Some x86 clamshell design devices use portrait tablet LCD panels while
they should use a landscape panel, resoluting in a 90 degree rotated
picture.
Newer kernels detect this and rotate the fb console in software to
compensate. These kernels also export their knowledge of the LCD panel
orientation vs the casing in a "panel orientation" drm_connector property.
This commit adds support to mutter for reading the "panel orientation"
and transparently (from a mutter consumer's pov) fixing this by applying
a (hidden) rotation transform to compensate for the panel orientation.
Related: https://bugs.freedesktop.org/show_bug.cgi?id=94894https://bugzilla.gnome.org/show_bug.cgi?id=782294
If input happens to be grabbed somewhere along the shell, and ungrabbed
while a touch operation is ongoing, the wayland bits will happily start
sending wl_touch.update events from an undeterminate point, without
clients having ever received wl_touch.down for that id.
Consider those touches grabbed for the entirety of their lifetime, if
wl_touch.down wasn't received by the client, no other events will.
https://bugzilla.gnome.org/show_bug.cgi?id=776220
When a Wayland client issues a shortcut inhibit request which is granted
by the user, the Super key should be passed to the surface instead of
being handled by the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=790627
When capture_view* functions are called with the paint flag set
to TRUE, we need to setup the framebuffer, however this was
happening after setting up the viewport, while the viewport
needs the framebuffer to be valid when calling cogl_set_viewport.
https://bugzilla.gnome.org/show_bug.cgi?id=791809
On VT switch, the xkb state layout index is lost and reset to the first
group, so if the first layout is not the last one being used, the xkb
state used in both meta-wayland-keyboard.c and clutter/evdev will be
desynchronized with the keyboard source indicator in the gnome-shell UI.
Save the effective layout chosen along with the seat so it can be
restored when reclaiming devices.
Use the saved layout index from the clutter/evdev's seat to restore the
layout in meta-wayland-keyboard, so that switching VT doesn't reset the
layout and causes further discrepancies with the layout indicator in the
gnome-shell UI.
https://bugzilla.gnome.org/show_bug.cgi?id=791383
The reason why multiple keycodes could be mapped to a single keysym was
to support having both KEY_FAVORITES and KEY_BOOKMARK map to
XF86Favorites. However, iterating through all layout levels adding all
key codes has severe consequences on layouts with levels that map
things like numbers and arrow. The result is that keybindings that
should only have been added for keycodes from the first level, are
replaced by some unexpected keycode where the same keysym was found on
another level.
An example of this is the up-arrow key and l symbol. Normally you'd find
both the up-arrow symbol and the l symbol on the first level and be done
with it. However, on the German Neo-2 layout, layout level 4 maps the
KEY_E to the l symbol, while layout level 4 maps KEY_E to up-arrow.
Which ever gets to take priority is arbitrary, but for this particular
case KEY_E incorrectly mapped to up-arrow instead of the l symbol,
causing the keyboard shortcut Super+l, which would normally lock the
screen, to trigger the workspace-up (Super+up-arrow) key binding.
https://bugzilla.gnome.org/show_bug.cgi?id=789300
This protocol is limited to Xwayland only and is not visible/usable by
any other client.
Mutter uses the following mechanisms to determine if an X11 client
should be granted a grab:
- is "xwayland-allow-grabs" set?
- if set, is the client blacklisted?
- otherwise, has the client set the X11 window property
_XWAYLAND_MAY_GRAB_KEYBOARD on the window using a client message?
- if not, is it a client white-listed either via the default system
list or the settings "xwayland-grab-access-rules"?
https://bugzilla.gnome.org/show_bug.cgi?id=783342
Add a new client message "_XWAYLAND_MAY_GRAB_KEYBOARD" that X11 clients
can use to tell mutter this is a well behaving X11 client so it may
grant the keyboard grabs when requested.
An X11 client wishing to be granted Xwayland grabs by gnome-shell/mutter
must send a ClientMessage to the root window with:
- message_type set to "_XWAYLAND_MAY_GRAB_KEYBOARD"
- window set to the xid of the window on which the grab is to be issued
- data.l[0] to a non-zero value
Note: Sending this client message when running a plain native X11
environment would have no effect.
https://bugzilla.gnome.org/show_bug.cgi?id=783342
MetaWindowXwayland derives from MetaWindowX11 to allow for some Xwayland
specific vfunc that wouldn't apply to plain X11 windows, such as
shortcut inhibit routines.
https://bugzilla.gnome.org/show_bug.cgi?id=783342
The xdg-output protocol aims at describing outputs in way which is
more in line with the concept of an output on desktop oriented systems.
For now it just features the position and logical size which describe
the output position and size in the global compositor space.
This is however much useful for Xwayland to advertise the output size
and position to X11 clients which need this to configure their surfaces
in the global compositor space as the compositor may apply a different
scale from what is advertised by the output scaling property (to achieve
fractional scaling, for example).
This was added in wayland-protocols 1.10.
https://bugzilla.gnome.org/show_bug.cgi?id=787363
When the top window actor is destroyed, we need to make sure that
all its references are removed or it could be picked again in next
windows sync, causing crashes.
Since the window might or might not be destroyed when removed (depending
weather animations are in progress over it or not), it's just safer
to wait it to be destroyed before cleaning up any of its reference.
https://bugzilla.gnome.org/show_bug.cgi?id=791006
Changing the test monitor managers ability to rotate CRTCs in one test
affected the next test. Avoid leaking such state by resetting it before
each test. To continue passing, some tests needed to be updated
regarding to still pass.
https://bugzilla.gnome.org/show_bug.cgi?id=788915
Add a test case that checks that we don't try to revert to a
laptop-panel-only configuration after closing the lid after an external
monitor is connected.
https://bugzilla.gnome.org/show_bug.cgi?id=788915
We only counted configured monitors and whether the config was
applicable (could be assigned), howeverwe didn't include disabled
monitors when comparing. This could caused incorrect configurations to
be applied when trying to use the previous configuration.
One scenario where this happened was one a system with one laptop
screen and one external monitor that was hot plugged some point after
start up. When the laptop lid was closed, the 'previous configuration'
being the configuration where only the laptop panel was enabled, passed
'is-complete' check as the number of configured monitors were correct,
and the configuration was applicable.
Avoid this issue by simply comparing the configuration key of the
previous configuration and the configuration key of the current state.
This correctly identifies a laptop panel with the lid closed as
inaccessible, thus doesn't incorrectly revert to the previous
configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=788915
When deriving the list of disabled monitors when creating new monitors
configs, don't include the laptop panel if the lid is currently closed,
as we consider the laptop panel nonexistent when the laptop lid is
closed when it comes to configuration.
The laptop panel connector(s) will either way be appropriately disabled
anyway, as the field listing disabled monitors in the configuration do
not affect actual CRTC/connector assignments.
https://bugzilla.gnome.org/show_bug.cgi?id=788915
If a parent doesn't have a window, it means it could have been
dismissed (for example due to a input serial race), but the more recent
popup might win the input serial race and try to map anyway. This would
result in a crash later on when trying to process the placement rule,
as the parent already has no window.
https://bugzilla.gnome.org/show_bug.cgi?id=790358
Move the top-most-popup correctness check to the finish_popup_setup()
function after checking the serial. If we pass the serial check, we
should have reached a state that if there are any popups they should be
the one from the same client.
Also avoid failing a client that correctly set the top-most popup at map
time, but where at the time of processing the top most popup have
already been dismissed by the compositor for some arbitrary reason.
https://bugzilla.gnome.org/show_bug.cgi?id=790358
Commit b1a0bf891 broke the previous logic that we would only fallback
to the root cursor if 1) windows are not interactable or 2) no window
cursor is currently set (i.e. not hovering over any window). Now it
will set up the root cursor if it's NULL, which breaks clients
explicitly setting an invisible cursor. This commit restaurates the
previous behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=754806
This function is supposedly not failable, so just move the theme_dirty
flag clearing to the beginning of the function. Protects against cases
where requesting a cursor image may result in it being loaded and set
as a texture, which emits ::texture-changed, which may end up requesting
the cursor image again.
https://bugzilla.gnome.org/show_bug.cgi?id=754806
As wayland implements the cursor role, it consists of a persistent
MetaCursorSprite that gets the backing texture changed. This is
inconvenient for the places using MetaCursorTracker to track cursor
changes, as they actually track MetaCursorSprites.
This signal will be used to trigger emission of
MetaCursorTracker::cursor-changed, which will make users able to
update accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=754806
Just like X11/XFixes behaves, the current cursor is not affected
by its visibility, so it can be queried while invisible (possibly
to be replaced).
For this, keep an extra effective_cursor pointer that will be
either equal to displayed_cursor (maybe a bit of a misnomer now)
or NULL if the cursor is invisible. The MetaCursorRenderer
management is tied to the former, and the ::cursor-changed signal
emission to the latter.
https://bugzilla.gnome.org/show_bug.cgi?id=754806
We must emit ::dnd-leave to pair the ::dnd-enter that shall be
emitted whenever the plugin grab begins, otherwise we leave
listeners unable to clean up if the plugin begins and ends a
grab while there is an ongoing DnD operation.
https://bugzilla.gnome.org/show_bug.cgi?id=784545
Adds a set of convenient functions that can be shared between x11 input
device backends (namely core-x11 and xi2) to control XKB accessibility
features.
https://bugzilla.gnome.org/show_bug.cgi?id=788564
MetaWaylandKeyboard maintains its own xkb_state used to update Wayland
clients.
Add the necessary hooks to make sure the sticky keys modifier masks set
in clutter-evdev are also applied in MetaWaylandKeyboard's xkb_state so
that Wayland clients also benefit from sticky keys.
https://bugzilla.gnome.org/show_bug.cgi?id=788564
