When setting an explicit transform with clutter_actor_set_transform()
and a non (0,0) pivot-point, clutter_actor_apply_transform() will fail
to roll back the pivot-point translation done before multiplying the
transformation matrix due to the "out:" label being slightly misplaced
in clutter_actor_real_apply_transform().
This works properly:
clutter_actor_set_pivot_point (actor, 0.5, 0.5);
clutter_actor_set_rotation_angle (actor, CLUTTER_Z_AXIS, 30);
This results in the actor being moved to the pivot-point position:
clutter_actor_set_pivot_point (actor, 0.5, 0.5);
clutter_matrix_init_identity(&matrix);
cogl_matrix_rotate (&matrix, 30, 0, 0, 1.0);
clutter_actor_set_transform (actor, &matrix);
This also add a conformance test checking that even when using a
pivot-point, no matter how a rotation is set the resulting
transformation matrix will be the same.
https://bugzilla.gnome.org/show_bug.cgi?id=690214
clutter_actor_allocate_preferred_size is supposed to use the fixed
position of an actor. Unfortunately, recent refactorings made it so
that it accidentally used the current allocation. As the current
allocation may be adjusted by the actor, or have been previously
allocated in a strange spot, it may have unintended side effects. Use
the fixed positioning of the actor instead.
This fixes weird issues with margins colliding with
ClutterFixedLayout, causing strange offsets on relayout.
https://bugzilla.gnome.org/show_bug.cgi?id=689316
When trying to clamp to pixel a box that is exactly in between 2
pixels, the clutter_actor_box_clamp_to_pixel() function changes the
size of the box.
Here is an example :
ClutterActorBox box = { 10.5, 10, 20.5, 20};
g_message ("%fx%f -> %fx%f", box.x1, box.y1, box.x2, box.y2);
clutter_actor_box_clamp_to_pixel (&box);
g_message ("%fx%f -> %fx%f", box.x1, box.y1, box.x2, box.y2);
Here is what you get :
** Message: 10.500000x10.000000 -> 20.500000x20.000000
** Message: 10.000000x10.000000 -> 21.000000x20.000000
That is because of the properties of the ceilf and floorf function
used to do the clamping.
For example, ceil(0.5) is 1.0, and ceil(-0.5) is 0.0.
And, floor(0.5) is 0.0, and floor(-0.5) is -1.0.
To work around that problem this patch retains the distance between x
and y coordinates and apply that difference before calling ceilf() on
x2 and y2.
https://bugzilla.gnome.org/show_bug.cgi?id=689073
The code for calculating the content box when the aspect ratio is
greater than 1 was broken. The same code that did the calculation for
aspect ratio less than 1 should be used in all cases.
Fixes: https://bugzilla.gnome.org/682161
When changing an implicit transition mid flight we may end up with an
easing state with a duration of zero milliseconds; this leads to the
implicit transition machinery setting the final state directly onto the
actor. If there is a running transition, though, we need to remove it
from the transitions table, otherwise it will keep running.
This regression happened when the update_transition() internal function
was merged into the create_transition() one.
Tested-by: Lionel Landwerlin <llandwerlin@gmail.com>
Only the signal connection. When using G_ENABLE_DIAGNOSTIC there will be
a warning for every signal connection.
We should try and discourage people from ever using the paint signal
ever again, until we can safely remove it in Clutter 2.0.
We cannot fully deprecate Geometry, because ClutterActor and ClutterText
are actually using the type in signals and properties; but we can
deprecate the API that uses this type, so that 2.0 will be able to avoid
it entirely.
The :clip property still uses ClutterGeometry, which is a very bad
rectangle type. Since we cannot change the type of the property
compatibly, we should introduce a new property using ClutterRect
instead. This also matches the ClutterActor.set_clip() API, which uses a
decomposed rectangle with floating point values, like we do with
set_position() and set_size().
We need to make sure that ClutterActor::transition-stopped is emitted
after the transition was removed from the actor's list of transitions.
We cannot just remove the TransitionClosure from the hash table that
holds the transitions associated to an actor, and let the
TransitionClosure free function stop the timeline, thus emitting the
::transition-stopped signal - otherwise, stopping the timeline will end
up trying to remove the transition from the hash table, and we'll get
either a warning or a segfault.
Since we know we're removing the timeline anyway, we can emit the signal
ourselves in case the timeline is playing, in both the implicit and
explicit cases.
The :transform property controls the modelview matrix of an actor; it
can be used to set a custom modelview matrix on the actor, as opposed
to the decomposed transformations (rotation, scaling, translation)
provided by the ClutterActor class.
The transitions we create implicitly should be removed from the set of
transitions associated to an actor; the transitions explicitly
associated to an actor, though, have to survive the emission of their
'stopped' signal.
We can remove the update_transition() private method, and move its
functionality inside the create_transition() private method, thereby
removing lots of duplicated code, as well as redundant checks on the
existence of a transition. This will allow handling transition updates
atomically in the future.
We use floorf() for the allocation origin, and ceilf() for the
allocation size. Swapping the two introduces rounding errors if
the original allocation is not clamped to the nearest pixel.
We need an alternative to the translation performed by the anchor point,
one that possibly applies to all three axes and is relative to the
pivot-point.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
For some transformations we need to be able to set the Z component of
the pivot point.
Unlike :pivot-point, the Z coordinate is not normalized because actors
are 2D surfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
Given that the rotation transformations are now affected by the pivot
point, the Actor class should provide an accessors pair only for the
angle of rotation on a given axis.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
The pivot point is a point in normalized coordinates space around which
all transformations revolve.
It supercedes the anchor point and the per-transformation center points
as well as the gravity settings, and tries to sort out the mess that
is the modelview matrix set up in ClutterActor.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
The ClutterActor:depth property has always been a bit of a misnomer:
actors are 2D flat surfaces, so they cannot have "depth"; the property
defines the position on the Z axis.
Another side effect of the :depth property is that it decides the
default paint and allocation order on insertion, and that setting it
will call the ClutterContainer.sort_depth_order() method. This has
proven to be a fairly bad design decision that we strung along from the
0.x days, as it gives a false impression of being able to change the
paint and allocation order simply by changing the position on the Z
axis — something that, in reality, requires depth testing to be enabled
during the paint sequence of an actor's parent.
For 2.0 we need a clean break from the side effects, and a better
defined interface.
ClutterActor:z-position is essentially what ClutterActor:depth is, but
doesn't call into ClutterContainer, and has a more apt name.
https://bugzilla.gnome.org/show_bug.cgi?id=679465
It can be useful to check whether a ClutterActorIter is currently valid,
i.e. if the iterator has been initialized *and* if the actor to which it
refers to hasn't been updated.
We can also use the is_valid() method in the conformance test suite to
check that initialization has been successful, and that changing the
children list through the ClutterActorIter API leaves the iterator in a
valid state.
The implicit animations only apply to properties that are documented as
'animatable'; the explicit animations apply to any property defined
through GObject or ClutterAnimatable.
For 1.x, we still have a duration of 0 msecs, but we have a valid easing
state, so we can change the easing parameters without calling save and
restore.
ClutterContent implementations may allow repeating their contents when
painting; we should provide the repeat policy on the actor, like we do
for scaling filters and content gravity.
Fixed positions are defined to be initialized at 0,0 whenever
enabled, by setting fixed_position_enabled to true, or by setting
just one of x/y. This normally happens in the defaults, but we need
to make sure it also happens if a fixed position was once set but
then disabled. We do this by always resetting it back to 0,0 when
fixed_position_set is unset.
