mutter/Makefile.am

52 lines
977 B
Makefile
Raw Normal View History

Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
SUBDIRS = deps test-fixtures
# Until we can bump the cogl soname cogl-path is built as
# a noinst_LTLIBRARY and linked into libcogl.so so it needs
# to be built before cogl...
if BUILD_COGL_PATH
SUBDIRS += cogl-path
endif
SUBDIRS += cogl
if BUILD_COGL_PANGO
SUBDIRS += cogl-pango
endif
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
if BUILD_COGL_GLES2
SUBDIRS += cogl-gles2
endif
if BUILD_COGL_GST
SUBDIRS += cogl-gst
endif
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
SUBDIRS += tests examples doc po build
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
ACLOCAL_AMFLAGS = -I build/autotools ${ACLOCAL_FLAGS}
2011-05-06 07:26:15 -04:00
EXTRA_DIST = \
README.in \
VS 2008/2010 project files to build Cogl These are the VS 2008/2010 project files to build Cogl, with a README.txt to explain the process involved. Note that the Cogl and Cogl-Pango projects (and filters for VS2010) are expanded with the correct source file listings during "make dist", which is done to simplify maintenance of these project files. -added preconfigured config.h(.win32.in), which is expanded with the correct versioining info during autogen -added preconfigued cogl/cogl-defines.h.win32 -added symbols files for cogl and cogl-pango -Have configure.ac expand the config.h.win32.in into config.h.win32 with the correct versioning info, etc, and to include the Visual C++ project files for distribution -Added rules in cogl/Makefile.am to expand the cogl VS 2008/2010 projects and filters from the templates with up-to-date source file listings, to distribute cogl-enum-types.c, cogl-enum-types.h to ease compilation and to avoid depending on PERL on Windows installations. -Added rules in cogl-pango/Makefile.am to expand the cogl-pango VS2008/ 2010 projects and filters from the templates with up-to-date source file listings. -Added/edited various Makefile.am's in build to distribute the VS2008/2010 project files and associated items required for the build. -Update .gitignore. There needs to be a pre-configured config.h(.win32) and its template, config.h.win32.in for Visual C++ builds https://bugzilla.gnome.org/show_bug.cgi?id=650020 Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-05-12 05:06:32 -04:00
config-custom.h \
config.h.win32 \
config.h.win32.in
# .changelog expects these to be initializes
CLEANFILES=
DISTCLEANFILES=
DISTCHECK_CONFIGURE_FLAGS = \
--enable-gtk-doc \
--enable-maintainer-flags \
--enable-profile \
--enable-gles1 \
--enable-gles2 \
--enable-gl \
--enable-xlib-egl-platform \
--enable-wayland-egl-platform \
--enable-glx \
--enable-wayland-egl-server \
--enable-cogl-gst
include $(top_srcdir)/build/autotools/Makefile.am.release