The ClutterDeformEffect sub-classes are effectively deforming the
texture target of an FBO, not the actor itself. Thus, we need to
use the FBO's size, and not the actor's allocated size, given that
the actor might be transformed prior to applying an effect.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2571
Since the FBO target might have a different size than the mere paint box
of the actor, we need API to get it out of the ClutterOffscreenEffect
private data structure and on to sub-classes.
Since we cannot add new API in a stable cycle, we need a private
function; we'll leave it there even when opening 1.7, since it's useful
for internal purposes.
Once upon a time, the land of Clutter had a stage singleton. It was
created automatically at initialization time and stayed around even
after the main loop was terminated. The singleton was content in
being all there was. There also was a global API to handle the
configuration of the stage singleton that would affect the behaviour
on other classes, signals and properties.
Then, an evil wizard came along and locked the stage singleton in his
black tower, and twisted it until it was possible to create new stages.
These new stages were pesky, and didn't have the same semantics of the
singleton: they didn't stay around when closed, or terminate the main
loop on delete events.
The evil wizard also started moving all the stage-related API from the
global context into class-specific methods.
Finally, the evil wizard cast a spell, and the stage singleton was
demoted to creation on demand - and until somebody called the
clutter_stage_get_default() function, the singleton remained in a limbo
of NULL pointers and undefined memory areas.
There was a last bit - literally - of information still held by the
global API; a tiny, little flag that disabled per-actor motion events.
The evil wizard added private accessors for it, and stored it inside the
stage private structure, in preparation for a deprecation that would
come in a future development cycle.
The evil wizard looked down upon the land of Clutter from the height of
his black tower; the lay of the land had been reshaped into a crucible
of potential, and the last dregs of the original force of creation were
either molted into new, useful shapes, or blasted away by the sheer fury
of his will.
All was good.
The clutter-id-pool.h header is private and not installed; yet, all the
clutter_id_pool_* symbols are public. Let's correct this oversight we've
been stringing along since forever.
Only allow access to the ClutterMainContext through the private
_clutter_context_get_default() function, so we can easily grep
it and remove the unwanted usage of the global context.
The shader stack held by ClutterMainContext should only be accessed
using functions, and not directly.
Since it's a stack, we can use stack-like operations: push, pop and
peek.
The _clutter_do_redraw() function should really be moved inside
ClutterStage, since all it does is calling private stage and
backend functions. This also allows us to change a long-standing
issue with a global fps counter for all stages, instead of a\
per-stage one.
Let's try and start reducing the size of ClutterActorPrivate by moving
some optional, out-of-band data from it to GObject data.
The ShaderData structure is a prime candidate for this migration: it
does not need to be inspected by the actor, and its relationship with an
actor is transient and optional.
By attaching it to the actor's instance through g_object_set_data() we
neatly tie its lifetime to the instance, and we don't have to care
cleaning it up in the finalize()/dispose() implementation of
ClutterActor itself.
If an atlas texture's last reference is held by the journal or by the
last flushed pipeline then if an atlas migration is started it can
cause a crash. This is because the atlas migration will cause a
journal flush and can sometimes change the current pipeline which
means that the texture would be destroyed during migration.
This patch adds an extra 'post_reorganize' callback to the existing
'reorganize' callback (which is now renamed to 'pre_reorganize'). The
pre_reorganize callback is now called before the atlas grabs a list of
the current textures instead of after so that it doesn't matter if the
journal flush destroys some of those textures. The pre_reorganize
callback for CoglAtlasTexture grabs a reference to all of the textures
so that they can not be destroyed when the migration changes the
pipeline. In the post_reorganize callback the reference is removed
again.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2538
In _clutter_actor_queue_redraw_with_clip it has a local variable to
mark when a new paint volume for the clip is created so that it can be
freed when the function returns. However the actual code to free the
paint volume went missing in 3b789490d2 so the variable did
nothing. This patch just adds the free back in.
When Cogl debugging is disabled then the 'waste' variable is not used
so it throws a compiler warning. This patch removes the variable and
the value is calculated directly as the parameter to COGL_NOTE.
Some code was doing pointer arithmetic on the return value from
cogl_buffer_map which is void* pointer. This is a GCC extension so we
should try to avoid it. This patch adds casts to guint8* where
appropriate.
Based on a patch by Fan, Chun-wei.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2561
About other assorted boneheadedness, the GType for GParamSpec is
called 'GParam'. Why? Who knows. I assume alcohol was involved,
but I honestly don't want to know.
This removes the last g-ir-scanner warning in Clutter.
This time, in Clutter core.
The ObjC standard library provides a type called 'id', which obviously
requires any library to either drop the useful shadowed variable warning
or stop using 'id' as a variable name.
Yes, it's almost unbearably stupid. Well, at least it's not 'index' in
string.h, or 'y2' in math.h.
Instead of directly banging GL to migrate textures the atlas now uses
the CoglFramebuffer API. It will use one of four approaches; it can
set up two FBOs and use _cogl_blit_framebuffer to copy between them;
it can use a single target fbo and then render the source texture to
the FBO using a Cogl draw call; it can use a single FBO and call
glCopyTexSubImage2D; or it can fallback to reading all of the texture
data back to system memory and uploading it again with a sub texture
update.
Previously GL calls were used directly because Cogl wasn't able to
create a framebuffer without a stencil and depth buffer. However there
is now an internal version of cogl_offscreen_new_to_texture which
takes a set of flags to disable the two buffers.
The code for blitting has now been moved into a separate file called
cogl-blit.c because it has become quite long and it may be useful
outside of the atlas at some point.
The 4 different methods have a fixed order of preference which is:
* Texture render between two FBOs
* glBlitFramebuffer
* glCopyTexSubImage2D
* glGetTexImage + glTexSubImage2D
Once a method is succesfully used it is tried first for all subsequent
blits. The default default can be overridden by setting the
environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the
following values:
* texture-render
* framebuffer
* copy-tex-sub-image
* get-tex-data
This adds a declaration for _cogl_is_texture_2d to the private header
so that it can be used in cogl-blit.c to determine if the target
texture is a simple 2D texture.
This adds a function called _cogl_texture_2d_copy_from_framebuffer
which is a simple wrapper around glCopyTexSubImage2D. It is currently
specific to the texture 2D backend.
This adds the _cogl_blit_framebuffer internal function which is a
wrapper around glBlitFramebuffer. The API is changed from the GL
version of the function to reflect the limitations provided by the
GL_ANGLE_framebuffer_blit extension (eg, no scaling or mirroring).
This extension is the GLES equivalent of the GL_EXT_framebuffer_blit
extension except that it has some extra restrictions. We need to check
for some extension that provides glBlitFramebuffer so that we can
unconditionally use ctx->drv.pf_glBlitFramebuffer in both GL and GLES
code. Even with the restrictions, the extension provides enough
features for what Cogl needs.
Previously when _cogl_atlas_texture_migrate_out_of_atlas is called it
would unreference the atlas texture's sub-texture before calling
_cogl_atlas_copy_rectangle. This would leave the atlas texture in an
inconsistent state during the copy. This doesn't normally matter but
if the copy ends up doing a render then the atlas texture may end up
being referenced. In particular it would cause problems if the texture
is left in a texture unit because then Cogl may try to call
get_gl_texture even though the texture isn't actually being used for
rendering. To fix this the sub texture is now unrefed after the copy
call instead.
The current framebuffer is now internally separated so that there can
be a different draw and read buffer. This is required to use the
GL_EXT_framebuffer_blit extension. The current draw and read buffers
are stored as a pair in a single stack so that pushing the draw and
read buffer is done simultaneously with the new
_cogl_push_framebuffers internal function. Calling
cogl_pop_framebuffer will restore both the draw and read buffer to the
previous state. The public cogl_push_framebuffer function is layered
on top of the new function so that it just pushes the same buffer for
both drawing and reading.
When flushing the framebuffer state, the cogl_framebuffer_flush_state
function now tackes a pointer to both the draw and the read
buffer. Anywhere that was just flushing the state for the current
framebuffer with _cogl_get_framebuffer now needs to call both
_cogl_get_draw_buffer and _cogl_get_read_buffer.
As noted in commit ce3f55292a an explict glFlush is needed for
both glBlitFramebuffer and glXCopySubBuffer.
_clutter_backend_glx_blit_sub_buffer was already doing an explicit
flush when using glBlitFramebuffer, so just do it unconditonally
and remove the call from clutter_stage_glx_redraw.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2558
Since we realize on creation we need to unrealize on destruction. This
makes sure that the ClutterStageWindow implementation can tear down any
resource set up during the realization phase.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2559
* nobled/wayland-fixes2:
wayland: fix shm buffers
wayland: set renderable type on dummy surface
wayland: check for egl extensions explicitly
wayland: fall back to shm buffers if drm fails
wayland: add shm buffer code
wayland: make buffer handling generic
wayland: really fix buffer format selection
wayland: fix pixel format
wayland: clean up buffer creation code
wayland: don't require the surfaceless extensions
wayland: check for API-specific surfaceless extension
wayland: fix GLES context creation
wayland: use EGL_NO_SURFACE
wayland: update to new api
wayland: fix connecting to default socket
fix ClutterContainer docs
The 'in_clone_paint' parameter of the private function
_clutter_actor_set_in_clone_paint() shadowed the private function
in_clone_paint(). Rename this parameter to 'is_in_clone_paint' to remove
a compiler warning.
If an actor was partially off of the stage, it would be clipped because
of the stage viewport. This produces problems if you use an offscreen
effect that relies on the entire actor being rendered (e.g. shadows).
Expand the viewport in this scenario so that the offscreen-rendering isn't
clipped.
This fixes http://bugzilla.clutter-project.org/show_bug.cgi?id=2550
Replace the opacity_parent with an opacity_override variable, to allow
direct overriding of the paint opacity and simplify this mechanism
somewhat.
This also required a new private flag, in_clone_paint, to maintain the
functionality of the public function clutter_actor_is_in_clone_paint()
When pushing a framebuffer it would previously push
COGL_INVALID_HANDLE to the top of the framebuffer stack so that when
it later calls cogl_set_framebuffer it will recognise that the
framebuffer is different and replace the top with the new
pointer. This isn't ideal because it breaks the code to flush the
journal because _cogl_framebuffer_flush_journal is called with the
value of the old pointer which is NULL. That function was checking for
a NULL pointer so it wouldn't actually flush. It also would mean that
if you pushed the same framebuffer twice we would end up dirtying
state unnecessarily. To fix this cogl_push_framebuffer now pushes a
reference to the current framebuffer instead.
After a dependent framebuffer is added to a framebuffer it was never
getting removed. Once the journal for a framebuffer is flushed we no
longer depend on any framebuffers so the list should be cleared. This
was causing leaks of offscreens and textures.
Unlike glXSwapBuffers, glXCopySubBuffer and glBlitFramebuffer don't
issue an implicit glFlush() so we have to flush ourselves if we want the
request to complete in finite amount of time since otherwise the driver
can batch the command indefinitely.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2551
This adds a note to clarify that cogl_matrix_multiply allows you to
multiply the @a matrix in-place, so @a can equal @result but @b can't
equal @result.
When uploading the layer matrix to GL it wasn't first calling
glActiveTextureMatrix to set the right texture unit for the
layer. This would end up setting the texture matrix on whatever layer
happened to be previously active. This happened to work for
test-cogl-multitexture presumably because it was coincidentally
setting the layer matrix on the last used layer.
As the prelude to deprecation of the function in 1.8, let's move the
implementation to an internal function, and use that instead of the
public facing one.
The GQueue that stores the global events queue is handled all over the
place:
• the structure is created in _clutter_backend_init_events();
• the queue is handled in clutter-event.c, clutter-stage.c and
clutter-backend.c;
• ClutterStage::dispose cleans up the events associated with
the stage being destroyed;
• the queue is destroyed in ClutterBackend::dispose.
Since we need to have access to it in different places we cannot put it
inside ClutterBackendPrivate, hence it should stay in ClutterMainContext;
but we should still manage it from just one place - preferably by the
ClutterEvent API only.
In the future, we want event translators to be the way to handle events
in backends. For this reason, they should be a part of the base abstract
ClutterBackend class, and not an X11-only concept.
Instead of asking all backends to do that for us, we can call
ClutterStageWindow::redraw ourselves by default.
This changeset fixes all backends to actually do the right thing, and
move the stage implementation redraw inside the ClutterStageWindow
implementation itself.
We need to *write* to the shared memory, not read from it.
cogl_texture_from_data() is read-only, it doesn't keep
the data in sync with the texture.
Instead, we have to call cogl_texture_get_data() ourselves
to sync manually.
eglGetProcAddress() returns non-null function pointers
whether or not they're actually supported by the driver,
since it can be used before any driver gets loaded. So
we have to check if the extensions are advertised first,
which requires having an initialized display, so we split
the display creation code into its own function.
The exception to extension-checking is EGL_MESA_drm_display,
since by definition it's needed before any display is even
created.
Use both the MappingNotify event and the XKB XkbMapNotify event, if
we're compiled with XKB support.
This change is also useful for making ClutterKeymapX11 an event
translator and let it deal with XKB events internally like we do for
stage and input events.
Based on a patch by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off by: Emmanuele Bassi <ebassi@linux.intel.com>
http://bugzilla.clutter-project.org/show_bug.cgi?id=2525
The redraw function might be called during destruction phase, when the
Stage state has not entirely been tore down. We need to be slightly more
resilient to that scenario.
The pipeline private data is accessed both from the private data set
on a CoglPipeline and the destroy notify function of a weak material
that the vertex buffer creates when it needs to override the wrap
mode. However when a CoglPipeline is destroyed, the CoglObject code
first removes all of the private data set on the object and then the
CoglPipeline code gets invoked to destroy all of the weak children. At
this point the vertex buffer's weak override destroy notify function
will get invoked and try to use the private data which has already
been freed causing a crash.
This patch instead adds a reference count to the pipeline private data
stuct so that we can avoid freeing it until both the private data on
the pipeline has been destroyed and all of the weak materials are
destroyed.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2544
In cogl_pipeline_set_layer_combine_constant it was comparing whether
the new color is the same as the old color using a memcmp on the
constant_color parameter. However the combine constant is stored in
the layer data as an array of four floats but the passed in color is a
CoglColor (which is currently an array of four guint8s). This was
causing valgrind errors and presumably also the check for setting the
same color twice would always fail.
This patch makes it do the conversion to a float array upfront before
the comparison.
Instead of just setting the input device pointer in the private event
data, it should also set the field in the event sub-types, so that
direct access to the structures still works.
cogl_matrix_project_points and cogl_matrix_transform_points had an
optimization for the common case where the stride parameters exactly
match the size of the corresponding structures. The code for both when
generated by gcc with -O2 on x86-64 use two registers to hold the
addresses of the input and output arrays. In the strided version these
pointers are incremented by adding the value of a register and in the
packed version they are incremented by adding an immediate value. I
think the difference in cost here would be negligible and it may even
be faster to add a register.
Also GCC appears to retain the loop counter in a register for the
strided version but in the packed version it can optimize it out and
directly use the input pointer as the counter. I think it would be
possible to reorder the code a bit to explicitly use the input pointer
as the counter if this were a problem.
Getting rid of the packed versions tidies up the code a bit and it
could potentially be faster if the code differences are small and we
get to avoid an extra conditional in cogl_matrix_transform_points.
Use a DeviceManager sub-class similar to the Win32 backend one, which
creates two InputDevices: a core pointer and a core keyboard.
The event translation code then uses these two devices to fill out the
.device field of the events.
Throw in enter/leave tracking, given that we need to update the device's
state.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2490
Implementation of event loop which works with GLib events, native OS X
events and Clutter events.
The event loop source code comes from the equivalent code in the Quartz
GDK backend from GTK+ 2.22.1, which is LGPL v2.1+ and thus compatible
with Clutter's licensing terms.
The code has been tested with libsoup, which did not work before together
with Clutter.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
http://bugzilla.clutter-project.org/show_bug.cgi?id=2490
Wayland visuals refer to a pixel's bytes in order from
most significant to least significant, while the
one-byte-per-component Cogl formats refer to the order
of increasing memory addresses, so converting between
the two depends on the system's endianness.
The height was being set from the ClutterGeometry in some parts
and from the stage in others. And since both callers of this
function pass &stage_wayland->allocation as the geometry anyway,
the stage argument isn't really even needed.
Since we need to find the stage from the X11 Window, it's better to use
a static hashmap that gets updated every time the ClutterStageX11:xwin
member is changed, instead of iterating over every stage handled by the
global ClutterStageManager singleton.
