Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
project('mutter', 'c',
|
2022-02-14 14:11:06 -05:00
|
|
|
version: '42.beta',
|
2021-08-05 09:48:07 -04:00
|
|
|
meson_version: '>= 0.53.0',
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
license: 'GPLv2+'
|
|
|
|
|
)
|
|
|
|
|
|
2019-07-23 14:26:14 -04:00
|
|
|
split_version = meson.project_version().split('.')
|
|
|
|
|
|
2021-10-14 12:37:45 -04:00
|
|
|
# API version, bump each development cycle
|
|
|
|
|
libmutter_api_version = '10'
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
|
2021-08-05 10:18:44 -04:00
|
|
|
mutter_srcdir = meson.current_source_dir()
|
|
|
|
|
mutter_builddir = meson.current_build_dir()
|
|
|
|
|
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
# generic version requirements
|
2019-05-17 19:11:43 -04:00
|
|
|
fribidi_req = '>= 1.0.0'
|
2021-07-27 11:33:38 -04:00
|
|
|
glib_req = '>= 2.69.0'
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
gi_req = '>= 0.9.5'
|
2020-09-20 17:38:17 -04:00
|
|
|
graphene_req = '>= 1.10.2'
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
gtk3_req = '>= 3.19.8'
|
|
|
|
|
gdk_pixbuf_req = '>= 2.0'
|
|
|
|
|
uprof_req = '>= 0.3'
|
2020-11-22 08:42:35 -05:00
|
|
|
pango_req = '>= 1.46.0'
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
cairo_req = '>= 1.10.0'
|
|
|
|
|
pangocairo_req = '>= 1.20'
|
2021-01-14 06:38:01 -05:00
|
|
|
gsettings_desktop_schemas_req = '>= 40.alpha'
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
json_glib_req = '>= 0.12.0'
|
|
|
|
|
xcomposite_req = '>= 0.4'
|
|
|
|
|
xkbcommon_req = '>= 0.4.3'
|
xwayland: Mark our X11 connection terminatable
The connection to the Xserver for the X11 window manager part of mutter
even on Wayland may prevent the Xserver from shutting down.
Currently, what mutter does is to check the X11 clients still connected
to Xwayland using the XRes extension, with a list of X11 clients that
can be safely ignored (typically the GNOME XSettings daemon, the IBus
daemon, pulseaudio and even mutter window manager itself).
When there is just those known clients remaining, mutter would kill
Xwayland automatically.
But that's racy, because between the time mutter checks with Xwayland
the remaining clients and the time it actually kills the process, a new
X11 client might have come along and won't be able to connect to
Xwayland that mutter is just about to kill.
Because of that, the feature “autoclose-xwayland” is marked as an
experimental feature in mutter and not enabled by default.
Thankfully, the Xserver has all it takes to manage that already, and
is even capable of terminating itself once all X11 clients are gone (the
-terminate option on the command line).
With XFixes version 6, the X11 clients can declare themselves
"terminatable", so that the Xserver could simply ignore those X11
clients when checking the remaining clients and terminate itself
automatically.
Use that mechanism to declare mutter's own connection to the Xserver as
"terminatable" when Xwayland is started on demand so that it won't hold
Xwayland alive for the sole purpose of mutter itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1794>
2021-03-17 10:44:45 -04:00
|
|
|
xfixes_req = '>= 6'
|
2019-09-01 08:02:01 -04:00
|
|
|
xi_req = '>= 1.7.4'
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
xrandr_req = '>= 1.5.0'
|
|
|
|
|
libstartup_notification_req = '>= 0.7'
|
2019-01-08 09:59:57 -05:00
|
|
|
libcanberra_req = '>= 0.26'
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
libwacom_req = '>= 0.13'
|
|
|
|
|
atk_req = '>= 2.5.3'
|
|
|
|
|
|
|
|
|
|
# optional version requirements
|
2018-11-06 13:48:47 -05:00
|
|
|
udev_req = '>= 228'
|
2018-11-06 14:04:12 -05:00
|
|
|
gudev_req = '>= 232'
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
|
|
|
|
|
# wayland version requirements
|
2019-09-18 12:38:22 -04:00
|
|
|
wayland_server_req = '>= 1.18'
|
2021-08-05 09:10:47 -04:00
|
|
|
wayland_protocols_req = '>= 1.24'
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
|
|
|
|
|
# native backend version requirements
|
2021-09-15 12:01:00 -04:00
|
|
|
libinput_req = '>= 1.19.0'
|
2020-09-01 09:20:27 -04:00
|
|
|
gbm_req = '>= 17.3'
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
|
|
|
|
|
# screen cast version requirements
|
2021-12-07 11:19:14 -05:00
|
|
|
libpipewire_req = '>= 0.3.33'
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
|
2019-12-04 17:25:41 -05:00
|
|
|
# profiler requirements
|
2020-07-04 15:01:28 -04:00
|
|
|
sysprof_req = '>= 3.37.2'
|
2019-12-04 17:25:41 -05:00
|
|
|
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
gnome = import('gnome')
|
|
|
|
|
pkg = import('pkgconfig')
|
|
|
|
|
i18n = import('i18n')
|
2021-12-10 17:49:48 -05:00
|
|
|
fs = import('fs')
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
cc = meson.get_compiler('c')
|
|
|
|
|
|
|
|
|
|
prefix = get_option('prefix')
|
|
|
|
|
|
|
|
|
|
bindir = join_paths(prefix, get_option('bindir'))
|
|
|
|
|
datadir = join_paths(prefix, get_option('datadir'))
|
|
|
|
|
libdir = join_paths(prefix, get_option('libdir'))
|
|
|
|
|
libexecdir = join_paths(prefix, get_option('libexecdir'))
|
|
|
|
|
includedir = join_paths(prefix, get_option('includedir'))
|
|
|
|
|
sysconfdir = get_option('sysconfdir')
|
|
|
|
|
|
|
|
|
|
pkgname = '@0@-@1@'.format(meson.project_name(), libmutter_api_version)
|
|
|
|
|
|
|
|
|
|
pkgdatadir = join_paths(datadir, pkgname)
|
|
|
|
|
pkglibdir = join_paths(libdir, pkgname)
|
|
|
|
|
pkgincludedir = join_paths(includedir, pkgname)
|
|
|
|
|
|
2019-01-08 16:28:18 -05:00
|
|
|
pcdir = join_paths(libdir, 'pkgconfig')
|
|
|
|
|
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
gettext_package = meson.project_name()
|
|
|
|
|
localedir = join_paths(datadir, 'locale')
|
|
|
|
|
|
2018-12-20 09:29:59 -05:00
|
|
|
libmutter_name = 'mutter-' + libmutter_api_version
|
|
|
|
|
|
2018-12-17 10:26:07 -05:00
|
|
|
mutter_installed_tests_datadir = join_paths(
|
|
|
|
|
datadir, 'installed-tests', libmutter_name)
|
|
|
|
|
mutter_installed_tests_libexecdir = join_paths(
|
|
|
|
|
libexecdir, 'installed-tests', libmutter_name)
|
|
|
|
|
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
m_dep = cc.find_library('m', required: true)
|
|
|
|
|
x11_dep = dependency('x11')
|
2019-02-15 11:22:25 -05:00
|
|
|
graphene_dep = dependency('graphene-gobject-1.0', version: graphene_req)
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
gtk3_dep = dependency('gtk+-3.0', version: gtk3_req)
|
|
|
|
|
gdk_pixbuf_dep = dependency('gdk-pixbuf-2.0')
|
|
|
|
|
pango_dep = dependency('pango', version: pango_req)
|
|
|
|
|
cairo_dep = dependency('cairo', version: cairo_req)
|
|
|
|
|
cairo_gobject_dep = dependency('cairo-gobject', version: cairo_req)
|
|
|
|
|
pangocairo_dep = dependency('pangocairo', version: pangocairo_req)
|
2019-05-17 19:11:43 -04:00
|
|
|
fribidi_dep = dependency('fribidi', version: fribidi_req)
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
gsettings_desktop_schemas_dep = dependency('gsettings-desktop-schemas',
|
|
|
|
|
version: gsettings_desktop_schemas_req)
|
|
|
|
|
glib_dep = dependency('glib-2.0', version: glib_req)
|
|
|
|
|
gio_dep = dependency('gio-unix-2.0', version: glib_req)
|
|
|
|
|
gio_unix_dep = dependency('gio-unix-2.0', version: glib_req)
|
|
|
|
|
gobject_dep = dependency('gobject-2.0', version: glib_req)
|
|
|
|
|
gthread_dep = dependency('gobject-2.0', version: glib_req)
|
|
|
|
|
gmodule_no_export_dep = dependency('gmodule-no-export-2.0', version: glib_req)
|
|
|
|
|
gnome_settings_daemon_dep = dependency('gnome-settings-daemon')
|
|
|
|
|
json_glib_dep = dependency('json-glib-1.0', version: json_glib_req)
|
|
|
|
|
gnome_desktop_dep = dependency('gnome-desktop-3.0')
|
|
|
|
|
xcomposite_dep = dependency('xcomposite', version: xcomposite_req)
|
|
|
|
|
xcursor_dep = dependency('xcursor')
|
|
|
|
|
xdamage_dep = dependency('xdamage')
|
|
|
|
|
xext_dep = dependency('xext')
|
|
|
|
|
xfixes_dep = dependency('xfixes', version: xfixes_req)
|
|
|
|
|
xi_dep = dependency('xi', version: xi_req)
|
|
|
|
|
xtst_dep = dependency('xtst')
|
|
|
|
|
xkbfile_dep = dependency('xkbfile')
|
|
|
|
|
xkeyboard_config_dep = dependency('xkeyboard-config')
|
|
|
|
|
xkbcommon_dep = dependency('xkbcommon', version: xkbcommon_req)
|
|
|
|
|
xkbcommon_x11_dep = dependency('xkbcommon-x11')
|
|
|
|
|
xrender_dep = dependency('xrender')
|
|
|
|
|
x11_xcb_dep = dependency('x11-xcb')
|
|
|
|
|
xrandr_dep = dependency('xrandr', version: xrandr_req)
|
|
|
|
|
xcb_randr_dep = dependency('xcb-randr')
|
|
|
|
|
xcb_res_dep = dependency('xcb-res')
|
|
|
|
|
xinerama_dep = dependency('xinerama')
|
2019-06-18 10:12:46 -04:00
|
|
|
xau_dep = dependency('xau')
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
ice_dep = dependency('ice')
|
|
|
|
|
atk_dep = dependency('atk', version: atk_req)
|
2019-01-08 09:59:57 -05:00
|
|
|
libcanberra_dep = dependency('libcanberra', version: libcanberra_req)
|
2020-02-26 10:08:56 -05:00
|
|
|
dbus_dep = dependency('dbus-1')
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
|
|
|
|
|
# For now always require X11 support
|
|
|
|
|
have_x11 = true
|
|
|
|
|
|
|
|
|
|
have_gl = get_option('opengl')
|
|
|
|
|
if have_gl
|
|
|
|
|
gl_dep = dependency('gl')
|
|
|
|
|
gl_libname = get_option('opengl_libname')
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_egl = get_option('egl')
|
|
|
|
|
if have_egl
|
|
|
|
|
egl_dep = dependency('egl')
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_glx = get_option('glx')
|
|
|
|
|
if have_glx
|
|
|
|
|
if not have_gl
|
|
|
|
|
error('GLX support requires OpenGL to be enabled')
|
|
|
|
|
endif
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_egl_xlib = have_egl and have_x11
|
|
|
|
|
|
|
|
|
|
have_gles2 = get_option('gles2')
|
|
|
|
|
if have_gles2
|
|
|
|
|
gles2_dep = dependency('glesv2')
|
|
|
|
|
gles2_libname = get_option('gles2_libname')
|
|
|
|
|
|
|
|
|
|
if not have_egl
|
|
|
|
|
error('GLESv2 support requires EGL to be enabled')
|
|
|
|
|
endif
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_wayland = get_option('wayland')
|
|
|
|
|
if have_wayland
|
|
|
|
|
wayland_server_dep = dependency('wayland-server', version: wayland_server_req)
|
2019-12-06 13:05:32 -05:00
|
|
|
wayland_client_dep = dependency('wayland-client', version: wayland_server_req)
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
wayland_protocols_dep = dependency('wayland-protocols',
|
|
|
|
|
version: wayland_protocols_req)
|
|
|
|
|
wayland_egl_dep = dependency('wayland-egl')
|
|
|
|
|
|
|
|
|
|
if not have_egl
|
|
|
|
|
error('Wayland support requires EGL to be enabled')
|
|
|
|
|
endif
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_libgudev = get_option('udev')
|
|
|
|
|
if have_libgudev
|
|
|
|
|
libudev_dep = dependency('libudev', version: udev_req)
|
2018-11-06 14:04:12 -05:00
|
|
|
gudev_dep = dependency('gudev-1.0', version: gudev_req)
|
2020-09-14 14:36:17 -04:00
|
|
|
udev_dep = dependency('udev')
|
2021-04-29 10:33:36 -04:00
|
|
|
|
|
|
|
|
udev_dir = get_option('udev_dir')
|
|
|
|
|
if udev_dir == ''
|
|
|
|
|
udev_dir = udev_dep.get_pkgconfig_variable('udevdir')
|
|
|
|
|
endif
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
endif
|
|
|
|
|
|
2021-08-05 10:07:28 -04:00
|
|
|
have_libsystemd = get_option('systemd')
|
|
|
|
|
libsystemd_dep = dependency('libsystemd', required: have_libsystemd)
|
|
|
|
|
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
have_native_backend = get_option('native_backend')
|
|
|
|
|
if have_native_backend
|
|
|
|
|
libdrm_dep = dependency('libdrm')
|
|
|
|
|
libgbm_dep = dependency('gbm', version: gbm_req)
|
|
|
|
|
libinput_dep = dependency('libinput', version: libinput_req)
|
|
|
|
|
|
|
|
|
|
if libsystemd_dep.found()
|
|
|
|
|
logind_provider_dep = libsystemd_dep
|
|
|
|
|
else
|
|
|
|
|
logind_provider_dep = dependency('libelogind')
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
if not have_egl
|
|
|
|
|
error('The native backend requires EGL to be enabled')
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
if not have_gles2
|
|
|
|
|
error('The native backend requires GLESv2 to be enabled')
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
if not have_libgudev
|
|
|
|
|
error('The native backend requires udev to be enabled')
|
|
|
|
|
endif
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_egl_device = get_option('egl_device')
|
|
|
|
|
|
|
|
|
|
have_wayland_eglstream = get_option('wayland_eglstream')
|
|
|
|
|
if have_wayland_eglstream
|
|
|
|
|
wayland_eglstream_protocols_dep = dependency('wayland-eglstream-protocols')
|
|
|
|
|
dl_dep = cc.find_library('dl', required: true)
|
|
|
|
|
|
|
|
|
|
if not have_wayland
|
|
|
|
|
error('Wayland EGLStream support requires Wayland to be enabled')
|
|
|
|
|
endif
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_sm = get_option('sm')
|
|
|
|
|
if have_sm
|
|
|
|
|
sm_dep = dependency('sm')
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_libwacom = get_option('libwacom')
|
|
|
|
|
if have_libwacom
|
|
|
|
|
libwacom_dep = dependency('libwacom', version: libwacom_req)
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_pango_ft2 = get_option('pango_ft2')
|
|
|
|
|
if have_pango_ft2
|
|
|
|
|
pangoft2_dep = dependency('pangoft2')
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_startup_notification = get_option('startup_notification')
|
|
|
|
|
if have_startup_notification
|
|
|
|
|
libstartup_notification_dep = dependency('libstartup-notification-1.0',
|
|
|
|
|
version: libstartup_notification_req)
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_remote_desktop = get_option('remote_desktop')
|
|
|
|
|
if have_remote_desktop
|
2020-01-14 03:44:45 -05:00
|
|
|
libpipewire_dep = dependency('libpipewire-0.3', version: libpipewire_req)
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
have_introspection = get_option('introspection')
|
|
|
|
|
if have_introspection
|
|
|
|
|
gobject_introspection_dep = dependency('gobject-introspection-1.0')
|
2018-12-22 05:28:46 -05:00
|
|
|
|
|
|
|
|
introspection_args = [
|
|
|
|
|
'--quiet',
|
|
|
|
|
'-U_GNU_SOURCE',
|
|
|
|
|
]
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
endif
|
|
|
|
|
|
2022-01-19 15:26:30 -05:00
|
|
|
have_documentation = get_option('docs')
|
|
|
|
|
if have_documentation
|
|
|
|
|
gidocgen_dep = dependency('gi-docgen', version: '>= 2021.1',
|
|
|
|
|
fallback: ['gi-docgen', 'dummy_dep'])
|
|
|
|
|
endif
|
|
|
|
|
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
have_tests = get_option('tests')
|
2019-02-13 12:51:21 -05:00
|
|
|
have_core_tests = false
|
|
|
|
|
have_cogl_tests = false
|
|
|
|
|
have_clutter_tests = false
|
2021-01-19 11:48:04 -05:00
|
|
|
have_native_tests = false
|
2021-12-10 17:49:48 -05:00
|
|
|
have_kvm_tests = false
|
2021-12-13 04:39:45 -05:00
|
|
|
have_tty_tests = false
|
2019-02-13 12:51:21 -05:00
|
|
|
have_installed_tests = false
|
|
|
|
|
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
if have_tests
|
2019-02-13 12:51:21 -05:00
|
|
|
have_core_tests = get_option('core_tests')
|
|
|
|
|
if have_core_tests
|
|
|
|
|
if not have_wayland
|
|
|
|
|
error('Tests require Wayland to be enabled')
|
|
|
|
|
endif
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
endif
|
2021-01-19 11:48:04 -05:00
|
|
|
have_native_tests = get_option('native_tests')
|
|
|
|
|
if have_native_tests
|
|
|
|
|
if not have_native_backend
|
|
|
|
|
error('Native tests require the native backend')
|
|
|
|
|
endif
|
2021-02-01 14:32:27 -05:00
|
|
|
if not have_remote_desktop
|
|
|
|
|
error('Native tests require remote desktop')
|
|
|
|
|
endif
|
2021-01-19 11:48:04 -05:00
|
|
|
endif
|
2021-12-10 17:49:48 -05:00
|
|
|
have_kvm_tests = get_option('kvm_tests')
|
|
|
|
|
if have_kvm_tests
|
|
|
|
|
if not have_native_backend
|
|
|
|
|
error('KVM tests need the native backend tests')
|
|
|
|
|
endif
|
|
|
|
|
if host_machine.cpu_family() != 'x86_64'
|
|
|
|
|
error('KVM tests are only supported on x86_64')
|
|
|
|
|
endif
|
|
|
|
|
endif
|
2021-12-13 04:39:45 -05:00
|
|
|
have_tty_tests = get_option('tty_tests')
|
|
|
|
|
if have_tty_tests
|
|
|
|
|
if not have_native_backend
|
|
|
|
|
error('TTY tests need the native backend tests')
|
|
|
|
|
endif
|
|
|
|
|
endif
|
2019-02-13 12:51:21 -05:00
|
|
|
|
|
|
|
|
have_cogl_tests = get_option('cogl_tests')
|
|
|
|
|
have_clutter_tests = get_option('clutter_tests')
|
|
|
|
|
have_installed_tests = get_option('installed_tests')
|
2021-08-27 07:02:42 -04:00
|
|
|
|
2020-05-04 13:22:35 -04:00
|
|
|
meta_dbus_runner = find_program('src/tests/meta-dbus-runner.py')
|
|
|
|
|
default_test_wrappers = [
|
|
|
|
|
meta_dbus_runner,
|
|
|
|
|
]
|
|
|
|
|
|
|
|
|
|
add_test_setup('default',
|
|
|
|
|
is_default: true,
|
|
|
|
|
exe_wrapper: default_test_wrappers,
|
|
|
|
|
)
|
|
|
|
|
|
2021-10-28 08:55:41 -04:00
|
|
|
add_test_setup('plain')
|
|
|
|
|
|
2021-08-27 07:02:42 -04:00
|
|
|
add_test_setup('CI',
|
|
|
|
|
env: [
|
|
|
|
|
'MUTTER_DEBUG_DUMMY_MODE_SPECS=800x600@10.0',
|
|
|
|
|
],
|
|
|
|
|
exe_wrapper: [
|
2020-05-04 13:22:35 -04:00
|
|
|
default_test_wrappers,
|
2021-08-27 07:02:42 -04:00
|
|
|
find_program('catchsegv'),
|
|
|
|
|
find_program('xvfb-run'), '-a', '-s', '+iglx -noreset',
|
|
|
|
|
],
|
|
|
|
|
timeout_multiplier: 10,
|
|
|
|
|
)
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
endif
|
|
|
|
|
|
2018-05-15 11:31:29 -04:00
|
|
|
have_profiler = get_option('profiler')
|
|
|
|
|
if have_profiler
|
2020-07-04 15:01:28 -04:00
|
|
|
# libsysprof-capture support
|
|
|
|
|
sysprof_dep = dependency('sysprof-capture-4',
|
|
|
|
|
required: true,
|
|
|
|
|
default_options: [
|
|
|
|
|
'enable_examples=false',
|
|
|
|
|
'enable_gtk=false',
|
|
|
|
|
'enable_tests=false',
|
|
|
|
|
'enable_tools=false',
|
|
|
|
|
'libsysprof=false',
|
|
|
|
|
'with_sysprofd=none',
|
|
|
|
|
'help=false',
|
|
|
|
|
],
|
|
|
|
|
fallback: ['sysprof', 'libsysprof_capture_dep'],
|
|
|
|
|
)
|
2018-05-15 11:31:29 -04:00
|
|
|
endif
|
|
|
|
|
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
required_functions = [
|
|
|
|
|
'ffs',
|
|
|
|
|
'clz',
|
2019-06-17 17:20:10 -04:00
|
|
|
'memmem',
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
]
|
|
|
|
|
foreach function : required_functions
|
|
|
|
|
if not cc.has_function(function)
|
|
|
|
|
error('Required function ' + function + ' missing')
|
|
|
|
|
endif
|
|
|
|
|
endforeach
|
|
|
|
|
|
2019-09-09 05:17:22 -04:00
|
|
|
if host_machine.cpu_family() == 'x86'
|
|
|
|
|
add_project_arguments('-ffloat-store', language: 'c')
|
|
|
|
|
endif
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
add_project_arguments('-D_GNU_SOURCE', language: 'c')
|
|
|
|
|
|
2019-04-29 06:44:16 -04:00
|
|
|
buildtype = get_option('buildtype')
|
|
|
|
|
if buildtype != 'plain'
|
|
|
|
|
all_warnings = [
|
|
|
|
|
'-fno-strict-aliasing',
|
|
|
|
|
'-Wpointer-arith',
|
|
|
|
|
'-Wmissing-declarations',
|
|
|
|
|
'-Wimplicit-function-declaration',
|
|
|
|
|
'-Wformat=2',
|
|
|
|
|
'-Wformat-nonliteral',
|
|
|
|
|
'-Wformat-security',
|
|
|
|
|
'-Wstrict-prototypes',
|
|
|
|
|
'-Wmissing-prototypes',
|
|
|
|
|
'-Wnested-externs',
|
|
|
|
|
'-Wold-style-definition',
|
|
|
|
|
'-Wundef',
|
|
|
|
|
'-Wunused',
|
|
|
|
|
'-Wcast-align',
|
|
|
|
|
'-Wmissing-noreturn',
|
|
|
|
|
'-Wmissing-format-attribute',
|
|
|
|
|
'-Wmissing-include-dirs',
|
|
|
|
|
'-Wlogical-op',
|
|
|
|
|
'-Wignored-qualifiers',
|
|
|
|
|
'-Werror=redundant-decls',
|
|
|
|
|
'-Werror=implicit',
|
|
|
|
|
'-Werror=nonnull',
|
|
|
|
|
'-Werror=init-self',
|
|
|
|
|
'-Werror=main',
|
|
|
|
|
'-Werror=missing-braces',
|
|
|
|
|
'-Werror=sequence-point',
|
|
|
|
|
'-Werror=return-type',
|
|
|
|
|
'-Werror=trigraphs',
|
|
|
|
|
'-Werror=array-bounds',
|
|
|
|
|
'-Werror=write-strings',
|
|
|
|
|
'-Werror=address',
|
|
|
|
|
'-Werror=int-to-pointer-cast',
|
|
|
|
|
'-Werror=pointer-to-int-cast',
|
|
|
|
|
'-Werror=empty-body',
|
|
|
|
|
'-Werror=write-strings',
|
|
|
|
|
]
|
|
|
|
|
supported_warnings = cc.get_supported_arguments(all_warnings)
|
|
|
|
|
add_project_arguments(supported_warnings, language: 'c')
|
|
|
|
|
endif
|
2019-01-20 11:44:22 -05:00
|
|
|
|
2019-03-17 09:35:56 -04:00
|
|
|
if get_option('debug')
|
|
|
|
|
debug_c_args = [
|
|
|
|
|
'-DG_ENABLE_DEBUG',
|
|
|
|
|
'-fno-omit-frame-pointer'
|
|
|
|
|
]
|
|
|
|
|
supported_debug_c_args = cc.get_supported_arguments(debug_c_args)
|
|
|
|
|
add_project_arguments(supported_debug_c_args, language: 'c')
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
cc.compiles('void main (void) { __builtin_ffsl (0); __builtin_popcountl (0); }')
|
|
|
|
|
|
|
|
|
|
cdata = configuration_data()
|
|
|
|
|
cdata.set_quoted('GETTEXT_PACKAGE', gettext_package)
|
|
|
|
|
cdata.set_quoted('VERSION', meson.project_version())
|
|
|
|
|
cdata.set_quoted('PACKAGE_VERSION', meson.project_version())
|
|
|
|
|
|
|
|
|
|
cdata.set('HAVE_EGL', have_egl)
|
|
|
|
|
cdata.set('HAVE_WAYLAND', have_wayland)
|
2021-08-05 10:07:28 -04:00
|
|
|
cdata.set('HAVE_LIBSYSTEMD', have_libsystemd)
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
cdata.set('HAVE_NATIVE_BACKEND', have_native_backend)
|
|
|
|
|
cdata.set('HAVE_REMOTE_DESKTOP', have_remote_desktop)
|
|
|
|
|
cdata.set('HAVE_EGL_DEVICE', have_egl_device)
|
|
|
|
|
cdata.set('HAVE_WAYLAND_EGLSTREAM', have_wayland_eglstream)
|
|
|
|
|
cdata.set('HAVE_LIBGUDEV', have_libgudev)
|
|
|
|
|
cdata.set('HAVE_LIBWACOM', have_libwacom)
|
|
|
|
|
cdata.set('HAVE_SM', have_sm)
|
|
|
|
|
cdata.set('HAVE_STARTUP_NOTIFICATION', have_startup_notification)
|
|
|
|
|
cdata.set('HAVE_INTROSPECTION', have_introspection)
|
2019-05-31 11:42:27 -04:00
|
|
|
cdata.set('HAVE_PROFILER', have_profiler)
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
|
|
|
|
|
xkb_base = xkeyboard_config_dep.get_pkgconfig_variable('xkb_base')
|
|
|
|
|
cdata.set_quoted('XKB_BASE', xkb_base)
|
|
|
|
|
|
2019-09-27 04:15:48 -04:00
|
|
|
if cc.has_header_symbol('sys/prctl.h', 'prctl')
|
|
|
|
|
cdata.set('HAVE_SYS_PRCTL', 1)
|
|
|
|
|
endif
|
|
|
|
|
|
2019-07-19 16:50:31 -04:00
|
|
|
have_xwayland_initfd = false
|
2021-01-22 05:16:24 -05:00
|
|
|
have_xwayland_listenfd = false
|
xwayland: Mark our X11 connection terminatable
The connection to the Xserver for the X11 window manager part of mutter
even on Wayland may prevent the Xserver from shutting down.
Currently, what mutter does is to check the X11 clients still connected
to Xwayland using the XRes extension, with a list of X11 clients that
can be safely ignored (typically the GNOME XSettings daemon, the IBus
daemon, pulseaudio and even mutter window manager itself).
When there is just those known clients remaining, mutter would kill
Xwayland automatically.
But that's racy, because between the time mutter checks with Xwayland
the remaining clients and the time it actually kills the process, a new
X11 client might have come along and won't be able to connect to
Xwayland that mutter is just about to kill.
Because of that, the feature “autoclose-xwayland” is marked as an
experimental feature in mutter and not enabled by default.
Thankfully, the Xserver has all it takes to manage that already, and
is even capable of terminating itself once all X11 clients are gone (the
-terminate option on the command line).
With XFixes version 6, the X11 clients can declare themselves
"terminatable", so that the Xserver could simply ignore those X11
clients when checking the remaining clients and terminate itself
automatically.
Use that mechanism to declare mutter's own connection to the Xserver as
"terminatable" when Xwayland is started on demand so that it won't hold
Xwayland alive for the sole purpose of mutter itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1794>
2021-03-17 10:44:45 -04:00
|
|
|
have_xwayland_terminate_delay = false
|
2018-11-30 23:02:05 -05:00
|
|
|
if have_wayland
|
2020-12-15 04:19:05 -05:00
|
|
|
xwayland_dep = dependency('xwayland', required: false)
|
|
|
|
|
|
2018-11-30 23:02:05 -05:00
|
|
|
xwayland_path = get_option('xwayland_path')
|
|
|
|
|
if xwayland_path == ''
|
2020-12-15 04:19:05 -05:00
|
|
|
if xwayland_dep.found()
|
|
|
|
|
xwayland_path = xwayland_dep.get_pkgconfig_variable('xwayland')
|
|
|
|
|
else
|
|
|
|
|
xwayland_path = find_program('Xwayland').path()
|
|
|
|
|
endif
|
2018-11-30 23:02:05 -05:00
|
|
|
endif
|
|
|
|
|
cdata.set_quoted('XWAYLAND_PATH', xwayland_path)
|
2019-06-20 06:11:29 -04:00
|
|
|
|
|
|
|
|
# For Xwayland authority file generation.
|
|
|
|
|
if cc.has_header_symbol('sys/random.h', 'getrandom')
|
|
|
|
|
cdata.set('HAVE_SYS_RANDOM', 1)
|
|
|
|
|
elif cc.has_header_symbol('linux/random.h', 'getrandom')
|
|
|
|
|
cdata.set('HAVE_LINUX_RANDOM', 1)
|
|
|
|
|
else
|
|
|
|
|
error('Required function getrandom not found')
|
|
|
|
|
endif
|
2019-07-19 16:50:31 -04:00
|
|
|
|
|
|
|
|
# For Xwayland -initfd usage
|
|
|
|
|
use_initfd = get_option('xwayland_initfd')
|
2020-12-15 04:19:05 -05:00
|
|
|
if xwayland_dep.found()
|
|
|
|
|
xwayland_supports_initfd = xwayland_dep.get_pkgconfig_variable('have_initfd') == 'true'
|
|
|
|
|
else
|
|
|
|
|
xwayland_options = run_command(xwayland_path, '-help')
|
|
|
|
|
xwayland_supports_initfd = xwayland_options.stderr().contains('-initfd')
|
|
|
|
|
endif
|
|
|
|
|
|
2019-07-19 16:50:31 -04:00
|
|
|
if use_initfd.auto()
|
2020-12-15 04:19:05 -05:00
|
|
|
have_xwayland_initfd = xwayland_supports_initfd
|
2019-07-19 16:50:31 -04:00
|
|
|
else
|
|
|
|
|
have_xwayland_initfd = use_initfd.enabled()
|
2020-12-15 04:19:05 -05:00
|
|
|
if have_xwayland_initfd and not xwayland_supports_initfd
|
2020-03-03 09:26:06 -05:00
|
|
|
error('XWayland -initfd support requested but not available')
|
|
|
|
|
endif
|
2019-07-19 16:50:31 -04:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
if (have_xwayland_initfd)
|
|
|
|
|
cdata.set('HAVE_XWAYLAND_INITFD', 1)
|
|
|
|
|
endif
|
2021-01-22 05:16:24 -05:00
|
|
|
|
|
|
|
|
# For Xwayland -listenfd usage
|
|
|
|
|
if xwayland_dep.found()
|
|
|
|
|
have_xwayland_listenfd = xwayland_dep.get_pkgconfig_variable('have_listenfd') == 'true'
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
if (have_xwayland_listenfd)
|
|
|
|
|
cdata.set('HAVE_XWAYLAND_LISTENFD', 1)
|
|
|
|
|
endif
|
xwayland: Mark our X11 connection terminatable
The connection to the Xserver for the X11 window manager part of mutter
even on Wayland may prevent the Xserver from shutting down.
Currently, what mutter does is to check the X11 clients still connected
to Xwayland using the XRes extension, with a list of X11 clients that
can be safely ignored (typically the GNOME XSettings daemon, the IBus
daemon, pulseaudio and even mutter window manager itself).
When there is just those known clients remaining, mutter would kill
Xwayland automatically.
But that's racy, because between the time mutter checks with Xwayland
the remaining clients and the time it actually kills the process, a new
X11 client might have come along and won't be able to connect to
Xwayland that mutter is just about to kill.
Because of that, the feature “autoclose-xwayland” is marked as an
experimental feature in mutter and not enabled by default.
Thankfully, the Xserver has all it takes to manage that already, and
is even capable of terminating itself once all X11 clients are gone (the
-terminate option on the command line).
With XFixes version 6, the X11 clients can declare themselves
"terminatable", so that the Xserver could simply ignore those X11
clients when checking the remaining clients and terminate itself
automatically.
Use that mechanism to declare mutter's own connection to the Xserver as
"terminatable" when Xwayland is started on demand so that it won't hold
Xwayland alive for the sole purpose of mutter itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1794>
2021-03-17 10:44:45 -04:00
|
|
|
|
|
|
|
|
# For Xwayland -listenfd usage
|
|
|
|
|
if xwayland_dep.found()
|
|
|
|
|
have_xwayland_terminate_delay = xwayland_dep.get_pkgconfig_variable('have_terminate_delay') == 'true'
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
if (have_xwayland_terminate_delay)
|
|
|
|
|
cdata.set('HAVE_XWAYLAND_TERMINATE_DELAY', 1)
|
|
|
|
|
endif
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
endif
|
|
|
|
|
|
2019-06-14 10:04:44 -04:00
|
|
|
have_xsetioerrorexithandler = false
|
|
|
|
|
if cc.has_function('XSetIOErrorExitHandler', dependencies: x11_dep,
|
|
|
|
|
prefix: '''#include <X11/Xlib.h>''')
|
|
|
|
|
have_xsetioerrorexithandler = true
|
|
|
|
|
cdata.set('HAVE_XSETIOERROREXITHANDLER', 1)
|
|
|
|
|
endif
|
|
|
|
|
|
2020-01-17 17:43:24 -05:00
|
|
|
optional_functions = [
|
|
|
|
|
'mkostemp',
|
|
|
|
|
'posix_fallocate',
|
|
|
|
|
'memfd_create',
|
|
|
|
|
]
|
|
|
|
|
|
|
|
|
|
foreach function : optional_functions
|
|
|
|
|
if cc.has_function(function)
|
|
|
|
|
cdata.set('HAVE_' + function.to_upper(), 1)
|
|
|
|
|
else
|
|
|
|
|
message('Optional function ' + function + ' missing')
|
|
|
|
|
endif
|
|
|
|
|
endforeach
|
|
|
|
|
|
Add meson build support
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
2018-05-22 09:55:35 -04:00
|
|
|
xwayland_grab_default_access_rules = get_option('xwayland_grab_default_access_rules')
|
|
|
|
|
cdata.set_quoted('XWAYLAND_GRAB_DEFAULT_ACCESS_RULES',
|
|
|
|
|
xwayland_grab_default_access_rules)
|
|
|
|
|
|
|
|
|
|
cdata.set_quoted('MUTTER_PLUGIN_DIR', join_paths(pkglibdir, 'plugins'))
|
|
|
|
|
cdata.set_quoted('MUTTER_LOCALEDIR', localedir)
|
|
|
|
|
cdata.set_quoted('MUTTER_LIBEXECDIR', libexecdir)
|
|
|
|
|
cdata.set_quoted('MUTTER_PKGDATADIR', pkgdatadir)
|
|
|
|
|
|
|
|
|
|
config_h = configure_file(
|
|
|
|
|
input: 'config.h.meson',
|
|
|
|
|
output: 'config.h',
|
|
|
|
|
configuration: cdata
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
top_includepath = include_directories('.')
|
|
|
|
|
|
|
|
|
|
subdir('cogl')
|
|
|
|
|
subdir('clutter')
|
|
|
|
|
subdir('data')
|
|
|
|
|
subdir('src')
|
|
|
|
|
subdir('po')
|
|
|
|
|
subdir('doc/man')
|
2022-01-19 15:26:30 -05:00
|
|
|
if have_documentation
|
|
|
|
|
subdir('doc/reference')
|
|
|
|
|
endif
|
2018-12-17 10:39:54 -05:00
|
|
|
|
2019-08-27 05:30:14 -04:00
|
|
|
meson.add_install_script('meson/meson-postinstall.sh')
|
2021-08-31 05:46:57 -04:00
|
|
|
meson.add_dist_script('meson/check-version.py', meson.project_version(), 'NEWS')
|
2019-08-27 05:30:14 -04:00
|
|
|
|
2021-10-06 14:34:03 -04:00
|
|
|
summary('prefix', prefix, section: 'Directories')
|
|
|
|
|
summary('libexecdir', libexecdir, section: 'Directories')
|
|
|
|
|
summary('pkgdatadir', pkgdatadir, section: 'Directories')
|
|
|
|
|
|
|
|
|
|
summary('buildtype', get_option('buildtype'), section: 'Build Configuration')
|
|
|
|
|
summary('debug', get_option('debug'), section: 'Build Configuration')
|
2021-08-05 09:48:07 -04:00
|
|
|
|
|
|
|
|
summary('OpenGL', have_gl, section: 'Rendering APIs')
|
|
|
|
|
summary('GLES2', have_gles2, section: 'Rendering APIs')
|
|
|
|
|
summary('EGL', have_egl, section: 'Rendering APIs')
|
|
|
|
|
summary('GLX', have_glx, section: 'Rendering APIs')
|
|
|
|
|
|
|
|
|
|
summary('Wayland', have_wayland, section: 'Options')
|
|
|
|
|
summary('Wayland EGLStream', have_wayland_eglstream, section: 'Options')
|
|
|
|
|
summary('Native Backend', have_native_backend, section: 'Options')
|
|
|
|
|
summary('EGL Device', have_egl_device, section: 'Options')
|
|
|
|
|
summary('Remote desktop', have_remote_desktop, section: 'Options')
|
|
|
|
|
summary('gudev', have_libgudev, section: 'Options')
|
|
|
|
|
summary('Wacom', have_libwacom, section: 'Options')
|
|
|
|
|
summary('SM', have_sm, section: 'Options')
|
|
|
|
|
summary('Startup notification', have_startup_notification, section: 'Options')
|
|
|
|
|
summary('Introspection', have_introspection, section: 'Options')
|
2022-01-19 15:26:30 -05:00
|
|
|
summary('Documentation', have_documentation, section: 'Options')
|
2021-08-05 09:48:07 -04:00
|
|
|
summary('Profiler', have_profiler, section: 'Options')
|
|
|
|
|
summary('Xwayland initfd', have_xwayland_initfd, section: 'Options')
|
|
|
|
|
summary('Xwayland listenfd', have_xwayland_listenfd, section: 'Options')
|
|
|
|
|
summary('Safe X11 I/O errors', have_xsetioerrorexithandler, section: 'Options')
|
xwayland: Mark our X11 connection terminatable
The connection to the Xserver for the X11 window manager part of mutter
even on Wayland may prevent the Xserver from shutting down.
Currently, what mutter does is to check the X11 clients still connected
to Xwayland using the XRes extension, with a list of X11 clients that
can be safely ignored (typically the GNOME XSettings daemon, the IBus
daemon, pulseaudio and even mutter window manager itself).
When there is just those known clients remaining, mutter would kill
Xwayland automatically.
But that's racy, because between the time mutter checks with Xwayland
the remaining clients and the time it actually kills the process, a new
X11 client might have come along and won't be able to connect to
Xwayland that mutter is just about to kill.
Because of that, the feature “autoclose-xwayland” is marked as an
experimental feature in mutter and not enabled by default.
Thankfully, the Xserver has all it takes to manage that already, and
is even capable of terminating itself once all X11 clients are gone (the
-terminate option on the command line).
With XFixes version 6, the X11 clients can declare themselves
"terminatable", so that the Xserver could simply ignore those X11
clients when checking the remaining clients and terminate itself
automatically.
Use that mechanism to declare mutter's own connection to the Xserver as
"terminatable" when Xwayland is started on demand so that it won't hold
Xwayland alive for the sole purpose of mutter itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1794>
2021-03-17 10:44:45 -04:00
|
|
|
summary('Xwayland terminate delay', have_xwayland_terminate_delay, section: 'Options')
|
2021-08-05 09:48:07 -04:00
|
|
|
|
|
|
|
|
summary('Enabled', have_tests, section: 'Tests')
|
|
|
|
|
summary('Core tests', have_core_tests, section: 'Tests')
|
|
|
|
|
summary('Cogl tests', have_cogl_tests, section: 'Tests')
|
|
|
|
|
summary('Clutter tests', have_clutter_tests, section: 'Tests')
|
|
|
|
|
summary('Installed tests', have_installed_tests, section: 'Tests')
|
|
|
|
|
summary('Coverage', get_option('b_coverage'), section: 'Tests')
|