The GetSystemMetrics() function returns wrong values for SM_CXSIZEFRAME,
SM_CYSIZEFRAME, SM_CXFIXEDFRAME and SM_CYFIXEDFRAME when built with Visual
Studio 2012 and 2013 (unless the XP compatibility setting for the
PlatformToolset entry is turned on), causing the window of Clutter programs
to automatically shrink to a point where they become unusable.
This patch uses AdjustWindowRectEx() for builds using Visual Studio 2012
and later, which deduces the required height and width of the Window
properly. Unfortunately we can't use this for the VS 2008/2010 builds as
they cause the Window to continually expand as the program is run.
https://bugzilla.gnome.org/show_bug.cgi?id=725873
We should use the Xkb API to query the direction of the key map,
depending on the group. To get a valid result we need to go over
the Unicode equivalents of the key symbols for each group, so we
should cache the result.
The code used to query and cache the key map direction is taken
from GDK.
https://bugzilla.gnome.org/show_bug.cgi?id=705779
We should set the direction on the PangoContext when creating a
PangoLayout based on a best effort between the contents of the text
itself and the text direction of the widget, in case that fails.
https://bugzilla.gnome.org/show_bug.cgi?id=705779
Currently clutter_device_manager_xi2_get_core_device always
does a round trip to query the client.
So avoid that by caching the client pointer and only update it when the
xi devices change.
https://bugzilla.gnome.org/show_bug.cgi?id=725561
ClutterInputDevice's default initial coordinates is (-1, -1) and since
they're updated from events in a relative way it means that the
pointer can go outside the stage right from the first event.
We usually let this up to higher layers to fix through the pointer
constraint callback but that doesn't work if the first event doesn't
put the pointer immediately inside the stage.
https://bugzilla.gnome.org/show_bug.cgi?id=725103
Doing so is unlikely to work reliably. Instead, switching the keymap
should be done at a time when no key is currently pressed down, but
let's leave that task to higher level code.
This allows us to remove key state tracking at yet another level in
the stack since higher level code likely already tracks this for other
purposes.
https://bugzilla.gnome.org/show_bug.cgi?id=725102
The kernel keyboard repeat functionality isn't configurable and
libinput rightfully ignores it.
This implements keyboard repeat in userspace allowing for consumers to
set the initial delay and repeat intervals.
https://bugzilla.gnome.org/show_bug.cgi?id=725102
The evdev backend has always been excluded from Clutter's API
stability guarantee though in an informal way. This commit makes it
explicit by forcing users to define CLUTTER_ENABLE_COMPOSITOR_API.
https://bugzilla.gnome.org/show_bug.cgi?id=725102
Instead of having its own evdev input device processing implementation,
make clutter's evdev backend use libinput to do input device processing
for it.
Two GObject parameters of ClutterInputDeviceEvdev (sysfs-path and
device-path) are removed as they are not used any more.
Before ClutterDeviceManagerEvdev had one virtual core keyboard and one
virtual core pointer device. These are now instead separated into seats,
which all have one virtual core keyboard and pointer device respectively.
The 'global' core keyboard and pointer device are the core keyboard and
pointer device of the first seat that is created.
A ClutterInputDeviceEvdev can, as before, both represent a real physical
device or a virtual device, but is now instead created either via
_clutter_input_device_evdev_new() for real devices, and
_clutter_input_device_new_virtual() for virtual devices.
XKB state and button state is moved to the seat structure and is thus
separated per seat. Seats are not a concept exposed outside of clutter's
evdev backend.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=720566
Due to the way add_device() invariably adds to the master/slave device
lists, while keeping ClutterInputDevices 1:1 with device IDs, it may
leave invalid pointers in the list if add_device() is called multiple
times for the same device ID. There are two situations where this may
happen:
1) If devices are disabled and later enabled: devices are added invariably
to the master/slave lists on constructed(), but then on XIDeviceEnabled
they'd get added yet again.
2) Racy cases where the ClutterDeviceManager is created around the same time
XIHierarchyEvents are sent. When getting the XIDeviceInfo on constructed(),
these devices may already appear as enabled, even though XIDeviceEnabled
is seen through XIHierarchyEvents processed in the event loop sortly after.
This last case can be seen when starting gnome-shell on a different tty,
and entering in the one it's been spawned on, clutter initialization
happens around the same time devices are added back because of the tty
switch, and multiple extra ClutterInputDevices are created.
https://bugzilla.gnome.org/show_bug.cgi?id=724971
Currently we where checking whether the damage_history list contains
more or equal then buffer_age entries. This is wrong because we prepend
our current clip to the list just before the check.
Fix that to check whether we have more entries instead of more or equal.
https://bugzilla.gnome.org/show_bug.cgi?id=724788
The documentation for the s and l components is incorrect; these have to
be percentage values and must have a '%' character right after the
number.
Based on a patch by: Pablo Pissanetzky <pablo@trickplay.com>
https://bugzilla.gnome.org/show_bug.cgi?id=662818
The internal delete_text() implementation takes a start and an end
position, whereas the public delete_chars() method takes a number of
characters to delete starting from the current cursor position.
The :unscaled-font-dpi property is used to override the existing
:font-dpi value when running on high DPI density displays; since it's a
write-only property we don't need to have a separate storage, nor we
need to choose between :font-dpi and :unscaled-font-dpi depending on
whether or not either has been set. If we select which one to use
between :font-dpi and :unscaled-font-dpi when computing the font
resolution, we end up breaking the code that relies on changing
:font-dpi directly on a per-Settings basis.
Like we do for the windowing surfaces, we should have a run time knob
(in the form of an environment variable) to allow changing the scaling
factor of the font resolution.
We need to provide an escape hatch to ClutterCanvas so that it's
possible to override the window-scaling-factor ClutterSetting. This is
going to be useful in the future in case the user has better knowledge
of the window scaling factor that is going to be used with a specific
set of ClutterCanvas contents (e.g. on different outputs or stages).
https://bugzilla.gnome.org/show_bug.cgi?id=705915
ClutterCanvas is a ClutterContent interface implementation; this means
that it can be created and modified regardless of whether it is
associated to a specific actor or a stage. For this reason, we cannot
walk the hierarchy and get the window scaling factor for high DPI
density displays out of the ClutterStage when we create the Cairo
surface that we will use to draw the canvas contents on.
We can use ClutterSettings:window-scaling-factor instead, since it's
what each ClutterStage will use anyway.
This will get slightly more complicated when we support per-output
window scaling factors (like on Wayland), but that will require changes
in the entire settings architecture anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=705915
If we get a change in the window scaling factor we want to resize the
backing store of each stage, so we use the notification on the
ClutterSettings:window-scaling-factor property to do so.
https://bugzilla.gnome.org/show_bug.cgi?id=705915
We want the settings object to handle setting and getting the
window scaling factor value, both through backend-specific settings and
through the CLUTTER_SCALE environment variable. This means turning the
ClutterSettings:window-scaling-factor property into a readwrite one,
instead of write-only, so that ClutterStage implementations will be able
to query the window scaling factor on construction.
https://bugzilla.gnome.org/show_bug.cgi?id=705915
We do some argument validation inside _clutter_stage_do_pick(), which is
the internal version of clutter_stage_get_actor_at_pos(), but we don't
do coordinate space validation, and instead we rely on call sites doing
the right thing.
We should, instead, remove the argument validation from the internal
function, which is pointless and against the coding practices, but do
coordinate space validation internally.
https://bugzilla.gnome.org/show_bug.cgi?id=722322