Commit Graph

37 Commits

Author SHA1 Message Date
Jonas Ådahl
4fa8b74dc7 monitor-unit-tests: Add musing about test declarations
https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:54 +08:00
Jonas Ådahl
f48acd8448 tests: Check that the crtc gets a logical monitor set
https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:54 +08:00
Jonas Ådahl
d0c9d2dc7b tests: Check that the monitors are properly generated
https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
4e812410cc monitor-manager: Move logical monitor into its own file
https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
0873e3812b backends: Rename MetaMonitorMode to MetaCrtcMode
The MetaMonitorMode referred to the mode of a CRTC, and with the future
introduction of a MetaMonitor, theh old name would be confusing.
Instead call it what it is.

https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
1650c35e38 monitor-manager: Rename MetaCRTC(Info) to MetaCrtc(Info)
Change to follow the naming convention used everywhere else. This means
changing CRTC to Crtc even though it is an abbreviation.

https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
156c478ccb tests/monitor: Add HiDPI test
This doesn't test the actual calculation, since that is done in the
backend, it only tests the configuration.

https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
10e6eae0dd tests/monitor: Add tiled monitor test
https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
8a8ab6c673 tests/monitor: Test preferred mode
https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
9e28303588 tests/monitor: Test one out of two outputs being off
https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
6776329cf5 tests/monitor: Test two crtcs, one output
https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
2e4c516d43 tests/monitor-manager: Add API to emulate a hotplug event
Let a test case pass a test setup, which will be used as the new state
emulated by the test backend.

https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
d920eaba4a tests: Also make test case verification declarative
Set up the expected result in a declarative way in the same place as
the test case setup is declared. This way we have a completely
declarative way to create test cases.

https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
376a76a082 tests: Make monitor test case setup more declarative
In order to more easily create more test cases, make the test case
setup more declarative.

https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
c6d940d3b2 tests: Make monitor unit tests create initial config
This way we have both the test setup and testing in the same file.

https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
95c101a0ba tests: Use custom Wayland display name
This gets rid of a warning about the Wayland display name already being
taken.

https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
12150c1ca7 tests: Add basic monitor configuration tests
The added test checks that two monitors are lied out on a row next to
each other.

https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Jonas Ådahl
a251675cc0 tests: Use special purpose backend in unit tests
Use a special purpose backend when running the unit tests. This will
eventually allow testing things like configuration and hot plugging.

https://bugzilla.gnome.org/show_bug.cgi?id=777732
2017-01-25 16:28:53 +08:00
Florian Müllner
868b3fd01e unit-tests: Fix const compiler warning 2016-03-11 12:26:38 +01:00
Jonas Ådahl
2d65b485fd tests: Ensure tests run in a nested mutter
Since mutter was changed to be D-Bus activatable, the test cases has not
been working when running from inside a GNOME Wayland session. This
commit makes the test work again by ensuring the tests run in a nested
mutter instance.

https://bugzilla.gnome.org/show_bug.cgi?id=763125
2016-03-07 11:19:08 +08:00
Jonas Ådahl
821d737e2c tests: Test scheduling a later MetaLater from a later callback works
The added test tests for the bug fixed by "MetaLater: Invoke later
callbacks queued by earlier ones".

https://bugzilla.gnome.org/show_bug.cgi?id=755605
2016-02-26 17:52:01 +08:00
Jonas Ådahl
00139755ff tests: Add unit tests framework runner
Separate from meta-test-runner which runs metatests testing window
manager operations, a new test program (mutter-unit-tests) is
introduced. This is meant to run unit test like tests on various units
in mutter.

An initial test testing the order of MetaLater callback invokation was
added.

https://bugzilla.gnome.org/show_bug.cgi?id=755605
2016-02-26 17:52:01 +08:00
Jonas Ådahl
75b992c7d0 tests: Add test for testing that setting a parent affects the stack
A new test is added that tests that xdg_surface.set_parent (referred to
as "transient for" in X11 terminology) affects the stack immediately.

https://bugzilla.gnome.org/show_bug.cgi?id=755606
2015-12-23 14:59:36 +08:00
Jonas Ådahl
5054b2a99c tests: Don't rely on latency for actually showing Wayland windows
The test runner sends a "show" command to the test clients and assumes
this was enough work done by the client to enable the compositor to map
the window. Now that we wait to show a Wayland window until the first
buffer is attached (see bug 750552), we need to make sure that we attach
a buffer before assuming that we have the final stacking order.

So, to in order to continue relying on "show" to be enough to actually
show a window, let the test client wait until it has drawn the first
frame.

This makes the tests using Wayland clients test non-flaky.

https://bugzilla.gnome.org/show_bug.cgi?id=754711
2015-12-23 12:19:36 +08:00
Florian Müllner
bc00f118f3 Avoid shadowing existing variables 2015-09-24 03:08:22 +02:00
Florian Müllner
25a796afc6 Fix constness warnings 2015-09-24 03:01:51 +02:00
Jasper St. Pierre
cd4206764e Remove a few more guards for frees 2014-12-28 19:51:22 -08:00
Owen W. Taylor
cdfb301200 Add a test for stacking vs. minimization
Test that the guard window is in the right place.

https://bugzilla.gnome.org/show_bug.cgi?id=737233
2014-09-24 16:51:20 -04:00
Owen W. Taylor
371560c2b6 tests: Add minimize/unminimize commands
Add commands to request the client to minimize or unminimize the window;
unminimize doesn't currently work for GTK+ because it expects XMapRequest
to be received by the window manager, but the window is already mapped.

https://bugzilla.gnome.org/show_bug.cgi?id=737233
2014-09-24 16:26:17 -04:00
Owen W. Taylor
7616881afa test-runner: represent the guard window as '|' for assert_stacking
Allow putting '|' into the list of windows for assert_stacking to
represent the position of the guard window. Not present is the same
as at the beginning (bottom) of the list.

https://bugzilla.gnome.org/show_bug.cgi?id=737233
2014-09-24 16:26:17 -04:00
Owen W. Taylor
74c37d49c4 test-runner: make test_case_wait() wait for queued-work
Sometimes (for example with minimization) a request from the client
causes queued work rather than immediate work; so make the test client
'wait' command wait for a full frame cycle.

https://bugzilla.gnome.org/show_bug.cgi?id=737233
2014-09-24 16:26:17 -04:00
Owen W. Taylor
21f123c69f Don't restack windows while we are unmanaging them
Restacking the frame for a window while unmanaging the window is
harmless, but for undecorated (in particular, client-side-decorated)
windows, this causes problems because the window is typically
destroyed by the client immediately after withredrawing the window.

Skip windows flagged as being unmanaged when assembling the new
stack and when comparing the old order to the new stack.

Add a stacking test for this.
2014-09-16 13:44:42 -04:00
Owen W. Taylor
e53456d87c mutter-test-runner: Make criticals and warnings failures
Tests should not be counted as successful if Mutter is spewing
warnings - hook to the log handler so that we can catch that.
2014-09-16 10:59:45 -04:00
Owen W. Taylor
5716fc4b90 test-runner: Add 'csd' keyword for window creation
Allow specifying 'csd' when creating a window to make the client
create a client-side-decorated window.
2014-09-16 10:59:45 -04:00
Owen W. Taylor
73573a85de Replace MetaStackWindow with a 64-bit "stack ID"
Putting X windows and pointers to MetaWindows into a union had a number of
problems:

 - It caused awkward initialization and conditionalization
 - There was no way to refer to Wayland windows (represented by
   MetaWindow *) in the past, which is necessary for the MetaStackTracker
   algorithms
 - We never even cleaned up old MetaStackWindow so there could be
   records in MetaStackWindow pointing to freed MetaWindow.

Replace MetaStackWindow with a 64-bit "stack ID" which is:

 - The XID for X Windows
 - a "window stamp" for Wayland windows - window stamps are assigned
   for all MetaWindow and are unique across the life of the process.

https://bugzilla.gnome.org/show_bug.cgi?id=736559
2014-09-12 13:42:56 -04:00
Owen W. Taylor
b49a4ae0bc Add missing file from test framework
mutter-all.test.in was accidentally not committed.
2014-09-12 13:40:33 -04:00
Owen W. Taylor
2f63c39fa6 Add a test framework and stacking tests
Add a basic framework for tests of Mutter handling of client behavior;
mutter-test-runner is a Mutter-based compositor that forks off instances
of mutter-test-client and sends commands to them based on scripts.
The scripts also include assertions.

mutter-test-runner always runs in nested-Wayland mode since the separate
copy of Xwayland is helpful in giving a reliably clean X server to
test against.

Initially the commands and assertions are designed to test the stacking
behavior of Mutter, but the framework should be extensible to test other
parts of client behavior like focus.

The tests are installed according to:

https://wiki.gnome.org/Initiatives/GnomeGoals/InstalledTests

if --enable-installed-tests is passed to configure. You can run them
uninstalled with:

 cd src && make run-tests

(Not in 'make check' to avoid breaking 'make distcheck' if Mutter can't be
run nested.)

https://bugzilla.gnome.org/show_bug.cgi?id=736505
2014-09-12 13:14:51 -04:00