This actor is a non-reactive container that autoembeds itself into
the feedback window group in the compositor. The API is meant to
help on creating things attached to pointer/touchpoints, with an
X/Y attachment offset, and following the position of certain events.
Although not strictly a window group... This ClutterActor is
meant to stay always on top, and only show non-reactive actors
created by Mutter itself. Two possible usecases for this layer
are DnD surfaces, and touch spots.
We might also want to move cursors out of an overlay in MetaStage
into here at some point.
Keeping track of the surface will be necessary in case it is destroyed
during DnD, and the coordinates will be useful when figuring out the
snap back coordinates.
In Wayland, popup window types are not override-redirect, and thus can
steal window focus away from their parent window when clicked on.
This means that we need to make sure their appearance is properly
propagated to the parent windows so the parent windows don't lose their
focus while they're propagated.
When grabbing with DND, we need to leave the pointer alone and
under the client's control. The code here was a bit messy before about
when it unset the window cursor -- it did it whenever there was no
current surface after repicking, which is a bit wrong, since it will
fire during a drag grab.
Move the check for this to update_cursor_surface, which is our standard
"sync" API for this, and then call update_cursor_surface after we set
the focus.
During a DND grab, pointer->focus_surface is NULL, since the wl_pointer
doesn't have any focused surface (it's in drag mode). In this case, the
drag interface has control of the focus, and when dragging into a NULL
surface, drag_grab_focus won't get called, properly detaching it from
the previous surface.
Let the interface->focus implementation do the fizzling out.
In the future, we should split out wl_pointer's implementation
(pointer->focus_surface) from the Wayland side of the generic pointer
wrapper (pointer->current) and use our event routing system to determine
or similar whether it should go to wl_pointer or wl_data_device.
The code here was a bit messy with the addition of
hotplug_mode_update, and the comments were a bit confusing and
inaccurate. Clean it up and comment it a bit better to make the flow and
intention more clear.
We need to tell clutter's evdev backend about the desktop's key repeat
settings so that our own key bindings event processing and
gnome-shell's chrome widgets get their fake key events for continuous
key press as they expect.
Note that the wayland frontend filters out these events and thus
wayland clients do not see them as specced.
https://bugzilla.gnome.org/show_bug.cgi?id=728055
The X server applies a default keymap to hotplugged keyboard
devices. To enforce our current settings we must re-upload the keymap
when a new keyboard shows up.
Note that setting the VCK keymap causes the server to propagate it
to all slave keyboard devices.
https://bugzilla.gnome.org/show_bug.cgi?id=737673
Since we now directly expose the reverses bindings directly, we
don't have to have this special-case in do_choose_window.
More importantly, if the backwards binding is pressed and has the Shift
key included, this will actually revert it
This doesn't matter for Alt-Tab in gnome-shell, which already replaces
it with a better Alt-Tab replacement, but it does matter for Alt-Esc,
which switches between windows directly.
Windows are relocated before their workspace is removed, however this
is only necessary for windows that are *only* on that workspace; for
windows on all workspaces, that step is annoying as it will unset the
sticky state requested by the user.
https://bugzilla.gnome.org/show_bug.cgi?id=737625
The workspace MRU lists are updated when windows are managed/unmanaged
or change workspaces. However those updates obviously only apply to
existing workspaces - new workspaces will always start out with an empty
MRU list, despite sticky windows already being "on" that workspace.
As we now assert that the list contains all windows located on the
workspace, we need to initialize it correctly to avoid a crash.
https://bugzilla.gnome.org/show_bug.cgi?id=737581
We only grant requests to set the demands-attention hint if the window
is at least partially obscured; so for non-minimized windows on the
active workspace, we check if any other window on the same workspace
that is higher in the stack overlaps.
However in the case of a sticky window, window->workspace is NULL, so
we end up considering any non-sticky window on a different workspace.
At this point we have already established that the window is showing
on the active workspace, so use that to filter for windows that may
overlap.
Since the introduction of set_workspace_state(), window->workspace
will always be NULL when on_all_workspaces is set - passing that
to a workspace function that does not validate its input will then
result in a crash.
Use the get_workspace() function instead, which will always return
a valid workspace.
Since commit 2eec11b445, windows without a __NET_WM_DESKTOP property
that should be on all workspaces are not added to the active workspace;
this is correct, however not adding them to any workspace is not ...
We overrode the property for PowerSaveMode, which meant that gdbus's
auto-generated PropertiesChanged code wasn't being run.
This really confused gnome-rr and gnome-settings-daemon's power plugin
about the current DPMS state of the display, since they used their
cached PowerSaveMode properties, and never saw a PropertiesChanged being
emitted.
If a display was on, they set it to off, and then set it back on, the
setting back on would never fire, since they thought the display was
already off.
To fix this, remove our custom property override and just respond to
notifications on the object.
Namely, this fixes the DPMS management when receiving notifications so
that it now properly times out.
set_workspace_state () returns early when the desired sticky state
and workspace match the current property values, assuming that the
corresponding MRU lists are already correct in that case.
However that might not be the case when we are setting the initial
state, so don't take the shortcut in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=737178
A window may either be sticky because it has been requested as such,
or because it is placed on a non-primary monitor (and the corresponding
preference is set). While we do take the latter into account, we
currently override the sticky state later during initialization;
be a bit more careful there to get the initial state right.
https://bugzilla.gnome.org/show_bug.cgi?id=737178
Use the new DRM capabilities to figure out the correct cursor size, and
make sure that matches instead of hardcoding 64x64. This fixes incorrect
rendering on some newer AMD cards that support 256x256 cursors.
Based heavily on a patch by:
Alvaro Fernando García <alvarofernandogarcia@gmail.com>
Commit 1af0033368 made a subtle change
regarding how XKeysymToKeycode behaves. It does a depth first search
while XKeysymToKeycode is documented to do a breadth first search:
"this function looks in each column of the core keyboard mapping in
turn and returns the lowest numbered key that matches in the lowest
numbered group" - from the XKB library documentation
Looping over all keycodes for each layout and level index makes us go
back to the previous behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=737134
With the change to how hidden windows are stacked, the position
of the guard window with respect to the hidden windows got flipped
and the guard window was at the bottom of everything; fix it to
be on top of the hidden windows.
https://bugzilla.gnome.org/show_bug.cgi?id=737233
Add commands to request the client to minimize or unminimize the window;
unminimize doesn't currently work for GTK+ because it expects XMapRequest
to be received by the window manager, but the window is already mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=737233
Allow putting '|' into the list of windows for assert_stacking to
represent the position of the guard window. Not present is the same
as at the beginning (bottom) of the list.
https://bugzilla.gnome.org/show_bug.cgi?id=737233
Sometimes (for example with minimization) a request from the client
causes queued work rather than immediate work; so make the test client
'wait' command wait for a full frame cycle.
https://bugzilla.gnome.org/show_bug.cgi?id=737233
