It's been long enough. We can mandate support for these, at least
at build-time. The code doesn't actually compile without either
of these, so just consider that unsupported.
Now that we have a global MetaScreen, we can simply have a global
MetaCursorTracker as well. Keep the get_for_screen() API around for
compatibility, though.
The Alt+F7 and Alt+F8 keybinds for moving and resizing windows allow you
to move and resize the window off the screen, so allow the same for the
menu items as well, since they're marked with the same accelerator.
https://bugzilla.gnome.org/show_bug.cgi?id=728617
This doesn't particularly matter, since we fall through into a default
case that does nothing right below, but this matches the other paths
and it prevents us from falling into a trap if we add other event types
below.
If we start a grab op from a keybind / menu, we'll handle the
ButtonPress and drop the grab then, never giving the window a chance
to handle what it needs to do before the grab is dropped.
This means that if you use Alt+F7 to move a window around, move it
to a side-tiling or maximization area, and then left-click, it will
just hang there in the sky.
The entire point of it was to check whether the window was on the
right screen. Since we don't handle multiple screens anymore, we
don't need to check anything anymore.
Looking at the code paths where is_mouse / is_keyboard are used,
all of them should never be run when dealing with a COMPOSITOR
grab op, since they're filtered out above or the method is just
never run during that time.
It's confusing that COMPOSITOR is in here, and requires us to
be funny with other places in code, so just take it out.
pointer->current needs to always be the surface under the pointer,
even when we have a grab. We do need to make sure we keep the focus
surface the same even when we have a grab, though, so add logic
for that.
In order to correctly fix the issue to make sure we only set the
focused surface to NULL during a grab, but not the current surface,
we need to merge update_current_surface back into repick_for_event
so we have more control over the behavior here.
... not when we do an update.
We only repick when we handle events, not when we update. Perhaps
this is a mistake.
Since update runs before handle_event, this means that when we
drop a grab, update will notice the NULL surface, since we haven't
repicked after the event, and then we'll repick the correct surface.
The end result is that you see a root cursor after a grab ends,
rather than the correct window cursor.
This doesn't fix it, since the current surface becomes NULL when
we start the grab. But it does make the code here more correct when
we fix that bug.
I was talking with other people and they became confused at the
term "double-buffered", since we were also talking about
double-buffering in general, e.g. swapping between two buffers.
Instead, we'll adapt the "pending state" nomenclature that we
already use for the field / variable names.
If we have a focused surface, we need to eat up key events, not
just if we have a non-empty focus resource list. The latter would
happen if we have a focused client but it never called get_keyboard.
The latest Xorg / Xwayland has support for -displayfd being used
in conjunction with an explicit display number. Use that to know
when the X server is ready, rather than UNIX signals, because
they're UNIX signals.
We track changes to windows fullscreen state and stacking order
to determine a monitor's in-fullscreen state, but missed the
obvious case of moving a fullscreen window between monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=728395
Commit 585fdd781c not only removed the tabpopup, but set invalid
handlers (a.k.a. NULL) for those shortcuts; add back handling of
basic handling of those shortcuts by switching instantly without any
popups.
https://bugzilla.gnome.org/show_bug.cgi?id=728423
If we're sending out a configure event, we can't immediately move the
window; we need to instead wait to apply the new position when the
client sends a new buffer.
dx/dy should be against the regular window's rect, and need to
be ignored when we're resizing. Instead, we use gravity to anchor
the window's new rectangle when resizing.
Sophisticated clients, like those using ClutterGtk, will have more
than one focused resource per client, as both Clutter and GDK will
ask for a wl_pointer / wl_keyboard. Support this naturally using
the same "hack" as Weston: multiple resource lists, where we move
elements from one to the other.
In order to support multiple pointers for the same client, we're
going to need to kill it.
This will cause crashes for now, but will be fixed by the next
commit.
Doing this synchronously means that zenity tries to initialize GTK+.
Under Wayland, that will try to connect back to mutter as a display
server. We're waiting on zenity to exit, and zenity is waiting for
a connection response. Deadlock.
Simply assume that zenity will support all the options we feed it,
since it should be the correct version. Perhaps we should replace
our use of zenity with a simple helper binary that we know will
have all the right options if this still isn't good enough.
Our focus stealing prevention is still mostly inherited from metacity;
in particular, a (non-transient) window that is not on the current
workspace will not be given focus. This behavior made sense in the
GNOME 2 days, where workspaces were separated much more strictly.
However this is no longer the case in GNOME 3 - activating a launcher
will switch workspaces if necessary, and so will the app switcher.
There is no good reason to not do the same for other user actions
like clicking a URL or activating a search result, so allow activation
of windows on non-active workspaces if a proper timestamp is supplied,
assuming that this is a strong enough indication that we are dealing
with a legitimate user action.
https://bugzilla.gnome.org/show_bug.cgi?id=728018
Effectively we have been accepting CurrentTime timestamps for years,
but still complained about "stupid pagers" when encountering them;
just accept that we will never limit treating 0 timestamps as current
time to pagers.
https://bugzilla.gnome.org/show_bug.cgi?id=728018
The code that restacks X11 windows at the end first tracks any
old windows we know about, and then handles any windows created.
It starts when it ended, and then walks forwards and then
back looking for the first X11 window it doesn't know about.
However, when there aren't any X11 windows, it flies off the end
of the array and starts looking through random memory.
When it finds the X11 window, it then goes through and then tries
to restack the remaining windows according to how we've sorted
them.
Unfortunately, META_WINDOW_CLIENT_TYPE_X11 is 0, which is quite
common in random memory we have lying around, so we enter that
path and then just crash.
Fix the buffer overrun by adding the proper bounds check to the
search.
You can easily reproduce this by opening a menu while bloatpad
is full-screen. Why it only crashes when full-screen and not
when a standard window, I have no idea.
default_grab_focus tries to add implicit grab semantics where
focus won't take effect if there's a pointer button down. This
is not what we want for popup grabs at all, as it's perfectly
valid to want to drag on a menu while there's a button down.
The idea here is that while we take a WM-side grab, like a compositor
grab or a resizing grab, we need to remove the focus from the Wayland
client.
We make a special exception for CLICKING operations, because these
are really an internal state machine while you're pressing on a button
inside a frame, and in this case, we need to not kill the focus.
Really, it is a special case. When the subsurface is synchronous,
commit changes meaning from being applied immediately to being
queued up for replay later. Handle this explicit special case
with an explicit special case in the code.
This means that in all other paths, we can unconditionally
apply the actor immediately.
Even when it doesn't have a role.
This fixes cursors not quite working right, as they're a "detached"
surface without a role since nobody called set_cursor on them yet.
Instead of using commit_attached_buffer / actor_surface_commit.
We want to kill the return values of these methods because we
really should always be calling them, even if the surface doesn't
have a role.
This is also something that we did upstream. Since we want to
introduce an explicit "xdg_transient" window type for tooltips
and popovers, and since "transient_for" is a confusing dumb
80s term lifted from the ICCCM spec, just rename it.
This was changed upstream a little while ago for C++ compatibility.
It's also the more common term for the operation: you close a window,
you don't delete one. In fact, a delete event might seem like it
would be about resource management instead.
Except while reading _NET_WM_WINDOW_OPACITY, opacity is between 0 and 255. With
guint8, we'll get compiler warnings if arbitrary int values are passed.
https://bugzilla.gnome.org/show_bug.cgi?id=727874
This has one regression: the basic touch support added by
Carlos Garnacho in 991c85f is now partially reverted, since
we ported to Clutter events for this. We'll need to either
port his changes to Clutter, or restructure event handling
in mutter directly.
We can't really support the Gtk+ automatic scaling, as to much
code relies on the GdkWindow and XWindow sizes, etc to match.
In order to keep working we just disable the scaling, meaning
we will pick up the larger fonts, but nothing else. Its not
ideal but it works for now.
https://bugzilla.gnome.org/show_bug.cgi?id=706388
When _GTK_FRAME_EXTENTS changes, we need to redo constraints on
the window - this matters in particular if the toolkit removes
invisible borders when a window is maximized, since otherwise
the maximized window will be positioned as if it still has
invisible borders.
https://bugzilla.gnome.org/show_bug.cgi?id=714707
A gulong is not enough to get 64 bits in all arches, so we must
cast it, or we can corrupt the stack.
This was downstream bug bugzilla.redhat.com/show_bug.cgi?id=1002055
https://bugzilla.gnome.org/show_bug.cgi?id=707267
Apparently some connector technologies don't distinguish between
on and off, and there might be valid use cases for running without
any connected monitor.
In that case, just avoid any configuration at all.
https://bugzilla.gnome.org/show_bug.cgi?id=709009
Each level in the tower is initialized by binding the texture for that
level to an offscreen framebuffer and rendering the previous level as a
textured rectangle. The problem was that we were blending the previous
level with undefined data so argb32 windows with transparencies would
result in artefacts. This makes sure to disable blending when drawing
the textured rectangle.
After reading the atom, scale the value from 0xffffffff to 0xff. Not doing so
causes Clutter to truncate the opacity value, and only read the last two digits.
Hence, 0x7fffffff (50%) becomes 0xff (100%).
https://bugzilla.gnome.org/show_bug.cgi?id=727874
After reading the atom, scale the value from 0xffffffff to 0xff. Not doing so
causes Clutter to truncate the opacity value, and only read the last two digits.
Hence, 0x7fffffff (50%) becomes 0xff (100%).
https://bugzilla.gnome.org/show_bug.cgi?id=727874
A careful analysis of mutter's codebase shows that nothing actually
passes anything but 0 to this. gnome-shell has one instance, but it's
most likely a mistake.
Remove the grab_mask field and the one place in keybindings.c that uses it.
The parameter to begin_grab_op is left in for API compatibility reasons.
Since we get the ClientMessage after the surface is created, there's
no good way to synchronize the two streams. In this case, what we
need to do is delay the surface commit until after we get the
ClientMessage. Ideally, we'd be using a better surface system overall
where committing the surface didn't depend on what type it is, but
oh well, this is a good short-term hack for now.
This is effectively the same, but since we lose the xserver.xml protocol
in the new XWayland DDX, we have to use SIGUSR1 anyway, so might as well
switch over now.
The make_toplevel / window_unmanaging interface has never made
a lot of sense to me. Replace it with set_window, which does
effectively the same thing.
It's still not perfect in the case of XWayland, but I don't think
XWayland will ever make me happy.
It should be META_TYPE_WAYLAND_STAGE, not META_WAYLAND_TYPE_STAGE.
Well, actually, it *should* be META_TYPE_NATIVE_STAGE, because it's
not related to Wayland at all. But that comes later :)
Right now this just has all of the files in one directory. We'll
be introducing more structure to this in the future, and build
a proper backend system.
This will allow us to have a MetaCursorReference 'subclass' that's
lazily loaded. We currently always load all the images.
The long-term plan is to have a subclass for each "backend" and only
have CoglTexture as a common denominator. For the nested X11 backend,
we use XDefineCursor on our stage window. For the Wayland backend, we
would use set_cursor on our stage surface. For the native backend, we
would use the GBM code that's there right now.
The CoglTexture is there to be a "shared fallback" between all devices,
and also for the get_sprite API.
The odd man out is the X11 compositor case. For that, we need to move
the responsibility of setting the final cursor image out of
MetaCursorTracker, and simply have it be about tracking the used sprite
image and pointer position.
We want to make this private, and have MetaCursorReference be
backend-defined, with the texture possibly loaded on demand.
We can't make the definition of MetaCursorReference truly private yet
because of the XFixes cursor. A victim of MetaCursorTracker trying to
do too many things at once...
I want the MetaCursorTracker to mostly be about retrieving cursor
information. Start moving the code that loads cursor images to a
new file, MetaCursor. Eventually, MetaCursorTracker's APIs will
all take MetaCursorReferences, and we can have a clean backend
split here.
For whatever reason, this hash table was in the generic
implementation section instead of the XSync implementation,
even though it's only used by the XSync implementation.
Use it as a first pass of things to move over.
The reason we don't simply use gdk_window_add_filter directly is
because of some twisted idea that any GDK symbol being used from
core/ is a layer violation. While we certainly want to keep any
serious GDK code out of ui/, event handling is quite important
to have in core/, so simply use a GDK event filter directly.
The code here before was completely wrong. Not only did it mix up
coordinate spaces of "client rect" vs. "frame rect", but it used
meta_frame_get_frame_bounds, which is specifically for the *visible*
bounds of a window!
In the case that we don't have a bounding or input shape region at
all on the client window, the input shape that we should apply is
the surface's natural shape. So, set the region to NULL to get the
natural rect picking semantics.
Really, visible_to_compositor means that the window is shown, e.g.
not minimized. We need to be using a boolean tracking whether we've
called meta_compositor_add_window / meta_compositor_remove_window.
This fixes a jump during window placement when a window appears.
visible_to_compositor should always be in sync with show_window /
hide_window calls, even when unmananging.
This fixes a crash where we call sync_window_state when the window
is unmanaging, since we use visible_to_compositor to determine whether
the compositor will crash.
This is actually wrong; we should be using the knowledge about
whether we have called add_window / remove_window. We'll introduce
this with a new boolean next time.
We guarantee ourselves that a valid pixmap will appear any time
that the window is painted. The window actor will be scheduled
for a repaint if it's added / removed from the scene graph, like
during construction, if the size changes, or if we receive damage,
which are the existing use cases where this function is called.
So, I can't see any reason that we queue a redraw in here.
With the split into surface actors, we don't have an easy place
we can use to queue a redraw, and since it's unnecessary, we can
just drop it on the floor.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
Compositors haven't been able to manage more than one screen for
quite a while. Merge MetaCompScreen into MetaCompositor, and update
the API to match.
We still keep MetaScreen in the public compositor API for compatibility
purposes.
We previously separated out MetaDisplay and MetaScreen. mutter
would only manage one screen, but we still kept a list of screens
for simplicity.
With Wayland support, we no longer care about the ability to
manage more than one screen at a time. Remove this by killing
the list of screens, in favor of having just one MetaScreen
in MetaDisplay.
We also kill off active_screen at the same time, since it's
not necessary anymore.
A future cleanup should merge MetaDisplay and MetaScreen. To avoid
breaking API, we should probably keep MetaScreen around as a dummy
type.
I'm a bit tired of hearing about this when I launch mutter-wayland
nested. Ideally, this would be part of display server integration,
not GNOME integration, so we could simply not make the call when
nested, but oh well.
cogl_texture_get_components can be used on both X11 and Wayland
backends. Technically, the detection is different: we actually
check the actual RENDER format in the old code, while Cogl simply
assumes that any pixmap with a depth >= 32 is ARGB32. Since Cogl
already seems to be working with its internal checks, it makes
more sense to use Cogl's check rather than keeping our own.
is_argb32 can be called at any time, including times when we don't
have a texture. In that case, just assume we're ARGB32. The value
really shouldn't be important though.
When I refactored this out into a vfunc, I forgot to change the
code that interprets the result flags to actually respect the
new FRAME_SHAPE_CHANGED result flag.
Since we weren't ever clearing the frame bounds, this meant that
the "shadow clip" wasn't ever updated as a result. Since right now
all Wayland surfaces are considered ARGB32, we always clip shadows
under frames, and thus shadows had this weird "punch-out" from the
first frame shape.
While the ICCCM mandates the use of this, it's not necessary under
a composited environment from my understanding, and it's a flat
out no-op under XWayland.
Looking at the other rootless servers like Xwin/Xquartz, it seems
that they contain code for colormap emulation, but they're actually
never used -- a bug prevents the code from ever being called. Given
that it's been this way since 2003, I'm going to hazard a guess that
not many apps using colormaps. Kill them off.
display.c is getting a bit crowded. Move most of the handling
out to another file, events.c.
The long-term goal is to have generic event handling here, with
backend-specific handling for the types of windows and such.
Previously, a sequence like this would crash a client:
=> surface.attach(buffer)
=> buffer.destroy()
The correct behavior is to wait until we release the buffer before
destroying it.
=> surface.attach(buffer)
=> surface.attach(buffer2)
<= buffer.release()
=> buffer.destroy()
The protocol upstream says that "the surface contents are undefined"
in a case like this. Personally, I think that this is broken behavior
and no client should ever do it, so I explicitly killed any client
that tried to do this.
But unfortunately, as we're all well aware, XWayland does this.
Rather than wait for XWayland to be fixed, let's just allow this.
Technically, since we always copy SHM buffers into GL textures, we
could release the buffer as soon as the Cogl texture is made.
Since we do this copy, the semantics we apply are that the texture is
"frozen" in time until another newer buffer is attached. For simple
clients that simply abort on exit and don't wait for the buffer event
anyhow, this has the added bonus that we'll get nice destroy animations.
If we have a CLICKING grab op we still need to send events to xwayland
so that we get them back for gtk+ to process thus we can't steer
wayland input focus away from it.
https://bugzilla.gnome.org/show_bug.cgi?id=726123
meta_wayland_seat_repick() can be called in various cases while mutter
has a GRAB_OP ongoing which means we could be sending wrong pointer
enter/leave events.
https://bugzilla.gnome.org/show_bug.cgi?id=726123
This ensures that we send the proper leave and enter events to wayland
clients.
Particularly, this solves a bug in SSD xwayland windows where clicking
and dragging on the title bar to move the window only works on the odd
turn (unless the pointer moves away from the title bar between
tries). This happens because xwayland gets a button press but doesn't
see the release so when it gets the next button press it discards it
because its pointer button tracking logic says that the button is
already pressed. Sending the proper wayland pointer leave event fixes
it since wayland clients must forget about button state at that point.
https://bugzilla.gnome.org/show_bug.cgi?id=726123
At one point, it was supported to run mutter without a compositor,
but we don't allow that any longer. A lot of code already assumes
display->compositor exists and doesn't check for a NULL pointer,
so just kill the rest of the checks.
This is specifically about managing X11 windows, not necessarily
running as an X11 compositor. By that I mean that this code is
still used for XWayland windows, and event handling is still and
modesetting / monitor management is still in core/.
This is also a fairly conservative move. We don't move anything
like screen.c or bell.c in here, even though those are really
only for X11 clients.
This is fairly simple and basic for now, with just skip_taskbar /
skip_pager, but eventually a lot of "WM policy" like this, including
move-resize, will be in subclasses for each individual surface.
In particular we need to know about all key events to keep the xkb
state reliable even if the event is then consumed by a global shortcut
or grab and never reaches any wayland client.
We also need to keep track of all pressed keys at all times so that we
can send an updated set or pressed keys to the focused client when a
grab ends.
https://bugzilla.gnome.org/show_bug.cgi?id=722847
Any given clutter event carries the modifier state as it was before it
occured but, for the wayland modifiers event, we want the state
including the current event.
To fix this, we'll keep our xkb_state instance around instead of the
serialized mods.
https://bugzilla.gnome.org/show_bug.cgi?id=722847
Currently touch events are ignored in the core event handler,
and hence dealt with within GDK. If those touch events were
emulating pointer events, GDK would attempt to convert back
those events to pointer events as the frame GdkWindow doesn't
have the GDK_TOUCH_MASK set.
This results in XI_TouchBegin events being initially processed
by GDK, converted to button events, and triggering a grab op
that subverts touch events into pointer events, so the touch
is never ever seen again by GDK. This leaves GDK in an
inconsistent internal state wrt pointer grabs, so future
pointer-emulating touches will refer to the same window forever.
Fix this by handling touch events minimally, just enough to
convert XI_TouchBegin to GDK_BUTTON_PRESS within mutter, so GDK
is bypassed for every touch event just like it is for pointer
events. This, and the XIGrabDevice() that keeps coercing pointer
events when the grab operation starts, are enough to fix window
drag and drop on touch devices.
https://bugzilla.gnome.org/show_bug.cgi?id=723552
We try to exempt CSD windows from being forced fullscreen if they are
undecorated and the size of the screen; however, we also catch almost
all windows that *do* need to be forced fullscreen in this check, since
they also have decorations turned off.
Identify actual CSD windows by checking whether _GTK_FRAME_EXTENTS is set -
GTK+ will always set this on CSD windows even if they have no invisible
borders or shadows at the current time.
We explicitly turn off the legacy-fullscreen check for native wayland windows
so we don't start legacy-fullscreening them if the new
meta_window_is_client_decorated() is later made more accurate.
https://bugzilla.gnome.org/show_bug.cgi?id=723029
We try to exempt CSD windows from being forced fullscreen if they are
undecorated and the size of the screen; however, we also catch almost
all windows that *do* need to be forced fullscreen in this check, since
they also have decorations turned off.
Identify actual CSD windows by checking whether _GTK_FRAME_EXTENTS is set -
GTK+ will always set this on CSD windows even if they have no invisible
borders or shadows at the current time.
https://bugzilla.gnome.org/show_bug.cgi?id=723029
The user_rect represents the unconstrainted window size, and lots
of code in mutter assumes it can resize to the user_rect at any
time. If we wait for an attach to ACK and save the user rect, we'll
see lots of flickering as code is resizing to the old user_rect
at any time.
Make it a compile-time flag rather than a run-time flag, because
practically any time you're going to be debugging event spewing,
you're going to have to recompile anyway. Remove the WITH_VERBOSE_MODE
checks, too.
Which is used for Wayland popup grabs.
The issue here is that we don't want the code that raises or focuses
windows based on mouse ops to run while a client has a grab.
We still keep the "old" grab infrastructure in place for now, but
ideally we'd replace it eventually with a better grab-op infrastructure.
Clutter's input device initial position defaults to (-1, -1) on most
backends but for the evdev backend we changed it to be inside the
stage to prevent the pointer from wandering outside the stage until it
first enters, after which our constraining callback won't let it go
out.
This makes us be in sync with the real position from the start.
_SVID_SOURCE has been deprecated in newer versions of glibc breaking
-WError; the recommended replacement of _DEFAULT_SOURCE is fairly
new, so switch to _XOPEN_SOURCE instead.
_SVID_SOURCE has been deprecated in newer versions of glibc breaking
-WError; the recommended replacement of _DEFAULT_SOURCE is fairly
new, so switch to _XOPEN_SOURCE instead.
The "original coordinates" passed into meta_window_place() were the
coordinates of the client rectangle not the frame rectangle. When
meta_window_place() didn't place because the window was manually
positioned (e.g., 'xterm -geometry +x+y') that resulted in a window
being offset by the frame dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=724049
Since the introduction of frame sync in GTK+, updates to titlebar font and
colors haven't been working because GTK+ counts on the frame clock to
do style updates, and the frame clock doesn't run for an unmapped
GdkWindow. (It's possible that GtkStyleContext changes subsequent to
the introduction of the frame clock were also needed to fully break
things.)
We actually need to map the MetaFrames GdkWindow and let the
compositor code send out the frame sync messages in order to pick up
style changes.
Hopefully no bad side effects will occur from this - we make the window
override-redirect, 1x1, and outside the bounds of the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=725751
The "original coordinates" passed into meta_window_place() were the
coordinates of the client rectangle not the frame rectangle. When
meta_window_place() didn't place because the window was manually
positioned (e.g., 'xterm -geometry +x+y') that resulted in a window
being offset by the frame dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=724049
Since the introduction of frame sync in GTK+, updates to titlebar font and
colors haven't been working because GTK+ counts on the frame clock to
do style updates, and the frame clock doesn't run for an unmapped
GdkWindow. (It's possible that GtkStyleContext changes subsequent to
the introduction of the frame clock were also needed to fully break
things.)
We actually need to map the MetaFrames GdkWindow and let the
compositor code send out the frame sync messages in order to pick up
style changes.
Hopefully no bad side effects will occur from this - we make the window
override-redirect, 1x1, and outside the bounds of the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=725751
We need to resolve the keycode from the keysym again since the keycode
might have changed if there was a keymap switch between the grab and
the ungrab.
Before starting to use display_get_keybinding() we could compare
MetaKeyBinding.modifiers with MetaKeyCombo.modifiers directly. Now, we
need to resolve the virtual modifiers to match with the mask.
We need to resolve the keycode from the keysym again since the keycode
might have changed if there was a keymap switch between the grab and
the ungrab.
Before starting to use display_get_keybinding() we could compare
MetaKeyBinding.modifiers with MetaKeyCombo.modifiers directly. Now, we
need to resolve the virtual modifiers to match with the mask.
This allows us to look for a match with an O(1) search instead of O(n)
which is nice, particularly when running as a wayland compositor in
which case we have to do this search for every key press event (as
opposed to only when our passive grab triggers in the X compositor
case).
We actually need two hash tables. On one we keep all the keybindings
themselves which allows us to add external grabs without constantly
re-allocating the array we were using previously.
The other hash table is an index of the keybindings in the first table
by their keycodes and mask which is how we actually match the key
press events. This second table thus needs to be rebuilt when the
keymap changes since keycodes have to be resolved then but since we're
only keeping pointers to the first table it's a fast operation.
https://bugzilla.gnome.org/show_bug.cgi?id=725588
Instead of looping over an array of keybindings to find the correct
binding, just use display_get_keybinding().
In the next commit, we'll change the array to be a hash map, so this
helps the patch be cleaner.
https://bugzilla.gnome.org/show_bug.cgi?id=725588
This allows us to look for a match with an O(1) search instead of O(n)
which is nice, particularly when running as a wayland compositor in
which case we have to do this search for every key press event (as
opposed to only when our passive grab triggers in the X compositor
case).
We actually need two hash tables. On one we keep all the keybindings
themselves which allows us to add external grabs without constantly
re-allocating the array we were using previously.
The other hash table is an index of the keybindings in the first table
by their keycodes and mask which is how we actually match the key
press events. This second table thus needs to be rebuilt when the
keymap changes since keycodes have to be resolved then but since we're
only keeping pointers to the first table it's a fast operation.
https://bugzilla.gnome.org/show_bug.cgi?id=725588
Instead of looping over an array of keybindings to find the correct
binding, just use display_get_keybinding().
In the next commit, we'll change the array to be a hash map, so this
helps the patch be cleaner.
https://bugzilla.gnome.org/show_bug.cgi?id=725588
Creating a new cogl texture may fail, in which case the intent to
free it will crash. While something is clearly wrong (insanely
large window, oom, ...), crashing the WM is harsh and we should
try to avoid it if at all possible, so carry on.
https://bugzilla.gnome.org/show_bug.cgi?id=722266
Do to a bad mixup, the surface listener was never actually fired.
This was accidentally fixed as part of a refactoring in a27fb19,
but the surface listener was broken, and we started crashing. To
fix, just remove the surface listener, as we've mostly been testing
without it.
This is not needed since the instance is being destroyed and in fact
actively harmful when code called from other handlers disconnects us
for other reasons. In that case we might crash because the
disconnection doesn't prevent other handlers from running in the
current signal emission and thus we try to remove ourselves from an
empty list.
Creating a new cogl texture may fail, in which case the intent to
free it will crash. While something is clearly wrong (insanely
large window, oom, ...), crashing the WM is harsh and we should
try to avoid it if at all possible, so carry on.
https://bugzilla.gnome.org/show_bug.cgi?id=722266
This changes the user data of all surface extensions resources to be
the MetaWaylandSurface instead of the MetaWaylandSurfaceExtension,
which means that we no longer need all these pesky wl_container_ofs
in implementations.
Don't set the surface actor to a new buffer if it's becoming unmapped.
This is also technically wrong since we'll send out the release event,
but oh well.
We should probably decouple MetaWaylandBuffer from the CoglTexture
at some point, so we can send out releases on-demand.
We don't want to match the keysym so that e.g. an accelerator
specified as "<Super>a" works if the current keymap has a keysym other
than 'a' for that keycode which means that the accelerator would
become inaccessible in a non-latin keymap.
This is inconvenient for users that often switch keyboard layouts, or
even have different layouts in different windows, since they expect
system-level keybindings to not be affected by the current layout.
https://bugzilla.gnome.org/show_bug.cgi?id=678001
We don't want to match the keysym so that e.g. an accelerator
specified as "<Super>a" works if the current keymap has a keysym other
than 'a' for that keycode which means that the accelerator would
become inaccessible in a non-latin keymap.
This is inconvenient for users that often switch keyboard layouts, or
even have different layouts in different windows, since they expect
system-level keybindings to not be affected by the current layout.
https://bugzilla.gnome.org/show_bug.cgi?id=678001
The only events we handle as XIEvents are FocusIn/Out, Enter and
Leave. Motion, ButtonPress/Release, KeyPress/Release are handled
through clutter instead.
Among other things, this means we don't need to fake motion compression
by peeking over gdk event queue...
All WM events (passive button grabs and passive keyboard grabs)
are handled through clutter now, so we must make sure we spoof
them even if they happen on frames (because that's where we
grab on)
Weirdly, clutter stopped segfaulting when we call clutter_x11 methods
and the backend is not right, but this is correct anyway, and
probably fixes some BadDrawable errors in mutter-wayland on x11,
caused by mixing windows of the outer X and windows of Xwayland.
Mouse event handling was duplicated, resulting in weird interactions
if clutter was allowed to see certain events (for example under
wayland, where it gets all events). Because now clutter sees all
X events, even when running as an x11 compositor, we can handle
everything using the clutter variants.
At the same time, rewrite a little the passive button grab code,
to make it clear what is being matched on what and why.
meta_ui_window_is_widget() returns FALSE for frame windows, so we
must filter those explicitly (by letting the event go to gtk
and from there to MetaFrames). Also, for proper gtk widgets
(window menus) we want to let gtk see all events, including
keyboard, otherwise we break keynav in the window menu.
This means that having a window menu open disables keybindings
(because the event doesn't run through clutter)
We must spoof events to clutter even if they are associated
with a MetaWindow, because keyboard events are always associated
with one (the focus window), and we must process keybindings
for window togheter with the global ones if they include Super,
because we're not going to see them again.
... and individually. It turns out that updating the opaque region
was causing the shape region to be updated, which was causing a new
shape mask to be generated and uploaded to the GPU. Considering
GTK+ regenerates the opaque region on pretty much any focus change,
this is not good.
For decorated windows, we don't want to apply any input
shape, because the frame is always rectangular and eats
all the input.
The real check is in meta-window-actor, where we consider
if we need to apply the bounding shape and the input shape
(or the intersection of the two) to the surface-actor,
but as an optimization we avoid querying the server in
meta-window.
Additionally, for undecorated windows, the "has input shape"
check is wrong if the window has a bounding shape but not an
input shape.
... and individually. It turns out that updating the opaque region
was causing the shape region to be updated, which was causing a new
shape mask to be generated and uploaded to the GPU. Considering
GTK+ regenerates the opaque region on pretty much any focus change,
this is not good.
The handler pointer is dangling in MetaKeyBinding until
rebuild_key_binding_table() is run, so we can't dereference it.
Because we only need the flags at ungrab time, store a copy
in the MetaKeyBinding structure.
https://bugzilla.gnome.org/show_bug.cgi?id=724402
The handler pointer is dangling in MetaKeyBinding until
rebuild_key_binding_table() is run, so we can't dereference it.
Because we only need the flags at ungrab time, store a copy
in the MetaKeyBinding structure.
https://bugzilla.gnome.org/show_bug.cgi?id=724402
At some point meta_window_actor_cull_out stopped calling
meta_cullable_cull_out_children which caused the unobscured region
to never be set for the stex.
https://bugzilla.gnome.org/show_bug.cgi?id=725216
For decorated windows, we don't want to apply any input
shape, because the frame is always rectangular and eats
all the input.
The real check is in meta-window-actor, where we consider
if we need to apply the bounding shape and the input shape
(or the intersection of the two) to the surface-actor,
but as an optimization we avoid querying the server in
meta-window.
Additionally, for undecorated windows, the "has input shape"
check is wrong if the window has a bounding shape but not an
input shape.
We need a MetaWaylandSurface to build a MetaSurfaceActor, but
we don't have one until we get the set_window_xid() call from
XWayland. On the other hand, plugins expect to see the window
actor right from when the window is created, so we need this
empty state.
Based on a patch by Jasper St. Pierre.
Turns out we only ever need to freeze/thaw whole windows, not
surfaces or subsurfaces.
This will allow removing the surface actor without losing
the count.
This time, to make way for MetaSurfaceActorEmpty. This also fixes
destroy effects as a side effect. It still has issues if we try
to re-assign an actor that's already toplevel (e.g. somebody
re-popping up a menu that's already being destroyed), but this
will be fixed soon.
The idea here is that MetaWindowActor will do the unparenting of
the surface actor when it itself is destroyed. To prevent bad issues
with picking, we only make the surface actor reactive when it's
toplevel.
It triggers too often, making G_DEBUG=fatal-warnings quite useless.
Owen is going to rewrite this code sometime in the near future, so
I'm just gonna kill this warning for now.
If the last reference of a MetaIdleMonitor is held by the caller, it may
happen that the last reference is lost when calling the GDestroyNotify,
if this happens when the watched DBus name vanishes, the object (and the
watches hashtable) are destroyed while manipulating the watches hashtable,
so bad things may happen then.
Fix this by wrapping the operation by a ref/unref pair, so the object would
be destroyed after operating on the hashtable.
https://bugzilla.gnome.org/show_bug.cgi?id=724969
gnome-shell has some complex tracking to set the X input focus
correctly, assuming various things about how the stage is set up in X11.
For instance, it assumes that all actors that get key focus are
gnome-shell Chrome actors that will get events through the stage, so
when one of them is focused, it will try to set the focus back to the
stage.
In Wayland, windows are considered chrome actors that will get key
events through the stage, so this only has the result of unfocusing any
windows that have just received key focus.
We should probably move this input focus moving to mutter instead of
gnome-shell so we can better use mutter's internal state and heuristics.
If the last reference of a MetaIdleMonitor is held by the caller, it may
happen that the last reference is lost when calling the GDestroyNotify,
if this happens when the watched DBus name vanishes, the object (and the
watches hashtable) are destroyed while manipulating the watches hashtable,
so bad things may happen then.
Fix this by wrapping the operation by a ref/unref pair, so the object would
be destroyed after operating on the hashtable.
https://bugzilla.gnome.org/show_bug.cgi?id=724969
We cannot intersect the the complete volume with the unobscured bounds
because it does not include the shadows. So just intersect it with the
windows's shape bounds and union it with the shadow bounds.
This also matches what the comment in the code says:
"We could compute an full clip region as we do for the window texture,
but the shadow is relatively cheap to draw, and a little more complex to clip,
so we just catch the case where the shadow is completely obscured
and doesn't need to be drawn at all."
We cannot intersect the the complete volume with the unobscured bounds
because it does not include the shadows. So just intersect it with the
windows's shape bounds and union it with the shadow bounds.
This also matches what the comment in the code says:
"We could compute an full clip region as we do for the window texture,
but the shadow is relatively cheap to draw, and a little more complex to clip,
so we just catch the case where the shadow is completely obscured
and doesn't need to be drawn at all."
It turns out XKB has keysyms for these for no real reason, and I
was hitting those instead of the <Primary><Alt>F1 path. This is
ridiculous, but key, so is the entirety of XKB.
This took an embarassingly long time to figure out and debug.
The rendering logic before was somewhat complex. We had three independent
cases to take into account when doing rendering:
* X11 compositor. In this case, we're a traditional X11 compositor,
not a Wayland compositor. We use XCompositeNameWindowPixmap to get
the backing pixmap for the window, and deal with the COMPOSITE
extension messiness.
In this case, meta_is_wayland_compositor() is FALSE.
* Wayland clients. In this case, we're a Wayland compositor managing
Wayland surfaces. The rendering for this is fairly straightforward,
as Cogl handles most of the complexity with EGL and SHM buffers...
Wayland clients give us the input and opaque regions through
wl_surface.
In this case, meta_is_wayland_compositor() is TRUE and
priv->window->client_type == META_WINDOW_CLIENT_TYPE_WAYLAND.
* XWayland clients. In this case, we're a Wayland compositor, like
above, and XWayland hands us Wayland surfaces. XWayland handles
the COMPOSITE extension messiness for us, and hands us a buffer
like any other Wayland client. We have to fetch the input and
opaque regions from the X11 window ourselves.
In this case, meta_is_wayland_compositor() is TRUE and
priv->window->client_type == META_WINDOW_CLIENT_TYPE_X11.
We now split the rendering logic into two subclasses, which are:
* MetaSurfaceActorX11, which handles the X11 compositor case, in that
it uses XCompositeNameWindowPixmap to get the backing pixmap, and
deal with all the COMPOSITE extension messiness.
* MetaSurfaceActorWayland, which handles the Wayland compositor case
for both native Wayland clients and XWayland clients. XWayland handles
COMPOSITE for us, and handles pushing a surface over through the
xf86-video-wayland DDX.
Frame sync is still in MetaWindowActor, as it needs to work for both the
X11 compositor and XWayland client cases. When Wayland's video display
protocol lands, this will need to be significantly overhauled, as it would
have to work for any wl_surface, including subsurfaces, so we would need
surface-level discretion.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
It's mostly equivalent to the case where we've already detached
the pixmap, *except* for the x11_size_changed case. We can simply
detach the pixmap at the time the window changes size, though.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
We guarantee ourselves that a valid pixmap will appear any time
that the window is painted. The window actor will be scheduled
for a repaint if it's added / removed from the scene graph, like
during construction, if the size changes, or if we receive damage,
which are the existing use cases where this function is called.
So, I can't see any reason that we queue a redraw in here.
With the split into surface actors, we don't have an easy place
we can use to queue a redraw, and since it's unnecessary, we can
just drop it on the floor.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
If the client destroys the pointer resource, we shouldn't unfocus the
surface, and we should regrab it when the client gets the pointer
resource again.
This also fixes a crash at surface destruction because of the unchecked
wl_link_remove that will happen on both pointer and surface destroy.
We can never have a window actor that represents either the X root
window or the stage window, so it doesn't make sense to bail out
early in case we do.
I'd imagine that this came from a much earlier version of the code
where the compositor was much separate and had its own MapNotify
handling.
This reverts commit 283a81eac0.
This can't be done yet, as it will crash when we try to do a destroy
effect from a plugin. The surface actor needs to outlive the surface
in this case.
Though, the unparenting happening is wrong anyway for a destroy effect.
We need to figure out a sane way of doing this unparenting only after
all effects have finished.
As resource destruction can happen in any order at shutdown, we
need to be flexible here. A client disconnecting without cleaning
up all its resources should not assert fail.
Since the unredirected window MetaWindowActor is stacked on top, it
will naturally get culled out of the process, so we can remove the
special casing here. Unfortunately, with the way that the code is
currently structured, it's too difficult to actually prevent setting
the clip / visible regions if the window is redirected, so just let
those be set for unredirected windows for now.
The input region was set on the shaped texture, but the shaped texture
was never picked properly, as it was never set to be reactive. Move the
pick implementation and reactivity to the MetaSurfaceActor, and update
the code everywhere else to expect a MetaSurfaceActor.
I implemented pinging, but never actually enabled the feature
properly on Wayland surfaces by setting the net_wm_ping hint to
TRUE, causing the fallback path to always be hit.
Rename net_wm_ping to can_ping so it doesn't take on an
implementation-specific meaning, and set it for all Wayland windows.
I tested this with meta_window_get_input_rect and decided to change
it at the last minute. Turns out meta_window_get_rect is unlike all
the others. Just access window->rect directly instead.
Now that we call set_custom_frame_extents, the frame rect corresponds
to the "visible window geometry" used for constrainment, while the
x/y fields in get_xdg_popup instead are relative to the surface.
Something noticed on code inspection. If we have a popup grab,
it will always return FALSE. The code here clearly meant to continue
if we had an existing popup grab from an existing client.
Both the pointer/keyboard resource and surface resource can be destroyed
at any point in the destruction process, so we need to have destroy
listeners on both. To make the code easier to follow, rename ->focus
to ->focus_surface at the same time, and rearrange the code so that
the two of them are always grouped together.
To prevent the MetaSurfaceActor from being destroyed, we normally
unparent it before we unmanage the window. However, this doesn't
work for XWayland windows, which we unmanage when we get UnmapNotify
or DestroyNotify, not when we get the wl_surface_destroy.
To solve this, add an early hook in meta_window_unmanage that
unparents the surface actor if we have one. At the same time, clean
up the destruction code to remove old comments and assumptions about
how wl_shell behaves.
It doesn't work now that we set the pivot point. This breaks the
maximize effect, but it fixes the destroy effect. The maximize effect
looks bad anyway, so it's not too important to me.
Switching meta/util.h to gi18n.h was wrong, mutter is a library
and needs gi18n-lib.h, but that cannot be included from a public
header (since it depends on config.h or command line options),
so split util.h into a public and a private part.
https://bugzilla.gnome.org/show_bug.cgi?id=707897
Conflicts:
src/compositor/compositor.c
src/meta/util.h
This was a bad idea, as ping/pong has moved to a client-specific
request/event pair, rather than a surface-specific one. Revert
the changes we made here and correct the code to make up for it.
This reverts commit aa3643cdde.
If we fail to find the IDLETIME counter, then the alarm variable will be
uninitialised. Most code paths are careful to check this before
submitting XSync calls, but there is one check missing.
https://bugzilla.gnome.org/show_bug.cgi?id=724364
In order for the compositor to properly determine whether a client
is an X11 client or not, we need to wait until XWayland calls
set_window_id to mark the surface as an XWayland client. To prevent
the compositor from getting tripped up over this, make sure that
the window has been fully initialized by the time we call
meta_compositor_add_window.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
In order for the compositor to properly determine whether a client
is an X11 client or not, we need to wait until XWayland calls
set_window_id to mark the surface as an XWayland client. To prevent
the compositor from getting tripped up over this, make sure that
the window has been fully initialized by the time we call
meta_compositor_add_window.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
Traditionally, WMs unmap windows when minimizing them, and map them
when restoring them or wanting to show them for other reasons, like
upon creation.
However, as metacity morphed into mutter, we optionally chose to keep
windows mapped for the lifetime of the window under the user option
"live-window-previews", which makes the code keep windows mapped so it
can show window preview for minimized windows in other places, like
Alt-Tab and Expose.
I removed this preference two years ago mechanically, by removing all
the if statements, but never went through and cleaned up the code so
that windows are simply mapped for the lifetime of the window -- the
"architecture" of the old code that maps and unmaps on show/hide was
still there.
Remove this now.
The one case we still need to be careful of is shaded windows, in which
we do still unmap the client window. In the future, we might want to
show previews of shaded windows in the overview and Alt-Tab. In that
we'd also keep shaded windows mapped, and could remove all unmap logic,
but we'd need a more complex method of showing the shaded titlebar, such
as using a different actor.
At the same time, simplify the compositor interface by removing
meta_compositor_window_[un]mapped API, and instead adding/removing the
window on-demand.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
Traditionally, WMs unmap windows when minimizing them, and map them
when restoring them or wanting to show them for other reasons, like
upon creation.
However, as metacity morphed into mutter, we optionally chose to keep
windows mapped for the lifetime of the window under the user option
"live-window-previews", which makes the code keep windows mapped so it
can show window preview for minimized windows in other places, like
Alt-Tab and Expose.
I removed this preference two years ago mechanically, by removing all
the if statements, but never went through and cleaned up the code so
that windows are simply mapped for the lifetime of the window -- the
"architecture" of the old code that maps and unmaps on show/hide was
still there.
Remove this now.
The one case we still need to be careful of is shaded windows, in which
we do still unmap the client window. In the future, we might want to
show previews of shaded windows in the overview and Alt-Tab. In that
we'd also keep shaded windows mapped, and could remove all unmap logic,
but we'd need a more complex method of showing the shaded titlebar, such
as using a different actor.
At the same time, simplify the compositor interface by removing
meta_compositor_window_[un]mapped API, and instead adding/removing the
window on-demand.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
If we fail to find the IDLETIME counter, then the alarm variable will be
uninitialised. Most code paths are careful to check this before
submitting XSync calls, but there is one check missing.
https://bugzilla.gnome.org/show_bug.cgi?id=724364
Prior to the DisplayConfig merge, we would set _NET_WM_FULLSCREEN_MONITORS
to (unsigned)-1 when unset. After that, we would have invalid
reads inside meta_screen_monitor_index_to_xinerama_index() (called
with -1).
The way I read the specification, the proper way to indicate
that the window is back to fullscreen on all monitors is to
remove the property, so do that.
Also, add an assertion that meta_screne_monitor_index_to_xinerama_index()
is doing the right thing.
https://bugzilla.gnome.org/show_bug.cgi?id=724258
Prior to the DisplayConfig merge, we would set _NET_WM_FULLSCREEN_MONITORS
to (unsigned)-1 when unset. After that, we would have invalid
reads inside meta_screen_monitor_index_to_xinerama_index() (called
with -1).
The way I read the specification, the proper way to indicate
that the window is back to fullscreen on all monitors is to
remove the property, so do that.
Also, add an assertion that meta_screne_monitor_index_to_xinerama_index()
is doing the right thing.
https://bugzilla.gnome.org/show_bug.cgi?id=724258
We want to remove a bunch of auxilliary duties from the MetaWindowActor
and MetaSurfaceActor, including some details of how culling is done.
Move the unobscured region culling code to the MetaShapedTexture, which
helps the actor become "more independent".
https://bugzilla.gnome.org/show_bug.cgi?id=720631
When we traversed down to reset the culling state, previously we
would just skip any actors that wanted culling. In order to properly
reset the unobscured_region before painting, we need to traverse down
to these places as well. Do this by calling cull_out with NULL regions
for both arguments, and adapt existing cull_out implementations to
match.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
We want to remove a bunch of auxilliary duties from the MetaWindowActor
and MetaSurfaceActor, including some details of how culling is done.
Move the unobscured region culling code to the MetaShapedTexture, which
helps the actor become "more independent".
https://bugzilla.gnome.org/show_bug.cgi?id=720631
When we traversed down to reset the culling state, previously we
would just skip any actors that wanted culling. In order to properly
reset the unobscured_region before painting, we need to traverse down
to these places as well. Do this by calling cull_out with NULL regions
for both arguments, and adapt existing cull_out implementations to
match.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
It seems that this code is trying to transform from "surface coordinates"
(the size of texture that's being displayed) to "actor coordinates"
(the actor's allocation), but I can't find any place where the two are
different. As such, let's just go back to using "surface coordinates"
everywhere and see what breaks.
This is considered "undefined" by upstream. Right now GTK+ does this
a lot, so we shouldn't crash. Let's make them crash instead and send
them an error instead.
