vc4's implementation of `drmModeAtomicCommit` seems to require a few
milliseconds advanced notice or else it will miss the frame deadline.
That's too high for our deadline evasion threshold which is measured
in microseconds. Let's stop trying to use deadline timers on vc4 to
avoid this conflict without having to disable atomic KMS.
Suggested-by: Jonas Ådahl <jadahl@gmail.com>
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2953
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3279>
When CLUTTER_ENABLE_DEBUG is not defined, then CLUTTER_NOTE is defined
as an empty block of code. As a result of that, jitter_us is in that
situation unused, and a compiler warning about this unused variable
appears.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3275>
It's the 10 bit equivalent to NV12 and uses the same layout as P016, i.e.
16 bit components with the lowest 6 bits set to 0 (padding), allowing us
to use 16 bit "subformats".
Thus adding support is quite trivial as we can reuse the NV12 shader.
The format is widely supported in decoding and display hardware (on Intel
since Kaby Lake), as well as modern codecs (AV1, VP9, HEVC) and has
visible quality advantages over NV12.
Note that the additional colors are lost if composited to a 8 bit RGB
framebuffer. Switching between direct scanout and compositing can thus
cause quality differences. This is no new phenomena, however, as the
same is the case already for e.g. GL clients using 10 bit formats -
including video players.
Also note that P012 and P016 could trivially added as well - it's not
done here as they are uncommen and thus hard to test.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3244>
These shaders can be used for similar formats with other component
sizes since the values are represented as floats. So whether the source
value was stored in 8bit, 10bit or 16bit doesn't matter - the driver
will covert it for us.
Thus use a Weston-inspired, more general naming scheme.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3244>
They are needed as "subformats" for higher bit YCbCr formats, such as
P010, and we don't plan to use or expose them otherwise. Thus don't
implement any conversion or packing features.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3244>
Realizing a cursor will assume view related state objects are valid so
they can mark them as dirty. This assumption broke when there were a
scale changed that happened with multiple CRTCs, as we'd create view
object by view object as we realized the texture. Realizing the texture
would trigger a signal that had the handler assuming the validity of all
view objects, but if we only had gotten to the first, the second view
would not be there yet, thus we'd be doing a NULL pointer dereference.
Creating the view objects first, then handling the updating avoids this
problem by making the already done assumption valid on hotplugs.
The test case added tests exactly this series of events, and uses a
virtual monitor as a cheap trick to make the KMS CRTC based view the
first one, and an arbitrary view the second that previously had its view
object initialized too late.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3012
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3262>
The cursor surface is decided by the "current" surface; if that alone
changed (e.g. current surface was destroyed), we didn't update the
cursor, meaning it either got stuck, or got hidden if the client exited
completely.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3262>
It's hard to tell why turning on HDR mode failed without these log
messages. It could be missing support in the sink (EDID/DisplayID) or
missing support in the driver/display hardware (connector properties) or
just a failure turning it on.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3251>
Or else `glXQueryDrawable` will fail per the `GLX_EXT_buffer_age` spec:
> If querying GLX_BACK_BUFFER_AGE_EXT and <draw> is not bound to
> the calling thread's current context a GLXBadDrawable error is
> generated.
This mistake went unnoticed until `mtk_x11_error_trap_push` was introduced
(55e3b2e519) because for some reason it is incapable of trapping
`glXQueryDrawable`. Prior to that it seems
`cogl_onscreen_glx_get_buffer_age` would trap and so always returned zero.
This means we're reenabling clipped redraws on X11 here for the first
time in a long time.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3007
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3255>
Apart from a few edge cases we can avoid walking the tree and transform
to the ancestor coordinate space by multiplying the actor stage-relative
matrix with the inverse of the ancestor's stage-relative matrix.
Since the stage-relative matrices are cached, this reduces the number of
matrix multiplications we do in many situations considerably.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3259>
This used to be the HW device that triggered the crossing (i.e.
the mouse moving the pointer, etc), or the logical device if the
crossing event happened through other means than input device
events, e.g. relayouts.
The move to ClutterEvent constructors went a bit too far in
the simplifications and broke these expectations for input-generated
crossing events.
Make this event constructor behave like the other events: receive
a source device, and figure out the corresponding logical device from
there. Also pass the source device as it'd be expected, in the
input-induced crossing event generation paths.
Fixes: a8c62251f8 ("clutter: Port stage crossing events to new constructors")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2981
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3256>
When the actor gets a new "main" surface assigned, it adds the
new surface to the stack of surface actors, but forgets to remove
the old one.
This stale pointer in the array may cause invalid reads and crashes
after the assigned surface is disposed, e.g. when destroying the
MetaWindowActor tries to disconnect signals from all accounted
surface actors.
Fixes: 9a2c8b2592 ("window: Add suspend state")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3252>
Commit 3bfcb6d1 fixed the check for tiling via keybindings, but
ignored a subtle edge case when tiling with the pointer: The
monitor used for tiling is the monitor with the pointer, which
is not necessarily the one that contains the largest part of the
window.
That is, the correct monitor to check against depends on the
context where the function is called. We can either figure
it out automatically via the current window drag, or make it
a parameter.
The latter is clearer, because the callers already decide which
monitor to use for tiling anyway.
Fixes: 3bfcb6d1b9 ("window: Fix portrait orientation check for tiling")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3248>
These snippets are retrieved anew every time a window is resized. But
callers never modify them, they're effectively read-only so cache them
at the place of creation.
This is required to convince the pipeline hash that each reuse of the
same snippet really is the same snippet and so the pipeline is unchanged.
`CoglPipelineSnippetList` only does shallow comparisons and there's no
need right now to reimplement it as a deep comparison.
This eliminates the log message:
> Over 50 separate %s have been generated which is very unusual,
> so something is probably wrong!
which isn't actually a leak but more a warning about wasting time.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6958
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3224>
GInitable initialization is failable, currently, it may fail before error
traps are initialized, but error traps would be invariably deinitialized on
finalize() of the failed object. This results in an assert hit, on top of the
original failure to initialize the backend.
The libX11 error handlers are a pure client-side construct, and not a server
request, they just need XInitThreads() called to set up the library-side locks
protecting access to the global variable. This is done beforehand already at
meta_backend_x11_init(), so initialize the error traps around that time too.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3242>
Commit 9c3b130f67 changed slightly destruction order to handle use-after-free
situations, but missed a small new one introduced by the order change: The
MetaX11Display may schedule callbacks through MetaLaters, which depend on the
MetaCompositor, which is now freed before the MetaX11Display.
Since there is no winning move here, make the MetaX11Display aware of this
by avoiding to remove the callback if the MetaCompositor is already gone.
The MetaLaters infrastructure is already fully freed at this point (incl. the
data it contained), so this shouldn't be a leak.
Fixes: 9c3b130f67 ("display: Fix destruction order")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3247>
Use work area from the monitor that the window is currently on to
determine if tiling should be allowed.
Window tiling is disabled for monitors with portrait orientation, but
the work area we use to detect portrait orientation is taken from the
monitor that currently has the mouse pointer.
This works fine for edge tiling using the mouse, but this is broken when
using keybindings for window tiling because your mouse pointer could be
on a different monitor that has horizontal orientation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3199>
While adjusting the monitor layout of my docked laptop, mutter got a
segfault while attempting to dereference the frame_info struct. This
happened on gnome-shell 44.4-1.fc38.
cogl_onscreen_peek_head_frame_info() just forwards the call to
g_queue_peek_head() which returns NULL in the event that the queue is
empty. If finish_frame_result_feedback() is expected to always be called
with a non-empty queue there's still a bug somewhere, but regardless
this API can legitimately return NULL so it should be checked for prior
to dereferencing.
Fixes: 61801a713a ("onscreen/native: Avoid freezing the frame clock on failed cursor commits")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3229>
If we are making an update that only disables CRTCs, we would not
actually post it, but just drop it then post nothing, as it wasn't ever
added to the mode set update hash table. This resulted in hotplugs where
we loose the all the connectors we had, where we want to disable all
CRTCs and enable nothing, to fail to disable said CRTCs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3073>
