Adds basic support for the "wheel" event from the Wayland tablet protocol.
Ideally we would accumulate the angle and report a wheel event with an
appropriate value for "clicks". We can get away with a much cruder method
for the time being, however, since no Wacom tablet puck actually provides
a smooth scrollwheel. Checking whether the angle in CLUTTER_INPUT_AXIS_WHEEL
exceeds a nominally-small threshold is sufficient to determine that the
wheel has advanced by at least one physical click.
https://bugzilla.gnome.org/show_bug.cgi?id=783716
These events will be useful on gnome-shell UI, so translate the
4-5 button events with exotic axes to those. Also use the
XI_Motion event received when first touching those to reset
the ring/strip state, so we don't receive spurious direction
changes in the upper layers.
https://bugzilla.gnome.org/show_bug.cgi?id=782033
These should be set one, but just set the master to be the slave
pad device. We are passively grabbing the pad device, so this is
consistent with active grabs on slave devices. Besides, pads are
paired to the VCP, which is not really truthful.
Fixes inoffensive warnings when trying to check whether motion
throttling applies for these events.
https://bugzilla.gnome.org/show_bug.cgi?id=784881
Commit 0fd9e38175 fixed setting the out parameter for the x coordinate
when using the X11 backend, but broke compilation when the backend is
not available ...
Really fix the issue by running the X11-specific code when the X11
backend is available and in use, and display the one-time warning
otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=781902
Due to an accidental swap of an else statement and a preprocessor #else,
the output x coordinate is currently only set when not using the X11
windowing system, whoops.
https://bugzilla.gnome.org/show_bug.cgi?id=781902
Clutter's evdev input backend has no support for setting double
click timeout set by gnome-settings-daemon. This results in
touchpad click events timing out on wayland, because the
default timeout value wasn't enough.
This patch moves timeout setting to mutter and removes X11
backend specific setting from clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=771576
This will be used to invert the transform in the nested mode, making it
possible to test offscreen texture based transform using the nested
backend.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
In order to minimize the amount of breakage, while at the same time
making it easier to make backward incompatible changes needed to
continue turning libmutter into a capable Wayland compositor, make the
libmutter and friends (libmutter-clutter, libmutter-cogl*) parallel
installable by adding a version number to the name. This changes
various filenames, for example what previously was libmutter.so is now
libmutter-0.so (assuming the version for now is 0), and
libmutter-clutter-1.0.so is now libmutter-clutter-0.so. The pkg-config
filenames and GObject introspection has been renamed to reflect this as
well.
This enables a downstream compositor rely on a specific version of the
libmutter API, while gracefully handling API/ABI changes by having to
update to the new version at their own pace.
https://bugzilla.gnome.org/show_bug.cgi?id=777317
When != 0, this property will express the W:H ratio of the desired
output area (be it one monitor or the span of all monitors). At
the time of translating coordinates, coordinates will be skewed so
that the input area of the tablet is a rectangle of the given ratio.
Events happening in the input areas that fall outside the output
aspect ratio will be clamped to the nearest coordinate in the rect.
If the ratio is 0, the whole input area of the tablet will be used
and no coordinate skewing will happen.
https://bugzilla.gnome.org/show_bug.cgi?id=774115
And transform absolute events using this matrix. This property is
akin to the "Coordinate Transformation Matrix" property in X11,
and will be used to map tablets/touchscreens to outputs, favoured
over the libinput matrix which is meant for calibration.
https://bugzilla.gnome.org/show_bug.cgi?id=774115
Clutter assumed seat0 which is most usually, but not always correct.
Add an evdev-backend specific function to allow passing the seat
that will be used for ClutterDeviceManager construction, which we
already obtain in MetaLauncher.
https://bugzilla.gnome.org/show_bug.cgi?id=778092
Since both the libinput event source and the key repeat timer have the
same priority, the order in which both handlers are called is
arbitrary if both sources are ready on the same poll return. This
means that sometimes we generate key repeats when there's already a
real key event queued on libinput that would cancel the repeat timer
if only it was processed before.
One solution would be lowering the repeat timer source priority a
notch lower than the libinput source but that would mean that a steady
stream of events from libinput (e.g. pointer device motion) would
prevent any key repeats to happen.
Instead, we can fix this problem by trying to dispatch libinput from
the key repeat timer and checking if the timer source has been
destroyed before generating more key repeats.
https://bugzilla.gnome.org/show_bug.cgi?id=774989
Commit 9214d5029c changed the notify*
API to use microseconds and we already have a microsecond time source
here so we can use the timestamp directly without losing resolution at
this layer.
https://bugzilla.gnome.org/show_bug.cgi?id=774989
This is implemented using Wacom-driver specific properties at
the moment, until libinput becomes the fallback driver handling
tablet and pad management.
Whenever a tool becomes in proximity, a new ClutterInputDeviceToolXI2
will be created (if it wasn't created previously) for the given
serial number. This tool will be set in all events send from the
device.
https://bugzilla.gnome.org/show_bug.cgi?id=773779
Stylus configuration (stylus buttons, pressure) was handled
at the very high level, doing the button and pressure translations
right before sending these to wayland clients.
However, it makes more sense to store these settings into the
ClutterInputDeviceTool itself, and have clutter apply the config
at the lower level so 1) the settings actually apply desktop-wide,
not just in clients and 2) X11 and wayland may share similar
configuration paths. The settings are now just applied whenever
the tool enters proximity, in reaction to
ClutterDeviceManager::tool-changed.
This commit moves all handling of these two settings to
the clutter level, and removes the wayland-specific paths
https://bugzilla.gnome.org/show_bug.cgi?id=773779
We do so whenever a tool enters or leaves proximity. We now also
ensure that last_tool is NULL after it leaves proximity, although
the CLUTTER_PROXIMITY_OUT event itself should still contain tool
information.
https://bugzilla.gnome.org/show_bug.cgi?id=773779
We most notably handle button events (acquired through a passive grab on
all device buttons) which are translated to CLUTTER_PAD_BUTTON* events,
so there is generic handling of pad actions on X11.
https://bugzilla.gnome.org/show_bug.cgi?id=773779
Commit 5fbb479301 was wrong too. What we
really want to do here is getting view relative coordinates given the
view's and the rectangle's global coordinates so we need to subtract
the view's origin from the rectangle's.
https://bugzilla.gnome.org/show_bug.cgi?id=771502
Commit a4fb7ef5a3 dropped translations of our internal cogl/clutter
forks, which broke the local-based text direction support. Instead
of bringing back translations just for this purpose, we can re-use
GTK's translations which use the same technique.
https://bugzilla.gnome.org/show_bug.cgi?id=771549
Now with the existance of offscreen view framebuffers the buffer age
damage regions are only valid if the view in question doesn't doesn't
have an intermediate offscreen. So, for views that doesn't have buffer
age, return the dirty pixel (0,0).
https://bugzilla.gnome.org/show_bug.cgi?id=770672
When blitting an offscreen onto an onscreen, the whole offscreen should
always be drawn on the whole onscreen. Thus, don't try to convert
between coordinate spaces, just draw the whole offscreen on the whole
onscreen.
https://bugzilla.gnome.org/show_bug.cgi?id=770672
Clutter discards any motion event if next event happens to also be a
motion event. This is problematic when the motion event carries
relative motion deltas, since the information about them is completely
lost.
Until we have moved away made the stage stop discarding motion events,
lets work around the issue by compressing them, effectively adding
multiple relative motion deltas together, would one be discarded.
https://bugzilla.gnome.org/show_bug.cgi?id=771049
The rectangle passed to capture_view() is in stage coordinate space;
thus, to translate to framebuffer coordinate space, the origin need to
be translated by the view layout position.
This fixes capturing views not at position (0, 0).
https://bugzilla.gnome.org/show_bug.cgi?id=770127
Absolute pointer events used the X coordinate as both X and Y. This
caused the pointer cursor to be moved incorrectly for absolute pointer
devices, commonly used in virtual machines.
https://bugzilla.gnome.org/show_bug.cgi?id=770557
