in GL's
coordinate space where the origin is the bottom left. Previously this
conversion was done before storing the window rect in the clip
stack. However this might make it more difficult if we want to be able
to grab a handle to a clip stack and use it in different circumstances
later. This patch moves the coordinate conversion to inside the clip
state flushing code.
The stack is now stored as a list of reference counted entries.
Instead of using a GList, each entry now contains a link with a
reference to its parent. The idea is that this would allow copying
stacks with a shared ancestry.
Previously the code flushed the state by finding the bottom of the
stack and then applying each entry by walking back up to the top. This
is slightly harder to do now because the list is no longer
doubly-linked. However I don't think it matters which order the
entries are applied so I've just changed it to apply them in reverse
order.
There was also a restriction that if ever the stencil buffer is used
then we could no longer use clip planes for any subsequent entries. I
don't think this makes sense because it should always work as long as
it doesn't attempt to use the clip planes more than once. I've
therefore removed the restriction.
The Actor's long description is a bit cluttered; it contains a section
on the actor's box semantics, on the transformation order and on the
event handling.
We should use <refsect2> tags to divide the Actor's description into
logically separated sections.
We should also add a section about the custom Scriptable properties that
ClutterActor defines, and the special handling of unit-based properties.
The CoglAtlasTexture struct was not being freed in
_cogl_atlas_texture_free so there would be a small leak whenever a
texture was destroyed.
Thanks to Robert Bragg for spotting this.
CoglMaterial now sets GL_CLAMP_TO_EDGE if WRAP_MODE_AUTOMATIC is used
unless it is overridden when the material is flushed. The primitives
are still expected to expose repeat semantics so no user visible
changes are made. The idea is that drawing non-repeated textures is
the most common case so if we make clamp_to_ege the default then we
will reduce the number of times we have to override the
material. Avoiding overrides will become important if the overriding
mechanism is replaced with one where the primitive is expected to copy
the material and change that instead.
Previously, Cogl's texture coordinate system was effectively always
GL_REPEAT so that if an application specifies coordinates outside the
range 0→1 it would get repeated copies of the texture. It would
however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates
are in the range 0→1 so that in the common case that the whole texture
is being drawn with linear filtering it will not blend in edge pixels
from the opposite sides.
This patch adds the option for applications to change the wrap mode
per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge'
and 'automatic'. The automatic map mode is the default and it
implements the previous behaviour. The wrap mode can be changed for
the s and t coordinates independently. I've tried to make the
internals support setting the r coordinate but as we don't support 3D
textures yet I haven't exposed any public API for it.
The texture backends still have a set_wrap_mode virtual but this value
is intended to be transitory and it will be changed whenever the
material is flushed (although the backends are expected to cache it so
that it won't use too many GL calls). In my understanding this value
was always meant to be transitory and all primitives were meant to set
the value before drawing. However there were comments suggesting that
this is not the expected behaviour. In particular the vertex buffer
drawing code never set a wrap mode so it would end up with whatever
the texture was previously used for. These issues are now fixed
because the material will always set the wrap modes.
There is code to manually implement clamp-to-edge for textures that
can't be hardware repeated. However this doesn't fully work because it
relies on being able to draw the stretched parts using quads with the
same values for tx1 and tx2. The texture iteration code doesn't
support this so it breaks. This is a separate bug and it isn't
trivially solved.
When flushing a material there are now extra options to set wrap mode
overrides. The overrides are an array of values for each layer that
specifies an override for the s, t or r coordinates. The primitives
use this to implement the automatic wrap mode. cogl_polygon also uses
it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced
textures. Although this code has been added it looks like the sliced
trick has been broken for a while and I haven't attempted to fix it
here.
I've added a constant to represent the maximum number of layers that a
material supports so that I can size the overrides array. I've set it
to 32 because as far as I can tell we have that limit imposed anyway
because the other flush options use a guint32 to store a flag about
each layer. The overrides array ends up adding 32 bytes to each flush
options struct which may be a concern.
http://bugzilla.openedhand.com/show_bug.cgi?id=2063
GL supports setting different wrap modes for the s, t and r
coordinates so we should design the backend interface to support that
also. The r coordinate is not currently used by any of the backends
but we might as well have it to make life easier if we ever add
support for 3D textures.
http://bugzilla.openedhand.com/show_bug.cgi?id=2063
CoglColor and CoglMatrix have public declarations with private members
so that we are free to change the implementation but the structures
could still be allocated on the stack in applications. However it's
quite easy not to realise the members are private and then access them
directly. This patch wraps the members in a macro which redefines the
symbol name when including the header outside of the clutter source.
http://bugzilla.openedhand.com/show_bug.cgi?id=2065
The xx, yx, zx etc fields are meant to be read-only but they were
marked as private with the gtk-doc annotation. This patch moves the
private marker so that the 16 float member fields are public but the
type, inverted matrix, flags and padding are not.
When emitting signals, one can mark arguments as being "static", ie an
indication this argument will not change during the signal emission.
This allows the signal marshalling code to create static GValues, in
this case not to copy the Color.
http://bugzilla.openedhand.com/show_bug.cgi?id=2073
We decide whether the paint() should be a real paint or a paint in pick
mode depending on the global pick_mode value. Using G_UNLIKELY() on an
operation that most likely is going to be executed once every frame is
going to blow a lot of cache lines and frak with the CPU branch
prediction. Not good.
This adds three new API calls:
CoglHandle cogl_path_get()
void cogl_path_set(CoglHandle path)
CoglHandle cogl_path_copy(CoglHandle path)
All of the fields relating to the path have been moved from the Cogl
context to a new CoglPath handle type. The cogl context now just
contains a CoglPath handle. All of the existing path commands
manipulate the data in the current path handle. cogl_path_new now just
creates a new path handle and unrefs the old one.
The path handle can be stored for later with cogl_path_get. The path
can then be copied with cogl_path_copy. Internally it implements
copy-on-write semantics with an extra optimisation that it will only
copy the data if the new path is modified, but not if the original
path is modified. It can do this because the only way to modify a path
is by appending to it so the copied path is able to store its own path
length and only render the nodes up to that length. For this to work
the copied path also needs to keep its own copies of the path extents
because the parent path may change these by adding nodes.
The clip stack now uses the cogl_path_copy mechanism to store paths in
the stack instead of directly copying the data. This should save some
memory and processing time.
Although cogl_multiply_matrix was consistent with OpenGL, after further
consideration it was agreed that cogl_transform is a better name. Given
that it's in the global cogl_ namespace cogl_transform seems more self
documenting.
This adds an example of how to setup a Clutter style 2D coordinate space
and clarifies what state is owned by a framebuffer. (projection,
modelview, viewport and clip stack)
When we expose more cogl_framebuffer API this example will hopefully be
migrated into a more extensive introduction to using framebuffers.
Previously cogl_set_source and cogl_set_source_texture were in
cogl-material.c and the cogl_set_source_color* funcs were in
cogl-color.c. Originally this was because cogl.c was duplicated between
the GL and GLES backends and we didn't want to add to the amount of
duplicated code, but these files have since been consolidated into one
cogl.c.
Quite often it's desirable to be able to multiply the current modelview
matrix by an arbitrary matrix. Currently though you have to first
explicitly call cogl_get_modelview_matrix to get the current modelview
into a temporary variable, then you need to multiply it with your matrix
using cogl_matrix_multiply and finally use cogl_set_modelview_matrix to
make the result be the new modelview. This new convenience function lets
more efficiently skip the first get and last set steps.
Every now and then someone sees the cogl_enable API and gets confused,
thinking its public API so this renames the symbol to be clear that it's
is an internal only API.
ClutterX11TexturePixmap calls get_allocation_box() when queueing a
clipped redraw. If the allocation is not valid, and if we queue a
lot of redraws in response to a series of damage events, the net
result is that we spend all our time in a re-layout. We can
short-circuit this by checking if the actor has a valid allocation, and
if not, just queue a redraw - the actor will be allocated by the time it
is going to be painted.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Add clutter_actor_has_allocation(), a method meant to be used when
deciding whether to call clutter_actor_get_allocation_box() or any
of its wrappers.
The get_allocation_box() method will, in case the allocation is invalid,
perform a costly re-allocation cycle to ensure that the returned box
is valid. The has_allocation() method is meant to be used if we have an
actor calling get_allocation_box() from outside the place where the
allocation is always guaranteed to be valid.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Added new "homogeneous" mode to ClutterBoxLayout, that makes layout children
get all the same size.
This is heavily inspired in the "homogeneous" attribute available in GtkBox,
but simplified as we don't have padding nor borders in box layout, only
spacing.
Also added to test-box-layout a key to set/unset homogeneous mode.
* Coding style fixes.
* Added proper test for homogeneous mode in box layout.
* Fix in homogeneous mode.
http://bugzilla.openedhand.com/show_bug.cgi?id=2034
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Somebody somewhere decided it would be ok to define 'y1' as a global
function in math.h thus condemning us to repeatedly making commits to
fix these obnoxious compiler warnings about aliasing.
glXSwapIntervalSGI only affects buffer swaps to the
current GLX drawable.
That means that calling it once in clutter_backend_glx_get_features
isn't sufficent, so set it up in clutter_backend_glx_ensure_context to
make sure it affects buffer swaps for the current drawable.
http://bugzilla.openedhand.com/show_bug.cgi?id=2044
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Move the size check after the NULL check, add the clip height into the
check logic and fix up the comment.
http://bugzilla.openedhand.com/show_bug.cgi?id=2040
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When printing out the property value during a ClutterScript debug run we
generate the value's content using g_strdup_value_contents() - though we
do it unconditionally. The contents might not be printed (they most
likely won't, actually) and will be freed afterwards. This is
unnecessary: we can allocate the contents string after checking if we're
going to print out the debug note, thus avoiding the whole
allocation/free cycle unless strictly needed.
When setting up the state for a layer, we need to switch texture
units before we do anything that might bind the texture, or
we'll bind the wrong texture to the previous unit.
http://bugzilla.openedhand.com/show_bug.cgi?id=2033
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
* Add new clutter_geometry_union(), because writing union intersection
is harder than it looks. Fixes two problems with the inline code in
clutter_stage_glx_add_redraw_clip().
1) The ->x and ->y of were reassigned to before using them to
compute the new width and height.
2) since ClutterGeometry has unsigned width, x + width is unsigned,
and comparison goes wrong if either rectangle has a negative
x + width. (We fixed width for GdkRectangle to be signed for GTK+-2.0,
this is a potent source of bugs.)
* Use in clutter_stage_glx_add_redraw_clip()
* Account for the case where the incoming rectangle is empty, and don't
end up with the stage being entirely redrawn.
* Account for the case where the stage already has a degenerate
width and don't end up with redrawing only the new rectangle and not
the rest of the stage.
The better fix here for the second two problems is to stop using a 0
width to mean the entire stage, but this should work for now.
http://bugzilla.openedhand.com/show_bug.cgi?id=2040
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
We need to set up the rowstride and alignment properly in
CoglTexture2D before reading texture data.
http://bugzilla.openedhand.com/show_bug.cgi?id=2036
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If you forgot to call clutter_init() then you currently end up with a
warning saying that the stage cannot be initialized because the backend
does not support multiple stages. Clearly not useful.
We can catch some of the missing initialization in the features API,
since we will likely end up asking for a feature at some point.
We kind of assume that stuff will break well before during the
ClutterBackend::create_context() implementation if we fail to create a
GL context. We do, however, have error reporting in place inside the
Backend API to catch those cases. Unfortunately, since we switched to
lazy initialization of the Stage, there can be a case of GL context
creation failure that still leads to a successful initialization - and a
segmentation fault later on. This is clearly Not Good™.
Let's try to catch a failure in all the places calling create_context()
and report back to the user the error in a meaningful way, before
crashing and burning.
If you call get_n_columns() during the instance initialization phase but
before set_name()/set_types() have been called, you'll get a (guint) -1.
This is less than ideal.
If columns haven't been initialized we should just return 0, which was
the intent of the API since the beginning.
Based on a patch by: Bastian Winkler <buz@netbuz.org>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The int storage, and the initial value of -1, is used as a guard when
subclassing ClutterListModel to allow the sub-class to call
clutter_model_set_names() and clutter_model_set_types().
This reverts commit c274118a8f.
This makes it more likely consumers notice invalid unreferences.
GObject has the same assertion.
http://bugzilla.openedhand.com/show_bug.cgi?id=2029
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
clutter_model_get_n_columns is supposed to return a guint, so the
n_columns field needs to be a guint with the initial value set to 0.
http://bugzilla.openedhand.com/show_bug.cgi?id=2017
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When entering cogl_texture_2d_new_from_bitmap the internal format can
be COGL_PIXEL_FORMAT_ANY. This was causing _cogl_texture_2d_can_create
to use an invalid GL format type. Mesa apparently ignores this but it
was causing errors when Cogl is compiled with debugging under NVidia.
http://bugzilla.openedhand.com/show_bug.cgi?id=2026
Add a return result from CoglTexture.transform_quad_coords_to_gl(),
so that we can properly determine the nature of repeats in
the face of GL_TEXTURE_RECTANGLE_ARB, where the returned
coordinates are not normalized.
The comment "We also work out whether any of the texture
coordinates are outside the range [0.0,1.0]. We need to do
this after calling transform_coords_to_gl in case the texture
backend is munging the coordinates (such as in the sub texture
backend)." is disregarded and removed, since it's actually
the virtual coordinates that determine whether we repeat,
not the GL coordinates.
Warnings about disregarded layers are used in all cases where
applicable, including for subtextures.
http://bugzilla.openedhand.com/show_bug.cgi?id=2016
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Fix clutter initialisation if argb visuals are enabled, setting a border
color on creating the dummy window. This should avoid BadMatch happening
when the depth of the root window visual is not the same of the depth
of the argb visual.
http://bugzilla.openedhand.com/show_bug.cgi?id=2011
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Backport of the upstream JSON-GLib commit that improved the strictness
of JsonParser.
The original upstream commit is:
29881f03468db08bfb404cfcd5b61b4cdc419a87
