This launches Xvfb, using xvfb-run, and inside tests the following:
1. Launching 'mutter --x11' works
2. Launching a couple of X11 clients works (doesn't crash or result in
warnings)
3. Launching 'mutter --x11 --replace' works
4. Terminating works
It does this using a simple shell script.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2434>
This adds a minimalistic fullscreen direct scanout test case, that runs
on vkms. It doesn't use EGL, and it uses uninitialized memory, thus it
lacks any kind of implicit synchronization, but it does test that the
scanout selection paths are working.
What is tested is:
* DMA buffer allocated using gbm on top of VKMS
* Buffer passes a mode setting TEST_ONLY check
* Paint is omitted
* Correct buffer active in KMS after presentation
What isn't yet tested:
* Implicit synchronization related behavior
* Presented pixel content
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2417>
It works by using an X11 client to set the clipboard content, using a
mimetype that on purpose is not handled by the clipboard manager. The
test then makes sure we don't crash when trying to transfer data from
the old X11 selection source.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2364>
The Xwayland server can go away at any time; when this happen we might
have a test client running, and for it to tear down more nicely, make
sure to avoid trying to clean up X11 resources on the old X11 display.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2364>
This will allow us to reuse the keys and values more easily, as later
commits will rely on being able to iterate over the keys and values to
construct explict env strings for passing into special test cases.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2152>
This test resizes the stream by updating the PipeWire stream properties.
This triggers a format negotiation, that results in the buffers being
reallocated with the new size. The test makes sure we eventually
receive this new size.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2270>
This implements the new 'bounds' event that is part of the xdg_toplevel
interface in the xdg-shell protocol. It aims to let clients create
"good" default window sizes that depends on e.g. the resolution of the
monitor the window will be mapped on, whether there are panels taking up
space, and things like that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2167>
Structure tests in a list of dictionaries, instead of requiring each
test to have its own executable(...) and test(...) statement. The
intention of this is to make it easier to add more test cases.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2262>
It already was built into it without any symbols exported, but also
duplicated in test cases that used it. Make it so that the built in
functions are exported, with prefixes, and make all tests use the
exported functions. While at it, make things go via MetaContext or
MetaBackend depending on how early in initialization things are run.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2262>
Since we want these accessed from bindings this must be a boxed
type. This has the side effect of making ClutterGrab a refcounted
object, since we want to avoid JS from pointing to freed memory
and maybe causing crashes if misusing the object after dismiss.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2099>
This is (luckily!) unused, and it's inconvenient to have a toggle to
break the input model we are striving towards. Drop this function
and stick to the default behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2099>
Adding a <dbus/> element containing a boolean (yes/no) determines
whether org.gnome.Mutter.DisplayConfig ApplyMonitorsConfig will be
callable. The state is also introspectable via the
ApplyMonitorsConfigAllowed property on the same interface.
For example
<monitors version="2">
<policy>
<dbus>no</dbus>
</policy>
</monitors>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2030>
The test aims to verify that setting the following policy
<policy>
<stores>
<store>system</store>
</stores>
</policy>
only applies monitor configurations from the system level.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2030>
This adds a way to define a way, at the system level, to define a policy
of how monitor configuration files are loaded.
The intended use case is to e.g. either prefer system level monitor
configurations before user levels, or only allow system level
configurations.
Examples:
Prefer system over user level configurations:
<monitors version="2">
<policy>
<stores>
<store>system</store>
<store>user</store>
</stores>
</policy>
<configuration>
...
</configuration>
</monitors>
Only allow system level configurations:
<monitors version="2">
<policy>
<stores>
<store>system</store>
</stores>
</policy>
<configuration>
...
</configuration>
</monitors>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2030>
The way device backends implement power saving differ, and power saving
needs to contain nothing incompatible in the same update. Make it
impossible to e.g. mode set, page flip, etc while entering power save by
not using MetaKmsUpdate's at all for this.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2159>
When we're predicting state, i.e. when having posted an update while
avoiding reading KMS state, copy the predicted state, update the actual
state, and check that the predicted state matches the newly updated one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2159>
As other KMS tests, depends on being DRM master and vkms being loaded.
Currently consists of a sanity check that checks for the expected set of
connectors, CRTCs, planes, etc.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2159>
It tests that if we go from (x is the pointer cursor)
+--------+
| |
| X |
+--------+
to
+----------------+
| |
| |
+--------+ |
| | |
| X | |
+--------+----------------+
i.e. making sure that X ends up somewhere within the logical monitor
region.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2237>
These will be skipped by default, but can be run from a TTY for easier
debugging by doing:
dbus-run-session -- meson test -C build --suite mutter/native/tty --setup plain
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2151>
This commit makes it possible to run test executables in a test
environment constructed of a virtual machine running the Linux kernel
with the virtual KMS driver enabled, and a mocked system environment
using meta-dbus-runner.py/python-dbusmock.
The qemu machine is configured to use 256M of memory, as the default
128M was not enough for the tests to pass.
Using qemu is also only made possible on x86_64; more changes are needed
for it to be runnable on aarch64, so add a warning if it was enabled on
any other architecture.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2151>
This is needed if one wants to run the test suite parts that need KMS or
evdev access in a virtual machine.
However, only initiate these methods if the meta-dbus-runner.py program
was launched with --kvm, as it's only suitable for using while running
as root in a virtual machine.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2151>
There will be another mode added later, 'test'; prepare for this by
changing the existing "mode" boolean ('headless') to a mode, which is
either 'default' or 'headless'. Checking the is_headless variable is
changed to using the function is_headless(), except for one place, being
VT switching, which in preparation is only allowed on the 'default'
mode. Other places where it makes sense, the conditions are changed to
switch statements.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2151>
The final tick of a timeline is >= its duration, but when using ticks that
are slightly in the future ("next presentation time") this means the final
tick will execute and complete the timeline up to one frame interval before
the timestamp of that final tick.
For the single clock test we now just check if the overall duration is
within one frame of the expected timeline duration.
The dual clock (switching) test needs a threshold of two frames because
starting each new clock creates a phase shift (error) of up to one frame.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2161>
When checking panel orientation on logical monitors we should take
panel orientation transform to check it's properly applied, so ensure
that we're checking the right one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2090>
Change to use the headless backend with a virtual monitor, instead of
the nested backend. This means tests can create and use virtual input
devices, which isn't possible with the nested backend.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1993>
The roundtrip in the handle-configure function could in theory (and in
practice in the future) happen to receive another configure event. If we
send yet another invalid geometry the second time, we log one time too
many in the server, which fails the test. Avoid this by ignoring the
second configure event; it's enough to pass through the error handling
path once.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1993>
We created pipes for the stdout of the spawned mock services. This
resulted in the pipe being filled if enough things were logged, as
nothing was reading from it. Change this to allow for two modes:
verbose - where output is logged to the parent stderr, as well as non-verbose
(default) - where things are logged directly to /dev/null.
This fixes frozen tests when running with --repeat and a high enough
repeat count.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2139>
This test is injecting input events without checking the correct stage/
device state. Wait for the pointer to enter the stage, so the event gets
correctly forwarded across.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
A client can create a token without any seat, serial, or surface. In
this case, we'd still try to grab, which would run into some unforseen
code paths, potentially resulting in the following crash:
0) meta_wayland_tablet_seat_device_added (tablet_seat=0x55dff4271c90,
device=0x7f87b80655b0) at
../src/wayland/meta-wayland-tablet-seat.c:200
1) meta_wayland_tablet_seat_new (seat=0x0, manager=0x55dff3ec7b40) at
../src/wayland/meta-wayland-tablet-seat.c:283
2) meta_wayland_tablet_manager_ensure_seat (manager=manager@entry=0x55dff3ec7b40,
seat=seat@entry=0x0) at
../src/wayland/meta-wayland-tablet-manager.c:239
3) meta_wayland_tablet_manager_ensure_seat (seat=0x0, manager=0x55dff3ec7b40) at
../src/wayland/meta-wayland-touch.c:595
4) meta_wayland_seat_get_grab_info (seat=0x0, surface=0x55dff43ff5b0,
serial=0, require_pressed=0, x=0x0, y=0x0) at
../src/wayland/meta-wayland-seat.c:479
5) activation_activate (...) at
../src/wayland/meta-wayland-activation.c:261
Fix this by not trying to grab if not enough parameters was passed when
creating the token. Also add a test case that reproduces the above
crash.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2081>
This test ensures that windows that were resized such that they extend
beyond the screen will be moved to be fully on the screen (if possible).
This has been working on X11 since forever, but on Wayland only since
the last commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2103>
The 'stop_after_next' will execeute one command, then not return to the main
loop until a 'continue' command is passed. Commands will still be
processed between 'stop_after_next' and 'continue'.
This is intended to be used to induce race conditions.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2066>
Because POSIX sh was, with hindsight, not a particularly well-designed
programming language, if we don't 'set -e', then we'll respond to failure
of a setup command such as cd by carrying on regardless.
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2009>
The assumption here seems to be that it's an overlay onto the
current environment which would make sense; but the implementation in
gnome-desktop-testing currently removes all other environment variables
(see GNOME/gnome-desktop-testing#1). This causes test failure when the
tests are run in Debian's autopkgtest framework, possibly because PATH
is cleared.
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2009>
If one would end up with an actor attached to mapped actor, where the
attached actor doesn't itself have an up to date stage view list while
listening on the stage for updating, when clearing the stage views of
the list, anything that would query the stage views list at this time
would end up accessing freed memory.
This could happen if
1) An actor was added to a newly created container actor attached to
the stage
2) The actor got a timeline attached to it
3) The actor was moved to a container that already was mapped
4) A hotplug happened
After (1) both the container and actor would not have any stage views.
After (2) the timeline would listen on the stage for stage views
updates. After (3) the actor would still listen on the stage for stage
views updates. When (4) happened, the actor would be signalled when the
stage got its stage view cleared, at which point it would traverse up
its actor's tree finding an appropriate stage view to base its animation
on. The problem here would be that it'd query the already mapped
container and its yet-to-be-cleared stage view list, resulting in
use-after free, resulting in for example the following backtrace:
0) g_type_check_instance_cast ()
1) CLUTTER_STAGE_VIEW ()
2) clutter_actor_pick_frame_clock ()
3) clutter_actor_pick_frame_clock ()
4) update_frame_clock ()
5) on_frame_clock_actor_stage_views_changed ()
6) g_closure_invoke ()
7) signal_emit_unlocked_R ()
8) g_signal_emit_valist ()
9) g_signal_emit ()
10) clear_stage_views_cb ()
11) _clutter_actor_traverse_depth ()
12) _clutter_actor_traverse ()
13) clutter_actor_clear_stage_views_recursive ()
14) clutter_stage_clear_stage_views ()
...
Avoid this issue by making sure that we don't emit 'stage-views-changed'
signals while the actor tree is in an invalid state. While we now end up
traversing tree twice, it doesn't change the Big-O notation. It has not
been measured whether this has any noticible performance impact.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1950
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2025>
The monitor orientation tests do a lot of things in sequence. Replace
some of the comments with g_test_message() so that the log from a failed
test gives us a better idea of how far we got.
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2049>
Previously, we were waiting up to 300ms for the signal, then proceeding
anyway. However, 300ms is not necessarily long enough to wait on an
autobuilder that might be heavily loaded, particularly if it's a non-x86
with different performance characteristics.
Conversely, if mutter responds to the D-Bus signal from the mock sensor
before we have connected to the signal, then we cannot expect to receive
the signal - it was already emitted, but we missed it. In this case, we
need to avoid waiting.
One remaining use of wait_for_orientation_changes() that would previously
always have timed out was in
meta_test_orientation_manager_has_accelerometer(), which does not
actually expect to see an orientation-changed signal. Make this wait
for the accelerometer to be detected instead.
Resolves: https://gitlab.gnome.org/GNOME/mutter/-/issues/1967
Bug-Debian: https://bugs.debian.org/995929
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2049>
It was a feature relevant for when Clutter was an application toolkit
that wanted the application window to communicate a minimum size to the
windowing system.
Now, clutter is part of the windowing system component, so this feature
doesn't make any sense, so remove it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2002>
This feature was configured depending on whether the Cogl backend
reported COGL_WINSYS_FEATURE_MULTIPLE_ONSCREEN or not. All cogl backends
do report this, so any code handled the 'static' case were never used.
While we only ever use one stage, it's arguable more correct to
consilidate on the single stage case, but multiple stages is something
that might be desirable for e.g. a remote lock screen, so lets keep this
logic intact.
This has the side effect of completely removing backend features, as
this was the only left-over feature detection that they handled.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2002>
This one is a trivial wrapper around clutter_actor_get_children(), so just
use that in the two places where clutter_container_get_children() is used,
and remove clutter_container_get_children().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2057>
When a test failed, an exception would be raised. This meant that the
mocked service would stay alive, and the test case being run eventually
failing due to a timeout, not the failure itself.
Fix this by catching the exception during the test, ensuring that we
tear down properly, then re-raise the same exception again after having
teared down.
This avoids the dead lock, while still printing the appropriate error
message.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2008>
In X11 when we switch to another tty all the the signals are blocked (as
the display fd is not replying back to polling, causing the main loop to
stop), and they are all handled once we switch back to the tty.
This is not a problem for most of external events, but in case of
accelerometer changes, once we reactivate a mutter session we'll get
them all together, causing lots of monitor reconfigurations leading to
black screen for some seconds and most of the times to a wrong
configuration being applied.
To avoid this, batch all these events using an idle to only apply the
last one we got in a loop.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1217
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1233>
Create a test system bus and use it to run all the tests, add a mock
SensorsProxy (via dbusmock template) server that implements the
net.hadess.SensorProxy interface.
To make testing easier, the service is created on request of a proxy for
it, whose lifetime controls the mock service lifetime as well.
This is done using a further mock service that is used to manage the
others, using python-dbusmock to simplify the handling.
Add basic tests for the orientation manager.
As per the usage dbusmock, we're now launching all the tests under such
wrapper, so that local dbus environment won't ever considered, and
there's no risk that it may affect the tests results both locally and in
CI.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1233>
When we get an orientation event we don't care about keeping track of the
configuration changes, but actually we can consider the new configuration
just a variant of the previous one, adapted to floating device hardware
events, so we only want to apply it if possible, but we don't want to keep
a record of it for reverting capabilities.
Doing that would in fact, break the ability of reverting back to an actual
temporary or persistent configuration.
For example when device orientation events happen while we're waiting for
an user resolution change confirmation, we would save our new rotated
configuration in the history, making then impossible to revert back to
the original persistent one.
So in such case, don't keep track of those configurations in the history,
but only keep track of the last one as current, checking whether the
new current is child or sibling of the previously one.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1221
Related to: https://gitlab.gnome.org/GNOME/mutter/-/issues/646
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1233>
and the subsurface was not previously detached from it using
`wl_subsurface_destroy()`.
Without 'window-actor/wayland: Remove subsurface actors on dispose' this
test would fail.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1958>
Monitor configuration check tests can be very complex and in case of
failures we can't easily catch where a failure happened without entering
in debug mode, something that isn't always an option in CI or external
builders.
So add more debug statements in configuration check functions and use
macros to ensure that we print the caller function and location on more
complex check functions.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/522>
Verify that the suggested monitor configuration contains only adjacent monitors,
and that if this is not the case we fallback to the linear configuration.
This can happen in case of multi-DPI setup, so add a test checking this too.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/522>
With some resolutions (such as 4096x2160) we may compute duplicated
scale factors because we used a too wide threshold to check for an
applicable value.
In fact, while when we're at the first and last values it's fine to
search applicable values up to SCALE_FACTORS_STEP, on intermediate ones
we should stop in the middle of it, or we're end up overlapping the
previous scaling value domain.
In the said example in fact we were returning 2.666667 both when
looking to a scaling value close to 2.75 and 3.00 as the upper bound of
2.75 (3.0) was overlapping with the lower bound of 3.0 (2.75).
With the current code, the lower and upper bounds will be instead 2.875.
Adapt test to this, and this allows to also ensure that we're always
returning a sorted and unique list of scales (which is useful as also
g-c-c can ensure that this is true).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1878>
Scaling values computation code served us well in the past years but
it's quite delicate and it has some issues in edge cases, so add a test
that verifies that the computed scaling values for all the most common
resolutions (and some that may be common in future) are what we expect
to be.
This may also serve us in future when we'd define a better algorithm to
compute the preferred scale, but this not the day.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1878>
