So that we can show a UProf profile when running test-journal the test
now declares a static "Mainloop" timer which it starts/stops around the
GLib mainloop it runs.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 66b3d23c201b2e7dd74602e6e6e6c2d8ead47bcd)
As a helpful aid Cogl will now print a warning if no "Mainloop" UProf
timer was setup by the application that explains that either Clutter
should be built with --enable-profile or if Clutter isn't being used
then it shows how it can create its own Mainloop timer.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 3d052dbca86bf36f30b2d60ff59b967d14665436)
This adds a uprof timer around the _cogl_journal_discard() at the end of
_cogl_journal_flush() since this sometimes takes a significant
proportion of the time to flush the journal.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 14ffc3a197100be814452af2d0f839970353b04d)
Since we only want to disable the debug features that may impact
performance when building with --disable-debug this ensures that the
COGL_DEBUG_ macros aren't defined as NOPs for non-debug builds.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit c4b50040b5c033e370eb721d1d217eced8ebdaad)
_cogl_pipeline_get_layer_with_flags accepts a CoglPipelineGetLayerFlags
flags argument and understands one COGL_PIPELINE_GET_LAYER_NO_CREATE
flag. There was a mistake with the definition of this enum though so
COGL_PIPELINE_GET_LAYER_NO_CREATE had a value of 0 and so testing for
the flag using the bitwise & operator would never find the flag set.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 5923f92f1428b3eb4977b5f21723f1b19a9d284a)
If a primitive is already line based then we don't need to do anything
special to draw it in wireframe mode.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit fb575a42c308739a7185311a613b1a5f49dbfb39)
If a CoglPrimitive is associated with a set of indices then we must
unref those indices when freeing the primitive to avoid a leak.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 45cac786b55c953e44f98b864add952b9e398b13)
gbm_bo_get_pitch was renamed to gbm_bo_get_stride to be consistent with
how the terms pitch and stride are used throughout mesa. This updates
the Cogl backend to use the new gbm_bo_get_stride name.
For compatibility with previous version of libgbm we now explicitly
check the version of libgbm in configure.ac and expose
COGL_GBM_{MAJOR,MINOR,MICRO} defines to the code so we can conditionally
use the older gbm_bo_get_pitch() name with older versions.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 47c6247095e2f1f8725c4eb08d38c9de15e283cd)
The version number macros were using the @COGL_VERSION_*@
substitutions. These are always defined to 2.0.0 in the 1.x releases
so we need to use the Cogl @COGL_1_VERSION_*@ substitutions instead to
get the real version number.
When the GL_EXT_unpack_subimage extension is not available and a
subregion of a texture is uploaded then it should first copy the
subregion to a newly allocated bitmap. However it was then later still
trying to prepare the upload using the original src_x and src_y values
which would cause an assertion failure. This patch fixes it to just
reset those to zero if the subregion is first copied.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 6f9a62db6f846f1d76e3ca16d9d8cdadf82a7009)
Update the cogl.symbols file for the 1.12 series, where symbols
were added for the following commits:
010d16f6: Adds initial GLES2 integration support
6eb88648: Add a cogl_matrix_init_from_euler function
5e8ff248: Add functions to directly transform from a euler or a quaternion
1686e754: bitmap: Adds cogl_android_bitmap_new_from_asset()
df515741: onscreen: Adds support for resizable windows
e347135b: Move cogl_wayland_display_ proto to cogl-wayland-server.h
Plus, when we branched out for 1.12, some needed symbols were missing, so
we would need to make up for them, in particular those in cogl-shader.h
and cogl-path-functions.h.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Don't use --symbol-prefix cogl_gtype as we are still using the old
namespace in cogl-1.12, so there will still be the various _get_type()'s
like before
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The surfaceless extension that Mesa advertises has been renamed to
EGL_KHR_surfaceless_context instead of a separate extension for the
GLES, GLES2 and GL APIs and the new extension has been ratified by
Khronos. Therefore the KMS backend no longer runs against Mesa master.
We could just rename the extension we check for, however Weston (the
sample Wayland compositor) has switched to just creating a dummy GBM
surface and not using the surfaceless extension at all. We should
probably do the same thing.
Using the surfaceless extension could be a good idea but we don't
really need to rely on it for KMS and we would want to do it for all
EGL backends, not just the KMS backend.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d4f22f8cb013d417c99ba03924538924191c2fe6)
cogl_framebuffer_set_{projection,modelview}_matrix don't need to read
from the matrix argument so they should probably take a const pointer.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 710d6af053aca97935b54f9ff68858ef51f4482b)
Since fallback for vblank wait via manual drm ioctl was removed in
commit 3bc70687ac there is no need to
check for libdrm anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=678316
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit b84047a578b7746e421cd553e781788925cff90f)
When loading images on Quartz, the image is rendered into a bitmap
context using a buffer allocated with
_cogl_bitmap_new_with_malloc_buffer. However this buffer is not
initialised and by default Quartz will blend the source image with the
destination so if there are transparent parts in the source image it
will leave garbage in the destination. This patch changes the blend
mode to 'copy' so that it won't try to blend.
Before 5b785dd4 the buffer was cleared because it was allocated with
g_malloc0 so it was working in that case. Presumably it should be more
efficient to disable blending and avoid the clear though.
https://bugzilla.gnome.org/show_bug.cgi?id=680124
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 5ba7f4e6837a539d92cbe45491f79a8926fd6828)
This adds the AC_GNU_SOURCE macro to configure.ac to ensure _GNU_SOURCE
is defined while compiling Cogl. This is required to use memmem for
example.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 1ed717dc12fc4d2cb49010232de93ff46684aa6a)
When the CoglGLES2Context is bound to read from a CoglOffscreen then
the result will be upside down from what GL expects if
glCopyTexImage2D is used directly. To fix that, this patch now wraps
glCopyTexImage2D and glCopyTexSubImage2D so that the copy is doing by
binding an FBO to the target texture and then rendering a quad
sampling from the texture in the offscreen framebuffer.
The rendering is done using the Cogl context rather than the GLES2
context because otherwise it would have to do a fair bit of work to
try and stash the old state on the context before setting up the state
to do the blit. The down side of this is that the contexts need to be
synchronized so that the rendering will be up-to-date. As far as I
understand from the GL spec, this requires a glFinish and then the
texture needs to be rebound in the new context because updates to
shared objects are guaranteed to be reflected until the object is
rebound.
GLES2 supports using glCopyTexImage2D for cube map textures. As Cogl
doesn't currently have support for cube maps, it is quite hard to get
that to work with this patch. For now attempts to copy to a cube map
texture will just be sliently ignored.
This patch also includes a test case which renders an image to the
framebuffer and then copies it to a texture. The texture is then
rendered back to the framebuffer and the contents are checked for the
correct orientation using glReadPixels.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 30b6da8134bad95267265e26685c7475f6c351c9)
This patch adds a hash table mapping texture object IDs to a struct so
that we can keep track of some of the state for each texture object.
Currently it will just track the width and height of the texture 2D
target.
Additionally it will now try to delete any texture objects that have
data created for them by the GLES2 context so that it won't leak them.
It only tracks objects that get data set on them, not all objects that
are bound because it is possible to use the GLES2 context with foreign
textures via cogl_gles2_texture_get_handle() and we don't want to
delete those.
In order to keep track of the currently bound texture object it also
needs to track the active texture unit.
Note that this state tracking will probably go wrong if GL throws an
error for invalid state. For example if glActiveTexture is called with
an invalid texture unit then GL will ignore the binding but Cogl will
assume it is valid and the state tracking will get out of sync.
Perhaps it would be good if Cogl could detect the errors but this is
difficult to do without consuming them.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d8c72bb56cf3598fc57d629edc618f1bfa79f125)
This adds an extra test to test-gles2-context which renders to an FBO
and then checks that the orientation is correct once the texture is
rendered via Cogl. This should test the code path to flip the GLES2
rendering in Cogl.
The rendering is done in three different ways to test the various
state that needs flipping:
• Just renders two triangle strips, one at the top and one at the
bottom.
• Renders two full screen triangle strips, but each with a different
viewport to clip it to the top or the bottom.
• Clears the screen with two different colors and a scissor to either
the top or the bottom.
• Renders both quads twice with two different colors and two different
front face states.
Additionally the rendering is verified by calling glReadPixels to
check that the returned pixels are flipped correctly.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 5b097f9bc4a3eb316c6bf0d9fe8db00ff93bfe73)
The test was passing NULL as the error argument but then trying to use
the error object if it failed so it would just crash in that case.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 61cbbb3000fb4001d51999fd05179c620b7e56bf)
Cogl has a different origin for texture coordinates than OpenGL so
that the results of rendering to a texture should leave the top of the
image at the texture coordinate 0,0 rather than the bottom. When a
GLES2 context is used to render to a Cogl texture via a CoglOffscreen
we don't really want the application to have to be aware of the
mismatch and flip the texture coordinates. To get that to work, this
patch now tracks all of the programs that the application generates
using the context and sneaks in an extra vertex shader with an
alternative main function. This main function multiplies the final
calculated gl_Position by a vector uniform which we can use to flip
the image. When the application uploads the source code for a vertex
shader we now replace any occurrences of the token 'main' with '_c31'
and this renamed function gets called from the replacement main
function. The token has a weird name so that it will be unlikely to
conflict with a variable name in the application's source but it also
needs to have the same number of characters as the original token so
that it won't affect column numbers in the error reporting.
We are also wrapping glGetShaderSource so that we can try to revert
the token name. The same goes for the error logs just in case the
error report mentions function names.
Both places that cause drawing to occur (glDrawElements and
glDrawArrays) are now also wrapped so that we can update the uniform
value whenever the program is used with a different type of
framebuffer from last time.
We additionally need to manually track the state for the viewport, the
stencil box and the front face because all of these will be affected
by whether we are flipping the image or not. Any attempts to change
these states will be queued and instead flushed at the last minute
before drawing.
There are still some known issues with this patch:
• glCopyTexImage2D and glCopyTexSubImage2D will do the wrong thing
when copying data from a CoglOffscreen. This could be quite fiddly
to solve.
• Point sprites won't flip correctly. To make this work we would need
to flip the gl_PointSprite builtin variable somehow. This is done in
the fragment shader not the vertex shader so flipping the calculated
gl_Position doesn't help here.
• The patch doesn't attempt to flip rendering to framebuffers for
textures created within the GLES2 context. This probably makes sense
because those textures are likely to be used within the GLES2
context in which case we want to leave the texture coordinates as
they are. However, if the texture is shared back out to Cogl with
cogl_gles2_texture_2d_new_from_handle then the texture will be
upside-down.
• The application can discover our secret uniform that we added via
glGetActiveUniform. It might be worth trying to disguise this by
wrapping that function although that could be quite fiddly.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d589bf19e51f22c3241b2a18db10f22131ac126a)
memmem is a GNU libc extension that works like strstr except that the
size of the needle and the haystack are passed into the function
instead of using null-terminated strings.
This patch adds a wrapper function called 'cogl_util_memmem' so that
we can use this function. There is a configure check and if the
function is not available then a fallback implementation will be used.
Otherwise cogl_util_memmem is just defined to memmem.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 1dd1b0a67f6238e13f7f9253fb03addada0541b7)
All of the functions that create and destroy shaders are now wrapped
in the CoglGLES2Context so that we can track some extra data for them.
There are hash tables mapping object IDs to the corresponding data.
The data is currently not used for anything but will be in later
patches.
The glUseProgram, glAttachShader and glDetachShader functions
additionally need to be wrapped because GL does not delete shader
objects that are in use. Therefore we need to have a reference count
on the data so we can recognise when the last use has been removed.
The IDs are assumed to be specific to an individual CoglGLES2Context.
This is technically not the case because all of the CoglGLES2Contexts
are in the same share list. However we don't really want this to be
the case so currently we will assume sharing the object IDs between
contexts is undefined behaviour. Eventually we may want to actually
enforce this.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 05dc1e34785ae5f5484cd398ecc5464bd8bd3dcd)
In GL, the default viewport and scissor should be set to the size of
the first surface that the context is bound to. If a CoglGLES2Context
is first used with an offscreen framebuffer then this surface will
actually be the dummy 1x1 window which will mess up the defaults. To
fix that, this patch makes it just always override the viewport and
scissor the first time the context is bound to something.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 02567b3e6b64e6849b9f7c6aa2137401be7ece8d)
Since 0773107deb9ede the prototype for
cogl_wayland_display_set_compositor_display() has moved into
cogl-wayland-server.h but cogl-display.c wasn't updated to include this
header.
(cherry picked from commit f6ccff9992fcfb9497ce91dd299460362476ba7a)
clutter-project.org is no longer accessible for uploading releases so
this just removes all mention of it from the release rules.
(cherry picked from commit 66c291a3a4e811bde7f022e756f93d0f224975c3)
We need to avoid including wayland-server.h or wayland-client.h
indirectly when including cogl.h because there are overlapping typedef
names between the client and server wayland headers and we can't assume
whether Cogl is being used client or server side. This moves the
prototype for cogl_wayland_display_set_compositor_display() into
cogl-wayland-server.h which Cogl apps must include explicitly if the
want access to server side Cogl Wayland symbols.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 0773107deb9eded408e2801f217462c5d551f15a)
The header guard for cogl-texture-2d-private.h was
__COGL_TEXTURE_2D_H. This would conflict with the header guard for
cogl-texture-2d.h except there a small typo ('TEXURE') so that it
was subtly different. This fixes them both to make more sense.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 222ec4d009973cb62020a9da05f72dea41460b33)
This function should take an extra third paramter to specify whether
the procedure is in core or not. The parameter is not used so this
patch just fixes an annoying warning.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit eed4ac80cd8c3fa1859493c9bb00547038be6095)
This just gets rid of some annoying warnings.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 3d0aea04d1f6a8094b749e20a59d8a9a95a6235e)
