Commit Graph

5237 Commits

Author SHA1 Message Date
Emmanuele Bassi
2d4ddc1b11 Add test-cogl-wrap-mode to the ignore list 2010-04-14 00:52:23 +01:00
Neil Roberts
1445e9d32d cogl-atlas-texture: Fix a memory leak
The CoglAtlasTexture struct was not being freed in
_cogl_atlas_texture_free so there would be a small leak whenever a
texture was destroyed.

Thanks to Robert Bragg for spotting this.
2010-04-13 17:26:03 +01:00
Neil Roberts
30f43c6cda cogl-material: Use CLAMP_TO_EDGE for WRAP_AUTOMATIC unless overriden
CoglMaterial now sets GL_CLAMP_TO_EDGE if WRAP_MODE_AUTOMATIC is used
unless it is overridden when the material is flushed. The primitives
are still expected to expose repeat semantics so no user visible
changes are made. The idea is that drawing non-repeated textures is
the most common case so if we make clamp_to_ege the default then we
will reduce the number of times we have to override the
material. Avoiding overrides will become important if the overriding
mechanism is replaced with one where the primitive is expected to copy
the material and change that instead.
2010-04-12 15:44:23 +01:00
Neil Roberts
08a4995383 tests: Add a conformance test for the wrap modes of a cogl material
This renders a texture using different combinations of wrap modes for
the s and t coordinates and then verifies that the expected wrapping
is acheived. The texture is drawn using rectangles, polygons and
vbos. There is also code to test a rectangle using an atlased texture
(which should test the manual repeating) however the validation for
this is currently disabled because it doesn't work.

http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-12 15:44:23 +01:00
Neil Roberts
75f1dc90b0 cogl-material: Add support for setting the wrap mode for a layer
Previously, Cogl's texture coordinate system was effectively always
GL_REPEAT so that if an application specifies coordinates outside the
range 0→1 it would get repeated copies of the texture. It would
however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates
are in the range 0→1 so that in the common case that the whole texture
is being drawn with linear filtering it will not blend in edge pixels
from the opposite sides.

This patch adds the option for applications to change the wrap mode
per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge'
and 'automatic'. The automatic map mode is the default and it
implements the previous behaviour. The wrap mode can be changed for
the s and t coordinates independently. I've tried to make the
internals support setting the r coordinate but as we don't support 3D
textures yet I haven't exposed any public API for it.

The texture backends still have a set_wrap_mode virtual but this value
is intended to be transitory and it will be changed whenever the
material is flushed (although the backends are expected to cache it so
that it won't use too many GL calls). In my understanding this value
was always meant to be transitory and all primitives were meant to set
the value before drawing. However there were comments suggesting that
this is not the expected behaviour. In particular the vertex buffer
drawing code never set a wrap mode so it would end up with whatever
the texture was previously used for. These issues are now fixed
because the material will always set the wrap modes.

There is code to manually implement clamp-to-edge for textures that
can't be hardware repeated. However this doesn't fully work because it
relies on being able to draw the stretched parts using quads with the
same values for tx1 and tx2. The texture iteration code doesn't
support this so it breaks. This is a separate bug and it isn't
trivially solved.

When flushing a material there are now extra options to set wrap mode
overrides. The overrides are an array of values for each layer that
specifies an override for the s, t or r coordinates. The primitives
use this to implement the automatic wrap mode. cogl_polygon also uses
it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced
textures. Although this code has been added it looks like the sliced
trick has been broken for a while and I haven't attempted to fix it
here.

I've added a constant to represent the maximum number of layers that a
material supports so that I can size the overrides array. I've set it
to 32 because as far as I can tell we have that limit imposed anyway
because the other flush options use a guint32 to store a flag about
each layer. The overrides array ends up adding 32 bytes to each flush
options struct which may be a concern.

http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-12 15:44:23 +01:00
Neil Roberts
463ebc8220 Split the wrap mode of _cogl_texture_set_wrap_mode into three
GL supports setting different wrap modes for the s, t and r
coordinates so we should design the backend interface to support that
also. The r coordinate is not currently used by any of the backends
but we might as well have it to make life easier if we ever add
support for 3D textures.

http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-12 15:44:23 +01:00
Neil Roberts
774f5e0bdf cogl: Make private members really hard to accidentally use
CoglColor and CoglMatrix have public declarations with private members
so that we are free to change the implementation but the structures
could still be allocated on the stack in applications. However it's
quite easy not to realise the members are private and then access them
directly. This patch wraps the members in a macro which redefines the
symbol name when including the header outside of the clutter source.

http://bugzilla.openedhand.com/show_bug.cgi?id=2065
2010-04-12 15:38:58 +01:00
Neil Roberts
3fea5051db CoglMatrix: Don't make the matrix fields private
The xx, yx, zx etc fields are meant to be read-only but they were
marked as private with the gtk-doc annotation. This patch moves the
private marker so that the 16 float member fields are public but the
type, inverted matrix, flags and padding are not.
2010-04-12 15:38:58 +01:00
Neil Roberts
94465cfe39 Fix indentation in CoglMatrix
The members of CoglMatrix were indented by 4 characters instead of 2.
2010-04-12 15:38:58 +01:00
Damien Lespiau
e0f41fa166 actor: Flag the color argument of the ::pick signal as being constant
When emitting signals, one can mark arguments as being "static", ie an
indication this argument will not change during the signal emission.
This allows the signal marshalling code to create static GValues, in
this case not to copy the Color.

http://bugzilla.openedhand.com/show_bug.cgi?id=2073
2010-04-12 12:48:46 +01:00
Emmanuele Bassi
93a5b78e5a actor: Do not use G_UNLIKELY in paint()
We decide whether the paint() should be a real paint or a paint in pick
mode depending on the global pick_mode value. Using G_UNLIKELY() on an
operation that most likely is going to be executed once every frame is
going to blow a lot of cache lines and frak with the CPU branch
prediction. Not good.
2010-04-09 18:28:37 +01:00
Emmanuele Bassi
6583f8bb49 tests: Fix test-script.json
A trailing comma is breaking the validity of test-script.json
2010-04-09 18:28:37 +01:00
Fridrich Strba
c99a24d341 win32: Use GCLP_* instead of GCL_* when calling GetClassLongPtr
(commit message by Neil)

GetClassLongPtr expects a different constant when retrieving handles
or pointers. This fixes problems using Win64.
2010-04-09 15:43:42 +01:00
Neil Roberts
f2776ea32b Add tests/conform/test-cogl-path to .gitignore 2010-04-09 14:10:11 +01:00
Neil Roberts
10b16b4b7e Add a test case for cogl_path
This tests various paths drawing rectangles and verifies that the
expected pixels are filled in. Some of the paths are drawn by copying
an existing path and modifying it which should test the copy-on-write
code.
2010-04-08 19:54:20 +01:00
Neil Roberts
9ee6dd240b cogl: Support retained paths
This adds three new API calls:

  CoglHandle cogl_path_get()
  void cogl_path_set(CoglHandle path)
  CoglHandle cogl_path_copy(CoglHandle path)

All of the fields relating to the path have been moved from the Cogl
context to a new CoglPath handle type. The cogl context now just
contains a CoglPath handle. All of the existing path commands
manipulate the data in the current path handle. cogl_path_new now just
creates a new path handle and unrefs the old one.

The path handle can be stored for later with cogl_path_get. The path
can then be copied with cogl_path_copy. Internally it implements
copy-on-write semantics with an extra optimisation that it will only
copy the data if the new path is modified, but not if the original
path is modified. It can do this because the only way to modify a path
is by appending to it so the copied path is able to store its own path
length and only render the nodes up to that length. For this to work
the copied path also needs to keep its own copies of the path extents
because the parent path may change these by adding nodes.

The clip stack now uses the cogl_path_copy mechanism to store paths in
the stack instead of directly copying the data. This should save some
memory and processing time.
2010-04-08 19:53:38 +01:00
Robert Bragg
45885850d2 cogl: renames cogl_multiply_matrix to cogl_transform
Although cogl_multiply_matrix was consistent with OpenGL, after further
consideration it was agreed that cogl_transform is a better name. Given
that it's in the global cogl_ namespace cogl_transform seems more self
documenting.
2010-04-08 14:37:01 +01:00
Robert Bragg
412a468d5e docs: This improves the documentation for cogl_push_framebuffer
This adds an example of how to setup a Clutter style 2D coordinate space
and clarifies what state is owned by a framebuffer. (projection,
modelview, viewport and clip stack)

When we expose more cogl_framebuffer API this example will hopefully be
migrated into a more extensive introduction to using framebuffers.
2010-04-06 09:26:10 +01:00
Robert Bragg
d2d890a33e test-cogl-offscreen: Setup a clutter style modelview/projection
This updates test-cogl-offscreen to give an example of setting up a
CoglFramebuffer with a Clutter style 2D coordinate system with (0,0) top
left and (framebuffer_width, framebuffer_height) bottom right.
2010-04-06 09:26:10 +01:00
Robert Bragg
6f6ab86929 cogl: move cogl_set_source* funcs into cogl.c
Previously cogl_set_source and cogl_set_source_texture were in
cogl-material.c and the cogl_set_source_color* funcs were in
cogl-color.c. Originally this was because cogl.c was duplicated between
the GL and GLES backends and we didn't want to add to the amount of
duplicated code, but these files have since been consolidated into one
cogl.c.
2010-04-06 09:26:05 +01:00
Robert Bragg
a678e9f627 cogl: adds convenience cogl_multiply_matrix function
Quite often it's desirable to be able to multiply the current modelview
matrix by an arbitrary matrix. Currently though you have to first
explicitly call cogl_get_modelview_matrix to get the current modelview
into a temporary variable, then you need to multiply it with your matrix
using cogl_matrix_multiply and finally use cogl_set_modelview_matrix to
make the result be the new modelview. This new convenience function lets
more efficiently skip the first get and last set steps.
2010-04-01 13:24:56 +01:00
Robert Bragg
1dd70aff73 cogl: rename cogl_enable to _cogl_enable
Every now and then someone sees the cogl_enable API and gets confused,
thinking its public API so this renames the symbol to be clear that it's
is an internal only API.
2010-04-01 12:34:42 +01:00
Neil Roberts
fdf608af4c test-cogl-tex-polygon: Actually use the material it creates
test-cogl-tex-polygon creates a separate material so that it can set
the texture filters. However in the paint functions that use
cogl_polygon it was calling cogl_set_source_texture which replaces the
material and ends up always using GL_LINEAR. This patch makes the
paint functions assume the correct source is set up instead of trying
to select a new source.
2010-03-31 19:03:24 +01:00
Emmanuele Bassi
53cf25ef11 Add jhbuild moduleset
Clutter should provide a moduleset for JHBuild, to allow building the
whole Clutter stack within a separate prefix.
2010-03-31 16:31:10 +01:00
Owen W. Taylor
6fcc8c5bce x11: Use has_allocation() in TfP actor
ClutterX11TexturePixmap calls get_allocation_box() when queueing a
clipped redraw. If the allocation is not valid, and if we queue a
lot of redraws in response to a series of damage events, the net
result is that we spend all our time in a re-layout. We can
short-circuit this by checking if the actor has a valid allocation, and
if not, just queue a redraw - the actor will be allocated by the time it
is going to be painted.

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-03-26 00:46:43 +00:00
Owen W. Taylor
8df4a0b8fd actor: Add has_allocation() method
Add clutter_actor_has_allocation(), a method meant to be used when
deciding whether to call clutter_actor_get_allocation_box() or any
of its wrappers.

The get_allocation_box() method will, in case the allocation is invalid,
perform a costly re-allocation cycle to ensure that the returned box
is valid. The has_allocation() method is meant to be used if we have an
actor calling get_allocation_box() from outside the place where the
allocation is always guaranteed to be valid.

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-03-26 00:46:31 +00:00
Emmanuele Bassi
7483f82566 docs: Add 1.4 index to the API references
Now that master has branched for the 1.3 development cycle.
2010-03-25 09:45:59 +00:00
José Dapena Paz
7b63da69cf Add "homogeneous" mode to ClutterBoxLayout.
Added new "homogeneous" mode to ClutterBoxLayout, that makes layout children
get all the same size.

This is heavily inspired in the "homogeneous" attribute available in GtkBox,
but simplified as we don't have padding nor borders in box layout, only
spacing.

Also added to test-box-layout a key to set/unset homogeneous mode.

* Coding style fixes.
* Added proper test for homogeneous mode in box layout.
* Fix in homogeneous mode.

http://bugzilla.openedhand.com/show_bug.cgi?id=2034

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-03-25 09:41:54 +00:00
Emmanuele Bassi
5395a7a998 Use begin/end macros in cogl-primitives.h
Protect the people using a C++ compiler from the dark abyss of C code.

http://bugzilla.openedhand.com/show_bug.cgi?id=2049
2010-03-25 09:33:26 +00:00
Neil Roberts
6a8e108757 clutter-actor: Rename y1 to y_1 to avoid a compiler warning
Somebody somewhere decided it would be ok to define 'y1' as a global
function in math.h thus condemning us to repeatedly making commits to
fix these obnoxious compiler warnings about aliasing.
2010-03-24 15:32:28 +00:00
Adel Gadllah
5de85051c3 Make sure GLX_SGI_swap_control is set up correctly
glXSwapIntervalSGI only affects buffer swaps to the
current GLX drawable.

That means that calling it once in clutter_backend_glx_get_features
isn't sufficent, so set it up in clutter_backend_glx_ensure_context to
make sure it affects buffer swaps for the current drawable.

http://bugzilla.openedhand.com/show_bug.cgi?id=2044

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-03-22 11:23:55 +00:00
Owen W. Taylor
2fc8ecdb92 glx: Clean up the clip area conditions
Move the size check after the NULL check, add the clip height into the
check logic and fix up the comment.

http://bugzilla.openedhand.com/show_bug.cgi?id=2040

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-03-19 18:23:03 +00:00
Emmanuele Bassi
f935270aa0 script: Do not allocate memory when not needed
When printing out the property value during a ClutterScript debug run we
generate the value's content using g_strdup_value_contents() - though we
do it unconditionally. The contents might not be printed (they most
likely won't, actually) and will be freed afterwards. This is
unnecessary: we can allocate the contents string after checking if we're
going to print out the debug note, thus avoiding the whole
allocation/free cycle unless strictly needed.
2010-03-19 16:24:34 +00:00
Emmanuele Bassi
a39cef41b8 glx: Do not access stage_clip without checking it
The stage_clip parameter for add_redraw_clip() can be NULL, so we need
to check before accessing its members.
2010-03-19 11:41:12 +00:00
Owen W. Taylor
913c187f4e Switch texture units before calling _cogl_texture_set_filters()
When setting up the state for a layer, we need to switch texture
units before we do anything that might bind the texture, or
we'll bind the wrong texture to the previous unit.

http://bugzilla.openedhand.com/show_bug.cgi?id=2033

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-03-19 11:23:48 +00:00
Emmanuele Bassi
66e0f18753 json: Update JsonParser
Add another fix from upstream, to clean up the code.
2010-03-19 11:13:04 +00:00
Emmanuele Bassi
295bc517f8 json: Update the internal copy of JsonGenerator
The JsonGenerator we have inside Clutter as a fallback for a missing
system copy of JSON-GLib is way out of date.
2010-03-19 10:40:12 +00:00
Owen W. Taylor
d21b7522f8 Fix errors in keeping track of the stage bounding rectangle
* Add new clutter_geometry_union(), because writing union intersection
  is harder than it looks. Fixes two problems with the inline code in
  clutter_stage_glx_add_redraw_clip().

  1) The ->x and ->y of were reassigned to before using them to
     compute the new width and height.
  2) since ClutterGeometry has unsigned width, x + width is unsigned,
     and comparison goes wrong if either rectangle has a negative
     x + width. (We fixed width for GdkRectangle to be signed for GTK+-2.0,
     this is a potent source of bugs.)

* Use in clutter_stage_glx_add_redraw_clip()

* Account for the case where the incoming rectangle is empty, and don't
  end up with the stage being entirely redrawn.

* Account for the case where the stage already has a degenerate
  width and don't end up with redrawing only the new rectangle and not
  the rest of the stage.

The better fix here for the second two problems is to stop using a 0
width to mean the entire stage, but this should work for now.

http://bugzilla.openedhand.com/show_bug.cgi?id=2040

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-03-19 10:29:53 +00:00
Owen W. Taylor
bfd2b19290 Set pixel store parameters before calling glGetTexImage
We need to set up the rowstride and alignment properly in
CoglTexture2D before reading texture data.

http://bugzilla.openedhand.com/show_bug.cgi?id=2036

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-03-19 10:21:34 +00:00
Emmanuele Bassi
9e0385304f build: Mark --with-json=internal as experimental
The system JSON-GLib installation should be the preferred way of parsing
JSON in Clutter. The internal copy is limited by re-synchronization from
upstream, and by the fact that upstream contains a fork of GScanner that
allows parsing escaped UTF-8. We should warn users compiling Clutter
with the internal copy, just like we warn about the internal image
backend.
2010-03-18 20:36:02 +00:00
Emmanuele Bassi
e1ad78ee18 docs: Update the README
Add a "requirements" section and detail all the build requirements for
Clutter, depending on the platform.
2010-03-18 20:29:59 +00:00
Emmanuele Bassi
7e700be7b8 build: Require xcomposite
The X11TexturePixmap actor uses XComposite API directly, without guards.
It has been doing so for a while, against the fact that we do check for
the XComposite extension - but we don't depend on it. As soon as you try
building Clutter on X11 without the XComposite extension available all
hell breaks loose.

The obvious fix is to make Clutter depend on XComposite - basically
ratifying what's the current state of things.
2010-03-18 20:27:18 +00:00
Emmanuele Bassi
a8595aec13 script: Add more comments and annotations
Detail why we are adding a fake id, and under which circumstances that
happens. Also be more verbose with the debug annotations.
2010-03-18 20:20:09 +00:00
Emmanuele Bassi
203847d03c script: Skip empty nodes
If we get an empty node then we should skip it; this is really a
workaround for something that is broken in JSON-GLib or in our use
of JSON-GLib.
2010-03-18 17:44:14 +00:00
Emmanuele Bassi
d2bb57c3b2 Emit a critical warning if features are not initialized
If you forgot to call clutter_init() then you currently end up with a
warning saying that the stage cannot be initialized because the backend
does not support multiple stages. Clearly not useful.

We can catch some of the missing initialization in the features API,
since we will likely end up asking for a feature at some point.
2010-03-18 14:15:33 +00:00
Emmanuele Bassi
54504b7ac4 glx: Remove unnecessary call to create_stage()
If we are in the stage realization sequence we already have a GLX
context set in the backend; there is no need to call create_backend().
2010-03-17 17:41:52 +00:00
Emmanuele Bassi
bf7e6ae587 Add error reporting for create_context() failures
We kind of assume that stuff will break well before during the
ClutterBackend::create_context() implementation if we fail to create a
GL context. We do, however, have error reporting in place inside the
Backend API to catch those cases. Unfortunately, since we switched to
lazy initialization of the Stage, there can be a case of GL context
creation failure that still leads to a successful initialization - and a
segmentation fault later on. This is clearly Not Good™.

Let's try to catch a failure in all the places calling create_context()
and report back to the user the error in a meaningful way, before
crashing and burning.
2010-03-17 17:40:34 +00:00
Emmanuele Bassi
d735ac4807 model: Let get_n_columns() return a sane value
If you call get_n_columns() during the instance initialization phase but
before set_name()/set_types() have been called, you'll get a (guint) -1.
This is less than ideal.

If columns haven't been initialized we should just return 0, which was
the intent of the API since the beginning.

Based on a patch by: Bastian Winkler <buz@netbuz.org>

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-03-17 17:14:08 +00:00
Emmanuele Bassi
0a6497a3b6 model: Add a comment on the n_columns field type
To avoid another bug report like:

  http://bugzilla.openedhand.com/show_bug.cgi?id=2017

with a patch that gets applied without a proper review, resulting in a
bug like:

  http://bugzilla.openedhand.com/show_bug.cgi?id=2032

I should probably add a comment on why on earth we're using an integer
as the n_columns member of the ClutterModelPrivate structure, and why it
is important that it is initialized as -1.
2010-03-16 18:57:28 +00:00
Emmanuele Bassi
de4abfac95 Revert "model: Use guint for the n_columns field"
The int storage, and the initial value of -1, is used as a guard when
subclassing ClutterListModel to allow the sub-class to call
clutter_model_set_names() and clutter_model_set_types().

This reverts commit c274118a8f.
2010-03-16 18:53:24 +00:00