We started to report resource changes using prediction when an update
had been successfully committed. While at it, gamma changes were
reported too, but this was problematic, as gsd-color will listen for the
MonitorsChanged D-Bus signal and naively set the gamma again, even if it
didn't change. There aren't currently any actual use cases for being
told when gamma changes from a prediction, so just ignore it and just
report privacy screen changes.
This avoids a feedback loop between mutter and gsd-color.
Fixes: 81b28a1d97
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2531>
When we change the privacy screen, we added a result listener to the KMS
update object to notify the upper layer about the privacy screen state
change. This was slightly awkward as one might have changed the state
multiple times for a single update, thus it was necessary to remove any
old result listeners to an update before adding a new one.
Doing this will not be possible when updates are fully async and managed
by the KMS impl device.
To handle this, instead make the post-commit prediction notify about
changes that happens in response to a successfully committed update. We
already predicted the new privacy screen state, so the necessary change
was to plumb the actual change into a callback which emits the signal if
there actually was a privacy screen change.
This will then be communicated via the same signal listener that already
listens to the 'resources-changed' signal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2340>
The name had a bit conceptual conflicts with MetaKmsUpdate, as it shared
its namespace but had no relation to it. Fix this by renaming it
MetaKmsResourceChanges (and the corresponding META_KMS_UPDATE_CHANGE_*
to META_KMS_RESOURCE_CHANGE_*). The term "resource" is used since that's
already used in the signal, and the fact that the changes partly comes
from changes in the DRM resource as retrieved by drmModeGetResources.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2340>
The ImplDeviceAtomic converts the MetaKmsPlaneRotation back to the
concrete KMS value. The MetaMonitorTransform is always directly
converted to a MetaKmsPlaneRotation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2379>
Updating the PropTable has the side effect that the parse callback now
also gets called on hotplug but it is used to initialize data. The parse
callbacks are moved to the read_state functions which are aware if this
is an initializing call or just an update.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2379>
The property doesn't necessarily exist when using drivers that doesn't
support atomic mode setting, and the way it worked will break night
light and other gamma related features. This makes things use the gamma
length; if it is higher than 0, it definitely supports it one way or the
other, i.e. GAMMA_LUT with the atomic backend, and drmModeCrtcSetGamma()
with the legacy/simple backend.
Fixes: 364572b95c
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2287
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2435>
It doesn't depend on whether the CRTC is active or not, so always read
it. This is also useful to know whether a CRTC supports gamma, before it
is being turned on, without relying on the existance of properties.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2435>
The way device backends implement power saving differ, and power saving
needs to contain nothing incompatible in the same update. Make it
impossible to e.g. mode set, page flip, etc while entering power save by
not using MetaKmsUpdate's at all for this.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2159>
Since we cache already all the KMS parameters we care about let's check at
each device update if anything has really changed and only in such case
emit a resources-changed signal.
In this way we can also filter out the DRM parameters that when changed
don't require a full monitors rebuild.
Examples are the gamma settings or the privacy screen parameters, that
emits an udev "hotplug" event when changed, but we want to register those
only when we handle the changed property.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
Values may need to be processed and parsed in custom ways; make this
possible via the property table infrastructure using a callback.
Will be used for e.g. parsing rotation and formats.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
The gamma value pointers of the current_state are overwritten by the
calls to memdup causing a small leak. while the leak itself is small, it
can be triggered quite often from things like night light.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1020
If we did a mode set, the gamma may have been changed by the kernel, and
if we didn't also update the gamma in the same transaction, we have no
way to predict the current gamma ramp state. In this case, read the
gamma state directly from KMS.
This should be relatively harmless regarding the race conditions the
state prediction was meant to solve, as the worst case is we get none or
out of date gamma ramps; and since this is for when gamma ramps are not
updated at mode setting time, we'd get intermediate gamma state to begin
with, so it's not worse than what we currently do anyway.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/851https://gitlab.gnome.org/GNOME/mutter/merge_requests/840
We can't just update the state of the connector and CRTC from KMS since
it might contain too new updates, e.g. from a from a future hot plug. In
order to not add ad-hoc hot plug detection everywhere, predict the state
changes by looking inside the MetaKmsUpdate object, and let the hot-plug
state changes happen after the actual hot-plug event.
This fixes issues where connectors were discovered as disconnected while
doing a mode-set, meaning assumptions about the connectedness of
monitors elsewhere were broken until the hot plug event was processed.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/782https://gitlab.gnome.org/GNOME/mutter/merge_requests/826
drmModeGetCrtc may fail and return NULL. This will trigger when
meta_kms_crtc_update_state gets called from meta_kms_update_states_sync
after a GPU has been unplugged leading to a NULL pointer deref causing
a crash.
This commit fixes this by checking for NULL and clearing the current_state
when NULL is returned.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
Before this commit meta_kms_crtc_read_state was overwriting the
entire MetaKmsCrtcState struct stored in crtc->current_state including
the gamma (sub)struct.
This effectively zero-s the gamma struct each time before calling
read_gamma_state, setting the pointers where the previous gamma values
were stored to NULL without freeing the memory. Luckily this zero-ing
also sets gamma.size to 0, causing read_gamma_state to re-alloc the
arrays on each meta_kms_crtc_update_state call. But this does mean that
were leaking the old gamma arrays on each meta_kms_crtc_update_state call.
This commit fixes this by making meta_kms_crtc_read_state only overwrite
the other values in the MetaKmsCrtcState struct and leaving the gamma
sub-struct alone, this will make read_gamma_state correctly re-use the
gamma tables if the gamma table size is unchanged; or re-alloc them
(freeing the old ones) if the size has changed, fixing the memory leak.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
This commit introduces, and makes use of, a transactional API used for
setting up KMS state, later to be applied, potentially atomically. From
an API point of view, so is always the case, but in the current
implementation, it still uses legacy drmMode* API to apply the state
non-atomically.
The API consists of various buliding blocks:
* MetaKmsUpdate - a set of configuration changes, the higher level
handle for handing over configuration to the impl backend. It's used to
set mode, assign framebuffers to planes, queue page flips and set
connector properties.
* MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane.
Currently used to map a framebuffer to the primary plane of a CRTC. In
the legacy KMS implementation, the plane assignment is used to derive
the framebuffer used for mode setting and page flipping.
This also means various high level changes:
State, excluding configuring the cursor plane and creating/destroying
DRM framebuffer handles, are applied in the end of a clutter frame, in
one go. From an API point of view, this is done atomically, but as
mentioned, only the non-atomic implementation exists so far.
From MetaRendererNative's point of view, a page flip now initially
always succeeds; the handling of EBUSY errors are done asynchronously in
the MetaKmsImpl backend (still by retrying at refresh rate, but
postponing flip callbacks instead of manipulating the frame clock).
Handling of falling back to mode setting instead of page flipping is
notified after the fact by a more precise page flip feedback API.
EGLStream based page flipping relies on the impl backend not being
atomic, as the page flipping is done in the EGLStream backend (e.g.
nvidia driver). It uses a 'custom' page flip queueing method, keeping
the EGLStream logic inside meta-renderer-native.c.
Page flip handling is moved to meta-kms-impl-device.c from
meta-gpu-kms.c. It goes via an extra idle callback before reaching
meta-renderer-native.c to make sure callbacks are invoked outside of the
impl context.
While dummy power save page flipping is kept in meta-renderer-native.c, the
EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the
frame clock, actual page flip callbacks are postponed until all EBUSY retries
have either succeeded or failed due to some other error than EBUSY. This
effectively inhibits new frames to be drawn, meaning we won't stall waiting on
the file descriptor for pending page flips.
https://gitlab.gnome.org/GNOME/mutter/issues/548https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
Move reading state into a struct for MetaCrtcKms to use instead of
querying KMS itself. The state is fetched in the impl context, but
consists of only simple data types, so is made accessible publicly. As
of this, MetaCrtcKms construction does not involve any manual KMS
interaction outside of the MetaKms abstraction.
https://gitlab.gnome.org/GNOME/mutter/issues/548https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
Add MetaKmsCrtc to represent a CRTC on the associated device. Change
MetaCrtcKms to use the ones discovered by the KMS abstraction. It still
reads the resources handed over by MetaGpuKms, but eventually it will
use only MetaKmsCrtc.
MetaKmsCrtc is a type of object that is usable both from an impl task
and from outside. All the API exposed via the non-private header is
expected to be accessible from outside of the meta-kms namespace.
https://gitlab.gnome.org/GNOME/mutter/issues/548https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
