mutter/cogl/cogl-bitmap.h

311 lines
9.1 KiB
C
Raw Normal View History

/*
* Cogl
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* A Low Level GPU Graphics and Utilities API
*
* Copyright (C) 2007,2008,2009 Intel Corporation.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*
*/
#if !defined(__COGL_H_INSIDE__) && !defined(COGL_COMPILATION)
#error "Only <cogl/cogl.h> can be included directly."
#endif
#ifndef __COGL_BITMAP_H__
#define __COGL_BITMAP_H__
Add _primitive_draw to replace _framebuffer_draw_primitive When splitting out the CoglPath api we saw that we would be left with inconsistent drawing apis if the drawing apis in core Cogl were lumped into the cogl_framebuffer_ api considering other Cogl sub-libraries or that others will want to create higher level drawing apis outside of Cogl but can't use the same namespace. So that we can aim for a more consistent style this adds a cogl_primitive_draw() api, comparable to cogl_path_fill() or cogl_pango_show_layout() that's intended to replace cogl_framebuffer_draw_primitive() Note: the attribute and rectangle drawing apis are still in the cogl_framebuffer_ namespace and this might potentially change but in these cases there is no single object representing the thing being drawn so it seems a more reasonable they they live in the framebuffer namespace for now. Note: the cogl_framebuffer_draw_primitive() api isn't removed by this patch so it can more conveniently be cherry picked to the 1.16 branch so we can mark it deprecated for a short while. Even though it's marked as experimental api we know that there are people using the api so we'd like to give them a chance to switch to the new api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 418912b93ff81a47f9b38114d05335ab76277c48) Conflicts: cogl-pango/cogl-pango-display-list.c cogl/Makefile.am cogl/cogl-framebuffer.c cogl/cogl-pipeline-layer-state.h cogl/cogl2-path.c cogl/driver/gl/cogl-clip-stack-gl.c
2013-07-09 18:47:29 -04:00
/* XXX: We forward declare CoglBitmap here to allow for circular
* dependencies between some headers */
typedef struct _CoglBitmap CoglBitmap;
#include <cogl/cogl-types.h>
#include <cogl/cogl-buffer.h>
Change API so that CoglPixelBuffer no longer knows its w/h/format The idea is that CoglPixelBuffer should just be a buffer that can be used for pixel data and it has no idea about the details of any images that are stored in it. This is analogous to CoglAttributeBuffer which itself does not have any information about the attributes. When you want to use a pixel buffer you should create a CoglBitmap which points to a region of the attribute buffer and provides the extra needed information such as the width, height and format. That way it is also possible to use a single CoglPixelBuffer with multiple bitmaps. The changes that are made are: • cogl_pixel_buffer_new_with_size has been removed and in its place is cogl_bitmap_new_with_size. This will create a pixel buffer at the right size and rowstride for the given width/height/format and immediately create a single CoglBitmap to point into it. The old function had an out-parameter for the stride of the image but with the new API this should be queriable from the bitmap (although there is no function for this yet). • There is now a public cogl_pixel_buffer_new constructor. This takes a size in bytes and data pointer similarly to cogl_attribute_buffer_new. • cogl_texture_new_from_buffer has been removed. If you want to create a texture from a pixel buffer you should wrap it up in a bitmap first. There is already API to create a texture from a bitmap. This patch also does a bit of header juggling because cogl-context.h was including cogl-texture.h and cogl-framebuffer.h which were causing some circular dependencies when cogl-bitmap.h includes cogl-context.h. These weren't actually needed in cogl-context.h itself but a few other headers were relying on them being included so this adds the #includes where necessary. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-25 15:04:45 -05:00
#include <cogl/cogl-context.h>
#include <cogl/cogl-pixel-buffer.h>
#ifdef COGL_HAS_GTYPE_SUPPORT
#include <glib-object.h>
#endif
COGL_BEGIN_DECLS
#ifdef COGL_HAS_GTYPE_SUPPORT
/**
* cogl_bitmap_get_gtype:
*
* Returns: a #GType that can be used with the GLib type system.
*/
GType cogl_bitmap_get_gtype (void);
#endif
/**
* SECTION:cogl-bitmap
* @short_description: Functions for loading images
*
* Cogl allows loading image data into memory as CoglBitmaps without
* loading them immediately into GPU textures.
*
* #CoglBitmap is available since Cogl 1.0
*/
/**
* cogl_bitmap_new_from_file:
* @filename: the file to load.
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 14:28:27 -04:00
* @error: a #CoglError or %NULL.
*
* Loads an image file from disk. This function can be safely called from
* within a thread.
*
* Return value: (transfer full): a #CoglBitmap to the new loaded
* image data, or %NULL if loading the image failed.
*
* Since: 1.0
*/
CoglBitmap *
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
cogl_bitmap_new_from_file (const char *filename,
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 14:28:27 -04:00
CoglError **error);
#if defined (COGL_ENABLE_EXPERIMENTAL_API)
/**
* cogl_bitmap_new_from_buffer:
* @buffer: A #CoglBuffer containing image data
* @format: The #CoglPixelFormat defining the format of the image data
* in the given @buffer.
* @width: The width of the image data in the given @buffer.
* @height: The height of the image data in the given @buffer.
* @rowstride: The rowstride in bytes of the image data in the given @buffer.
* @offset: The offset into the given @buffer to the first pixel that
* should be considered part of the #CoglBitmap.
*
* Wraps some image data that has been uploaded into a #CoglBuffer as
* a #CoglBitmap. The data is not copied in this process.
*
* Return value: (transfer full): a #CoglBitmap encapsulating the given @buffer.
*
* Since: 1.8
* Stability: unstable
*/
CoglBitmap *
cogl_bitmap_new_from_buffer (CoglBuffer *buffer,
CoglPixelFormat format,
int width,
int height,
int rowstride,
int offset);
Change API so that CoglPixelBuffer no longer knows its w/h/format The idea is that CoglPixelBuffer should just be a buffer that can be used for pixel data and it has no idea about the details of any images that are stored in it. This is analogous to CoglAttributeBuffer which itself does not have any information about the attributes. When you want to use a pixel buffer you should create a CoglBitmap which points to a region of the attribute buffer and provides the extra needed information such as the width, height and format. That way it is also possible to use a single CoglPixelBuffer with multiple bitmaps. The changes that are made are: • cogl_pixel_buffer_new_with_size has been removed and in its place is cogl_bitmap_new_with_size. This will create a pixel buffer at the right size and rowstride for the given width/height/format and immediately create a single CoglBitmap to point into it. The old function had an out-parameter for the stride of the image but with the new API this should be queriable from the bitmap (although there is no function for this yet). • There is now a public cogl_pixel_buffer_new constructor. This takes a size in bytes and data pointer similarly to cogl_attribute_buffer_new. • cogl_texture_new_from_buffer has been removed. If you want to create a texture from a pixel buffer you should wrap it up in a bitmap first. There is already API to create a texture from a bitmap. This patch also does a bit of header juggling because cogl-context.h was including cogl-texture.h and cogl-framebuffer.h which were causing some circular dependencies when cogl-bitmap.h includes cogl-context.h. These weren't actually needed in cogl-context.h itself but a few other headers were relying on them being included so this adds the #includes where necessary. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-25 15:04:45 -05:00
/**
* cogl_bitmap_new_with_size:
* @context: A #CoglContext
* @width: width of the bitmap in pixels
* @height: height of the bitmap in pixels
* @format: the format of the pixels the array will store
*
* Creates a new #CoglBitmap with the given width, height and format.
* The initial contents of the bitmap are undefined.
*
* The data for the bitmap will be stored in a newly created
* #CoglPixelBuffer. You can get a pointer to the pixel buffer using
* cogl_bitmap_get_buffer(). The #CoglBuffer API can then be
Change API so that CoglPixelBuffer no longer knows its w/h/format The idea is that CoglPixelBuffer should just be a buffer that can be used for pixel data and it has no idea about the details of any images that are stored in it. This is analogous to CoglAttributeBuffer which itself does not have any information about the attributes. When you want to use a pixel buffer you should create a CoglBitmap which points to a region of the attribute buffer and provides the extra needed information such as the width, height and format. That way it is also possible to use a single CoglPixelBuffer with multiple bitmaps. The changes that are made are: • cogl_pixel_buffer_new_with_size has been removed and in its place is cogl_bitmap_new_with_size. This will create a pixel buffer at the right size and rowstride for the given width/height/format and immediately create a single CoglBitmap to point into it. The old function had an out-parameter for the stride of the image but with the new API this should be queriable from the bitmap (although there is no function for this yet). • There is now a public cogl_pixel_buffer_new constructor. This takes a size in bytes and data pointer similarly to cogl_attribute_buffer_new. • cogl_texture_new_from_buffer has been removed. If you want to create a texture from a pixel buffer you should wrap it up in a bitmap first. There is already API to create a texture from a bitmap. This patch also does a bit of header juggling because cogl-context.h was including cogl-texture.h and cogl-framebuffer.h which were causing some circular dependencies when cogl-bitmap.h includes cogl-context.h. These weren't actually needed in cogl-context.h itself but a few other headers were relying on them being included so this adds the #includes where necessary. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-25 15:04:45 -05:00
* used to fill the bitmap with data.
*
* <note>Cogl will try its best to provide a hardware array you can
* map, write into and effectively do a zero copy upload when creating
* a texture from it with cogl_texture_new_from_bitmap(). For various
* reasons, such arrays are likely to have a stride larger than width
* * bytes_per_pixel. The user must take the stride into account when
* writing into it. The stride can be retrieved with
* cogl_bitmap_get_rowstride().</note>
*
* Return value: (transfer full): a #CoglPixelBuffer representing the
* newly created array or %NULL on failure
Change API so that CoglPixelBuffer no longer knows its w/h/format The idea is that CoglPixelBuffer should just be a buffer that can be used for pixel data and it has no idea about the details of any images that are stored in it. This is analogous to CoglAttributeBuffer which itself does not have any information about the attributes. When you want to use a pixel buffer you should create a CoglBitmap which points to a region of the attribute buffer and provides the extra needed information such as the width, height and format. That way it is also possible to use a single CoglPixelBuffer with multiple bitmaps. The changes that are made are: • cogl_pixel_buffer_new_with_size has been removed and in its place is cogl_bitmap_new_with_size. This will create a pixel buffer at the right size and rowstride for the given width/height/format and immediately create a single CoglBitmap to point into it. The old function had an out-parameter for the stride of the image but with the new API this should be queriable from the bitmap (although there is no function for this yet). • There is now a public cogl_pixel_buffer_new constructor. This takes a size in bytes and data pointer similarly to cogl_attribute_buffer_new. • cogl_texture_new_from_buffer has been removed. If you want to create a texture from a pixel buffer you should wrap it up in a bitmap first. There is already API to create a texture from a bitmap. This patch also does a bit of header juggling because cogl-context.h was including cogl-texture.h and cogl-framebuffer.h which were causing some circular dependencies when cogl-bitmap.h includes cogl-context.h. These weren't actually needed in cogl-context.h itself but a few other headers were relying on them being included so this adds the #includes where necessary. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-25 15:04:45 -05:00
*
* Since: 1.10
* Stability: Unstable
*/
CoglBitmap *
cogl_bitmap_new_with_size (CoglContext *context,
unsigned int width,
unsigned int height,
CoglPixelFormat format);
/**
* cogl_bitmap_new_for_data:
* @context: A #CoglContext
* @width: The width of the bitmap.
* @height: The height of the bitmap.
* @format: The format of the pixel data.
* @rowstride: The rowstride of the bitmap (the number of bytes from
* the start of one row of the bitmap to the next).
* @data: A pointer to the data. The bitmap will take ownership of this data.
*
* Creates a bitmap using some existing data. The data is not copied
* so the application must keep the buffer alive for the lifetime of
* the #CoglBitmap. This can be used for example with
* cogl_framebuffer_read_pixels_into_bitmap() to read data directly
* into an application buffer with the specified rowstride.
*
* Return value: (transfer full): A new #CoglBitmap.
* Since: 1.10
* Stability: unstable
*/
CoglBitmap *
cogl_bitmap_new_for_data (CoglContext *context,
int width,
int height,
CoglPixelFormat format,
int rowstride,
uint8_t *data);
/**
* cogl_bitmap_get_format:
* @bitmap: A #CoglBitmap
*
* Return value: the #CoglPixelFormat that the data for the bitmap is in.
* Since: 1.10
* Stability: unstable
*/
CoglPixelFormat
cogl_bitmap_get_format (CoglBitmap *bitmap);
/**
* cogl_bitmap_get_width:
* @bitmap: A #CoglBitmap
*
* Return value: the width of the bitmap
* Since: 1.10
* Stability: unstable
*/
int
cogl_bitmap_get_width (CoglBitmap *bitmap);
/**
* cogl_bitmap_get_height:
* @bitmap: A #CoglBitmap
*
* Return value: the height of the bitmap
* Since: 1.10
* Stability: unstable
*/
int
cogl_bitmap_get_height (CoglBitmap *bitmap);
/**
* cogl_bitmap_get_rowstride:
* @bitmap: A #CoglBitmap
*
* Return value: the rowstride of the bitmap. This is the number of
* bytes between the address of start of one row to the address of the
* next row in the image.
* Since: 1.10
* Stability: unstable
*/
int
cogl_bitmap_get_rowstride (CoglBitmap *bitmap);
/**
* cogl_bitmap_get_buffer:
* @bitmap: A #CoglBitmap
*
* Return value: (transfer none): the #CoglPixelBuffer that this
* buffer uses for storage. Note that if the bitmap was created with
* cogl_bitmap_new_from_file() then it will not actually be using a
* pixel buffer and this function will return %NULL.
* Stability: unstable
* Since: 1.10
*/
CoglPixelBuffer *
cogl_bitmap_get_buffer (CoglBitmap *bitmap);
#endif /* COGL_ENABLE_EXPERIMENTAL_API */
/**
* cogl_bitmap_get_size_from_file:
* @filename: the file to check
* @width: (out): return location for the bitmap width, or %NULL
* @height: (out): return location for the bitmap height, or %NULL
*
* Parses an image file enough to extract the width and height
* of the bitmap.
*
* Return value: %TRUE if the image was successfully parsed
*
* Since: 1.0
*/
CoglBool
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
cogl_bitmap_get_size_from_file (const char *filename,
int *width,
int *height);
/**
* cogl_is_bitmap:
* @object: a #CoglObject pointer
*
* Checks whether @object is a #CoglBitmap
*
* Return value: %TRUE if the passed @object represents a bitmap,
* and %FALSE otherwise
*
* Since: 1.0
*/
CoglBool
cogl_is_bitmap (void *object);
/**
* COGL_BITMAP_ERROR:
*
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 14:28:27 -04:00
* #CoglError domain for bitmap errors.
*
* Since: 1.4
*/
#define COGL_BITMAP_ERROR (cogl_bitmap_error_quark ())
/**
* CoglBitmapError:
* @COGL_BITMAP_ERROR_FAILED: Generic failure code, something went
* wrong.
2010-12-22 04:42:41 -05:00
* @COGL_BITMAP_ERROR_UNKNOWN_TYPE: Unknown image type.
* @COGL_BITMAP_ERROR_CORRUPT_IMAGE: An image file was broken somehow.
*
* Error codes that can be thrown when performing bitmap
* operations. Note that gdk_pixbuf_new_from_file() can also throw
* errors directly from the underlying image loading library. For
* example, if GdkPixbuf is used then errors #GdkPixbufError<!-- -->s
* will be used directly.
*
* Since: 1.4
*/
typedef enum {
COGL_BITMAP_ERROR_FAILED,
COGL_BITMAP_ERROR_UNKNOWN_TYPE,
COGL_BITMAP_ERROR_CORRUPT_IMAGE
} CoglBitmapError;
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 14:28:27 -04:00
uint32_t cogl_bitmap_error_quark (void);
COGL_END_DECLS
#endif /* __COGL_BITMAP_H__ */