Put the conditions for enabling a pointer constraint in a helper
function, and use that in both maybe_enable() and maybe_remove(). The
constraint region checking is still only done in maybe_enable()
however.
This changes the conditions for maybe disabling the constraint on focus
change and other trigger points, namely it makes constraints by Xwayland
not disable when they shouldn't due to the constraining window being an
override-redirect window.
https://bugzilla.gnome.org/show_bug.cgi?id=771859
When the grab is cancelled, for example because of an Alt-tab, VT
switch etc, disable or remove (depending on the constraint type) the
constraint. This avoids a re-entry issue when the focus is returned and
the focus listener tries to re-enable a disabled constraint.
https://bugzilla.gnome.org/show_bug.cgi?id=771859
Dismiss the popup when the grab is cancelled, so that if the grab is
ended for whatever reason (such as VT switching or the last pointer
being disconnected), it doesn't try to end the grab when it isn't
active.
This fixes a crash when VT switching back and forth while a popup grab
is active.
https://bugzilla.gnome.org/show_bug.cgi?id=771858
Previously a grab could suddenly end without the grabber knowing
anything about it. Some grabs assume they won't suddenly end without
notice, and can use then new 'cancel' vfunc to be notified.
Currently a grab is cancelled when a new one is started (i.e. in
meta_wayland_pointer_grab_start()), when a non-popup compositor wide
event route is initiated, and when the seat looses the pointer
capability.
https://bugzilla.gnome.org/show_bug.cgi?id=771858
Instead of using meta_wayland_pointer_end_grab() which focuses the new
grab, add a new helper mean to be used to reset the grab state without
changing the pointer focus. When using this function, the call site is
supposed to explicitly manage focus.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
Make the caller of focus setting check whether there is a pointer to
update the focus state of. It makes it more obvious what to expect, as
the call would be a no-op in when no pointer is present.
Grabbing is still allowed without the presence of a pointer because it
is used by popups even on touch-only systems.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
Make the caller of focus setting and grab starting check whether there
is a keyboard to update the focus state or start grabbing. It makes it
more obvious what to expect, as the call would be a no-op in when no
keyboard is present.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
The variable name 'l' usually refers to a GList iterator, but here it's
just a short hand for a specific list. Stop using this shorthand, since
it just makes it harder to read what list is used.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
The order doesn't only affect the visual layout, but also which action
cancels the dialog (and therefore responds to Escape). It is completely
surprising that this triggers a destructive action like force-quit, so
swap the actions to wait when the dialog is cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=737109
GNOME Shell's window matching currently fails frequently with Flatpak
applications, as one of the primary hints used to link windows with
.desktop files - the WM_CLASS - no longer matches when flatpak renames
the exported .desktop file. Luckily, Flatpak provides us with a fail-safe
way to map from the PID to the corresponding application ID, so expose an
appropriate method that allows GNOME Shell to reliably match windows to
the corresponding Flatpak app.
https://bugzilla.gnome.org/show_bug.cgi?id=772614
In order to kill a window, on both X11 and wayland we first try to
kill(3) the corresponding process, so we can add the newly added
get_client_pid() method to share that code.
https://bugzilla.gnome.org/show_bug.cgi?id=772613
It is often useful to identify the client process that created
a particular window, however the existing meta_window_get_pid()
method relies on _NET_WM_PID, which is only available on X11 and
depends on applications to set it correctly (which may not even
be possible when the app runs in its own PID namespace as Flatpak
apps do). So add a get_client_pid() method that uses windowing
system facilities to resolve the PID associated with a particular
window.
https://bugzilla.gnome.org/show_bug.cgi?id=772613
Previously the focus was reset implicitly by a memset() on the whole
MetaWaylandPointer struct. When MetaWaylandPointer was turned into a
GObject, this was not possible any more, and the focus was not updated
properly.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
Going through the global mode pool and then checking if the mode is
available for a given output is pointless work since we can look at
the output's available modes directly.
This implicitly changes how we choose the default mode since, instead
of relying on the sort order of the global modes array, we now rely on
the sort order of the output modes array. Still not ideal, but at
least it makes more sense since the global array is essentially
unsorted.
https://bugzilla.gnome.org/show_bug.cgi?id=772176
This isn't technically needed and, in fact, makes us default to
interlaced modes in some cases which isn't desirable.
Note that X doesn't account for these flags either for its mode
refresh rates.
https://bugzilla.gnome.org/show_bug.cgi?id=772176
As the m format specifier doesn't consume any arguments, the number
of varargs currently doesn't match the number of specifiers; the
failed transform may be relevant, so include it in the message
instead of removing the excess argument.
There may be other windows managing selection whose events are seen in
our GDK event filter, like st-clipboard in gnome-shell, we should in
that case not interfere on Selection/SelectionRequest events that are
not meant for us.
This fixes an odd feedback loop where requesting clipboard contents from
wayland results in a XConvertRequest call and a SelectionRequest event
that is interpreted by mutter as a request from another X11 client, so
the current data source is poked for content, which happens to be the
X11 bridge, which does a XConvertRequest to get contents... This is only
broken after the many nested async operations create enough pipes and
cancellables to run out of fds.
Adding checks to ensure only events meant to our "selection owner"
window are managed prevent this unintended loop to happen in the first
place.
https://bugzilla.gnome.org/show_bug.cgi?id=760745
backends/meta-input-settings.c:1245:27: error: format '%lx' expects
argument of type 'long unsigned int', but argument 3 has type 'guint64
{aka long long unsigned int}' [-Werror=format=]
Those will be unseen by g-s-d/g-c-c, so no settings will be written on
disk for those. Still, look up an ID correctly in this case instead of
crashing.
https://bugzilla.gnome.org/show_bug.cgi?id=771628
When we mess with a window actor's visibility from the shell side
(yes, I know :-( ), we should at least restore the proper visibility
when we're done with it ...
https://bugzilla.gnome.org/show_bug.cgi?id=771536
A xdg_popup, when active, always has a parent surface. However, a popup
created may immediately become invalid, for example when it is not
granted a grab, in which case it won't be assigned a parent since it
will never be mapped.
This case needs to be handled elsewhere, as one cannot assume a
MetaWaylandXdgPoup that is processed (via wl_surface commit handling
etc) will have a parent_surface.
https://bugzilla.gnome.org/show_bug.cgi?id=771495
If a X11 client would initiate a Xdnd session after it had lost pointer
focus (for example when the Xdnd event starting the drag happens after
the implicit pointer grab is already broken due to the button being
released), just end the drag operation instead of dereferencing the
non-existing focus surface.
Also avoid using a native Wayland surface as a drag origin, as that can
never happen, but allow any arbitrary Xwayland client, since there is
no way to find out the actual drag origin.
https://bugzilla.gnome.org/show_bug.cgi?id=770940
We cannot check 'has-target' or 'has-seat' when verifying a
wl_data_offer.finish request is valid or not, since the source may have
effected 'has-target' or whether theh source has a seat or not when the
finish request was already on the wire.
Instead of checking against the source state, keep track whether the
required operations has been done on the offer in question (i.e.
whether an action has been sent, or a mime type been accepted).
This fixes incorrectly raised error when dragging from gtk+'s testdnd
via Xwayland onto gtk+'s testdnd using Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=770937
Since wl_surface.set_buffer_transform() is not supported, until it is
added, pretend outputs are never transformed, so that clients are less
likely to attach pre-transformed buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=770672
Also maybe remove a constraint when the pointer focus changes. This is
needed because when Xwayland has a constraint focus may change, the
constraint object will not receive a 'appears-focused' event on its
window since it never changed.
This happens for example when an override-redirect window (which never
appears focused) holds the constraint, and alt-tab happens. In this case
focus changes, but from the constraint's point of view, none of the
windows it knows about changed its focus appearance.
https://bugzilla.gnome.org/show_bug.cgi?id=771345
Instead of initializing the default grab when the device class is
enabled, initialize it on object initialization. This way other device
classes can still grab the pointer, as if there was one. This may be
useful for example if a touch grab is active and a mouse is connected.
This also makes it possible for popup grabs, which currently use a
pointer grab for controlling, to be triggered by touch devices, while
still holding an active pointer grab.
https://bugzilla.gnome.org/show_bug.cgi?id=771305
Make the device <-> seat association permanent, and move it into
MetaWaylandInputDevice. A device will never be disassociated with a
seat, so there is no point in unsetting it.
https://bugzilla.gnome.org/show_bug.cgi?id=771305
Add a new object class, MetaWaylandInputDevice, and make all device
classes (pointer, keyboard, touch) inherit it. In the future common
functionality may be placed there.
https://bugzilla.gnome.org/show_bug.cgi?id=771305
Meant to replace explicitly checking whether a
MetaWaylandPointer/MetaWaylandKeyboard/MetaWaylandTouch has a seat or
not to determine whether they are supposed to be active or not.
https://bugzilla.gnome.org/show_bug.cgi?id=771305
This is needed to make the wayland backend react to configuration
changes until gnome-control-center is updated to use the
gsettings-desktop-schemas settings.
https://bugzilla.gnome.org/show_bug.cgi?id=771315
Some output devices only advertise their preferred mode even though
they're able to display others too. This means we can include some
common modes in each output's supported list.
This is particularly important for mirroring, since we can only mirror
outputs which are using the same resolution.
https://bugzilla.gnome.org/show_bug.cgi?id=744544
Since Xwayland surface constraints might need to enable not only
because the constrained window appears focused, add a pointer focus
listener and try constrain whenever the pointer focus changes. It's
still required that a Xwayland window is focused to activate.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
Xwayland surfaces are special, because there is no reliable way to
associate a window with its corresponding "application window" (the one
which was given focus). Many games that require pointer warping and
confining pointer grabs may for example create override redirect windows
and make that window receive input even though it will never be the
focus window.
Therefore, the requirements for enabling a constraint for a wl_surface
from Xwayland needs to be relaxed in order. This commit changes
Xwayland wl_surfaces to not require being focused to be enabled; it'll
be enabled as long as any X11 window is the one with focus.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
Require pointer focus to enable, otherwise we can't guarantee it has
entered the surface, as the focus may have been given to a subsurface,
override-redirect or other sub window covering the surface that was
requested to have o pointer constraint.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
Add a signal that is emitted when the pointer focus surface of the
pointer device changes. This will later be used by the pointer
constraints to maybe enable pointer constraints when a surface receives
pointer focus.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
For Xwayland, a newly created wl_surface and X11 Window pair may not be
immediately associated, but Xwayland may still request a pointer
constraint on some of its wl_surface's. Handle the situation by
postponing maybe enabling the constraint until the window and surface
has been associated.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
Move the MetaWaylandSurface::destroy signal before starting the actual
destruction, in wl_surface_destructor, so that all fields (e.g. surface
role) are intact when the listeners are invoked.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
When the Xwayland wl_surface is created, it may not yet be possible to
associate it with the corresponding X11 Window. Add a signal to the
Xwayland role to communicate with any interested parties.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
If a client would attach a buffer to a surface, commit, destroy the
buffer and then later set the surface as a cursor, there will be no
wl_buffer available to be used by the cursor role. Instead of
dereferencing the non-existing wl_buffer resource, handle this situation
by logging a warning and treating a prematurely destroyd wl_buffer as if
no buffer had been attached.
https://bugzilla.gnome.org/show_bug.cgi?id=770992
Not having a surface actor would cause the window actor state to be
considered frozen, thus causing various state (such as geometry, shape
etc) synchronization to be delayed until thawed. If the window actor
was "thawed" due to having a surface set, not all state would be
properly synchronized, causing the thawed window actor to be displayed
incorrectly.
This patch fixes this by putting state synchronization after thawing in
a common function, calling it both from frozen count decreasing and
surface setting.
This fixes for example misplaced menus in Steam.
https://bugzilla.gnome.org/show_bug.cgi?id=770991
Implement min/max size request from xdg-shell-v6 and plug it into the
existing code so that windows with fixed size cannot be tiled/maximized
in Wayland just like in X11.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=770226
The seat capability updating is synchronous, but input events are
asynchronous (first queued then emitted). This means we may end up in a
situation where we from libinput first may receive a key event,
immediately followed by a device-removed event. Clutter will first
queue the key event, then remove the device, immediately triggering the
seat capability removal.
Later, when the clutter stage processes the queued events, the
previously queued key event will be processed, eventually making it
into MetaWaylandSeat. Before this patch, MetaWaylandSeat would still
forward the key event to MetaWaylandKeyboard, even though it had
'released' it. Doing this would cause referencing potentially freed
memory, such as the xkb state that was unreferenced when the seat
removed the capability.
In order to avoid processing these lingering events, for now, just drop
them on the floor if the capability has been removed.
Eventually, the event queuing etc needs to be redesigned to work better
when used in a Wayland compositor, but for now at least don't access
freed memory.
https://bugzilla.gnome.org/show_bug.cgi?id=770727
When a modal transient is unmanaging, most likely the parent of the
modal transient should be focused.
In Wayland, a MetaWindow is created when a shell surface role (like
xdg_toplevel) is created, but a window cannot be shown until a buffer
is attached. If a client would create two modal transients and make
them both have the same parent, but only one get a buffer attached
(i.e. shown), when unmanaging the modal transient that was showing,
when finding a new focus candidate, the stacking code will ignore the
not-to-be-shown buffer-less modal transient when finding a good
candidate for focusing. In the case described here, this means it will
find the parent of the unmanaging modal transient.
This newly chosen candidate will then be passed to meta_window_focus();
meta_window_focus() will then try to find any modal transient to focus
instead, will find the one without any buffer, then fail to focus it
because it cannot be mapped, thus making meta_window_focus() not focus
anything. Since meta_window_focus() didn't change any focus state, the
assert in meta_window_unmanage() checking that the unmanaging window
isn't focused anymore will be hit, causing mutter to abort.
For now, fix this by checking whether the modal transient can actually
be focused in meta_window_focus(). For X11 client windows, a window
will be defined to be focusable always, but for Wayland client windows,
a window will be determined focusable only if it has a buffer attached.
In the future, we should probably do a more thorough refactorization of
focus handling to get rid of any X11 - Wayland differences.
https://bugzilla.gnome.org/show_bug.cgi?id=757568
We may be assigned multiple times, if the surface is assigned to be a
cursor surface multiple times. Each time e.g. wl_pointer.set_cursor is
called, we'll be assigned.
While the role object exists, we'll handle buffer use count even when
we are not actively assigned, thus we should only handle the initial
assignment use count bump when constructing, so that we don't increase
it when reassigned, where the wl_resource may already have been
released.
https://bugzilla.gnome.org/show_bug.cgi?id=770402
For backend handled cursors, if nothing else changes on the clutter
stage, we end up not sending out frame callbacks since clutter doesn't
draw a new frame.
To fix this, we'll keep cursor surfaces' frame callbacks separate from
other surfaces' and trigger them from the new
MetaCursorRenderer::cursor-painted signal which handles both software
and hardware cursors.
https://bugzilla.gnome.org/show_bug.cgi?id=749913
This signal allows interested parties to be notified of a new cursor
frame being painted regardless of whether it's being painted by the
backend directly or if it's a software rendered cursor frame handled
by clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=749913
Instead of hiding stage views enablement behind MUTTER_STAGE_VIEWS=1,
default to enable it, while making it possible to disable using
MUTTER_STAGE_VIEWS=0 instead.
https://bugzilla.gnome.org/show_bug.cgi?id=770366
Even without a compositor grab, key events may still be expected to
be processed by the compositor and not applications, for instance
when using ctrl-alt-tab to keynav in the top bar. On X11, focus is
moved to the stage window in that case, so that events are processed
before they are dispatched by the window manager. On wayland, we need
to handle this case ourselves, so make sure to not pass key events to
wayland in that case, and move the key focus back to the stage when
appropriate.
https://bugzilla.gnome.org/show_bug.cgi?id=758167
Switch to the output naming logic used by the X server's modesetting
driver which, in particular, uses drmModeConnector's connector_type_id
instead of connector_id.
The kernel generates new connector_id's every time there are changes
which means we can't identify the same monitor on the same connector
after an hardware hotplug. Switching to connector_type_id fixes this.
https://bugzilla.gnome.org/show_bug.cgi?id=770338
If cogl fails to create a texture from the client's given buffer,
mutter would raise a fatal error and terminate.
As a result, a broken client might kill gnome-shell/mutter and take the
entire Wayland session with it.
Instead of raising a fatal error in this case, log the cogl error
message and send the client an OOM error, so mutter/gnome-shell can
survive an unsupported buffer size.
https://bugzilla.gnome.org/show_bug.cgi?id=770387
For some reason, when a modal dialog was made an attaching
transient-for, if the window wasn't "constructing", it would be
unmanaged and rely on some side effect to be recreated. This side
effect is not triggered for Wayland clients, thus if one happen to set
a surface as "modal" via gtk_surface.set_modal before
xdg_toplevel.set_parent, it'd be unmanaged and never show up.
Instead, simply just set the tranciency anyway for Wayland clients.
This makes GTK+ clients that set_modal() before set_transient_for()
work.
https://bugzilla.gnome.org/show_bug.cgi?id=770324
Windows from Xwayland still needs to use the Wayland path, but is
represented an MetaWindowX11, thus the abstraction introduced in
"window: Make meta_window_has_pointer() per protocol implemented"
is wrong. Lets turn back time, and reconsider how this can be
abstracted more correctly in the future.
This reverts commit 9fb891d216.
Rely on the actor surface role's commit function for queuing frame
callbacks. This also makes the surface actor state synchronization work
again, which was broken by 'wayland: Sync surface actor state in actor
role commit handler'.
https://bugzilla.gnome.org/show_bug.cgi?id=770131
Don't check whether the surface of the role has a window, but whether
the corresponding toplevel surface has a window. This is necessary to
make subsurfaces not always early out.
https://bugzilla.gnome.org/show_bug.cgi?id=770131
There is nothing stopping a subsurface from commiting its state before
its parents role has been assigned. Thus, we need to handle
meta_wayland_surface_get_toplevel() returning NULL for subsurfaces even
on commit.
Make sure to always call the parent role commit vfunc, so that they can
handle updating their state properly.
This means other places need to handle the situation where
surface->window is NULL on commit. This may for example happen when the
parent of a modal dialog is unmapped or NULL is attached to a
wl_shell_surface.
https://bugzilla.gnome.org/show_bug.cgi?id=769936
Port the xdg_shell implementation to use the unstable v6 protocol. This
includes:
- making xdg_surface a generic base interface for xdg_shell surface
roles
- create a xdg_toplevel role replacing the old xdg_surface
- change the xdg_opup role to be based on xdg_surface
- make xdg_popup not grab by default
- add support for xdg_positioner
https://bugzilla.gnome.org/show_bug.cgi?id=769936
Emit a 'configure' signal before configuring the role. This will enable
extensions to send its own configure events before the role is
configured.
https://bugzilla.gnome.org/show_bug.cgi?id=769936
Add support for assigning a window a custom window placement rule used
for calculating the initial window position as well as defining how a
window is constrained.
The custom rule is a declarative rule which defines a set of parameters
which the placing algorithm and constrain algorithm uses for
calculating the position of a window. It is meant to be used to
implement positioning of menus and other popup windows created via
Wayland.
A custom placement rule replaces any other placement or constraint
rule.
https://bugzilla.gnome.org/show_bug.cgi?id=769936
Allow passing parameters (only GObject parameters supported for now) so
that role assignment can affect the paremeters set during construction.
If a role was already assigned when assigning, the passed parameters
are set using g_object_set_valist().
https://bugzilla.gnome.org/show_bug.cgi?id=769936
Instead of piping the protocol file content to wayland-scanner, pass
the file name as an argument. This enables a new enough wayland-scanner
to print more meaningful error messages.
https://bugzilla.gnome.org/show_bug.cgi?id=769936
We can only honor this properly in the MUTTER_STAGE_VIEWS=1 case. When using
the legacy view, software implemented transforms are only exposed if there is
only one output, as we can only transform the entire stage there.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
The texture is only created if the view is transformed at the software level,
otherwise the texture is NULL, and rendering happens on the onscreen.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
The offscreen is given through the ::back-buffer property, the ClutterStageView
will set up the the CoglPipeline used to render it back to the "onscreen"
framebuffer.
The pipeline can be altered through the setup_pipeline() vfunc, so ClutterStageView
implementations can alter the default behavior of blitting from offscreen to
onscreen with no transformations.
All getters of "the framebuffer" that were expecting to get an onscreen have
been updated to call the right clutter_stage_view_get_onscreen() function.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
The call to _cogl_framebuffer_winsys_update_size() results in no-op here,
as the framebuffer has already the right size when rebuilding the views.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
Those will need a separate treatment from the modes that we eventually
support through "software", so split those into a separate enum so we
can can do the right thing when applying the configuration.
Also, add a helper function that returns the transform that the software
fallbacks should perform, which should be "normal" if the rotation is
already handled via hw.
The function applying the configuration has been modified to always set
a HW rotation mode (even if normal), when we come to support SW rotation
modes, we'll be relying on a normal transformation, so it will be
necessary to have mixed HW/SW managed transforms.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
This commits adds support for exporting xdg_surface handles via
xdg_exporter and importing them via xdg_importer.
This bumps the required wayland-protocols version to 1.6.
https://bugzilla.gnome.org/show_bug.cgi?id=769786
Meant to be used by users of MetaWaylandSurface's that need to know
when the surface was unmapped. So far only emitted by shell surfaces
(surfaces with MetaWindow's).
https://bugzilla.gnome.org/show_bug.cgi?id=769786
As whether edge scrolling is enabled depends on whether two-finger
scrolling is disabled, make sure to update two-finger scrolling first.
Note that this only fixes the problem on startup. Changing the
settings in GSettings directly might cause an inconsistent state, but
the main UI for this setting, gnome-control-center, makes sure to
update two-finger scrolling before edge scrolling.
https://bugzilla.gnome.org/show_bug.cgi?id=769276
An empty argument list means "unspecified arguments", and not
"no arguments" like it does in C++. If an implementer of Mutter
plugins uses gcc -Wold-style-definition, as configured by
AX_COMPILER_FLAGS_CFLAGS, they will get warnings about this.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Florian Müllner <fmuellner@gnome.org>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=769971
The scale will have been set to 1 no matter what when initializing the
MetaOutput since it at the time didn't have an CRTC assigned to it.
Now, when we assign the CRTC to the output, we need to update the scale.
https://bugzilla.gnome.org/show_bug.cgi?id=769505
We do some things when binding to a socket fails (closing the fd,
logging, unlinking files, ...) those might affect errno in some
or other way, so it might no longer be EADDRINUSE even if we later
try to make those non fatal.
It seems better to check errno soon after the failure, and don't
rely on it in any way at a later point. All error paths in
bind_to_abstract_socket() also have early logging, which also might
help figure out better the point of failure when the socket fails
to be created.
https://bugzilla.gnome.org/show_bug.cgi?id=769578
Allocate the offscreen stage view framebuffers up front; otherwise they
may get allocated after the viewport calculated by the stage is set,
which would cause the viewport to be incorrect until recalculated.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Support changing the mouse and trackball acceleration profile. This
makes it possible to for example disable pointer acceleration by
choosing the 'flat' profile.
This adds an optional dependency on gudev. Gudev is used by the X11
backend to detect whether a device is a mouse or not. Without gudev
support, the accel profile settings has have effect for mouse devices.
Trackball still uses the "strstr" approach, since udev doesn't support
tagging devices as trackball devices yet.
https://bugzilla.gnome.org/show_bug.cgi?id=769179
Add support for setting edge-scrolling separately from two-finger
scrolling. We now have 2 separate boolean settings for those, with the
Mouse panel in gnome-control-center allowing to set only one of those at
a time, but nothing precludes both being set in the configuration.
We need to handle:
- two-finger-scrolling-enabled and edge-scrolling-enabled settings both
being set.
- those 2 settings being change out-of-order
- two-finger-scrolling being set on a device that doesn't support it
- edge-scrolling-enabled on a device that doesn't support it
And the combinations of one touchpad supporting just one of edge
scrolling and two-finger scrolling and another vice-versa.
https://bugzilla.gnome.org/show_bug.cgi?id=768245
Instead of continuing eventually crashing with a segmentation fault due
to a missing renderer, make MetaBackend an GInitable, and gracefully
handle the failure to fully create the backend with an EXIT_FAILURE.
https://bugzilla.gnome.org/show_bug.cgi?id=769036
We only use a handful of the attributes set, so lets stop pretending
that things are initialized for a reason. Eventually we should stop
using XWindowAttributes in the generic MetaWindow creation path.
https://bugzilla.gnome.org/show_bug.cgi?id=769070
If the compiler cannot figure out that the condition for setting
the dev variable is the same as the condition for accessing it,
it will complain about potential uninitialized use.
We must lookup the mode switch serial for the group where the button
belongs to. Also, avoid the changes if the client requests setting
the feedback for buttons owned by the compositor.
We assumed that each group could only have 1 strip and/or ring, because
accounting is performed per group, so we could not assume the real
index for anything above 1. Get rid of this restriction, now that
MetaWaylandTabletPad does its own accounting of rings/strips, alongside
groups.
This is best for 2 reasons:
- It's feels cleaner doing first creation of rings/strips and then
the group assignment. The other option is making groups iterate
other all rings/strips and selectively skip those not meant for
it, which sounds somewhat redundant.
- Some minimal accounting of rings/strips without group restrictions
is needed for meta_wayland_tablet_pad_get_label().
The rings/strips memory is now owned by MetaWaylandTabletPad instead
of groups, which is sort of meaningless since all are meant to go
at the same time.
There may be external/compositor-specific reasons to trigger the
pad OSD. Expose this call so the pad OSD can be triggered looking
up the right settings, monitor, etc...
This API will be used from the gnome-shell pad OSD implementation, in order
to show the actions that currently apply to every button/ring/strip in the
tablet.
It does nothing at the moment, but can be hooked into MetaWaylandTabletPad
now. For X11, we need to trigger these for the pad events we receive from
the passive pad button grabs.
This function will be useful for the wayland implementation, because buttons
are mapped at the time of sending those through the wire.
As x11/wayland implementations differ here, this function will be useful for
the wayland implementation, as the action is handled lat
Some settings make no sense on external tablets, and others make
no sense in display/system-integrated tablets. Perform those checks
so we don't end up with possibly broken configuration.
Given that information defines largely how such devices are to be
configured, it makes sense to have that information at hand. A getter
has been also added for the places where it could be useful, although
it will require HAVE_LIBWACOM checks in callers too.
All pads will share the same focus than the keyboard, so this means that:
- The focus changes in-sync for keyboard and all pad devices, and
- Newly plugged pads will be immediately focused on that same surface
This object represents the collection of buttons, strips and rings
in a tablet pad. All the objects created (pad, strips and rings)
share a common focus surface and have the same lifetime.
This is now separated from the generic cursor one. This means that wl_surfaces
can't be shared across wl_pointer and wp_tablet_tool. This is a change in
tablet protocol v2.
This is a simple subclass of MetaWaylandSurfaceRoleCursor, mostly
so we can distinguish by GType, the methods in the parent class
still apply and are useful.
When launching a GNOME session from a text-mode VT, the logind session
type is unlikely to be set to either "wayland" or "x11". We search for a
supported session type first with logind and then with
$XDG_SESSION_TYPE. As a fallback, we also test $DISPLAY in case of a
"tty" logind session to support starting through xinit. Ideally, such
setups should set XDG_SESSION_TYPE=x11.
If no supported session type is found, we throw an error.
https://bugzilla.gnome.org/show_bug.cgi?id=759388
They are already effectively interchangeable so this should reduce
pointless casts.
Just like in GDK though, we need to keep the old definition for
instrospection to be able to include the struct's fields.
By creating a pending gbm/EGL surface pair, only setting it on
swap-buffers, we would draw onto a buffer on the old surface, then swap
the buffer from the new surface, causing the first frame after a
hot-plug always having no content.
This was in the past not very noticable since some non-deterministic but
frequent side effect in gnome-shell caused hot-plugging to always render
two new frames, but after "Introduce regional stage rendering", this
side effect did not occur as often, thus making it more visible.
This commit updates the current gbm/EGL surface pair before painting a
frame, so that when the frame is painted, the surface with the correct
size is used and the buffer from correct surface is swapped.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Being a listener to a signal, it is inconvenient to enforce order of
execution between different signal listeners. If there are things in
the backend that should be updated before various other signal
handlers, make sure so is done by emitting the signal after having
explicitly notified the backend.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
CoglFrameInfo is a frame info container associated with a single
onscreen framebuffer. The clutter stage will eventually support drawing
a stage frame with multiple onscreen framebuffers, thus needs its own
frame info container.
This patch introduces a new stage signal 'presented' and a accompaning
ClutterFrameInfo and adapts the stage windows and past onscreen frame
callbacks users to use the signal and new info container.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Call a CoglContext "cogl_context", CoglDisplay "cogl_display" and
CoglRenderer "cogl_renderer" so that they won't be confused with
ClutterContext, MetaDisplay and MetaRenderer etc.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Make the cogl vfunc functions have names that are globally
discoverable. Calling the same function in every backend the same name
causes code navigation tools to not function properly. Rename the
affected functions to closer correspond to the style mutter uses.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Add support for drawing a stage using multiple framebuffers each making
up one part of the stage. This works by the stage backend
(ClutterStageWindow) providing a list of views which will be for
splitting up the stage in different regions.
A view layout, for now, is a set of rectangles. The stage window (i.e.
stage "backend" will use this information when drawing a frame, using
one framebuffer for each view. The scene graph is adapted to explictly
take a view when painting the stage. It will use this view, its
assigned framebuffer and layout to offset and clip the drawing
accordingly.
This effectively removes any notion of "stage framebuffer", since each
stage now may consist of multiple framebuffers. Therefore, API
involving this has been deprecated and made no-ops; namely
clutter_stage_ensure_context(). Callers are now assumed to either
always use a framebuffer reference explicitly, or push/pop the
framebuffer of a given view where the code has not yet changed to use
the explicit-buffer-using cogl API.
Currently only the nested X11 backend supports this mode fully, and the
per view framebuffers are all offscreen. Upon frame completion, it'll
blit each view's framebuffer onto the onscreen framebuffer before
swapping.
Other backends (X11 CM and native/KMS) are adapted to manage a
full-stage view. The X11 CM backend will continue to use this method,
while the native/KMS backend will be adopted to use multiple view
drawing.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
