This commit completes the implementation of `xdg_wm_base` version 3,
which introduces support for synchronized implicit and explicit popup
repositioning.
Explicit repositioning works by the client providing a new
`xdg_positioner` object via a new request `xdg_popup.reposition`. If the
repositioning is done in combination with the parent itself being
reconfigured, the to be committed state of the parent is provided by the
client via the `xdg_positioner` object, using
`xdg_positioner.set__parent_configure`.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
This sets the `is_reactive` flag on the window placement rules, causing
the popups to be reconfigured as they are affected by environmental
changes, such as the parent moving in a way making the popup partially
offscreen.
As with synchronization, the implementation is dormant, as the
version of the advertised global isn't bumped yet, as the new protocol
version is not yet fully implemented.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
This commits adds support on the MetaWindow and constraints engine side
for asynchronously repositioning a window with a placement rule, either
due to environmental changes (e.g. parent moved) or explicitly done so
via `meta_window_update_placement_rule()`.
This is so far unused, as placement rules where this functionality is
triggered are not yet constructed by the xdg-shell implementation, and
no users of `meta_window_update_placement_rule()` exists yet.
To summarize, it works by making it possible to produce placement rules
with the parent rectangle a window should be placed against, while
creating a pending configuration that is not applied until acknowledged
by the client using the xdg-shell configure/ack_configure mechanisms.
An "temporary" constrain result is added to deal with situations
where the client window *must* move immediately even though it has not yet
acknowledged a new configuration that was sent. This happens for example
when the parent window is moved, causing the popup window to change its
relative position e.g. because it ended up partially off-screen. In this
situation, the temporary position corresponds to the result of the
movement of the parent, while the pending (asynchronously configured)
position is the relative one given the new constraining result.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
MetaGravity is an enum, where the values match the X11 macros used for
gravity, with the exception that `ForgetGravity` was renamed
`META_GRAVITY_NONE` to have less of a obscure name.
The motivation for this is to rely less on libX11 data types and macros
in generic code.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
A placement rule placed window positions itself relative to its parent,
thus converting between relative coordinates to absolute coordinates,
then back to relative coordinates implies unwanted restrictions for
example when the absolute coordinate should not be calculated againts
the current parent window position.
Deal with this by keeping track of the relative position all the way
from the constraining engine to the move-resize window implementation.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
To organize things a bit better, put the fields related to the placement
rule state in its own anonymous struct inside MetaWindow. While at it,
rename the somewhat oddly named variable that in practice means the
current relative window position.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
After popup placement rules have gone through the constraints engine has
ended up resulting in an actual move, pass the window configuration down
the path using relative coordinates, as that is what the next layer
(xdg-shell implementation) actually cares about.
In the future, this will also be helpful when the configured position is
not against the current state of the parent.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
A placement rule is always about placing a window relative to its
parent. In order to eventually place it against predicted future parent
positions, make the placement rule processing output relative
coordinates, having the caller deal with turning them into absolute.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
meta_window_wayland_finish_move_resize() inhibited window moves to be
finished if there was a resize grab active at the time, in order to
handle window resizing. Change this to only affect the grabbed window
itself, so that e.g. a popup can be positioned according to a pending
configuration while there is an active resize grab.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
This is made a signal, so the upper layers (read: gnome-shell) may
decide what services to spawn. The signal argument contains a task
that will resume MetaX11Display startup after it is returned upon.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/945
This is used by GDK and the X11 bits, but may also be used for
other initialization services we might need to run along with
Xwayland initialization.
However, as the -initfd argument in Xwayland is a fairly new
feature, add some meson build-time checks so that the feature
is handled transparently while allowing to explicitly set/unset
it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/945
This shape region culling was wrongly implemented in f5a28aa9, as it
does not take frame offsets into account, and is also redundant, as
we already set the opaque region of the underlying surface accordingly.
The other parts were implemented in ac7aa114, the reason given in
the commit message:
```
Wayland clients do this through the opaque region in the surface
actor. However X11 clients were considered fully transparent for
culling purposes, which may result in mutter painting other bits
of the background or other windows that will be painted over in
reality.
```
is wrong though - culling on X11 actors works just fine and did only
not work in Wayland sessions because of a bug that got fixed in
19814497.
In conclusion the whole part appears to be redundand and some testing
done suggests the same. Drop it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1082
If a opaque region is explicitly set we should not consider the surface
opaque, as that implies e.g. a shape region is set.
If no opque region is set but the texture does not have an alpha channel,
we can savely cull it out.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1082
We need the stencil buffer to consist of binary values of 0 and 1
because we're doing additions and subtractions on the buffer, so even
though this is the default, explicitely set the stencil mask to 0x1.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1096
When using a region clip and something has a rectangle clip pushed, a
special drawing method for ClutterTexts (emit_vertex_buffer_geometry()
in cogl-pango-display-list.c) starts to fail and clipping issues with
long texts (because emit_vertex_buffer_geometry() is only used for texts
longer than 25 characters) start to appear. This specifically happened
in Looking Glass, where the StViewport of the ScrollView sets a
rectangle clips and the texts are usually longer than 25 characters.
This is caused by the changing of the perspective and modelview matrix
when drawing to the stencil buffer and started happening when
region-clipping was introduced with commit 8598b654. Even though the
changing of the matrices was done before that, too, the issue probably
didn't happen because `rect->can_be_scissor` was TRUE and no stencil
buffer clipping was used at all.
To fix this, temporarily save the old matrices, then set the new ones
and restore the old ones when we're done drawing to the stencil buffer.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/2246https://gitlab.gnome.org/GNOME/mutter/merge_requests/1096
We want sysprof's exact datadir for compatability with
platforms where software is installed into their own
individual immutable prefix's. Such that, mutter's prefix will
never equate to sysprof's. This depends on a MR in sysprof [0]
which adds datadir to its pkgconfig files, as these files will always
have the proper path we want.
This adds version a constraint on sysprof_dep, as datadir was added to
the .pc in this version.
[0]: https://gitlab.gnome.org/GNOME/sysprof/merge_requests/19https://gitlab.gnome.org/GNOME/mutter/merge_requests/957
Given that on Wayland we are pretty much guaranteed to finish MetaX11Display
setup after the MetaCompositor is enabled, we may drop the
meta_compositor_manage() x11 initialization bits, and move them into the
MetaX11Compositor subclass where it's actually needed.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
We artificially made Xwayland initialization synchronous, as we used
to rely on MetaX11Display and other bits during meta_display_open().
With support for Xwayland on demand and --no-x11, this is certainly
not the case.
So drop the main loop surrounding Xwayland initialization, and turn
it into an async operation called from meta_display_init_x11(). This
function is turned then into the high-level entry point that will
get you from no X server to having a MetaX11Display.
The role of meta_init() in Xwayland initialization is thus reduced
to setting up the sockets. Notably no processes are spawned from here,
deferring that till there is a MetaDisplay to poke.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
This ATM completes the task right away, but we will want to do
further things here that are asynchronous in nature, so prepare
for this operation being async.
Since the X11 backend doesn't really need this, make it go on
the fast lane and open the MetaX11Display right away, the case
of mandatory Xwayland on a wayland session is now handled
separately.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
With Xwayland initialization going async, these errors will seep
into the parts controlled by g_test*(), resulting in the harmless
errors about DBus names not acquired turned fatal.
Set an error log handler, and specifically ignore those.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
It might not be available right on initialization time if X11 is started
asynchronously. As this is a requirement for our tests, ensure it is there
before proceeding with the test.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
This used to be set on meta_compositor_manage(), but only if there is a
MetaX11Display. Given meta_display_init_x11() is Wayland only, and we can
always assume compositing to be enabled, just have it invariably set after
the X server is up.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
Even though cogl_framebuffer_flush() was supposed to be enough,
it ends up creating streams with odd visual glitches that look
very much like unfinished frames.
Switch back to cogl_framebuffer_finish(), which is admittedly
an overkill, but it's what works for now. There is anedoctal
evidence showing it doesn't incur in worse performance.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1086
Much like monitor streaming, implement window streaming by
making the window actor draw itself with a paint context
that used the passed framebuffer.
Now that all MetaScreenCastStreamSrc subclasses implement
blit_to_framebuffer, remove the conditional check from
meta_screen_cast_stream_src_blit_to_framebuffer().
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1086
Implement PipeWire's add_buffer and remove buffer, try and export
a DMA buffer first and, on failure, fallback to memfd.
When DMA buffers are successfully created and shared, blit the
framebuffer contents when drawing instead of downloading the pixels.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1086
Create a new gbm_bo using the same given geometry, and export the new
bo's DMA buffer fd. The new bo lives as long as necessary to be used,
and reused, by PipeWire.
Unfortunately, PipeWire doesn't support modifiers properly, so use the
linear format for now. For now, a hardcoded format of DRM_FORMAT_XRGB8888
is set, so we don't need to negotiate the format with PipeWire early.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1086
This is a winsys-specific API that allows exporting a DMA buffer fd.
The CoglDmaBufHandle structure allows passing the ownership of the
DMA buffer to whoever is using it, so the winsys doesn't need to
manually track it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1086
In future patches, we'll create additional CoglFramebuffers that
will be shared via DMA-Buf with PipeWire. When recording frames,
we'll blit the current onscreen framebuffer into the shared one.
However, that presents a problem: cogl_framebuffer_blit() mimics
glBlitFramebuffer() semantics, and doesn't do an implicit flush
of the GPU command stream. As a consequence, clients may receive
unblitted or incomplete framebuffers.
We could use cogl_framebuffer_finish() to ensure the commands were
submitted to the GPU, but it is too harsh -- it blocks the CPU
completely until the commands are finished!
Add cogl_framebuffer_flush(), which ensures the command stream is
submitted to the GPU without blocking the CPU. Even though we don't
use the framebuffer specifically, it may be useful in the future
for e.g. a potential Vulkan backend to have access to the framebuffer.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1086
If the cursor sprite does not match the scale factor or transformation
of the monintor, we currently fall back to a software cursor, causing
redraws of the shell. This commit implements scaling and transforming
of the cursor sprite, so we can use it with hardware planes, too.
This commit does the following steps:
1. Make sure we reupload the cursor image if the cursor is over
a logical monitor not matching the scale or transform from the previous
update.
2. Before upload to the hardware plane, scale and transform the cursor
image if possible and necessary.
3. Make sure we always use the hardware cursor if possible (only fall
back to software/OGL cursor if it is visible on multiple logical monitors
with differet scales/transforms).
4. Transform or scale the cursor coordinates if necessary.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/526
